From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/ihealth.8 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 doc/ihealth.8 (limited to 'doc/ihealth.8') diff --git a/doc/ihealth.8 b/doc/ihealth.8 new file mode 100644 index 0000000..8d510f4 --- /dev/null +++ b/doc/ihealth.8 @@ -0,0 +1,93 @@ +.TH IHEALTH 8 "Version 1.1: 17 Feb 2010" +.SH NAME +ipmiutil_health\- show IPMI health +.SH SYNOPSIS +.B "ipmiutil health [-ifhglmnopqsx -N node -U user -P/-R pswd -EFJTVY]" + +.SH DESCRIPTION +.I ipmiutil health +is a program that uses IPMI commands to +show the health of the BMC. +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N. + +.SH OPTIONS +Command line options are described below. + +.IP "-c" +Show canonical, delimited output. +.IP "-f" +Show the FRUSDR version also. +.IP "-g" +Show the IPMI GUID of this system. The GUID is a read-only unique identifier. +.IP "-h" +Check the health of the HotSwap Controller also. +.IP "-l" +Show the IPMI LAN channel statistics also. +.IP "-m 002000" +Target a specific MC (e.g. bus 00, sa 20, lun 00). +This could be used for PICMG or ATCA blade systems. +The trailing character, if present, indicates SMI addressing if 's', +or IPMB addressing if 'i' or not present. +.IP "-n string" +Set the System Name to this string in the IPMI System Information. +.IP "-o string" +Set the Primary Operating System to this string in the IPMI System Information. +.IP "-p 1" +Set the chassis Power restore policy, governing the desired behavior when power was lost and is restored. Values: 0 = stay off, 1 = last state, 2 = always on. +.IP "-q string" +Set the Secondary Operating System to this string in the IPMI System Information. +.IP "-s" +Show the IPMI Session information also. +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3