/*
 * hpiwdt.c
 *
 * Copyright (c) 2003-2004 Intel Corporation.
 *
 * This tool reads and enables the watchdog timer via HPI.
 * Note that there are other methods for doing this, and the
 * standard interface is for the driver to expose a /dev/watchdog
 * device interface.
 * WARNING: If you enable/reset the watchdog, make sure you have 
 * something set up to keep resetting the timer at regular intervals, 
 * or it will reset your system.
 *
 * Author:  Andy Cress  arcress at users.sourceforge.net
 * 
 * 05/02/03 Andy Cress - created
 * 06/06/03 Andy Cress - added more logic with beta2 SPI release
 * 06/11/03 Andy Cress - successful test of options to set WDT values.
 * 03/15/04 Andy Cress v1.0 - added strings for use & actions in show_wdt
 * 12/02/04 Andy Cress v1.1 - fixed RPT loop, added more decoding, 
 *                            added flags for HPI_A/HPI_B.
 */
/*M*
Copyright (c) 2004, Intel Corporation
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

  a.. Redistributions of source code must retain the above copyright notice, 
      this list of conditions and the following disclaimer. 
  b.. Redistributions in binary form must reproduce the above copyright notice,
      this list of conditions and the following disclaimer in the documentation 
      and/or other materials provided with the distribution. 
  c.. Neither the name of Intel Corporation nor the names of its contributors 
      may be used to endorse or promote products derived from this software 
      without specific prior written permission. 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *M*/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <getopt.h>
#include "SaHpi.h"

#define  uchar  unsigned char
#ifdef HPI_A
char *progver  = "1.1 HPI-A";
#else
char *progver  = "1.1 HPI-B";
#endif
char fdebug = 0;
#define NUSE  6
char *usedesc[NUSE] = {"reserved", "BIOS FRB2", "BIOS/POST",
                    "OS Load", "SMS/OS", "OEM" };
#define NACT  5
char *actions[NACT] = {"No action", "Hard Reset", "Power down",
		    "Power cycle", "Reserved" };

static void
show_wdt(SaHpiWatchdogNumT  wdnum, SaHpiWatchdogT *wdt)
{
  int icount, pcount;
  char ustr[12]; 
  char astr[16]; 
  char estr[30]; 
  char *pstr;
  icount = wdt->InitialCount /1000;        /*1000 msec = 1 sec*/
  pcount = wdt->PresentCount /1000;

  if (wdt->TimerUse > NUSE) sprintf(ustr,"%d", wdt->TimerUse );
  else strcpy(ustr, usedesc[wdt->TimerUse]);
  if (wdt->TimerAction > NACT) sprintf(astr,"%d", wdt->TimerAction );
  else strcpy(astr, actions[wdt->TimerAction]);
  printf("Watchdog: Num=%d, Log=%d, Running=%d, TimerUse=%s, TimerAction=%s\n",
	wdnum,wdt->Log,wdt->Running,ustr, astr);
  if (wdt->TimerUseExpFlags == 0) strcpy(estr,"none");
  else {
	estr[0] = 0;
	if (wdt->TimerUseExpFlags & 0x01) strcat(estr,"FRB2 ");
	if (wdt->TimerUseExpFlags & 0x02) strcat(estr,"POST ");
	if (wdt->TimerUseExpFlags & 0x04) strcat(estr,"OS_Load ");
	if (wdt->TimerUseExpFlags & 0x08) strcat(estr,"SMS_OS ");
	if (wdt->TimerUseExpFlags & 0x10) strcat(estr,"OEM ");
  }
  printf("          ExpiredUse=%s, Timeout=%d sec, Counter=%d sec\n",
	estr, icount,pcount);
  switch(wdt->PretimerInterrupt) {
  case 1:  pstr = "SMI";    break;
  case 2:  pstr = "NMI";    break;
  case 3:  pstr = "MsgInt"; break;
  default: pstr = "none";   break;
  }
  printf("          PreTimerInterrupt=%s, PreTimeoutInterval=%d msec\n",
	 pstr,wdt->PreTimeoutInterval);
  return;
}  /*end show_wdt*/

int
main(int argc, char **argv)
{
  int c;
  SaErrorT rv;
  SaHpiSessionIdT sessionid;
#ifdef HPI_A
  SaHpiVersionT hpiVer;
  SaHpiRptInfoT rptinfo;
#else
  SaHpiDomainInfoT domainInfo;
#endif
  SaHpiRptEntryT rptentry;
  SaHpiEntryIdT rptentryid;
  SaHpiEntryIdT nextrptentryid;
  SaHpiResourceIdT resourceid;
  SaHpiWatchdogNumT  wdnum;
  SaHpiWatchdogT     wdt;
  int t = 0;
  char freset = 0;
  char fenable = 0;
  char fdisable = 0;

  printf("%s ver %s\n", argv[0],progver);
  while ( (c = getopt( argc, argv,"dert:x?")) != EOF )
     switch(c) {
	case 'r':       /* reset wdt */
		freset = 1;
                break;
	case 'e':       /* disable wdt */
		fenable = 1;
                break;
	case 'd':       /* disable wdt */
		fdisable = 1;
                break;
	case 't':       /* timeout (enable implied) */
		t = atoi(optarg);
		fenable = 1;
                break;
	case 'x': fdebug = 1;     break;  /* debug messages */
	default:
                printf("Usage: %s [-derx -t sec]\n", argv[0]);
                printf(" where -e     enables the watchdog timer\n");
                printf("       -d     disables the watchdog timer\n");
                printf("       -r     resets the watchdog timer\n");
                printf("       -t N   sets timeout to N seconds\n");
                printf("       -x     show eXtra debug messages\n");
		exit(1);
     }
  if (t == 0) t = 120;

#ifdef HPI_A
  rv = saHpiInitialize(&hpiVer);
  if (rv != SA_OK) {
      printf("saHpiInitialize error %d\n",rv);
      exit(-1);
      }
  rv = saHpiSessionOpen(SAHPI_DEFAULT_DOMAIN_ID,&sessionid,NULL);
  if (rv != SA_OK) {
        if (rv == SA_ERR_HPI_ERROR)
           printf("saHpiSessionOpen: error %d, library not running\n",rv);
        else printf("saHpiSessionOpen error %d\n",rv);
	exit(-1);
	}
  rv = saHpiResourcesDiscover(sessionid);
  if (fdebug) printf("saHpiResourcesDiscover rv = %d\n",rv);
  rv = saHpiRptInfoGet(sessionid,&rptinfo);
  if (fdebug) printf("saHpiRptInfoGet rv = %d\n",rv);
  printf("RptInfo: UpdateCount = %x, UpdateTime = %lx\n",
       rptinfo.UpdateCount, (unsigned long)rptinfo.UpdateTimestamp);
#else
  rv = saHpiSessionOpen(SAHPI_UNSPECIFIED_DOMAIN_ID, &sessionid, NULL);
  if (rv != SA_OK) {
        printf("saHpiSessionOpen error %d\n",rv);
	exit(-1);
	}
  rv = saHpiDiscover(sessionid);
  if (fdebug) printf("saHpiDiscover rv = %d\n",rv);
  rv = saHpiDomainInfoGet(sessionid, &domainInfo);
  if (fdebug) printf("saHpiDomainInfoGet rv = %d\n",rv);
  printf("DomainInfo: UpdateCount = %x, UpdateTime = %lx\n",
       domainInfo.RptUpdateCount, (unsigned long)domainInfo.RptUpdateTimestamp);
#endif
 
  /* walk the RPT list */
  rptentryid = SAHPI_FIRST_ENTRY;
  while ((rv == SA_OK) && (rptentryid != SAHPI_LAST_ENTRY))
  {
     rv = saHpiRptEntryGet(sessionid,rptentryid,&nextrptentryid,&rptentry);
     if (rv != SA_OK) printf("RptEntryGet: rv = %d\n",rv);
     if (rv == SA_OK) {
	/* handle WDT for this RPT entry */
	resourceid = rptentry.ResourceId;
#ifdef HPI_A
	rptentry.ResourceTag.Data[rptentry.ResourceTag.DataLength] = 0;
#endif
	if (fdebug)
	   printf("rptentry[%d] resourceid=%d capab=%x tag: %s\n",
		rptentryid, resourceid, rptentry.ResourceCapabilities, 
		rptentry.ResourceTag.Data);

	if (rptentry.ResourceCapabilities & SAHPI_CAPABILITY_WATCHDOG) {
	   printf("%s has watchdog capability\n",rptentry.ResourceTag.Data);

	   wdnum = SAHPI_DEFAULT_WATCHDOG_NUM;
	   rv = saHpiWatchdogTimerGet(sessionid,resourceid,wdnum,&wdt);
	   if (fdebug) printf("saHpiWatchdogTimerGet rv = %d\n",rv);
	   if (rv != 0) {
		printf("saHpiWatchdogTimerGet error = %d\n",rv);
		rv = 0;
		rptentryid = nextrptentryid; 
		continue;
	   }
	   show_wdt(wdnum,&wdt);

	   if (fdisable) {
	      printf("Disabling watchdog timer ...\n");
	      /* clear FRB2, timeout back to 120 sec */
	      /* TODO: add setting wdt values here */
	      wdt.TimerUse = SAHPI_WTU_NONE;    /* 1=FRB2 2=POST 3=OSLoad 4=SMS_OS 5=OEM */
	      wdt.TimerAction = SAHPI_WAE_NO_ACTION; /* 0=none 1=reset 2=powerdown 3=powercycle */
	      wdt.PretimerInterrupt = SAHPI_WPI_NONE; /* 0=none 1=SMI 2=NMI 3=message */
	      wdt.PreTimeoutInterval = 60000; /*msec*/
	      wdt.InitialCount = 120000; /*msec*/
	      wdt.PresentCount = 120000; /*msec*/

	      rv = saHpiWatchdogTimerSet(sessionid,resourceid,wdnum,&wdt);
	      if (fdebug) printf("saHpiWatchdogTimerSet rv = %d\n",rv);
	      if (rv == 0) show_wdt(wdnum,&wdt);
	   } else if (fenable) {
	      printf("Enabling watchdog timer ...\n");
	      /* hard reset action, no pretimeout, clear SMS/OS when done */
	      /* use t for timeout */
	      wdt.TimerUse = SAHPI_WTU_SMS_OS;    /* 1=FRB2 2=POST 3=OSLoad 4=SMS_OS 5=OEM */
	      wdt.TimerAction = SAHPI_WAE_RESET; /* 0=none 1=reset 2=powerdown 3=powercycle */
	      wdt.PretimerInterrupt = SAHPI_WPI_NMI; /* 0=none 1=SMI 2=NMI 3=message */
	      wdt.PreTimeoutInterval = (t / 2) * 1000; /*msec*/
	      wdt.InitialCount = t * 1000; /*msec*/
	      wdt.PresentCount = t * 1000; /*msec*/

	      rv = saHpiWatchdogTimerSet(sessionid,resourceid,wdnum,&wdt);
	      if (fdebug) printf("saHpiWatchdogTimerSet rv = %d\n",rv);
	      if (rv == 0) show_wdt(wdnum,&wdt);
	   }
	   if (freset && !fdisable) {
	      printf("Resetting watchdog timer ...\n");
	      rv = saHpiWatchdogTimerReset(sessionid,resourceid,wdnum);
	      if (fdebug) printf("saHpiWatchdogTimerReset rv = %d\n",rv);
	   }
	} /*watchdog capability*/
	rptentryid = nextrptentryid;  /* get next RPT (usu only one anyway) */
     }  /*endif RPT ok*/
  }  /*end while loop*/
 
  rv = saHpiSessionClose(sessionid);

#ifdef HPI_A
  rv = saHpiFinalize();
#endif
  exit(0);
}
 
/* end hpiwdt.c */