diff options
Diffstat (limited to 'doc/idelloem.8')
| -rw-r--r-- | doc/idelloem.8 | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/doc/idelloem.8 b/doc/idelloem.8 new file mode 100644 index 0000000..997fe16 --- /dev/null +++ b/doc/idelloem.8 @@ -0,0 +1,177 @@ +.TH IDELLOEM 8 "Version 1.0: 17 Aug 2011" +.SH NAME +ipmiutil_delloem \- OEM commands for Dell servers +.SH SYNOPSIS +.B "ipmiutil delloem [-mx -NPRUEFJTVY] commands" + +.SH DESCRIPTION +.I ipmiutil delloem commands +is a program that uses Dell OEM IPMI commands to +perform platform-specific functions. + +.SH OPTIONS + +.IP "-m 002000" +Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). +This could be used for PICMG or ATCA blade systems. +The trailing character, if present, indicates SMI addressing if 's', +or IPMB addressing if 'i' or not present. +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + +.SH COMMANDS + +.RS +.RE +.TP +\fImac\fP \fIlist\fP +.RS + Lists the MAC address of LOMs + +.RE +.TP +\fImac\fP \fIget\fP <\fBNIC number\fR> +.RS + Shows the MAC address of specified LOM. 0-7 System LOM, 8- DRAC/iDRAC. + +.RE +.TP +\fIlan\fP \fIset\fP <\fBMode\fR> +.RS + Sets the NIC Selection Mode (dedicated, shared, + shared with failover lom2, shared with Failover all loms). + +.RE +.TP +\fIlan\fP \fIget\fP +.RS + Returns the current NIC Selection Mode (dedicated, shared, + shared with failover lom2, shared with Failover all loms). + +.RE +.TP +\fIlan\fP \fIget\fP \fIactive\fP +.RS + Returns the current active NIC (dedicated, LOM1, LOM2, LOM3, LOM4). + +.RE +.TP +\fIpowermonitor\fP +.RS + Shows power tracking statistics + +.RE +.TP +\fIpowermonitor\fP \fIclear\fP \fIcumulativepower\fP +.RS + Reset cumulative power reading + +.RE +.TP +\fIpowermonitor\fP \fIclear\fP \fIpeakpower\fP +.RS + Reset peak power reading + +.RE +.TP +\fIpowermonitor\fP \fIpowerconsumption\fP +.RS + Displays power consumption in <watt|btuphr> + +.RE +.TP +\fIpowermonitor\fP \fIpowerconsumptionhistory\fP <\fBwatt|btuphr\fR> +.RS + Displays power consumption history + +.RE +.TP +\fIpowermonitor\fP \fIgetpowerbudget\fP +.RS + Displays power cap in <watt|btuphr> + +.RE +.TP +\fIpowermonitor\fP \fIsetpowerbudget\fP <\fBval\fR> <\fBwatt|btuphr|percent\fR> +.RS + Allows user to set the power cap in <watt|BTU/hr|percentage> + +.RE +.TP +\fIpowermonitor\fP \fIenablepowercap\fP +.RS + To enable set power cap + +.RE +.TP +\fIpowermonitor\fP \fIdisablepowercap\fP +.RS + To disable set power cap + +.RE +.TP +\fIwindbg\fP \fIstart\fP +.RS + Starts the windbg session (Cold Reset & SOL Activation) + +.RE +.TP +\fIwindbg\fP \fIend\fP +.RS + Ends the windbg session (SOL Deactivation) + +.RE +.TP +\fIvFlash\fP \fIinfo\fP \fICard\fP +.RS + Shows Extended SD Card information +.RE + + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress <arcress at users.sourceforge.net> +.br + |