diff options
Diffstat (limited to 'tests/init.sh')
| -rw-r--r-- | tests/init.sh | 378 |
1 files changed, 317 insertions, 61 deletions
diff --git a/tests/init.sh b/tests/init.sh index 512e8763..d3662061 100644 --- a/tests/init.sh +++ b/tests/init.sh @@ -1,6 +1,6 @@ # source this file; set up for tests -# Copyright (C) 2009, 2010 Free Software Foundation, Inc. +# Copyright (C) 2009-2015 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -21,11 +21,16 @@ # The typical skeleton of a test looks like this: # # #!/bin/sh -# : ${srcdir=.} -# . "$srcdir/init.sh"; path_prepend_ . +# . "${srcdir=.}/init.sh"; path_prepend_ . # Execute some commands. # Note that these commands are executed in a subdirectory, therefore you # need to prepend "../" to relative filenames in the build directory. +# Note that the "path_prepend_ ." is useful only if the body of your +# test invokes programs residing in the initial directory. +# For example, if the programs you want to test are in src/, and this test +# script is named tests/test-1, then you would use "path_prepend_ ../src", +# or perhaps export PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH" +# to all tests via automake's TESTS_ENVIRONMENT. # Set the exit code 0 for success, 77 for skipped, or 1 or other for failure. # Use the skip_ and fail_ functions to print a diagnostic and then exit # with the corresponding exit code. @@ -52,82 +57,307 @@ # 4. Finally # $ exit +ME_=`expr "./$0" : '.*/\(.*\)$'` + +# We use a trap below for cleanup. This requires us to go through +# hoops to get the right exit status transported through the handler. +# So use 'Exit STATUS' instead of 'exit STATUS' inside of the tests. +# Turn off errexit here so that we don't trip the bug with OSF1/Tru64 +# sh inside this function. +Exit () { set +e; (exit $1); exit $1; } + +# Print warnings (e.g., about skipped and failed tests) to this file number. +# Override by defining to say, 9, in init.cfg, and putting say, +# export ...ENVVAR_SETTINGS...; $(SHELL) 9>&2 +# in the definition of TESTS_ENVIRONMENT in your tests/Makefile.am file. +# This is useful when using automake's parallel tests mode, to print +# the reason for skip/failure to console, rather than to the .log files. +: ${stderr_fileno_=2} + +# Note that correct expansion of "$*" depends on IFS starting with ' '. +# Always write the full diagnostic to stderr. +# When stderr_fileno_ is not 2, also emit the first line of the +# diagnostic to that file descriptor. +warn_ () +{ + # If IFS does not start with ' ', set it and emit the warning in a subshell. + case $IFS in + ' '*) printf '%s\n' "$*" >&2 + test $stderr_fileno_ = 2 \ + || { printf '%s\n' "$*" | sed 1q >&$stderr_fileno_ ; } ;; + *) (IFS=' '; warn_ "$@");; + esac +} +fail_ () { warn_ "$ME_: failed test: $@"; Exit 1; } +skip_ () { warn_ "$ME_: skipped test: $@"; Exit 77; } +fatal_ () { warn_ "$ME_: hard error: $@"; Exit 99; } +framework_failure_ () { warn_ "$ME_: set-up failure: $@"; Exit 99; } + +# This is used to simplify checking of the return value +# which is useful when ensuring a command fails as desired. +# I.e., just doing `command ... &&fail=1` will not catch +# a segfault in command for example. With this helper you +# instead check an explicit exit code like +# returns_ 1 command ... || fail +returns_ () { + # Disable tracing so it doesn't interfere with stderr of the wrapped command + { set +x; } 2>/dev/null + + local exp_exit="$1" + shift + "$@" + test $? -eq $exp_exit && ret_=0 || ret_=1 + + if test "$VERBOSE" = yes && test "$gl_set_x_corrupts_stderr_" = false; then + set -x + fi + { return $ret_; } 2>/dev/null +} + +# Sanitize this shell to POSIX mode, if possible. +DUALCASE=1; export DUALCASE +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; + esac +fi + # We require $(...) support unconditionally. # We require a few additional shell features only when $EXEEXT is nonempty, # in order to support automatic $EXEEXT emulation: # - hyphen-containing alias names # - we prefer to use ${var#...} substitution, rather than having # to work around lack of support for that feature. -# The following code attempts to find a shell with support for these features -# and re-exec's it. If not, it skips the current test. +# The following code attempts to find a shell with support for these features. +# If the current shell passes the test, we're done. Otherwise, test other +# shells until we find one that passes. If one is found, re-exec it. +# If no acceptable shell is found, skip the current test. +# +# The "...set -x; P=1 true 2>err..." test is to disqualify any shell that +# emits "P=1" into err, as /bin/sh from SunOS 5.11 and OpenBSD 4.7 do. +# +# Use "9" to indicate success (rather than 0), in case some shell acts +# like Solaris 10's /bin/sh but exits successfully instead of with status 2. +# Eval this code in a subshell to determine a shell's suitability. +# 10 - passes all tests; ok to use +# 9 - ok, but enabling "set -x" corrupts app stderr; prefer higher score +# ? - not ok gl_shell_test_script_=' test $(echo y) = y || exit 1 -test -z "$EXEEXT" && exit 0 +f_local_() { local v=1; }; f_local_ || exit 1 +score_=10 +if test "$VERBOSE" = yes; then + test -n "$( (exec 3>&1; set -x; P=1 true 2>&3) 2> /dev/null)" && score_=9 +fi +test -z "$EXEEXT" && exit $score_ shopt -s expand_aliases alias a-b="echo zoo" v=abx test ${v%x} = ab \ && test ${v#a} = bx \ - && test $(a-b) = zoo + && test $(a-b) = zoo \ + && exit $score_ ' if test "x$1" = "x--no-reexec"; then shift else - for re_shell_ in "${CONFIG_SHELL:-no_shell}" /bin/sh bash dash zsh pdksh fail + # Assume a working shell. Export to subshells (setup_ needs this). + gl_set_x_corrupts_stderr_=false + export gl_set_x_corrupts_stderr_ + + # Record the first marginally acceptable shell. + marginal_= + + # Search for a shell that meets our requirements. + for re_shell_ in __current__ "${CONFIG_SHELL:-no_shell}" \ + /bin/sh bash dash zsh pdksh fail do test "$re_shell_" = no_shell && continue - test "$re_shell_" = fail && skip_ failed to find an adequate shell - if "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null; then - exec "$re_shell_" "$0" --no-reexec "$@" - echo "$ME_: exec failed" 1>&2 - exit 127 + + # If we've made it all the way to the sentinel, "fail" without + # finding even a marginal shell, skip this test. + if test "$re_shell_" = fail; then + test -z "$marginal_" && skip_ failed to find an adequate shell + re_shell_=$marginal_ + break + fi + + # When testing the current shell, simply "eval" the test code. + # Otherwise, run it via $re_shell_ -c ... + if test "$re_shell_" = __current__; then + # 'eval'ing this code makes Solaris 10's /bin/sh exit with + # $? set to 2. It does not evaluate any of the code after the + # "unexpected" first '('. Thus, we must run it in a subshell. + ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1 + else + "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null + fi + + st_=$? + + # $re_shell_ works just fine. Use it. + if test $st_ = 10; then + gl_set_x_corrupts_stderr_=false + break + fi + + # If this is our first marginally acceptable shell, remember it. + if test "$st_:$marginal_" = 9: ; then + marginal_="$re_shell_" + gl_set_x_corrupts_stderr_=true fi done -fi -test -n "$EXEEXT" && shopt -s expand_aliases + if test "$re_shell_" != __current__; then + # Found a usable shell. Preserve -v and -x. + case $- in + *v*x* | *x*v*) opts_=-vx ;; + *v*) opts_=-v ;; + *x*) opts_=-x ;; + *) opts_= ;; + esac + re_shell=$re_shell_ + export re_shell + exec "$re_shell_" $opts_ "$0" --no-reexec "$@" + echo "$ME_: exec failed" 1>&2 + exit 127 + fi +fi -# We use a trap below for cleanup. This requires us to go through -# hoops to get the right exit status transported through the handler. -# So use `Exit STATUS' instead of `exit STATUS' inside of the tests. -# Turn off errexit here so that we don't trip the bug with OSF1/Tru64 -# sh inside this function. -Exit () { set +e; (exit $1); exit $1; } +# If this is bash, turn off all aliases. +test -n "$BASH_VERSION" && unalias -a -# Print warnings (e.g., about skipped and failed tests) to this file number. -# Override by defining to say, 9, in init.cfg, and putting say, -# "export ...ENVVAR_SETTINGS...; exec 9>&2; $(SHELL)" in the definition -# of TESTS_ENVIRONMENT in your tests/Makefile.am file. -# This is useful when using automake's parallel tests mode, to print -# the reason for skip/failure to console, rather than to the .log files. -: ${stderr_fileno_=2} +# Note that when supporting $EXEEXT (transparently mapping from PROG_NAME to +# PROG_NAME.exe), we want to support hyphen-containing names like test-acos. +# That is part of the shell-selection test above. Why use aliases rather +# than functions? Because support for hyphen-containing aliases is more +# widespread than that for hyphen-containing function names. +test -n "$EXEEXT" && shopt -s expand_aliases -warn_() { echo "$@" 1>&$stderr_fileno_; } -fail_() { warn_ "$ME_: failed test: $@"; Exit 1; } -skip_() { warn_ "$ME_: skipped test: $@"; Exit 77; } -framework_failure_() { warn_ "$ME_: set-up failure: $@"; Exit 1; } +# Enable glibc's malloc-perturbing option. +# This is useful for exposing code that depends on the fact that +# malloc-related functions often return memory that is mostly zeroed. +# If you have the time and cycles, use valgrind to do an even better job. +: ${MALLOC_PERTURB_=87} +export MALLOC_PERTURB_ # This is a stub function that is run upon trap (upon regular exit and # interrupt). Override it with a per-test function, e.g., to unmount # a partition, or to undo any other global state changes. -cleanup_() { :; } +cleanup_ () { :; } + +# Emit a header similar to that from diff -u; Print the simulated "diff" +# command so that the order of arguments is clear. Don't bother with @@ lines. +emit_diff_u_header_ () +{ + printf '%s\n' "diff -u $*" \ + "--- $1 1970-01-01" \ + "+++ $2 1970-01-01" +} + +# Arrange not to let diff or cmp operate on /dev/null, +# since on some systems (at least OSF/1 5.1), that doesn't work. +# When there are not two arguments, or no argument is /dev/null, return 2. +# When one argument is /dev/null and the other is not empty, +# cat the nonempty file to stderr and return 1. +# Otherwise, return 0. +compare_dev_null_ () +{ + test $# = 2 || return 2 + + if test "x$1" = x/dev/null; then + test -s "$2" || return 0 + emit_diff_u_header_ "$@"; sed 's/^/+/' "$2" + return 1 + fi + + if test "x$2" = x/dev/null; then + test -s "$1" || return 0 + emit_diff_u_header_ "$@"; sed 's/^/-/' "$1" + return 1 + fi + + return 2 +} -if ( diff --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then - compare() { diff -u "$@"; } -elif ( cmp --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then - compare() { cmp -s "$@"; } +if diff_out_=`exec 2>/dev/null; diff -u "$0" "$0" < /dev/null` \ + && diff -u Makefile "$0" 2>/dev/null | grep '^[+]#!' >/dev/null; then + # diff accepts the -u option and does not (like AIX 7 'diff') produce an + # extra space on column 1 of every content line. + if test -z "$diff_out_"; then + compare_ () { diff -u "$@"; } + else + compare_ () + { + if diff -u "$@" > diff.out; then + # No differences were found, but Solaris 'diff' produces output + # "No differences encountered". Hide this output. + rm -f diff.out + true + else + cat diff.out + rm -f diff.out + false + fi + } + fi +elif diff_out_=`exec 2>/dev/null; diff -c "$0" "$0" < /dev/null`; then + if test -z "$diff_out_"; then + compare_ () { diff -c "$@"; } + else + compare_ () + { + if diff -c "$@" > diff.out; then + # No differences were found, but AIX and HP-UX 'diff' produce output + # "No differences encountered" or "There are no differences between the + # files.". Hide this output. + rm -f diff.out + true + else + cat diff.out + rm -f diff.out + false + fi + } + fi +elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then + compare_ () { cmp -s "$@"; } else - compare() { cmp "$@"; } + compare_ () { cmp "$@"; } fi +# Usage: compare EXPECTED ACTUAL +# +# Given compare_dev_null_'s preprocessing, defer to compare_ if 2 or more. +# Otherwise, propagate $? to caller: any diffs have already been printed. +compare () +{ + # This looks like it can be factored to use a simple "case $?" + # after unchecked compare_dev_null_ invocation, but that would + # fail in a "set -e" environment. + if compare_dev_null_ "$@"; then + return 0 + else + case $? in + 1) return 1;; + *) compare_ "$@";; + esac + fi +} + # An arbitrary prefix to help distinguish test directories. -testdir_prefix_() { printf gt; } +testdir_prefix_ () { printf gt; } # Run the user-overridable cleanup_ function, remove the temporary # directory and exit with the incoming value of $?. -remove_tmp_() +remove_tmp_ () { __st=$? cleanup_ @@ -143,13 +373,21 @@ remove_tmp_() # contains only the specified bytes (see the case stmt below), then print # a space-separated list of those names and return 0. Otherwise, don't # print anything and return 1. Naming constraints apply also to DIR. -find_exe_basenames_() +find_exe_basenames_ () { feb_dir_=$1 feb_fail_=0 feb_result_= feb_sp_= for feb_file_ in $feb_dir_/*.exe; do + # If there was no *.exe file, or there existed a file named "*.exe" that + # was deleted between the above glob expansion and the existence test + # below, just skip it. + test "x$feb_file_" = "x$feb_dir_/*.exe" && test ! -f "$feb_file_" \ + && continue + # Exempt [.exe, since we can't create a function by that name, yet + # we can't invoke [ by PATH search anyways due to shell builtins. + test "x$feb_file_" = "x$feb_dir_/[.exe" && continue case $feb_file_ in *[!-a-zA-Z/0-9_.+]*) feb_fail_=1; break;; *) # Remove leading file name components as well as the .exe suffix. @@ -167,8 +405,8 @@ find_exe_basenames_() # For each file name of the form PROG.exe, create an alias named # PROG that simply invokes PROG.exe, then return 0. If any selected # file name or the directory name, $1, contains an unexpected character, -# define no function and return 1. -create_exe_shims_() +# define no alias and return 1. +create_exe_shims_ () { case $EXEEXT in '') return 0 ;; @@ -177,7 +415,7 @@ create_exe_shims_() esac base_names_=`find_exe_basenames_ $1` \ - || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 1; } + || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 0; } if test -n "$base_names_"; then for base_ in $base_names_; do @@ -190,15 +428,14 @@ create_exe_shims_() # Use this function to prepend to PATH an absolute name for each # specified, possibly-$initial_cwd_-relative, directory. -path_prepend_() +path_prepend_ () { while test $# != 0; do path_dir_=$1 case $path_dir_ in '') fail_ "invalid path dir: '$1'";; /*) abs_path_dir_=$path_dir_;; - *) abs_path_dir_=`cd "$initial_cwd_/$path_dir_" && echo "$PWD"` \ - || fail_ "invalid path dir: $path_dir_";; + *) abs_path_dir_=$initial_cwd_/$path_dir_;; esac case $abs_path_dir_ in *:*) fail_ "invalid path dir: '$abs_path_dir_'";; @@ -213,21 +450,38 @@ path_prepend_() export PATH } -setup_() +setup_ () { - test "$VERBOSE" = yes && set -x + if test "$VERBOSE" = yes; then + # Test whether set -x may cause the selected shell to corrupt an + # application's stderr. Many do, including zsh-4.3.10 and the /bin/sh + # from SunOS 5.11, OpenBSD 4.7 and Irix 5.x and 6.5. + # If enabling verbose output this way would cause trouble, simply + # issue a warning and refrain. + if $gl_set_x_corrupts_stderr_; then + warn_ "using SHELL=$SHELL with 'set -x' corrupts stderr" + else + set -x + fi + fi initial_cwd_=$PWD - ME_=`expr "./$0" : '.*/\(.*\)$'` + fail=0 pfx_=`testdir_prefix_` test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \ || fail_ "failed to create temporary directory in $initial_cwd_" - cd "$test_dir_" + cd "$test_dir_" || fail_ "failed to cd to temporary directory" + + # As autoconf-generated configure scripts do, ensure that IFS + # is defined initially, so that saving and restoring $IFS works. + gl_init_sh_nl_=' +' + IFS=" "" $gl_init_sh_nl_" - # These trap statements ensure that the temporary directory, $test_dir_, - # is removed upon exit as well as upon receipt of any of the listed signals. - trap remove_tmp_ 0 + # This trap statement, along with a trap on 0 below, ensure that the + # temporary directory, $test_dir_, is removed upon exit as well as + # upon receipt of any of the listed signals. for sig_ in 1 2 3 13 15; do eval "trap 'Exit $(expr $sig_ + 128)' $sig_" done @@ -249,7 +503,7 @@ setup_() # - make only $MAX_TRIES_ attempts # Helper function. Print $N pseudo-random bytes from a-zA-Z0-9. -rand_bytes_() +rand_bytes_ () { n_=$1 @@ -281,11 +535,11 @@ rand_bytes_() | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_ } -mktempd_() +mktempd_ () { case $# in 2);; - *) fail_ "Usage: $ME DIR TEMPLATE";; + *) fail_ "Usage: mktempd_ DIR TEMPLATE";; esac destdir_=$1 @@ -302,13 +556,12 @@ mktempd_() case $template_ in *XXXX) ;; - *) fail_ "invalid template: $template_ (must have a suffix of at least 4 X's)";; + *) fail_ \ + "invalid template: $template_ (must have a suffix of at least 4 X's)";; esac - fail=0 - # First, try to use mktemp. - d=`unset TMPDIR; mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \ + d=`unset TMPDIR; { mktemp -d -t -p "$destdir_" "$template_"; } 2>/dev/null` \ || fail=1 # The resulting name must be in the specified directory. @@ -355,3 +608,6 @@ test -f "$srcdir/init.cfg" \ && . "$srcdir/init.cfg" setup_ "$@" +# This trap is here, rather than in the setup_ function, because some +# shells run the exit trap at shell function exit, rather than script exit. +trap remove_tmp_ 0 |