Imported Upstream version 0.9.6+really0.9.3upstream/0.9.6+really0.9.3

1 files changed, 61 insertions, 317 deletions

diff --git a/tests/init.sh b/tests/init.sh
index d3662061..512e8763 100644
--- a/tests/init.sh
+++ b/tests/init.sh
@@ -1,6 +1,6 @@
 # source this file; set up for tests
 
-# Copyright (C) 2009-2015 Free Software Foundation, Inc.
+# Copyright (C) 2009, 2010 Free Software Foundation, Inc.
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -21,16 +21,11 @@
 # The typical skeleton of a test looks like this:
 #
 #   #!/bin/sh
-#   . "${srcdir=.}/init.sh"; path_prepend_ .
+#   : ${srcdir=.}
+#   . "$srcdir/init.sh"; path_prepend_ .
 #   Execute some commands.
 #   Note that these commands are executed in a subdirectory, therefore you
 #   need to prepend "../" to relative filenames in the build directory.
-#   Note that the "path_prepend_ ." is useful only if the body of your
-#   test invokes programs residing in the initial directory.
-#   For example, if the programs you want to test are in src/, and this test
-#   script is named tests/test-1, then you would use "path_prepend_ ../src",
-#   or perhaps export PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH"
-#   to all tests via automake's TESTS_ENVIRONMENT.
 #   Set the exit code 0 for success, 77 for skipped, or 1 or other for failure.
 #   Use the skip_ and fail_ functions to print a diagnostic and then exit
 #   with the corresponding exit code.
@@ -57,307 +52,82 @@
 #   4. Finally
 #   $ exit
 
-ME_=`expr "./$0" : '.*/\(.*\)$'`
-
-# We use a trap below for cleanup.  This requires us to go through
-# hoops to get the right exit status transported through the handler.
-# So use 'Exit STATUS' instead of 'exit STATUS' inside of the tests.
-# Turn off errexit here so that we don't trip the bug with OSF1/Tru64
-# sh inside this function.
-Exit () { set +e; (exit $1); exit $1; }
-
-# Print warnings (e.g., about skipped and failed tests) to this file number.
-# Override by defining to say, 9, in init.cfg, and putting say,
-#   export ...ENVVAR_SETTINGS...; $(SHELL) 9>&2
-# in the definition of TESTS_ENVIRONMENT in your tests/Makefile.am file.
-# This is useful when using automake's parallel tests mode, to print
-# the reason for skip/failure to console, rather than to the .log files.
-: ${stderr_fileno_=2}
-
-# Note that correct expansion of "$*" depends on IFS starting with ' '.
-# Always write the full diagnostic to stderr.
-# When stderr_fileno_ is not 2, also emit the first line of the
-# diagnostic to that file descriptor.
-warn_ ()
-{
-  # If IFS does not start with ' ', set it and emit the warning in a subshell.
-  case $IFS in
-    ' '*) printf '%s\n' "$*" >&2
-          test $stderr_fileno_ = 2 \
-            || { printf '%s\n' "$*" | sed 1q >&$stderr_fileno_ ; } ;;
-    *) (IFS=' '; warn_ "$@");;
-  esac
-}
-fail_ () { warn_ "$ME_: failed test: $@"; Exit 1; }
-skip_ () { warn_ "$ME_: skipped test: $@"; Exit 77; }
-fatal_ () { warn_ "$ME_: hard error: $@"; Exit 99; }
-framework_failure_ () { warn_ "$ME_: set-up failure: $@"; Exit 99; }
-
-# This is used to simplify checking of the return value
-# which is useful when ensuring a command fails as desired.
-# I.e., just doing `command ... &&fail=1` will not catch
-# a segfault in command for example.  With this helper you
-# instead check an explicit exit code like
-#   returns_ 1 command ... || fail
-returns_ () {
-  # Disable tracing so it doesn't interfere with stderr of the wrapped command
-  { set +x; } 2>/dev/null
-
-  local exp_exit="$1"
-  shift
-  "$@"
-  test $? -eq $exp_exit && ret_=0 || ret_=1
-
-  if test "$VERBOSE" = yes && test "$gl_set_x_corrupts_stderr_" = false; then
-    set -x
-  fi
-  { return $ret_; } 2>/dev/null
-}
-
-# Sanitize this shell to POSIX mode, if possible.
-DUALCASE=1; export DUALCASE
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-    *posix*) set -o posix ;;
-  esac
-fi
-
 # We require $(...) support unconditionally.
 # We require a few additional shell features only when $EXEEXT is nonempty,
 # in order to support automatic $EXEEXT emulation:
 # - hyphen-containing alias names
 # - we prefer to use ${var#...} substitution, rather than having
 #   to work around lack of support for that feature.
-# The following code attempts to find a shell with support for these features.
-# If the current shell passes the test, we're done.  Otherwise, test other
-# shells until we find one that passes.  If one is found, re-exec it.
-# If no acceptable shell is found, skip the current test.
-#
-# The "...set -x; P=1 true 2>err..." test is to disqualify any shell that
-# emits "P=1" into err, as /bin/sh from SunOS 5.11 and OpenBSD 4.7 do.
-#
-# Use "9" to indicate success (rather than 0), in case some shell acts
-# like Solaris 10's /bin/sh but exits successfully instead of with status 2.
+# The following code attempts to find a shell with support for these features
+# and re-exec's it.  If not, it skips the current test.
 
-# Eval this code in a subshell to determine a shell's suitability.
-# 10 - passes all tests; ok to use
-#  9 - ok, but enabling "set -x" corrupts app stderr; prefer higher score
-#  ? - not ok
 gl_shell_test_script_='
 test $(echo y) = y || exit 1
-f_local_() { local v=1; }; f_local_ || exit 1
-score_=10
-if test "$VERBOSE" = yes; then
-  test -n "$( (exec 3>&1; set -x; P=1 true 2>&3) 2> /dev/null)" && score_=9
-fi
-test -z "$EXEEXT" && exit $score_
+test -z "$EXEEXT" && exit 0
 shopt -s expand_aliases
 alias a-b="echo zoo"
 v=abx
      test ${v%x} = ab \
   && test ${v#a} = bx \
-  && test $(a-b) = zoo \
-  && exit $score_
+  && test $(a-b) = zoo
 '
 
 if test "x$1" = "x--no-reexec"; then
   shift
 else
-  # Assume a working shell.  Export to subshells (setup_ needs this).
-  gl_set_x_corrupts_stderr_=false
-  export gl_set_x_corrupts_stderr_
-
-  # Record the first marginally acceptable shell.
-  marginal_=
-
-  # Search for a shell that meets our requirements.
-  for re_shell_ in __current__ "${CONFIG_SHELL:-no_shell}" \
-      /bin/sh bash dash zsh pdksh fail
+  for re_shell_ in "${CONFIG_SHELL:-no_shell}" /bin/sh bash dash zsh pdksh fail
   do
     test "$re_shell_" = no_shell && continue
-
-    # If we've made it all the way to the sentinel, "fail" without
-    # finding even a marginal shell, skip this test.
-    if test "$re_shell_" = fail; then
-      test -z "$marginal_" && skip_ failed to find an adequate shell
-      re_shell_=$marginal_
-      break
-    fi
-
-    # When testing the current shell, simply "eval" the test code.
-    # Otherwise, run it via $re_shell_ -c ...
-    if test "$re_shell_" = __current__; then
-      # 'eval'ing this code makes Solaris 10's /bin/sh exit with
-      # $? set to 2.  It does not evaluate any of the code after the
-      # "unexpected" first '('.  Thus, we must run it in a subshell.
-      ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1
-    else
-      "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null
-    fi
-
-    st_=$?
-
-    # $re_shell_ works just fine.  Use it.
-    if test $st_ = 10; then
-      gl_set_x_corrupts_stderr_=false
-      break
-    fi
-
-    # If this is our first marginally acceptable shell, remember it.
-    if test "$st_:$marginal_" = 9: ; then
-      marginal_="$re_shell_"
-      gl_set_x_corrupts_stderr_=true
+    test "$re_shell_" = fail && skip_ failed to find an adequate shell
+    if "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null; then
+      exec "$re_shell_" "$0" --no-reexec "$@"
+      echo "$ME_: exec failed" 1>&2
+      exit 127
     fi
   done
-
-  if test "$re_shell_" != __current__; then
-    # Found a usable shell.  Preserve -v and -x.
-    case $- in
-      *v*x* | *x*v*) opts_=-vx ;;
-      *v*) opts_=-v ;;
-      *x*) opts_=-x ;;
-      *) opts_= ;;
-    esac
-    re_shell=$re_shell_
-    export re_shell
-    exec "$re_shell_" $opts_ "$0" --no-reexec "$@"
-    echo "$ME_: exec failed" 1>&2
-    exit 127
-  fi
 fi
 
-# If this is bash, turn off all aliases.
-test -n "$BASH_VERSION" && unalias -a
-
-# Note that when supporting $EXEEXT (transparently mapping from PROG_NAME to
-# PROG_NAME.exe), we want to support hyphen-containing names like test-acos.
-# That is part of the shell-selection test above.  Why use aliases rather
-# than functions?  Because support for hyphen-containing aliases is more
-# widespread than that for hyphen-containing function names.
 test -n "$EXEEXT" && shopt -s expand_aliases
 
-# Enable glibc's malloc-perturbing option.
-# This is useful for exposing code that depends on the fact that
-# malloc-related functions often return memory that is mostly zeroed.
-# If you have the time and cycles, use valgrind to do an even better job.
-: ${MALLOC_PERTURB_=87}
-export MALLOC_PERTURB_
+# We use a trap below for cleanup.  This requires us to go through
+# hoops to get the right exit status transported through the handler.
+# So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
+# Turn off errexit here so that we don't trip the bug with OSF1/Tru64
+# sh inside this function.
+Exit () { set +e; (exit $1); exit $1; }
+
+# Print warnings (e.g., about skipped and failed tests) to this file number.
+# Override by defining to say, 9, in init.cfg, and putting say,
+# "export ...ENVVAR_SETTINGS...; exec 9>&2; $(SHELL)" in the definition
+# of TESTS_ENVIRONMENT in your tests/Makefile.am file.
+# This is useful when using automake's parallel tests mode, to print
+# the reason for skip/failure to console, rather than to the .log files.
+: ${stderr_fileno_=2}
+
+warn_() { echo "$@" 1>&$stderr_fileno_; }
+fail_() { warn_ "$ME_: failed test: $@"; Exit 1; }
+skip_() { warn_ "$ME_: skipped test: $@"; Exit 77; }
+framework_failure_() { warn_ "$ME_: set-up failure: $@"; Exit 1; }
 
 # This is a stub function that is run upon trap (upon regular exit and
 # interrupt).  Override it with a per-test function, e.g., to unmount
 # a partition, or to undo any other global state changes.
-cleanup_ () { :; }
-
-# Emit a header similar to that from diff -u;  Print the simulated "diff"
-# command so that the order of arguments is clear.  Don't bother with @@ lines.
-emit_diff_u_header_ ()
-{
-  printf '%s\n' "diff -u $*" \
-    "--- $1	1970-01-01" \
-    "+++ $2	1970-01-01"
-}
-
-# Arrange not to let diff or cmp operate on /dev/null,
-# since on some systems (at least OSF/1 5.1), that doesn't work.
-# When there are not two arguments, or no argument is /dev/null, return 2.
-# When one argument is /dev/null and the other is not empty,
-# cat the nonempty file to stderr and return 1.
-# Otherwise, return 0.
-compare_dev_null_ ()
-{
-  test $# = 2 || return 2
-
-  if test "x$1" = x/dev/null; then
-    test -s "$2" || return 0
-    emit_diff_u_header_ "$@"; sed 's/^/+/' "$2"
-    return 1
-  fi
-
-  if test "x$2" = x/dev/null; then
-    test -s "$1" || return 0
-    emit_diff_u_header_ "$@"; sed 's/^/-/' "$1"
-    return 1
-  fi
-
-  return 2
-}
+cleanup_() { :; }
 
-if diff_out_=`exec 2>/dev/null; diff -u "$0" "$0" < /dev/null` \
-   && diff -u Makefile "$0" 2>/dev/null | grep '^[+]#!' >/dev/null; then
-  # diff accepts the -u option and does not (like AIX 7 'diff') produce an
-  # extra space on column 1 of every content line.
-  if test -z "$diff_out_"; then
-    compare_ () { diff -u "$@"; }
-  else
-    compare_ ()
-    {
-      if diff -u "$@" > diff.out; then
-        # No differences were found, but Solaris 'diff' produces output
-        # "No differences encountered". Hide this output.
-        rm -f diff.out
-        true
-      else
-        cat diff.out
-        rm -f diff.out
-        false
-      fi
-    }
-  fi
-elif diff_out_=`exec 2>/dev/null; diff -c "$0" "$0" < /dev/null`; then
-  if test -z "$diff_out_"; then
-    compare_ () { diff -c "$@"; }
-  else
-    compare_ ()
-    {
-      if diff -c "$@" > diff.out; then
-        # No differences were found, but AIX and HP-UX 'diff' produce output
-        # "No differences encountered" or "There are no differences between the
-        # files.". Hide this output.
-        rm -f diff.out
-        true
-      else
-        cat diff.out
-        rm -f diff.out
-        false
-      fi
-    }
-  fi
-elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
-  compare_ () { cmp -s "$@"; }
+if ( diff --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then
+  compare() { diff -u "$@"; }
+elif ( cmp --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then
+  compare() { cmp -s "$@"; }
 else
-  compare_ () { cmp "$@"; }
+  compare() { cmp "$@"; }
 fi
 
-# Usage: compare EXPECTED ACTUAL
-#
-# Given compare_dev_null_'s preprocessing, defer to compare_ if 2 or more.
-# Otherwise, propagate $? to caller: any diffs have already been printed.
-compare ()
-{
-  # This looks like it can be factored to use a simple "case $?"
-  # after unchecked compare_dev_null_ invocation, but that would
-  # fail in a "set -e" environment.
-  if compare_dev_null_ "$@"; then
-    return 0
-  else
-    case $? in
-      1) return 1;;
-      *) compare_ "$@";;
-    esac
-  fi
-}
-
 # An arbitrary prefix to help distinguish test directories.
-testdir_prefix_ () { printf gt; }
+testdir_prefix_() { printf gt; }
 
 # Run the user-overridable cleanup_ function, remove the temporary
 # directory and exit with the incoming value of $?.
-remove_tmp_ ()
+remove_tmp_()
 {
   __st=$?
   cleanup_
@@ -373,21 +143,13 @@ remove_tmp_ ()
 # contains only the specified bytes (see the case stmt below), then print
 # a space-separated list of those names and return 0.  Otherwise, don't
 # print anything and return 1.  Naming constraints apply also to DIR.
-find_exe_basenames_ ()
+find_exe_basenames_()
 {
   feb_dir_=$1
   feb_fail_=0
   feb_result_=
   feb_sp_=
   for feb_file_ in $feb_dir_/*.exe; do
-    # If there was no *.exe file, or there existed a file named "*.exe" that
-    # was deleted between the above glob expansion and the existence test
-    # below, just skip it.
-    test "x$feb_file_" = "x$feb_dir_/*.exe" && test ! -f "$feb_file_" \
-      && continue
-    # Exempt [.exe, since we can't create a function by that name, yet
-    # we can't invoke [ by PATH search anyways due to shell builtins.
-    test "x$feb_file_" = "x$feb_dir_/[.exe" && continue
     case $feb_file_ in
       *[!-a-zA-Z/0-9_.+]*) feb_fail_=1; break;;
       *) # Remove leading file name components as well as the .exe suffix.
@@ -405,8 +167,8 @@ find_exe_basenames_ ()
 # For each file name of the form PROG.exe, create an alias named
 # PROG that simply invokes PROG.exe, then return 0.  If any selected
 # file name or the directory name, $1, contains an unexpected character,
-# define no alias and return 1.
-create_exe_shims_ ()
+# define no function and return 1.
+create_exe_shims_()
 {
   case $EXEEXT in
     '') return 0 ;;
@@ -415,7 +177,7 @@ create_exe_shims_ ()
   esac
 
   base_names_=`find_exe_basenames_ $1` \
-    || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 0; }
+    || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 1; }
 
   if test -n "$base_names_"; then
     for base_ in $base_names_; do
@@ -428,14 +190,15 @@ create_exe_shims_ ()
 
 # Use this function to prepend to PATH an absolute name for each
 # specified, possibly-$initial_cwd_-relative, directory.
-path_prepend_ ()
+path_prepend_()
 {
   while test $# != 0; do
     path_dir_=$1
     case $path_dir_ in
       '') fail_ "invalid path dir: '$1'";;
       /*) abs_path_dir_=$path_dir_;;
-      *) abs_path_dir_=$initial_cwd_/$path_dir_;;
+      *) abs_path_dir_=`cd "$initial_cwd_/$path_dir_" && echo "$PWD"` \
+           || fail_ "invalid path dir: $path_dir_";;
     esac
     case $abs_path_dir_ in
       *:*) fail_ "invalid path dir: '$abs_path_dir_'";;
@@ -450,38 +213,21 @@ path_prepend_ ()
   export PATH
 }
 
-setup_ ()
+setup_()
 {
-  if test "$VERBOSE" = yes; then
-    # Test whether set -x may cause the selected shell to corrupt an
-    # application's stderr.  Many do, including zsh-4.3.10 and the /bin/sh
-    # from SunOS 5.11, OpenBSD 4.7 and Irix 5.x and 6.5.
-    # If enabling verbose output this way would cause trouble, simply
-    # issue a warning and refrain.
-    if $gl_set_x_corrupts_stderr_; then
-      warn_ "using SHELL=$SHELL with 'set -x' corrupts stderr"
-    else
-      set -x
-    fi
-  fi
+  test "$VERBOSE" = yes && set -x
 
   initial_cwd_=$PWD
-  fail=0
+  ME_=`expr "./$0" : '.*/\(.*\)$'`
 
   pfx_=`testdir_prefix_`
   test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
     || fail_ "failed to create temporary directory in $initial_cwd_"
-  cd "$test_dir_" || fail_ "failed to cd to temporary directory"
-
-  # As autoconf-generated configure scripts do, ensure that IFS
-  # is defined initially, so that saving and restoring $IFS works.
-  gl_init_sh_nl_='
-'
-  IFS=" ""	$gl_init_sh_nl_"
+  cd "$test_dir_"
 
-  # This trap statement, along with a trap on 0 below, ensure that the
-  # temporary directory, $test_dir_, is removed upon exit as well as
-  # upon receipt of any of the listed signals.
+  # These trap statements ensure that the temporary directory, $test_dir_,
+  # is removed upon exit as well as upon receipt of any of the listed signals.
+  trap remove_tmp_ 0
   for sig_ in 1 2 3 13 15; do
     eval "trap 'Exit $(expr $sig_ + 128)' $sig_"
   done
@@ -503,7 +249,7 @@ setup_ ()
 #  - make only $MAX_TRIES_ attempts
 
 # Helper function.  Print $N pseudo-random bytes from a-zA-Z0-9.
-rand_bytes_ ()
+rand_bytes_()
 {
   n_=$1
 
@@ -535,11 +281,11 @@ rand_bytes_ ()
     | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
 }
 
-mktempd_ ()
+mktempd_()
 {
   case $# in
   2);;
-  *) fail_ "Usage: mktempd_ DIR TEMPLATE";;
+  *) fail_ "Usage: $ME DIR TEMPLATE";;
   esac
 
   destdir_=$1
@@ -556,12 +302,13 @@ mktempd_ ()
 
   case $template_ in
   *XXXX) ;;
-  *) fail_ \
-       "invalid template: $template_ (must have a suffix of at least 4 X's)";;
+  *) fail_ "invalid template: $template_ (must have a suffix of at least 4 X's)";;
   esac
 
+  fail=0
+
   # First, try to use mktemp.
-  d=`unset TMPDIR; { mktemp -d -t -p "$destdir_" "$template_"; } 2>/dev/null` \
+  d=`unset TMPDIR; mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \
     || fail=1
 
   # The resulting name must be in the specified directory.
@@ -608,6 +355,3 @@ test -f "$srcdir/init.cfg" \
   && . "$srcdir/init.cfg"
 
 setup_ "$@"
-# This trap is here, rather than in the setup_ function, because some
-# shells run the exit trap at shell function exit, rather than script exit.
-trap remove_tmp_ 0