From a9a31b1de5776a3b08a82101a4fa711294f0dd1d Mon Sep 17 00:00:00 2001 From: "Manuel A. Fernandez Montecelo" Date: Fri, 27 May 2016 14:28:30 +0100 Subject: Imported Upstream version 0.9.6+really0.9.3 --- build-aux/ltmain.sh | 3905 ++++++++++++++++++--------------------------------- 1 file changed, 1388 insertions(+), 2517 deletions(-) (limited to 'build-aux/ltmain.sh') diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh index 63ae69dc..271873d3 100644 --- a/build-aux/ltmain.sh +++ b/build-aux/ltmain.sh @@ -1,9 +1,9 @@ +# Generated from ltmain.m4sh. -# libtool (GNU libtool) 2.4.2 +# ltmain.sh (GNU libtool) 2.2.6 # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -32,57 +32,50 @@ # # Provide generalized library-building support services. # -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --no-warn don't display warning messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message # # MODE must be one of the following: # -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory # -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# MODE-ARGS vary depending on the MODE. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 -# automake: $automake_version -# autoconf: $autoconf_version +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6 +# automake: $automake_version +# autoconf: $autoconf_version # # Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . -PROGRAM=libtool +PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=2.4.2 +VERSION=2.2.6 TIMESTAMP="" -package_revision=1.3337 +package_revision=1.3012 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -98,15 +91,10 @@ fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - # NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES @@ -119,28 +107,24 @@ do lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL $lt_unset CDPATH -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" : ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${ECHO="echo"} +: ${EGREP="/usr/bin/grep -E"} +: ${FGREP="/usr/bin/grep -F"} +: ${GREP="/usr/bin/grep"} +: ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} +: ${SED="/opt/local/bin/gsed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} @@ -160,27 +144,6 @@ IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation - - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation - - # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: @@ -195,183 +158,33 @@ func_basename () # those functions but instead duplicate the functionality here. func_dirname_and_basename () { - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation - - -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' - -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi +# Generated shell functions inserted here. - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" # The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac # Make sure we have an absolute path for reexecution: case $progpath in @@ -383,7 +196,7 @@ case $progpath in ;; *) save_IFS="$IFS" - IFS=${PATH_SEPARATOR-:} + IFS=: for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break @@ -402,15 +215,6 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' - -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. @@ -439,7 +243,7 @@ opt_warning=: # name if it has been set yet. func_echo () { - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" + $ECHO "$progname${mode+: }$mode: $*" } # func_verbose arg... @@ -454,25 +258,18 @@ func_verbose () : } -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - # func_error arg... # Echo program name prefixed message to standard error. func_error () { - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 # bash bug again: : @@ -529,9 +326,9 @@ func_mkdir_p () case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do @@ -581,7 +378,7 @@ func_mktempdir () func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - $ECHO "$my_tmpdir" + $ECHO "X$my_tmpdir" | $Xsed } @@ -595,7 +392,7 @@ func_quote_for_eval () { case $1 in *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac @@ -622,7 +419,7 @@ func_quote_for_expand () { case $1 in *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ + my_arg=`$ECHO "X$1" | $Xsed \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; @@ -691,39 +488,15 @@ func_show_eval_locale () fi } -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} + + # func_version # Echo version message to standard output and exit. func_version () { - $opt_debug - - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ @@ -736,28 +509,22 @@ func_version () # Echo short help message to standard output and exit. func_usage () { - $opt_debug - - $SED -n '/^# Usage:/,/^# *.*--help/ { + $SED -n '/^# Usage:/,/# -h/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" - echo + $ECHO $ECHO "run \`$progname --help | more' for full usage" exit $? } -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. +# func_help +# Echo long help message to standard output and exit. func_help () { - $opt_debug - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print s/^# // s/^# *$// s*\$progname*'$progname'* @@ -767,18 +534,11 @@ func_help () s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi + }' < "$progpath" + exit $? } # func_missing_arg argname @@ -786,106 +546,63 @@ func_help () # exit_cmd. func_missing_arg () { - $opt_debug - - func_error "missing argument for $1." + func_error "missing argument for $1" exit_cmd=exit } +exit_cmd=: -# func_split_short_opt shortopt -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () -{ - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' - - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation - - -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () -{ - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation - -exit_cmd=: +# Check that we have a working $ECHO. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation - - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation - - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation - - # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. @@ -919,16 +636,16 @@ func_config () # Display the features supported by this script. func_features () { - echo "host: $host" + $ECHO "host: $host" if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" + $ECHO "enable shared libraries" else - echo "disable shared libraries" + $ECHO "disable shared libraries" fi if test "$build_old_libs" = yes; then - echo "enable static libraries" + $ECHO "enable static libraries" else - echo "disable static libraries" + $ECHO "disable static libraries" fi exit $? @@ -975,209 +692,117 @@ func_enable_tag () esac } -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. { - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac - - - -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_warning=: -opt_verbose=: -opt_silent=false -opt_verbose=false + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do + # Parse non-mode specific arguments: + while test "$#" -gt 0; do opt="$1" shift + case $opt in - --debug|-x) opt_debug='set -x' + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" func_echo "enabling shell trace mode" + opt_debug='set -x' $opt_debug ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" shift ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" shift ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-warning|--no-warn) - opt_warning=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here shift ;; - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} shift ;; - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; + *) nonopt="$opt" + break + ;; esac done - # Validate options: - - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi - - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) @@ -1185,44 +810,82 @@ func_enable_tag "$optarg" opt_duplicate_compiler_generated_deps=: ;; *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ;; esac - $opt_help || { - # Sanity checks first: - func_check_version_match + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF fi - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" + exit $EXIT_MISMATCH + fi +} - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } +## ----------- ## +## Main. ## +## ----------- ## +$opt_help || { + # Sanity checks first: + func_check_version_match - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE -} + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} -## ----------- ## -## Main. ## -## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. @@ -1287,9 +950,12 @@ func_ltwrapper_executable_p () # temporary ltwrapper_script. func_ltwrapper_scriptname () { - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi } # func_ltwrapper_p file @@ -1335,37 +1001,6 @@ func_source () } -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case "$lt_sysroot:$1" in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. @@ -1378,15 +1013,13 @@ func_infer_tag () if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do - func_append_quoted CC_quoted "$arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) @@ -1397,13 +1030,11 @@ func_infer_tag () CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. @@ -1462,489 +1093,9 @@ pic_object=$write_lobj non_pic_object=$write_oldobj EOF - $MV "${write_libobj}T" "${write_libobj}" - } -} - - -################################################## -# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # -################################################## - -# func_convert_core_file_wine_to_w32 ARG -# Helper function used by file name conversion functions when $build is *nix, -# and $host is mingw, cygwin, or some other w32 environment. Relies on a -# correctly configured wine environment available, with the winepath program -# in $build's $PATH. -# -# ARG is the $build file name to be converted to w32 format. -# Result is available in $func_convert_core_file_wine_to_w32_result, and will -# be empty on error (or when ARG is empty) -func_convert_core_file_wine_to_w32 () -{ - $opt_debug - func_convert_core_file_wine_to_w32_result="$1" - if test -n "$1"; then - # Unfortunately, winepath does not exit with a non-zero error code, so we - # are forced to check the contents of stdout. On the other hand, if the - # command is not found, the shell will set an exit code of 127 and print - # *an error message* to stdout. So we must check for both error code of - # zero AND non-empty stdout, which explains the odd construction: - func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $opt_debug - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $opt_debug - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $opt_debug - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $opt_debug - if test -z "$2" && test -n "$1" ; then - func_error "Could not determine host file name corresponding to" - func_error " \`$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result="$1" - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $opt_debug - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " \`$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result="$3" - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $opt_debug - case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via `$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $opt_debug - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $opt_debug - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result="$1" -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via `$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $opt_debug - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $opt_debug - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result="$1" -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi + $MV "${write_libobj}T" "${write_libobj}" + } } -# end func_convert_path_nix_to_cygwin - # func_mode_compile arg... func_mode_compile () @@ -1986,12 +1137,12 @@ func_mode_compile () ;; -pie | -fpie | -fPIE) - func_append pie_flag " $arg" + pie_flag="$pie_flag $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" + later="$later $arg" continue ;; @@ -2012,14 +1163,15 @@ func_mode_compile () save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" - func_append_quoted lastarg "$arg" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. - func_append base_compile " $lastarg" + base_compile="$base_compile $lastarg" continue ;; @@ -2035,7 +1187,8 @@ func_mode_compile () esac # case $arg_mode # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" done # for arg case $arg_mode in @@ -2060,7 +1213,7 @@ func_mode_compile () *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + *.[fF][09]? | *.for | *.java | *.obj | *.sx) func_xform "$libobj" libobj=$func_xform_result ;; @@ -2135,7 +1288,7 @@ func_mode_compile () # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= @@ -2166,16 +1319,17 @@ compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - func_append removelist " $output_obj" + removelist="$removelist $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" + removelist="$removelist $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result @@ -2195,7 +1349,7 @@ compiler." if test -z "$output_obj"; then # Place PIC objects in $objdir - func_append command " -o $lobj" + command="$command -o $lobj" fi func_show_eval_locale "$command" \ @@ -2242,11 +1396,11 @@ compiler." command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then - func_append command " -o $obj" + command="$command -o $obj" fi # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" + command="$command$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' @@ -2291,13 +1445,13 @@ compiler." } $opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +test "$mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. - case $opt_mode in + case $mode in "") # Generic help is extracted from the usage comments # at the start of this file. @@ -2328,11 +1482,10 @@ This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. @@ -2385,7 +1538,7 @@ either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." @@ -2405,8 +1558,6 @@ The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) @@ -2435,11 +1586,6 @@ The following components of LINK-COMMAND are treated specially: -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. @@ -2473,44 +1619,18 @@ Otherwise, only FILE itself is deleted using RM." ;; *) - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode \`$mode'" ;; esac - echo + $ECHO $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? } -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test "$opt_help" = :; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - sed '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help # func_mode_execute arg... @@ -2523,16 +1643,13 @@ func_mode_execute () func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. - for file in $opt_dlopen; do + for file in $execute_dlfiles; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" @@ -2554,7 +1671,7 @@ func_mode_execute () dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" + dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" @@ -2595,7 +1712,7 @@ func_mode_execute () for file do case $file in - -* | *.la | *.lo ) ;; + -*) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then @@ -2611,7 +1728,8 @@ func_mode_execute () ;; esac # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" done if test "X$opt_dry_run" = Xfalse; then @@ -2636,66 +1754,29 @@ func_mode_execute () # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" + $ECHO "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} +test "$mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug - libs= - libdirs= + libdirs="$nonopt" admincmds= - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "\`$opt' is not a valid libtool archive" - fi - - else - func_fatal_error "invalid argument \`$opt'" - fi - done - - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. @@ -2705,7 +1786,7 @@ func_mode_finish () if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " + $opt_dry_run || eval "$cmds" || admincmds="$admincmds $cmds" fi done @@ -2714,55 +1795,53 @@ func_mode_finish () # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" + $ECHO " - use the \`$flag' linker flag" fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS } -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} +test "$mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... @@ -2773,7 +1852,7 @@ func_mode_install () # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -2787,12 +1866,7 @@ func_mode_install () # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac + install_prog="$install_prog$func_quote_for_eval_result" # We need to accept at least all the BSD install flags. dest= @@ -2802,12 +1876,10 @@ func_mode_install () install_type= isdir=no stripme= - no_mode=: for arg do - arg2= if test -n "$dest"; then - func_append files " $dest" + files="$files $dest" dest=$arg continue fi @@ -2815,9 +1887,10 @@ func_mode_install () case $arg in -d) isdir=yes ;; -f) - if $install_cp; then :; else - prev=$arg - fi + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac ;; -g | -m | -o) prev=$arg @@ -2831,10 +1904,6 @@ func_mode_install () *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi prev= else dest=$arg @@ -2845,11 +1914,7 @@ func_mode_install () # Aesthetically quote the argument. func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" + install_prog="$install_prog $func_quote_for_eval_result" done test -z "$install_prog" && \ @@ -2858,13 +1923,6 @@ func_mode_install () test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" @@ -2919,13 +1977,10 @@ func_mode_install () case $file in *.$libext) # Do the static libraries later. - func_append staticlibs " $file" + staticlibs="$staticlibs $file" ;; *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" @@ -2939,23 +1994,23 @@ func_mode_install () if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; + *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; + *) future_libdirs="$future_libdirs $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" - func_append dir "$objdir" + dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that @@ -2968,9 +2023,9 @@ func_mode_install () if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" @@ -2988,7 +2043,7 @@ func_mode_install () test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in @@ -3028,7 +2083,7 @@ func_mode_install () func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) @@ -3128,7 +2183,7 @@ func_mode_install () if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no @@ -3147,7 +2202,7 @@ func_mode_install () file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" @@ -3166,7 +2221,7 @@ func_mode_install () } else # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi @@ -3202,13 +2257,11 @@ func_mode_install () # Set up the ranlib parameters. oldlib="$destdir/$name" - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + func_show_eval "$old_striplib $oldlib" 'exit $?' fi # Do each command in the postinstall commands. @@ -3227,7 +2280,7 @@ func_mode_install () fi } -test "$opt_mode" = install && func_mode_install ${1+"$@"} +test "$mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -3270,22 +2323,6 @@ func_generate_dlsyms () extern \"C\" { #endif -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - /* External symbol declarations for the compiler. */\ " @@ -3295,11 +2332,10 @@ extern \"C\" { $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then @@ -3335,7 +2371,7 @@ extern \"C\" { eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; @@ -3348,52 +2384,10 @@ extern \"C\" { func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } done $opt_dry_run || { @@ -3421,19 +2415,36 @@ extern \"C\" { if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" fi - echo >> "$output_objdir/$my_dlsyms" "\ + $ECHO >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; -LT_DLSYM_CONST lt_dlsymlist +$lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," @@ -3446,7 +2457,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] = eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac - echo >> "$output_objdir/$my_dlsyms" "\ + $ECHO >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; @@ -3473,7 +2484,7 @@ static const void *lt_preloaded_setup() { # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; @@ -3489,7 +2500,7 @@ static const void *lt_preloaded_setup() { for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; + *) symtab_cflags="$symtab_cflags $arg" ;; esac done @@ -3504,16 +2515,16 @@ static const void *lt_preloaded_setup() { case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` fi ;; *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ;; esac ;; @@ -3527,8 +2538,8 @@ static const void *lt_preloaded_setup() { # really was required. # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi } @@ -3538,7 +2549,6 @@ static const void *lt_preloaded_setup() { # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug @@ -3549,11 +2559,9 @@ func_win32_libid () win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | $SED -n -e ' 1,100{ / I /{ @@ -3582,131 +2590,6 @@ func_win32_libid () $ECHO "$win32_libid_type" } -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $opt_debug - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $opt_debug - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result="" - fi -} # func_extract_an_archive dir oldlib @@ -3715,18 +2598,7 @@ func_extract_an_archive () $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then - $opt_dry_run || rm -f "$lockfile" - fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else @@ -3797,7 +2669,7 @@ func_extract_archives () darwin_file= darwin_files= for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ @@ -3812,30 +2684,25 @@ func_extract_archives () func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. + +# func_emit_wrapper_part1 [arg=no] # -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () { - func_emit_wrapper_arg1=${1-no} + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi $ECHO "\ #! $SHELL @@ -3851,6 +2718,7 @@ func_emit_wrapper () # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible @@ -3881,135 +2749,31 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - case \" \$* \" in - *\\ --lt-*) - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. shift - done ;; - esac - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $ECHO "\ # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then @@ -4019,13 +2783,30 @@ func_exec_program () esac fi - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then @@ -4033,7 +2814,7 @@ func_exec_program () fi # remove .libs from thisdir case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi @@ -4088,18 +2869,6 @@ func_exec_program () if test -f \"\$progdir/\$program\"; then" - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ @@ -4108,28 +2877,253 @@ func_exec_program () # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi -fi\ -" +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi } +# end: func_to_host_path +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout @@ -4147,23 +3141,31 @@ func_emit_cwrapperexe_src () This wrapper executable should never be moved out of the build directory. If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "$SHELL $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. */ EOF cat <<"EOF" -#ifdef _MSC_VER -# define _CRT_SECURE_NO_DEPRECATE 1 -#endif #include #include #ifdef _MSC_VER # include # include # include +# define setmode _setmode #else # include # include # ifdef __CYGWIN__ # include +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif # endif #endif #include @@ -4175,44 +3177,6 @@ EOF #include #include -/* declarations of non-ANSI functions */ -#if defined(__MINGW32__) -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined(__CYGWIN__) -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined (other platforms) ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined(__CYGWIN__) -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ -#endif - #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) @@ -4228,7 +3192,14 @@ int setenv (const char *, const char *, int); # define S_IXGRP 0 #endif -/* path handling portability macros */ +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' @@ -4259,6 +3230,10 @@ int setenv (const char *, const char *, int); # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + #ifndef FOPEN_WB # define FOPEN_WB "w" #endif @@ -4271,13 +3246,22 @@ int setenv (const char *, const char *, int); if (stale) { free ((void *) stale); stale = 0; } \ } while (0) -#if defined(LT_DEBUGWRAPPER) -static int lt_debug = 1; +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} #else -static int lt_debug = 0; +# define LTWRAPPER_DEBUGPRINTF(args) #endif -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ +const char *program_name = NULL; void *xmalloc (size_t num); char *xstrdup (const char *string); @@ -4287,27 +3271,42 @@ char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); +void lt_fatal (const char *message, ...); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <"))); for (i = 0; i < newargc; i++) { - lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", - i, nonnull (newargz[i])); + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); } EOF @@ -4528,9 +3566,7 @@ EOF if (rval == -1) { /* failed to start process */ - lt_debugprintf (__FILE__, __LINE__, - "(main) failed to launch target \"%s\": %s\n", - lt_argv_zero, nonnull (strerror (errno))); + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); return 127; } return rval; @@ -4552,7 +3588,7 @@ xmalloc (size_t num) { void *p = (void *) malloc (num); if (!p) - lt_fatal (__FILE__, __LINE__, "memory exhausted"); + lt_fatal ("Memory exhausted"); return p; } @@ -4586,8 +3622,8 @@ check_executable (const char *path) { struct stat st; - lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", - nonempty (path)); + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; @@ -4604,8 +3640,8 @@ make_executable (const char *path) int rval = 0; struct stat st; - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; @@ -4631,8 +3667,8 @@ find_executable (const char *wrapper) int tmp_len; char *concat_name; - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; @@ -4685,8 +3721,7 @@ find_executable (const char *wrapper) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); + lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); @@ -4711,8 +3746,7 @@ find_executable (const char *wrapper) } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); + lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); @@ -4738,9 +3772,8 @@ chase_symlinks (const char *pathspec) int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) @@ -4762,9 +3795,8 @@ chase_symlinks (const char *pathspec) } else { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); } } XFREE (tmp_pathspec); @@ -4777,8 +3809,7 @@ chase_symlinks (const char *pathspec) tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); + lt_fatal ("Could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif @@ -4804,25 +3835,11 @@ strendzap (char *str, const char *pat) return str; } -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, +lt_error_core (int exit_status, const char *mode, const char *message, va_list ap) { - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); @@ -4831,32 +3848,20 @@ lt_error_core (int exit_status, const char *file, } void -lt_fatal (const char *file, int line, const char *message, ...) +lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - void lt_setenv (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : ""), + (value ? value : ""))); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ @@ -4901,12 +3906,95 @@ lt_extend_str (const char *orig_value, const char *add, int to_end) return new_value; } +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + void lt_update_exe_path (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); if (name && *name && value && *value) { @@ -4925,9 +4013,9 @@ lt_update_exe_path (const char *name, const char *value) void lt_update_lib_path (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); if (name && *name && value && *value) { @@ -5057,38 +4145,9 @@ prepare_spawn (char **argv) EOF ;; esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -n -e ' -s/^\(.\{79\}\)\(..*\)/\1\ -\2/ -h -s/\([\\"]\)/\\\1/g -s/$/\\n/ -s/\([^\n]*\).*/ fputs ("\1", f);/p -g -D' - cat <<"EOF" -} -EOF } # end: func_emit_cwrapperexe_src -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $opt_debug - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - # func_mode_link arg... func_mode_link () { @@ -5133,7 +4192,6 @@ func_mode_link () new_inherited_linker_flags= avoid_version=no - bindir= dlfiles= dlprefiles= dlself=no @@ -5226,11 +4284,6 @@ func_mode_link () esac case $prev in - bindir) - bindir="$arg" - prev= - continue - ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -5262,9 +4315,9 @@ func_mode_link () ;; *) if test "$prev" = dlfiles; then - func_append dlfiles " $arg" + dlfiles="$dlfiles $arg" else - func_append dlprefiles " $arg" + dlprefiles="$dlprefiles $arg" fi prev= continue @@ -5288,7 +4341,7 @@ func_mode_link () *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ;; esac ;; @@ -5307,7 +4360,7 @@ func_mode_link () moreargs= for fil in `cat "$save_arg"` do -# func_append moreargs " $fil" +# moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. @@ -5336,7 +4389,7 @@ func_mode_link () if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" + dlfiles="$dlfiles $pic_object" prev= continue else @@ -5348,7 +4401,7 @@ func_mode_link () # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - func_append dlprefiles " $pic_object" + dlprefiles="$dlprefiles $pic_object" prev= fi @@ -5418,12 +4471,12 @@ func_mode_link () if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; - *) func_append rpath " $arg" ;; + *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; - *) func_append xrpath " $arg" ;; + *) xrpath="$xrpath $arg" ;; esac fi prev= @@ -5435,28 +4488,28 @@ func_mode_link () continue ;; weak) - func_append weak_libs " $arg" + weak_libs="$weak_libs $arg" prev= continue ;; xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) - func_append compiler_flags " $qarg" + compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" @@ -5492,11 +4545,6 @@ func_mode_link () continue ;; - -bindir) - prev=bindir - continue - ;; - -dlopen) prev=dlfiles continue @@ -5547,16 +4595,15 @@ func_mode_link () ;; -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -5568,30 +4615,24 @@ func_mode_link () ;; esac case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; + *" -L$dir "*) ;; *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; + *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; + *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac @@ -5601,7 +4642,7 @@ func_mode_link () -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; @@ -5615,7 +4656,7 @@ func_mode_link () ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" + deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -5635,7 +4676,7 @@ func_mode_link () ;; esac fi - func_append deplibs " $arg" + deplibs="$deplibs $arg" continue ;; @@ -5647,22 +4688,21 @@ func_mode_link () # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - func_append compiler_flags " $arg" + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; @@ -5729,17 +4769,13 @@ func_mode_link () # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; - *) func_append xrpath " $dir" ;; + *) xrpath="$xrpath $dir" ;; esac continue ;; @@ -5792,8 +4828,8 @@ func_mode_link () for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -5808,9 +4844,9 @@ func_mode_link () for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -5838,27 +4874,23 @@ func_mode_link () arg="$func_quote_for_eval_result" ;; - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" - func_append compiler_flags " $arg" + compiler_flags="$compiler_flags $arg" continue ;; @@ -5870,7 +4902,7 @@ func_mode_link () *.$objext) # A standard object. - func_append objs " $arg" + objs="$objs $arg" ;; *.lo) @@ -5901,7 +4933,7 @@ func_mode_link () if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" + dlfiles="$dlfiles $pic_object" prev= continue else @@ -5913,7 +4945,7 @@ func_mode_link () # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - func_append dlprefiles " $pic_object" + dlprefiles="$dlprefiles $pic_object" prev= fi @@ -5958,25 +4990,24 @@ func_mode_link () *.$libext) # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. - func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" + dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" + dlprefiles="$dlprefiles $arg" prev= else - func_append deplibs " $func_resolve_sysroot_result" + deplibs="$deplibs $arg" fi continue ;; @@ -6014,7 +5045,7 @@ func_mode_link () if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi @@ -6023,8 +5054,6 @@ func_mode_link () func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" @@ -6045,12 +5074,12 @@ func_mode_link () # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append libs " $deplib" + libs="$libs $deplib" done if test "$linkmode" = lib; then @@ -6063,9 +5092,9 @@ func_mode_link () if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac - func_append pre_post_deps " $pre_post_dep" + pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= @@ -6132,19 +5161,17 @@ func_mode_link () for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= - func_resolve_sysroot "$lib" case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; + *.la) func_source "$lib" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` case " $weak_libs " in *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; + *) deplibs="$deplibs $deplib" ;; esac done done @@ -6160,17 +5187,16 @@ func_mode_link () lib= found=no case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - func_append compiler_flags " $deplib" + compiler_flags="$compiler_flags $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi @@ -6255,7 +5281,7 @@ func_mode_link () if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi @@ -6268,8 +5294,7 @@ func_mode_link () test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then @@ -6283,8 +5308,7 @@ func_mode_link () finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) func_warning "\`-L' is ignored for archives/objects" @@ -6295,21 +5319,17 @@ func_mode_link () -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result + dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; - *) func_append xrpath " $dir" ;; + *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; + *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" @@ -6327,7 +5347,7 @@ func_mode_link () match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi @@ -6337,15 +5357,15 @@ func_mode_link () ;; esac if test "$valid_a_lib" != yes; then - echo + $ECHO $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." else - echo + $ECHO $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" @@ -6372,11 +5392,11 @@ func_mode_link () if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. - func_append newdlprefiles " $deplib" + newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - func_append newdlfiles " $deplib" + newdlfiles="$newdlfiles $deplib" fi fi continue @@ -6418,20 +5438,20 @@ func_mode_link () # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; esac done fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then @@ -6442,20 +5462,20 @@ func_mode_link () func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $deplib" + tmp_libs="$tmp_libs $deplib" done continue fi # $pass = conv @@ -6463,15 +5483,9 @@ func_mode_link () # Get the name of the library we link against. linklib= - if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib="$l" - done - fi + for l in $old_library $library_names; do + linklib="$l" + done if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi @@ -6488,9 +5502,9 @@ func_mode_link () # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" + dlprefiles="$dlprefiles $lib $dependency_libs" else - func_append newdlfiles " $lib" + newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen @@ -6512,14 +5526,14 @@ func_mode_link () # Find the relevant object directory and library name. if test "X$installed" = Xyes; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" + dir="$libdir" + absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else @@ -6527,12 +5541,12 @@ func_mode_link () dir="$ladir" absdir="$abs_ladir" # Remove this search path later - func_append notinst_path " $abs_ladir" + notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later - func_append notinst_path " $abs_ladir" + notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" @@ -6543,46 +5557,20 @@ func_mode_link () if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi - case "$host" in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi fi # $pass = dlpreopen if test -z "$libdir"; then @@ -6600,7 +5588,7 @@ func_mode_link () if test "$linkmode" = prog && test "$pass" != link; then - func_append newlib_search_path " $ladir" + newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no @@ -6613,8 +5601,7 @@ func_mode_link () for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; esac # Need to link against all dependency_libs? @@ -6625,12 +5612,12 @@ func_mode_link () # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $deplib" + tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... @@ -6645,7 +5632,7 @@ func_mode_link () # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; + *) temp_rpath="$temp_rpath$absdir:" ;; esac fi @@ -6657,7 +5644,7 @@ func_mode_link () *) case "$compile_rpath " in *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; + *) compile_rpath="$compile_rpath $absdir" esac ;; esac @@ -6666,7 +5653,7 @@ func_mode_link () *) case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac @@ -6691,12 +5678,12 @@ func_mode_link () case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" + notinst_deplibs="$notinst_deplibs $lib" need_relink=no ;; *) if test "$installed" = no; then - func_append notinst_deplibs " $lib" + notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi ;; @@ -6713,7 +5700,7 @@ func_mode_link () fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - echo + $ECHO if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else @@ -6731,7 +5718,7 @@ func_mode_link () *) case "$compile_rpath " in *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; + *) compile_rpath="$compile_rpath $absdir" esac ;; esac @@ -6740,7 +5727,7 @@ func_mode_link () *) case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac @@ -6794,7 +5781,7 @@ func_mode_link () linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$opt_mode" != relink; then + if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= @@ -6816,9 +5803,9 @@ func_mode_link () if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" else add="$dir/$old_library" fi @@ -6845,12 +5832,12 @@ func_mode_link () test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then - add_dir="-L$absdir" + add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" + add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi @@ -6872,7 +5859,7 @@ func_mode_link () if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then @@ -6886,13 +5873,13 @@ func_mode_link () test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi - if test "$linkmode" = prog || test "$opt_mode" = relink; then + if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= @@ -6906,7 +5893,7 @@ func_mode_link () elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then @@ -6923,7 +5910,7 @@ func_mode_link () if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" + add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi @@ -6958,21 +5945,21 @@ func_mode_link () # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - echo + $ECHO $ECHO "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -7000,46 +5987,37 @@ func_mode_link () temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; + *) xrpath="$xrpath $temp_xrpath";; esac;; - *) func_append temp_deplibs " $libdir";; + *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi - func_append newlib_search_path " $absdir" + newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $func_resolve_sysroot_result" + tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do - path= case $deplib in -L*) path="$deplib" ;; *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." - dir=$func_dirname_result + dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; @@ -7066,8 +6044,8 @@ func_mode_link () if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi @@ -7100,7 +6078,7 @@ func_mode_link () compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" @@ -7117,7 +6095,7 @@ func_mode_link () for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; + *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= @@ -7175,10 +6153,10 @@ func_mode_link () -L*) case " $tmp_libs " in *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; + *) tmp_libs="$tmp_libs $deplib" ;; esac ;; - *) func_append tmp_libs " $deplib" ;; + *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" @@ -7194,7 +6172,7 @@ func_mode_link () ;; esac if test -n "$i" ; then - func_append tmp_libs " $i" + tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs @@ -7235,7 +6213,7 @@ func_mode_link () # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" - func_append objs "$old_deplibs" + objs="$objs$old_deplibs" ;; lib) @@ -7268,10 +6246,10 @@ func_mode_link () if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - echo + $ECHO $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" + libobjs="$libobjs $objs" fi fi @@ -7330,14 +6308,13 @@ func_mode_link () # which has an extra 1 added just for fun # case $version_type in - # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; - freebsd-aout|freebsd-elf|qnx|sunos) + freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" @@ -7447,7 +6424,7 @@ func_mode_link () versuffix="$major.$revision" ;; - linux) # correct to gnu/linux during the next big refactor + linux) func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" @@ -7470,7 +6447,7 @@ func_mode_link () done # Make executables depend on our current version. - func_append verstring ":${current}.0" + verstring="$verstring:${current}.0" ;; qnx) @@ -7538,10 +6515,10 @@ func_mode_link () fi func_generate_dlsyms "$libname" "$libname" "yes" - func_append libobjs " $symfileobj" + libobjs="$libobjs $symfileobj" test "X$libobjs" = "X " && libobjs= - if test "$opt_mode" != relink; then + if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -7557,7 +6534,7 @@ func_mode_link () continue fi fi - func_append removelist " $p" + removelist="$removelist $p" ;; *) ;; esac @@ -7568,28 +6545,27 @@ func_mode_link () # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - func_append oldlibs " $output_objdir/$libname.$libext" + oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" + temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then @@ -7603,7 +6579,7 @@ func_mode_link () for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; + *) dlfiles="$dlfiles $lib" ;; esac done @@ -7613,19 +6589,19 @@ func_mode_link () for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; + *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" + deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -7642,7 +6618,7 @@ func_mode_link () *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then - func_append deplibs " -lc" + deplibs="$deplibs -lc" fi ;; esac @@ -7691,7 +6667,7 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" i="" ;; esac @@ -7702,21 +6678,21 @@ EOF set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which I believe you do not have" - echo "*** because a test_compile did reveal that the linker did not use it for" - echo "*** its dynamic dependency list that programs get resolved with at runtime." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which I believe you do not have" + $ECHO "*** because a test_compile did reveal that the linker did not use it for" + $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." fi fi ;; *) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" ;; esac done @@ -7734,7 +6710,7 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" i="" ;; esac @@ -7745,29 +6721,29 @@ EOF set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because a test_compile did reveal that the linker did not use this one" - echo "*** as a dynamic dependency that programs can get resolved with at runtime." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because a test_compile did reveal that the linker did not use this one" + $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." + $ECHO "*** make it link in! You will probably need to install it or some" + $ECHO "*** library that it depends on before this library will be fully" + $ECHO "*** functional. Installing it before continuing would be even better." fi ;; *) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" ;; esac done @@ -7784,27 +6760,15 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` - if test -n "$file_magic_glob"; then - libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` - else - libnameglob=$libname - fi - test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - if test "$want_nocaseglob" = yes; then - shopt -s nocaseglob - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | @@ -7821,13 +6785,13 @@ EOF potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi @@ -7836,12 +6800,12 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else @@ -7852,7 +6816,7 @@ EOF ;; *) # Add a -L argument. - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. @@ -7868,7 +6832,7 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac @@ -7879,9 +6843,9 @@ EOF potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi @@ -7890,12 +6854,12 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else @@ -7906,32 +6870,32 @@ EOF ;; *) # Add a -L argument. - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi - case $tmp_deplibs in - *[!\ \ ]*) - echo + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else - echo "*** Warning: inter-library dependencies are not known to be supported." + $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi - echo "*** All declared inter-library dependencies are being dropped." + $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes - ;; - esac + fi ;; esac versuffix=$versuffix_save @@ -7943,23 +6907,23 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -7969,16 +6933,16 @@ EOF build_libtool_libs=no fi else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -7995,9 +6959,9 @@ EOF # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -8010,7 +6974,7 @@ EOF *) case " $deplibs " in *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; + new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac @@ -8020,10 +6984,10 @@ EOF -L*) case " $new_libs " in *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" @@ -8035,22 +6999,15 @@ EOF # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then - # Remove ${wl} instances when linking with ld. - # FIXME: should test the right _cmds variable. - case $archive_cmds in - *\$LD\ *) wl= ;; - esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else @@ -8059,18 +7016,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" + dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; + *) perm_rpath="$perm_rpath $libdir" ;; esac fi done @@ -8078,13 +7035,17 @@ EOF if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi @@ -8092,7 +7053,7 @@ EOF fi shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -8118,18 +7079,18 @@ EOF linknames= for link do - func_append linknames " $link" + linknames="$linknames $link" done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" - func_append delfiles " $export_symbols" + delfiles="$delfiles $export_symbols" fi orig_export_symbols= @@ -8160,45 +7121,13 @@ EOF $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' - for cmd1 in $cmds; do + for cmd in $cmds; do IFS="$save_ifs" - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test "$try_normal_branch" = yes \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=${output_objdir}/${output_la}.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. @@ -8220,7 +7149,7 @@ EOF if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then @@ -8232,7 +7161,7 @@ EOF # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -8242,7 +7171,7 @@ EOF case " $convenience " in *" $test_deplib "*) ;; *) - func_append tmp_deplibs " $test_deplib" + tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done @@ -8262,21 +7191,21 @@ EOF test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" + libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" + linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then + if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi @@ -8321,8 +7250,7 @@ EOF save_libobjs=$libobjs fi save_output=$output - func_basename "$output" - output_la=$func_basename_result + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. @@ -8335,16 +7263,13 @@ EOF if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output + $ECHO 'INPUT (' > $output for obj in $save_libobjs do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output + $ECHO "$obj" >> $output done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result + $ECHO ')' >> $output + delfiles="$delfiles $output" elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" @@ -8358,12 +7283,10 @@ EOF fi for obj do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output + $ECHO "$obj" >> $output done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." @@ -8387,19 +7310,17 @@ EOF # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext - objlist=" $obj" + objlist=$obj func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result @@ -8409,12 +7330,11 @@ EOF # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi - func_append delfiles " $output" + delfiles="$delfiles $output" else output= @@ -8448,7 +7368,7 @@ EOF lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8469,7 +7389,7 @@ EOF if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then @@ -8481,7 +7401,7 @@ EOF # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -8522,10 +7442,10 @@ EOF # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" + libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi @@ -8541,7 +7461,7 @@ EOF lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8553,7 +7473,7 @@ EOF IFS="$save_ifs" # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -8634,21 +7554,18 @@ EOF if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi - # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' @@ -8708,8 +7625,8 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac @@ -8720,14 +7637,14 @@ EOF if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -8741,7 +7658,7 @@ EOF *) case " $compile_deplibs " in *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; + new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac @@ -8751,17 +7668,17 @@ EOF -L*) case " $new_libs " in *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. @@ -8769,7 +7686,7 @@ EOF # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi @@ -8788,18 +7705,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" + rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; + *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in @@ -8808,12 +7725,12 @@ EOF case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; + *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; + *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac @@ -8839,18 +7756,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" + rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done @@ -8864,8 +7781,8 @@ EOF if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" @@ -8877,15 +7794,15 @@ EOF wrappers_required=yes case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no - ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no @@ -8894,19 +7811,13 @@ EOF esac if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' @@ -8929,7 +7840,7 @@ EOF # We should set the runpath_var. rpath= for dir in $perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -8937,7 +7848,7 @@ EOF # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -8947,18 +7858,11 @@ EOF # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - exit $EXIT_SUCCESS fi @@ -8973,7 +7877,7 @@ EOF if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -8985,19 +7889,13 @@ EOF fi # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - # Now create the wrapper script. func_verbose "creating $output" @@ -9015,7 +7913,18 @@ EOF fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. @@ -9095,7 +8004,7 @@ EOF else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" + oldobjs="$oldobjs $symfileobj" fi fi addlibs="$old_convenience" @@ -9103,10 +8012,10 @@ EOF if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" + oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. @@ -9117,10 +8026,10 @@ EOF # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" + oldobjs="$oldobjs $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have @@ -9136,9 +8045,9 @@ EOF done | sort | sort -uc >/dev/null 2>&1); then : else - echo "copying selected object files to avoid basename conflicts..." + $ECHO "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= @@ -9162,30 +8071,18 @@ EOF esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" ;; - *) func_append oldobjs " $obj" ;; + *) oldobjs="$oldobjs $obj" ;; esac done fi - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." @@ -9259,7 +8156,7 @@ EOF done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi @@ -9279,23 +8176,12 @@ EOF *.la) func_basename "$deplib" name="$func_basename_result" - func_resolve_sysroot "$deplib" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" + newdependency_libs="$newdependency_libs $libdir/$name" ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" @@ -9309,9 +8195,9 @@ EOF eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + newdlfiles="$newdlfiles $libdir/$name" ;; - *) func_append newdlfiles " $lib" ;; + *) newdlfiles="$newdlfiles $lib" ;; esac done dlfiles="$newdlfiles" @@ -9328,7 +8214,7 @@ EOF eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + newdlprefiles="$newdlprefiles $libdir/$name" ;; esac done @@ -9340,7 +8226,7 @@ EOF [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - func_append newdlfiles " $abs" + newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= @@ -9349,33 +8235,15 @@ EOF [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - func_append newdlprefiles " $abs" + newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $ECHO > $output "\ # $outputname - a libtool library file @@ -9434,7 +8302,7 @@ relink_command=\"$relink_command\"" exit $EXIT_SUCCESS } -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && +{ test "$mode" = link || test "$mode" = relink; } && func_mode_link ${1+"$@"} @@ -9454,9 +8322,9 @@ func_mode_uninstall () for arg do case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; esac done @@ -9465,23 +8333,24 @@ func_mode_uninstall () rmdirs= + origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then - odir="$objdir" + objdir="$origobjdir" else - odir="$dir/$objdir" + objdir="$dir/$origobjdir" fi func_basename "$file" name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" + test "$mode" = uninstall && objdir="$dir" - # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; esac fi @@ -9507,17 +8376,18 @@ func_mode_uninstall () # Delete the libtool libraries and symlinks. for n in $library_names; do - func_append rmfiles " $odir/$n" + rmfiles="$rmfiles $objdir/$n" done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - case "$opt_mode" in + case "$mode" in clean) - case " $library_names " in + case " $library_names " in + # " " in the beginning catches empty $dlname *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then @@ -9545,19 +8415,19 @@ func_mode_uninstall () # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then - func_append rmfiles " $dir/$pic_object" + rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then - func_append rmfiles " $dir/$non_pic_object" + rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) - if test "$opt_mode" = clean ; then + if test "$mode" = clean ; then noexename=$name case $file in *.exe) @@ -9567,7 +8437,7 @@ func_mode_uninstall () noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe - func_append rmfiles " $file" + rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. @@ -9576,7 +8446,7 @@ func_mode_uninstall () func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename @@ -9584,12 +8454,12 @@ func_mode_uninstall () # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" + rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" + rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi @@ -9597,6 +8467,7 @@ func_mode_uninstall () esac func_show_eval "$RM $rmfiles" 'exit_status=1' done + objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do @@ -9608,16 +8479,16 @@ func_mode_uninstall () exit $exit_status } -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && +{ test "$mode" = uninstall || test "$mode" = clean; } && func_mode_uninstall ${1+"$@"} -test -z "$opt_mode" && { +test -z "$mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" -- cgit v1.2.3