1 files changed, 67 insertions, 0 deletions
diff --git a/backend/u12.conf.in b/backend/u12.conf.in
new file mode 100644
index 0000000..c5457cb
--- /dev/null
+++ b/backend/u12.conf.in
@@ -0,0 +1,67 @@
+# U12-SANE Backend configuration file
+#
+
+# each device needs at least two lines:
+# - [usb] vendor-ID and product-ID
+# - device devicename
+# i.e. for Plustek (0x07B3) U1212 (0x0001)
+# [usb] 0x07B3 0x0001
+# device /dev/usbscanner
+# or
+# device libusb:bbb:ddd
+# where bbb is the busnumber and ddd the device number
+# make sure that your user has access to /proc/bus/usb/bbb/ddd
+#
+# additionally you can specify some options
+# warmup, lOffOnEnd, lampOff
+#
+# For autodetection use
+# [usb]
+# device /dev/usbscanner
+#
+# or simply
+# [usb]
+#
+# or if you want a specific device but you have no idea about the
+# device node or you use libusb, simply set vendor- and product-ID
+# [usb] 0x07B3 0x0001
+# device auto
+#
+# NOTE: autodetection is safe, as it uses the info it got
+#       from the USB subsystem. If you're not using the
+#       autodetection, you MUST have attached that device
+#       at your USB-port, that you have specified...
+#
+
+[usb]
+
+#
+# options for the previous USB entry
+#
+# switch lamp off after xxx secs, 0 disables the feature
+option lampOff 300
+
+# warmup period in seconds, 0 means no warmup
+option warmup 15
+
+# 0 means leave lamp-status untouched, not 0 means switch off
+# on sane_close
+option lOffOnEnd 1
+
+#
+# for adjusting the default gamma values
+#
+#option redGamma         1.5
+#option greenGamma       1.5
+#option blueGamma        1.5
+#option grayGamma        1.5
+
+#
+# and of course the device-name
+#
+device auto
+
+#
+# to define a new device, start with a new section:
+# [usb] 
+#