From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- README | 156 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100644 README (limited to 'README') diff --git a/README b/README new file mode 100644 index 0000000..1d58b89 --- /dev/null +++ b/README @@ -0,0 +1,156 @@ + + ------------------------------ + ipmiutil README + IPMI Management Utilities + ------------------------------ + +The ipmiutil IPMI utilities below allow the user to access the firmware +System Event Log and configure the Platform Event Filter table for the new +'OS Critical Stop' records, as well as other common IPMI system management +functions. + +ipmiutil - a meta-command to invoke all of the below as sub-commands +ievents - a standalone utility to interpret IPMI and PET event data +isel - show/set the firmware System Event Log records +isensor - show Sensor Data Records, sensor readings, and thresholds +ireset - cause the BMC to hard reset or power down the system +ilan - show and configure the BMC LAN port and Platform Event Filter + table to allow BMC LAN alerts from firmware events and + OS Critical Stop messages, +iserial - show and configure the BMC Serial port for various modes, + such as Terminal Mode. +ifru - show the FRU chassis, board, and product inventory data, + and optionally write a FRU asset tag. +ialarms - show and set front panel alarms (LEDs and relays) +iwdt - show and set watchdog timer parameters +igetevent - receive any IPMI events and display them +ihealth - check and report the basic health of the IPMI BMC +iconfig - list/save/restore the BMC configuration parameters +icmd - send specific IPMI commands to the BMC, + mainly for testing and debug purposes. +idiscover - discover the available IPMI LAN nodes on a subnet +isol - start/stop an IPMI Serial-Over-LAN Console session +ipicmg - show/set the IPMI PICMG parameters +ifirewall - show/set the IPMI firmware firewall configuration +iekanalyzer - run FRU-EKeying analyzer on FRU files +ifwum - OEM firmware update manager extensions +ihpm - HPM firmware update manager extensions +isunoem - Sun OEM functions +idelloem - Dell OEM functions +itsol - Tyan SOL console start/stop session +idcmi - get/set DCMI parameters, if supporting the DCMI spec + +Other supporting files: +checksel = cron script using ipmiutil sel to check the SEL, write new + events to the OS system log, and clear the SEL if nearly full. +ipmi_port = daemon to bind the RMCP port and sleep to prevent + Linux portmap from stealing the RMCP port +ipmi_port.sh = init script to reserve the RMCP port from portmap, + this also restores saved sensor thresholds, if any. +ipmiutil_wdt = init script to restart watchdog timer every 60 sec via cron +ipmiutil_asy = init script runs 'ipmiutil getevt -a' for remote shutdown +ipmiutil_evt = init script runs 'ipmiutil getevt -s' for monitoring events +evt.sh = sample script which can be invoked by ipmiutil_evt +ipmi_if.sh = script using dmidecode to determine the IPMI Interface Type +bmclanpet.mib = SNMP MIB for BMC LAN Platform Event Traps +test/* = scripts and utilities used in testing ipmiutil/panicsel +kern/* = kernel patches for panic handling + +-------------------- + Dependencies: +-------------------- +The IPMI Management Utilities currently work with platforms that +support the IPMI 1.5 or 2.0 specification. IPMI servers can be managed +locally, or remotely via IPMI LAN, even when the OS or main CPU is not +functional. + +The IPMI 1.5 spec, Table 36-3 defines the sensor types for SEL records, +as used by showsel. +The IPMI 1.5 spec, Table 15-2 defines the Platform Event Filter table +entries, as used by pefconfig. +The IPMI 1.5 spec, Table 19-4 defines the LAN Configuration Parameters, +as used by pefconfig. + +The ipmiutil utilities will use an IPMI Driver, either the Intel IPMI package +(ipmidrvr, /dev/imb), MontaVista OpenIPMI (/dev/ipmi0), the valinux IPMI +Driver (/dev/ipmikcs), or the LANDesk ldipmi daemon. The ipmiutil utilities +can also use direct user-space I/Os in Linux or FreeBSD if no IPMI driver +is detected. + +If ipmiutil is compiled with LANPLUS enabled, then it does depend upon +libcrypto.so, which is provided by the openssl package. + +------------------------ + Build Instructions +------------------------ + +See notes in the INSTALL file from the ipmiutil*.tar.gz archive. + +------------------------ + IPMI Configuration +------------------------ +See http://ipmiutil.sourceforge.net/docs/UserGuide + +Note that ipmiutil can autodetect the IPMI interface using SMBIOS/dmi +and use driverless KCS or SSIF if no IPMI driver is loaded. + +Various vendor IPMI firmware versions should support all of the +mandatory IPMI functions, but there are variations in which of +the optional IPMI functions that are supported. + +The 'ipmiutil lan' utility can be used to easily set up a working +configuration of BMC LAN, SOL, and PEF Alerting while Linux is running, +instead of a series of 40-50 commands with ipmitool, or a proprietary +vendor tool, which may even require booting to DOS. + +The bmc_panic patch has been obsoleted by the CONFIG_IPMI_PANIC option +in the OpenIPMI driver, which is included in kernel.org. +The bmc_panic functionality is also included in the Intel imb IPMI driver +build 28 and greater. +To apply the bmc_panic patch (in kern/) to a different version of kernel source: + kver=2.4.18 + cd /usr/src/linux-${kver} + cat bmcpanic-${kver}.patch | patch -p1 + make menuconfig (make sure CONFIG_BMCPANIC=y) + make oldconfig + make dep + make bzImage + make modules + make modules_install + mkinitrd -f /boot/initrd-${kver}.img ${kver} + make install + reboot + +The ipmiutil package does not set the Linux kernel panic timeout. +If a specific panic timeout is desired, do +"echo 10 >/proc/sys/kernel/panic" to set it to 10 seconds, for instance. +or add panic=10 to the kernel line in grub.conf. + +------------------------------ + KNOWN PROBLEMS +------------------------------ + +See http://sourceforge.net/tracker/?group_id=116222&func=browse for +a list of bugs. + +Contact for best-effort support: arcress at users.sourceforge.net or +ipmiutil-developers at lists.sourceforge.net or http://ipmiutil.sf.net + +-------------------- + LICENSING: +-------------------- +The BSD License in the COPYING file applies to all source files +herein, except for + * util/md5.c (Aladdin unrestricted license, compatible with BSD) + * util/md2.h (GPL) + * util/ipmi_ioctls.h (GPL, now defunct and removed) +While the BSD License allows code reuse in both open and non-open +applications, the md2.h and ipmi_ioctls.h files would have to be removed +if used in a non-open application. There is a ALLOW_GPL compile flag +for this that is disabled by default, but can be enabled for GPL +open-source by running "./configure --enable-gpl". + +-------------------- + CHANGE HISTORY: +-------------------- +See http://ipmiutil.sourceforge.net/docs/ChangeLog -- cgit v1.2.3