From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/iconfig.8 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 doc/iconfig.8 (limited to 'doc/iconfig.8') diff --git a/doc/iconfig.8 b/doc/iconfig.8 new file mode 100644 index 0000000..d95ed0b --- /dev/null +++ b/doc/iconfig.8 @@ -0,0 +1,96 @@ +.TH ICONFIG 8 "Version 1.4: 17 Feb 2010" +.SH NAME +ipmiutil_config \- list, save, and restore BMC configuration parameters +.SH SYNOPSIS +.B "ipmiutil config [-lpxLNUPREFJTVY] [-r file] [-s file]" + +.SH DESCRIPTION +.I ipmiutil config +is a program that uses an IPMI driver to send IPMI commands which list, +save and restore BMC configuration parameters for LAN, Serial, PEF, +SOL, User, Channel. This combines the functionality of ipmiutil lan (ilan) +and ipmiutil serial (iserial). +Note that some of the LAN parameters cannot be restored remotely over +the IPMI LAN, changing the configuration that is in use. +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N. + +.SH OPTIONS +Command line options are described below. + +.IP "-l" +Lists BMC configuration parameters with a keyword, index, and its hex values. +This is the default behavior if no options are specified. +.IP "-r config_file" +Restores BMC configuration from config_file, which was produced with \-s below. +.IP "-s config_file" +Saves BMC configuration to config_file. This file could be edited, in certain +cases, such as to vary the BMC IP address (LanParam 3), or to use the +UserPassword records. Note that lines beginning with '#' are comments +and are ignored. +For editing UserPassword records, convert your text value to hex format; +for example "echo 'mypassword' |od \-t x1", and leave off the trailing 0a. +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-p password_to_set" +This specifies the firmware password to set for BMC LAN access for all users +during the restore. +If not specified, the password configuration will not be changed, unless a +valid UserPassword record is present in the file to be restored. +Note that user passwords are write-only via standard IPMI commands. +.IP "-L lan_ch_num" +This specifies the IPMI LAN channel number used for BMC LAN. This varies +by platform, and can be found in the platform technical specifications. +By default, bmcconfig scans all IPMI channels to find a LAN channel for +BMC LAN. + +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3