From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/ipicmg.8 | 157 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 doc/ipicmg.8 (limited to 'doc/ipicmg.8') diff --git a/doc/ipicmg.8 b/doc/ipicmg.8 new file mode 100644 index 0000000..0f4523f --- /dev/null +++ b/doc/ipicmg.8 @@ -0,0 +1,157 @@ +.TH IPICMG 8 "Version 1.0: 04 Jun 2010" +.SH NAME +ipmiutil_picmg \- send specific PICMG extended IPMI commands + +.SH SYNOPSIS +.B "ipmiutil picmg [-mixNUPREFJTVY] parameters" + +.SH DESCRIPTION +This +.I ipmiutil picmg +subcommand sends specific PICMG/ATCA extended IPMI commands to the firmware. + +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N. + +.SH OPTIONS +Command line options are described below. +.IP "-i 00" +This option specifies a specific FRU ID to show. The input value should be +in hex (0b, 1a, etc.), as shown from the sensor SDR output. +The default FRU ID is zero (0). +.IP "-m 002000" +Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). +This could be used for PICMG or ATCA blade systems. +The trailing character, if present, indicates SMI addressing if 's', +or IPMB addressing if 'i' or not present. +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + +.SH PARAMETERS +\fIpicmg\fP \fBparameters\fR +.RS + +.TP +\fIproperties\fP +Get PICMG properties may be used to +obtain and print Extension major version information, PICMG identifier, +FRU Device ID and Max FRU Device ID. + +.TP +\fIaddrinfo\fP +.br + +Get address information. This command may return information on the Hardware +address, IPMB-0 Address, FRU ID, Site/Entity ID, and Site/Entity Type. +.TP +\fIfrucontrol\fP \fBfru id\fR \fBoptions\fR +.br + +Set various control options: +.RS +.TP +\fI0x00\fP - Cold Reset +.br +.TP +\fI0x01\fP - Warm Reset +.br +.TP +\fI0x02\fP - Graceful Reboot +.br +.TP +\fI0x03\fP - Issue Diagnostic Interrupt +.br +.TP +\fI0x04\fP - Quiesce [AMC only] +.br +.TP +\fI0x05-0xFF\fP - Cold Reset +.br +.RE +.TP +\fIactivate\fP \fBfru id\fR +.br + +Activate the specified FRU. +.TP +\fIdeactivate\fP \fBfru id\fR +.br + +Deactivate the specified FRU. +.TP +\fIpolicy\fP \fIget\fP \fBfru id\fR +.br + +Get FRU activation policy. +.TP +\fIpolicy\fP \fIset\fP \fBfru id\fR \fBlockmask\fR \fBlock\fR +.br + +Set FRU activation policy. \fBlockmask\fR is 1 or 0 to indicate action +on the deactivation or activation locked bit respectively. \fBlock\fR is +1 or 0 to set/clear locked bit. +.TP +\fIportstate\fP \fBset\fR|\fBgetall\fR|\fBgetgranted\fR|\fBgetdenied\fR \fBparameters\fR +.br + +Get or set various port states. See usage for parameter details. + + + +.SH "EXAMPLES" +ipmiutil picmg properties +.br +Gets PICMG properties from the default target address (slave address 0x20). +.PP +ipmiutil picmg \-N 192.168.1.1 \-U root \-P pswd addrinfo +.br +Gets PICMG Address Information from the specified IP address. + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) iconfig(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list. + +.SH COPYRIGHT +Copyright (C) 2010 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3