diff options
Diffstat (limited to 'doc/ireset.8')
| -rw-r--r-- | doc/ireset.8 | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/doc/ireset.8 b/doc/ireset.8 new file mode 100644 index 0000000..a018000 --- /dev/null +++ b/doc/ireset.8 @@ -0,0 +1,118 @@ +.TH IRESET 8 "Version 1.5: 01 Jul 2011" +.SH NAME +ipmiutil_reset \- perform a hardware reset on the system +.SH SYNOPSIS +.B "ipmiutil reset [-bcdDefhijmnoprsuwxy -N node -U user -P/-R pswd -EFJTVY]" + +.SH DESCRIPTION +.I ipmiutil reset +is a program that uses IPMI commands to +perform a hardware reset of the chassis, or boot to a specific +device. +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N. + +.SH OPTIONS +Command line options are described below. +.IP "-c" +Power Cycle the system chassis +.IP "-d" +Power Down the system chassis +.IP "-n" +Send NMI to the system +.IP "-u" +Power Up the system chassis +.IP "-r" +Hard Reset the system chassis +.IP "-D" +Do a soft shutdown of the OS, and then power down. +Note that remote soft shutdown (\-D \-N) for Intel S5000 baseboard requires +ipmiutil getevt \-a running on the target server. +.IP "-o" +Do a soft shutdown of the OS, and then reset. +Note that remote soft shutdown (\-o \-N) for Intel S5000 baseboard requires +ipmiutil getevt \-a running on the target server. +.IP "-k" +Do a cold reset to restart the BMC firmware. +.IP "-m 002000s" +Perform these function for a specific MC (e.g. bus 00, sa 20, lun 00). +The trailing character, if present, indicates SMI addressing if 's', +or IPMB addressing if 'i' or not present. +.IP "-b" +Do a hard reset and reboot to the BIOS Setup menu, for this reboot only. +.IP "-e" +Do a hard reset to EFI, if IPMI EFI boot is enabled, for this reboot only. +.IP "-f" +Do a hard reset to Floppy/Removable, for this reboot only. +.IP "-h" +Do a hard reset to a Hard Disk, for this reboot only. +.IP "-i" +Set the boot Initiator mailbox string, usually for PXE use. +The string must be less than 78 characters. +.IP "-j" +Set the IANA number used for the boot Initiator mailbox string. +.IP "-p" +Do a hard reset and network boot to PXE server, for this reboot only. +.IP "-s" +Do a hard reset and reboot to the Service/Diagnostic Partition, for this +reboot only. Reboots to the default if no service partition is configured. +.IP "-v" +Do a hard reset to DVD/CDROM Media, for this reboot only. +.IP "-w" +Wait for BMC ready after a reset before exiting the utility. +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-y" +Yes, try to persist any boot options used [\-befhprsv]. This requires the IPMI +firmware to ask the BIOS to change boot order settings, so it may not +be supported by all BMC firmware vendors. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress <arcress at users.sourceforge.net> +.br + |