/*********************************************** * ipmidir.h * * Definitions and data structures for direct * user-space IPMI I/Os. * ***********************************************/ /*----------------------------------------------------------------------* The BSD License Copyright (c) 2006, Intel Corporation Copyright (c) 2009 Kontron America, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: a.. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. b.. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. c.. Neither the name of Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *----------------------------------------------------------------------*/ #ifndef IPMIDIR_H_ #define IPMIDIR_H_ #define SMB_DATA_ADDRESS = 0x000 // // State bits based on S1 & S0 below // #define ISA_STATE_MASK 0xC0 #define ISA_IDLE_STATE 0x00 #define ISA_READ_STATE 0x40 #define ISA_WRITE_STATE 0x80 #define ISA_ERROR_STATE 0xC0 // // Status Register Bits // #define ISA_S1_FLAG 0x80 #define ISA_S0_FLAG 0x40 // RESERVED 0x20 // RESERVED 0x10 #define ISA_CD_FLAG 0x08 #define ISA_SMS_MSG_FLAG 0x04 #define ISA_IBF_FLAG 0x02 #define ISA_OBF_FLAG 0x01 // // ISA interface register access defines // #define BMC_SLAVE_ADDR 0x20 #define MAX_ISA_LENGTH 35 #define ISA_SMS_TIMEOUT 5000 // in miliseconds - 1 second #define ISA_SMM_TIMEOUT 100 // in microseconds // // mBMC Address // #define IMB_SEND_ERROR 1 #define IMB_SUCCESS 0 // typedef unsigned int DWORD; // typedef unsigned char BYTE; // typedef unsigned char UCHAR; * defined in imb_api.h * // typedef unsigned long ULONG; * defined in imb_api.h * // typedef unsigned int UINT32; typedef unsigned short UINT16; typedef unsigned char UINT8; struct SMBCharStruct { unsigned int Controller; unsigned int baseAddr; }; /*---------------------------------------------------------* * PCI defines for SMBus *---------------------------------------------------------*/ // PCI related definitions #define PCI_CONFIG_ADDRESS 0xCF8 #define PCI_CONFIG_DATA 0xCFC // PCI unique identifiers #define ID_8111 0x746A1022 #define ID_81801 0x24128086 #define ID_81801AA 0x24138086 #define ID_81801AB 0x24238086 #define ID_82801BA 0x24438086 #define ID_82801CA 0x24838086 #define ID_ICH4 0x24C38086 #define ID_ICH5 0x24D38086 #define ID_ICH6 0x266A8086 //srini added ICH6 support #define ID_CSB5 0x02011166 #define ID_CSB6 0x02031166 #define ID_OSB4 0x02001166 #define Hance_Rapids 0x25A48086 //lester 0627 // PCI configuration registers #define ICH_SMB_BASE 0x20 // base address register #define ICH_HOSTC 0x40 // host config register #define ICH_HOSTC_I2C_EN 0x04 // enable i2c mode #define ICH_HOSTC_SMB_SMI_EN 0x02 // SMI# instead of irq #define ICH_HOSTC_HST_EN 0x01 // enable host cntrlr #define AMD_SMB_BASE_2 0x10 // base address register of SMBus 2.0 #define AMD_SMB_BASE_2_EN 0x04 // SMBus 2.0 space enable #define AMD_SMB_BASE_1 0x58 // base address register of SMBus 1.0 #define AMD_SMB_BASE_1_EN 0x41 // SMBus 1.0 space enable #define AMD_SMBUS_1 0xE0 // SMBus 1.0 registers // I/O registers #define ICH_HST_STA 0x00 // host status #define ICH_HST_STA_BYTE_DONE_STS 0x80 // byte send/rec'd #define ICH_HST_STA_INUSE_STS 0x40 // device access mutex #define ICH_HST_STA_SMBALERT_STS 0x20 // SMBALERT# signal #define ICH_HST_STA_FAILED 0x10 // failed bus transaction #define ICH_HST_STA_BUS_ERR 0x08 // transaction collision #define ICH_HST_STA_DEV_ERR 0x04 // misc. smb device error #define ICH_HST_STA_ALL_ERRS (ICH_HST_STA_FAILED|ICH_HST_STA_BUS_ERR|ICH_HST_STA_DEV_ERR) #define ICH_HST_STA_INTR 0x02 // command completed ok #define ICH_HST_STA_HOST_BUSY 0x01 // command is running #define ICH_HST_CNT 0x02 // host control #define ICH_HST_CNT_START 0x40 // start command #define ICH_HST_CNT_LAST_BYTE 0x20 // indicate last byte #define ICH_HST_CNT_SMB_CMD_QUICK 0x00 // command: quick #define ICH_HST_CNT_SMB_CMD_BYTE 0x04 // command: byte #define ICH_HST_CNT_SMB_CMD_BYTE_DATA 0x08 // command: byte data #define ICH_HST_CNT_SMB_CMD_WORD_DATA 0x0c // command: word data #define ICH_HST_CNT_SMB_CMD_PROC_CALL 0x10 // command: process call #define ICH_HST_CNT_SMB_CMD_BLOCK 0x14 // command: block #define ICH_HST_CNT_SMB_CMD_I2C_READ 0x18 // command: i2c read #define ICH_HST_CNT_KILL 0x02 // kill current transaction #define ICH_HST_CNT_INTREN 0x01 // enable interrupt #define ICH_HST_CMD 0x03 // host command #define ICH_XMIT_SLVA 0x04 // transmit slave address #define ICH_XMIT_SLVA_READ 0x01 // direction: read #define ICH_XMIT_SLVA_WRITE 0x00 // direction: write #define ICH_D0 0x05 // host data 0 #define ICH_D1 0x06 // host data 1 #define ICH_BLOCK_DB 0x07 // block data byte // SMBus 1.0 #define AMD_SMB_1_STATUS 0x00 // SMBus global status #define AMD_SMB_1_STATUS_SMBS_BSY (1<11) #define AMD_SMB_1_STATUS_SMBA_STS (1<10) #define AMD_SMB_1_STATUS_HSLV_STS (1<9) #define AMD_SMB_1_STATUS_SNP_STS (1<8) #define AMD_SMB_1_STATUS_TO_STS (1<5) #define AMD_SMB_1_STATUS_HCYC_STS (1<4) #define AMD_SMB_1_STATUS_HST_BSY (1<3) #define AMD_SMB_1_STATUS_PERR_STS (1<2) #define AMD_SMB_1_STATUS_COL_STS (1<1) #define AMD_SMB_1_STATUS_ABRT_STS (1<0) #define AMD_SMB_1_STATUS_ALL_ERRS AMD_SMB_1_STATUS_TO_STS|AMD_SMB_1_STATUS_HST_BSY|AMD_SMB_1_STATUS_PERR_STS|AMD_SMB_1_STATUS_COL_STS #define AMD_SMB_1_CTL 0x02 // SMBus global control #define AMD_SMB_1_CTL_SMBA_EN (1<<10) #define AMD_SMB_1_CTL_HSLV_EN (1<<9) #define AMD_SMB_1_CTL_SNP_EN (1<<8) #define AMD_SMB_1_CTL_ABORT (1<<5) #define AMD_SMB_HCYC_EN (1<<4) #define AMD_SMB_HOSTSTS (1<<3) #define AMD_SMB_CYCTYPE_QC 0x0 // quick command #define AMD_SMB_CYCTYPE_RSB 0x1 // receive/send byte #define AMD_SMB_CYCTYPE_RWB 0x2 // read/write byte #define AMD_SMB_CYCTYPE_RWW 0x3 // read/write word #define AMD_SMB_CYCTYPE_PC 0x4 // process call #define AMD_SMB_CYCTYPE_RWBL 0x5 // read/write block #define AMD_SMB_1_ADDR 0x04 // SMBus host address #define AMD_SMB_1_ADDR_READCYC (1<<0) #define AMD_SMB_1_DATA 0x06 // SMBus host data #define AMD_SMB_1_CMD 0x08 // SMBus host command #define AMD_SMB_1_BLOCK_DATA 0x09 // SMBus block data FIFO access port // For SMBus 2.0, see ACPI 2.0 chapter 13 PCI interface definitions #define AMD_SMB_BLOCK_WRITE 0xa #define AMD_SMB_BLOCK_READ 0xb // AMD PCI control registers definitions. #define AMD_PCI_MISC 0x48 #define AMD_PCI_MISC_SCI 0x04 #define AMD_PCI_MISC_INT 0x02 #define AMD_PCI_MISC_SPEEDUP 0x01 // SMBus Controllers #define INTEL_SMBC 1 // Intel #define SW_SMBC 2 // ServerWorks #define VIA_SMBC 3 // VIA #define AMD_SMBC 4 // AMD /************************************************ * bmc.h ************************************************/ #define STATUS_OK 0 #define BMC_MAX_RETRIES 3 // Max number of retries if BMC is busy #define DATA_BUF_SIZE 255 // Max data buffer, see IPMI_REQBUF_SIZE #define GETMSGTIMEOUT 5 // Time out in sec for send/get message command // Product IDs of systems with PC87431 chips (have both Sahalee and mBMC) #define ID_PC87431_M 0x4311 #define ID_PC87431_S 0x4312 #define ID_PC87431_C 0x4315 // Available BMC chips that are supported by this library. #define BMC_UNKNOWN 0 #define BMC_SAHALEE 1 // Intel Sahalee BMC #define BMC_MBMC_87431M 2 // mBMC, chip = PC87431M #define BMC_MBMC_87431S 3 // mBMC, chip = PC87431S #define BMC_MBMC_87431C 4 // mBMC, chip = PC87431C #define BMC_BOTH_SAHALEE_MBMC 5 #define BMC_DUAL_NW 6 // currently not detected // #define BMC_AMT10 7 // Available IPMI versions. There may be full and partial IPMI implementations. // To figure out what implementation is supported, look at the BMC_TYPE. #define IPMI_VERSION_UNKNOWN 0 #define IPMI_VERSION_1_5 1 #define IPMI_VERSION_2_0 2 #define IPMI_VERSION_1_0 3 //***************************************************************************** // Message struct for sending and receiving messages from the BMC. Requests // must have a DevAdd, NetFn, LUN, Cmd, Data, and Len. The response will have // all fields filled in. In both cases 'Len' is the length of the data buffer. typedef struct { UINT8 Bus; UINT8 DevAdd; UINT8 NetFn; UINT8 LUN; UINT8 Cmd; UINT8 Data[DATA_BUF_SIZE]; UINT32 Len; UINT8 CompCode; } BMC_MESSAGE; /* Internal error codes from BMC or IPMI driver: * ERR_NO_DRV is defined in ipmicmd.h, and the other * values below are not used. */ #define ER_NO_BMC_IF -400 // could not find the BMC interface #define ERCANTLOCATEIPMIHANDLE -500 // Unable to locate IPMI handle #define ERCANTALLOCMEMORYFORIPMI -501 // Unable to allocate memory for IPMI services #define ERCANTLOADIPMIDRIVER -502 // Unable to dynamically load IPMI driver #define ERSENDINGIPMIMESSAGE -503 // Error sending request to BMC #define ERGETTINGIPMIMESSAGE -504 // Error getting request from BMC #define ERCMDRETURNEDDONTMATCH -505 // Returned command # doesn't match what was sent #define ERLUNRETURNEDDONTMATCH -506 // Returned LUN # doesn't match what was sent #define ERCOMPCODEERR -507 // Comp code is not COMPCODE_NORMAL #define ERSEQNUMBER -508 // Sequence number error. #define ERCANTCLEARMSGFLAGS -509 // Can not clear message flags #define ERINVALIDRESPONSELEN -510 // Response length not as expected. #define ER_NO_PCI_BIOS -511 // No PCI BIOS record exist #define ER_SMBUSBUSERROR -512 #define ER_SMBUSTIMEOUT -513 #define ER_SMBUSOWNERSHIP -514 #define ER_SMBUSDEVERROR -515 #define ER_NOTKCS -516 // Not KCS, probably SMBus // Device Addresses #define BMC_ADDR 0x20 // Baseboard Management Controller #define HSC0_ADDR 0xC0 // Hot Swap Controller 0 #define HSC1_ADDR 0xC2 // Hot Swap Controller 1 #define PSC_ADDR 0xC8 // Power Supply Controller #define CBC_ADDR 0x28 // Chassis Bridge Controller #define LCP_ADDR 0x22 // LCP(Local Control Panel) Address #define MBMC_ADDR 0x84 // MINI BMC address #define SMBUS_SLAVE_ADDRESS 0x00 #define ID_VITESSE 0x01 // for HSC #define ID_GEM 0x02 // for HSC #define ISA_BUS 0xFF // ISA Bus address #define BMC_DEV_ADDR 0x20 // BMC Device Addr for Get Device ID // #define BMC_LUN 0x00 // BMC commands & event request messages #define OEM_LUN1 0x01 // OEM LUN 1 #define SMS_MSG_LUN 0x02 // SMS message LUN #define OEM_LUN2 0x03 // OEM LUN 2 #define NETFN_APP 0x06 #define GETMESSAGE_CMD 0x33 // IPMI Get Message command #define SENDMESSAGE_CMD 0x34 // IPMI Send Message command #endif // IPMIDIR_H_