Updated version 3.0.6 from 'upstream/3.0.6'

with Debian dir 5538bf70e263e154d55e3077e841548417b46966

1 files changed, 33 insertions, 8 deletions

diff --git a/util/oem_supermicro.c b/util/oem_supermicro.c
index d733213..94024b2 100644
--- a/util/oem_supermicro.c
+++ b/util/oem_supermicro.c
@@ -68,7 +68,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 void set_loglevel(int level);  /*prototype */
 extern char fsm_debug;  /*mem_if.c*/
 
-static char * progver   = "3.05";
+static char * progver   = "3.06";
 static char * progname  = "ismcoem";
 static int verbose = 0;
 static char fdebug = 0;
@@ -433,6 +433,7 @@ int decode_sensor_supermicro(uchar *sdr,uchar *reading,char *pstring, int slen,
    snum = sdr[7];   /*sdr01->sens_num*/
    stype = sdr[12]; /*sensor_type*/
    etype = sdr[13]; /*sdr01->ev_type*/
+   get_mfgid(&vend_id,&prod_id); /*saved from ipmi_getdeviceid */
    /* sdr[3] rec_type is 0x01 for Full, 0x02 for Compact */
    if ((sdr[3] == 0x01) && (etype == 0x01)) { /* full threshold sensor */
 	  /*if Temp sensor, bits==0 would show BelowCrit, so handle normally */
@@ -497,6 +498,14 @@ int decode_sensor_supermicro(uchar *sdr,uchar *reading,char *pstring, int slen,
              default:  rv = -1;  break;
           }
            break;
+        case 0x29:  /* VBAT sensor */
+           if (prod_id == 0x0917) { /*X11DRi has inert VBAT full sensor*/
+			 if (bval == 0) {
+                pstr = "NotAvailable";
+			    rv = 0;
+			 }
+           }
+           break;
         default:
            break;
    }
@@ -661,9 +670,9 @@ int decode_sel_supermicro(uchar *evt, char *outbuf, int outsz, char fdesc,
 	   sevid = SEV_MAJ; 
 	   rv = 0;
 	   break;
-     case 0xC8:      /* Observed Event: Temp/Cooling issue, reboots */
+     case 0xC8:      /* Observed Event: AC Power on event */
 	   /* usually OEM(c8) #ff - 6f [a0 ff ff] */
-	   pstr = "OEMC8: Temp/Cooling fault";
+	   pstr = "OEMC8: AC Power On";
 	   sevid = SEV_MAJ; 
 	   rv = 0;
 	   break;
@@ -686,7 +695,7 @@ static int factory_defaults(int mode)
    uchar idata[16];
    uchar cc;
   /* 
-   From SMC IPMICFG -fde session:
+   From SMC IPMICFG -fde  factory defaults session:
    start_kcs_transaction - 18 01    (get_device_id)
    start_kcs_transaction - 18 25    (watchdog get)
    start_kcs_transaction - b0 00 00 (unknown, invalid)
@@ -695,6 +704,12 @@ static int factory_defaults(int mode)
    start_kcs_transaction - 18 01    (get_device_id)
    start_kcs_transaction - c0 41    (reset_factory_defaults, -fde)
   */
+   if ((prod_id > 2200) && (prod_id < 2300) && (mode == 0)) {
+      /* use netfn 3c, cmd 40 for X11?  */
+      /* similar to ipmitool raw 0x3c 0x40 */
+	  if (fdebug) printf("may also need ipmiutil cmd 00 20 f0 40\n");
+      // mode = 3;
+   }
 
    /* b0 00 00: cmd=00 netfn=2C */
    rlen = sizeof(rdata);
@@ -705,7 +720,7 @@ static int factory_defaults(int mode)
    if (fdebug) printf("b0 00 returned %d\n",rv);
    /* if (rv != 0) return(rv); */
 
-   if (mode == 2) {
+   if (mode == 2) {  /* (get_system_guid) */
      rlen = sizeof(rdata);
      rv = ipmi_cmdraw(0x37, (0x18 >> 2), BMC_SA, PUBLIC_BUS, BMC_LUN,
 			    idata, 0, rdata, &rlen, &cc, fdebug);
@@ -714,10 +729,15 @@ static int factory_defaults(int mode)
      if (rv != 0) return(rv);
    }
 
-   /* reset factory defaults cmd=0x41 netfn=0x30 (netfn/lun=0xC0) */
+   /* reset factory defaults */
    rlen = sizeof(rdata);
-   rv = ipmi_cmdraw(0x41, (0xc0 >> 2), BMC_SA, PUBLIC_BUS, BMC_LUN,
-		    idata, 0, rdata, &rlen, &cc, fdebug);
+   if (mode == 3) { /* cmd=0x40 netfn=0x3c (netfn/lun=0xF0) */
+     rv = ipmi_cmdraw(0x40, 0x3c, BMC_SA, PUBLIC_BUS, BMC_LUN,
+		       idata, 0, rdata, &rlen, &cc, fdebug);
+   } else { /* cmd=0x41 netfn=0x30 (netfn/lun=0xC0) if X10 or less */
+     rv = ipmi_cmdraw(0x41, (0xc0 >> 2), BMC_SA, PUBLIC_BUS, BMC_LUN,
+		       idata, 0, rdata, &rlen, &cc, fdebug);
+   }
    if ((rv == 0) && (cc != 0)) rv = cc;
    if (fdebug) printf("factory default reset returned %d\n",rv);
    if (rv != 0) return(rv);
@@ -743,6 +763,11 @@ static int ipmi_smcoem_main(int  argc, char **argv)
    char msg[80];
    uchar val;
 
+   if ((vend_id != VENDOR_SUPERMICRO) && (vend_id != VENDOR_SUPERMICROX)) {
+      printf("Not SuperMicro firmware, ignoring smcoem\n");
+      usage();
+      return(ERR_USAGE);
+   }
    if (strncmp(argv[0],"intrusion",9) == 0) {
       printf("Clearing Chassis Intrusion ...\n");
       rv = oem_supermicro_reset_intrusion();