From a7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 6 Jul 2014 18:04:32 +0200 Subject: Imported Upstream version 2.9.3 --- doc/isel.8 | 137 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 doc/isel.8 (limited to 'doc/isel.8') diff --git a/doc/isel.8 b/doc/isel.8 new file mode 100644 index 0000000..a765e32 --- /dev/null +++ b/doc/isel.8 @@ -0,0 +1,137 @@ +.TH ISEL 8 "Version 1.4: 17 Feb 2010" +.SH NAME +ipmiutil_sel \- show firmware System Event Log records +.SH SYNOPSIS +.B "ipmiutil sel [-abcflswvx -N node -P/-R pswd -U user -EFJTVY]" + +.SH DESCRIPTION +.I ipmiutil sel +is a program that uses IPMI commands to +to read and display the System Event Log (SEL) which +is stored by the BMC firmware. IPMI commands are issued +to read each record, and, if specified, incrementally write +records that have not previously been read into the +Linux syslog (/var/log/messages). +This utility can use either the /dev/ipmi0 driver from OpenIPMI, +the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, +direct user-space IOs, or the IPMI LAN interface if \-N. + +.SH OPTIONS +Command line options are described below. + +.IP "-a string" +Add a SEL record with a string of up to 13 characters. Longer strings will +be truncated. Note that this should be used sparingly, but would be useful +for changes made to the hardware or firmware environment, like "Fan replaced" +or "flash FW2.1". + +.IP "-b bin_file" +Interpret a file containing raw binary/hex SEL data dumped in binary form, +such as that produced by "ipmitool sel writeraw bin_file". +Each set of 16 bytes in the file will be interpreted as an IPMI event. + +.IP "-c" +Show output in a canonical format, with a default delimiter of '|'. +(same as \-n). + +.IP "-d" +Deletes/Clears the SEL of all records. +If the SEL becomes full (free space = 0), it no longer accepts new records, +so the SEL should be cleared periodically (use checksel cron script). + +.IP "-e" +Show Extended sensor descriptions for events if run locally. +This option will attempt to get the full sensor description from +/var/lib/ipmiutil/sensor_out.txt, and also use its SDR to decode any raw +threshold values in the event, if present. + +.IP "-f sel_file" +Interpret a file containing raw ascii text SEL data captured with +ipmiutil sel \-r, or some other similar utility. +Each line in the file should be in this +form, with no leading spaces: +.br +04 00 02 76 a9 4a 47 20 00 04 10 09 6f 42 0f ff +.br +Lines not in this format will be ignored. + +.IP "-l N" +Show last N SEL records, in reverse order (newest first). +For some BMC implementations, this may not show all N records specified. +.IP "-n" +Show output in a nominal/canonical format, with a default delimiter of '|'. +(same as \-c). +.IP "-r" +Show the 16 raw hex bytes for each SEL entry. The default is to display +interpreted entries, and include relevant hex event bytes. +.IP "-p" +By default, all SEL records are displayed. This option +causes only the Panic events with sensor_type = 0x20 (OS Critical Stop) +to be displayed. +.IP "-s N" +Show only SEL events with severity N or greater. Severity 0=INF, 1=MIN, +2=MAJ, 3=CRT. The default is to show all SEL events. +.IP "-u" +Show the SEL time as UTC and also get the SEL Time UTC offset if that +command is supported. The default is to convert the SEL Time to local time. +.IP "-v" +Only show the version information. This shows: the ipmiutil sel utility +version, the BMC version, the IPMI version, the SEL version, and the amount +of free space in the SEL. +.IP "-w" +This option writes SEL records to the Linux syslog (/var/log/messages) +or Windows Application Log. It only writes SEL records that have +timestamps newer than the last record written to syslog. +It saves the last timestamp in an index file named +/usr/share/ipmiutil/sel.idx (.\\sel.idx in Windows). +.IP "-x" +Causes extra debug messages to be displayed. +.IP "-N nodename" +Nodename or IP address of the remote target system. If a nodename is +specified, IPMI LAN interface is used. Otherwise the local system +management interface is used. +.IP "-U rmt_user" +Remote username for the nodename given. The default is a null username. +.IP "-P/-R rmt_pswd" +Remote password for the nodename given. The default is a null password. +.IP "-E" +Use the remote password from Environment variable IPMI_PASSWORD. +.IP "-F drv_t" +Force the driver type to one of the followng: +imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. +Note that lan2i means lan2 with intelplus. +The default is to detect any available driver type and use it. +.IP "-J" +Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, +1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, +5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. +Default is 3. +.IP "-T" +Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM. +.IP "-V" +Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level. +.IP "-Y" +Yes, do prompt the user for the IPMI LAN remote password. +Alternatives for the password are \-E or \-P. + +.SH "SEE ALSO" +ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isensor(8) iserial(8) isol(8) iwdt(8) + +.SH WARNINGS +See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any +bug fix list. + +.SH COPYRIGHT +Copyright (C) 2009 Kontron America, Inc. +.PP +See the file COPYING in the distribution for more details +regarding redistribution. +.PP +This utility is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY. + +.SH AUTHOR +.PP +Andy Cress +.br + -- cgit v1.2.3