diff options
Diffstat (limited to 'tests/init.sh')
| -rw-r--r-- | tests/init.sh | 534 |
1 files changed, 308 insertions, 226 deletions
diff --git a/tests/init.sh b/tests/init.sh index 93d14f5a..933fdd40 100644 --- a/tests/init.sh +++ b/tests/init.sh @@ -1,6 +1,6 @@ # source this file; set up for tests -# Copyright (C) 2009-2018 Free Software Foundation, Inc. +# Copyright (C) 2009-2022 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -60,6 +60,9 @@ # 4. Finally # $ exit +# ============================================================================= +# Elementary diagnostics + ME_=`expr "./$0" : '.*/\(.*\)$'` # Prepare PATH_SEPARATOR. @@ -109,26 +112,8 @@ skip_ () { warn_ "$ME_: skipped test: $@"; Exit 77; } fatal_ () { warn_ "$ME_: hard error: $@"; Exit 99; } framework_failure_ () { warn_ "$ME_: set-up failure: $@"; Exit 99; } -# This is used to simplify checking of the return value -# which is useful when ensuring a command fails as desired. -# I.e., just doing `command ... &&fail=1` will not catch -# a segfault in command for example. With this helper you -# instead check an explicit exit code like -# returns_ 1 command ... || fail -returns_ () { - # Disable tracing so it doesn't interfere with stderr of the wrapped command - { set +x; } 2>/dev/null - - local exp_exit="$1" - shift - "$@" - test $? -eq $exp_exit && ret_=0 || ret_=1 - - if test "$VERBOSE" = yes && test "$gl_set_x_corrupts_stderr_" = false; then - set -x - fi - { return $ret_; } 2>/dev/null -} +# ============================================================================= +# Ensure the shell supports modern syntax. # Sanitize this shell to POSIX mode, if possible. DUALCASE=1; export DUALCASE @@ -144,6 +129,8 @@ else fi # We require $(...) support unconditionally. +# We require that the printf built-in work correctly regarding octal escapes; +# this eliminates /bin/sh on AIX 7.2. # We require non-surprising "local" semantics (this eliminates dash). # This takes the admittedly draconian step of eliminating dash, because the # assignment tab=$(printf '\t') works fine, yet preceding it with "local " @@ -173,6 +160,12 @@ fi # ? - not ok gl_shell_test_script_=' test $(echo y) = y || exit 1 +LC_ALL=en_US.UTF-8 printf "\\351" 2>/dev/null \ + | LC_ALL=C tr "\\351" x | LC_ALL=C grep "^x$" > /dev/null \ + || exit 1 +printf "\\351" 2>/dev/null \ + | LC_ALL=C tr "\\351" x | LC_ALL=C grep "^x$" > /dev/null \ + || exit 1 f_local_() { local v=1; }; f_local_ || exit 1 f_dash_local_fail_() { local t=$(printf " 1"); }; f_dash_local_fail_ score_=10 @@ -255,6 +248,9 @@ else fi fi +# ============================================================================= +# Ensure the shell behaves reasonably. + # If this is bash, turn off all aliases. test -n "$BASH_VERSION" && unalias -a @@ -265,99 +261,194 @@ test -n "$BASH_VERSION" && unalias -a # widespread than that for hyphen-containing function names. test -n "$EXEEXT" && test -n "$BASH_VERSION" && shopt -s expand_aliases -# Enable glibc's malloc-perturbing option. -# This is useful for exposing code that depends on the fact that -# malloc-related functions often return memory that is mostly zeroed. -# If you have the time and cycles, use valgrind to do an even better job. -: ${MALLOC_PERTURB_=87} -export MALLOC_PERTURB_ +# ============================================================================= +# Creating a temporary directory (needed by the core test framework) -# This is a stub function that is run upon trap (upon regular exit and -# interrupt). Override it with a per-test function, e.g., to unmount -# a partition, or to undo any other global state changes. -cleanup_ () { :; } +# Create a temporary directory, much like mktemp -d does. +# Written by Jim Meyering. +# +# Usage: mktempd_ /tmp phoey.XXXXXXXXXX +# +# First, try to use the mktemp program. +# Failing that, we'll roll our own mktemp-like function: +# - try to get random bytes from /dev/urandom +# - failing that, generate output from a combination of quickly-varying +# sources and gzip. Ignore non-varying gzip header, and extract +# "random" bits from there. +# - given those bits, map to file-name bytes using tr, and try to create +# the desired directory. +# - make only $MAX_TRIES_ attempts -# Emit a header similar to that from diff -u; Print the simulated "diff" -# command so that the order of arguments is clear. Don't bother with @@ lines. -emit_diff_u_header_ () +# Helper function. Print $N pseudo-random bytes from a-zA-Z0-9. +rand_bytes_ () { - printf '%s\n' "diff -u $*" \ - "--- $1 1970-01-01" \ - "+++ $2 1970-01-01" + n_=$1 + + # Maybe try openssl rand -base64 $n_prime_|tr '+/=\012' abcd first? + # But if they have openssl, they probably have mktemp, too. + + chars_=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 + dev_rand_=/dev/urandom + if test -r "$dev_rand_"; then + # Note: 256-length($chars_) == 194; 3 copies of $chars_ is 186 + 8 = 194. + dd ibs=$n_ count=1 if=$dev_rand_ 2>/dev/null \ + | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_ + return + fi + + n_plus_50_=`expr $n_ + 50` + cmds_='date; date +%N; free; who -a; w; ps auxww; ps -ef' + data_=` (eval "$cmds_") 2>&1 | gzip ` + + # Ensure that $data_ has length at least 50+$n_ + while :; do + len_=`echo "$data_"|wc -c` + test $n_plus_50_ -le $len_ && break; + data_=` (echo "$data_"; eval "$cmds_") 2>&1 | gzip ` + done + + echo "$data_" \ + | dd bs=1 skip=50 count=$n_ 2>/dev/null \ + | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_ } -# Arrange not to let diff or cmp operate on /dev/null, -# since on some systems (at least OSF/1 5.1), that doesn't work. -# When there are not two arguments, or no argument is /dev/null, return 2. -# When one argument is /dev/null and the other is not empty, -# cat the nonempty file to stderr and return 1. -# Otherwise, return 0. -compare_dev_null_ () +mktempd_ () { - test $# = 2 || return 2 + case $# in + 2);; + *) fail_ "Usage: mktempd_ DIR TEMPLATE";; + esac - if test "x$1" = x/dev/null; then - test -s "$2" || return 0 - emit_diff_u_header_ "$@"; sed 's/^/+/' "$2" - return 1 - fi + destdir_=$1 + template_=$2 - if test "x$2" = x/dev/null; then - test -s "$1" || return 0 - emit_diff_u_header_ "$@"; sed 's/^/-/' "$1" - return 1 - fi + MAX_TRIES_=4 - return 2 + # Disallow any trailing slash on specified destdir: + # it would subvert the post-mktemp "case"-based destdir test. + case $destdir_ in + / | //) destdir_slash_=$destdir;; + */) fail_ "invalid destination dir: remove trailing slash(es)";; + *) destdir_slash_=$destdir_/;; + esac + + case $template_ in + *XXXX) ;; + *) fail_ \ + "invalid template: $template_ (must have a suffix of at least 4 X's)";; + esac + + # First, try to use mktemp. + d=`unset TMPDIR; { mktemp -d -t -p "$destdir_" "$template_"; } 2>/dev/null` && + + # The resulting name must be in the specified directory. + case $d in "$destdir_slash_"*) :;; *) false;; esac && + + # It must have created the directory. + test -d "$d" && + + # It must have 0700 permissions. Handle sticky "S" bits. + perms=`ls -dgo "$d" 2>/dev/null` && + case $perms in drwx--[-S]---*) :;; *) false;; esac && { + echo "$d" + return + } + + # If we reach this point, we'll have to create a directory manually. + + # Get a copy of the template without its suffix of X's. + base_template_=`echo "$template_"|sed 's/XX*$//'` + + # Calculate how many X's we've just removed. + template_length_=`echo "$template_" | wc -c` + nx_=`echo "$base_template_" | wc -c` + nx_=`expr $template_length_ - $nx_` + + err_= + i_=1 + while :; do + X_=`rand_bytes_ $nx_` + candidate_dir_="$destdir_slash_$base_template_$X_" + err_=`mkdir -m 0700 "$candidate_dir_" 2>&1` \ + && { echo "$candidate_dir_"; return; } + test $MAX_TRIES_ -le $i_ && break; + i_=`expr $i_ + 1` + done + fail_ "$err_" } -for diff_opt_ in -u -U3 -c '' no; do - test "$diff_opt_" != no && - diff_out_=`exec 2>/dev/null; diff $diff_opt_ "$0" "$0" < /dev/null` && - break -done -if test "$diff_opt_" != no; then - if test -z "$diff_out_"; then - compare_ () { diff $diff_opt_ "$@"; } - else - compare_ () - { - # If no differences were found, AIX and HP-UX 'diff' produce output - # like "No differences encountered". Hide this output. - diff $diff_opt_ "$@" > diff.out - diff_status_=$? - test $diff_status_ -eq 0 || cat diff.out || diff_status_=2 - rm -f diff.out || diff_status_=2 - return $diff_status_ - } - fi -elif cmp -s /dev/null /dev/null 2>/dev/null; then - compare_ () { cmp -s "$@"; } -else - compare_ () { cmp "$@"; } -fi +# ============================================================================= +# Core test framework -# Usage: compare EXPECTED ACTUAL -# -# Given compare_dev_null_'s preprocessing, defer to compare_ if 2 or more. -# Otherwise, propagate $? to caller: any diffs have already been printed. -compare () +# An arbitrary prefix to help distinguish test directories. +testdir_prefix_ () { printf gt; } + +# Set up the environment for the test to run in. +setup_ () { - # This looks like it can be factored to use a simple "case $?" - # after unchecked compare_dev_null_ invocation, but that would - # fail in a "set -e" environment. - if compare_dev_null_ "$@"; then - return 0 - else - case $? in - 1) return 1;; - *) compare_ "$@";; - esac + if test "$VERBOSE" = yes; then + # Test whether set -x may cause the selected shell to corrupt an + # application's stderr. Many do, including zsh-4.3.10 and the /bin/sh + # from SunOS 5.11, OpenBSD 4.7 and Irix 6.5. + # If enabling verbose output this way would cause trouble, simply + # issue a warning and refrain. + if $gl_set_x_corrupts_stderr_; then + warn_ "using SHELL=$SHELL with 'set -x' corrupts stderr" + else + set -x + fi fi + + initial_cwd_=$PWD + + # Create and enter the temporary directory. + pfx_=`testdir_prefix_` + test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \ + || fail_ "failed to create temporary directory in $initial_cwd_" + cd "$test_dir_" || fail_ "failed to cd to temporary directory" + # Set variables srcdir, builddir, for the convenience of the test. + case $srcdir in + /* | ?:*) ;; + *) srcdir="../$srcdir" ;; + esac + builddir=".." + export srcdir builddir + + # As autoconf-generated configure scripts do, ensure that IFS + # is defined initially, so that saving and restoring $IFS works. + gl_init_sh_nl_=' +' + IFS=" "" $gl_init_sh_nl_" + + # This trap statement, along with a trap on 0 below, ensure that the + # temporary directory, $test_dir_, is removed upon exit as well as + # upon receipt of any of the listed signals. + for sig_ in 1 2 3 13 15; do + eval "trap 'Exit $(expr $sig_ + 128)' $sig_" + done + + # Remove relative and non-accessible directories from PATH, including '.' + # and Zero-length entries. + saved_IFS="$IFS" + IFS=: + new_PATH= + sep_= + for dir in $PATH; do + case "$dir" in + /*) test -d "$dir/." || continue + new_PATH="${new_PATH}${sep_}${dir}" + sep_=':';; + esac + done + IFS="$saved_IFS" + PATH="$new_PATH" + export PATH } -# An arbitrary prefix to help distinguish test directories. -testdir_prefix_ () { printf gt; } +# This is a stub function that is run upon trap (upon regular exit and +# interrupt). Override it with a per-test function, e.g., to unmount +# a partition, or to undo any other global state changes. +cleanup_ () { :; } # Run the user-overridable cleanup_ function, remove the temporary # directory and exit with the incoming value of $?. @@ -377,6 +468,9 @@ remove_tmp_ () exit $__st } +# ============================================================================= +# Prepending directories to PATH + # Given a directory name, DIR, if every entry in it that matches *.exe # contains only the specified bytes (see the case stmt below), then print # a space-separated list of those names and return 0. Otherwise, don't @@ -458,160 +552,148 @@ path_prepend_ () export PATH } -setup_ () -{ - if test "$VERBOSE" = yes; then - # Test whether set -x may cause the selected shell to corrupt an - # application's stderr. Many do, including zsh-4.3.10 and the /bin/sh - # from SunOS 5.11, OpenBSD 4.7 and Irix 5.x and 6.5. - # If enabling verbose output this way would cause trouble, simply - # issue a warning and refrain. - if $gl_set_x_corrupts_stderr_; then - warn_ "using SHELL=$SHELL with 'set -x' corrupts stderr" - else - set -x - fi - fi +# ============================================================================= +# Convenience environment variables for the tests - initial_cwd_=$PWD +# ----------------------------------------------------------------------------- - pfx_=`testdir_prefix_` - test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \ - || fail_ "failed to create temporary directory in $initial_cwd_" - cd "$test_dir_" || fail_ "failed to cd to temporary directory" +# Enable glibc's malloc-perturbing option. +# This is useful for exposing code that depends on the fact that +# malloc-related functions often return memory that is mostly zeroed. +# If you have the time and cycles, use valgrind to do an even better job. +: ${MALLOC_PERTURB_=87} +export MALLOC_PERTURB_ - # As autoconf-generated configure scripts do, ensure that IFS - # is defined initially, so that saving and restoring $IFS works. - gl_init_sh_nl_=' -' - IFS=" "" $gl_init_sh_nl_" +# ----------------------------------------------------------------------------- - # This trap statement, along with a trap on 0 below, ensure that the - # temporary directory, $test_dir_, is removed upon exit as well as - # upon receipt of any of the listed signals. - for sig_ in 1 2 3 13 15; do - eval "trap 'Exit $(expr $sig_ + 128)' $sig_" - done -} +# The interpreter for Bourne-shell scripts. +# No special standards compatibility requirements. +# Some environments, such as Android, don't have /bin/sh. +if test -f /bin/sh$EXEEXT; then + BOURNE_SHELL=/bin/sh +else + BOURNE_SHELL=sh +fi -# Create a temporary directory, much like mktemp -d does. -# Written by Jim Meyering. -# -# Usage: mktempd_ /tmp phoey.XXXXXXXXXX -# -# First, try to use the mktemp program. -# Failing that, we'll roll our own mktemp-like function: -# - try to get random bytes from /dev/urandom -# - failing that, generate output from a combination of quickly-varying -# sources and gzip. Ignore non-varying gzip header, and extract -# "random" bits from there. -# - given those bits, map to file-name bytes using tr, and try to create -# the desired directory. -# - make only $MAX_TRIES_ attempts +# ============================================================================= +# Convenience functions for the tests -# Helper function. Print $N pseudo-random bytes from a-zA-Z0-9. -rand_bytes_ () -{ - n_=$1 +# ----------------------------------------------------------------------------- +# Return value checking - # Maybe try openssl rand -base64 $n_prime_|tr '+/=\012' abcd first? - # But if they have openssl, they probably have mktemp, too. +# This is used to simplify checking of the return value +# which is useful when ensuring a command fails as desired. +# I.e., just doing `command ... &&fail=1` will not catch +# a segfault in command for example. With this helper you +# instead check an explicit exit code like +# returns_ 1 command ... || fail +returns_ () { + # Disable tracing so it doesn't interfere with stderr of the wrapped command + { set +x; } 2>/dev/null - chars_=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 - dev_rand_=/dev/urandom - if test -r "$dev_rand_"; then - # Note: 256-length($chars_) == 194; 3 copies of $chars_ is 186 + 8 = 194. - dd ibs=$n_ count=1 if=$dev_rand_ 2>/dev/null \ - | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_ - return - fi + local exp_exit="$1" + shift + "$@" + test $? -eq $exp_exit && ret_=0 || ret_=1 - n_plus_50_=`expr $n_ + 50` - cmds_='date; date +%N; free; who -a; w; ps auxww; ps -ef' - data_=` (eval "$cmds_") 2>&1 | gzip ` + if test "$VERBOSE" = yes && test "$gl_set_x_corrupts_stderr_" = false; then + set -x + fi + { return $ret_; } 2>/dev/null +} - # Ensure that $data_ has length at least 50+$n_ - while :; do - len_=`echo "$data_"|wc -c` - test $n_plus_50_ -le $len_ && break; - data_=` (echo "$data_"; eval "$cmds_") 2>&1 | gzip ` - done +# ----------------------------------------------------------------------------- +# Text file comparison - echo "$data_" \ - | dd bs=1 skip=50 count=$n_ 2>/dev/null \ - | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_ +# Emit a header similar to that from diff -u; Print the simulated "diff" +# command so that the order of arguments is clear. Don't bother with @@ lines. +emit_diff_u_header_ () +{ + printf '%s\n' "diff -u $*" \ + "--- $1 1970-01-01" \ + "+++ $2 1970-01-01" } -mktempd_ () +# Arrange not to let diff or cmp operate on /dev/null, +# since on some systems (at least OSF/1 5.1), that doesn't work. +# When there are not two arguments, or no argument is /dev/null, return 2. +# When one argument is /dev/null and the other is not empty, +# cat the nonempty file to stderr and return 1. +# Otherwise, return 0. +compare_dev_null_ () { - case $# in - 2);; - *) fail_ "Usage: mktempd_ DIR TEMPLATE";; - esac - - destdir_=$1 - template_=$2 - - MAX_TRIES_=4 - - # Disallow any trailing slash on specified destdir: - # it would subvert the post-mktemp "case"-based destdir test. - case $destdir_ in - / | //) destdir_slash_=$destdir;; - */) fail_ "invalid destination dir: remove trailing slash(es)";; - *) destdir_slash_=$destdir_/;; - esac - - case $template_ in - *XXXX) ;; - *) fail_ \ - "invalid template: $template_ (must have a suffix of at least 4 X's)";; - esac - - # First, try to use mktemp. - d=`unset TMPDIR; { mktemp -d -t -p "$destdir_" "$template_"; } 2>/dev/null` && - - # The resulting name must be in the specified directory. - case $d in "$destdir_slash_"*) :;; *) false;; esac && - - # It must have created the directory. - test -d "$d" && + test $# = 2 || return 2 - # It must have 0700 permissions. Handle sticky "S" bits. - perms=`ls -dgo "$d" 2>/dev/null` && - case $perms in drwx--[-S]---*) :;; *) false;; esac && { - echo "$d" - return - } + if test "x$1" = x/dev/null; then + test -s "$2" || return 0 + emit_diff_u_header_ "$@"; sed 's/^/+/' "$2" + return 1 + fi - # If we reach this point, we'll have to create a directory manually. + if test "x$2" = x/dev/null; then + test -s "$1" || return 0 + emit_diff_u_header_ "$@"; sed 's/^/-/' "$1" + return 1 + fi - # Get a copy of the template without its suffix of X's. - base_template_=`echo "$template_"|sed 's/XX*$//'` + return 2 +} - # Calculate how many X's we've just removed. - template_length_=`echo "$template_" | wc -c` - nx_=`echo "$base_template_" | wc -c` - nx_=`expr $template_length_ - $nx_` +for diff_opt_ in -u -U3 -c '' no; do + test "$diff_opt_" != no && + diff_out_=`exec 2>/dev/null; diff $diff_opt_ "$0" "$0" < /dev/null` && + break +done +if test "$diff_opt_" != no; then + if test -z "$diff_out_"; then + compare_ () { diff $diff_opt_ "$@"; } + else + compare_ () + { + # If no differences were found, AIX and HP-UX 'diff' produce output + # like "No differences encountered". Hide this output. + diff $diff_opt_ "$@" > diff.out + diff_status_=$? + test $diff_status_ -eq 0 || cat diff.out || diff_status_=2 + rm -f diff.out || diff_status_=2 + return $diff_status_ + } + fi +elif cmp -s /dev/null /dev/null 2>/dev/null; then + compare_ () { cmp -s "$@"; } +else + compare_ () { cmp "$@"; } +fi - err_= - i_=1 - while :; do - X_=`rand_bytes_ $nx_` - candidate_dir_="$destdir_slash_$base_template_$X_" - err_=`mkdir -m 0700 "$candidate_dir_" 2>&1` \ - && { echo "$candidate_dir_"; return; } - test $MAX_TRIES_ -le $i_ && break; - i_=`expr $i_ + 1` - done - fail_ "$err_" +# Usage: compare EXPECTED ACTUAL +# +# Given compare_dev_null_'s preprocessing, defer to compare_ if 2 or more. +# Otherwise, propagate $? to caller: any diffs have already been printed. +compare () +{ + # This looks like it can be factored to use a simple "case $?" + # after unchecked compare_dev_null_ invocation, but that would + # fail in a "set -e" environment. + if compare_dev_null_ "$@"; then + return 0 + else + case $? in + 1) return 1;; + *) compare_ "$@";; + esac + fi } +# ----------------------------------------------------------------------------- + # If you want to override the testdir_prefix_ function, # or to add more utility functions, use this file. test -f "$srcdir/init.cfg" \ && . "$srcdir/init.cfg" +# ============================================================================= +# Set up the environment for the test to run in. + setup_ "$@" # This trap is here, rather than in the setup_ function, because some # shells run the exit trap at shell function exit, rather than script exit. |