New upstream version 1.2.1upstream/1.2.1

6 files changed, 4 insertions, 652 deletions

diff --git a/doc/plustek/FAQ b/doc/plustek/FAQ
index 92a4e72..089fc6d 100644
--- a/doc/plustek/FAQ
+++ b/doc/plustek/FAQ
@@ -12,111 +12,10 @@ If you have some more FAQ entries, let me know <gerhard@gjaeger.de>
 THANKS to Jochen <jochen@puchalla-online.de>, who roamed through the
 mailing-list and gathered the different questions.
 
-
 *******************************************************************************
-*                           TROUBLE-SHOOTING                                  *
-*                                                                             *
-*                             DRIVER TOPICS                                   *
+*                                 General                                     *
 *******************************************************************************
 
-
-SYMPTOM: "kernel-module version mismatch"
---------
-"When I try to "make load" I get an error"
-
-/sbin/modprobe pt_drv || exit 1
-/lib/modules/2.2.14-6.0.6/misc/pt_drv.o: kernel-module version mismatch
-/lib/modules/2.2.14-6.0.1/misc/pt_drv.o was compiled
-for kernel version 2.2.14-5.0
-while this kernel is version 2.2.14-6.0.1.
-
-PROBLEM:
---------
-You're using the wrong Kernel-header files.
-
-The path
-/usr/include/linux is a link to
-/usr/src/linux/include/linux and
-/usr/src/linux is normally a link to your current
-kernel, i.e:
-/usr/src/linux-2.2.14
-
-If you now upgrade your kernel and you have
-forgotten to correct the link /usr/src/linux, then
-every kernel-module you build outside the
-kernelsource structure will include the wrong
-version information.
-
-SOLUTION:
----------
-Set the link /usr/src/linux
-to your current kernel-source tree before recompiling
-kernel-modules like pt_drv, then your version mismatch
-problem should be solved.
-
-
-
-SYMPTOM: "Device or resource busy"
---------
-Any attempt to "modprobe" or "make load" the driver leads
-to this message.
-
-PROBLEM:
---------
-The driver refuses to load. During startup, the driver performs
-some tests according to the parallel port and the connected
-scanners.
-If the parallel port is not supported or the scanner cannot be
-found, the driver returns an error and the system will report
-"device or resource busy"
-
-SOLUTION:
----------
-There's no way to provide a general solution. First of all
-you should check your connections and the parallel port.
-Also check power for your scanner.
-If the problem still exists, enable the debug-messages of the
-pt_drv module (see INSTALL).
-Then check the messages after loading or send the output to
-the mailing list.
-Most of these problems are related to HW-problems. Before
-giving up, check the scanner under Windows (not really a
-good advice I know, but it helps to find HW-damage).
-There was also one case were the internal plugs of the parport
-connection were wrong...
-
-
-
-SYMPTOM: "Unresolved symbols"
---------
-"make load" or "modprobe pt_drv" produces this message:
-
-/sbin/modprobe pt_drv || exit 1
-/lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_unregister_device
-/lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_enumerate
-/lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_register_device
-/lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_claim
-/lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_release
-/lib/modules/2.2.14-5.0/misc/pt_drv.o: insmod
-/lib/modules/2.2.14-5.0/misc/pt_drv.o failed
-
-
-PROBLEM:
---------
-The driver needs at least the parport_pc and the parport modules
-to work. They MUST be loaded prior to pt_drv. If these modules
-are not loaded you get this message.
-
-SOLUTION:
----------
-Simply load the parport module. You can add this dependency to
-your /etc/modules.conf (or /etc/conf.modules) file (see INSTALL).
-Then every time you load pt_drv with modprobe, parport will be loaded
-automatically. After modifying this file, call
-depmod -va
-
-
-
 SYMPTOM: Scanner makes awful noise
 --------
 
@@ -138,7 +37,6 @@ The second case is often reported when the printer driver lp.o is
 already loaded. So remove lp.o before loading pt_drv.
 
 
-
 SYMPTOM: Printer starts to print while scanning
 --------
 
@@ -294,23 +192,6 @@ A:  You should be able to use xscanimage with gimp:
     now the Acquire Image menu entry. That's all.
     If not, start gimp from an xterm and have a look at the output.
 
-
-Q:  Is there any way to load the plustek_driver at bootup-time?
-
-A:  Normally, there is no need to do so, because once you
-    altered your /etc/conf.modules file (or /etc/modules.conf)
-    and added the suggested stuff (see INSTALL file), you won't
-    have to worry about loading the driver. It happens automagically. ;-)
-    The driver will be loaded when needed (and eventually
-    removed after a specific time of not using it).
-
-    Nevertheless, another possibility is to do a modprobe pt_drv in the
-    /etc/rc.d/boot.local (using SuSE) or
-    /etc/rc.d/rc.local (using RedHat or Mandrake) file
-    So the driver will be loaded at bootup-time...
-    !!! YOUR SCANNER MUST BE ONLINE during power-up then !!!
-
-
 Q:  I wonder if Mandrake 7.1's sane rpm file has this support already built in.
     My scanner light is coming on yet Xscanimage seems to report that there
     is no scanner present.
diff --git a/doc/plustek/MakeModule.sh b/doc/plustek/MakeModule.sh
deleted file mode 100644
index b684f0d..0000000
--- a/doc/plustek/MakeModule.sh
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/bash
-#******************************************************************************
-#
-# Bash-Script to create Plustek-Scannerdriver modules for Kernel 2.4, 2.6 and 3.x
-# out of the backend sources...
-#
-
-BUILD_DIR=$PWD/build
-SRC_DIR=$PWD/../../backend
-MAKEFILE=$PWD/Makefile.kernel26
-KERNEL_V=`uname -r`
-OSMINOR=`uname -r | cut -b 3`
-OSMAJOR=`uname -r | cut -b 1`
-
-#
-# some intro ;-)
-#
-echo "This script will try and build a suitable kernel-module for your system."
-echo "If you'd like to make the module WITH debug output, restart this script"
-echo "with as follows:"
-echo "./MakeModule.sh DEBUG=y"
-echo "Press <ENTER> to continue or <CTRL><C> to cancel."
-read
-
-#
-# we need to be root user...
-#
-echo -n "Check for root..."
-if [ $EUID -ne 0 ]; then
-	echo -e "\b\b\b - failed"
-	echo "Please retry as root user."
-	exit -1
-fi
-echo -e "\b\b\b - done."
-
-#
-# Version checks...
-#
-echo -e "\nCheck for kernelversion:"
-if [ "$OSMAJOR" == "3" ];then
-	echo "Using makefile for kernel 2.6.x - okay for kernel 3 as well..."
-	MAKEFILE=$PWD/Makefile.kernel26
-elif [ "$OSMINOR" == "6" ]; then
-	echo "Using makefile for kernel 2.6.x"
-	MAKEFILE=$PWD/Makefile.kernel26
-elif [ "$OSMINOR" == "4" ]; then
-	echo "Using makefile for kernel 2.4.x"
-	MAKEFILE=$PWD/Makefile.kernel24
-else
-	echo "Your kernelversion >"$OSMAJOR"."$OSMINOR"< is probably not supported"
-	exit -2
-fi
-
-#
-# Setup...
-#
-echo -e "Build-directory: \n"$BUILD_DIR
-echo -n "Removing build-directory..."
-rm -rf $BUILD_DIR
-echo -e "\b\b\b - done."
-
-echo -n "Creating build-directory..."
-mkdir $BUILD_DIR
-cd $BUILD_DIR
-echo -e "\b\b\b - done.\n"
-
-echo -n "Linking source files..."
-C_FILES=`ls $SRC_DIR/plustek-pp_*.c`
-H_FILES=`ls $SRC_DIR/plustek-pp_*.h`
-
-for F in $C_FILES $H_FILES $SRC_DIR/plustek-pp.h $SRC_DIR/plustek_pp.c; do
-	ln -s $F .
-done
-echo -e "\b\b\b - done."
-
-echo -n "Copying Makefile to build-directory..."
-cp $MAKEFILE Makefile
-echo -e "\b\b\b - done."
-
-#
-# Building the module...
-#
-echo "Making the module..."
-if [ "$OSMAJOR" == "2" -a "$OSMINOR" == "4" ]; then
-	make all $1
-else
-	make -C /lib/modules/$KERNEL_V/build/ SUBDIRS=$BUILD_DIR modules $1
-fi
-RES=$?
-cd ..
-if [ $RES != 0 ]; then
-	echo "There were some build errors..."
-	exit -1
-fi
-echo "done."
-
-echo "Should I install the module?"
-echo "Press <ENTER> to continue or <CTRL><C> to cancel."
-read
-
-make -C $BUILD_DIR install
-
-echo "Should I try and load the module?"
-echo "If this step fails, check the kernel-log."
-echo "Press <ENTER> to continue or <CTRL><C> to cancel."
-read
-
-make -C $BUILD_DIR load
-echo "done."
-
-echo "Should I remove the build directory?"
-echo "Press <ENTER> to continue or <CTRL><C> to cancel."
-read
-
-rm -rf $BUILD_DIR
-echo "done."
diff --git a/doc/plustek/Makefile.kernel24 b/doc/plustek/Makefile.kernel24
deleted file mode 100644
index 28677c1..0000000
--- a/doc/plustek/Makefile.kernel24
+++ /dev/null
@@ -1,250 +0,0 @@
-# Makefile for the plustek scanner driver (kernel-module)
-#
-###############################################################################
-#
-# define the directories
-#
-HOME_DIR := .
-SRC_DIR  := $(HOME_DIR)
-INC_DIR  := $(SRC_DIR)
-OBJ_DIR  := $(HOME_DIR)/obj
-DOC_DIR  := $(HOME_DIR)/doc
-BACKEND  := $(SRC_DIR)
-
-#
-# define the used tools
-#
-MD  = mkdir -p
-CC  = gcc
-TAR = tar
-REF = cxref
-
-#
-# Comment/uncomment the following line to disable/enable debugging
-# can also be set by commandline parameter: make all DEBUG=y
-#
-#DEBUG = y
-
-#
-# common compiler options
-#
-OPT = -fomit-frame-pointer -D_PTDRV_VERSTR=\"$(VERSIONSTR)\"
-
-#
-# cxref options
-#
-REFOPT = -xref-all -index-all -html32
-
-#
-# Comment out if you are not running SMP. Someone take this out of here
-# when the SMP stuff gets moved out of the kernel Makefile.
-# SMP = 1
-# SMP_PROF = 1
-
-#
-# add the following to get assembly listing
-# -Wa,-alh,-L -g
-
-#
-# get some version numbers
-#
-ifeq ($(LINUXVERSION),)
- LINUXVERSION = $(shell uname -r)
-endif
-
-VERSIONSTR = $(shell grep "define BACKEND_VERSION" $(SRC_DIR)/plustek_pp.c | cut -b25-50 )
-
-# Change it here or specify it on the "make" commandline
-ifeq ($(HEADER_PATH),)
-MACHTYPE = $(shell env | grep debian-linux | wc -l | sed 's/ //g')
-ifeq ($(MACHTYPE),1)
-#  debian
-  HEADER_PATH = /usr/src/kernel-headers-$(LINUXVERSION)/include
-else
-#  redhat, slackware
-  HEADER_PATH = /usr/src/linux/include
-endif
-#   HEADER_PATH = /usr/include
-endif
-
-ifeq ($(DEBUG),y)
-  DEBFLAGS = -O -g -DDEBUG # "-O" is needed to expand inlines
-else
-  DEBFLAGS = -O2
-endif
-
-#
-# the new style reference
-#
-K24_HEADER_PATH = /lib/modules/$(LINUXVERSION)/build/include
-
-#
-# try to autodetect if we can use the new style header include references
-#
-KERNEL_HEADERS = $(shell if test -d $(K24_HEADER_PATH); then \
-							echo $(K24_HEADER_PATH); 		 \
-				 	     else 								 \
-							echo $(HEADER_PATH); 			 \
-					     fi; )
-
-#
-# seems to be necessary for kernels 2.4.x
-#
-MODVERFILE = $(shell if [ -e $(KERNEL_HEADERS)/linux/modversions.h ]; then \
-						echo $(KERNEL_HEADERS)/linux/modversions.h ;	   \
-					 else											       \
-						echo $(KERNEL_HEADERS)/linux/modsetver.h ;		   \
-					 fi )
-
-MODFLAGS = -DMODULE
-
-#
-# set MODVERSIONS if the kernel uses it
-#
-VERSUSED = $(shell grep 'define CONFIG_MODVERSIONS' \
-                   $(KERNEL_HEADERS)/linux/autoconf.h | wc -l | sed 's/ //g')
-ifeq ($(VERSUSED),1)
-  MODFLAGS += -DMODVERSIONS -include $(MODVERFILE)
-endif
-
-
-WARNFLAGS = -Wall -Wstrict-prototypes
-CFLAGS    = $(WARNFLAGS) $(OPT) -D__KERNEL__ -I$(KERNEL_HEADERS) -I$(INC_DIR) -I$(BACKEND) $(DEBFLAGS) $(MODFLAGS)
-MODLIB    = /lib/modules/$(LINUXVERSION)
-
-ifdef SMP
-CFLAGS += -D__SMP__
-
-ifdef SMP_PROF
-CFLAGS += -D__SMP_PROF__
-endif
-endif
-
-TARGET = pt_drv
-
-OBJ  = $(TARGET).o
-NAMES := dac detect genericio image map misc models io procfs
-NAMES := $(NAMES) motor p9636 ptdrv scale tpa p48xx p12 p12ccd
-NAMES := $(addprefix plustek-pp_, $(NAMES))
-SRCS  := $(addprefix $(SRC_DIR)/, $(NAMES))
-SRCS  := $(addsuffix .c, $(SRCS))
-OBJS  := $(addprefix $(OBJ_DIR)/, $(NAMES))
-OBJS  := $(addsuffix .o, $(OBJS))
-INCS  := scan dbg types scandata procs hwdefs sysdep
-INCS  := $(addsuffix .h, $(INCS))
-HDRS  = $(addprefix $(INC_DIR)/plustek-pp_, $(INCS))
-
-#
-# the header files we need from the backend
-#
-BACKINCS := plustek-pp.h
-BACKINCS := $(addprefix $(BACKEND)/, $(BACKINCS))
-
-group = "root"
-mode  = "644"
-INST_DIR = /lib/modules/$(LINUXVERSION)/kernel/drivers/char
-
-info:
-	@clear
-	@echo "Makefile to create the Plustek-Scanner kernel-module:"
-	@echo "all          ... builds the module"
-	@echo "all DEBUG=y  ... builds the module with debug-messages enabled"
-	@echo "clean        ... cleans up the show"
-	@echo "install      ... installs the module to the library path"
-	@echo "uninstall    ... removes the module from the library path"
-	@echo "load         ... tries to load the module and creates device nodes"
-	@echo "unload       ... unloads the module"
-
-
-all: .depend chkdir $(OBJ)
-
-#
-# create object directory
-#
-.PHONY : chkdir
-chkdir:
-	@-$(MD) $(OBJ_DIR)
-	@-$(MD) $(DOC_DIR)
-
-$(OBJ): $(OBJS)
-	$(LD) -r $^ -o $@
-
-$(OBJS): Makefile $(HDRS) $(BACKINCS)
-
-$(OBJ_DIR)/%.o : $(SRC_DIR)/%.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-$(OBJ_DIR)/$(OBJ): VERSION1 VERSION0
-
-#
-# copy the driver to the modules directory
-#
-install:
-	mkdir -p $(INST_DIR)
-	install -c -m $(mode) $(OBJ) $(INST_DIR)
-	/sbin/depmod -a
-
-#
-# remove it
-#
-uninstall:
-	rm -f $(INST_DIR)/$(OBJ)
-
-#
-# use modprobe to load the driver, remember to set the
-# parameter in /etc/modules.conf (see sane-plustek_pp.man for more details)
-#
-load:   $(INST_DIR)/$(OBJ)
-# invoke modprobe with all arguments we got
-	/sbin/modprobe $(TARGET) || exit 1
-
-# Remove stale nodes and replace them, then give gid and perms
-	rm -f /dev/$(TARGET)*
-
-# when using the devfs support, we check the /dev/scanner entries
-# and only create links to the devfs nodes
-# at least we create one link
-	@if [ -e /dev/scanner/$(TARGET)* ]; then 				\
-		ln -s /dev/scanner/$(TARGET)0 /dev/$(TARGET);		\
-		for name in `ls /dev/scanner | grep $(TARGET)`; do	\
-			ln -s /dev/scanner/$$name /dev/$$name ;     	\
-		done												\
-	else                      								\
-		mknod /dev/$(TARGET) c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 0;  \
-		mknod /dev/$(TARGET)0 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 0;	\
-		mknod /dev/$(TARGET)1 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 1;	\
-		mknod /dev/$(TARGET)2 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 2; \
-		mknod /dev/$(TARGET)3 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 3;	\
-																							\
-		chgrp $(group) /dev/$(TARGET)*;	\
-		chmod $(mode)  /dev/$(TARGET)*;	\
-	fi
-
-#
-# unload the driver
-#
-unload:
-	/sbin/modprobe -r $(TARGET) || exit 1
-
-# Remove stale nodes
-	rm -f /dev/$(TARGET)*
-
-#
-# create reference docu
-#
-doc: chkdir
-	$(REF) $(REFOPT) $(INC_DIR)/*.h $(SRC_DIR)/*.c $(BACKEND)/plustek-share.h \
-    -D__KERNEL__ -I$(KERNEL_HEADERS) -I$(INC_DIR) -I$(BACKEND) $(MODFLAGS) \
-    -D_PTDRV_V1=$(VERSION1) -D_PTDRV_V0=$(VERSION0) -D_PTDRV_BUILD=$(BUILD) -O$(DOC_DIR)
-
-clean:
-	@-rm -f $(OBJ_DIR)/*.o .depend depend dep $(REF).* *.html $(TARGET).o
-	@-rm -rf $(OBJ_DIR)
-	@-rm -rf $(DOC_DIR)
-
-depend .depend dep:
-	$(CC) $(CFLAGS) -M $(SRCS) > $@
-
-ifeq (.depend,$(wildcard .depend))
-#include .depend
-endif
diff --git a/doc/plustek/Makefile.kernel26 b/doc/plustek/Makefile.kernel26
deleted file mode 100644
index 43a71ad..0000000
--- a/doc/plustek/Makefile.kernel26
+++ /dev/null
@@ -1,124 +0,0 @@
-# Makefile for the plustek scanner driver (kernel-module)
-#
-###############################################################################
-
-#
-# retrieve the version numbers
-#
-ifeq ($(LINUXVERSION),)
- LINUXVERSION = $(shell uname -r)
-endif
-LINUXRELEASE = $(shell uname -r | cut -d'.' -f3)
-
-ifeq ($(VERSIONSTR),)
- ifeq ($(SUBDIRS),)
-  VERSIONSTR = $(shell grep "define BACKEND_VERSION" $(M)/plustek_pp.c | cut -b25-50 )
- else
-  VERSIONSTR = $(shell grep "define BACKEND_VERSION" $(SUBDIRS)/plustek_pp.c | cut -b25-50 )
- endif
-endif
-
-#
-# extra flags
-#
-EXTRA_CFLAGS += -D_PTDRV_VERSTR=\"$(VERSIONSTR)\"
-
-ifeq ($(DEBUG),y)
-	EXTRA_CFLAGS += -DDEBUG
-endif
-
-#
-# the module name
-#
-TARGET := pt_drv
-MODULE := $(TARGET).ko
-
-#
-# our files...
-#
-NAMES := dac detect genericio image map misc models io procfs
-NAMES := $(NAMES) motor p9636 ptdrv scale tpa p48xx p12 p12ccd
-NAMES := $(addprefix plustek-pp_, $(NAMES))
-OBJS  := $(addsuffix .o, $(NAMES))
-
-#
-# now the kernel magic
-#
-ifneq ($(KERNELRELEASE),)
-obj-m := $(TARGET).o
-
-$(TARGET)-objs := $(OBJS)
-
-else
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD  := $(shell pwd)
-
-default:
-	$(MAKE) -C $(KDIR) M=$(PWD) modules
-endif
-
-#
-# the installation stuff
-#
-group = "root"
-mode  = "644"
-INST_DIR = /lib/modules/$(LINUXVERSION)/kernel/drivers/parport
-
-#
-# copy the driver to the modules directory
-#
-install:
-	mkdir -p $(INST_DIR)
-	install -c -m $(mode) $(MODULE) $(INST_DIR)
-	/sbin/depmod -a
-
-#
-#
-#
-uninstall:
-	rm -f $(INST_DIR)/$(MODULE)
-
-#
-# use modprobe to load the driver, remember to set the
-# parameter in /etc/conf.modules (see INSTALL for more details)
-#
-load:   $(INST_DIR)/$(MODULE)
-# invoke modprobe with all arguments we got
-	/sbin/modprobe $(TARGET) || exit 1
-
-# Remove stale nodes and replace them, then give gid and perms
-	rm -f /dev/$(TARGET)*
-
-# when using the devfs support, we check the /dev/scanner entries
-# and only create links to the devfs nodes
-# at least we create one link
-	@if [ -e /dev/scanner/$(TARGET)* ]; then 				\
-		ln -s /dev/scanner/$(TARGET)0 /dev/$(TARGET);		\
-		for name in `ls /dev/scanner | grep $(TARGET)`; do	\
-			ln -s /dev/scanner/$$name /dev/$$name ;     	\
-		done												\
-	else                      								\
-		mknod /dev/$(TARGET) c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 0;  \
-		mknod /dev/$(TARGET)0 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 0;	\
-		mknod /dev/$(TARGET)1 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 1;	\
-		mknod /dev/$(TARGET)2 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 2; \
-		mknod /dev/$(TARGET)3 c `cat /proc/devices | sed -ne "s/\([0-9]*\) pt_drv/\1/p"` 3;	\
-																							\
-		chgrp $(group) /dev/$(TARGET)*;	\
-		chmod $(mode)  /dev/$(TARGET)*;	\
-	fi
-
-#
-# unload the driver
-#
-unload:
-	/sbin/modprobe -r $(TARGET) || exit 1
-
-# Remove stale nodes
-	rm -f /dev/$(TARGET)*
-
-#
-# cleanup the show
-#
-clean:
-	@-rm -f *.o .depend depend dep $(MODULE) $(TARGET).o $(TARGET).mod.c .*.cmd
diff --git a/doc/plustek/Plustek-PARPORT.txt b/doc/plustek/Plustek-PARPORT.txt
index a181b9c..f763100 100644
--- a/doc/plustek/Plustek-PARPORT.txt
+++ b/doc/plustek/Plustek-PARPORT.txt
@@ -1,46 +1,10 @@
 Plustek-PARPRORT.txt (2004-03-28) Gerhard Jäger <gerhard@gjaeger.de>
 ====================================================================
 
-
 Beginning with SANE-1.0.13, there's a backend called plustek_pp.
 This is for controlling Plustek parallel-port scanner and compatible
 devices. For a full listing, see plustek_pp.desc.
 
-This code formerly was available for creating the Linux kernelmodule
-pt_drv. This should no longer be necessary. You should be able to use
+This code formerly was available for creating the Linux kernel module
+pt_drv. This is no longer be necessary. You should be able to use
 the backend out of the box.
-
-
-The kernel module
------------------
-
-As it might be helpful to create and use the kernel-module, this way still
-exists. It's possible to create this module out of the backend sources
-in sane-backends/backend. Simply do (as root user)
-
-./MakeModule.sh
-
-Then the module should be compiled, installed and loaded.
-
-Add the following three lines to file /etc/modules.conf
-
-alias char-major-40	pt_drv
-pre-install pt_drv modprobe -k parport
-options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0 slowIO=1
-
-See man page for sane-plustek_pp ("man sane-plustek_pp") for explanation of
-these options.
-
-Now "scanimage -L" should show something like this:
-device `plustek:/dev/pt_drv' is a Plustek 9630P flatbed scanner
-
-
-Known Problems:
----------------
-
-Sometimes it is necessary to change the ioctl-interface between the
-driver and the backend, in this case the version number of the communication
-protocol will be changed and newer drivers won't work with older backends
-and vice versa.
-In this case (error -9019 in the SANE debug output!!) you have to recompile SANE
-AND the driver (have a look at the installation procedure above).
diff --git a/doc/plustek/Plustek-USB.txt b/doc/plustek/Plustek-USB.txt
index 29989d0..208850c 100644
--- a/doc/plustek/Plustek-USB.txt
+++ b/doc/plustek/Plustek-USB.txt
@@ -4,10 +4,7 @@ Plustek-USB.txt (2005-08-08) Gerhard Jäger <gerhard@gjaeger.de>
 NOTE:
 -----
 
-ALL YOU NEED TO RUN YOUR USB SCANNER IS ALREADY INCLUDED. THERE'S
-NO NEED TO INSTALL THE KERNEL MODULE pt_drv. THIS ONE IS ONLY NEEDED
-FOR THE PLUSTEK PARALLELPORT SCANNER.
-
+ALL YOU NEED TO RUN YOUR USB SCANNER IS ALREADY INCLUDED.
 
 List of all currently implemented devices
 -----------------------------------------