summaryrefslogtreecommitdiff
path: root/doc/ipmiutil.8
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
commita7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 (patch)
tree41c4deec1fdfbafd7821b4ca7a9772ac0abd92f5 /doc/ipmiutil.8
Imported Upstream version 2.9.3upstream/2.9.3
Diffstat (limited to 'doc/ipmiutil.8')
-rw-r--r--doc/ipmiutil.8116
1 files changed, 116 insertions, 0 deletions
diff --git a/doc/ipmiutil.8 b/doc/ipmiutil.8
new file mode 100644
index 0000000..24d0a3a
--- /dev/null
+++ b/doc/ipmiutil.8
@@ -0,0 +1,116 @@
+.TH IPMIUTIL 8 "Version 1.1: 10 May 2012"
+.SH NAME
+ipmiutil \- a meta-command to invoke various IPMI functions.
+
+.SH SYNOPSIS
+.B "ipmiutil <command> [-x -NUPREFJTVY] [other command options]
+
+.SH DESCRIPTION
+This utility performs various IPMI functions. Each of the individual
+commands in the ipmiutil project can be invoked via this meta-command.
+The <command> is one of the following:
+ alarms show/set the front panel alarm LEDs and relays
+ leds show/set the front panel alarm LEDs and relays
+ cmd send a specified raw IPMI command to the BMC
+ config list/save/restore BMC configuration parameters
+ dcmi get/set DCMI parameters
+ discover discover all IPMI servers on this LAN
+ ekanalyzer run FRU-EKeying analyzer on FRU files (deprecated, see fru)
+ events decode IPMI events and display them
+ firewall show/set firmware firewall functions
+ fru show decoded FRU inventory data, write asset tag
+ fwum OEM firmware update manager extensions
+ getevt get IPMI events and display them, event daemon
+ getevent get IPMI events and display them, event daemon
+ health check and show the basic health of the IPMI BMC
+ hpm HPM firmware update manager extensions
+ lan show/set IPMI LAN parameters and PEF table
+ picmg show/set picmg extended functions
+ reset cause the BMC to reset or power down the system
+ sel show/clear firmware System Event Log records
+ sensor show Sensor Data Records, readings, thresholds
+ serial show/set IPMI Serial & Terminal Mode parameters
+ sol start/stop an SOL console session
+ smcoem SuperMicro OEM functions
+ sunoem Sun OEM functions
+ delloem Dell OEM functions
+ tsol Tyan SOL console start/stop session
+ wdt show/set/reset the watchdog timer
+.br
+For help on each command (e.g. 'sel'), enter:
+ ipmiutil sel -?
+.br
+For man pages on each command, its man page is named "i<command>",
+or refer to SEE ALSO below.
+
+.br
+This utility can use either the /dev/ipmi0 driver from OpenIPMI,
+the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux,
+direct user-space IOs, or the IPMI LAN interface if \-N is used.
+
+.SH OPTIONS
+Command options are described in the man page for each command.
+Below are a few of the common options.
+.IP "-x"
+Causes extra debug messages to be displayed.
+.IP "-N nodename"
+Nodename or IP address of the remote target system. If a nodename is
+specified, IPMI LAN interface is used. Otherwise the local system
+management interface is used.
+.IP "-U rmt_user"
+Remote username for the nodename given. The default is a null username.
+.IP "-P/-R rmt_pswd"
+Remote password for the nodename given. The default is a null password.
+.IP "-E"
+Use the remote password from Environment variable IPMI_PASSWORD.
+.IP "-F drv_t"
+Force the driver type to one of the followng:
+imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
+Note that lan2i means lan2 with intelplus.
+The default is to detect any available driver type and use it.
+.IP "-J"
+Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
+1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
+5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
+Default is 3.
+.IP "-T"
+Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
+.IP "-V"
+Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
+.IP "-Y"
+Yes, do prompt the user for the IPMI LAN remote password.
+Alternatives for the password are \-E or \-P.
+
+.SH "EXAMPLES"
+ipmiutil sel
+.br
+Shows the IPMI System Event Log entries.
+.PP
+ipmiutil wdt
+.br
+Shows the watchdog timer values.
+.PP
+
+.SH "SEE ALSO"
+ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifirewall(8)
+ifru(8) ifruset(8) ifwum(8) igetevent(8) ihealth(8) ihpm(8)
+ilan(8) ipicmg(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) isunoem(8)
+iwdt(8) ipmiutil(8) ipmi_port(8)
+
+.SH WARNINGS
+See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
+
+.SH COPYRIGHT
+Copyright (C) 2009 Kontron America, Inc.
+.PP
+See the file COPYING in the distribution for more details
+regarding redistribution.
+.PP
+This utility is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY.
+
+.SH AUTHOR
+.PP
+Andy Cress <arcress at users.sourceforge.net>
+.br
+