diff options
Diffstat (limited to 'backend/umax.conf.in')
| -rw-r--r-- | backend/umax.conf.in | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/backend/umax.conf.in b/backend/umax.conf.in new file mode 100644 index 0000000..a57cf53 --- /dev/null +++ b/backend/umax.conf.in @@ -0,0 +1,117 @@ +# +# Options for the umax backend +# + +# define scsi queueing depth +#option scsi-maxqueue 2 + +# define scsi buffer size in bytes +#option scsi-buffer-size-min 65536 +#option scsi-buffer-size-max 262144 + +# define scan lines that shall be read in one block +#option scan-lines 100 +#option preview-lines 20 + +# define how to handle bad sense codes +# 0 = handle as device busy +# 1 = handle as ok +# 2 = handle as i/o error +# 3 = ignore bad error code - continue sense handler, +#option handle-bad-sense-error 0 + +# define if a request sense command shall be executed +#option execute-request-sense 0 + +# define if the preview bit shall be set when scanning in rgb mode +#option force-preview-bit-rgb 0 + +# define if slow speed flag shall be set +# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET FALSE +# -1 = automatically set by driver - if known +# 0 = disabled +# 1 = enabled +#option slow-speed 0 + +# define if care-about-smeraring flag shall be set +# BE CAREFUL WITH THIS OPTION, IT MAY DESTROY YOUR SCANNER WHEN SET FALSE +# -1 = automatically set by driver - if known +# 0 = disabled +# 1 = enabled +#option care-about-smearing 0 + +# define if the calibration shall be done for selected scanarea or for each ccd pixel +# -1 = automatically set by driver - if known +# 0 = disabled +# 1 = enabled +#option calibration-full-ccd 1 + +# define if an offset of the calculate calibration with has to be used +# -99999 = auto +#option calibration-width-offset -99999 + +# define the number of pixels that is used for calibration +# -1 = disabled +# 0 = not set +# 1 = 1 byte/pixel, +# 2 = 2 bytes/pixel +#option calibration-bytes-pixel -1 + +# define if scanner uses the same exposure times for red, green and blue +# -1 = automatically set by driver - if known +# 0 = disabled (own selection for red, green and blue) +# 1 = enabled (same values for red, green and blue) +#options exposure-time-rgb-bind 0 + +# define if shading data shall be inverted befor sending it back to the scanner +# -1 = automatically set by driver - if known +# 0 = disabled +# 1 = enabled +#option invert-shading-data 0 + +# define if the scanner supports lamp control commands +# 0 = automatically set by driver - if known +# 1 = enabled +#option lamp-control-available 0 + +# define how 16 bit gamma data is padded +# -1 = automatically set by driver - if known +# 0 = gamma data is msb padded +# 1 = gamma data is lsb padded +#option gamma-lsb-padded 0 + +# define connection type of following devices +# 1 = scsi +# 2 = usb +#option connection-type 1 + +# linux device identification: +#scsi vendor model type bus channel id lun +scsi UMAX * Scanner +scsi LinoHell JADE +scsi LinoHell Office +scsi LinoHell Office2 +scsi LinoHell SAPHIR2 +scsi LinoHell SAPHIR3 +scsi Linotype SAPHIR4 +scsi LinoHell OPAL2 +scsi HDM LS4H1S +scsi Nikon AX-110 +scsi Nikon AX-210 +scsi KYE ColorPage-HR5 +scsi EPSON Perfection600 +scsi ESCORT "Galleria 600S" +scsi TriGem PowerScanII + +# Umax Astra 2200 via USB: +# usb vendor product +usb 0x1606 0x0230 + +# scsi device list +option connection-type 1 +/dev/scanner + +# usb device list +option connection-type 2 +/dev/usbscanner + |