From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/ifruset.8 | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 doc/ifruset.8 (limited to 'doc/ifruset.8') diff --git a/doc/ifruset.8 b/doc/ifruset.8 new file mode 100644 index 0000000..9f72eda --- /dev/null +++ b/doc/ifruset.8 @@ -0,0 +1,122 @@ +.TH IFRUSET 8 "Version 1.0: 14 Apr 2010" +.SH NAME +ifruset \- show/set Field Replacable Unit configuration data +.SH SYNOPSIS +.B "ifruset [-bcimx -unpvsafo -N node -U user -P/-R pswd -EFJTVY]" + +.SH DESCRIPTION +.I ifruset +is a program that uses IPMI commands to +show FRU configuration data and optionally +write any Product area fields into the FRU data. +Setting the FRU Product area fields is a function +that might be done by a manufacturer or system integrator. +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if -N. + +This program is not built or installed by default. +Integrators who wish to use it should build ipmiutil from source, +then do 'cd util; make ifruset'. + +.SH OPTIONS +Command line options are described below. +.IP "-u manuf" +This option specifies a product manufacturer string to be written +to the baseboard FRU Product area field 0. This field can be +any string up to 20 characters. The default is to not modify this FRU field. +.IP "-n name" +This option specifies a product name string to be written +to the baseboard FRU Product area field 1. This field can be +any string up to 20 characters. The default is to not modify this FRU field. +.IP "-p partnum" +This option specifies a product part number string to be written +to the baseboard FRU Product area field 2. This field can be +any string up to 20 characters. The default is to not modify this FRU field. +.IP "-v prod_ver" +This option specifies a product version number string to be written +to the baseboard FRU Product area field 3. The version number can be +any string up to 20 characters. The default is to not modify this FRU field. +.IP "-s serial_num" +This option specifies a serial number string to be written +to the baseboard FRU Product area field 4. The serial number can be +any string up to 20 characters. The default is to not modify this FRU field. +.IP "-a asset_string" +This option specifies an asset tag string to be written +to the baseboard FRU Product area field 5. The asset tag length is +limited by the existing FRU Product data, but is usually +allowed up to 20 characters. The default is to not modify this FRU field. +.IP "-f fruid" +This option specifies a product FRU file ID string to be written +to the baseboard FRU Product area field 6. This field can be +any string up to 20 characters. +.IP "-o oem" +This option specifies a product OEM field string to be written +to the baseboard FRU Product area field 7. This field can be +any string up to 20 characters. + +.IP "-b" +Only show the Baseboard FRU data. The default behavior is to also scan +for any SDR FRU data or DIMM SPD data referenced by the SDRs. +.IP "-c" +Show FRU output in a canonical format, with a default delimiter of '|'. +.IP "-i 00" +This option specifies a specific FRU ID to show. The input value should be +in hex (0b, 1a, etc.), as shown from the sensor SDR output. +By default, all FRU IDs that are specified in the FRU locator SDRs are shown. +.IP "-m 002000" +Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). +This could be used for PICMG or ATCA blade systems. +The trailing character, if present, indicates SMI addressing if 's', +or IPMB addressing if 'i' or not present. +.IP "-x" +Causes eXtra debug messages to be displayed. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are -E or -P. + + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3