From 1edb02101a9306fc711cd422ed507d18165b1691 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sat, 15 Jul 2017 11:25:39 +0200 Subject: move from support/1.0.27 to feature/1.0.27 --- ChangeLog-1.0.20 | 2087 ------------------------------------------------------ 1 file changed, 2087 deletions(-) delete mode 100644 ChangeLog-1.0.20 (limited to 'ChangeLog-1.0.20') diff --git a/ChangeLog-1.0.20 b/ChangeLog-1.0.20 deleted file mode 100644 index fbaacaa..0000000 --- a/ChangeLog-1.0.20 +++ /dev/null @@ -1,2087 +0,0 @@ -2009-05-03 Chris Bagwell - * Makefile.in, aclocal.m4, configure, */Makefile.in: Regenerated - with newer automake. - * backend/Makefile.am, tools/sane-config.in: Add missing - $GPHOTO2_LDFLAGS so library can be found. - * tools/Makefile.am: Add mising $SCSI_LIBS to sane-find-scanner. - -****** Release of sane-backends 1.0.20. End of code freeze ****** - -2009-05-03 m. allan noah - * config.guess, config.sub: updated to latest versions - * NEWS, configure.in, configure: updated for 1.0.20 - * sane-backends.lsm, doc/releases.txt: minor tweaks - * doc/descriptions/coolscan3.desc, doc/descriptions/rts8891.desc: - add :new marker, correct manpage link - -2009-05-01 m. allan noah - * backend/fujitsu.c: copy_buffer() needs to count lines, or M309[12] - cannot scan in duplex - -2009-04-30 m. allan noah - * backend/fujitsu.c: ignore errors in scanner_control(), - M3091 has not worked since sane 1.0.19, due to this. - -2009-04-30 m. allan noah - * acinclude.m4, backend/gphoto2.c, configure, include/sane/config.h.in: - deal with upcoming gphoto2 interface change (patch by Chris Bagwell) - * po/sane-backends.nl.po: updates from Martin Kho - -2009-04-29 m. allan noah - * po/sane-backends.nl.po: updates from Martin Kho - * po/sane-backends.de.po: updates from Burkhard Luck - * po/Makefile.am, po/Makefile.in, po/sane-backends.en_GB.po: new - translation from Andrew Coles - * po/*.po: rebuilt with new strings - -2009-04-29 Stéphane Voltz - * doc/sane-genesys.man doc/sane-rts8891.man: documentation updates and - cleanups - -2009-04-28 Julien Blache - * sanei/sanei_scsi.c: /proc/scsi is being deprecated in the Linux - kernel; use sysfs for SCSI device enumeration in - sanei_scsi_find_devices() by default, keep - sanei_proc_scsi_find_devices() as a fallback option. - -2009-04-27 Gerhard Jaeger - * backend/plustek-usbdevs.c: - Tweaked highspeed settings for Epson 1260 - -2009-04-27 Stéphane Voltz - * backend/rts8891.c backend/rts8891.h backend/rts8891_devices.c - backend/rts8891_low.c backend/rts8891_low.h backend/rts88xx_lib.c - backend/rts88xx_lib.h: turn off scanner sharing option to off by default - to keep on the safe side, copyright and internal version updates. - -2009-04-27 Stéphane Voltz - * backend/genesys.c backend/genesys_gl646.c backend/genesys_devices.c: - shading calibration fixes for HP2300 - -2009-04-25 Alessandro Zummo - * backend/epson2.c: fixed TPU warmup retry - -2009-04-23 Stéphane Voltz - * backend/genesys.c backend/genesys_gl646.c backend/genesys_devices.c: - y scan position and shading calibration fixes for MD5345/MD6471 - -2009-04-23 m. allan noah - * doc/descriptions/fujitsu.desc: update S1500 status to complete - -2009-04-22 m. allan noah - * include/sane/sane.h: convert new frame and status to #define - -2009-04-21 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc, - backand/pixma_mp150.c: - Updated documentation for Pixma MP240, reported to work fine by Nik. - -2009-04-21 Alex Belkin - * backend/xerox_mfp.c: update version number. - -2009-04-20 m. allan noah - * backend/fujitsu.c, backend/fujitsu.conf.in, - doc/descriptions/fujitsu.desc: add S1500 usb ids and status - * backend/canon_dr.c: update credits - * doc/sane-fujitsu.man, doc/sane-canon_dr.man: update version numbers, - dates, credits and known issues - * doc/saned.man: remove section about uncontrolled data port range - -2009-04-20 Alessandro Zummo - * backend/coolscan3.c: temporarily disable infrared. - -2009-04-17 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc: - Updated documentation for Pixma MP540, reported to work fine by Rogge. - -2009-04-17 Pierre Willenbrock - * backend/genesys.c, backend/genesys_gl646.c, - backend/genesys_gl841.c, backend/genesys_low.h: Always do shading - calibration in color mode on gl841. - * backend/genesys.c, backend/genesys_gl841.c: Fix bugs introduced above. - -2009-04-16 Stéphane Voltz - * backend/genesys.h backend/genesys.c backend/genesys_gl646.c - backend/genesys_devices.c: y scan position fixes - - added a 'clear calibration cache button' - -2009-04-15 Stéphane Voltz - * backend/genesys.c backend/genesys_gl646.c: calibration cache - activation for gl646 based scanners - -2009-04-15 m. allan noah - * backend/fujitsu.c, doc/descriptions/fujitsu.desc: backend v93 - - return cmd status for reads of sensor options - * backend/canon_dr.c, doc/descriptions/canon_dr.desc: backend v26 - - return cmd status for reads of sensor options - - allow rs to adjust read length for all bad status responses - -2009-04-14 Stéphane Voltz - * backend/genesys.c backend/genesys_devices.c backend/genesys_gl646.c: - shading calibration rework for GL646 based scanners - -2009-04-13 m. allan noah - * tools/sane-desc.c: fix double summing of untested column - -2009-04-13 Stéphane Voltz - * backend/rts8891.c: minor version change to test commit scripts - -2009-04-13 Stéphane Voltz - * backend/pnm.c: conditional handling of STATUS_HW_LOCKED - and STATUS_WARMING_UP - -2009-04-12 m. allan noah - * doc/doxygen-sanei.conf.in: update to recent version of doxygen - -2009-04-12 m. allan noah - * configure.in: change version to 1.0.20cvs - * configure: rebuild from configure.in - * include/sane/sane.h: hide API changes (minor, frame and status) - * backend/canon_dr.c, backend/fujitsu.c: SANE_FRAME_JPEG - * backend/coolscan3.c: SANE_FRAME_RGBI - * backend/genesys_gl646.c, backend/genesys_gl841.c: STATUS_HW_LOCKED - * backend/rts8891.c, frontend/scanimage.c: STATUS_WARMING_UP - * backend/pixma_io_sanei.c, backend/xerox_mfp.c, - backend/sane_strstatus.c: STATUS_HW_LOCKED & STATUS_WARMING_UP - * doc/releases.txt: minor updates for new build system - -2009-04-07 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc: - Updated documentation for i-SENSYS MF4018 support. - -2009-04-07 Julien Blache - * doc/descriptions-external/epkowa.desc: update for iScan 2.19.0, - from Olaf Meeuwissen. - -2009-04-05 Nicolas Martin - * backend/pixma_io.h, backend/pixma_io_sanei.c, doc/sane-pixma.man: - Increased timeouts for read bulk and write bulk operations to 10s - Changed minimum timeout for interrupt read to 100ms - For MAC OS X : added a wrapper to sanei_usb_read_int as darwin libusb - does not handle timeouts in interrupt reads. This disables button scan - for MAC OS X, updated man page with this info. - * backend/pixma_mp150.c: - Added 2 new Canon Pixma models but usb pid/vid yet unknown. - -2009-04-05 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr.conf.in: backend v24 - - fix DR-2510C duplex deinterlacing code - - rewrite sane_read helpers to read until EOF - - update sane_start for scanners that dont use object_position - - dont call sanei_usb_clear_halt() if device is not open - - increase default buffer size to 4 megs - - set buffermode on by default - - hide modes and resolutions that DR-2510C lies about - - read_panel() logs front-end access to sensors instead of timing - - rewrite do_usb_cmd() to use remainder from RS info - * doc/desciptions/canon_dr.desc: backend v24, update DR-2510C comment - -2009-03-31 Louis Lagendijk - * backend/pixma_bjnp.c: - - silenced some debug statements during scanner detections - - increased timeouts to 20 seconds as 10 seconds is apparently - - not enough for the combination of a Mac and an MX850. - -2009-03-21 Alex Belkin - * backend/xerox_mfp.conf.in: add Xerox Phaser 6110MFP - * backend/xerox_mfp.c: compatibility with scanners w/o feeder. - -2009-03-28 Julien Blache - * backend/avision.c: fix typos in error messages in - sense_handler(). - -2009-03-27 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v23 - - rewrite all image data processing code - - handle more image interlacing formats - - re-enable binary mode on some scanners - - limit some machines to full-width scanning - * doc/desciptions/canon_dr.desc: v23, improved comments - -2009-03-25 m. allan noah - * backend/canon_dr.[ch]: backend v22 - - add deinterlacing code for DR-2510C in duplex and color - -2009-03-25 Pierre Willenbrock - * backend/genesys.c, backend/genesys_gl646.c, - backend/genesys_gl841.c, backend/genesys_low.h: Add calibration cache - -2009-03-24 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v21 - - correct rgb padding macro - - skip send_panel and ssm_df commands for DR-20xx scanners - * doc/desciptions/microtek2.desc: add ScanMaker 6400XL - -2009-03-24 Chris Bagwell - * doc/Makefile.am: Don't include any template.desc. into - generated HTML files. - -2009-03-23 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v20 - - improved macros for inquiry and set window - - shorten inquiry vpd length to match windows driver - - remove status-length config option - - add padded-read config option - - rewrite do_usb_cmd to pad reads and calloc/copy buffers - * backend/canon_dr.conf.in: s/status-length/padded-read/g - -2009-03-22 m. allan noah - * backend/canon_dr.[ch]: backend v19 - - pad gray deinterlacing area for DR-2510C - - override tl_x and br_x for fixed width scanners - * doc/descriptions/canon_dr.desc: backend v19, update comments - -2009-03-21 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v15 thru v18 - - add byte-oriented duplex interlace code - - add RRGGBB color interlace code - - add basic support for DR-2580C, DR-2050C, DR-2080C, DR-2510C - - add more unknown setwindow bits - - add support for 16 byte status packets - - clean do_usb_cmd error handling (call reset more often) - - set status packet size from config file - - rewrite config file parsing to reset options after each scanner - - add config options for vendor, model, version - - dont call inquiry if those 3 options are set - - remove default config file from code - - add initial gray deinterlacing code for DR-2510C - - rename do_usb_reset to do_usb_clear - * doc/descriptions/canon_dr.desc: backend v18, update model status - * backend/canon_dr.conf.in: added better comments and new options - -2009-03-21 Pierre Willenbrock - * backend/genesys_devices.c: Enable Motor again for combined - dark/bright calibration, fix calculation of pixel number used in - calibration - * backend/genesys_devices.c, backend/genesys_gl646.c, - backend/genesys_gl841.c, backend/genesys_low.h: Remove park_head - * backend/genesys_devices.c, backend/genesys_gl841.c: Calculate - shading coefficients using maximum input resolution available - -2009-03-21 m. allan noah - * backend/fujitsu.[ch]: backend v91 - - remove unused temp file code - -2009-03-20 m. allan noah - * backend/hpljm1005.c: use private function instead of round() - -2009-03-19 Pierre Willenbrock - * backend/genesys_devices.c, backend/genesys.conf.in: - Add basic support for Visioneer XP100 rev 3 and USB IDs for - Syscan DocketPort 465 - -2009-03-06 Louis Lagendijk - * backend/pixma_bjnp.c backend/pixma_bjnp.h - backend/pixma_bjnp_private.h backend/pixma_io_sanei.c: - Make bjnp protocol more resilient against packet loss and corruption - Changed timeout for all responses to be at least 10 seconds - Send all broadcasts for scanner detection 5 times - Made sure scanners are added to device list only once - Changed device-id for bjnp so it uses scanner hostname/ip-address - instead of mac address as this is more human friendly. - To make room, use scanner model instead of USB-id (which is bogus - for network scanners - -2009-03-17 m. allan noah - * doc/desc/gt68xx.desc, backend/gt68xx.conf.in: add NeatReceipts - Mobile Scanner (from Kelly Price) - -2009-03-13 m. allan noah - * frontend/scanimage.c, doc/scanimage.man: make -B (buffer-size) - selectable, and make long name consistent. (#309672 by Johannes Berg) - -2009-03-13 m. allan noah - * tools/sane-desc.c: remove 8859-1 chars from string cleaner, - enforce only printable ASCII on output - -2009-03-13 Ilia Sotnikov - * frontend/saned.c: - - Remove unnecessary 'res' variable assignment in check_host() - (AF-indep version) - -2009-03-13 Julien Blache - * doc/descriptions-external/epkowa.desc: update for iScan 2.18.0, - from Olaf Meeuwissen. - * frontend/saned.c: rework Ilia's changes in - check_host(). Explicitly bind IPv6 addresses first, introduce - do_bindings_family() split off of do_bindings(). - -2009-03-12 Ilia Sotnikov - * frontend/saned.c: - - Allow host checking to proceed if no local name was found - -2009-03-12 Ilia Sotnikov - * frontend/saned.c: - - Use hstrerror (h_errno) instead of strerror(errno) on gethostbyname() - errors - -2009-03-12 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc: - Added ImageClass MF4010 support in pixma backend docs. - * backend/pixma_imageclass.c: - Removed ADF capability to ImageClass models without ADF - * backend/pixma.h, backend/pixma_common.c, backend/pixma_io_sanei.c: - Added a PIXMA_EOF error return code - -2009-03-09 Stéphane Voltz - * backend/genesys.c backend/genesys.h backend/genesys_devices.c - backend/genesys_gl646.c doc/descriptions/lexmark.desc: cleanups - for genesys backend. Change in document detection for gl646 - sheetfed scanners. - - lexmark backend description update - -2009-03-09 Stéphane Voltz - * backend/genesys.c backend/genesys_devices.c backend/genesys_gl646.c: - 1200 dpi scan fix and head positionning fixes - - -2009-03-07 m. allan noah - * backend/canon_dr.c, backend/canon_dr.conf.in: backend version 14 - - remove HARD_SELECT from counter (Legitimate, but API violation) - - attach to CR-series scanners as well - -2009-03-06 Louis Lagendijk - * backend/pixma_bjnp_private.h: disabled experimental/incomplete - button handling for bjnp protocol as it seems to cause problems - with xsane preview - -2009-03-06 m. allan noah - * backend/canon_dr.c, backend/canon_dr.conf.in, - doc/descriptions/canon_dr.desc: backend version 13 - - new vendor ID for recent machines - - add usb ids for several new machines - - DR-4010C reported good - -2009-03-05 m. allan noah - * backend/umax1220u.c: set initial scan area dimensions to maximum - -2009-03-05 Chris Bagwell - * configure.in: Allow user to disable latex support; original - patch from Johnson Earls. - -2009-03-05 m. allan noah - * doc/descriptions-external/epkowa.desc: update all broken urls - -2009-03-04 m. allan noah - * doc/descriptions/coolscan3.desc, doc/sane-coolscan3.man, - doc/Makefile.in|am: add missing coolscan3 docs - * backend/dll.conf.in: # out epson and coolscan2, remove hpoj text - * doc/descriptions/epson2.desc: add Epson RX-620 - -2009-03-03 Pierre Willenbrock - * backend/genesys_gl841.c: Fix the generated generic gamma table. - -2009-02-28 Chris Bagwell - * tools/sane-config.in: Add space mistakenly removed during - last update. - -2009-03-03 Julien Blache - * doc/descriptions/epson.desc: add Epson RX-620 (0x04b8 0x0811), - reported by Heikki Kantola. - -2009-02-28 Chris Bagwell - * acinclude.m4, tools/sane-config.in: Add in missing libraries - to sane-config missed during fix to stop using LIBS to link everything. - Add back in code to move LDFLAGS out of $GPHOTO2_LIBS and into - GPHOTO2_LDFLAGS. - -2009-03-02 Stéphane Voltz - * backend/genesys_devices.c, backend/genesys_gl646.c: fix 400, 1200 - and 2400 dpi scan modes for MD5345/MD6471 - -2009-03-02 Julien Blache - * frontend/saned.c: work around backends that can't keep their - dirty fingers off stdin/stdout/stderr when run through inetd, - breaking the network dialog and crashing the remote net backend. - -2009-02-28 Chris Bagwell - * m4/byteorder.m4: Delete temporary file in all cases. - * backend/Makefile.am, japi/Makefile.am: Use BUILT_SOURCES - instead of dependency so that files are not compiled - during "dist" target. - -2009-02-28 Pierre Willenbrock - * backend/genesys.conf.in, backend/genesys_devices.c, - backend/genesys_gl841.c, backend/genesys_low.h: Add support for - Ambir/Syscan DocketPORT 665 - * backend/genesys.conf.in, backend/genesys_devices.c, - backend/genesys_low.h: Add support for Visioneer Roadwarrior - * backend/genesys_gl841.c: Adjust gl841 part to recent changes - -2009-02-27 Stéphane Voltz - * backend/genesys.c backend/genesys.conf.in backend/genesys.h - backend/genesys_devices.c backend/genesys_gl646.c backend/genesys_gl841.c - backend/genesys_low.h: rewrite of gl646 internals to enable easy - scanner addition and better calibration process. Untested support for - hp3670. Use of id in genesys_devices structures to have more robust - descriptions. - -2009-02-25 Chris Bagwell - * acinclude.m4, backend/*.[ch], tools/*.[ch], frontend/*.[ch]: - Global replace of u_int??_t with C9x standard based uintxx_t - in order to remove some tricky and overlapping portability logic - from acinclude.m4 and leave it in only m4/stdint.m4. - -2009-02-24 Chris Bagwell - * configure.in, m4/stdint.m4: Update to latest version to - get latest fixes and use logic to not recreate _stdint.h if - no changes (to prevent unneeded recompiles). - * m4/byteorder.m4: Added support to reuse existing byteorder.h if - no changes to prevent timestamp causing a recompile. - -2009-02-24 m. allan noah - * frontend/scanimage.c: improved comments, simplified x/y option code, - removed buggy -1/+1 x/y code (#311172), expose non-settable options, - check for invalid caps on options, handle option descs with \n - * doc/releases.txt: add note about cvs checkout on alioth. - -2009-02-24 m. allan noah - * backend/*.[ch]: more consistent #include "../include/sane/config.h" - -2009-02-24 m. allan noah - * backend/Makefile.am/in, backend/xerox_mfp.conf.in: should use conf.in - -2009-02-23 Chris Bagwell - * backend/Makefile.am: Add back in deletion of $(sanelibdir)/libsane.* - for buggy libtools. Add some minor documentation. - * doc/backend-writing.txt: Add minor document updates to reflect - conversions to automake. - -2009-02-23 m. allan noah - * backend/fujitsu.c, backend/fujitsu.conf.in, - doc/descriptions/fujitsu.desc, doc/sane-fujitsu.man: backend v90, - add S510M usb ID's, add fi-6010N to .desc - * backend/epjitsu.conf.in, doc/descriptions/epjitsu.desc, - doc/sane-epjitsu.man: add S300M usb ID's - -2009-02-23 Pierre Willenbrock - * backend/genesys_devices.c, backend/genesys_gl841.c, - backend/genesys_low.h: Add post_scan and eject_feed to struct - Genesys_Model - * backend/genesys.c, backend/genesys_gl646.c, - backend/genesys_gl841.c: Move sanei_genesys_{start,stop}_motor into - chip specific sources - backend/genesys_gl841.c: Make start/stop_(motor, now)action - actually work, various warning cleanups - -2009-02-23 Jonathan Bravo Lopez - backend/hp3900_config.c: Fix area of negative/slide scans for - HP ScanJet G3110. - -2009-02-22 Chris Bagwell - * japi/Makefile.am: Add back -version-number to java library but - also add V_REV. - * backend/Makefile.am: Use variables to add libraries to backends - instead of direct substitution. Easier to touch up variables on - problem platforms then substitution. Also, add back in creating - dll.d directory; missed during conversion. - * backend/genesys_gl841.c: Portablity fixes for strict - C compilers. - -2009-02-21 Chris Bagwell - * po/Makefile.am, configure.in: convert remaining directory, - po, to use automake. - * doc/Makefile.am: Get rid of unneeded gnu extensions to quieten - down autotools warnings. - * lib/getopt.c, lib/getopt1.c: Fix disabling getopt compile again. - -2009-02-20 m. allan noah - * backend/avision.c: backend v290, fix reader_pid and NVRAM option - issues, by Mattias Ellert. - * backend/fujitsu.c: backend v89, fi-4750 has no serial number support - * doc/descriptions/fujitsu.desc: backend v89, remove 'MAC/TWAIN' text - * doc/sane-fujitsu.man: backend v89 - * backend/.cvsignore: ignore *.loT - -2009-02-01 Mattias Ellert - * tools/Makefile.am: Add missing liblib dependencies - * frontend/scanimage.c: Restore alloca include order - -2009-02-19 Chris Bagwell - * configure.in, Makefile.am, backend/Makefile.am: Have - configure define configdir so all makefiles can use - it (fixes bug introduce with sanei converted to automake). - Enable running testsuite during distcheck. - * japa/Makefile.am: Convert japi to automake. - -2009-02-19 Julien Blache - * configure.in: add --enable-libusb_1_0 and check for libusb-1.0 - using pkg-config. - * sanei/sanei_usb.c: add support for libusb-1.0. - * tools/sane-find-scanner.c: add support for libusb-1.0. - * tools/check-usb-chip.c: compile as an empty file if libusb-1.0 - is used. - -2009-02-18 Chris Bagwell - * configure.in, tools/Makefile.am: convert tools to automake. - Add tools/openbsd to distribution package. - * include/Makefile.am: include files should have been installed - under sane/ directory when converted to automake. - * doc/Makefile.am: Cleanup. Use automake's built in support to - install docs within subdirectories. - * Makefile.am, testsuite: Convert testsuite to automake. Waiting - for test backend bugfix before enabling this to run during "distcheck". - -2009-02-18 Julien Blache - * configure.in, configure: raise avahi-client dependency to - 0.6.24, following a needed bugfix in this release. - * backend/net.c: do not lock the Avahi thread before stopping - it. It looks like it's no longer necessary to do so. - * frontend/saned.c: fix handling of Avahi server restart so it - actually works. - -2009-02-14 Chris Bagwell - * configure.in, doc/Makefile.am, frontend/Makefile.am, - include/Makefile.am, sanei/Makefile.am, tools/Makefile.am: - convert frontend, include, and sanei directories to use - automake. Only reference libsanei.la now. Use am_conditional - to compile sanei_jpeg.lo. distcheck now runs sanei/wire_test. - -2009-02-13 Chris Bagwell - * Makefile.am, configure.in, doc/Makefile.am: Convert - doc/Makefile to use automake. Main difference is that - no longer installs man pages for backends that are not - compiled. Moved install ownership of $top_srcdir docs - to $top_srcdir's Makefile. - -2009-02-06 Chris Bagwell - * configure.in, backend/Makefile.am: Add back change to - use -version-number even though its known not to work on - some platforms (OS/2). -version-info results in a variety of - version numbers in soname based on platform and would not - be easily mappable back to values currently return by - each backend's sane_init(). ltmain.sh will need to be - hand patched for any known issues. - -2009-02-08 Pierre Willenbrock - * backend/genesys_gl841.c: Remove "init device" usb request. - * backend/genesys_gl841.c, backend/genesys_devices.c, - backend/genesys_low.h: Add support for uncalibrated scans in all - modes for Visioneer Strobe XP300. Front- and backside are - side-by-side, backside mirrored horizontally. - * doc/descriptions/genesys.desc: Added XP300 to the genesys - desc file. - -2009-02-06 Chris Bagwell - * configure.in, backend/Makefile.am: Add back in support for - optionally linking in sanei_jpeg.lo under backend directory; - but using configure and not with GNU make extensions. - Move back to libtool's -version-info instead of -version-number - because the later has known bugs on platforms such as OS/2. - -2009-02-04 Chris Bagwell - * configure.in, acinclude.ac: Cleanup autoconf 2.63 warnings. - add cv_ prefix to cached variable. Remove AC_ARG_PROGRAM as - automake already invokes this. When prefered AC_USE_SYSTEM_EXTENSIONS - exists, use that instead of AC_GNU_SOURCE/AC_AIX/AC_MINUX. - Cleanup socket detection more by creating only a single - SOCKET_LIBS that contains list of all optional libraries - for any socket related funciton. Make sure that checks - for socket related functions use SOCKET_LIBS when searching. - Check for getopt_long() and getopt.h. Make OS/2 use - -no-undefined (same as windows). - * ltmain.sh, m4/libtool.m4: Upgrade to libtool 1.5.26. - * Makefile.am: Cleanups to match configure updates. - * frontend/scanimage.c, include/Makefile.in, lib/getopt.c - lib/getopt1.c, toosl/sane-desc.c, include/lgetopt.h: - Rename internal getopt.h to lgetopt.h to allow using - external getopt.h when it exists. This allows to go - back to optionally compiling getopt()/getopt_long() and its - prototypes and not have conflicts with external headers/symbols. - -2009-02-04 Nicolas Martin - * doc/sane-pixma.man doc/descriptions/pixma.desc: - Added ImageClass MF4120 support in pixma backend docs. - -2009-02-03 Julien Blache - * tools/sane-desc.c: filter out unsupported/unknown models from - output (udev/hal). - -2009-02-02 Nicolas Martin - * backend/pixma_common.c backend/pixma_common.h /backend/pixma_imageclass.c - backend/pixma_mp150.c backend/pixma_mp730.c backend/pixma_mp750.c: - Change ALIGN macro name to ALIGN_SUP for PPC compatibility. - Some cosmetic changes to source code alignment. - -2009-02-01 Alex Belkin - * backend/xerox_mfp.c backend/xerox_mfp.h: - Proper handling of parameters (to fix xsane crash). - * backend/xerox_mfp.conf doc/descriptions/xerox_mfp.desc: - Added Dell MFP 1815dn. - -2009-02-01 Chris Bagwell - * aclocalm4: fix prototype of internal strcasestr and usleep. - * configure.in: Group all USB logic together and all SCSI - logic together to aid understanding of whats no longer - valid. Allow sharing enable/disable options between all - USB drivers on multiple platforms. Combined CAM_LIBS and - SCSI_LIBS since they are mutually exclusive. - Skip some USB/SCSI checks when previous tests show it will always fail. - * backend/Makefile.am, tools/Makefile.in: Combine CAM_LIBS and - SCSI_LIBS. Add missing SOCKET_LIBS to epson2. Add USB_LIB. - * saned.c: Add limits.h for PATH_MAX. - -2009-02-01 Mattias Ellert - * acinclude.m4, backend/Makefile.am: Restore the removed - DYNAMIC_FLAG configuration. - * acinclude.m4, sanei/sanei_jpeg.c: Don't compile sanei_jpeg - if libjpeg is unavailable. - * backend/canon_dr.c, backend/hs2p-scsi.c, backend/xerox_mfp.c: - format fixes. - * backend/hs2p.c: fix missing return. - * backend/canon630u-common.c: avoid redefinition warning. - -2009-01-31 Chris Bagwell - * backend/Makefil.am: Add missing math library to coolscan2 - and coolscan3. - * acinclude.m4, configure.in: Define JPEG objects based on - existence of JPEG library and not on the dc* backends alone - since more backends then that use JPEG support. - -2009-01-30 Chris Bagwell - * frontend/saned.c: Replace usage of getgrouplist() with - getgrent() and friends. getgrouplist is not posix and not - on several platforms including cygwin. - * acinclude.m4, configure.in: Put all libraries into their - own *_LIB variables instead of $LIB so that we do not have to - link in the world to all executables. Modified SANE_CHECK_U_TYPES - to be a little more portable to platforms that use #define - for u_* types. Create SANE_CHECK_BACKENDS macro so that - PRELOADABLE_BACKENDS can also be valided. Auto-populated - PRELAODABLE_BACKENDS when detect dlopen() won't work. - Various protability cleanups. - * backend/dll.c: Make dll-preload.c a .h since its an include and - not compilable byitself. - * frontend/Makefile.in, frontend/scanimage.c, include/laaloca.h, - lib/Makefile.am, lib/alloca.c, strcasestr.c, tools/Makefile.in, - tools/sane-desc.c: Convert lib/ to automake. Create a liblib.la - for everyone to use and a libfelib.la for only frontend programs. - Make all internal programs be prefixed with sanei_ as not to conflict - with other programs libsane is linked in with that will also most - likely create similar internal utils on problem platforms. - * include/getopt.h, lib/getopt.c, lib/getopt1.c: Always compile - and link in getopt_long() but prefix it with sanei_. Its - easier to always use internal version then try to figure out what - platforms support getopt_long() and what header files to use. - * backend/Makefile.am: Convert backend makefile to automake. - Initial version that is feature parity with original but uses - specific rules instead of wildcards and only links in libraries/objs - really required. Room for more cleanup of whats linked in once - all makefiles have been converted to automake. - -2009-01-29 Chris Bagwell - * backend/epson2.c backend/pixma_bjnp.c, include/sane/sanei_backend.h, - sanei/sanei_tcp.c, sanie/sanei_udp.c: Improve portablity by - removing usage of MSG_WAITALL since not all platforms support - that (cygwin). Default is to be blocking anyways. Changed - usage of MSG_NOTWAIT to use fcntl() function as needed as well. - * configure.in, lib/Makefile.in, lib/strcasestr.c: Add internal - strcasestr() for platforms missing it (cygwin). - * pixma_common.c: Make source match header prototype for picky - compilers (cygwin). - * backend/umax_pp_mid.c: Allow BACKEND_NAME to be filename - yet debug to be SANE_DEBUG_UMAX_PP to match man page. - -2009-01-28 Julien Blache - * doc/descriptions/epson.desc: added :scsi data for the GT-7000 - and Perfection1200S. Patch from Dieter Jurzitza. - -2009-01-27 Louis Lagendijk - * backend/pixma_bjnp.c: fixed bug that caused scanner discovery to - fail when it encountered a point to point link (check data returned - by getifaddrs() - -2009-01-26 Chris Bagwell - * configure.in: Add AM_MAINTAINER_MODE to disable regenerating - configure files. This was behavior of Makefiles before automake - and works around various timestamp issues. - -2009-01-25 Pierre Willenbrock - * backend/genesys_gl841.c: Change status code for locked head to - SANE_STATUS_HW_LOCKED - -2009-01-21 m. allan noah - * doc/descriptions/canon_dr.desc: correct version, status = new - * doc/descriptions/epjitsu.desc, doc/descriptions/fujitsu.desc: version - * doc/descriptions/umax1220u.desc: correct status of 1600U - * doc/descriptions/xerox_mfp.desc: status = new - -2009-01-23 Julien Blache - * doc/descriptions-external/epkowa.desc: Update for iScan 2.16.0, - from Olaf Meeuwissen. - -2009-01-22 Chris Bagwell - * Makefile.in: Submit Makefile.in from Makefile.am submitted - previously. - * backend/epson.c, backend/epson_scsi.c, backend/epson2_net.c, - backend/epson2_scsi.c, backend/genesys_gl646.c, - backend/genesys_gl841.c, backend/lexmark_low.c, backend/rts88xx_lib.c, - backend/umax_pp.c, backend/umax_pp_low.c, backend/umax_pp_mid.c, - doc/Makefile.in, doc/sane-epson.man, doc/sane-epson2.man: - Updated backends with EXTRA_* files to allow Makefile's - to always pass in BACKEND_NAME to be fixed to backend name - instead of filename; while still making sure that - SANE_DEBUG_${BACKEND}* exist as documented in man pages. - Add references to epson and epson2 man pages about - SANE_DEBUG_EPSONx_SCSI and _NET options. - Created an epson2 man page; based mostly on epson page. - * backend/stubs.c: Currently, compiling stubs.c requires its - own compile rule simply to pass in -DSTUBS. Since its always - required, just define it in stubs.c - -2009-01-22 Stéphane Voltz - * doc/Makefile.in doc/descriptions/genesys.desc : added the rts8891 - man page to the generation and install . added XP200 to the genesys - desc file. - -2009-01-21 Chris Bagwell - * Makefile.am, lib/Makefile.in: Run all libcheck tests before - failure and look for both static and shared libraries. - Fixed $srcdir typo in lib/Makefile.in. - -2009-01-21 m. allan noah - * backend/canon_dr.[ch], backend/epjitsu.[ch], backend/fujitsu.[ch]: - - dont export private symbols - -2009-01-19 m. allan noah - * doc/descriptions-external/brother2.desc: add MFC-7840W - -2009-01-19 Nicolas Martin - * pixma_imageclass.c: - Fixed select_source message length, and typo bug in last update. - Set MP4600 series for inverted checksumming. - -2009-01-19 Stéphane Voltz - * backend/genesys.c backend/genesys.conf.in backend/genesys.h - backend/genesys_devices.c backend/genesys_gl646.c - backend/genesys_gl841.c backend/genesys_low.h: add support for - uncalibrated scans in all modes for Visioneer Strobe XP200. Add - support for buttons for MD5345/HP2300 and XP200 - -2009-01-18 m. allan noah - * doc/descriptions/unsupported.desc: everything reported from - 2008-07 to 2009-01 - -2009-01-18 Pierre Willenbrock - * backend/genesys_low.h: Fix prototype of update_hardware_sensors. - Make half-ccd mode optional. - * backend/genesys_gl841.c: Make dpihw depend on sensor pixel count - instead of sensor resolution. Make some Canon LiDE 35 specific - gpio handling conditional, add missing SCANMOD shift. Make - half-ccd mode optional. Reenable clock register setup from sensor - struct, set SCANMOD. - * backend/genesys_devices.c: Make half-ccd mode optional. - Reenable clock register setup from sensor struct, set SCANMOD. - -2009-01-17 Nicolas Martin - * pixma_mp150.c: - Fixed "Busy mode" exit processing. - -2009-01-17 Julien Blache - * doc/descriptions/hp.desc: add SCSI identifiers for the ScanJet - IIc, from Daniel Golle (sane-devel, 20061105). - * frontend/scanimage.c: make batch mode create output files - atomically. Patch by Simon Matter . - -2009-01-16 Chris Bagwell - * .cvsignore, Makefile.in, aclocal.m4, config.sub, configure, - configure.in, backend/cvsignore, include/Makefile.in, - include/sane/config.h.in, INSTALL, Makefile.am, missing: - Convert top-level Makefile to be generated by automake. - "dist" target now includes m4 directory. Updated "libcheck" - target to look at dynamic libraries instead of static. - -2009-01-16 Chris Bagwell - * doc/Makefile.in, frontend/Makefile.in, include/Makefile.in, - japi/Makefile.in, lib/Makefile.in, po/Makefile.in, - sanei/Makefile.in, testsuite/Makefile.in, tools/Makefile.in, - backend/Makefile.in: - Updates to Makefiles to prepare for transition to automake. - Fix a few bugs with "all" and "uninstall" targets to work when - $(builddir) != $(srcdir). Added $(DESTDIR) to uninstall target. - Made $(distdir) related to current directory to match automake. - -2009-01-16 Pierre Willenbrock - * backend/genesys.c, backend/genesys.h, backend/genesys_devices.c, - backend/genesys_gl646.c, backend/genesys_gl841.c, - backend/genesys_low.h: Add support for buttons on - Canon LiDE 35/40/50. - -2009-01-15 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc, - pixma_mp150.c, AUTHORS: - Updated docs and comments in pixma backend. - Added Dennis Lou to pixma backend authors - -2009-01-13 Louis Lagendijk - * AUTHORS: added myself as co-responsible for pixma backend - -2009-01-15 Alessandro Zummo - * backend/epson2.c: do not use request_identity2 with - networked scanners, fixed generation of resolution - list. - -2009-01-13 Louis Lagendijk - * backend/pixma_bjnp.c: send broadcasts from bjnp port to make - firewalling easier - -2009-01-13 Julien Blache - * tools/sane-desc.c: replace opencoded device permissions and - ownership by proper definitions. Group USB devices by vendor in - the HAL FDI output. Replace obsolete SYSFS{} key by the newer - ATTR{} key in the udev output. Add a new :scsi keyword for SCSI - devices, add support for SCSI devices in the udev and HAL FDI - outputs. - * doc/descriptions/hp.desc, doc/descriptions/epson.desc: add :scsi - keyword to a handful of SCSI scanners known to advertise - themselves as type "Processor". - - All of the above based on a patch contributed by Dieter Jurzitza. - -2009-01-10 m. allan noah - * sanei/sanei_usb.c: rescan usb every time sanei_usb_init() is called - - remove missing devices, add new devices to global lists - - based on code from stef.dev@free.fr - -2009-01-10 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v11 - - send_panel() can disable too - - add cancel() to send d8 command - - call cancel() only after final read from scanner - - stop button reqests cancel - -2009-01-10 Jeremy Johnson - * backend/hs2p.c: replaced ulong with u_long, - added static keyword for SANE_Status update_hs2p_data() - -2009-01-06 Jonathan Bravo Lopez - * backend/hp3900_sane.c, backend/hp3900_config.c, - backend/hp3900_types.c, backend/hp3900.conf.in, doc/sane-hp3900.man, - doc/descriptions/hp3900.desc: - Added support for HP Scanjet G3110 scanner. - -2009-01-05 Jeremy Johnson - Added code to read_data() to pad image data to - requested length and to zero out any garbage using - information from sense data command. Added new - MAINTENANCE_DATA struct and options to display - scanner's maintenance/callibration statistics. - *backend/hs2p.h - - added enum CONNECTION_TYPES - - added HS2P_DATA struct - - added SENSE_DATA struct to struct HS2P_Device - - added SANE_String_Const orientation_list[] - - added macros isset_ILI() and isset_EOM() - *backend/hs2p-scsi.h - - replaced request_sense struct with SENSE_DATA struct - - added #define DATA_TYPE_EOL (va_list sentinel) - - added MAINTENANCE_DATA struct - *backend/hs2p-saneopts.h - - added OPT_ORIENTATION - - added MAINTENANCE_DATA options - *backend/hs2p.c - - added MAINTENANCE_DATA options - - added unused connType to attach() - - added update_hs2p_data() to fill in options - - added hs2p_open() and hs2p_close() - - added get_hs2p_data() to read scanner data - - added print_maintenance_data() - - modified sane_control_options() to - accomodate new maintenance options and to - handle Portrait/Landscape option - replaced adf_status macro with s->data.adf_status - - modified sane_read() to correctly zero out the - missing bytes on an incomplete read and to pad - to the requested length - *backend/hs2p-scsi.c - - replaced request_sense() with get_sense_data() - - added print_sense_data() - - added SENSE_DATA *sdp to sense_handler() - - modified read_data() to handler other data type codes/qualifiers - - read_adf_status() now is replaced with call to - read_data(fd,*buf,*bufsize,dtc,dtq) - -2009-01-04 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc: - Updated doc for pixma backend (ImageClass) - -2008-12-31 Stéphane Voltz - * backend/genesys.c: restored warming up broken by a previuos commit - -2008-12-28 Nicolas Martin - * backend/pixma_imageclass.c: - Change to include different checksumming for MF41xx and MF42xx series - -2008-12-26 Alessandro Zummo - * backend/epson2.c: changed version code, - added protection from wrong settings. - -2008-12-21 m. allan noah - * backend/fujitsu.[ch]: backend v87 - - accept null pointer as empty device name - - track frontend reading sensor/button values to reload - - deactivate double feed options if df-action == default - -2008-12-21 Nicolas Martin - * doc/descriptions/pixma.desc, doc/sane-pixma.man, - backend/pixma_mp150.c: - MP800/MP800R: Fixed bug and color planes shift issues, added TPU support - for 48 bits images depth up to 1200 dpi. - MP980: following a user feedback, declared as working. - Doc and man pages updated. - -2008-12-18 m. allan noah - * backend/fujitsu.[ch]: backend v86 - - get_pixelsize() sets back window ID for back side scans - * doc/sane-fujitsu.man, doc/descriptions/fujitsu.desc: backend v86 - -2008-12-17 Julien Blache - * backend/v4l.c: unmap mapped buffer in sane_cancel(). Use libv4l1 - for v4l device access, buys us some support for v4l2 devices for - free thanks to libv4l1, libv4l2 and libv4lconvert. - * configure.in, configure: check for libv4l1 availability. - -2008-12-15 Alex Belkin - * AUTHORS, configure, configure.in, backend/Makefile.in, - backend/xerox_mfp.c, backend/xerox_mfp.h, doc/Makefile.in, - doc/descriptions/xerox_mfp.desc, doc/sane-xerox_mfp.man: - Initial commit ot xerox_mfp backed. - -2008-12-12 Julien Blache - * frontend/saned.c: add a data_portrange config file option to - saned to specify a port range for the data connection. Based on a - patch contributed by Oren Held. - * backend/saned.conf.in: add the data_portrange option to the - config file and rework the comments. - * doc/saned.man: document the data_portrange option. - -2008-12-11 Stéphane Voltz - * backend/rts8891.c doc/sane-rts8891.man doc/descriptions/rts8891.desc: - scan register setting fix, documentation update - -2008-12-10 m. allan noah - * backend/fujitsu.[ch]: backend v85 - - round pixels_per_line down to arbitrary limits for fi-4990 & fi-4860 - - fi-4860 returns random garbage to serial number queries - - initialize *info to 0 in sane_control_option() - * doc/descriptions/fujitsu.desc: backend v85, improve status/comments - * frontend/scanimage.c: initialize *info, fix buffer overwalk - -2008-12-10 m. allan noah - * backend/canon_dr.c: backend v10 - - add all documented request sense codes to sense_handler() - - fix color jpeg (remove unneeded BGR to RGB swapping code) - - add macros for LUT data - * backend/canon_dr.conf.in: add DR-2080C usb ID - * doc/descriptions/canon_dr.desc: backend v10, add DR 3020 - -2008-12-08 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v9 - - add rollerdeskew and stapledetect options - - add rollerdeskew and stapledetect bits to ssm_df() - * doc/descriptions/canon_dr.desc: backend v9 - -2008-12-08 m. allan noah - * backend/avision.c: backend v289 - - fix sending SIGTERM when reader_pid == 0 - -2008-12-07 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h: backend v8 - - rename read/send_counter to read/send_panel - - enable control panel during init - - add options for all buttons - - call TUR twice in wait_scanner(), even if first succeeds - - disable rif - - enable brightness/contrast/threshold options - * doc/descriptions/canon_dr.desc, doc/sane-canon_dr.man: backend v8 - -2008-12-06 Louis Lagendijk - * backend/pixma_bjnp.c pixma_bjnp_private.h: - replaced getlogin/getenv by getpwuid(geteuid) - -2008-12-06 Louis Lagendijk - * backend/pixma_bjnp.c pixma_bjnp_private.h: - On Ubuntu getlogin() returns NULL. So we now first try getlogin() - and if that fails, we try getenv("USER") and if that fails we use - a default user string - -2008-12-03 Stéphane Voltz - * backend/rts8891.c backend/rts8891_low.c: possible fix for - failed scan at 300 and 1200 dpi for HP4400, sensor type 2. - -2008-12-01 Julien Blache - * sanei/sanei_usb.c: fix assignment in if clause, reported on - sane-devel. - -2008-11-30 Nicolas Martin - * doc/descriptions/pixma.desc, doc/sane-pixma.man: - MP620 supported by pixma backend confirmed, doc and man pages updated. - -2008-11-29 m. allan noah - * backend/canon_dr.[ch]: backend v7 - - jpeg support (size rounding and header overwrite) - - call object_position(load) between pages even if buffering is on - - use request sense info bytes on short scsi reads - - byte swap color BGR to RGB - - round image width down, not up - - round image height down to even # of lines - - always transfer even # of lines per block - - scsi and jpeg don't require reading extra lines to reach EOF - - rename buffer option to buffermode to avoid conflict with scanimage - - send ssm_do and ssm_df during sane_start - - improve sense_handler output - * doc/descriptions/canon_dr.desc: backend v7 - -2008-11-29 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.c: backend v6 - - fix adf simplex - - rename ssm_duplex to ssm_buffer - - add --buffer option - - reduce inter-page commands when buffering is enabled - - improve sense_handler output - - enable counter option - - drop unused code - * doc/descriptions/canon_dr.desc: backend v6 - -2008-11-26 m. allan noah - * backend/*.[ch]: nearly every backend used V_MAJOR - instead of SANE_CURRENT_MAJOR in sane_init() - * backend/snapscan.c: remove EXPECTED_VERSION check - since new SANE standard is forward compatible - -2008-11-25 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.c, - doc/descriptions/canon_dr.desc: backend v5 - - remove EOF ejection code - - add SSM and GSM commands - - add dropout, doublefeed, and jpeg compression options - - disable adf backside - - fix adf duplex - - read two extra lines (ignore errors) at end of image - - only send scan command at beginning of batch - - fix bug in hexdump with 0 length string - - DR-7580 support - -2008-11-25 Nicolas Martin - * backend/pixma.c: - Fixed regression bug at end of scan for all PIXMA, noticeable - in multipage ADF scan. - -2008-11-23 Nicolas Martin - * backend/pixma_mp150.c, sane-backends/po/sane-backends.fr.po, - doc/descriptions/pixma.desc, doc/sane-pixma.man: - Support for MP630 in pixma backend. - Updated docs for MP630, and network interface to various PIXMA models - in pixma.desc. - Fixed some typos in French translations. - -2008-11-20 Stéphane Voltz - * backend/rts8891.c: fixes 'commit scan value' for HP4400. - -2008-11-20 Stéphane Voltz - * backend/rts8891.c: calibration fixes for HP4400 sensor type 3. - -2008-11-18 Alessandro Zummo - * backend/epson2.c: fixed bug when an extended command - was used with D8 level scanners. bug reported - by Kare Sars - -2008-11-17 Gerhard Jaeger - * doc/descriptions-external/epkowa.desc: - iscan 2.14.0 updates on behalf of olaf.meeuwissen@avasys.jp - -2008-11-12 Stéphane Voltz - * backend/rts8891.c: sensor detection fix. Lamp setting - change for HP4400 sensor type 3. - -2008-11-11 m. allan noah - * backend/canon_dr.c: backend v4 - - eject document when sane_read() returns EOF - -2008-11-09 m. allan noah - * backend/canon_dr.[ch], backend/canon_dr-cmd.h, doc/sane-canon_dr.man, - backend/canon_dr.conf.in, doc/descriptions/canon_dr.desc: - - New Canon DR-series backend v3 - - support all modes and resolutions of DR-9080C - - advanced options (MF detection, compression) not yet supported - - other larger models believed similar, smaller ones unknown - * doc/descriptions/unsupported.desc: remove Canon DR-series machines - -2008-11-07 m. allan noah - * backend/fujitsu.c: backend v84 - - round lines down to even number to get even # of total bytes - - round binary bpl and Bpl down to byte boundary - -2008-11-06 m. allan noah - * backend/fujitsu.c: backend v83 - - round binary bpl and Bpl up to byte boundary - - use s->params instead of user data in set_window() - - read_from_scanner() only grabs an even number of lines - -2008-10-31 Louis Lagendijk - * Pixma backend (pixma.c/pixma_common.c/pixma_io_sanei.c/pixma_bjnp.c): - bjnp tcp connection is now de-activated after initialization and - re-activated at start of scanning. If we do not do this, the scanner - closes its side of the connection after 30 secods of inactivity. - Added a maximum to the retry of slect calls when signals are - received - Added blocksize detection for tcp read_bulk call - -2008-11-04 m. allan noah - * sanei/sanei_usb.c, include/sane/sanei_usb.h: - - shorten debug lines to fit in 80 chars - - add sanei_usb_clear_halt() required by upcoming canon_dr backend - -2008-10-31 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h, - backend/fujitsu.conf.in, doc/descriptions/fujitsu.desc: backend v82 - - improved front-side endorser vpd detection - - send scanner_control_ric during sane_read of each side - - add fi-6770A and fi-6670A USB ID's - -2008-10-31 Louis Lagendijk - * backend/pixma_bjnp.c: corrected small typo - -2008-10-31 Louis Lagendijk - * backend/pixma_bjnp.c: - Added retry to select() calls when they get interrupted by a - signal. This solves problems in xsane after a first scan completed. - There is still an issue that scanner closes tcp connection after - 30 seconds of inactivity - backend/pixma_bjnp.c backend/bjnp_private.h - Marked local functions as static and removed them from ..private.h - -2008-10-31 Stéphane Voltz - * backend/rts8891.c backend/rts8891_low.c backend/rts8891_low.h: - added 600 and 1200 dpi scan for HP4400 and HP4470 with 'xpa' - sensor. - -2008-10-25 Nicolas Martin - * backend/pixma_mp150.c, doc/sane-pixma.man doc/descriptions/pixma.desc: - Tweaks for TPU scan at 4800 dpi, and MP810 at 2400 dpi (now works). - Updated docs around that. - -2008-10-25 Louis Lagendijk - * Added configuration file support for pixma backend - Currently used only for configuration of network scanners. - -2008-10-22 Nicolas Martin - * backend/pixma.c, backend/pixma_io_sanei.c, backend/pixma_mp150.c: - TPU scanning in 48 bits mode now works fine on MP970, with Xsane or - scanimage. - Changed also minimum to 300 dpi for TPU scan, so that preview now works - in Xsane. - Added Legal paper dimensions (14") to ADF scan for MX850 and MX7600. - The rest is cosmetic only. - -2008-10-21 Louis Lagendijk - * Added #ifdef around defintions of MIN and MAX in pixma_common.h - - Re-enable includes in pixma_bjnp.c as they are needed on Freebsd - - Replaced getaddrinfo by gethostbyname in pixma_bjnp.c as this is - supported on OS/2 as well - -2008-10-21 m. allan noah - * doc/descriptions/fujitsu.desc: backend v81, fix fi-6240 usb id - -2008-10-20 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v81 - - increase USB timeouts - - enable get_pixelsize() to update scan params after set_window() - - remove even_scan_line hack - -2008-10-19 Nicolas Martin - * configure.in, configure, backend/pixma_bjnp.c, - backend/pixma_bjnp.h, backend/pixma_bjnp_private.h, - pixma.h, doc/descriptions/pixma.desc: - From Louis Lagendijk for bjnp protocol on pixma backend, add a header - check for ifaddrs.h (necessary on different platforms BeOS, OS/2, ...) - Increment pixma backend version number. - -2008-10-15 Stéphane Voltz - * backend/rts8891.c: added 300 dpi scan for HP4400 - -2008-10-15 Stéphane Voltz - * backend/rts8891.c: fixed HP4400 sensor detection, added 150 - dpi scan mode for HP4400 - -2008-10-14 Nicolas Martin - * backend/pixma*.c, backend/pixma*.h (all pixma backend files), - doc/sane-pixma.man, doc/description/pixma.desc, - backend/Makefile.in - Added 3 new files backend/pixma_bjnp.c, backend/pixma_bjnp.h, - backend/pixma_bjnp_private.h: - - Thanks to Louis Lagendijk, added an implementation of Canon's BJNP - network protocol to the pixma backend, for scanning with PIXMA devices - over a LAN network. - - Fix for ADF scan reset session when ADF is loaded with more pages - to scan than the frontend requests. - - Updated pixma backend documentation and file headers. - -2008-10-09 m. allan noah - * doc/descriptions/fujitsu.desc, doc/sane-fujitsu.man: backend v80 - -2008-10-08 m. allan noah - * backend/fujitsu.c: backend v80 - - front-side endorser uses data ID 0x80 - -2008-10-06 Stéphane Voltz - * backend/rts8891.c backend/rts8891.h: fixed configuration option - bug - -2008-10-04 Nicolas Martin - * backend/pixma.c, backend/pixma.h, backend/pixma_common.c, - backend/pixma_io_sanei.c, backend/pixma_mp150.c, - doc/sane-pixma.man, doc/description/pixma.desc: - MP970 scanning improvements, up to 4800 dpi. On the way soon, - network BJNP protocol designed by Louis Lagendijk to be added to CVS. - MX7600 reported to work fine with the backend. - ADF scanning: - - improved for latest PIXMAs like MX850, MX310. - - bug fix in Sane_start, when scanning several pages with ADF. - ADF DUPLEX scanning: - - new code for ADF Duplex, (to be tested) based on a MX850 Snoop. Changes - might fit also MP830 (To be confirmed). - TPU scanning: - - MP970 TPU scanning: Protocol works, get scanned TPU images with 48 bits - to 24 bits conversion, full 48 bit version yet to be debugged. - -2008-10-03 m. allan noah - * backend/epjitsu.[ch]: backend v17: - - increase scan height ~1/2 inch due to head offset - - change page length autodetection condition - -2008-10-03 Stéphane Voltz - * include/sane/sane.h: added a SANE_CURRENT_MINOR define - -2008-10-02 Stéphane Voltz - * backend/rts8891.c backend/rts8891.h backend/rts8891_low.h: - add a 'sensornumber' option to override detected sensor model - -2008-10-02 m. allan noah - * doc/descriptions-external/epkowa.desc: - - iscan 2.12.0 updates from olaf.meeuwissen@avasys.jp - -2008-10-01 m. allan noah - * doc/descriptions/fujitsu.desc, backend/fujitsu.conf.in, - backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v79 - - add usb ids for several models - - print additional hardware capability bits - - detect front-side endorser - - disable endorser-side controls if only one side installed - - add quirks for fi-6x70 - -2008-10-01 m. allan noah - * backend/epjitsu.[ch]: backend v16: - - split fill_frontback_buffers_S300 into 3 functions - - enable threshold-curve option - - add 1-D dynamic binary thresholding code - - remove y-resolution option - - pad 225x200 data to 225x225 - -2008-10-01 Gerhard Jaeger - * doc/descriptions/plustek.desc: Added entry for UT12 devid 0x0013 - * doc/descriptions/unsupported.desc: Removed entry for UT12 devid 0x0013 - * doc/descriptions/gt68xx.desc: Added entry for OpticSlim 2400plus - * backends/gt68xx.conf.in: Added entry for OpticSlim 2400plus - -2008-09-26 Stéphane Voltz - * backend/rts8891_low.c: fix HP4400 head parking - -2008-09-25 m. allan noah - * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - - add working page-height control - - add working brightness, contrast and threshold controls - - add disabled threshold curve and geometry controls - - move initialization code to sane_get_devices, for hotplugging - - support S300 on USB power - - support S300 225x200 and 600x600 scans - - support for automatic paper length detection (parm.lines = -1) - - expose hardware buttons/sensors as options for S300 - * doc/descriptions/epjitsu.desc: change S300 status to good - -2008-09-25 m. allan noah - * include/sane/saneopts.h: underscore not allowed in option names - * frontend/scanimage.c: fix broken unknown length (-1) binary scans, - fix invalid tiff height with unknown length scans, fix compiler warn - -2008-09-20 Stéphane Voltz - * backend/rts8891.c: fix typo in HP4400 variant detection - -2008-09-20 Stéphane Voltz - * backend/rts8891.c backend/rts8891_low.c backend/rts8891_low.h: more - fix for HP4400 head parking, 75 dpi support for another HP4400 sensor - variant, better variant detector and initial setting - -2008-09-13 Nicolas Martin - * backend/pixma_mp150.c, doc/sane-pixma.man, doc/description/pixma.desc: - Changes in pixma backend for PIXMA MP970 at 4800 dpi (to be continued). - Declare MX7600 but yet untested. - -2008-09-11 Stéphane Voltz - * backend/rts8891.c backend/rts8891_low.c backend/rts8891_low.h: fix - parking for HP4400, tune dark calibration for HP4400 - -2008-09-07 Nicolas Martin - * backend/pixma_mp150.c backend/pixma_imageclass.c backend/pixma_common.h - doc/sane-pixma.man doc/descriptions/pixma.desc: - - Updated doc for MF4140, MF4150 and MP810 - - Remove white lines previously padded to image bottom for CCD sensors - - Modified scan area adjustments to enhance frontend area selection fit - but to be confirmed that it does not bring backward compatibility issues. - -2008-09-03 Stéphane Voltz - * backend/rts8891.c backend/rts8891_low.c backend/rts8891_low.h - backend/rts88xx_lib.c: minor changes for hp4400 support - -2008-09-02 Nicolas Martin - * backend/pixma_mp150.c: - Some tweaks to have PIXMA MP810 supported by the pixma backend. - -2008-08-29 Stéphane Voltz - * backend/genesys.c backend/genesys_gl646.c backend/genesys_devices.c: - - move to configuration framework - - fix GL646 GPO value usage - - HP2400/G2410 tidbits - - don't reset ASIC anymore - -2008-08-27 m. allan noah - * doc/descriptions/fujitsu.desc: mark fi-6230 and fi-6240 complete - -2008-08-26 m. allan noah - * backend/fujitsu.c, doc/descriptions/fujitsu.desc: backend v78 - - recent model names (fi-6xxx) dont end in 'C' - - simplify flatbed area overrides - - call scanner_control to change source during sane_start - -2008-08-26 m. allan noah - * backend/fujitsu.c, backend/fujitsu-scsi.h: backend v77 - - override flatbed maximum area for fi-6230C and fi-6240C - - set PF bit in all mode_select(6) CDB's - - set SANE_CAP_INACTIVE on all disabled options - - fix bug in mode_select page for sleep timer - -2008-08-25 Gerhard Jaeger - * backend/plustek-usb.c backend/plustek-usbdevs.c: - Added preliminary support for Visioneer XP100 - Tweaked entry for LM9831 version of Plustek UT12 - * backend/plustek.c: Bumped build number - * doc/sane-plustek.man doc/plustek/Plustek-USB.changes: Update - * doc/descriptions/plustek.desc: Added entry for Strobe XP100 - * doc/descriptions/unsupported.desc: Removed entry for Strobe XP100 - -2008-08-21 Stéphane Voltz - * backend/rts8891.c: calibration updating and 75 dpi scan for hp400 - -2008-08-23 m. allan noah - * doc/descriptions/fujitsu.desc: set lots of scanners to complete :) - -2008-08-21 Stéphane Voltz - * backend/rts8891.c backend/rts8891_devices.c backend/rts8891_low.c - backend/rts88xx_lib.c: add sensor type field and use it in geometry - detection. - -2008-08-14 Stéphane Voltz - * backend/rts8891.c backend/rts88xx_lib.c: fix for hp4400 init - -2008-08-13 m. allan noah - * backend/fujitsu.[ch]: backend v76 - - add independent maximum area values for flatbed - - override said values for fi-4220C, fi-4220C2 and fi-5220C - * doc/descriptions/fujitsu.desc: bump version, add 2 untested scanners - -2008-08-07 Rene Rebe - * backend/fujitsu.c, backend/fujitsu.conf.in, - doc/descriptions/fujitsu.desc: backend v75 - - added fi-6230 ID, updated fi-6130, fi-6230 status - -2008-08-05 Julien Blache - * frontend/saned.c: initialize runas_{u,g}id to 0 instead of -1; - initialize ngroups to 0. - -2008-08-04 Julien Blache - * frontend/scanimage.c: fetch_options(), actually get option - descriptor 0 before attempting to get the value of option 0. - -2008-08-04 Stéphane Voltz - * backend/umax_pp.c backend/umaxp_pp.h backend/umax_pp.conf.in: - use configuration framework - -2008-08-02 m. allan noah - * backend/fujitsu.c, backend/fujitsu-scsi.h: backend v74 - - replace global scsi blocks with local ones in each function - -2008-07-31 Julien Blache - * frontend/saned.c: set supplemental group list in addition to - setting euid and egid. Reported by Cameron Hutchison. - -2008-07-28 Julien Blache - * frontend/saned.c: call setegid() before seteuid(), aka while - we're still root. Patch from Nick Andrew . - -2008-07-27 m. allan noah - * backend/fujitsu.c, backend/fujitsu.conf.in, - doc/descriptions/fujitsu.desc: backend v73 - - add fi-6130 usb ID - - correct overscan dimension calculation - - provide correct overscan size overrides for fi-5110C and fi-4x20C2 - - fi-5750C can't handle 10 bit LUT via USB - -2008-07-25 m. allan noah - * AUTHORS: Earle has commit perms - * doc/descriptions/unsupported.desc: add Lexmark X7170 - * include/sane/sanei_config.h: remove typedef so doxygen will shutup - -2008-07-25 m. allan noah - * include/sane/saneopts.h: separate x-resolution from resolution - * backend/abaton.c, backend/artec.c, backend/canon-sane.c, - backend/epjitsu.c, backend/fujitsu.c, backend/microtek2.c, - backend/sp15c.c, backend/umax.c: use SANE_NAME_SCAN_RESOLUTION - instead of SANE_NAME_SCAN_X_RESOLUTION, to avoid ui change - -2008-07-20 Julien Blache - * backend/net.c: sane_control_option: when the frontend doesn't - care (info == NULL) and the remote backend asks for a reload, - perform the reload. Hopefully this brings the behaviour back in - line with standard backends. - -2008-07-15 Nicolas Martin - * backend/pixma_mp150.c: - Changed page scan end condition to handle correctly PIXMA ADF. - -2008-07-14 Julien Blache - * doc/*.man: Fix hyphen vs. minus sign issues in the manpages, - breaking copy/paste of command-lines and options in UTF-8 - environments. - -2008-07-13 m. allan noah - * backend/fujitsu.[ch]: backend v72, - - use mode_sense to determine background color support - - remove fi-5900 background color override - -2008-07-13 m. allan noah - * backend/fujitsu.[ch]: backend v71, - - disable overscan option if vpd does not tell overscan size - - fi-5110EOX crops scan area based on absolute maximum, not paper - - fi-5330C and fi-5650C can't handle 10 bit LUT via USB - - fi-5900 has background color, though it reports otherwise - -2008-07-10 Stéphane Voltz - * sanei/sanei_config.c: handle cases where config or callback - function is NULL - * backend/rts8891.c: use new configuration parsing framework - -2008-07-10 Stéphane Voltz - * include/sane/sanei_config.h: doxygen fix for new function - -2008-07-10 Stéphane Voltz - * backend/sanei_constrain_value.c: add support for SANE_Bool - in sanei_check_value - * backend/Makefile.in: add sanei_constrain_value.lo to libsane -2008-07-10 Stéphane Voltz - * backend/sanei_constrain_value.c: add support for SANE_Bool - in sanei_check_value - * backend/Makefile.in: add sanei_constrain_value.lo to libsane - dependencies - * sanei/Makefile.in: add makedepend for .lo files - * include/sane/sanei_config.h sanei/sanei_config.c: add configuration - parsing framework - -2008-07-05 m. allan noah - * backend/fujitsu.[ch]: backend v70, - - fix bug in sane_get_parameters (failed to copy values) - - autodetect jpeg duplex interlacing mode by inspecting scan width - -2008-07-05 Nicolas Martin - * backend/pixma.c: - Fix in sane_control_option () for PIXMA ADF scan. - Change malformed test conditions for ADF/Duplex scan source. - Updated PIXMA MX850 description. - -2008-07-03 m. allan noah - * backend/fujitsu.[ch]: backend v69, support hot-unplugging scanners - -2008-07-02 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v68, - - add halftone type and pattern options - - support M3097G with IPC and CMP options via modified VPD response - * doc/descriptions/fujitsu.desc, doc/sane-fujitsu.man: backend v68, - - manpage cleanup - -2008-07-01 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v67, - - add IPC/DTC/SDTC options - - call check_for_cancel() in sane_cancel, unless reading flag is set - -2008-06-28 Nicolas Martin - * backend/pixma_mp150.c: - Removed "experimental" flag for PIXMA MX850. - -2008-06-26 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v66, - - restructure double feed detection options for finer-grained control - - add endorser side option - - prevent init_interlace() from overriding init_model() - - simplify sane_start() and fix interlaced duplex jpeg support - - simplify sane_read() and add non-interlaced duplex jpeg support - - removed unused code - -2008-06-26 m. allan noah - * backend/test.[ch]: check for options being controlled before loading - -2008-06-25 Nicolas Martin - * backend/pixma_imageclass.c: - Patch from Sam Varshavchik to deal with libusb 64 read issue, - for ImageClass MFPs. - -2008-06-24 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h, - doc/descriptions/fujitsu.desc, doc/sane-fujitsu.man: - backend version 65, add endorser support, add quirks for fi-4990 - -2008-06-24 Julien Blache - * backend/net.c: do not reload options behind the frontend's back - in sane_control_option; rather return SANE_STATUS_INVAL and warn - that the frontend is buggy. Fetch option descriptors in - sane_open() so a GET_VALUE on option 0 can still work without - having to get option descriptor 0 beforehand. - * frontend/saned.c: rework error/exit path in process_request() - to properly terminate the Avahi thread when in debug mode. - -2008-06-22 Julien Blache - * frontend/saned.c: terminate child processes before exiting in - debug mode. - -2008-06-19 Ilia Sotnikov - * backend/hp5590.c: - Fixed segmentation fault on invalid option passed to - sane_get_option_descriptor(), sane_control_option() - (thanks to Albert Cervera i Areny) - -2008-06-19 Ilia Sotnikov - * backend/hp5590.c, backend/hp5590_cmds.c, backend/hp5590_cmds.h - * backend/hp5590_low.c, backend/hp5590_low.h - * doc/descriptions/hp5590.desc, doc/sane-hp5590.man: - Added support for HP ScanJet 4570c (thanks to Markham Thomas) - -2008-06-15 Nicolas Martin - * doc/sane-pixma.man, - * backend/pixma.c, backend/pixma_mp150.c, backend/pixma_sane_options.c - * sane-backends/po/sane-backends.??.po: - Remove "experimental" in pixma buttons options and text. - Fix some French translation typos, and update man page. - -2008-06-10 Stéphane Voltz - * backend/sanei_constrain_value.c: add support for arrays of SANE_Word - in sanei_constrain_value - * backend/umax_pp.c: remove now unneede 'hand made' constrain on - gamma tables - -2008-06-09 Stéphane Voltz - * backend/rts8891.c: fix for model with 'XPA' sensor - -2008-06-06 Julien Blache - * backend/net.c: lock the Avahi thread before stopping it and - tearing down the Avahi objects. - -2008-06-03 Stéphane Voltz - * backend/genesys_gl646.c: fixed wrong offset for start - of scanarea for MD6471 scanner. - -2008-05-30 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h, - doc/descriptions/fujitsu.desc: backend version 64, - use model and serial to build sane.name (idea from Ryan Duryea), - allow both serial_name and device_name to sane_open scanner, - simulate missing VPD data for M3097G, probe scanner for color - interlacing mode instead of hardcoding, other minor cleanups - -2008-05-29 Nicolas Martin - * doc/sane-pixma.man: man update. - * backend/pixma_io_sanei.c: update status types, and take into - account new ones. - -2008-05-15 Mattias Ellert - * backend/hp3900_sane.c: Correct typos. - * po/Makefile.in: add backend/rts8891.c to localization. - * po/sane-backends.sv.po: update Swedish localization. - -2008-05-27 m. allan noah - * frontend/scanimage.c: add %n for newline to -f option - -2008-05-26 Jonathan Bravo Lopez - * po/sane-backends.es.po: added spanish translation about status strings - * po/Makefile.in: added backend/sane_strstatus.c to SRC_FILES section. - -2008-05-26 Rene Rebe - * backend/avision.{c,h}: merged latest upstream SVN changes, bug fixes - and device ID updates, including fixing uninitialized variables due - former defect merge and exposure control for film / dia scanners - -2008-05-26 Stéphane Voltz - * backend/sane_strstatus.c: added new status and internationalization - support - * frontend/scanimage.c, frontend/tstbackend.c: added handling of status - SANE_STATUS_WARMING_UP - * backend/pnm.c: added 2 more virtual devices, one that is hardware - locked, and another that always do warming before scan. - -2008-05-26 Stéphane Voltz - * backend/rts8891.[ch], backend/rts8891_low.[ch], - backend/rts88xx_lib.[ch]: renamed per frontend struct, made use of - new well-known option groups. Added warming-up handling in - sane_start(). - -2008-05-22 Stéphane Voltz - * backend/genesys.c: - changed top of scan area detection for MD6228/MD6471 models - -2008-05-23 Jonathan Bravo Lopez - * backend/hp3900_sane.c: setting appropiate capabilities to some options. - -2008-05-22 Jonathan Bravo Lopez - * backend/hp3900_sane.c: use 1.1.0 well-known option group strings. - * backend/hp3900_config.c, backend/hp3900_debug.c, - backend/hp3900_rts8822.c, backend/hp3900_types.c, - backend/hp3900_usb.c: Fixed reference position detection for - HP3800/HPG2710 scanners. Code clean up. - -2008-05-22 Stéphane Voltz - * backend/rts8891.c: - minor tweak for scanjet 4470cx - -2008-05-21 m. allan noah - * include/sane/saneopts.h: add sane 1.1.0 well-known button options - * backend/fujitsu.c: v1.0.63, use sane 1.1.0 well-known option - names for some buttons, remove 'button-' from others - -2008-05-20 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: v1.0.62, - check for all supported scsi commands, use well-known option - group strings from saneopts.h, rename pagewidth to page-width - to meet sane 1.1.0 spec, same for height, add unused get_window() - * doc/descriptions/fujitsu.desc: increase version to 1.0.62. - -2008-05-20 m. allan noah - * include/sane/sane.h: add SANE_STATUS_WARMING_UP and - SANE_STATUS_HW_LOCKED, remove SANE_CAP_ALWAYS_SETTABLE, - add SANE_FRAME_XML, improve comments on other new frame types. - * include/sane/saneopts.h: add common option groups, add new - page-width and page-height well-known options - -2008-05-20 m. allan noah - * backend/qcam.c, backend/v4l.c, frontend/tstbackend.c: - remove undocumented and otherwise unused SANE_CAP_ALWAYS_SETTABLE - -2008-05-19 Stéphane Voltz - * backend/rts8891.c: - 150/300 dpi shading calibration fixes for 'XPA' sensor HP4470 models - -2008-05-16 m. allan noah - * backend/fujitsu.c: inspect correct bool to enable prepick mode - -2008-05-15 m. allan noah - * doc/descriptions/cardscan.desc, doc/descriptions/epjitsu.desc, - doc/descriptions/hp3900.desc, doc/descriptions/hp5590.desc, - doc/descriptions/hpljm1005.desc, doc/descriptions/hs2p.desc: - remove 'new' tag from sane 1.0.19 backends - * doc/descriptions/fujitsu.desc, backend/fujitsu.conf.in: - add fi-5530C2 usb ID - * backend/cardscan.c: correct version number - * backend/epjitsu.conf.in: improved firmware directions - * backend/fujitsu.[ch]: update to backend v 1.0.61 - -2008-05-15 Mattias Ellert - * doc/sane-genesys.man, doc/sane-lexmark.man, doc/sane-microtek2.man, - doc/sane-mustek_pp.man, doc/sane-pixma.man, doc/sane-rts8891.man, - doc/sane-umax_pp.man: Man page fixes - * doc/descriptions-external/hp_rts88xx.desc: removed since its - successor rts8891 is now included in the SANE distribution - -2008-05-15 Mattias Ellert - * backend/agfafocus.h, backend/artec_eplus48u.c, - backend/artec_eplus48u.h, backend/avision.h, backend/coolscan.h, - backend/hp-handle.c, backend/hp3500.c, backend/microtek2.h, - backend/mustek.c, backend/mustek.h, backend/pie.c, backend/pixma.c, - backend/plustek-pp.h, backend/plustek.c, backend/plustek.h, - backend/plustek_pp.c, backend/snapscan.c, backend/snapscan.h, - backend/sp15c.h, backend/tamarack.h, backend/test.c, backend/test.h, - backend/u12.c, backend/u12.h, backend/umax.c, backend/umax.h, - include/sane/sanei_thread.h, sanei/sanei_thread.c: - Fix for bug #306751: sanei-thread with pthreads on 64 bit - -2008-05-12 Stéphane Voltz - * backend/rts8891.c - 150/300 dpi mode fixes for 'XPA' sensor HP4470 models - -2008-05-08 Alessandro Zummo - * AUTHORS: added myself :) - -2008-05-07 Julien Blache - * doc/sane-config.man: Fix man warning. - * backend/dll.c: look for dll.conf snippets in - $configdir/dll.d; this is a facility for external backends - to automatically add their backends to the dll backend - configuration without mucking with dll.conf. - * backend/Makefile.in: create $configdir/dll.d. - -2008-05-07 Nicolas Martin - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc: - USB IDs updates in imageClass backend (pixma), by Dennis Lou. - -2008-05-07 Jochen Eisinger - * doc/sane-mustek_pp.man: fix catman warning. Reported by - Raymond Chen. - -2008-05-05 Earle Philhower - * doc/sane-sm3840.man: Add lineart and halftone options to page - * backend/sm3840*: Remove 64-bit compile warnings - -2008-04-05 Stéphane Voltz - * backend/rts8891.c backend/rts8891_low.c - doc/descriptions/rts8891.desc: - 150 dpi mode fix for 'XPA' sensor HP4470 models, description - update - -2008-05-05 Nicolas Martin - * doc/sane-pixma.man, doc/descriptions/pixma.desc: - Description and man updates for PIXMA MX300. - -2008-05-04 Nicolas Martin - * backend/pixma_imageclass.c, doc/descriptions/pixma.desc: - Code cleanup patch to imageClass backend (pixma) by Dennis Lou. - -2008-05-03 Julien Blache - * backend/epson2.c: initialize s->fd to -1 once the struct - Epson_Scanner is allocated and zeroed out in attach(). Otherwise - the backend sends inquiry data to fd 0, which it obviously - shouldn't do; this breaks scanning over saned. - * doc/net.tex: replace occurrences of SANE_STATUS_SUCCESS with - SANE_STATUS_GOOD, as SANE_STATUS_SUCCESS doesn't exist. - -2008-04-28 m. allan noah - * backend/epjitsu.[ch]: backend v1.0.12, fix double free bug - -2008-04-27 m. allan noah - * sanei/sanei_usb.c: allow sanei_usb_init() to run once per second - * backend/fujitsu.c: backend v1.0.60, relocate call to sanei_usb_init(), - free sane_devArray before calloc'ing a new one - -2008-04-22 m. allan noah - * backend/fujitsu.c, backend/fujitsu.conf.in: backend v1.0.59, - add fi-6140 PID, and fi-6x40 color mode - * doc/descriptions/fujitsu.desc: add fi-6140 PID, mark as 'good' - * doc/descriptions/epjitsu.desc: add S300M, mark as 'untested' - -2008-04-22 Nicolas Martin - * backend/pixma_mp150.c: - Updated pixma backend to have MP970 (tested), and probably other - CCD sensor MPs, working for Grayscale scan. - -2008-04-21 Nicolas Martin - * backend/pixma.c, backend/pixma_common.c, backend/pixma_rename.h - doc/sane-pixma.man, doc/descriptions/pixma.desc - (new) backend/pixma_imageclass.c, backend/Makefile.in: - Thanks to Dennis Lou, who adapted the pixma backend to add support - for Canon ImageCLASS series, fully tested for MF4270, and includes - PIDs declarations for other ImageCLASS devices, yet to be tested. - Fixes also a bug for ADF and ADF Duplex scan source selection. - -2008-04-20 m. allan noah - * backend/fujitsu.h: remove #define SANE_FRAME_JPEG - -2008-04-19 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v1.0.58, - rename page code 32 to 'unknown', compile if NDEBUG is set, - proper async sane_cancel support, re-enable JPEG support - various functions rewritten (shorter, more clear) - * doc/descriptions/fujitsu.desc: add new fi-6xxx machines - -2008-04-18 Alessandro Zummo - * backend/epson2.c: fixed attach() error path. - -2008-04-14 Nicolas Martin - * backend/pixma_mp150.c, backend/pixma.h, backend/pixma_mp150.c - doc/sane-pixma.man, doc/descriptions/pixma.desc: - With feedback from MP970 owner, updated pixma backend for MP970 - CCD sensor support (yet in color only), and more generally, - support for other CCD sensor PIXMA: MP800, MP810, MP830, MP960, - but yet untested, which produce shifted color planes - scanned images. Current trim based on sample images provided - in bug reports and other web pages, but might require some - few and simple final tweaks. - Also fixed a bug for MP220 at 1200 dpi, MP220 is now reported - to work fine. - -2008-04-13 Julien Blache - * frontend/saned.c: fix typo. - * backend/net.c: plug an information leak in the net backend. When - sending out a SANE_NET_CONTROL_OPTION RPC for the - SANE_ACTION_GET_VALUE action (and SANE_ACTION_SET_AUTO for the - network protocol versions < 3), the backend was not clearing the - memory area for the value argument before sending it over the - network, resulting in an information leak for the - SANE_ACTION_GET_VALUE case. - -2008-04-12 Mattias Ellert - * backend/rts8891.c, backend/rts88xx_lib.c: fix format warning - * doc/sane-rts8891.man: man page fixes - * AUTHORS: e-mail update - -2008-04-11 Julien Blache - * frontend/saned.c: announce the _sane-port._tcp service via mDNS - (Avahi) when running in standalone or debug mode. A separate - process is responsible for the announcement through Avahi. - * backend/net.c: look for _sane-port._tcp service announcements - via mDNS (Avahi). A separate thread listens to announcements - through Avahi. Start the thread as early as possible in - sane_init() so as to get as much data as possible until - sane_get_devices() is called. - * aclocal.m4, configure, configure.in, include/sane/config.h.in: - add autofoo stuff for Avahi support, disabled by default. - -2008-04-10 Julien Blache - * frontend/saned.c: do not use daemon(), as it's a 4.4BSD/glibc - function; OS/2 for instance does not have it. Use an open-coded - equivalent. Add a PID file. saned -a username now drops privileges -2008-04-22 Nicolas Martin - * backend/pixma.c, backend/pixma_common.c, backend/pixma_rename.h - doc/sane-pixma.man, doc/descriptions/pixma.desc - (new) backend/pixma_imageclass.c, backend/Makefile.in: - Thanks to Dennis Lou, who adapted the pixma backend to add support - for Canon ImageCLASS series, fully tested for MF4270, and includes - PIDs declarations for other ImageCLASS devices, yet to be tested. - Fixes also a bug for ADF and ADF Duplex scan source selection. - -2008-04-20 m. allan noah - * backend/fujitsu.h: remove #define SANE_FRAME_JPEG - -2008-04-19 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v1.0.58, - rename page code 32 to 'unknown', compile if NDEBUG is set, - proper async sane_cancel support, re-enable JPEG support - various functions rewritten (shorter, more clear) - * doc/descriptions/fujitsu.desc: add new fi-6xxx machines - -2008-04-18 Alessandro Zummo - * backend/epson2.c: fixed attach() error path. - -2008-04-14 Nicolas Martin - * backend/pixma_mp150.c, backend/pixma.h, backend/pixma_mp150.c - doc/sane-pixma.man, doc/descriptions/pixma.desc: - With feedback from MP970 owner, updated pixma backend for MP970 - CCD sensor support (yet in color only), and more generally, - support for other CCD sensor PIXMA: MP800, MP810, MP830, MP960, - but yet untested, which produce shifted color planes - scanned images. Current trim based on sample images provided - in bug reports and other web pages, but might require some - few and simple final tweaks. - Also fixed a bug for MP220 at 1200 dpi, MP220 is now reported - to work fine. - -2008-04-13 Julien Blache - * frontend/saned.c: fix typo. - * backend/net.c: plug an information leak in the net backend. When - sending out a SANE_NET_CONTROL_OPTION RPC for the - SANE_ACTION_GET_VALUE action (and SANE_ACTION_SET_AUTO for the - network protocol versions < 3), the backend was not clearing the - memory area for the value argument before sending it over the - network, resulting in an information leak for the - SANE_ACTION_GET_VALUE case. - -2008-04-12 Mattias Ellert - * backend/rts8891.c, backend/rts88xx_lib.c: fix format warning - * doc/sane-rts8891.man: man page fixes - * AUTHORS: e-mail update - -2008-04-11 Julien Blache - * frontend/saned.c: announce the _sane-port._tcp service via mDNS - (Avahi) when running in standalone or debug mode. A separate - process is responsible for the announcement through Avahi. - * backend/net.c: look for _sane-port._tcp service announcements - via mDNS (Avahi). A separate thread listens to announcements - through Avahi. Start the thread as early as possible in - sane_init() so as to get as much data as possible until - sane_get_devices() is called. - * aclocal.m4, configure, configure.in, include/sane/config.h.in: - add autofoo stuff for Avahi support, disabled by default. - -2008-04-10 Julien Blache - * frontend/saned.c: do not use daemon(), as it's a 4.4BSD/glibc - function; OS/2 for instance does not have it. Use an open-coded - equivalent. Add a PID file. saned -a username now drops privileges - and runs as the given user (and group). - * doc/saned.man: document -a username. - -2008-04-06 Nicolas Martin - * backend/pixma_mp150.c: - Modifications for PIXMA MP970, to manage the CCD sensor - with PIXMA generation 3 protocol. To be tested. - -2008-04-06 Julien Blache - * frontend/saned.c: add standalone daemon mode, building upon the - AF-indep/IPv6 debug mode. Reorganize code by splitting the main() - function into a series of functions. Factorize common code between - the old network code and the AF-indep code. There's now only one - version of main(). - * doc/saned.man: document new -a flag, reorganize manpage - sections (separate inetd configuration under the INETD - CONFIGURATION section). - -2008-04-05 Stéphane Voltz - * backend/genesys.c backend/genesys.h backend/genesys_devices.c - backend/genesys_gl646.c backend/genesys_low.h: - Fixed double free problems, made OPT_COLOR_FILTER work for - GL646 scanners, added OPT_CUSTOM_GAMMA and OPT_GAMMA_VECTOR* - options, split sane_control_options to make it more readable, - fixed 'reset stream' problem for MD6471. - -2008-04-05 Stéphane Voltz - * backend/rts8891.c: - split sane_control_option() to make it more readable - -2008-04-02 Nicolas Martin - * backend/pixma_mp150.c, backend/pixma.c, doc/sane-pixma.man, - doc/descriptions/pixma.desc: - Added a 10s tempo before "NO PAPER" fail message appears in ADF scan, - declared PIXMA MX850, moved MP970 to Generation 3 protocol, but yet - untested. - -2008-03-28 Julien Blache - * sanei/sanei_usb.c, include/sane/sanei_usb.h: add - sanei_usb_get_vendor_product_byname(). - * backend/snapscan-mutex.c: do not use ftok() in - snapscani_mutex_open(); ftok() will fail with anything for which - the devicename is not a filename. Construct an IPC key based on - the product ID, bus number and device number for libusb devices, - otherwise fallback to ftok() and check its return value. - * tools/sane-desc.c: HAL 0.5.11-rc2 does not support the info.bus - property anymore; superseded by info.subsystem. Unfortunately, - this is not backward-compatible, so add a new "hal-new" mode to - sane-desc. - -2008-03-28 m. allan noah - * backend/hp-scl.c: add usleep to improve usb performance, from - jim a t meyering d o t net - -2008-03-28 m. allan noah - * sanei/sanei_usb.c: add usb class 6 (imaging) to detected devices - * sanei/sanei_scsi.c: fix bug in sanei_scsi_find_devices() which - caused early return if attach callback returned error. - -2008-03-22 Stéphane Voltz - * AUTHORS configure configure.in backend/dll.conf.in - backend/Makefile.in backend/rts8891.c backend/rts8891.conf.in - backend/rts8891_devices.c backend/rts8891.h backend/rts8891_low.c - backend/rts8891_low.h backend/rts88xx_lib.c backend/rts88xx_lib.h - doc/descriptions/rts8891.desc doc/descriptions/unsupported.desc - doc/sane-rts8891.man: - rts8891 backend inclusion - -2008-03-20 Julien Blache - * include/Makefile.in: remove _stdint.h and byteorder.h in - distclean target, autogenerated cruft. - * frontend/saned.c: fix debug messages around the getservbyname() - call in the IPv4 code as it still referred to the "sane" port - instead of "sane-port". - -2008-03-16 Nicolas Martin - * backend/pixma_mp150.c, backend/pixma.h, doc/sane-pixma.man, - doc/descriptions/pixma.desc: - Changes to have new Canon PIXMA MX700 working with pixma backend - Flatbed and ADF scan are supported. - -2008-03-15 Julien Blache - * include/sane/sanei_usb.h: typo fix. - -2008-03-02 Stéphane Voltz - * doc/descriptions/lexmark.desc: added X1195 - * doc/descriptions/unsupported.desc: removed X11xx, X12xx and - Dell A920 which are to be handled by the lexmark backend - * backend/umax_pp.h backend/umax_pp.c backend/umax_pp_mid.h - backend/umax_pp_mid.c backend/umax_pp_low.h backend/umax_pp_low.c: - copyright notice update - -2008-03-01 Gerard klaver - * doc/descriptions/as6e.desc added Dexxa 4800 - -2008-02-26 Jonathan Bravo Lopez - * backend/hp3900_sane.c: Fixed optional grayscale emulation - * backend/hp3900_debug.c: Silence gcc warnings when tiffio.h - is not used - -2008-02-25 m. allan noah - * backend/fujitsu.[ch], backend/fujitsu-scsi.h: - add mode sense for page code 32 (color interlacing?) - and more debug output in init_ms(), for fi-5900 - -2008-02-24 Nicolas Martin - * backend/pixma_mp150.c, doc/sane-pixma.man, - doc/descriptions/pixma.desc: - Changes to have Canon PIXMA MP140 now working with pixma backend - -2008-02-23 Pierre Willenbrock - * backend/genesys_gl841.c: Make LEDs go really dark when "lamp" is off - -2008-02-22 Nicolas Martin - * backend/pixma_mp150.c, backend/pixma_mp730.c, - doc/sane-pixma.man, doc/descriptions/pixma.desc: - Changed MP140 to experimental cause not working yet - Changed MP710 to non-ADF scanner - -2008-02-22 Pierre Willenbrock - * backend/genesys_gl841.c: Fix debugging output of - gl841_bulk_write_register - -2008-02-21 Pierre Willenbrock - * backend/genesys.c, backend/genesys_gl646.c, - backend/genesys_gl841.c, backend/genesys_low.h: Add LED exposure - control to gl841_set_lamp_power - -2008-02-20 Pierre Willenbrock - * backend/genesys_gl841.c: Send 32 registers at once instead of 1 - -2008-02-20 Mattias Ellert - * backend/Makefile.in, ltmain.sh: Library version definition fixes - * backend/coolscan3.c: Fix format warnings - -2008-02-18 Alessandro Zummo - * backend/coolscan3.c: added new coolscan3 backend - with improved stability and infrared support. - * configure.in, include/sanei.h: bumped version - number to 1.1.0 and enabled 1.1 frame types. - - doc/sane-pixma.man, doc/descriptions/pixma.desc, - doc/descriptions-external/canon_mfp.desc: - > New models changes: - - added: Pixma MP210, MP470, MP520, MP610, MP710 - - declared but untested: Pixma MP140, MP220, MP740 - - declared experimental and untested: MP970 - > Bugs and fixes - - multipage documents scan no more fails in non-ADF scan - - IO Fail bug when scanning large pages e.g. with Xsane - - implement send_time message form MP710, MP730 family - - run indent -gnu on all pixma_* source files. - -2008-02-14 m. allan noah - * backend/cardscan.c, backend/epjitsu.c, backend/fujitsu.c: - sanei_read_config has already cleaned string, fix bug #310597 - -2008-02-13 Pierre Willenbrock - Patch by Stefan Lucke - * backend/genesys_gl841.c: Fixes 3 possibilities for infinite - loops and adjusts loop threshold to given comments - -2008-02-13 Jonathan Bravo Lopez - * backend/hp3900.c, backend/hp3900_debug.c, backend/hp3900_rts8822.c, - backend/hp3900_usb.c, backend/hp3900_sane.c, backend/hp3900_types.c, - backend/hp3900_config.c, backend/hp3900.conf.in, /doc/sane-hp3900.man, - doc/descriptions/hp3900.desc: Minor changes and added support for - HP ScanJet G2710 scanner. - -2008-02-10 m. allan noah - - * configure, configure.in: Changed version to 1.0.19-cvs. Enabled - compilation warnings. - * Makefile.in: Added ChangeLog-1.0.19 to DISTFILES. - -Older entries can be found in ChangeLog-1.0.19. -- cgit v1.2.3