From 1079962e4c06f88a54e50d997c1b7e84303d30b4 Mon Sep 17 00:00:00 2001 From: Bernhard Schmidt Date: Sat, 15 Aug 2020 21:29:50 +0200 Subject: New upstream version 2.5~beta1 --- doc/Makefile.in | 662 -------------------------------------------------------- 1 file changed, 662 deletions(-) delete mode 100644 doc/Makefile.in (limited to 'doc/Makefile.in') diff --git a/doc/Makefile.in b/doc/Makefile.in deleted file mode 100644 index 6c86ac8..0000000 --- a/doc/Makefile.in +++ /dev/null @@ -1,662 +0,0 @@ -# Makefile.in generated by automake 1.16.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2018 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -# OpenVPN -- An application to securely tunnel IP networks -# over a single UDP port, with support for SSL/TLS-based -# session authentication and key exchange, -# packet encryption, packet authentication, and -# packet compression. -# -# Copyright (C) 2002-2018 OpenVPN Inc -# Copyright (C) 2006-2012 Alon Bar-Lev -# - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@WIN32_TRUE@am__append_1 = openvpn.8 -subdir = doc -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \ - $(top_srcdir)/m4/ax_socklen_t.m4 \ - $(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \ - $(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_doc_DATA) \ - $(am__dist_noinst_DATA_DIST) $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/include/openvpn-plugin.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man8dir = $(mandir)/man8 -am__installdirs = "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" \ - "$(DESTDIR)$(htmldir)" -NROFF = nroff -MANS = $(dist_man_MANS) -am__dist_noinst_DATA_DIST = README.plugins \ - interactive-service-notes.rst openvpn.8 -DATA = $(dist_doc_DATA) $(dist_noinst_DATA) $(nodist_html_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CMAKE = @CMAKE@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DL_LIBS = @DL_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GIT = @GIT@ -GREP = @GREP@ -IFCONFIG = @IFCONFIG@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -IPROUTE = @IPROUTE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBPAM_CFLAGS = @LIBPAM_CFLAGS@ -LIBPAM_LIBS = @LIBPAM_LIBS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -LZ4_CFLAGS = @LZ4_CFLAGS@ -LZ4_LIBS = @LZ4_LIBS@ -LZO_CFLAGS = @LZO_CFLAGS@ -LZO_LIBS = @LZO_LIBS@ -MAKEINFO = @MAKEINFO@ -MAN2HTML = @MAN2HTML@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MBEDTLS_CFLAGS = @MBEDTLS_CFLAGS@ -MBEDTLS_LIBS = @MBEDTLS_LIBS@ -MKDIR_P = @MKDIR_P@ -NETSTAT = @NETSTAT@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ -OPENSSL_LIBS = @OPENSSL_LIBS@ -OPENVPN_VERSION_MAJOR = @OPENVPN_VERSION_MAJOR@ -OPENVPN_VERSION_MINOR = @OPENVPN_VERSION_MINOR@ -OPENVPN_VERSION_PATCH = @OPENVPN_VERSION_PATCH@ -OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@ -OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@ -OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@ -OPTIONAL_INOTIFY_CFLAGS = @OPTIONAL_INOTIFY_CFLAGS@ -OPTIONAL_INOTIFY_LIBS = @OPTIONAL_INOTIFY_LIBS@ -OPTIONAL_LZ4_CFLAGS = @OPTIONAL_LZ4_CFLAGS@ -OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@ -OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@ -OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@ -OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@ -OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@ -OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@ -OPTIONAL_SYSTEMD_LIBS = @OPTIONAL_SYSTEMD_LIBS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -P11KIT_CFLAGS = @P11KIT_CFLAGS@ -P11KIT_LIBS = @P11KIT_LIBS@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@ -PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -PLUGINDIR = @PLUGINDIR@ -PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@ -PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@ -RANLIB = @RANLIB@ -RC = @RC@ -ROUTE = @ROUTE@ -SED = @SED@ -SELINUX_LIBS = @SELINUX_LIBS@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SOCKETS_LIBS = @SOCKETS_LIBS@ -STRIP = @STRIP@ -SYSTEMD_ASK_PASSWORD = @SYSTEMD_ASK_PASSWORD@ -SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@ -TAP_CFLAGS = @TAP_CFLAGS@ -TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@ -TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@ -TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@ -TEST_CFLAGS = @TEST_CFLAGS@ -TEST_LDFLAGS = @TEST_LDFLAGS@ -TMPFILES_DIR = @TMPFILES_DIR@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -libsystemd_CFLAGS = @libsystemd_CFLAGS@ -libsystemd_LIBS = @libsystemd_LIBS@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -plugindir = @plugindir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sampledir = @sampledir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -systemdunitdir = @systemdunitdir@ -target_alias = @target_alias@ -tmpfilesdir = @tmpfilesdir@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = \ - $(srcdir)/Makefile.in - -CLEANFILES = openvpn.8.html -dist_doc_DATA = \ - management-notes.txt - -dist_noinst_DATA = README.plugins interactive-service-notes.rst \ - $(am__append_1) -@WIN32_TRUE@nodist_html_DATA = openvpn.8.html -@WIN32_FALSE@dist_man_MANS = openvpn.8 -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-man8: $(dist_man_MANS) - @$(NORMAL_INSTALL) - @list1=''; \ - list2='$(dist_man_MANS)'; \ - test -n "$(man8dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.8[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ - done; } - -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man8dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.8[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) -install-dist_docDATA: $(dist_doc_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ - done - -uninstall-dist_docDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) -install-nodist_htmlDATA: $(nodist_html_DATA) - @$(NORMAL_INSTALL) - @list='$(nodist_html_DATA)'; test -n "$(htmldir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ - done - -uninstall-nodist_htmlDATA: - @$(NORMAL_UNINSTALL) - @list='$(nodist_html_DATA)'; test -n "$(htmldir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) distdir-am - -distdir-am: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(MANS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_docDATA install-man \ - install-nodist_htmlDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man8 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_docDATA uninstall-man \ - uninstall-nodist_htmlDATA - -uninstall-man: uninstall-man8 - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_docDATA install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-man8 \ - install-nodist_htmlDATA install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags-am uninstall uninstall-am uninstall-dist_docDATA \ - uninstall-man uninstall-man8 uninstall-nodist_htmlDATA - -.PRECIOUS: Makefile - -@WIN32_TRUE@openvpn.8.html: $(srcdir)/openvpn.8 -@WIN32_TRUE@ $(MAN2HTML) < $(srcdir)/openvpn.8 > openvpn.8.html - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: -- cgit v1.2.3 From 57f0b7b331088e489e93ae89ee0aed98381d8806 Mon Sep 17 00:00:00 2001 From: Bernhard Schmidt Date: Tue, 1 Sep 2020 16:53:26 +0200 Subject: New upstream version 2.5~beta3 --- doc/Makefile.in | 899 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 899 insertions(+) create mode 100644 doc/Makefile.in (limited to 'doc/Makefile.in') diff --git a/doc/Makefile.in b/doc/Makefile.in new file mode 100644 index 0000000..beabdc0 --- /dev/null +++ b/doc/Makefile.in @@ -0,0 +1,899 @@ +# Makefile.in generated by automake 1.16.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# OpenVPN -- An application to securely tunnel IP networks +# over a single UDP port, with support for SSL/TLS-based +# session authentication and key exchange, +# packet encryption, packet authentication, and +# packet compression. +# +# Copyright (C) 2002-2020 OpenVPN Inc +# Copyright (C) 2006-2012 Alon Bar-Lev +# + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@HAVE_PYDOCUTILS_TRUE@am__append_1 = openvpn.8 +subdir = doc +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \ + $(top_srcdir)/m4/ax_socklen_t.m4 \ + $(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \ + $(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(dist_doc_DATA) \ + $(am__dist_html_DATA_DIST) $(am__dist_noinst_DATA_DIST) \ + $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h \ + $(top_builddir)/include/openvpn-plugin.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man8dir = $(mandir)/man8 +am__installdirs = "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" \ + "$(DESTDIR)$(htmldir)" +NROFF = nroff +MANS = $(dist_man_MANS) +am__dist_html_DATA_DIST = openvpn.8.html +am__dist_noinst_DATA_DIST = README.plugins \ + interactive-service-notes.rst openvpn.8.rst \ + man-sections/advanced-options.rst \ + man-sections/client-options.rst \ + man-sections/connection-profiles.rst \ + man-sections/encryption-options.rst man-sections/examples.rst \ + man-sections/generic-options.rst man-sections/inline-files.rst \ + man-sections/link-options.rst man-sections/log-options.rst \ + man-sections/management-options.rst \ + man-sections/network-config.rst \ + man-sections/pkcs11-options.rst \ + man-sections/plugin-options.rst \ + man-sections/protocol-options.rst \ + man-sections/proxy-options.rst man-sections/renegotiation.rst \ + man-sections/signals.rst man-sections/script-options.rst \ + man-sections/server-options.rst man-sections/tls-options.rst \ + man-sections/unsupported-options.rst \ + man-sections/virtual-routing-and-forwarding.rst \ + man-sections/vpn-network-options.rst \ + man-sections/windows-options.rst openvpn.8 +DATA = $(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CMOCKA_CFLAGS = @CMOCKA_CFLAGS@ +CMOCKA_LIBS = @CMOCKA_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DL_LIBS = @DL_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_UNITTESTS = @ENABLE_UNITTESTS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GIT = @GIT@ +GREP = @GREP@ +IFCONFIG = @IFCONFIG@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +IPROUTE = @IPROUTE@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBPAM_CFLAGS = @LIBPAM_CFLAGS@ +LIBPAM_LIBS = @LIBPAM_LIBS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +LZ4_CFLAGS = @LZ4_CFLAGS@ +LZ4_LIBS = @LZ4_LIBS@ +LZO_CFLAGS = @LZO_CFLAGS@ +LZO_LIBS = @LZO_LIBS@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MBEDTLS_CFLAGS = @MBEDTLS_CFLAGS@ +MBEDTLS_LIBS = @MBEDTLS_LIBS@ +MKDIR_P = @MKDIR_P@ +NETSTAT = @NETSTAT@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ +OPENSSL_LIBS = @OPENSSL_LIBS@ +OPENVPN_VERSION_MAJOR = @OPENVPN_VERSION_MAJOR@ +OPENVPN_VERSION_MINOR = @OPENVPN_VERSION_MINOR@ +OPENVPN_VERSION_PATCH = @OPENVPN_VERSION_PATCH@ +OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@ +OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@ +OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@ +OPTIONAL_INOTIFY_CFLAGS = @OPTIONAL_INOTIFY_CFLAGS@ +OPTIONAL_INOTIFY_LIBS = @OPTIONAL_INOTIFY_LIBS@ +OPTIONAL_LZ4_CFLAGS = @OPTIONAL_LZ4_CFLAGS@ +OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@ +OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@ +OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@ +OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@ +OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@ +OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@ +OPTIONAL_SYSTEMD_LIBS = @OPTIONAL_SYSTEMD_LIBS@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +P11KIT_CFLAGS = @P11KIT_CFLAGS@ +P11KIT_LIBS = @P11KIT_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@ +PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PLUGINDIR = @PLUGINDIR@ +PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@ +PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@ +RANLIB = @RANLIB@ +RC = @RC@ +ROUTE = @ROUTE@ +RST2HTML = @RST2HTML@ +RST2MAN = @RST2MAN@ +SED = @SED@ +SELINUX_LIBS = @SELINUX_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SOCKETS_LIBS = @SOCKETS_LIBS@ +STRIP = @STRIP@ +SYSTEMD_ASK_PASSWORD = @SYSTEMD_ASK_PASSWORD@ +SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@ +TAP_CFLAGS = @TAP_CFLAGS@ +TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@ +TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@ +TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@ +TEST_CFLAGS = @TEST_CFLAGS@ +TEST_LDFLAGS = @TEST_LDFLAGS@ +TMPFILES_DIR = @TMPFILES_DIR@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +libsystemd_CFLAGS = @libsystemd_CFLAGS@ +libsystemd_LIBS = @libsystemd_LIBS@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +plugindir = @plugindir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sampledir = @sampledir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +systemdunitdir = @systemdunitdir@ +target_alias = @target_alias@ +tmpfilesdir = @tmpfilesdir@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +MAINTAINERCLEANFILES = \ + $(srcdir)/Makefile.in + +SUBDIRS = doxygen +dist_doc_DATA = \ + management-notes.txt + +dist_noinst_DATA = README.plugins interactive-service-notes.rst \ + openvpn.8.rst man-sections/advanced-options.rst \ + man-sections/client-options.rst \ + man-sections/connection-profiles.rst \ + man-sections/encryption-options.rst man-sections/examples.rst \ + man-sections/generic-options.rst man-sections/inline-files.rst \ + man-sections/link-options.rst man-sections/log-options.rst \ + man-sections/management-options.rst \ + man-sections/network-config.rst \ + man-sections/pkcs11-options.rst \ + man-sections/plugin-options.rst \ + man-sections/protocol-options.rst \ + man-sections/proxy-options.rst man-sections/renegotiation.rst \ + man-sections/signals.rst man-sections/script-options.rst \ + man-sections/server-options.rst man-sections/tls-options.rst \ + man-sections/unsupported-options.rst \ + man-sections/virtual-routing-and-forwarding.rst \ + man-sections/vpn-network-options.rst \ + man-sections/windows-options.rst $(am__append_1) +@HAVE_PYDOCUTILS_TRUE@dist_html_DATA = openvpn.8.html + +# Failsafe - do not delete these files unless we can recreate them +@HAVE_PYDOCUTILS_TRUE@CLEANFILES = \ +@HAVE_PYDOCUTILS_TRUE@ openvpn.8 openvpn.8.html + +@HAVE_PYDOCUTILS_TRUE@@WIN32_FALSE@dist_man_MANS = openvpn.8 +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man8: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man8dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.8[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ + done; } + +uninstall-man8: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man8dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.8[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) +install-dist_docDATA: $(dist_doc_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ + done + +uninstall-dist_docDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) +install-dist_htmlDATA: $(dist_html_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ + done + +uninstall-dist_htmlDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook +check-am: all-am +check: check-recursive +all-am: Makefile $(MANS) $(DATA) +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-dist_docDATA install-dist_htmlDATA \ + install-man + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: install-man8 + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-dist_docDATA uninstall-dist_htmlDATA \ + uninstall-man + +uninstall-man: uninstall-man8 + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic clean-libtool cscopelist-am ctags \ + ctags-am dist-hook distclean distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dist_docDATA install-dist_htmlDATA \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-man8 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-dist_docDATA uninstall-dist_htmlDATA \ + uninstall-man uninstall-man8 + +.PRECIOUS: Makefile + + +openvpn.8 : +@HAVE_PYDOCUTILS_TRUE@ $(RST2MAN) $(srcdir)/$@.rst > $@ +@HAVE_PYDOCUTILS_FALSE@ @echo "Missing python-docutils - skipping man page generation" + +openvpn.8.html: +@HAVE_PYDOCUTILS_TRUE@ $(RST2HTML) $(srcdir)/openvpn.8.rst > $@ +@HAVE_PYDOCUTILS_FALSE@ @echo "Missing python-docutils - skipping man/html page generation" + +dist-hook : openvpn.8 openvpn.8.html + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -- cgit v1.2.3 From 4ee98f284a93c3b855092d35ac21371d9dcad65b Mon Sep 17 00:00:00 2001 From: Bernhard Schmidt Date: Wed, 24 Feb 2021 19:54:12 +0100 Subject: New upstream version 2.5.1 --- doc/Makefile.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'doc/Makefile.in') diff --git a/doc/Makefile.in b/doc/Makefile.in index beabdc0..3d1c968 100644 --- a/doc/Makefile.in +++ b/doc/Makefile.in @@ -441,7 +441,7 @@ MAINTAINERCLEANFILES = \ SUBDIRS = doxygen dist_doc_DATA = \ - management-notes.txt + management-notes.txt gui-notes.txt dist_noinst_DATA = README.plugins interactive-service-notes.rst \ openvpn.8.rst man-sections/advanced-options.rst \ @@ -468,7 +468,7 @@ dist_noinst_DATA = README.plugins interactive-service-notes.rst \ @HAVE_PYDOCUTILS_TRUE@CLEANFILES = \ @HAVE_PYDOCUTILS_TRUE@ openvpn.8 openvpn.8.html -@HAVE_PYDOCUTILS_TRUE@@WIN32_FALSE@dist_man_MANS = openvpn.8 +@WIN32_FALSE@dist_man_MANS = openvpn.8 all: all-recursive .SUFFIXES: -- cgit v1.2.3 From f2b3dda12a731c2e0971cb7889728edaf23f6cb0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 29 Nov 2021 20:46:00 +0100 Subject: New upstream version 2.5.4 --- doc/Makefile.in | 128 ++++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 93 insertions(+), 35 deletions(-) (limited to 'doc/Makefile.in') diff --git a/doc/Makefile.in b/doc/Makefile.in index 3d1c968..ef41a37 100644 --- a/doc/Makefile.in +++ b/doc/Makefile.in @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.16.1 from Makefile.am. +# Makefile.in generated by automake 1.16.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2018 Free Software Foundation, Inc. +# Copyright (C) 1994-2020 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -21,7 +21,7 @@ # packet encryption, packet authentication, and # packet compression. # -# Copyright (C) 2002-2020 OpenVPN Inc +# Copyright (C) 2002-2021 OpenVPN Inc # Copyright (C) 2006-2012 Alon Bar-Lev # @@ -99,7 +99,7 @@ PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ -@HAVE_PYDOCUTILS_TRUE@am__append_1 = openvpn.8 +@HAVE_PYDOCUTILS_TRUE@am__append_1 = $(build_man_pages) subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \ @@ -173,15 +173,16 @@ am__uninstall_files_from_dir = { \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } +man5dir = $(mandir)/man5 +am__installdirs = "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)" \ + "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)" man8dir = $(mandir)/man8 -am__installdirs = "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" \ - "$(DESTDIR)$(htmldir)" NROFF = nroff MANS = $(dist_man_MANS) -am__dist_html_DATA_DIST = openvpn.8.html +am__dist_html_DATA_DIST = openvpn.8.html openvpn-examples.5.html am__dist_noinst_DATA_DIST = README.plugins \ interactive-service-notes.rst openvpn.8.rst \ - man-sections/advanced-options.rst \ + openvpn-examples.5.rst man-sections/advanced-options.rst \ man-sections/client-options.rst \ man-sections/connection-profiles.rst \ man-sections/encryption-options.rst man-sections/examples.rst \ @@ -198,7 +199,7 @@ am__dist_noinst_DATA_DIST = README.plugins \ man-sections/unsupported-options.rst \ man-sections/virtual-routing-and-forwarding.rst \ man-sections/vpn-network-options.rst \ - man-sections/windows-options.rst openvpn.8 + man-sections/windows-options.rst openvpn.8 openvpn-examples.5 DATA = $(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive @@ -425,6 +426,7 @@ plugindir = @plugindir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sampledir = @sampledir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ @@ -436,15 +438,22 @@ tmpfilesdir = @tmpfilesdir@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = \ - $(srcdir)/Makefile.in - SUBDIRS = doxygen + +# +# List of man and HTML pages we build when rst2man/rst2html is available +# +# NOTE: Remember to add source .rst files to $(dist_noinst_DATA) below +# This could be automated with GNU Make, but we need BSD Make support +# +build_man_pages = openvpn.8 openvpn-examples.5 +build_html_pages = openvpn.8.html openvpn-examples.5.html dist_doc_DATA = \ management-notes.txt gui-notes.txt dist_noinst_DATA = README.plugins interactive-service-notes.rst \ - openvpn.8.rst man-sections/advanced-options.rst \ + openvpn.8.rst openvpn-examples.5.rst \ + man-sections/advanced-options.rst \ man-sections/client-options.rst \ man-sections/connection-profiles.rst \ man-sections/encryption-options.rst man-sections/examples.rst \ @@ -462,16 +471,21 @@ dist_noinst_DATA = README.plugins interactive-service-notes.rst \ man-sections/virtual-routing-and-forwarding.rst \ man-sections/vpn-network-options.rst \ man-sections/windows-options.rst $(am__append_1) -@HAVE_PYDOCUTILS_TRUE@dist_html_DATA = openvpn.8.html -# Failsafe - do not delete these files unless we can recreate them -@HAVE_PYDOCUTILS_TRUE@CLEANFILES = \ -@HAVE_PYDOCUTILS_TRUE@ openvpn.8 openvpn.8.html +###### GENERIC RULES ########## +SUFFIXES = .8.rst .8 .8.html .5.rst .5 .5.html +MAINTAINERCLEANFILES = \ + $(srcdir)/Makefile.in + +@HAVE_PYDOCUTILS_TRUE@dist_html_DATA = $(build_html_pages) -@WIN32_FALSE@dist_man_MANS = openvpn.8 +# Failsafe - do not delete these files unless we can recreate them +@HAVE_PYDOCUTILS_TRUE@CLEANFILES = $(build_man_pages) $(build_html_pages) +@WIN32_FALSE@dist_man_MANS = $(build_man_pages) all: all-recursive .SUFFIXES: +.SUFFIXES: .8.rst .8 .8.html .5.rst .5 .5.html $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -507,6 +521,49 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs +install-man5: $(dist_man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(dist_man_MANS)'; \ + test -n "$(man5dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.5[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ + done; } + +uninstall-man5: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man5dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.5[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) install-man8: $(dist_man_MANS) @$(NORMAL_INSTALL) @list1=''; \ @@ -758,7 +815,7 @@ check: check-recursive all-am: Makefile $(MANS) $(DATA) installdirs: installdirs-recursive installdirs-am: - for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)"; do \ + for dir in "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive @@ -830,7 +887,7 @@ install-info: install-info-recursive install-info-am: -install-man: install-man8 +install-man: install-man5 install-man8 install-pdf: install-pdf-recursive @@ -861,7 +918,7 @@ ps-am: uninstall-am: uninstall-dist_docDATA uninstall-dist_htmlDATA \ uninstall-man -uninstall-man: uninstall-man8 +uninstall-man: uninstall-man5 uninstall-man8 .MAKE: $(am__recursive_targets) install-am install-strip @@ -873,26 +930,27 @@ uninstall-man: uninstall-man8 install-data-am install-dist_docDATA install-dist_htmlDATA \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ - install-man install-man8 install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-dist_docDATA uninstall-dist_htmlDATA \ - uninstall-man uninstall-man8 + install-man install-man5 install-man8 install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-am uninstall uninstall-am uninstall-dist_docDATA \ + uninstall-dist_htmlDATA uninstall-man uninstall-man5 \ + uninstall-man8 .PRECIOUS: Makefile -openvpn.8 : -@HAVE_PYDOCUTILS_TRUE@ $(RST2MAN) $(srcdir)/$@.rst > $@ -@HAVE_PYDOCUTILS_FALSE@ @echo "Missing python-docutils - skipping man page generation" +.8.rst.8 .5.rst.5 : +@HAVE_PYDOCUTILS_TRUE@ $(RST2MAN) $< > $@ +@HAVE_PYDOCUTILS_FALSE@ @echo "Missing python-docutils - skipping man page generation ($@)" -openvpn.8.html: -@HAVE_PYDOCUTILS_TRUE@ $(RST2HTML) $(srcdir)/openvpn.8.rst > $@ -@HAVE_PYDOCUTILS_FALSE@ @echo "Missing python-docutils - skipping man/html page generation" +.8.rst.8.html .5.rst.5.html : +@HAVE_PYDOCUTILS_TRUE@ $(RST2HTML) $< > $@ +@HAVE_PYDOCUTILS_FALSE@ @echo "Missing python-docutils - skipping html page generation ($@)" -dist-hook : openvpn.8 openvpn.8.html +dist-hook : $(build_man_pages) $(build_html_pages) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. -- cgit v1.2.3