summaryrefslogtreecommitdiff
path: root/doc/sane-mustek_pp.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2020-03-30 21:30:45 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2020-03-30 21:30:45 +0200
commitee770c2346eb37e0dcb8b6cf3eaacf3d8efd6bbc (patch)
tree58f05092be1a17a939e861f8cadcda1b6ca2ecef /doc/sane-mustek_pp.man
parent0da9e21872802cfc6e975b1ebaf9efb9e5934d84 (diff)
parentfef76e17ed4c607ea73b81279f9ef1d7121be900 (diff)
Merge branch 'release/experimental/1.0.29-1_experimental1'experimental/1.0.29-1_experimental1
Diffstat (limited to 'doc/sane-mustek_pp.man')
-rw-r--r--doc/sane-mustek_pp.man76
1 files changed, 38 insertions, 38 deletions
diff --git a/doc/sane-mustek_pp.man b/doc/sane-mustek_pp.man
index 253759d..acc2f9b 100644
--- a/doc/sane-mustek_pp.man
+++ b/doc/sane-mustek_pp.man
@@ -18,10 +18,10 @@ The
library implements a SANE (Scanner Access Now Easy) backend that
provides access to Mustek parallel port flatbed scanners and OEM versions.
-There are 2 classes of Mustek parallel port scanners: regular
+There are 2 classes of Mustek parallel port scanners: regular
.B CCD
-(cold cathode device) scanners and
-.B CIS
+(cold cathode device) scanners and
+.B CIS
(contact image sensor) scanners.
.P
The current version of this backend supports both CCD type scanners and
@@ -29,7 +29,7 @@ CIS type scanners.
.P
The following scanners might work with this backend:
-.SS "CCD scanners"
+.SS "CCD scanners"
.EX
Model: ASIC ID: CCD Type: works:
@@ -56,25 +56,25 @@ Mustek 1200 CP+ 1015 yes
.EE
.EX
-OEM versions Original works
+OEM versions Original works
--------------------------------------------------
Medion/LifeTec/Tevion
MD/LT 9350/9351 1200 CP yes
MD/LT 9850/9851 1200 CP maybe (**)
MD/LT 9858 1200 CP probably
MD/LT 9890/9891 1200 CP yes
-Targa
+Targa
Funline TS12EP 1200 CP yes
Funline TS6EP 600 CP yes
Trust
Easy Connect 9600+ 600 CP yes
-Cybercom
+Cybercom
9352 1200 CP yes (***)
.EE
-.HP
+.HP
(*) Calibration problems existed with earlier version of
this driver. They seem to be solved now.
-.HP
+.HP
(**) Problems have been reported in the past for the
MD/LT9850 type (striped scans, head moving in wrong
direction at some resolutions). It is not known whether
@@ -82,7 +82,7 @@ the current version of the driver still has these problems.
.PP
.B IF YOU HEAR LOUD CLICKING NOISES, IMMEDIATELY UNPLUG THE SCANNER !
(This holds for any type of scanner).
-.HP
+.HP
(***) Possibly, the engine_delay parameter has to be set to 1 ms
for accurate engine movements.
.PP
@@ -90,15 +90,15 @@ Please note that this backend is still under construction. Certain models
are currently not supported and some may never be because the communication
protocol is still unknown (eg., SE 12000 P).
.PP
-Some scanners work faster when
+Some scanners work faster when
.B EPP/ECP
is enabled in the BIOS. EPP mode however may lead to hard-locks on some Linux
systems. If that is the case for you, you can either disable ECP/EPP in your
BIOS or disable it in the backend itself (see GLOBAL OPTIONS).
.PP
Note that the backend needs to run as root or has to have appropriate access
-rights to /dev/parport* if libieee1284 support is compiled in. To allow user
-access to the scanner run the backend through the network interface (See
+rights to /dev/parport* if libieee1284 support is compiled in. To allow user
+access to the scanner run the backend through the network interface (See
saned(8) and sane\-net(5)). Note also that the backend
.I does not
support
@@ -112,7 +112,7 @@ to enable the backend explicitly in your dll.conf, just remove the hash mark
in the line "mustek_pp".
.SH "DEVICE DEFINITION"
-This backend allows multiple devices being defined and configured via the
+This backend allows multiple devices being defined and configured via the
.B mustek_pp.conf
file (even simultaneously, provided that they are connected to different
parallel ports). Please make sure to edit this file
@@ -134,23 +134,23 @@ for instance "LifeTec 9350".
.B <port name>
is the name of the parallel port to which the device is connected. In case
libieee1284 is used for communication with the port
-.I (default
-.IR setup) ,
-valid port names are
-.BR parport0 ,
-.BR parport1 ,
+.I (default
+.IR setup) ,
+valid port names are
+.BR parport0 ,
+.BR parport1 ,
and
.BR parport2 .
.PP
In case the backend is configured for raw IO
-.I (old
+.I (old
.IR setup) ,
port addresses have to be used instead of port names:
.BR 0x378 ,
-.BR 0x278 ,
+.BR 0x278 ,
or
.BR 0x3BC .
-The mapping of parallel ports (lp0, lp1, and lp2) to these addresses
+The mapping of parallel ports (lp0, lp1, and lp2) to these addresses
can be different for different Linux kernel versions. For instance,
if you are using a Kernel 2.2.x or better and you have only one
parallel port, this port is named lp0 regardless of the base address. However,
@@ -159,7 +159,7 @@ port your scanner is connected to, have a look at your /etc/conf.modules,
/etc/modules.conf and/or /proc/ioports.
.PP
If you are unsure which port to use, you can use the magic value
-.BR *
+.BR *
to probe for your scanner.
.PP
.HP
@@ -169,7 +169,7 @@ is the driver to use for this device. Currently available drivers are:
.BR cis600 " : for 600 CP, 96 CP & OEM versions"
.br
.BR cis1200 " : for 1200 CP & OEM versions"
-.br
+.br
.BR cis1200+ " : for 1200 CP+ & OEM versions"
.br
.BR ccd300 " : for 600 IIIE P & OEM version"
@@ -187,12 +187,12 @@ cover only half of the width of the scan area (also not dangerous).
.PP
If unsure about the exact model of your OEM version, check the optical
resolution in the manual or on the box: the 600CP has a maximum optical
-resolution of 300x600 DPI, whereas the 1200CP and 1200CP+ have a maximum
-optical resolution of 600x1200 DPI.
+resolution of 300x600 DPI, whereas the 1200CP and 1200CP+ have a maximum
+optical resolution of 600x1200 DPI.
.PP
Examples:
.PP
-.RS
+.RS
scanner "LifeTec 9350" 0x378 cis1200
.PP
scanner Mustek_600CP 0x378 cis600
@@ -201,7 +201,7 @@ scanner Mustek_600IIIEP * ccd300
.RE
If in doubt which port you have to use, or whether your scanner is
-detected at all, you can use
+detected at all, you can use
.B sane\-find\-scanner \-p
to probe all configured ports.
@@ -209,7 +209,7 @@ to probe all configured ports.
.PP
The contents of the
.B mustek_pp.conf
-file is a list of device definitions and device options that correspond to
+file is a list of device definitions and device options that correspond to
Mustek scanners. Empty lines and lines starting with a hash mark (#) are
ignored. Options have the following format:
.PP
@@ -220,19 +220,19 @@ ignored. Options have the following format:
Depending on the nature of the option, a value may or may not be present.
Options always apply to the scanner definition that precedes them. There
are no global options. Options are also driver-specific: not all drivers
-support all possible options.
+support all possible options.
.SS Common options
.TP
.B bw <value>
Black/white discrimination value to be used during lineart scanning. Pixel
values below this value are assumed to be black, values above are
-assumed to be white.
+assumed to be white.
.br
Default value: 127
-.br
+.br
Minimum: 0
-.br
+.br
Maximum: 255
.sp
Example: option bw 150
@@ -240,7 +240,7 @@ Example: option bw 150
.SS CIS driver options
.TP
.B top_adjust <value>
-Vertical adjustment of the origin, expressed in millimeter (floating point).
+Vertical adjustment of the origin, expressed in millimeter (floating point).
This option can be used to calibrate the position of the origin, within
certain limits. Note that CIS scanners are probably temperature sensitive, and
that a certain inaccuracy may be hard to avoid. Differences in offset between
@@ -261,7 +261,7 @@ scan does not start at the origin, the driver will try to move the scanhead
to the start of the scan area at the fastest possible speed. On some models,
this may not work, resulting in large inaccuracies (up to centimeters).
By setting this option, the driver is forced to use normal speed during
-skipping, which can circumvent the accuracy problems. Currently, there are
+skipping, which can circumvent the accuracy problems. Currently, there are
no models for which these inaccuracy problems are known to occur.
.sp
By default, fast skipping is used.
@@ -454,13 +454,13 @@ For additional information on the CIS driver, see
.SH AUTHORS
.nf
-Jochen Eisinger <jochen at penguin\-breeder dot org>
+Jochen Eisinger <jochen at penguin\-breeder dot org>
Eddy De Greef <eddy_de_greef at scarlet dot be>
.fi
.SH BUGS
-Too many... please send bug reports to
-.I sane\-devel@lists.alioth.debian.org
+Too many... please send bug reports to
+.I sane\-devel@alioth-lists.debian.net
(note that you have to subscribe first to the list before you can send
emails... see http://www.sane\-project.org/mailing\-lists.html)