New upstream version 1.3.0upstream/1.3.0upstream

1 files changed, 10 insertions, 10 deletions

diff --git a/doc/sane-matsushita.man b/doc/sane-matsushita.man
index 2030f2c..d4b0184 100644
--- a/doc/sane-matsushita.man
+++ b/doc/sane-matsushita.man
@@ -27,14 +27,14 @@ backend:
 .ft R
 .RE
 .PP
-(*) WARNING: None of the advanced options of these scanners are available (ie no color, no high resolution, no automatic cropping). Basically, the driver does no more than what it does for the KV-SS25. I don't have access to such scanners, and thus cannot add these options.
+(*) WARNING: None of the advanced options of these scanners are available (i.e. no color, no high resolution, no automatic cropping). Basically, the driver does no more than what it does for the KV-SS25. I don't have access to such scanners, and thus cannot add these options.
 
 Other Panasonic high speed scanners may or may not work with that backend.
 
-Valid command line options and their syntax can be listed by using
+Valid command line options and their syntax can be listed by using:
 .RS
 .PP
-scanimage \-\-help \-d matsushita
+.I scanimage \-\-help \-d matsushita
 .RE
 
 .TP
@@ -58,13 +58,13 @@ selects the number of pages to scan (one or until the tray is empty).
 
 .TP
 .B \-\-paper\-size A4|...|Legal|Letter [A4]
-options selects the area to scan. It adjust the
+selects the area to scan. It adjusts the
 .B \-l \-t \-x \-y
 options accordingly. It does not need to be the real size of the paper.
 
 .TP
 .B \-l \-t \-x \-y
-control the scan area: \-l sets the top left x coordinate, \-t the top
+controls the scan area: \-l sets the top left x coordinate, \-t the top
 left y coordinate, \-x selects the width and \-y the height of the scan
 area. All parameters are specified in millimeters. It is possible to use
 the option
@@ -85,28 +85,28 @@ controls the contrast of the acquired image. Some models do not support that opt
 automatically sets brightness, contrast, white level, gamma, noise reduction and image emphasis. These options are not available when automatic\-threshold is in use.
 .TP
 .B \-\-halftone\-pattern
-option sets the tonal gradation for the halftone mode. Pattern downloading is not implemented by the backend.
+sets the tonal gradation for the halftone mode. Pattern downloading is not implemented by the backend.
 .TP
 .B \-\-autoseparation
 provides automatic separation of text and images.
 .TP
 .B \-\-white\-level
-option indicate the source of the white base.
+indicates the source of the white base.
 .TP
 .B \-\-noise\-reduction
 reduces the isolated dot noise. This option is not supported by all scanners.
 .TP
 .B \-\-image\-emphasis
-option sets the image emphasis. Some selection are not available on all scanners.
+sets the image emphasis. Some selection are not available on all scanners.
 .TP
 .B \-\-gamma
-options set the gamma curve. It is only valid for Gray modes, and is not available on all scanners. Gamma downloading is not implemented by the backend.
+sets the gamma curve. It is only valid for Gray modes, and is not available on all scanners. Gamma downloading is not implemented by the backend.
 
 
 .SH CONFIGURATION FILE
 The configuration file
 .I @CONFIGDIR@/matsushita.conf
-supports the device name to use (eg
+supports the device name to use (e.g.
 .IR /dev/scanner )
 and the SCSI option to auto-detect the scanners supported.