diff options
Diffstat (limited to 'backend/artec_eplus48u.conf.in')
| -rw-r--r-- | backend/artec_eplus48u.conf.in | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/backend/artec_eplus48u.conf.in b/backend/artec_eplus48u.conf.in new file mode 100644 index 0000000..0b20c6e --- /dev/null +++ b/backend/artec_eplus48u.conf.in @@ -0,0 +1,119 @@ +# artec_eplus48u - SANE Backend configuration file + +# This section is for use with the Artec E+ 48U scanner +# This scanner is also sold as +# Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394 +# This sections contains verbose description of each option. +# For other scanners, see below. +# +# The USB section: +# each device needs at least the following line: +# usb vendor-ID and product-ID +# Every device configuration in this file must begin with an usb entry. +usb 0x05d8 0x4003 + +# Path to the firmware file +# This file comes with the Windows driver +# The scanner won't work without it +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/Artec48.usb + +# Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes +option ePlusPro 0 + +# for adjusting the default gamma values +option redGamma 1.0 +option greenGamma 1.0 +option blueGamma 1.0 +option masterGamma 1.9 + +#Use this options to set the default offset and exposure time values. +option redOffset 0x28 +option greenOffset 0x2f +option blueOffset 0x2f +option redExposure 0xa7 +option greenExposure 0x116 +option blueExposure 0xdc + +# The vendor and model string +# This string is displayed by the frontends. If you do not want to get your +# scanner reported as "Artec E+ 48U", then change the option accordingly. +option vendorString "Artec" +option modelString "E+ 48U" + +# device-name +# +# If autodetection does not work, then you can specify the device here +# The device entry must be the last one in this config file (or the last one before a +# new usb entry). +#If you are using libusb, a device looks like this: +#device libusb:001:002 +#If you are using the scanner module (kernel driver), a device looks like this: +#device /dev/usbscanner + +# ---------------------------------------------------------------------------- + +# Since the Trust Easy Webscan 19200 uses a different product id, we add +# another usb section here. +usb 0x05d8 0x4006 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/Artec48.usb +option vendorString "Trust" +option modelString "Easy Webscan 19200" + +# ---------------------------------------------------------------------------- + +# Since the Memorex Mem48U uses a different product id, we add +# another usb section here. +usb 0x05d8 0x4005 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/Artec48.usb +option vendorString "Memorex" +option modelString "MEM 48U" + +# ---------------------------------------------------------------------------- + +# Since the Trust 240H Easy Webscan Gold uses a different product id, we add +# another usb section here. +usb 0x05d8 0x4007 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/Artec48.usb +option ePlusPro 1 +option vendorString "Trust" +option modelString "240H Easy Webscan Gold" + +# ---------------------------------------------------------------------------- + +# Since the UMAX AstraSlim SE uses a different product id, we add +# another usb section here. +usb 0x05d8 0x4009 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/Artec48.usb +option vendorString "UMAX" +option modelString "AstraSlim SE" + +# ---------------------------------------------------------------------------- + +# This section is for the Artec E+ Pro +# Note, that the name of the firmware file is called 1200.usb for +# this device +usb 0x05d8 0x4004 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/1200.usb +option ePlusPro 1 +option vendorString "Artec" +option modelString "E+ Pro" + +# ---------------------------------------------------------------------------- + +# This section is for the UMAX AstraSlim 1200 SE +# Note, that the name of the firmware file is called 1200.usb for +# this device +usb 0x05d8 0x4010 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/1200.usb +option vendorString "UMAX" +option modelString "AstraSlim 1200 SE" + +# ---------------------------------------------------------------------------- + +# Since the Yakumo Scan50 uses a different product id, we add +# another usb section here. +usb 0x05d8 0x4011 +option artecFirmwareFile @DATADIR@/sane/artec_eplus48u/Artec48.usb +option vendorString "Yakumo" +option modelString "Scan50" + |