refresh patches

1 files changed, 0 insertions, 335 deletions

diff --git a/debian/patches/20_ipmi_impi b/debian/patches/20_ipmi_impi
deleted file mode 100644
index dd5a770..0000000
--- a/debian/patches/20_ipmi_impi
+++ /dev/null
@@ -1,335 +0,0 @@
-## 20ipmi_impi.dpatch by  <mjj29@debian.org>
-##
-## 20ipmi_impi, closes #412816
---- ipmitool-1.8.9-rc1/lib/ipmi_strings.c.orig	2005-05-15 06:26:33.000000000 +0200
-+++ ipmitool-1.8.9-rc1/lib/ipmi_strings.c	2005-10-23 15:22:57.000000000 +0200
-@@ -43,7 +43,7 @@
- /*
-  * From table 26-4 of the IPMI v2 specification
-  */
--const struct valstr impi_bit_rate_vals[] = {
-+const struct valstr ipmi_bit_rate_vals[] = {
- 	{ 0x00, "IPMI-Over-Serial-Setting"}, /* Using the value in the IPMI Over Serial Config */
- 	{ 0x06, "9.6" },
- 	{ 0x07, "19.2" },
---- ipmitool-1.8.9-rc1/lib/ipmi_sol.c.orig	2006-08-02 19:17:10.000000000 +0200
-+++ ipmitool-1.8.9-rc1/lib/ipmi_sol.c	2006-08-25 16:01:54.000000000 +0200
-@@ -108,7 +108,7 @@
- 
- 	memset(&req, 0, sizeof(req));
- 	req.msg.netfn    = IPMI_NETFN_TRANSPORT;
--	req.msg.cmd      = IMPI_GET_SOL_CONFIG_PARAMETERS;
-+	req.msg.cmd      = IPMI_GET_SOL_CONFIG_PARAMETERS;
- 	req.msg.data_len = 4;
- 	req.msg.data     = data;
- 
-@@ -485,10 +485,10 @@
- 		printf("%d,", params.retry_interval * 10);
- 
- 		printf("%s,",
--			   val2str(params.volatile_bit_rate, impi_bit_rate_vals));
-+			   val2str(params.volatile_bit_rate, ipmi_bit_rate_vals));
- 
- 		printf("%s,",
--			   val2str(params.non_volatile_bit_rate, impi_bit_rate_vals));
-+			   val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals));
- 
- 		printf("%d,", params.payload_channel);
- 		printf("%d\n", params.payload_port);
-@@ -516,10 +516,10 @@
- 			   params.retry_interval * 10);
- 
- 		printf("Volatile Bit Rate (kbps)        : %s\n",
--			   val2str(params.volatile_bit_rate, impi_bit_rate_vals));
-+			   val2str(params.volatile_bit_rate, ipmi_bit_rate_vals));
- 
- 		printf("Non-Volatile Bit Rate (kbps)    : %s\n",
--			   val2str(params.non_volatile_bit_rate, impi_bit_rate_vals));
-+			   val2str(params.non_volatile_bit_rate, ipmi_bit_rate_vals));
- 
- 		printf("Payload Channel                 : %d (0x%02x)\n",
- 			   params.payload_channel, params.payload_channel);
-@@ -554,7 +554,7 @@
- 
- 	memset(&req, 0, sizeof(req));
- 	req.msg.netfn    = IPMI_NETFN_TRANSPORT;           /* 0x0c */
--	req.msg.cmd      = IMPI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */
-+	req.msg.cmd      = IPMI_SET_SOL_CONFIG_PARAMETERS; /* 0x21 */
- 	req.msg.data     = data;
- 
- 	data[0] = channel;
-@@ -1105,7 +1105,7 @@
- 
- 
- /*
-- * impi_sol_deactivate
-+ * ipmi_sol_deactivate
-  */
- static int
- ipmi_sol_deactivate(struct ipmi_intf * intf)
-@@ -1451,7 +1451,7 @@
- 
- 
- /*
-- * impi_sol_activate
-+ * ipmi_sol_activate
-  */
- static int
- ipmi_sol_activate(struct ipmi_intf * intf, int looptest, int interval)
---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h.orig	2005-04-21 01:03:57.000000000 +0200
-+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_intf.h	2005-10-23 16:07:56.000000000 +0200
-@@ -96,7 +96,7 @@
- 	socklen_t addrlen;
- 
- 	/*
--	 * This struct holds state data specific to IMPI v2 / RMCP+ sessions
-+	 * This struct holds state data specific to IPMI v2 / RMCP+ sessions
- 	 */
- 	struct {
- 		enum LANPLUS_SESSION_STATE session_state;
---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h.orig	2005-01-07 03:05:45.000000000 +0100
-+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_user.h	2005-10-23 16:08:25.000000000 +0200
-@@ -44,7 +44,7 @@
- 
- 
- /*
-- * The GET USER ACCESS response from table 22-32 of the IMPI v2.0 spec
-+ * The GET USER ACCESS response from table 22-32 of the IPMI v2.0 spec
-  */
- struct user_access_rsp {
- #if WORDS_BIGENDIAN
---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h.orig	2005-05-11 07:46:40.000000000 +0200
-+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_strings.h	2005-10-23 15:22:19.000000000 +0200
-@@ -45,7 +45,7 @@
- 
- extern const struct valstr ipmi_channel_activity_type_vals[];
- extern const struct valstr ipmi_privlvl_vals[];
--extern const struct valstr impi_bit_rate_vals[];
-+extern const struct valstr ipmi_bit_rate_vals[];
- extern const struct valstr ipmi_set_in_progress_vals[];
- extern const struct valstr ipmi_authtype_session_vals[];
- extern const struct valstr ipmi_authtype_vals[];
---- ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h.orig	2005-05-11 07:46:40.000000000 +0200
-+++ ipmitool-1.8.9-rc1/include/ipmitool/ipmi_constants.h	2005-10-23 16:08:13.000000000 +0200
-@@ -42,9 +42,9 @@
-  * COMMANDS
-  */
- #define IPMI_GET_SDR_REPOSITORY_INFO            0x20
--#define IMPI_SOL_ACTIVATING                     0x20
--#define IMPI_SET_SOL_CONFIG_PARAMETERS          0x21
--#define IMPI_GET_SOL_CONFIG_PARAMETERS          0x22
-+#define IPMI_SOL_ACTIVATING                     0x20
-+#define IPMI_SET_SOL_CONFIG_PARAMETERS          0x21
-+#define IPMI_GET_SOL_CONFIG_PARAMETERS          0x22
- #define IPMI_SET_USER_ACCESS                    0x43
- #define IPMI_GET_USER_ACCESS                    0x44
- #define IPMI_SET_USER_NAME                      0x45
---- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c.orig	2006-08-03 18:26:06.000000000 +0200
-+++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.c	2006-08-25 16:06:37.000000000 +0200
-@@ -862,7 +862,7 @@
- /*
-  * read_open_session_reponse
-  *
-- * Initialize the ipmi_rs from the IMPI 2.x open session response data.
-+ * Initialize the ipmi_rs from the IPMI 2.x open session response data.
-  *
-  * The offset should point to the first byte of the the Open Session Response
-  * payload when this function is called.
-@@ -924,7 +924,7 @@
- /*
-  * read_rakp2_message
-  *
-- * Initialize the ipmi_rs from the IMPI 2.x RAKP 2 message
-+ * Initialize the ipmi_rs from the IPMI 2.x RAKP 2 message
-  *
-  * The offset should point the first byte of the the RAKP 2 payload when this
-  * function is called.
-@@ -1004,7 +1004,7 @@
- /*
-  * read_rakp4_message
-  *
-- * Initialize the ipmi_rs from the IMPI 2.x RAKP 4 message
-+ * Initialize the ipmi_rs from the IPMI 2.x RAKP 4 message
-  *
-  * The offset should point the first byte of the the RAKP 4 payload when this
-  * function is called.
-@@ -1212,7 +1212,7 @@
- /*
-  * read_ipmi_response
-  *
-- * Initialize the impi_rs from with the IPMI response specific data
-+ * Initialize the ipmi_rs from with the IPMI response specific data
-  *
-  * The offset should point the first byte of the the IPMI payload when this
-  * function is called. 
-@@ -1244,7 +1244,7 @@
- /*
-  * read_sol_packet
-  *
-- * Initialize the impi_rs with the SOL response data
-+ * Initialize the ipmi_rs with the SOL response data
-  *
-  * The offset should point the first byte of the the SOL payload when this
-  * function is called. 
-@@ -1562,32 +1562,32 @@
- 	 *------------------------------------------
- 	 */
- 	/* ipmi session Auth Type / Format is always 0x06 for IPMI v2 */
--	msg[IMPI_LANPLUS_OFFSET_AUTHTYPE] = 0x06;
-+	msg[IPMI_LANPLUS_OFFSET_AUTHTYPE] = 0x06;
- 
- 	/* Payload Type -- also specifies whether were authenticated/encyrpted */
--	msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type;
-+	msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] = payload->payload_type;
- 
- 	if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE)
- 	{
--		msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
-+		msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
- 			((session->v2_data.crypt_alg != IPMI_CRYPT_NONE	)? 0x80 : 0x00);
--		msg[IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
-+		msg[IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE] |=
- 			((session->v2_data.integrity_alg  != IPMI_INTEGRITY_NONE)? 0x40 : 0x00);
- 	}
- 
- 	if (session->v2_data.session_state == LANPLUS_STATE_ACTIVE)
- 	{
- 		/* Session ID  -- making it LSB */
--		msg[IMPI_LANPLUS_OFFSET_SESSION_ID    ] = session->v2_data.bmc_id         & 0xff;
--		msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8)  & 0xff;
--		msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff;
--		msg[IMPI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SESSION_ID    ] = session->v2_data.bmc_id         & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 1] = (session->v2_data.bmc_id >> 8)  & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 2] = (session->v2_data.bmc_id >> 16) & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SESSION_ID + 3] = (session->v2_data.bmc_id >> 24) & 0xff;
- 
- 		/* Sequence Number -- making it LSB */
--		msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM    ] = session->out_seq         & 0xff;
--		msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8)  & 0xff;
--		msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff;
--		msg[IMPI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM    ] = session->out_seq         & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 1] = (session->out_seq >> 8)  & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 2] = (session->out_seq >> 16) & 0xff;
-+		msg[IPMI_LANPLUS_OFFSET_SEQUENCE_NUM + 3] = (session->out_seq >> 24) & 0xff;
- 	}
- 
- 	/*
-@@ -1679,9 +1679,9 @@
- 	}
- 
- 	/* Now we know the payload length */
--	msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE    ] =
-+	msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE    ] =
- 		payload->payload_length        & 0xff;
--	msg[IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] =
-+	msg[IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE + 1] =
- 		(payload->payload_length >> 8) & 0xff;
- 
- 
-@@ -1745,14 +1745,14 @@
- 			2;
- 
- 		if (verbose > 2)
--			printbuf(msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input");
-+			printbuf(msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, hmac_input_size, "authcode input");
- 
- 
- 		/* Auth Code */
- 		lanplus_HMAC(session->v2_data.integrity_alg,
- 					 session->v2_data.k1,                /* key        */
- 					 20,                                 /* key length */
--					 msg + IMPI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */
-+					 msg + IPMI_LANPLUS_OFFSET_AUTHTYPE, /* hmac input */
- 					 hmac_input_size,
- 					 hmac_output,
- 					 &hmac_length);
-@@ -2529,7 +2529,7 @@
-  * ipmi_get_auth_capabilities_cmd
-  *
-  * This command may have to be sent twice.  We first ask for the
-- * authentication capabilities with the "request IMPI v2 data bit"
-+ * authentication capabilities with the "request IPMI v2 data bit"
-  * set.  If this fails, we send the same command without that bit
-  * set.
-  *
-@@ -2602,7 +2602,7 @@
- 
- 
- static int
--impi_close_session_cmd(struct ipmi_intf * intf)
-+ipmi_close_session_cmd(struct ipmi_intf * intf)
- {
- 	struct ipmi_rs * rsp;
- 	struct ipmi_rq req;
-@@ -2836,7 +2836,7 @@
- /*
-  * ipmi_lanplus_rakp1
-  *
-- * Build and send the RAKP 1 message as part of the IMPI v2 / RMCP+ session
-+ * Build and send the RAKP 1 message as part of the IPMI v2 / RMCP+ session
-  * negotiation protocol.  We also read and validate the RAKP 2 message received
-  * from the BMC, here.  See section 13.20 of the IPMI v2 specification for
-  * details.
-@@ -2990,7 +2990,7 @@
- /*
-  * ipmi_lanplus_rakp3
-  *
-- * Build and send the RAKP 3 message as part of the IMPI v2 / RMCP+ session
-+ * Build and send the RAKP 3 message as part of the IPMI v2 / RMCP+ session
-  * negotiation protocol.  We also read and validate the RAKP 4 message received
-  * from the BMC, here.  See section 13.20 of the IPMI v2 specification for
-  * details.
-@@ -3154,7 +3154,7 @@
- ipmi_lanplus_close(struct ipmi_intf * intf)
- {
- 	if (!intf->abort)
--		impi_close_session_cmd(intf);
-+		ipmi_close_session_cmd(intf);
- 
- 	if (intf->fd >= 0)
- 		close(intf->fd);
---- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h.orig	2005-03-17 00:17:37.000000000 +0100
-+++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus.h	2005-10-23 16:09:48.000000000 +0200
-@@ -84,11 +84,11 @@
- 
- 
- /* Session message offsets, from table 13-8 of the v2 specification */
--#define IMPI_LANPLUS_OFFSET_AUTHTYPE     0x04
--#define IMPI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05
--#define IMPI_LANPLUS_OFFSET_SESSION_ID   0x06
--#define IMPI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A
--#define IMPI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E
-+#define IPMI_LANPLUS_OFFSET_AUTHTYPE     0x04
-+#define IPMI_LANPLUS_OFFSET_PAYLOAD_TYPE 0x05
-+#define IPMI_LANPLUS_OFFSET_SESSION_ID   0x06
-+#define IPMI_LANPLUS_OFFSET_SEQUENCE_NUM 0x0A
-+#define IPMI_LANPLUS_OFFSET_PAYLOAD_SIZE 0x0E
- #define IPMI_LANPLUS_OFFSET_PAYLOAD      0x10
- 
- 
---- ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c.orig	2005-03-24 02:46:03.000000000 +0100
-+++ ipmitool-1.8.9-rc1/src/plugins/lanplus/lanplus_crypt.c	2005-10-23 16:10:06.000000000 +0200
-@@ -800,8 +800,8 @@
- 	lanplus_HMAC(session->v2_data.integrity_alg,
- 				 session->v2_data.k1,
- 				 IPMI_AUTHCODE_BUFFER_SIZE,
--				 rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE,
--				 rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
-+				 rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE,
-+				 rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
- 				 generated_authcode,
- 				 &generated_authcode_length);
- 
-@@ -809,8 +809,8 @@
- 	{
- 		lprintf(LOG_DEBUG+2, "Validating authcode");
- 		printbuf(session->v2_data.k1, 20, "K1");
--		printbuf(rs->data + IMPI_LANPLUS_OFFSET_AUTHTYPE,
--				 rs->data_len - IMPI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
-+		printbuf(rs->data + IPMI_LANPLUS_OFFSET_AUTHTYPE,
-+				 rs->data_len - IPMI_LANPLUS_OFFSET_AUTHTYPE - IPMI_SHA1_AUTHCODE_SIZE,
- 				 "Authcode Input Data");
- 		printbuf(generated_authcode, 12, "Generated authcode");
- 		printbuf(bmc_authcode,       12, "Expected authcode");