diff options
Diffstat (limited to 'ChangeLog-1.0.17')
| -rw-r--r-- | ChangeLog-1.0.17 | 1011 |
1 files changed, 1011 insertions, 0 deletions
diff --git a/ChangeLog-1.0.17 b/ChangeLog-1.0.17 new file mode 100644 index 0000000..4cc0ed4 --- /dev/null +++ b/ChangeLog-1.0.17 @@ -0,0 +1,1011 @@ +****** Release of sane-backends 1.0.17. End of code freeze ****** + +2005-12-18 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added link to Lexmark X6170. + * doc/descriptions/gt68xx.desc: Added Trust Direct WebScan 19200 + (reported on sane-devel). + * backend/Makefile.in: Added missing genesys_conv.c and + genesys_conv_hlp.c to DISTFILES. Without this change the files + wouldn't be part of the archive. + * configure configure.in: Disabled compilation warnings. Increased + version number. + +2005-12-17 Karl Heinz Kremer <khk@khk.net> + + * doc/descriptions/epson.desc: Added a few new scanners based on + messages to the sane-devel mailing list. + +2005-12-11 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * NEWS: Updated for release. + +---- CODE FREEZE FOR SANE 1.0.17 --- + +2005-12-10 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/hp3500.desc: Added .desc file for new + external backend hp3500 which provides support for the HP ScanJet + 3500 series (from Troy Rollo <sane@troy.rollo.name>). + * doc/descriptions/unsupported.desc: Removed HP 3500, 3530, and + 3570 (now in hp3500.desc). + +2005-12-09 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/brother-mfc4600.desc: Added .desc file + for (older) external backend for Brother MFC 4600 (USB version). + * doc/descriptions/unsupported.desc: Added Lexmark X6170. Removed + Brother MFC 4600 USB. + * backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c + backend/gt68xx_low.c doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: Silenced + non-fatal warnings/error messages. Several fixes for avoiding + freezes/timeouts after cancelling a scan. Several fixes for + warming up of lamp. Decreased scan width of Plustek OpticPro + 1248U. + +2005-12-08 Gerhard Jaeger <gerhard@gjaeger.de> + + * backend/plustek-pp_tpa.c backend/u12-tpa.c: Fixed nasty + compiler warnings. + +2005-12-07 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Brother + MFC-7300c. Removed Primax Colorado 2400U (now in + primascan.desc). + * doc/descriptions-external/primascan.desc: New external backend + for Primax Colorado 2400U. + +2005-12-07 Gerhard Jaeger <gerhard@gjaeger.de> + + * sanei/sanei_acces.c: Fixed problem, when the device name contains + one or more path-separators. These characters are now converted. + The problem occurs on 2.4 based installations as well as on OpenBSD. + +2005-12-06 Stephane Voltz <stefdev@modulonet.fr> + + * backend/genesys_gl646.c: removed forgotten left-over of + an experiment . + +2005-12-06 Stephane Voltz <stefdev@modulonet.fr> + + * backend/genesys_gl646.c: added AF init in powersave, fixed + long-standing bug related to a data read timeout between + distinct scanning sessions + +2005-12-06 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/genesys.conf: Enabled Canon LiDE 60 which was disabled + for safety reasons. Bugs are fixed now. + * doc/descriptions/genesys.desc: Changed status of Canon LiDE 50 + and 60 to "good". Added comment for untested LiDE 40 to report any + success/failure. + * AUTHORS: Marked Fred Odendaal as active maintainer. + * tools/hotplug/libsane.usermap: Added Epson Perfection 3490. + +2005-12-05 Rene Rebe <rene@exactcode.de> + + * backend/avision.c backend/avision.conf doc/sane-avision.man: + fixed more typos in comments and debug output, removed obsolete + options from the parser, example avision.conf and manual page. + Fixed 12 Bit gray and color modes to actually work as well as + software CCD line-difference correction. Minimal scan resolutions + have been slightly adapted for some ASICs. + +2005-12-05 Pierre Willenbrock <pierre@pirsoft.dnsalias.org> + + * backend/genesys.c: removed usage of current_setup in functions + where it is not necessarily initialized. Modified shading + calibration to not use fixed stripe sizes. Fixed memory + corruption while calculating shading data. Fixed read sizes to + be multiples of 256. Fixed stagger/line distance + correction. Fixed line shrinking to correctly update data + buffers. Bumped BUILD number. + * backend/genesys.c backend/genesys_conv.c: Added gray to lineart + conversion. + * backend/genesys.c backend/genesys_conv_hlp.c: Modified calling + parameters to stagger/line distance correction filter to better + describe its inner working. + * backend/genesys_devices.c: Slowed down motor timings for + LiDE 35/40/50/60. Removed untested message for LiDE 35/40/50/60. + * backend/genesys_gl646.c: Fixed bug for odd pixel count. Added + support for gray to lineart conversion. + * backend/genesys_gl841.c: Fixed words_per_line calculation. Added + support for gray to lineart conversion(not used). Fixed problem + with scanners not backtracking while scanning calibration area + leading to scanning part of document area. + +2005-12-05 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c backend/snapscan-scsi.c: small bugfix for Benq5150 + +2005-12-05 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Canon PIXMA MP170. + +2005-12-04 Rene Rebe <rene@exactcode.de> + + * backend/avision.c backend/avision.h: updated the Avision backend + from BUILD 167 to 179, including support for HP 5370, AV600U, + AV210C2, AV220C2, et. al. The USB i/o paths got hardened, and a + lot of fixes as well es enhancements and optimizations where added + and a lot of typos, mostly in debug output and comments, got fixed. + The "Line Art" mode was renamed to "Lineart" to match the other + backends. + +2005-12-03 Karl Heinz Kremer <khk@khk.net> + + * backend/epson_usb.c: Added id for CX4200 + +2005-12-04 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.h backend/snapscan.c backend/snapscan-scsi.c + backend/snapscan-options.c: Some fixes for Benq 5150 + +2005-12-03 Peter Fales <peter@fales-lorenz.net> + * backend/gphoto2.c: Cosmetic changes to debug messages + +2005-12-02 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-sources.c: Another fix for lineart mode for the + Epson 3490 @ 3200 DPI - this time tested + * backend/snapscan.c: Change version number to 1.4.50 + +2005-12-01 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added link for Corex Cardscan + 500. + +2005-11-30 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added UMAX Astra 4100. + * tools/hotplug/libsane.usermap: Added Epson Stylus CX4200. + +2005-11-28 Jochen Eisinger <jochen@penguin-breeder.org> + + * sanei/sanei_pa4s2.c: incorrect test of a bit mask. + +2005-11-28 Stephane Voltz <stefdev@modulonet.fr> + + * backend/umax_pp_low.c: ifdef'ed forgottent debug statements + +2005-11-28 Stephane Voltz <stefdev@modulonet.fr> + + * backend/umax_pp_low.c: fixed 'blue tint' on scanning area border + by increasing shading coefficient on dark areas + +2005-11-26 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-sources.c: Fix lineart mode for Epson 3490 + * doc/descriptions/snapscan.desc: Update status for Benq 5000 + +2005-11-26 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-scsi.c: Fix for Benq 5000 + * backend/snapscan.conf: Replace esfw52.bin with dummy filename entry + +2005-11-25 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * backend/artec_eplus48u.conf, backend/snapscan.conf: Use default + firmware dirs in config files + * doc/sane-artec_eplus48u.man, doc/sane-snapscan.man: Use default + firmare dirs in man pages + +2005-11-25 Ulrich Deiters <ulrich.deiters@uni-koeln.de> + + * backend/canon-sane: fixed usage of an uninitialized variable + +2005-11-25 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * po/sane-backends.da.po: Updated Danish translation (from Mogens + Jaeger <mogensjaeger@get2net.dk>). + +2005-11-25 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-sources.c: Fix for grayscale / linart for Epson 3490 + at 3200 DPI + +2005-11-25 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * po/sane-backends.ru.po: Fixing some fuzzies + +2005-11-24 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * doc/gamma4scanimage.man, doc/sane-abaton.man, doc/sane-agfafocus.man, + doc/sane-apple.man, doc/sane-artec.man, doc/sane-avision.man, + doc/sane-bh.man, doc/sane-canon.man, doc/sane-canon630u.man, + doc/sane-config.man, doc/sane-coolscan.man, doc/sane-coolscan2.man, + doc/sane-dc210.man, doc/sane-dc240.man, doc/sane-dc25.man, + doc/sane-dmc.man, doc/sane-epson.man, doc/sane-find-scanner.man, + doc/sane-fujitsu.man, doc/sane-genesys.man, doc/sane-gphoto2.man, + doc/sane-gt68xx.man, doc/sane-hp.man, doc/sane-hp4200.man, + doc/sane-hp5400.man, doc/sane-ibm.man, doc/sane-leo.man, + doc/sane-lexmark.man, doc/sane-ma1509.man, doc/sane-matsushita.man, + doc/sane-microtek.man, doc/sane-microtek2.man, doc/sane-mustek.man, + doc/sane-mustek_pp.man, doc/sane-mustek_usb2.man, doc/sane-nec.man, + doc/sane-net.man, doc/sane-niash.man, doc/sane-pint.man, + doc/sane-plustek.man, doc/sane-plustek_pp.man, doc/sane-ricoh.man, + doc/sane-s9036.man, doc/sane-sceptre.man, doc/sane-sharp.man, + doc/sane-snapscan.man, doc/sane-sp15c.man, doc/sane-st400.man, + doc/sane-tamarack.man, doc/sane-teco1.man, doc/sane-teco2.man, + doc/sane-teco3.man, doc/sane-u12.man, doc/sane-umax1220u.man, + doc/sane-umax_pp.man, doc/sane-usb.man, doc/sane-v4l.man, + doc/sane.man, doc/saned.man, doc/scanimage.man: man page fixes + +2005-11-23 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-options.c: Disable bilevel colour / halftoning + for Epson 3490 + +2005-11-23 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * backend/Makefile.in: added "artec_eplus48u" to FIRMWARE_DIRS + +2005-11-22 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * po/sane-backends.sv.po: Updated Swedish translation + * sanei/sanei_scsi.c: Added some debugging. Fixed some varnings + +---- FEATURE FREEZE FOR SANE 1.0.17 --- + +2005-11-20 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/genesys.c backend/genesys_devices.c + backend/genesys.conf: Bumped build number. Changed scanner's + name to Canon LiDE 35/40/50. Added Canon LiDE LiDE 60. This scanner + is still commented out in genesys.conf. Removed comment sign for + Canon LiDE 35/40/50 in genesys.conf. + * doc/descriptions/genesys.desc: Added Canon LiDE 35, 40, 50, 60. + * doc/sane-genesys.man: Updated concerning gl841 scanners. + * doc/descriptions/unsupported.desc: Moved Canon LiDE 35/40/50/60 + to genesys.desc. Added Canon Pixma MP150, Tevion MD 90070 and + Primax Colorado 1200p. + * tools/hotplug/libsane.usermap: Added Plustek Opticslim 2400 ids + (from Jan Matousek). + * NEWS: Updated. + +2005-11-19 Pierre Willenbrock <pierre@pirsoft.dnsalias.org> + + * backend/genesys_gl841.c backend/genesys_devices.c: + Added support for Canon LiDE 35/40/50 + * backend/genesys.c backend/genesys_low.h + backend/genesys_gl646.c: Reworked data conversion + process to convert CIS data, added new slope + generation variant + * backend/genesys_conv.c backend/genesys_conv_hlp.c: + Moved conversion filter functions out of + backend/genesys.c + +2005-11-18 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-options.c: Disable 2400 DPI for + Epson 3490, use 1600 DPI instead + +2005-11-17 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-PARPORT.changes: Update. + * backend/plustek_pp.c backend/plustek-pp.h + backend/plustek-pp_ptdrv.c backend/plustek-pp_wrapper.c: + Fixed sizeof(long) issue for 64bit platforms, see + bugreport #302195. + * backend/plustek_pp.conf: Default config now only tries to + access parport using libieee1284. + +2005-11-15 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c backend/snapscan-options.c + backend/snapscan-scsi.c: Enabled quality calibration for the + Epson 3490 + * doc/descriptions/snapscan.desc: Changed status for Epson Perfection + 3490 (good) and 3590 (basic) + +2005-11-15 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added HP Scanjet 4890. Added + several Optrox scanners. + * doc/descriptions-external/brother.desc: Marked status of + MFC-9880 as "unsupported" based on a user's report. + +2005-11-13 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added IOmagic MobileScan + USB. Mentioned chips used in the Artec AM12E+. + * doc/descriptions-external/hp3770.desc + doc/descriptions-external/hp8200.desc: Added clarification + concerning status of these backends. + +2005-11-10 Oliver Schwartz <Oliver.Schwartz@gmx.de> + * backend/snapscan.c backend/snapscan-sources.c: Added + deinterlacing for Epson 3490 + * backend/Makefile.in: added "snapscan" to FIRMWARE_DIRS + +2005-11-07 m. allan noah <anoah AT pfeiffer DOT edu> + + * backend/fujitsu.c: M3091/2 lie about gamma dl capability + +2005-11-07 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/microtek2.desc: Fixed "unmaintained" + marker. Added Microtek Scanmaker V6UPL (bug #302464). + * tools/check-usb-chip.c: Added detection of rts8822l-01h chipset + (patch from Jonathan Bravo Lopez <JKD@JKDSoft.cjb.net>). + +2005-11-06 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/epkowa.desc: Disabled man page link + (points to nowhere). Bug #302463. + * doc/descriptions/unsupported.desc: Added Canon PIXMA MP130. + * doc/sane-hp.man doc/sane-microtek2.man: Fixed links to ppscsi. + +2005-11-02 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * sanei/sanei_usb.c: Fixed output of transfer buffer for + usb_read_bulk in OS/2. + * backend/snapscan.c backend/snapscan-scsi.c: Fixes for Benq 5000 + * backend/snapscan-usb.c: Avoid recursive calls of usb_sense_handler + +2005-11-01 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * sanei/sanei_usb.c: Added support for detecting vendor and + product id with FreeBSD kernel scanner driver (based on patch in + FreeBSD ports). + * README.freebsd: Updated information about USB scanners. + +2005-10-31 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c backend/snapscan-scsi.c backend/snapscan.h + backend/snapscan-options.c doc/descriptions/snapscan.desc: + Distinguish between 5000/5000E/5000U + * backend/snapscan-sources.c: Enable deinterlacer for 5000E/5000U + for 1200 DPI + * backend/snapscan.conf: Fix names for 5000/5000E/5000U + +2005-10-30 Giuseppe Sacco <eppesuig@debian.org> + + * po/*it.po: Updated italian translation + +2005-10-29 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/artec_eplus48u.conf + doc/descriptions/artec_eplus48u.desc: Added support for Trust + 240H Easy Webscan Gold to artec_eplus48u backend. + * Makefile.in acinclude.m4 configure configure.in + backend/Makefile.in frontend/Makefile.in lib/Makefile.in + sanei/Makefile.in tools/Makefile.in: + Run "makedepend" if it's available. This way "make" builds + backends correctly even if only included files (e.g. headers) are + changed. Don't be too verbose when running makedepend. + Create links libsane-*.so.1 to the real library files if the + links are not there. This fixes dynamic loading on OpenBSD. The + links are not created for MacOS X as they don't work there. + Remove any libsane.* links in /usr/local/lib/sane. Such links + are created by libtool. As they point to libsane-v4l.so, + scanimage -L doesn't find any scanner in case of ld.so + misconfigurations. + The install target is much quiter now and prints the libtool + message only once now. + * README.openbsd: Removed comment about broken library links. + +2005-10-28 Gerhard Jaeger <gerhard@gjaeger.de> + + * po/*.po: Updated po files, corrected/updated german translation. + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek.c backend/plustek.h: Added OPTION_SPEEDUP. + * backend/plustek-usbdevs.c: Changed high-speed setting for + UMAX 3400, due to bugreport #302317. + Fixed CanoScan N650U settings (bugreport #302433). + +2005-10-25 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek.c: Bumped build number. + * backend/plustek-usbdevs.c: Tweaked LiDE25 settings. + * backend/plustek-usb.c: Let CIS devices use green-channel + for gray scans. + * backend/plustek-usbcal.c: Fixed segfault condition in fine + calibration for gray scanmodes. + +2005-10-24 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c backend/snapscan-scsi.c backend/snapscan.h + backend/snapscan-options.c: Fix transparency range for Epson + 2480/2580, fix preview for Epson 2580. + +2005-10-24 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/umax1220u.desc: Marked backend as + unmaintained. Used non-broken link. + +2005-10-23 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c backend/snapscan-scsi.c: Fixes for buffer + size in high-res modes by Simon Munton, small changes to delay + code. + +2005-10-23 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * tools/hotplug/libsane.usermap: Added Epson Stylus DX3850 (from + niels_kalle <niels_kalle@web.de>). + +2005-10-22 Eddy De Greef <eddy_de_greef at tiscali dot be> + + * backend/mustek_pp_cis.c: Decreased the maximum number of pixels + on a line for CIS scanners a bit to avoid border artifacts. + +2005-10-22 Eddy De Greef <eddy_de_greef at tiscali dot be> + + * backend/mustek_pp_cis.c backend/mustek_pp_cis.h + doc/sane-mustek_pp.man: Added an optional engine_delay parameter + to work around potential engine instability problems for CIS models. + +2005-10-21 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek.c: Bumped build number. + * backend/plustek-usbdevs.c: Fixed high-speed feature of + Canoscan D660U. + +2005-10-20 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-scsi.c: Fixes for 16 bit + quality calibration by Simon Munton + +2005-10-18 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added HP ScanJet 7650 and + UMAX Astra 2500. + * doc/descriptions-external/brother2.desc: MFC-210C is reported to + work. + * NEWS: Created entry for sane-backends 1.0.17. + +2005-10-17 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * acinclude.m4 configure: Fixed check for libpthread functions. + * tools/hotplug/libsane.usermap: Added Brother MFC 210C (from + Benjamin Mirza <bm1607@yahoo.de>). + * doc/descriptions-external/epkowa.desc: Updated for iscan 1.17.0 + (patch from Olaf Meeuwissen <olaf@member.fsf.org>). Bug #302183. + +2005-10-16 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * AUTHORS: Marked Michael Herder as not active. No activity since + some time, most email addresses bounce, no response to + pings. Changed contact address to the only one that doesn't + directly bounce. + * backend/artec_eplus48u.conf: Added support for UMAX AstraSlim + 1200 SE (from Harq al-Ada <nadaban.bogdan at gmail.com>). + * doc/descriptions/artec_eplus48u.desc: UMAX AstraSlim + 1200 SE is supported. Backend is unmaintained. + * doc/descriptions/unsupported.desc: Added HP ScanJet + 4850C. Removed UMAX AstraSlim 1200 SE. + * backend/gt68xx.c backend/gt68xx_generic.c + doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Minor + modifications to sheet-fed scanner support. + * backend/mustek_usb2.c backend/mustek_usb2.h + backend/mustek_usb2_asic.c backend/mustek_usb2_asic.h + backend/mustek_usb2_high.c backend/mustek_usb2_high.h + backend/mustek_usb2_reflective.c backend/mustek_usb2_transparent.c + doc/descriptions/mustek_usb2.desc + doc/mustek_usb2/mustek_usb2.CHANGES: + Removed typedefs for DWORD, WORD and so on. Used int, unsigned + short, ... directly in the code. + * AUTHORS configure configure.in backend/Makefile.in + backend/dll.conf backend/lexmark-x1100.c backend/lexmark.c + backend/lexmark.conf backend/lexmark.h doc/Makefile.in + doc/sane-lexmark.man tools/hotplug/libsane.usermap: Added lexmark + backend (from Fred Odendaal <freshshelf@rogers.com>). + * frontend/tstbackend.c: Added vendor "Lexmark". + * doc/sane.tex: Added vendor "Lexmark". Used current date. + * doc/descriptions-external/lexmark.desc + doc/descriptions/lexmark.desc: Moved to doc/descriptions. Added + "new" marker. Added manpage link. Updated version. Marked X1180 + as "basic" according to man page. + * doc/sane.man: Added lexmark backend. + * backend/Makefile.in doc/Makefile.in tools/Makefile.in: Make + "make dist" work again. + * acinclude.m4 configure include/sane/config.h.in: Check for + pthread_cancel() and pthread_testcancel(). + +2005-10-15 Jochen Eisinger <jochen@penguin-breeder.org> + + * doc/descriptions/mustek_pp.desc: add Medion MD9806 scanner as + supported + +2005-10-14 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-options.c backend/snapscan-scsi.c + backend/snapscan.c backend/snapscan-sources.c: + Fixes for 16 bit scan mode from Simon Munton + +2005-10-11 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-options.c backend/snapscan-scsi.c + backend/snapscan.c backend/snapscan-sources.c: + Fixes for Epson 3490/3590 and 16 bit scan mode + +2005-10-11 Stephane Voltz <stefdev@modulonet.fr> + + * backend/umax_pp.c: change sane_start semantic to allow for batch + scanning + +2005-10-08 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/mustek_a3p1.desc: Downgraded status to + minimal. + * doc/descriptions/mustek_usb2.desc: Added "new" marker. + +2005-10-06 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added HP ScanJet 3800c. + * frontend/scanimage.c: Use correct size for fgets. Patch from + Antoine Jacoutot <ajacoutot@lphp.org>. + +2005-10-05 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * backend/microtek2.c: Off-by-one error + +2005-10-03 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * AUTHORS acinclude.m4 configure configure.in backend/Makefile.in + backend/dll.conf backend/mustek_usb2.c backend/mustek_usb2.h + backend/mustek_usb2_asic.c backend/mustek_usb2_asic.h + backend/mustek_usb2_high.c backend/mustek_usb2_high.h + backend/mustek_usb2_reflective.c backend/mustek_usb2_transparent.c + doc/Makefile.in doc/sane-mustek_usb2.man + doc/mustek_usb2/mustek_usb2.CHANGES + doc/mustek_usb2/mustek_usb2.TODO: + Added mustek_usb backend which supports the Mustek BearPaw 2448 + TA Pro. Changes of the code before inclusion to CVS can be found + in doc/mustek_usb2/mustek_usb2.CHANGES. + * doc/sane.man: Added mustek_usb2. Added description for u12 + backend. Added missing links to other backends. + * doc/descriptions/mustek_usb2.desc: Moved from + descriptions-external. Updated. + * PROJECTS: Removed link to BeOS (link goes to nowhere, SANE + website has links to projects). Removed link to wi32 port + (included in SANE). Removed link to SaneTwain (listed on SANE + website). + * doc/doxygen-sanei.conf.in: Updated to current doxygen + version. Output more C-friendly format. + * include/sane/sanei.h include/sane/sanei_backend.h + include/sane/sanei_debug.h include/sane/sanei_pp.h + include/sane/sanei_usb.h: Fixed some bugs in doxygen + documentation. Added some comments. + +2005-10-02 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek.c: Bumped build number. + * backend/plustek-usbdevs.c backend/plustek-usb.h: Updated motor + settings for Canoscan LiDE25, thanks to Stephan February + <stephanf@singnet.com.sg> for providing these values. + +2005-10-02 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/as6e.desc: Added Trust Easy Scan 9600 Plus (bug + #301000). + * backend/sharp.c: Fixed some compilation warnings (bug #300404). + * AUTHORS: Fixed Rene Rebe's email address. + * doc/descriptions/unsupported.desc: Removed Epson Perfection 4180 + (supported by epkowa backend). + +2005-10-01 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/mustek_a3p1.desc + doc/descriptions/unsupported.desc: Added external mustek_a3p1 + backend that supports Mustek P 3600 A3 Pro. + * tools/Makefile.in: Added udev to list of directories that are + part of the distribution. + * doc/descriptions.txt: Yet another "itsself". + * backend/sp15c.c: Fixed some warnings (bug #302290). + +2005-10-01 Julien Blache <jb@jblache.org> + * doc/sane-find-scanner.man: Typo fix, s/itsself/itself/ from + Alfie Costa. + +2005-09-29 Eddy De Greef <eddy_de_greef at tiscali dot be> + + * backend/mustek_pp_cis.c: Minor bug fix: wrong model name was + reported for 1200CP+ driver. + +2005-09-29 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c + backend/gt68xx_generic.c backend/gt68xx_generic.h + backend/gt68xx_high.c backend/gt68xx_low.c backend/gt68xx_low.h + doc/sane-gt68xx.man doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: + Added support for Plustek OpticSlim M12 (untested). Based on patch + from Gerhard Jaeger <gerhard@gjaeger.de>. Fixed gt68xx homepage + links in man page. Changed minimum version of libusb to 0.1.8. + * doc/descriptions/unsupported.desc: Removed Plustek OpticSlim M12. + +2005-09-28 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-options.c backend/snapscan-scsi.c + backend/snapscan.c backend/snapscan.h: + Added 16 bit option for Epson scanners, untested. + Reenabled enhanced inquiry command for epson scanners. + +2005-09-28 Julien Blache <jb@jblache.org> + * tools/udev/convert-usermap.sh: Don't print 0x when matching VID + and PID. + +2005-09-28 Julien Blache <jb@jblache.org> + * tools/udev/convert-usermap.sh: Added script to convert + hotplug/libsane.usermap to a udev rules file. udev 070 + linux + 2.6.14 will deprecate hotplug. + * tools/README: updated. + +2005-09-28 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/brother.desc: Removed duplicate entry. + * doc/descriptions/genesys.desc: Added link to genesys homepage. + +2005-09-26 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * tools/sane-find-scanner.c: Print more clear output if no USB + scanners are found. Point to manual page. Warn if libusb support + hasn't been built. + +2005-09-25 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/lexmark.desc + doc/descriptions/unsupported.desc: Added external lexmark + backend. Moved Lexmark X11?? devices to lexmark.desc. Based on + patch from Fred Odendaal <freshshelf@rogers.com>. + +2005-09-25 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-scsi.c: Removed debugging code for + Epson scanners until a working solution has been found. + +2005-09-23 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * README: Mention in addition to the listed libraries, their + header files are also neccessary. A missing usb.h is a common + problem when building SANE (--> no USB support). + * configure configure.in: Added warning message that's printed + when libusb or its header file is not available. + * frontend/scanimage.c doc/scanimage.man: Added progress indicator + to scanimage (based on patch from Mario Goppold + <mgoppold@tbz-pariv.de>). Updated copyright information, added + links to sane-devel mailing list. + * sanei/sanei_usb.c: Ignore EBUSY from usb_set_configuration. This + function fails, if a different interface of the same device is + claimed (e.g. by usblp). + +2005-09-22 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * backend/hp4200.c backend/umax.c backend/umax1220u.c + include/sane/sanei_pv8630.h sanei/sanei_pv8630.c: + Fix SANE_DEBUG_SANEI_PV8630 + +2005-09-19 Frank Zago <sane at zago.net> + + * backend/dc210.c backend/leo.c backend/matsushita.c + backend/sceptre.c backend/sp15c-scsi.h backend/sp15c.h + backend/teco1.c backend/teco2.c backend/teco3.c + include/sane/sanei_backend.h: Replaced __unused__ with + __sane_unused__ to avoid a namespace conflict. + +2005-09-18 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx_high.c + doc/descriptions/gt68xx.descdoc/gt68xx/gt68xx.CHANGES + doc/gt68xx/gt68xx.TODO: Fixed segfault that may happen with + Mustek ScanExpress A3 USB. + * doc/backend-writing.txt: Added some hints about number of + files. + * backend/mustek.conf doc/sane-mustek.man + doc/descriptions/mustek.desc: Mustek Paragon 600 II EP + works. Mentioned "parport0". + * doc/descriptions/unsupported.desc: Added Canon PIXMA MP750. + +2005-09-17 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * README.darwin: New date for good libusb from CVS + +2005-09-07 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * acinclude.m4, configure: fix disabling of locking when the + locking user group does not exist + +2005-09-07 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Genius ColorPage Slim + 1200. + +2005-09-07 Oliver Schirrmeister <oschirr@abm.de> + + * backend/fujitsu.c: enabled dropoutcolor for all fi-* scanners. + Applied patch from Mario Goppold: Bugfixes for the M3092DCd + +2005-09-05 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * po/sane-backends.ru.po: Updated Russian translation (from Vitaly + Lipatov <LAV@vl3143.spb.edu>). + +2005-09-03 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.h backend/snapscan-scsi.c: (Hopefully) fixed + some debugging code for Epson scanners that only works after + firmware upload. + +2005-09-02 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Epson Perfection 4490 + Photo. + * tools/hotplug/libsane.usermap: Added HP PSC 750. + +2005-09-01 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx_devices.c + backend/gt68xx_generic.c backend/gt68xx_high.c + doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Genius + ColorPage Vivid 1200 X is reported to work. Genius ColorPage Vivid + 4 XE seems to be the same as 4 X, it just doesn't have + buttons. Cleanup of .desc file. Fixed gain setting. Mustek + ScanExpress A3 USB 600 dpi color scanning works now. + * tools/check-usb-chip.c: Added detection for SQ113 chip + (e.g. Mustek BearPaw 2448 TA Pro). + +2005-08-31 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Removed Mustek 1800 A3 Pro + (this is actually a P3600 A3 Pro). + * doc/descriptions-external/mustek_usb2.desc: Mustek BearPaw 2448 + TA Pro has status "good" now. + +2005-08-30 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Removed Mustek BearPaw 2448 + TA Pro (now supported by external Mustek USB2 backend). Added + comments about that backend to some other scanners that may be + supported later. + * doc/descriptions-external/mustek_usb2.desc: New external Backend + for Mustek BearPaw 2448 TA Pro. + +2005-08-29 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Canon LiDE 60 is GL841 based. + +2005-08-28 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/canon630u.desc: Changed status of Canon 636u + too "good". + +2005-08-27 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions-external/brother2.desc: Brother MFC-5440CN is + reported to work (bug #302105). + +2005-08-24 St~hane Voltz <stefdev@modulonet.fr> + + * backend/umax_pp.c backend/umax_pp_low.c tools/umax_pp.c: Added EPP + support for 610P, revision number changes + +2005-08-23 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Canon LiDE 60. Reflecta + Digitdia 3600 is not GL841-based. + +2005-08-22 St~hane Voltz <stefdev@modulonet.fr> + + * tools/check-usb-chip.c: Added rts8858c detection (Lexmark + X1100 series, Dell A920). + +2005-08-22 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * tools/hotplug/libsane.usermap: Added some Genius scanners. Fixed + Visioneer Onetouch 7300 USB. Added Plustek OpticSlim 2400. + * README.openbsd: Mention problems with library names. + +2005-08-22 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek.c: Bumped build number. + * backend/plustek-usb.c backend/plustek-usbscan.c: Fixed problem, + when trying to scan at resolutions beyond the optical one + (sensor stops too early). + * tools/hotplug/libsane.usermap: Added USB ID for LiDE25. + +2005-08-21 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/microtek2.desc + doc/descriptions/unsupported.desc: Marked microtek2 backend as + unsupported. Changed link to point to old website directly. Listed + Microtek ScanMaker 9800XL as supported (bug #301515). + +2005-08-21 Mattias Ellert <mattias.ellert@tsl.uu.se> + + * ltmain.sh acinclude.am configure: Updated from libtool 1.5.18. + +2005-08-20 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c + backend/gt68xx_low.h doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: + Increased number limit of scanners that can work with this + backend to 50. Added support for Genius ColorPage Vivid 1200 X + (untested). + +2005-08-19 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: Fixed check for usbcalls.h on OS/2 + (patch from Paul Smedley <paul@smedley.info>). + * backend/gt68xx.c backend/gt68xx_devices.c doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES: Enabled GT68XX_FLAG_NO_STOP for + Mustek BearPaw 2400 CU Plus. Some of these scanners don't seem + to like that command. + * doc/descriptions/artec_eplus48u.desc: Disabled link to backend + homepage which doesn't seem to contain anything sane-related. + +2005-08-19 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek-usb.h backend/plustek-usbdevs.c: Removed obsolete + _WAF_BLACKFINE. LiDE20 does not seem to have a reliable black + calibration area, so the devices now will switch off the lamp + for dark calibration. + * backend/plustek-usbcal.c backend/plustek-usbscan.c: Cleanup. + * backend/plustek-usbshading.c: Fixed line statistics and added + calibration data output. + * backend/plustek.c: Bumped build number. + +2005-08-18 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * backend/gt68xx.c backend/gt68xx_low.c backend/gt68xx_low.h + doc/sane-gt68xx.man doc/descriptions/gt68xx.desc + doc/gt68xx/gt68xx.CHANGES doc/gt68xx/gt68xx.TODO: + Fixed the problem concerning scanning on *BSD. Scanning only + worked once (bug #300597). Fixed compilation warnings. + +2005-08-17 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * README: Min. libusb version is 0.1.8. + +2005-08-17 Julien Blache <jb@jblache.org> + + * tools/hotplug/libsane.usermap: Added USB IDs for the + sm3600-supported scanners. If you know the exact model name + corresponding to the above IDs, please mail sane-devel: + 0x05da/0x40b3, 0x05da/0x40b8, + 0x05da/0x40ca, 0x05da/0x40dd, 0x05da/0x40ff + +2005-08-16 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan-scsi.c: Make compileable ;-) + * backend/snapscan-options.c: Removed //-style comment + +2005-08-16 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/unsupported.desc: Added Canon PIXMA MP780 and + Lexmark P6250. + * tools/sane-find-scanner.c: Don't print anything else but the + found messages in "-q" mode. + * tools/check-usb-chip.c: Added check for combination of a + PowerVision PV8630 (USB->parport bridge) and National + Semiconductor LM9830 as used in the HP 4200. Fixed compilation + warning. Added check for Toshiba M011 chips as used in Microtek + ScanMaker 3600, 3700, and 3750. + * configure configure.in backend/Makefile.in backend/sm3600-scanusb.c + backend/sm3600-scanutil.c backend/sm3600.c backend/sm3600.h + doc/sane-sm3600.man doc/sane-usb.man: + Removed direct dependence of sm3600 on libusb. Used sanei_usb + instead. Based on patch from Fran~is Revol <revol@free.fr>. + Updated documentation accordingly. Fixed compilation warnings. + +2005-08-15 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c: Bumped version number + * backend/snapscan-scsi.c: Added temporary debug code for 2480/2580 + distinction + +2005-08-15 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c backend/snapscan-options.c backend/snapscan-scsi.c + backend/snapscan.h doc/descriptions/snapscan.desc + backend/snapscan.conf: Added support for Epson Perfection 3490/3590 + (thanks to Matt Judge). + +2005-08-15 Gerhard Jaeger <gerhard@gjaeger.de> + + * doc/plustek/Plustek-USB.changes: Update. + * doc/descriptions/plustek.desc: Updated version number. + * backend/plustek.h. backend/plustek-usb.h backend/plustek-usbcalfile.c + backend/plustek-usbimg.c backend/plustek-usbmap.c + backend/plustek-usbdevs.c backend/plustek-usbscan.c: Cleanup. + * backend/plustek.c: Bumped version and build number. + Activated IPC between reader-process and parent. + * backend/plustek-usbio.c: usbio_DetectLM983x() now returns error if + register could not be red, usbio_ResetLM983x() checks for reg7 + value before writing. + * backend/plustek-usbhw.c: Added button support for Plustek/Genius + devices. Changed behaviour of usb_IsScannerReady(). + Added special misc I/O setup for CIS devices (usb_ResetRegisters). + * backend/plustek-usb.c: Minor fix for startup reset. + Removed unnecessary calls to usbio_ResetLM983x(). + * backend/plustek-usbshading.c: Readded kCIS670 to add 5% extra to + LiDE20 fine calibration. + * backend/plustek-usbcal.c: Tried to use the settings from SANE-1.0.13. + Added _TWEAK_GAIN to allow increasing GAIN during lamp coarse + calibration. Added call to speedtest function. + +2005-08-14 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * Makefile.in: Added Changelog-1.0.16 to DISTFILES. + * backend/hp4200.c doc/sane-hp4200.man + doc/descriptions/hp4200.desc: Enabled backtracking by + default. This is slower but avois bumping the scan head at the end + of the scan area and also missing parts of the scanned + image. Increased safety margin for backtracking. This fixes the + "garbled image" bug. Set default gamma value to 2. Manpage + update. Status set to "basic". + * frontend/scanimage.c: Don't exit with error when trying to set + inactive options. This especially happens in connection with + geometry options and the v4l backend (bugs #300321, #301977). + +2005-08-13 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * doc/descriptions/niash.desc doc/descriptions/sm3840.desc: + Removed ":new". + * AUTHORS configure configure.in backend/Makefile.in + backend/dll.conf backend/hp4200.c backend/hp4200.conf + backend/hp4200.h backend/hp4200_lm9830.c + backend/hp4200_lm9830.h doc/Makefile.in + doc/sane-hp4200.man doc/sane.man + doc/descriptions/hp4200.desc: Added hp4200 backend. Code from + Julien BLACHE's sane-backends-extras debian package, based on + Frank Zago's patches based on Adrian Perez Jorge's code. Fixed + compilation warnings. Fixed bug when no sane device was + given. Code indented by indent -gnu. Added man page. + * doc/descriptions-external/hp4200.desc: Removed (backend is now + included). + * configure configure.in: Moved CPPFLAGS definition down to avoid + problems with libtool tests for -fPIC. + +2005-08-10 Gerhard Jaeger <gerhard@gjaeger.de> + + * backend/plustek_pp.c: Bumped build number. + * backend/plustek_pp-genericio.c: Fixed bug, that causes ASIC96003/1 + based devices to move their sensors too fast in lineart mode at + 200 and 300dpi. + * doc/plustek/Plustek-PARPORT.changes: Update. + +2005-08-09 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * sanei/sanei_usb.c: Minor fixes for usbcalls interface (patch + from Paul Smedley <paul@smedley.info>). + * doc/descriptions/unsupported.desc: Added Hewlett-Packard Scanjet + 4370. + +2005-08-08 Gerhard Jaeger <gerhard@gjaeger.de> + + * acinclude.m4 configure: Locking feature will be disabled on OS/2 + per default (according to Paul Smedley <paul@smedley.info>). + * doc/plustek/Plustek-USB.changes: Update. + * backend/plustek.c: Bumped build number. + * doc/plustek/Plustek-USB.txt doc/descriptions/plustek.desc + doc/sane-plustek.man backend/plustek-usb.c backend/plustek-usbdevs.c: + Added support for CanoScan LiDE25. + +2005-08-07 Oliver Schwartz <Oliver.Schwartz@gmx.de> + + * backend/snapscan.c: Use first known device if no explicit device name + is specified + +2005-08-07 Henning Meier-Geinitz <henning@meier-geinitz.de> + + * configure configure.in: Updated version. Enabled compilation + warnings. + * doc/releases.txt: Typo fix. + * config.guess config.sub: Updated from libtool 1.5.18. + * configure configure.in include/sane/config.h.in + sanei/sanei_usb.c: Added support for usb functionality on OS/2 + using the usbcalls interface (patch from Paul Smedley + <paul@smedley.info>). + * sanei/sanei_usb.c: Fixed some compilation warnings. + +Older entries can be found in ChangeLog-1.0.16. |