From ffa8801644a7d53cc1c785e3450f794c07a14eb0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Sun, 2 Feb 2020 17:13:01 +0100 Subject: New upstream version 1.0.29 --- backend/genesys_gl841.cc | 5624 ---------------------------------------------- 1 file changed, 5624 deletions(-) delete mode 100644 backend/genesys_gl841.cc (limited to 'backend/genesys_gl841.cc') diff --git a/backend/genesys_gl841.cc b/backend/genesys_gl841.cc deleted file mode 100644 index 9e8fc15..0000000 --- a/backend/genesys_gl841.cc +++ /dev/null @@ -1,5624 +0,0 @@ -/* sane - Scanner Access Now Easy. - - Copyright (C) 2003 Oliver Rauch - Copyright (C) 2003, 2004 Henning Meier-Geinitz - Copyright (C) 2004 Gerhard Jaeger - Copyright (C) 2004-2013 Stéphane Voltz - Copyright (C) 2005 Philipp Schmid - Copyright (C) 2005-2009 Pierre Willenbrock - Copyright (C) 2006 Laurent Charpentier - Copyright (C) 2010 Chris Berry and Michael Rickmann - for Plustek Opticbook 3600 support - - - This file is part of the SANE package. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, - MA 02111-1307, USA. - - As a special exception, the authors of SANE give permission for - additional uses of the libraries contained in this release of SANE. - - The exception is that, if you link a SANE library with other files - to produce an executable, this does not by itself cause the - resulting executable to be covered by the GNU General Public - License. Your use of that executable is in no way restricted on - account of linking the SANE library code into it. - - This exception does not, however, invalidate any other reasons why - the executable file might be covered by the GNU General Public - License. - - If you submit changes to SANE to the maintainers to be included in - a subsequent release, you agree by submitting the changes that - those changes may be distributed with this exception intact. - - If you write modifications of your own for SANE, it is your choice - whether to permit this exception to apply to your modifications. - If you do not wish that, delete this exception notice. -*/ - -#define DEBUG_DECLARE_ONLY - -#include "genesys_gl841.h" - -#include - -/**************************************************************************** - Low level function - ****************************************************************************/ - -/* ------------------------------------------------------------------------ */ -/* Read and write RAM, registers and AFE */ -/* ------------------------------------------------------------------------ */ - -/* Set address for writing data */ -static SANE_Status -gl841_set_buffer_address_gamma (Genesys_Device * dev, uint32_t addr) -{ - SANE_Status status = SANE_STATUS_GOOD; - - DBG(DBG_io, "%s: setting address to 0x%05x\n", __func__, addr & 0xfffffff0); - - addr = addr >> 4; - - status = sanei_genesys_write_register (dev, 0x5c, (addr & 0xff)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed while writing low byte: %s\n", __func__, sane_strstatus(status)); - return status; - } - - addr = addr >> 8; - status = sanei_genesys_write_register (dev, 0x5b, (addr & 0xff)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed while writing high byte: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_io, "%s: completed\n", __func__); - - return status; -} - -/**************************************************************************** - Mid level functions - ****************************************************************************/ - -static SANE_Bool -gl841_get_fast_feed_bit (Genesys_Register_Set * regs) -{ - GenesysRegister *r = NULL; - - r = sanei_genesys_get_address (regs, 0x02); - if (r && (r->value & REG02_FASTFED)) - return SANE_TRUE; - return SANE_FALSE; -} - -static SANE_Bool -gl841_get_filter_bit (Genesys_Register_Set * regs) -{ - GenesysRegister *r = NULL; - - r = sanei_genesys_get_address (regs, 0x04); - if (r && (r->value & REG04_FILTER)) - return SANE_TRUE; - return SANE_FALSE; -} - -static SANE_Bool -gl841_get_lineart_bit (Genesys_Register_Set * regs) -{ - GenesysRegister *r = NULL; - - r = sanei_genesys_get_address (regs, 0x04); - if (r && (r->value & REG04_LINEART)) - return SANE_TRUE; - return SANE_FALSE; -} - -static SANE_Bool -gl841_get_bitset_bit (Genesys_Register_Set * regs) -{ - GenesysRegister *r = NULL; - - r = sanei_genesys_get_address (regs, 0x04); - if (r && (r->value & REG04_BITSET)) - return SANE_TRUE; - return SANE_FALSE; -} - -static SANE_Bool -gl841_get_gain4_bit (Genesys_Register_Set * regs) -{ - GenesysRegister *r = NULL; - - r = sanei_genesys_get_address (regs, 0x06); - if (r && (r->value & REG06_GAIN4)) - return SANE_TRUE; - return SANE_FALSE; -} - -static SANE_Bool -gl841_test_buffer_empty_bit (SANE_Byte val) -{ - if (val & REG41_BUFEMPTY) - return SANE_TRUE; - return SANE_FALSE; -} - -static SANE_Bool -gl841_test_motor_flag_bit (SANE_Byte val) -{ - if (val & REG41_MOTORENB) - return SANE_TRUE; - return SANE_FALSE; -} - -/** copy sensor specific settings */ -/* *dev : device infos - *regs : registers to be set - extended : do extended set up - half_ccd: set up for half ccd resolution - all registers 08-0B, 10-1D, 52-59 are set up. They shouldn't - appear anywhere else but in register_ini - -Responsible for signals to CCD/CIS: - CCD_CK1X (CK1INV(0x16),CKDIS(0x16),CKTOGGLE(0x18),CKDELAY(0x18),MANUAL1(0x1A),CK1MTGL(0x1C),CK1LOW(0x1D),CK1MAP(0x74,0x75,0x76),CK1NEG(0x7D)) - CCD_CK2X (CK2INV(0x16),CKDIS(0x16),CKTOGGLE(0x18),CKDELAY(0x18),MANUAL1(0x1A),CK1LOW(0x1D),CK1NEG(0x7D)) - CCD_CK3X (MANUAL3(0x1A),CK3INV(0x1A),CK3MTGL(0x1C),CK3LOW(0x1D),CK3MAP(0x77,0x78,0x79),CK3NEG(0x7D)) - CCD_CK4X (MANUAL3(0x1A),CK4INV(0x1A),CK4MTGL(0x1C),CK4LOW(0x1D),CK4MAP(0x7A,0x7B,0x7C),CK4NEG(0x7D)) - CCD_CPX (CTRLHI(0x16),CTRLINV(0x16),CTRLDIS(0x16),CPH(0x72),CPL(0x73),CPNEG(0x7D)) - CCD_RSX (CTRLHI(0x16),CTRLINV(0x16),CTRLDIS(0x16),RSH(0x70),RSL(0x71),RSNEG(0x7D)) - CCD_TGX (TGINV(0x16),TGMODE(0x17),TGW(0x17),EXPR(0x10,0x11),TGSHLD(0x1D)) - CCD_TGG (TGINV(0x16),TGMODE(0x17),TGW(0x17),EXPG(0x12,0x13),TGSHLD(0x1D)) - CCD_TGB (TGINV(0x16),TGMODE(0x17),TGW(0x17),EXPB(0x14,0x15),TGSHLD(0x1D)) - LAMP_SW (EXPR(0x10,0x11),XPA_SEL(0x03),LAMP_PWR(0x03),LAMPTIM(0x03),MTLLAMP(0x04),LAMPPWM(0x29)) - XPA_SW (EXPG(0x12,0x13),XPA_SEL(0x03),LAMP_PWR(0x03),LAMPTIM(0x03),MTLLAMP(0x04),LAMPPWM(0x29)) - LAMP_B (EXPB(0x14,0x15),LAMP_PWR(0x03)) - -other registers: - CISSET(0x01),CNSET(0x18),DCKSEL(0x18),SCANMOD(0x18),EXPDMY(0x19),LINECLP(0x1A),CKAREA(0x1C),TGTIME(0x1C),LINESEL(0x1E),DUMMY(0x34) - -Responsible for signals to AFE: - VSMP (VSMP(0x58),VSMPW(0x58)) - BSMP (BSMP(0x59),BSMPW(0x59)) - -other register settings depending on this: - RHI(0x52),RLOW(0x53),GHI(0x54),GLOW(0x55),BHI(0x56),BLOW(0x57), - -*/ -static void sanei_gl841_setup_sensor(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set * regs, - SANE_Bool extended, SANE_Bool half_ccd) -{ - DBG(DBG_proc, "%s\n", __func__); - - // that one is tricky at least - for (uint16_t addr = 0x08; addr <= 0x0b; ++addr) { - regs->set8(0x70 + addr - 0x08, sensor.custom_regs.get_value(addr)); - } - - // ignore registers in range [0x10..0x16) - for (uint16_t addr = 0x16; addr < 0x1e; ++addr) { - regs->set8(addr, sensor.custom_regs.get_value(addr)); - } - - // ignore registers in range [0x5b..0x5e] - for (uint16_t addr = 0x52; addr < 0x52 + 9; ++addr) { - regs->set8(addr, sensor.custom_regs.get_value(addr)); - } - - /* don't go any further if no extended setup */ - if (!extended) - return; - - /* todo : add more CCD types if needed */ - /* we might want to expand the Sensor struct to have these - 2 kind of settings */ - if (dev->model->ccd_type == CCD_5345) - { - if (half_ccd) - { - GenesysRegister* r; - /* settings for CCD used at half is max resolution */ - r = sanei_genesys_get_address (regs, 0x70); - r->value = 0x00; - r = sanei_genesys_get_address (regs, 0x71); - r->value = 0x05; - r = sanei_genesys_get_address (regs, 0x72); - r->value = 0x06; - r = sanei_genesys_get_address (regs, 0x73); - r->value = 0x08; - r = sanei_genesys_get_address (regs, 0x18); - r->value = 0x28; - r = sanei_genesys_get_address (regs, 0x58); - r->value = 0x80 | (r->value & 0x03); /* VSMP=16 */ - } - else - { - GenesysRegister* r; - /* swap latch times */ - r = sanei_genesys_get_address (regs, 0x18); - r->value = 0x30; - regs->set8(0x52, sensor.custom_regs.get_value(0x55)); - regs->set8(0x53, sensor.custom_regs.get_value(0x56)); - regs->set8(0x54, sensor.custom_regs.get_value(0x57)); - regs->set8(0x55, sensor.custom_regs.get_value(0x52)); - regs->set8(0x56, sensor.custom_regs.get_value(0x53)); - regs->set8(0x57, sensor.custom_regs.get_value(0x54)); - r = sanei_genesys_get_address (regs, 0x58); - r->value = 0x20 | (r->value & 0x03); /* VSMP=4 */ - } - return; - } - - if (dev->model->ccd_type == CCD_HP2300) - { - /* settings for CCD used at half is max resolution */ - GenesysRegister* r; - if (half_ccd) - { - r = sanei_genesys_get_address (regs, 0x70); - r->value = 0x16; - r = sanei_genesys_get_address (regs, 0x71); - r->value = 0x00; - r = sanei_genesys_get_address (regs, 0x72); - r->value = 0x01; - r = sanei_genesys_get_address (regs, 0x73); - r->value = 0x03; - /* manual clock programming */ - r = sanei_genesys_get_address (regs, 0x1d); - r->value |= 0x80; - } - else - { - r = sanei_genesys_get_address (regs, 0x70); - r->value = 1; - r = sanei_genesys_get_address (regs, 0x71); - r->value = 3; - r = sanei_genesys_get_address (regs, 0x72); - r->value = 4; - r = sanei_genesys_get_address (regs, 0x73); - r->value = 6; - } - r = sanei_genesys_get_address (regs, 0x58); - r->value = 0x80 | (r->value & 0x03); /* VSMP=16 */ - return; - } -} - -/** Test if the ASIC works - */ -/*TODO: make this functional*/ -static SANE_Status -sanei_gl841_asic_test (Genesys_Device * dev) -{ - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val; - size_t size, verify_size; - unsigned int i; - - DBG(DBG_proc, "%s\n", __func__); - - return SANE_STATUS_INVAL; - - /* set and read exposure time, compare if it's the same */ - status = sanei_genesys_write_register (dev, 0x38, 0xde); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to write register: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_write_register (dev, 0x39, 0xad); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to write register: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_read_register (dev, 0x38, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read register: %s\n", __func__, sane_strstatus(status)); - return status; - } - if (val != 0xde) /* value of register 0x38 */ - { - DBG(DBG_error, "%s: register contains invalid value\n", __func__); - return SANE_STATUS_IO_ERROR; - } - - status = sanei_genesys_read_register (dev, 0x39, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read register: %s\n", __func__, sane_strstatus(status)); - return status; - } - if (val != 0xad) /* value of register 0x39 */ - { - DBG(DBG_error, "%s: register contains invalid value\n", __func__); - return SANE_STATUS_IO_ERROR; - } - - /* ram test: */ - size = 0x40000; - verify_size = size + 0x80; - /* todo: looks like the read size must be a multiple of 128? - otherwise the read doesn't succeed the second time after the scanner has - been plugged in. Very strange. */ - - std::vector data(size); - std::vector verify_data(verify_size); - - for (i = 0; i < (size - 1); i += 2) - { - data[i] = i / 512; - data[i + 1] = (i / 2) % 256; - } - - status = sanei_genesys_set_buffer_address (dev, 0x0000); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus(status)); - return status; - } - -/* status = sanei_genesys_bulk_write_data(dev, 0x3c, data, size); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write data: %s\n", __func__, sane_strstatus(status)); - free (data); - free (verify_data); - return status; - }*/ - - status = sanei_genesys_set_buffer_address (dev, 0x0000); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_bulk_read_data(dev, 0x45, verify_data.data(), verify_size); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk read data: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* todo: why i + 2 ? */ - for (i = 0; i < size; i++) - { - if (verify_data[i] != data[i]) - { - DBG(DBG_error, "%s: data verification error\n", __func__); - DBG(DBG_info, "0x%.8x: got %.2x %.2x %.2x %.2x, expected %.2x %.2x %.2x %.2x\n", - i, - verify_data[i], - verify_data[i+1], - verify_data[i+2], - verify_data[i+3], - data[i], - data[i+1], - data[i+2], - data[i+3]); - return SANE_STATUS_IO_ERROR; - } - } - - DBG(DBG_info, "%s: completed\n", __func__); - - return SANE_STATUS_GOOD; -} - -/* - * Set all registers LiDE 80 to default values - * (function called only once at the beginning) - * we are doing a special case to ease development - */ -static void -gl841_init_lide80 (Genesys_Device * dev) -{ - uint8_t val; - - INITREG (0x01, 0x82); /* 0x02 = SHDAREA and no CISSET ! */ - INITREG (0x02, 0x10); - INITREG (0x03, 0x50); - INITREG (0x04, 0x02); - INITREG (0x05, 0x4c); /* 1200 DPI */ - INITREG (0x06, 0x38); /* 0x38 scanmod=1, pwrbit, GAIN4 */ - INITREG (0x07, 0x00); - INITREG (0x08, 0x00); - INITREG (0x09, 0x11); - INITREG (0x0a, 0x00); - - INITREG (0x10, 0x40); - INITREG (0x11, 0x00); - INITREG (0x12, 0x40); - INITREG (0x13, 0x00); - INITREG (0x14, 0x40); - INITREG (0x15, 0x00); - INITREG (0x16, 0x00); - INITREG (0x17, 0x01); - INITREG (0x18, 0x00); - INITREG (0x19, 0x06); - INITREG (0x1a, 0x00); - INITREG (0x1b, 0x00); - INITREG (0x1c, 0x00); - INITREG (0x1d, 0x04); - INITREG (0x1e, 0x10); - INITREG (0x1f, 0x04); - INITREG (0x20, 0x02); - INITREG (0x21, 0x10); - INITREG (0x22, 0x20); - INITREG (0x23, 0x20); - INITREG (0x24, 0x10); - INITREG (0x25, 0x00); - INITREG (0x26, 0x00); - INITREG (0x27, 0x00); - - INITREG (0x29, 0xff); - - const auto& sensor = sanei_genesys_find_sensor_any(dev); - INITREG (0x2c, sensor.optical_res>>8); - INITREG (0x2d, sensor.optical_res & 0xff); - INITREG (0x2e, 0x80); - INITREG (0x2f, 0x80); - INITREG (0x30, 0x00); - INITREG (0x31, 0x10); - INITREG (0x32, 0x15); - INITREG (0x33, 0x0e); - INITREG (0x34, 0x40); - INITREG (0x35, 0x00); - INITREG (0x36, 0x2a); - INITREG (0x37, 0x30); - INITREG (0x38, 0x2a); - INITREG (0x39, 0xf8); - - INITREG (0x3d, 0x00); - INITREG (0x3e, 0x00); - INITREG (0x3f, 0x00); - - INITREG (0x52, 0x03); - INITREG (0x53, 0x07); - INITREG (0x54, 0x00); - INITREG (0x55, 0x00); - INITREG (0x56, 0x00); - INITREG (0x57, 0x00); - INITREG (0x58, 0x29); - INITREG (0x59, 0x69); - INITREG (0x5a, 0x55); - - INITREG (0x5d, 0x20); - INITREG (0x5e, 0x41); - INITREG (0x5f, 0x40); - INITREG (0x60, 0x00); - INITREG (0x61, 0x00); - INITREG (0x62, 0x00); - INITREG (0x63, 0x00); - INITREG (0x64, 0x00); - INITREG (0x65, 0x00); - INITREG (0x66, 0x00); - INITREG (0x67, 0x40); - INITREG (0x68, 0x40); - INITREG (0x69, 0x20); - INITREG (0x6a, 0x20); - INITREG (0x6c, dev->gpo.value[0]); - INITREG (0x6d, dev->gpo.value[1]); - INITREG (0x6e, dev->gpo.enable[0]); - INITREG (0x6f, dev->gpo.enable[1]); - INITREG (0x70, 0x00); - INITREG (0x71, 0x05); - INITREG (0x72, 0x07); - INITREG (0x73, 0x09); - INITREG (0x74, 0x00); - INITREG (0x75, 0x01); - INITREG (0x76, 0xff); - INITREG (0x77, 0x00); - INITREG (0x78, 0x0f); - INITREG (0x79, 0xf0); - INITREG (0x7a, 0xf0); - INITREG (0x7b, 0x00); - INITREG (0x7c, 0x1e); - INITREG (0x7d, 0x11); - INITREG (0x7e, 0x00); - INITREG (0x7f, 0x50); - INITREG (0x80, 0x00); - INITREG (0x81, 0x00); - INITREG (0x82, 0x0f); - INITREG (0x83, 0x00); - INITREG (0x84, 0x0e); - INITREG (0x85, 0x00); - INITREG (0x86, 0x0d); - INITREG (0x87, 0x02); - INITREG (0x88, 0x00); - INITREG (0x89, 0x00); - - /* specific scanner settings, clock and gpio first */ - sanei_genesys_read_register (dev, REG6B, &val); - sanei_genesys_write_register (dev, REG6B, 0x0c); - sanei_genesys_write_register (dev, 0x06, 0x10); - sanei_genesys_write_register (dev, REG6E, 0x6d); - sanei_genesys_write_register (dev, REG6F, 0x80); - sanei_genesys_write_register (dev, REG6B, 0x0e); - sanei_genesys_read_register (dev, REG6C, &val); - sanei_genesys_write_register (dev, REG6C, 0x00); - sanei_genesys_read_register (dev, REG6D, &val); - sanei_genesys_write_register (dev, REG6D, 0x8f); - sanei_genesys_read_register (dev, REG6B, &val); - sanei_genesys_write_register (dev, REG6B, 0x0e); - sanei_genesys_read_register (dev, REG6B, &val); - sanei_genesys_write_register (dev, REG6B, 0x0e); - sanei_genesys_read_register (dev, REG6B, &val); - sanei_genesys_write_register (dev, REG6B, 0x0a); - sanei_genesys_read_register (dev, REG6B, &val); - sanei_genesys_write_register (dev, REG6B, 0x02); - sanei_genesys_read_register (dev, REG6B, &val); - sanei_genesys_write_register (dev, REG6B, 0x06); - - sanei_genesys_write_0x8c (dev, 0x10, 0x94); - sanei_genesys_write_register (dev, 0x09, 0x10); - - /* set up GPIO : no address, so no bulk write, doesn't written directly either ? */ - /* - dev->reg.find_reg(0x6c).value = dev->gpo.value[0]; - dev->reg.find_reg(0x6d).value = dev->gpo.value[1]; - dev->reg.find_reg(0x6e).value = dev->gpo.enable[0]; - dev->reg.find_reg(0x6f).value = dev->gpo.enable[1]; */ - - // FIXME: the following code originally changed 0x6b, but due to bug the 0x6c register was - // effectively changed. The current behavior matches the old code, but should probably be fixed. - dev->reg.find_reg(0x6c).value |= REG6B_GPO18; - dev->reg.find_reg(0x6c).value &= ~REG6B_GPO17; - - sanei_gl841_setup_sensor(dev, sensor, &dev->reg, 0, 0); -} - -/* - * Set all registers to default values - * (function called only once at the beginning) - */ -static void -gl841_init_registers (Genesys_Device * dev) -{ - int addr; - - DBG(DBG_proc, "%s\n", __func__); - - dev->reg.clear(); - if (dev->model->model_id == MODEL_CANON_LIDE_80) - { - gl841_init_lide80(dev); - return ; - } - - for (addr = 1; addr <= 0x0a; addr++) { - dev->reg.init_reg(addr, 0); - } - for (addr = 0x10; addr <= 0x27; addr++) { - dev->reg.init_reg(addr, 0); - } - dev->reg.init_reg(0x29, 0); - for (addr = 0x2c; addr <= 0x39; addr++) - dev->reg.init_reg(addr, 0); - for (addr = 0x3d; addr <= 0x3f; addr++) - dev->reg.init_reg(addr, 0); - for (addr = 0x52; addr <= 0x5a; addr++) - dev->reg.init_reg(addr, 0); - for (addr = 0x5d; addr <= 0x87; addr++) - dev->reg.init_reg(addr, 0); - - - dev->reg.find_reg(0x01).value = 0x20; /* (enable shading), CCD, color, 1M */ - if (dev->model->is_cis == SANE_TRUE) { - dev->reg.find_reg(0x01).value |= REG01_CISSET; - } else { - dev->reg.find_reg(0x01).value &= ~REG01_CISSET; - } - - dev->reg.find_reg(0x02).value = 0x30 /*0x38 */ ; /* auto home, one-table-move, full step */ - dev->reg.find_reg(0x02).value |= REG02_AGOHOME; - sanei_genesys_set_motor_power(dev->reg, true); - dev->reg.find_reg(0x02).value |= REG02_FASTFED; - - dev->reg.find_reg(0x03).value = 0x1f /*0x17 */ ; /* lamp on */ - dev->reg.find_reg(0x03).value |= REG03_AVEENB; - - if (dev->model->ccd_type == CCD_PLUSTEK_3600) /* AD front end */ - { - dev->reg.find_reg(0x04).value = (2 << REG04S_AFEMOD) | 0x02; - } - else /* Wolfson front end */ - { - dev->reg.find_reg(0x04).value |= 1 << REG04S_AFEMOD; - } - - const auto& sensor = sanei_genesys_find_sensor_any(dev); - - dev->reg.find_reg(0x05).value = 0x00; /* disable gamma, 24 clocks/pixel */ - if (sensor.sensor_pixels < 0x1500) - dev->reg.find_reg(0x05).value |= REG05_DPIHW_600; - else if (sensor.sensor_pixels < 0x2a80) - dev->reg.find_reg(0x05).value |= REG05_DPIHW_1200; - else if (sensor.sensor_pixels < 0x5400) - dev->reg.find_reg(0x05).value |= REG05_DPIHW_2400; - else - { - dev->reg.find_reg(0x05).value |= REG05_DPIHW_2400; - DBG(DBG_warn, "%s: Cannot handle sensor pixel count %d\n", __func__, - sensor.sensor_pixels); - } - - - dev->reg.find_reg(0x06).value |= REG06_PWRBIT; - dev->reg.find_reg(0x06).value |= REG06_GAIN4; - - /* XP300 CCD needs different clock and clock/pixels values */ - if (dev->model->ccd_type != CCD_XP300 && dev->model->ccd_type != CCD_DP685 - && dev->model->ccd_type != CCD_PLUSTEK_3600) - { - dev->reg.find_reg(0x06).value |= 0 << REG06S_SCANMOD; - dev->reg.find_reg(0x09).value |= 1 << REG09S_CLKSET; - } - else - { - dev->reg.find_reg(0x06).value |= 0x05 << REG06S_SCANMOD; /* 15 clocks/pixel */ - dev->reg.find_reg(0x09).value = 0; /* 24 MHz CLKSET */ - } - - dev->reg.find_reg(0x1e).value = 0xf0; /* watch-dog time */ - - dev->reg.find_reg(0x17).value |= 1 << REG17S_TGW; - - dev->reg.find_reg(0x19).value = 0x50; - - dev->reg.find_reg(0x1d).value |= 1 << REG1DS_TGSHLD; - - dev->reg.find_reg(0x1e).value |= 1 << REG1ES_WDTIME; - -/*SCANFED*/ - dev->reg.find_reg(0x1f).value = 0x01; - -/*BUFSEL*/ - dev->reg.find_reg(0x20).value = 0x20; - -/*LAMPPWM*/ - dev->reg.find_reg(0x29).value = 0xff; - -/*BWHI*/ - dev->reg.find_reg(0x2e).value = 0x80; - -/*BWLOW*/ - dev->reg.find_reg(0x2f).value = 0x80; - -/*LPERIOD*/ - dev->reg.find_reg(0x38).value = 0x4f; - dev->reg.find_reg(0x39).value = 0xc1; - -/*VSMPW*/ - dev->reg.find_reg(0x58).value |= 3 << REG58S_VSMPW; - -/*BSMPW*/ - dev->reg.find_reg(0x59).value |= 3 << REG59S_BSMPW; - -/*RLCSEL*/ - dev->reg.find_reg(0x5a).value |= REG5A_RLCSEL; - -/*STOPTIM*/ - dev->reg.find_reg(0x5e).value |= 0x2 << REG5ES_STOPTIM; - - sanei_gl841_setup_sensor(dev, sensor, &dev->reg, 0, 0); - - /* set up GPIO */ - dev->reg.find_reg(0x6c).value = dev->gpo.value[0]; - dev->reg.find_reg(0x6d).value = dev->gpo.value[1]; - dev->reg.find_reg(0x6e).value = dev->gpo.enable[0]; - dev->reg.find_reg(0x6f).value = dev->gpo.enable[1]; - - /* TODO there is a switch calling to be written here */ - if (dev->model->gpo_type == GPO_CANONLIDE35) - { - dev->reg.find_reg(0x6b).value |= REG6B_GPO18; - dev->reg.find_reg(0x6b).value &= ~REG6B_GPO17; - } - - if (dev->model->gpo_type == GPO_XP300) - { - dev->reg.find_reg(0x6b).value |= REG6B_GPO17; - } - - if (dev->model->gpo_type == GPO_DP685) - { - /* REG6B_GPO18 lights on green led */ - dev->reg.find_reg(0x6b).value |= REG6B_GPO17|REG6B_GPO18; - } - - DBG(DBG_proc, "%s complete\n", __func__); -} - -/* Send slope table for motor movement - slope_table in machine byte order - */ -static SANE_Status -gl841_send_slope_table (Genesys_Device * dev, int table_nr, - uint16_t * slope_table, int steps) -{ - int dpihw; - int start_address; - SANE_Status status = SANE_STATUS_GOOD; - char msg[4000]; -/*#ifdef WORDS_BIGENDIAN*/ - int i; -/*#endif*/ - - DBG(DBG_proc, "%s (table_nr = %d, steps = %d)\n", __func__, table_nr, steps); - - dpihw = dev->reg.find_reg(0x05).value >> 6; - - if (dpihw == 0) /* 600 dpi */ - start_address = 0x08000; - else if (dpihw == 1) /* 1200 dpi */ - start_address = 0x10000; - else if (dpihw == 2) /* 2400 dpi */ - start_address = 0x20000; - else /* reserved */ - return SANE_STATUS_INVAL; - - std::vector table(steps * 2); - for(i = 0; i < steps; i++) { - table[i * 2] = slope_table[i] & 0xff; - table[i * 2 + 1] = slope_table[i] >> 8; - } - - if (DBG_LEVEL >= DBG_io) - { - sprintf (msg, "write slope %d (%d)=", table_nr, steps); - for (i = 0; i < steps; i++) - { - sprintf (msg+strlen(msg), ",%d", slope_table[i]); - } - DBG(DBG_io, "%s: %s\n", __func__, msg); - } - - status = - sanei_genesys_set_buffer_address (dev, start_address + table_nr * 0x200); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_bulk_write_data(dev, 0x3c, table.data(), steps * 2); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to send slope table: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_proc, "%s: completed\n", __func__); - return status; -} - -static SANE_Status -gl841_set_lide80_fe (Genesys_Device * dev, uint8_t set) -{ - SANE_Status status = SANE_STATUS_GOOD; - - DBGSTART; - - if (set == AFE_INIT) - { - DBG(DBG_proc, "%s(): setting DAC %u\n", __func__, dev->model->dac_type); - - dev->frontend = dev->frontend_initial; - - /* write them to analog frontend */ - status = sanei_genesys_fe_write_data(dev, 0x00, dev->frontend.regs.get_value(0x00)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x00 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - status = sanei_genesys_fe_write_data(dev, 0x03, dev->frontend.regs.get_value(0x01)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x03 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - status = sanei_genesys_fe_write_data(dev, 0x06, dev->frontend.regs.get_value(0x02)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x06 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - - if (set == AFE_SET) - { - status = sanei_genesys_fe_write_data(dev, 0x00, dev->frontend.regs.get_value(0x00)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x00 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - status = sanei_genesys_fe_write_data(dev, 0x06, dev->frontend.regs.get_value(0x20)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing offset failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - status = sanei_genesys_fe_write_data(dev, 0x03, dev->frontend.regs.get_value(0x28)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing gain failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - - return status; - DBGCOMPLETED; -} - -/* Set values of Analog Device type frontend */ -static SANE_Status -gl841_set_ad_fe (Genesys_Device * dev, uint8_t set) -{ - SANE_Status status = SANE_STATUS_GOOD; - int i; - - /* special case for LiDE 80 analog frontend */ - if(dev->model->dac_type==DAC_CANONLIDE80) - { - return gl841_set_lide80_fe(dev, set); - } - - DBG(DBG_proc, "%s(): start\n", __func__); - if (set == AFE_INIT) - { - DBG(DBG_proc, "%s(): setting DAC %u\n", __func__, dev->model->dac_type); - - dev->frontend = dev->frontend_initial; - - /* write them to analog frontend */ - status = sanei_genesys_fe_write_data(dev, 0x00, dev->frontend.regs.get_value(0x00)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x00 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_fe_write_data(dev, 0x01, dev->frontend.regs.get_value(0x01)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x01 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - for (i = 0; i < 6; i++) - { - status = - sanei_genesys_fe_write_data (dev, 0x02 + i, 0x00); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing sign[%d] failed: %s\n", __func__, 0x02 + i, - sane_strstatus(status)); - return status; - } - } - } - if (set == AFE_SET) - { - /* write them to analog frontend */ - status = sanei_genesys_fe_write_data(dev, 0x00, dev->frontend.regs.get_value(0x00)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x00 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_fe_write_data(dev, 0x01, dev->frontend.regs.get_value(0x01)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg 0x01 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* Write fe 0x02 (red gain)*/ - status = sanei_genesys_fe_write_data(dev, 0x02, dev->frontend.get_gain(0)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing fe 0x02 (gain r) fail: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* Write fe 0x03 (green gain)*/ - status = sanei_genesys_fe_write_data(dev, 0x03, dev->frontend.get_gain(1)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing fe 0x03 (gain g) fail: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* Write fe 0x04 (blue gain)*/ - status = sanei_genesys_fe_write_data(dev, 0x04, dev->frontend.get_gain(2)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing fe 0x04 (gain b) fail: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* Write fe 0x05 (red offset)*/ - status = - sanei_genesys_fe_write_data(dev, 0x05, dev->frontend.get_offset(0)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: write fe 0x05 (offset r) fail: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* Write fe 0x06 (green offset)*/ - status = - sanei_genesys_fe_write_data(dev, 0x06, dev->frontend.get_offset(1)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: write fe 0x06 (offset g) fail: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* Write fe 0x07 (blue offset)*/ - status = - sanei_genesys_fe_write_data(dev, 0x07, dev->frontend.get_offset(2)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: write fe 0x07 (offset b) fail: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - DBG(DBG_proc, "%s(): end\n", __func__); - - return status; -} - -/* Set values of analog frontend */ -static SANE_Status -gl841_set_fe(Genesys_Device * dev, const Genesys_Sensor& sensor, uint8_t set) -{ - (void) sensor; - SANE_Status status = SANE_STATUS_GOOD; - int i; - - DBG(DBG_proc, "%s (%s)\n", __func__, - set == AFE_INIT ? "init" : set == AFE_SET ? "set" : set == - AFE_POWER_SAVE ? "powersave" : "huh?"); - - /* Analog Device type frontend */ - if ((dev->reg.find_reg(0x04).value & REG04_FESET) == 0x02) - { - return gl841_set_ad_fe (dev, set); - } - - if ((dev->reg.find_reg(0x04).value & REG04_FESET) != 0x00) - { - DBG(DBG_proc, "%s(): unsupported frontend type %d\n", __func__, - dev->reg.find_reg(0x04).value & REG04_FESET); - return SANE_STATUS_UNSUPPORTED; - } - - if (set == AFE_INIT) - { - DBG(DBG_proc, "%s(): setting DAC %u\n", __func__, dev->model->dac_type); - dev->frontend = dev->frontend_initial; - - /* reset only done on init */ - status = sanei_genesys_fe_write_data (dev, 0x04, 0x80); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: reset fe failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - DBG(DBG_proc, "%s(): frontend reset complete\n", __func__); - } - - - if (set == AFE_POWER_SAVE) - { - status = sanei_genesys_fe_write_data (dev, 0x01, 0x02); - if (status != SANE_STATUS_GOOD) { - DBG(DBG_error, "%s: writing data failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - return status; - } - - /* todo : base this test on cfg reg3 or a CCD family flag to be created */ - /*if (dev->model->ccd_type!=CCD_HP2300 && dev->model->ccd_type!=CCD_HP2400) */ - { - - status = sanei_genesys_fe_write_data(dev, 0x00, dev->frontend.regs.get_value(0x00)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg0 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - status = sanei_genesys_fe_write_data(dev, 0x02, dev->frontend.regs.get_value(0x02)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg2 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - - status = sanei_genesys_fe_write_data(dev, 0x01, dev->frontend.regs.get_value(0x01)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg1 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_fe_write_data(dev, 0x03, dev->frontend.regs.get_value(0x03)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg3 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_fe_write_data (dev, 0x06, dev->frontend.reg2[0]); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg6 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_fe_write_data (dev, 0x08, dev->frontend.reg2[1]); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg8 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = sanei_genesys_fe_write_data (dev, 0x09, dev->frontend.reg2[2]); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing reg9 failed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - for (i = 0; i < 3; i++) - { - status = - sanei_genesys_fe_write_data(dev, 0x24 + i, dev->frontend.regs.get_value(0x24 + i)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing sign[%d] failed: %s\n", __func__, i, - sane_strstatus(status)); - return status; - } - - status = - sanei_genesys_fe_write_data(dev, 0x28 + i, dev->frontend.get_gain(i)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing gain[%d] failed: %s\n", __func__, i, - sane_strstatus(status)); - return status; - } - - status = - sanei_genesys_fe_write_data(dev, 0x20 + i, - dev->frontend.get_offset(i)); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: writing offset[%d] failed: %s\n", __func__, i, - sane_strstatus(status)); - return status; - } - } - - - DBG(DBG_proc, "%s: completed\n", __func__); - - return SANE_STATUS_GOOD; -} - -#define MOTOR_ACTION_FEED 1 -#define MOTOR_ACTION_GO_HOME 2 -#define MOTOR_ACTION_HOME_FREE 3 - -/** @brief turn off motor - * - */ -static SANE_Status -gl841_init_motor_regs_off(Genesys_Register_Set * reg, - unsigned int scan_lines) -{ - unsigned int feedl; - GenesysRegister* r; - - DBG(DBG_proc, "%s : scan_lines=%d\n", __func__, scan_lines); - - feedl = 2; - - r = sanei_genesys_get_address (reg, 0x3d); - r->value = (feedl >> 16) & 0xf; - r = sanei_genesys_get_address (reg, 0x3e); - r->value = (feedl >> 8) & 0xff; - r = sanei_genesys_get_address (reg, 0x3f); - r->value = feedl & 0xff; - r = sanei_genesys_get_address (reg, 0x5e); - r->value &= ~0xe0; - - r = sanei_genesys_get_address (reg, 0x25); - r->value = (scan_lines >> 16) & 0xf; - r = sanei_genesys_get_address (reg, 0x26); - r->value = (scan_lines >> 8) & 0xff; - r = sanei_genesys_get_address (reg, 0x27); - r->value = scan_lines & 0xff; - - r = sanei_genesys_get_address (reg, 0x02); - r->value &= ~0x01; /*LONGCURV OFF*/ - r->value &= ~0x80; /*NOT_HOME OFF*/ - - r->value &= ~0x10; - - r->value &= ~0x06; - - r->value &= ~0x08; - - r->value &= ~0x20; - - r->value &= ~0x40; - - r = sanei_genesys_get_address (reg, 0x67); - r->value = 0x3f; - - r = sanei_genesys_get_address (reg, 0x68); - r->value = 0x3f; - - r = sanei_genesys_get_address (reg, REG_STEPNO); - r->value = 0; - - r = sanei_genesys_get_address (reg, REG_FASTNO); - r->value = 0; - - r = sanei_genesys_get_address (reg, 0x69); - r->value = 0; - - r = sanei_genesys_get_address (reg, 0x6a); - r->value = 0; - - r = sanei_genesys_get_address (reg, 0x5f); - r->value = 0; - - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -/** @brief write motor table frequency - * Write motor frequency data table. - * @param dev device to set up motor - * @param ydpi motor target resolution - * @return SANE_STATUS_GOOD on success - */ -static SANE_Status gl841_write_freq(Genesys_Device *dev, unsigned int ydpi) -{ -SANE_Status status = SANE_STATUS_GOOD; -/**< fast table */ -uint8_t tdefault[] = {0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0x36,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xb6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0xf6,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76,0x18,0x76}; -uint8_t t1200[] = {0xc7,0x31,0xc7,0x31,0xc7,0x31,0xc7,0x31,0xc7,0x31,0xc7,0x31,0xc7,0x31,0xc7,0x31,0xc0,0x11,0xc0,0x11,0xc0,0x11,0xc0,0x11,0xc0,0x11,0xc0,0x11,0xc0,0x11,0xc0,0x11,0xc7,0xb1,0xc7,0xb1,0xc7,0xb1,0xc7,0xb1,0xc7,0xb1,0xc7,0xb1,0xc7,0xb1,0xc7,0xb1,0x07,0xe0,0x07,0xe0,0x07,0xe0,0x07,0xe0,0x07,0xe0,0x07,0xe0,0x07,0xe0,0x07,0xe0,0xc7,0xf1,0xc7,0xf1,0xc7,0xf1,0xc7,0xf1,0xc7,0xf1,0xc7,0xf1,0xc7,0xf1,0xc7,0xf1,0xc0,0x51,0xc0,0x51,0xc0,0x51,0xc0,0x51,0xc0,0x51,0xc0,0x51,0xc0,0x51,0xc0,0x51,0xc7,0x71,0xc7,0x71,0xc7,0x71,0xc7,0x71,0xc7,0x71,0xc7,0x71,0xc7,0x71,0xc7,0x71,0x07,0x20,0x07,0x20,0x07,0x20,0x07,0x20,0x07,0x20,0x07,0x20,0x07,0x20,0x07,0x20}; -uint8_t t300[] = {0x08,0x32,0x08,0x32,0x08,0x32,0x08,0x32,0x08,0x32,0x08,0x32,0x08,0x32,0x08,0x32,0x00,0x13,0x00,0x13,0x00,0x13,0x00,0x13,0x00,0x13,0x00,0x13,0x00,0x13,0x00,0x13,0x08,0xb2,0x08,0xb2,0x08,0xb2,0x08,0xb2,0x08,0xb2,0x08,0xb2,0x08,0xb2,0x08,0xb2,0x0c,0xa0,0x0c,0xa0,0x0c,0xa0,0x0c,0xa0,0x0c,0xa0,0x0c,0xa0,0x0c,0xa0,0x0c,0xa0,0x08,0xf2,0x08,0xf2,0x08,0xf2,0x08,0xf2,0x08,0xf2,0x08,0xf2,0x08,0xf2,0x08,0xf2,0x00,0xd3,0x00,0xd3,0x00,0xd3,0x00,0xd3,0x00,0xd3,0x00,0xd3,0x00,0xd3,0x00,0xd3,0x08,0x72,0x08,0x72,0x08,0x72,0x08,0x72,0x08,0x72,0x08,0x72,0x08,0x72,0x08,0x72,0x0c,0x60,0x0c,0x60,0x0c,0x60,0x0c,0x60,0x0c,0x60,0x0c,0x60,0x0c,0x60,0x0c,0x60}; -uint8_t t150[] = {0x0c,0x33,0xcf,0x33,0xcf,0x33,0xcf,0x33,0xcf,0x33,0xcf,0x33,0xcf,0x33,0xcf,0x33,0x40,0x14,0x80,0x15,0x80,0x15,0x80,0x15,0x80,0x15,0x80,0x15,0x80,0x15,0x80,0x15,0x0c,0xb3,0xcf,0xb3,0xcf,0xb3,0xcf,0xb3,0xcf,0xb3,0xcf,0xb3,0xcf,0xb3,0xcf,0xb3,0x11,0xa0,0x16,0xa0,0x16,0xa0,0x16,0xa0,0x16,0xa0,0x16,0xa0,0x16,0xa0,0x16,0xa0,0x0c,0xf3,0xcf,0xf3,0xcf,0xf3,0xcf,0xf3,0xcf,0xf3,0xcf,0xf3,0xcf,0xf3,0xcf,0xf3,0x40,0xd4,0x80,0xd5,0x80,0xd5,0x80,0xd5,0x80,0xd5,0x80,0xd5,0x80,0xd5,0x80,0xd5,0x0c,0x73,0xcf,0x73,0xcf,0x73,0xcf,0x73,0xcf,0x73,0xcf,0x73,0xcf,0x73,0xcf,0x73,0x11,0x60,0x16,0x60,0x16,0x60,0x16,0x60,0x16,0x60,0x16,0x60,0x16,0x60,0x16,0x60}; - -uint8_t *table; - - DBGSTART; - if(dev->model->motor_type == MOTOR_CANONLIDE80) - { - switch(ydpi) - { - case 3600: - case 1200: - table=t1200; - break; - case 900: - case 300: - table=t300; - break; - case 450: - case 150: - table=t150; - break; - default: - table=tdefault; - } - RIE(sanei_genesys_write_register(dev, 0x66, 0x00)); - RIE(sanei_genesys_write_register(dev, 0x5b, 0x0c)); - RIE(sanei_genesys_write_register(dev, 0x5c, 0x00)); - RIE(sanei_genesys_bulk_write_data(dev, 0x28, table, 128)); - RIE(sanei_genesys_write_register(dev, 0x5b, 0x00)); - RIE(sanei_genesys_write_register(dev, 0x5c, 0x00)); - } - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - - -static SANE_Status -gl841_init_motor_regs(Genesys_Device * dev, - const Genesys_Sensor& sensor, - Genesys_Register_Set * reg, - unsigned int feed_steps,/*1/base_ydpi*/ -/*maybe float for half/quarter step resolution?*/ - unsigned int action, - unsigned int flags) -{ - SANE_Status status = SANE_STATUS_GOOD; - unsigned int fast_exposure; - int scan_power_mode; - int use_fast_fed = 0; - uint16_t fast_slope_table[256]; - unsigned int fast_slope_steps = 0; - unsigned int feedl; - GenesysRegister* r; -/*number of scan lines to add in a scan_lines line*/ - - DBG(DBG_proc, "%s : feed_steps=%d, action=%d, flags=%x\n", __func__, feed_steps, action, flags); - - memset(fast_slope_table,0xff,512); - - gl841_send_slope_table (dev, 0, fast_slope_table, 256); - gl841_send_slope_table (dev, 1, fast_slope_table, 256); - gl841_send_slope_table (dev, 2, fast_slope_table, 256); - gl841_send_slope_table (dev, 3, fast_slope_table, 256); - gl841_send_slope_table (dev, 4, fast_slope_table, 256); - - gl841_write_freq(dev, dev->motor.base_ydpi / 4); - - fast_slope_steps = 256; - if (action == MOTOR_ACTION_FEED || action == MOTOR_ACTION_GO_HOME) - { - /* FEED and GO_HOME can use fastest slopes available */ - fast_exposure = gl841_exposure_time(dev, sensor, - dev->motor.base_ydpi / 4, - 0, - 0, - 0, - &scan_power_mode); - DBG(DBG_info, "%s : fast_exposure=%d pixels\n", __func__, fast_exposure); - } - - if (action == MOTOR_ACTION_HOME_FREE) { -/* HOME_FREE must be able to stop in one step, so do not try to get faster */ - fast_exposure = dev->motor.slopes[0][0].maximum_start_speed; - } - - sanei_genesys_create_slope_table3 ( - dev, - fast_slope_table, - 256, - fast_slope_steps, - 0, - fast_exposure, - dev->motor.base_ydpi / 4, - &fast_slope_steps, - &fast_exposure, 0); - - feedl = feed_steps - fast_slope_steps*2; - use_fast_fed = 1; - -/* all needed slopes available. we did even decide which mode to use. - what next? - - transfer slopes -SCAN: -flags \ use_fast_fed ! 0 1 -------------------------\-------------------- - 0 ! 0,1,2 0,1,2,3 -MOTOR_FLAG_AUTO_GO_HOME ! 0,1,2,4 0,1,2,3,4 -OFF: none -FEED: 3 -GO_HOME: 3 -HOME_FREE: 3 - - setup registers - * slope specific registers (already done) - * DECSEL for HOME_FREE/GO_HOME/SCAN - * FEEDL - * MTRREV - * MTRPWR - * FASTFED - * STEPSEL - * MTRPWM - * FSTPSEL - * FASTPWM - * HOMENEG - * BWDSTEP - * FWDSTEP - * Z1 - * Z2 - */ - - r = sanei_genesys_get_address(reg, 0x3d); - r->value = (feedl >> 16) & 0xf; - r = sanei_genesys_get_address(reg, 0x3e); - r->value = (feedl >> 8) & 0xff; - r = sanei_genesys_get_address(reg, 0x3f); - r->value = feedl & 0xff; - r = sanei_genesys_get_address(reg, 0x5e); - r->value &= ~0xe0; - - r = sanei_genesys_get_address(reg, 0x25); - r->value = 0; - r = sanei_genesys_get_address(reg, 0x26); - r->value = 0; - r = sanei_genesys_get_address(reg, 0x27); - r->value = 0; - - r = sanei_genesys_get_address(reg, 0x02); - r->value &= ~0x01; /*LONGCURV OFF*/ - r->value &= ~0x80; /*NOT_HOME OFF*/ - - r->value |= 0x10; - - if (action == MOTOR_ACTION_GO_HOME) - r->value |= 0x06; - else - r->value &= ~0x06; - - if (use_fast_fed) - r->value |= 0x08; - else - r->value &= ~0x08; - - if (flags & MOTOR_FLAG_AUTO_GO_HOME) - r->value |= 0x20; - else - r->value &= ~0x20; - - r->value &= ~0x40; - - status = gl841_send_slope_table (dev, 3, fast_slope_table, 256); - - if (status != SANE_STATUS_GOOD) - return status; - - r = sanei_genesys_get_address(reg, 0x67); - r->value = 0x3f; - - r = sanei_genesys_get_address(reg, 0x68); - r->value = 0x3f; - - r = sanei_genesys_get_address(reg, REG_STEPNO); - r->value = 0; - - r = sanei_genesys_get_address(reg, REG_FASTNO); - r->value = 0; - - r = sanei_genesys_get_address(reg, 0x69); - r->value = 0; - - r = sanei_genesys_get_address(reg, 0x6a); - r->value = (fast_slope_steps >> 1) + (fast_slope_steps & 1); - - r = sanei_genesys_get_address(reg, 0x5f); - r->value = (fast_slope_steps >> 1) + (fast_slope_steps & 1); - - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -static SANE_Status -gl841_init_motor_regs_scan(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set * reg, - unsigned int scan_exposure_time,/*pixel*/ - float scan_yres,/*dpi, motor resolution*/ - int scan_step_type,/*0: full, 1: half, 2: quarter*/ - unsigned int scan_lines,/*lines, scan resolution*/ - unsigned int scan_dummy, -/*number of scan lines to add in a scan_lines line*/ - unsigned int feed_steps,/*1/base_ydpi*/ -/*maybe float for half/quarter step resolution?*/ - int scan_power_mode, - unsigned int flags) -{ - SANE_Status status = SANE_STATUS_GOOD; - unsigned int fast_exposure; - int use_fast_fed = 0; - int dummy_power_mode; - unsigned int fast_time; - unsigned int slow_time; - uint16_t slow_slope_table[256]; - uint16_t fast_slope_table[256]; - uint16_t back_slope_table[256]; - unsigned int slow_slope_time; - unsigned int fast_slope_time; - unsigned int slow_slope_steps = 0; - unsigned int fast_slope_steps = 0; - unsigned int back_slope_steps = 0; - unsigned int feedl; - GenesysRegister* r; - unsigned int min_restep = 0x20; - uint32_t z1, z2; - - DBG(DBG_proc, "%s : scan_exposure_time=%d, scan_yres=%g, scan_step_type=%d, scan_lines=%d," - " scan_dummy=%d, feed_steps=%d, scan_power_mode=%d, flags=%x\n", __func__, - scan_exposure_time, - scan_yres, - scan_step_type, - scan_lines, - scan_dummy, - feed_steps, - scan_power_mode, - flags); - - fast_exposure = gl841_exposure_time(dev, sensor, - dev->motor.base_ydpi / 4, - 0, - 0, - 0, - &dummy_power_mode); - - DBG(DBG_info, "%s : fast_exposure=%d pixels\n", __func__, fast_exposure); - - memset(slow_slope_table,0xff,512); - - gl841_send_slope_table (dev, 0, slow_slope_table, 256); - gl841_send_slope_table (dev, 1, slow_slope_table, 256); - gl841_send_slope_table (dev, 2, slow_slope_table, 256); - gl841_send_slope_table (dev, 3, slow_slope_table, 256); - gl841_send_slope_table (dev, 4, slow_slope_table, 256); - - /* motor frequency table */ - gl841_write_freq(dev, scan_yres); - -/* - we calculate both tables for SCAN. the fast slope step count depends on - how many steps we need for slow acceleration and how much steps we are - allowed to use. - */ - slow_slope_time = sanei_genesys_create_slope_table3 ( - dev, - slow_slope_table, 256, - 256, - scan_step_type, - scan_exposure_time, - scan_yres, - &slow_slope_steps, - NULL, - scan_power_mode); - - sanei_genesys_create_slope_table3 ( - dev, - back_slope_table, 256, - 256, - scan_step_type, - 0, - scan_yres, - &back_slope_steps, - NULL, - scan_power_mode); - - if (feed_steps < (slow_slope_steps >> scan_step_type)) { - /*TODO: what should we do here?? go back to exposure calculation?*/ - feed_steps = slow_slope_steps >> scan_step_type; - } - - if (feed_steps > fast_slope_steps*2 - - (slow_slope_steps >> scan_step_type)) - fast_slope_steps = 256; - else -/* we need to shorten fast_slope_steps here. */ - fast_slope_steps = (feed_steps - - (slow_slope_steps >> scan_step_type))/2; - - DBG(DBG_info, "%s: Maximum allowed slope steps for fast slope: %d\n", __func__, - fast_slope_steps); - - fast_slope_time = sanei_genesys_create_slope_table3 ( - dev, - fast_slope_table, 256, - fast_slope_steps, - 0, - fast_exposure, - dev->motor.base_ydpi / 4, - &fast_slope_steps, - &fast_exposure, - scan_power_mode); - - /* fast fed special cases handling */ - if (dev->model->gpo_type == GPO_XP300 - || dev->model->gpo_type == GPO_DP685) - { - /* quirk: looks like at least this scanner is unable to use - 2-feed mode */ - use_fast_fed = 0; - } - else if (feed_steps < fast_slope_steps*2 + (slow_slope_steps >> scan_step_type)) { - use_fast_fed = 0; - DBG(DBG_info, "%s: feed too short, slow move forced.\n", __func__); - } else { -/* for deciding whether we should use fast mode we need to check how long we - need for (fast)accelerating, moving, decelerating, (TODO: stopping?) - (slow)accelerating again versus (slow)accelerating and moving. we need - fast and slow tables here. -*/ -/*NOTE: scan_exposure_time is per scan_yres*/ -/*NOTE: fast_exposure is per base_ydpi/4*/ -/*we use full steps as base unit here*/ - fast_time = - fast_exposure / 4 * - (feed_steps - fast_slope_steps*2 - - (slow_slope_steps >> scan_step_type)) - + fast_slope_time*2 + slow_slope_time; - slow_time = - (scan_exposure_time * scan_yres) / dev->motor.base_ydpi * - (feed_steps - (slow_slope_steps >> scan_step_type)) - + slow_slope_time; - - DBG(DBG_info, "%s: Time for slow move: %d\n", __func__, slow_time); - DBG(DBG_info, "%s: Time for fast move: %d\n", __func__, fast_time); - - use_fast_fed = fast_time < slow_time; - } - - if (use_fast_fed) - feedl = feed_steps - fast_slope_steps*2 - - (slow_slope_steps >> scan_step_type); - else - if ((feed_steps << scan_step_type) < slow_slope_steps) - feedl = 0; - else - feedl = (feed_steps << scan_step_type) - slow_slope_steps; - DBG(DBG_info, "%s: Decided to use %s mode\n", __func__, use_fast_fed?"fast feed":"slow feed"); - -/* all needed slopes available. we did even decide which mode to use. - what next? - - transfer slopes -SCAN: -flags \ use_fast_fed ! 0 1 -------------------------\-------------------- - 0 ! 0,1,2 0,1,2,3 -MOTOR_FLAG_AUTO_GO_HOME ! 0,1,2,4 0,1,2,3,4 -OFF: none -FEED: 3 -GO_HOME: 3 -HOME_FREE: 3 - - setup registers - * slope specific registers (already done) - * DECSEL for HOME_FREE/GO_HOME/SCAN - * FEEDL - * MTRREV - * MTRPWR - * FASTFED - * STEPSEL - * MTRPWM - * FSTPSEL - * FASTPWM - * HOMENEG - * BWDSTEP - * FWDSTEP - * Z1 - * Z2 - */ - - r = sanei_genesys_get_address (reg, 0x3d); - r->value = (feedl >> 16) & 0xf; - r = sanei_genesys_get_address (reg, 0x3e); - r->value = (feedl >> 8) & 0xff; - r = sanei_genesys_get_address (reg, 0x3f); - r->value = feedl & 0xff; - r = sanei_genesys_get_address (reg, 0x5e); - r->value &= ~0xe0; - - r = sanei_genesys_get_address (reg, 0x25); - r->value = (scan_lines >> 16) & 0xf; - r = sanei_genesys_get_address (reg, 0x26); - r->value = (scan_lines >> 8) & 0xff; - r = sanei_genesys_get_address (reg, 0x27); - r->value = scan_lines & 0xff; - - r = sanei_genesys_get_address (reg, 0x02); - r->value &= ~0x01; /*LONGCURV OFF*/ - r->value &= ~0x80; /*NOT_HOME OFF*/ - r->value |= 0x10; - - r->value &= ~0x06; - - if (use_fast_fed) - r->value |= 0x08; - else - r->value &= ~0x08; - - if (flags & MOTOR_FLAG_AUTO_GO_HOME) - r->value |= 0x20; - else - r->value &= ~0x20; - - if (flags & MOTOR_FLAG_DISABLE_BUFFER_FULL_MOVE) - r->value |= 0x40; - else - r->value &= ~0x40; - - status = gl841_send_slope_table (dev, 0, slow_slope_table, 256); - - if (status != SANE_STATUS_GOOD) - return status; - - status = gl841_send_slope_table (dev, 1, back_slope_table, 256); - - if (status != SANE_STATUS_GOOD) - return status; - - status = gl841_send_slope_table (dev, 2, slow_slope_table, 256); - - if (status != SANE_STATUS_GOOD) - return status; - - if (use_fast_fed) { - status = gl841_send_slope_table (dev, 3, fast_slope_table, 256); - - if (status != SANE_STATUS_GOOD) - return status; - } - - if (flags & MOTOR_FLAG_AUTO_GO_HOME){ - status = gl841_send_slope_table (dev, 4, fast_slope_table, 256); - - if (status != SANE_STATUS_GOOD) - return status; - } - - -/* now reg 0x21 and 0x24 are available, we can calculate reg 0x22 and 0x23, - reg 0x60-0x62 and reg 0x63-0x65 - rule: - 2*STEPNO+FWDSTEP=2*FASTNO+BWDSTEP -*/ -/* steps of table 0*/ - if (min_restep < slow_slope_steps*2+2) - min_restep = slow_slope_steps*2+2; -/* steps of table 1*/ - if (min_restep < back_slope_steps*2+2) - min_restep = back_slope_steps*2+2; -/* steps of table 0*/ - r = sanei_genesys_get_address (reg, REG_FWDSTEP); - r->value = min_restep - slow_slope_steps*2; -/* steps of table 1*/ - r = sanei_genesys_get_address (reg, REG_BWDSTEP); - r->value = min_restep - back_slope_steps*2; - -/* - for z1/z2: - in dokumentation mentioned variables a-d: - a = time needed for acceleration, table 1 - b = time needed for reg 0x1f... wouldn't that be reg0x1f*exposure_time? - c = time needed for acceleration, table 1 - d = time needed for reg 0x22... wouldn't that be reg0x22*exposure_time? - z1 = (c+d-1) % exposure_time - z2 = (a+b-1) % exposure_time -*/ -/* i don't see any effect of this. i can only guess that this will enhance - sub-pixel accuracy - z1 = (slope_0_time-1) % exposure_time; - z2 = (slope_0_time-1) % exposure_time; -*/ - z1 = z2 = 0; - - DBG(DBG_info, "%s: z1 = %d\n", __func__, z1); - DBG(DBG_info, "%s: z2 = %d\n", __func__, z2); - r = sanei_genesys_get_address (reg, 0x60); - r->value = ((z1 >> 16) & 0xff); - r = sanei_genesys_get_address (reg, 0x61); - r->value = ((z1 >> 8) & 0xff); - r = sanei_genesys_get_address (reg, 0x62); - r->value = (z1 & 0xff); - r = sanei_genesys_get_address (reg, 0x63); - r->value = ((z2 >> 16) & 0xff); - r = sanei_genesys_get_address (reg, 0x64); - r->value = ((z2 >> 8) & 0xff); - r = sanei_genesys_get_address (reg, 0x65); - r->value = (z2 & 0xff); - - r = sanei_genesys_get_address (reg, REG1E); - r->value &= REG1E_WDTIME; - r->value |= scan_dummy; - - r = sanei_genesys_get_address (reg, 0x67); - r->value = 0x3f | (scan_step_type << 6); - - r = sanei_genesys_get_address (reg, 0x68); - r->value = 0x3f; - - r = sanei_genesys_get_address (reg, REG_STEPNO); - r->value = (slow_slope_steps >> 1) + (slow_slope_steps & 1); - - r = sanei_genesys_get_address (reg, REG_FASTNO); - r->value = (back_slope_steps >> 1) + (back_slope_steps & 1); - - r = sanei_genesys_get_address (reg, 0x69); - r->value = (slow_slope_steps >> 1) + (slow_slope_steps & 1); - - r = sanei_genesys_get_address (reg, 0x6a); - r->value = (fast_slope_steps >> 1) + (fast_slope_steps & 1); - - r = sanei_genesys_get_address (reg, 0x5f); - r->value = (fast_slope_steps >> 1) + (fast_slope_steps & 1); - - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -static int -gl841_get_dpihw(Genesys_Device * dev) -{ - GenesysRegister* r; - r = sanei_genesys_get_address(&dev->reg, 0x05); - if ((r->value & REG05_DPIHW) == REG05_DPIHW_600) - return 600; - if ((r->value & REG05_DPIHW) == REG05_DPIHW_1200) - return 1200; - if ((r->value & REG05_DPIHW) == REG05_DPIHW_2400) - return 2400; - return 0; -} - -static SANE_Status -gl841_init_optical_regs_off(Genesys_Register_Set * reg) -{ - GenesysRegister* r; - - DBGSTART; - - r = sanei_genesys_get_address(reg, 0x01); - r->value &= ~REG01_SCAN; - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -static SANE_Status -gl841_init_optical_regs_scan(Genesys_Device * dev, - const Genesys_Sensor& sensor, - Genesys_Register_Set * reg, - unsigned int exposure_time, - unsigned int used_res, - unsigned int start, - unsigned int pixels, - int channels, - int depth, - SANE_Bool half_ccd, - ColorFilter color_filter, - int flags - ) -{ - unsigned int words_per_line; - unsigned int end; - unsigned int dpiset; - GenesysRegister* r; - SANE_Status status = SANE_STATUS_GOOD; - uint16_t expavg, expr, expb, expg; - - DBG(DBG_proc, "%s : exposure_time=%d, used_res=%d, start=%d, pixels=%d, channels=%d, depth=%d, " - "half_ccd=%d, flags=%x\n", __func__, - exposure_time, - used_res, - start, - pixels, - channels, - depth, - half_ccd, - flags); - - end = start + pixels; - - status = gl841_set_fe(dev, sensor, AFE_SET); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set frontend: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* adjust used_res for chosen dpihw */ - used_res = used_res * gl841_get_dpihw(dev) / sensor.optical_res; - -/* - with half_ccd the optical resolution of the ccd is halved. We don't apply this - to dpihw, so we need to double dpiset. - - For the scanner only the ratio of dpiset and dpihw is of relevance to scale - down properly. -*/ - if (half_ccd) - dpiset = used_res * 2; - else - dpiset = used_res; - - /* gpio part.*/ - if (dev->model->gpo_type == GPO_CANONLIDE35) - { - r = sanei_genesys_get_address (reg, REG6C); - if (half_ccd) - r->value &= ~0x80; - else - r->value |= 0x80; - } - if (dev->model->gpo_type == GPO_CANONLIDE80) - { - r = sanei_genesys_get_address (reg, REG6C); - if (half_ccd) - { - r->value &= ~0x40; - r->value |= 0x20; - } - else - { - r->value &= ~0x20; - r->value |= 0x40; - } - } - - /* enable shading */ - r = sanei_genesys_get_address (reg, 0x01); - r->value |= REG01_SCAN; - if ((flags & OPTICAL_FLAG_DISABLE_SHADING) || - (dev->model->flags & GENESYS_FLAG_NO_CALIBRATION)) - r->value &= ~REG01_DVDSET; - else - r->value |= REG01_DVDSET; - - /* average looks better than deletion, and we are already set up to - use one of the average enabled resolutions - */ - r = sanei_genesys_get_address (reg, 0x03); - r->value |= REG03_AVEENB; - sanei_genesys_set_lamp_power(dev, sensor, *reg, !(flags & OPTICAL_FLAG_DISABLE_LAMP)); - - /* BW threshold */ - r = sanei_genesys_get_address (reg, 0x2e); - r->value = dev->settings.threshold; - r = sanei_genesys_get_address (reg, 0x2f); - r->value = dev->settings.threshold; - - - /* monochrome / color scan */ - r = sanei_genesys_get_address (reg, 0x04); - switch (depth) { - case 1: - r->value &= ~REG04_BITSET; - r->value |= REG04_LINEART; - break; - case 8: - r->value &= ~(REG04_LINEART | REG04_BITSET); - break; - case 16: - r->value &= ~REG04_LINEART; - r->value |= REG04_BITSET; - break; - } - - /* AFEMOD should depend on FESET, and we should set these - * bits separately */ - r->value &= ~(REG04_FILTER | REG04_AFEMOD); - if (flags & OPTICAL_FLAG_ENABLE_LEDADD) - { - r->value |= 0x10; /* no filter */ - } - else if (channels == 1) - { - switch (color_filter) - { - case ColorFilter::RED: - r->value |= 0x14; - break; - case ColorFilter::GREEN: - r->value |= 0x18; - break; - case ColorFilter::BLUE: - r->value |= 0x1c; - break; - default: - r->value |= 0x10; - break; - } - } - else - { - if (dev->model->ccd_type == CCD_PLUSTEK_3600) - { - r->value |= 0x22; /* slow color pixel by pixel */ - } - else - { - r->value |= 0x10; /* color pixel by pixel */ - } - } - - /* CIS scanners can do true gray by setting LEDADD */ - r = sanei_genesys_get_address (reg, 0x87); - r->value &= ~REG87_LEDADD; - if (flags & OPTICAL_FLAG_ENABLE_LEDADD) - { - r->value |= REG87_LEDADD; - sanei_genesys_get_double (reg, REG_EXPR, &expr); - sanei_genesys_get_double (reg, REG_EXPG, &expg); - sanei_genesys_get_double (reg, REG_EXPB, &expb); - - /* use minimal exposure for best image quality */ - expavg = expg; - if (expr < expg) - expavg = expr; - if (expb < expavg) - expavg = expb; - - sanei_genesys_set_double(&dev->reg, REG_EXPR, expavg); - sanei_genesys_set_double(&dev->reg, REG_EXPG, expavg); - sanei_genesys_set_double(&dev->reg, REG_EXPB, expavg); - } - - /* enable gamma tables */ - r = sanei_genesys_get_address (reg, 0x05); - if (flags & OPTICAL_FLAG_DISABLE_GAMMA) - r->value &= ~REG05_GMMENB; - else - r->value |= REG05_GMMENB; - - /* sensor parameters */ - sanei_gl841_setup_sensor(dev, sensor, &dev->reg, 1, half_ccd); - - r = sanei_genesys_get_address (reg, 0x29); - r->value = 255; /*<<<"magic" number, only suitable for cis*/ - - sanei_genesys_set_double(reg, REG_DPISET, dpiset); - sanei_genesys_set_double(reg, REG_STRPIXEL, start); - sanei_genesys_set_double(reg, REG_ENDPIXEL, end); - DBG(DBG_io2, "%s: STRPIXEL=%d, ENDPIXEL=%d\n", __func__, start, end); - - /* words(16bit) before gamma, conversion to 8 bit or lineart*/ - words_per_line = (pixels * dpiset) / gl841_get_dpihw(dev); - - words_per_line *= channels; - - if (depth == 1) - words_per_line = (words_per_line >> 3) + ((words_per_line & 7)?1:0); - else - words_per_line *= depth / 8; - - dev->wpl = words_per_line; - dev->bpl = words_per_line; - - r = sanei_genesys_get_address (reg, 0x35); - r->value = LOBYTE (HIWORD (words_per_line)); - r = sanei_genesys_get_address (reg, 0x36); - r->value = HIBYTE (LOWORD (words_per_line)); - r = sanei_genesys_get_address (reg, 0x37); - r->value = LOBYTE (LOWORD (words_per_line)); - - sanei_genesys_set_double(reg, REG_LPERIOD, exposure_time); - - r = sanei_genesys_get_address (reg, 0x34); - r->value = sensor.dummy_pixel; - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -static int -gl841_get_led_exposure(Genesys_Device * dev, const Genesys_Sensor& sensor) -{ - int d,r,g,b,m; - if (!dev->model->is_cis) - return 0; - d = dev->reg.find_reg(0x19).value; - - r = sensor.exposure.red; - g = sensor.exposure.green; - b = sensor.exposure.blue; - - m = r; - if (m < g) - m = g; - if (m < b) - m = b; - - return m + d; -} - -/** @brief compute exposure time - * Compute exposure time for the device and the given scan resolution, - * also compute scan_power_mode - */ -static int -gl841_exposure_time(Genesys_Device *dev, const Genesys_Sensor& sensor, - float slope_dpi, - int scan_step_type, - int start, - int used_pixels, - int *scan_power_mode) -{ -int exposure_time = 0; -int exposure_time2 = 0; -int led_exposure; - - *scan_power_mode=0; - led_exposure=gl841_get_led_exposure(dev, sensor); - exposure_time = sanei_genesys_exposure_time2( - dev, - slope_dpi, - scan_step_type, - start+used_pixels,/*+tgtime? currently done in sanei_genesys_exposure_time2 with tgtime = 32 pixel*/ - led_exposure, - *scan_power_mode); - - while(*scan_power_mode + 1 < dev->motor.power_mode_count) { - exposure_time2 = sanei_genesys_exposure_time2( - dev, - slope_dpi, - scan_step_type, - start+used_pixels,/*+tgtime? currently done in sanei_genesys_exposure_time2 with tgtime = 32 pixel*/ - led_exposure, - *scan_power_mode + 1); - if (exposure_time < exposure_time2) - break; - exposure_time = exposure_time2; - (*scan_power_mode)++; - } - - return exposure_time; -} - -/**@brief compute scan_step_type - * Try to do at least 4 steps per line. if that is impossible we will have to - * live with that. - * @param dev device - * @param yres motor resolution - */ -static int -gl841_scan_step_type(Genesys_Device *dev, int yres) -{ -int scan_step_type=0; - - /* TODO : check if there is a bug around the use of max_step_type */ - /* should be <=1, need to chek all devices entry in genesys_devices */ - if (yres*4 < dev->motor.base_ydpi || dev->motor.max_step_type <= 0) - { - scan_step_type = 0; - } - else if (yres*4 < dev->motor.base_ydpi*2 || dev->motor.max_step_type <= 1) - { - scan_step_type = 1; - } - else - { - scan_step_type = 2; - } - - /* this motor behaves differently */ - if (dev->model->motor_type==MOTOR_CANONLIDE80) - { - /* driven by 'frequency' tables ? */ - scan_step_type = 0; - } - - return scan_step_type; -} - -/* set up registers for an actual scan - * - * this function sets up the scanner to scan in normal or single line mode - */ -static -SANE_Status -gl841_init_scan_regs(Genesys_Device * dev, const Genesys_Sensor& sensor, Genesys_Register_Set * reg, - SetupParams& params) -{ - params.assert_valid(); - - int used_res; - int start, used_pixels; - int bytes_per_line; - int move; - unsigned int lincnt; - int exposure_time; - int scan_power_mode; - int i; - int stagger; - int avg; - - int slope_dpi = 0; - int dummy = 0; - int scan_step_type = 1; - int max_shift; - size_t requested_buffer_size, read_buffer_size; - - SANE_Bool half_ccd; /* false: full CCD res is used, true, half max CCD res is used */ - int optical_res; - SANE_Status status = SANE_STATUS_GOOD; - unsigned int oflags; /**> optical flags */ - - DBG(DBG_info, "%s ", __func__); - debug_dump(DBG_info, params); - -/* -results: - -for scanner: -half_ccd -start -end -dpiset -exposure_time -dummy -z1 -z2 - -for ordered_read: - dev->words_per_line - dev->read_factor - dev->requested_buffer_size - dev->read_buffer_size - dev->read_pos - dev->read_bytes_in_buffer - dev->read_bytes_left - dev->max_shift - dev->stagger - -independent of our calculated values: - dev->total_bytes_read - dev->bytes_to_read - */ - -/* half_ccd */ - /* we have 2 domains for ccd: xres below or above half ccd max dpi */ - if (sensor.get_ccd_size_divisor_for_dpi(params.xres) > 1) { - half_ccd = SANE_TRUE; - } else { - half_ccd = SANE_FALSE; - } - -/* optical_res */ - - optical_res = sensor.optical_res; - if (half_ccd) - optical_res /= 2; - -/* stagger */ - - if ((!half_ccd) && (dev->model->flags & GENESYS_FLAG_STAGGERED_LINE)) - stagger = (4 * params.yres) / dev->motor.base_ydpi; - else - stagger = 0; - DBG(DBG_info, "%s : stagger=%d lines\n", __func__, stagger); - -/* used_res */ - i = optical_res / params.xres; - -/* gl841 supports 1/1 1/2 1/3 1/4 1/5 1/6 1/8 1/10 1/12 1/15 averaging */ - - if (i < 2 || (params.flags & SCAN_FLAG_USE_OPTICAL_RES)) /* optical_res >= xres > optical_res/2 */ - used_res = optical_res; - else if (i < 3) /* optical_res/2 >= xres > optical_res/3 */ - used_res = optical_res/2; - else if (i < 4) /* optical_res/3 >= xres > optical_res/4 */ - used_res = optical_res/3; - else if (i < 5) /* optical_res/4 >= xres > optical_res/5 */ - used_res = optical_res/4; - else if (i < 6) /* optical_res/5 >= xres > optical_res/6 */ - used_res = optical_res/5; - else if (i < 8) /* optical_res/6 >= xres > optical_res/8 */ - used_res = optical_res/6; - else if (i < 10) /* optical_res/8 >= xres > optical_res/10 */ - used_res = optical_res/8; - else if (i < 12) /* optical_res/10 >= xres > optical_res/12 */ - used_res = optical_res/10; - else if (i < 15) /* optical_res/12 >= xres > optical_res/15 */ - used_res = optical_res/12; - else - used_res = optical_res/15; - - /* compute scan parameters values */ - /* pixels are allways given at half or full CCD optical resolution */ - /* use detected left margin and fixed value */ - /* start */ - /* add x coordinates */ - start = ((sensor.CCD_start_xoffset + params.startx) * used_res) / sensor.optical_res; - - /* needs to be aligned for used_res */ - start = (start * optical_res) / used_res; - - start += sensor.dummy_pixel + 1; - - if (stagger > 0) - start |= 1; - - /* in case of SHDAREA, we need to align start - * on pixel average factor, startx is different of - * 0 only when calling for function to setup for - * scan, where shading data needs to be align */ - if((dev->reg.find_reg(0x01).value & REG01_SHDAREA) != 0) - { - avg=optical_res/used_res; - start=(start/avg)*avg; - } - - /* compute correct pixels number */ - /* pixels */ - used_pixels = (params.pixels * optical_res) / params.xres; - - /* round up pixels number if needed */ - if (used_pixels * params.xres < params.pixels * optical_res) - used_pixels++; - -/* dummy */ - /* dummy lines: may not be usefull, for instance 250 dpi works with 0 or 1 - dummy line. Maybe the dummy line adds correctness since the motor runs - slower (higher dpi) - */ -/* for cis this creates better aligned color lines: -dummy \ scanned lines - 0: R G B R ... - 1: R G B - R ... - 2: R G B - - R ... - 3: R G B - - - R ... - 4: R G B - - - - R ... - 5: R G B - - - - - R ... - 6: R G B - - - - - - R ... - 7: R G B - - - - - - - R ... - 8: R G B - - - - - - - - R ... - 9: R G B - - - - - - - - - R ... - 10: R G B - - - - - - - - - - R ... - 11: R G B - - - - - - - - - - - R ... - 12: R G B - - - - - - - - - - - - R ... - 13: R G B - - - - - - - - - - - - - R ... - 14: R G B - - - - - - - - - - - - - - R ... - 15: R G B - - - - - - - - - - - - - - - R ... - -- pierre - */ - dummy = 0; - -/* slope_dpi */ -/* cis color scan is effectively a gray scan with 3 gray lines per color - line and a FILTER of 0 */ - if (dev->model->is_cis) - slope_dpi = params.yres* params.channels; - else - slope_dpi = params.yres; - - slope_dpi = slope_dpi * (1 + dummy); - - scan_step_type = gl841_scan_step_type(dev, params.yres); - exposure_time = gl841_exposure_time(dev, sensor, - slope_dpi, - scan_step_type, - start, - used_pixels, - &scan_power_mode); - DBG(DBG_info, "%s : exposure_time=%d pixels\n", __func__, exposure_time); - - /*** optical parameters ***/ - /* in case of dynamic lineart, we use an internal 8 bit gray scan - * to generate 1 lineart data */ - if(params.flags & SCAN_FLAG_DYNAMIC_LINEART) - { - params.depth=8; - } - - oflags=0; - if (params.flags & SCAN_FLAG_DISABLE_SHADING) - { - oflags |= OPTICAL_FLAG_DISABLE_SHADING; - } - if ((params.flags & SCAN_FLAG_DISABLE_GAMMA) || (params.depth==16)) - { - oflags |= OPTICAL_FLAG_DISABLE_GAMMA; - } - if (params.flags & SCAN_FLAG_DISABLE_LAMP) - { - oflags |= OPTICAL_FLAG_DISABLE_LAMP; - } - if (params.flags & SCAN_FLAG_ENABLE_LEDADD) - { - oflags |= OPTICAL_FLAG_ENABLE_LEDADD; - } - - status = gl841_init_optical_regs_scan(dev, sensor, - reg, - exposure_time, - used_res, - start, - used_pixels, - params.channels, - params.depth, - half_ccd, - params.color_filter, - oflags); - if (status != SANE_STATUS_GOOD) - { - return status; - } - -/*** motor parameters ***/ - - /* scanned area must be enlarged by max color shift needed */ - max_shift=sanei_genesys_compute_max_shift(dev, params.channels,params.yres,params.flags); - - /* lincnt */ - lincnt = params.lines + max_shift + stagger; - - /* add tl_y to base movement */ - move = params.starty; - DBG(DBG_info, "%s: move=%d steps\n", __func__, move); - - /* subtract current head position */ - move -= dev->scanhead_position_in_steps; - DBG(DBG_info, "%s: move=%d steps\n", __func__, move); - - if (move < 0) - move = 0; - - /* round it */ -/* the move is not affected by dummy -- pierre */ -/* move = ((move + dummy) / (dummy + 1)) * (dummy + 1); - DBG(DBG_info, "%s: move=%d steps\n", __func__, move);*/ - - if (params.flags & SCAN_FLAG_SINGLE_LINE) - status = gl841_init_motor_regs_off(reg, dev->model->is_cis?lincnt* params.channels:lincnt); - else - status = gl841_init_motor_regs_scan(dev, sensor, - reg, - exposure_time, - slope_dpi, - scan_step_type, - dev->model->is_cis?lincnt* params.channels:lincnt, - dummy, - move, - scan_power_mode, - (params.flags & SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE)? - MOTOR_FLAG_DISABLE_BUFFER_FULL_MOVE:0 - ); - - if (status != SANE_STATUS_GOOD) - return status; - - - /*** prepares data reordering ***/ - -/* words_per_line */ - bytes_per_line = (used_pixels * used_res) / optical_res; - bytes_per_line = (bytes_per_line * params.channels * params.depth) / 8; - - requested_buffer_size = 8 * bytes_per_line; - /* we must use a round number of bytes_per_line */ - if (requested_buffer_size > sanei_genesys_get_bulk_max_size(dev)) - requested_buffer_size = - (sanei_genesys_get_bulk_max_size(dev) / bytes_per_line) * bytes_per_line; - - read_buffer_size = - 2 * requested_buffer_size + - ((max_shift + stagger) * used_pixels * params.channels * params.depth) / 8; - - dev->read_buffer.clear(); - dev->read_buffer.alloc(read_buffer_size); - - dev->lines_buffer.clear(); - dev->lines_buffer.alloc(read_buffer_size); - - dev->shrink_buffer.clear(); - dev->shrink_buffer.alloc(requested_buffer_size); - - dev->out_buffer.clear(); - dev->out_buffer.alloc((8 * dev->settings.pixels * params.channels * params.depth) / 8); - - dev->read_bytes_left = bytes_per_line * lincnt; - - DBG(DBG_info, "%s: physical bytes to read = %lu\n", __func__, (u_long) dev->read_bytes_left); - dev->read_active = SANE_TRUE; - - dev->current_setup.params = params; - dev->current_setup.pixels = (used_pixels * used_res)/optical_res; - dev->current_setup.lines = lincnt; - dev->current_setup.depth = params.depth; - dev->current_setup.channels = params.channels; - dev->current_setup.exposure_time = exposure_time; - dev->current_setup.xres = used_res; - dev->current_setup.yres = params.yres; - dev->current_setup.ccd_size_divisor = half_ccd ? 2 : 1; - dev->current_setup.stagger = stagger; - dev->current_setup.max_shift = max_shift + stagger; - -/* TODO: should this be done elsewhere? */ - /* scan bytes to send to the frontend */ - /* theory : - target_size = - (dev->settings.pixels * dev->settings.lines * channels * depth) / 8; - but it suffers from integer overflow so we do the following: - - 1 bit color images store color data byte-wise, eg byte 0 contains - 8 bits of red data, byte 1 contains 8 bits of green, byte 2 contains - 8 bits of blue. - This does not fix the overflow, though. - 644mp*16 = 10gp, leading to an overflow - -- pierre - */ - - dev->total_bytes_read = 0; - if (params.depth == 1) - dev->total_bytes_to_read = - ((dev->settings.pixels * dev->settings.lines) / 8 + - (((dev->settings.pixels * dev->settings.lines)%8)?1:0) - ) * params.channels; - else - dev->total_bytes_to_read = - dev->settings.pixels * dev->settings.lines * params.channels * (params.depth / 8); - - DBG(DBG_info, "%s: total bytes to send = %lu\n", __func__, (u_long) dev->total_bytes_to_read); -/* END TODO */ - - DBG(DBG_proc, "%s: completed\n", __func__); - return SANE_STATUS_GOOD; -} - -static void gl841_calculate_current_setup(Genesys_Device * dev, const Genesys_Sensor& sensor) -{ - int channels; - int depth; - int start; - - int used_res; - int used_pixels; - unsigned int lincnt; - int exposure_time; - int scan_power_mode; - int i; - int stagger; - - int slope_dpi = 0; - int dummy = 0; - int scan_step_type = 1; - int max_shift; - - SANE_Bool half_ccd; /* false: full CCD res is used, true, half max CCD res is used */ - int optical_res; - - DBG(DBG_info, "%s ", __func__); - debug_dump(DBG_info, dev->settings); - -/* channels */ - if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) - channels = 3; - else - channels = 1; - -/* depth */ - depth = dev->settings.depth; - if (dev->settings.scan_mode == ScanColorMode::LINEART) - depth = 1; - -/* start */ - start = SANE_UNFIX (dev->model->x_offset); - - start += dev->settings.tl_x; - - start = (start * sensor.optical_res) / MM_PER_INCH; - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = start; - params.starty = 0; // not used - params.pixels = dev->settings.pixels; - params.lines = dev->settings.lines; - params.depth = depth; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = dev->settings.scan_mode; - params.color_filter = dev->settings.color_filter; - params.flags = 0; - - DBG(DBG_info, "%s ", __func__); - debug_dump(DBG_info, params); - -/* half_ccd */ - /* we have 2 domains for ccd: xres below or above half ccd max dpi */ - if (sensor.get_ccd_size_divisor_for_dpi(params.xres) > 1) { - half_ccd = SANE_TRUE; - } else { - half_ccd = SANE_FALSE; - } - -/* optical_res */ - - optical_res = sensor.optical_res; - if (half_ccd) - optical_res /= 2; - -/* stagger */ - - if ((!half_ccd) && (dev->model->flags & GENESYS_FLAG_STAGGERED_LINE)) - stagger = (4 * params.yres) / dev->motor.base_ydpi; - else - stagger = 0; - DBG(DBG_info, "%s: stagger=%d lines\n", __func__, stagger); - -/* used_res */ - i = optical_res / params.xres; - -/* gl841 supports 1/1 1/2 1/3 1/4 1/5 1/6 1/8 1/10 1/12 1/15 averaging */ - - if (i < 2) /* optical_res >= xres > optical_res/2 */ - used_res = optical_res; - else if (i < 3) /* optical_res/2 >= xres > optical_res/3 */ - used_res = optical_res/2; - else if (i < 4) /* optical_res/3 >= xres > optical_res/4 */ - used_res = optical_res/3; - else if (i < 5) /* optical_res/4 >= xres > optical_res/5 */ - used_res = optical_res/4; - else if (i < 6) /* optical_res/5 >= xres > optical_res/6 */ - used_res = optical_res/5; - else if (i < 8) /* optical_res/6 >= xres > optical_res/8 */ - used_res = optical_res/6; - else if (i < 10) /* optical_res/8 >= xres > optical_res/10 */ - used_res = optical_res/8; - else if (i < 12) /* optical_res/10 >= xres > optical_res/12 */ - used_res = optical_res/10; - else if (i < 15) /* optical_res/12 >= xres > optical_res/15 */ - used_res = optical_res/12; - else - used_res = optical_res/15; - - /* compute scan parameters values */ - /* pixels are allways given at half or full CCD optical resolution */ - /* use detected left margin and fixed value */ - start = ((sensor.CCD_start_xoffset + params.startx) * used_res) / sensor.optical_res; - -/* needs to be aligned for used_res */ - start = (start * optical_res) / used_res; - - start += sensor.dummy_pixel + 1; - - if (stagger > 0) { - start |= 1; - } - - used_pixels = (params.pixels * optical_res) / params.xres; - - // round up pixels number if needed - if (used_pixels * params.xres < params.pixels * optical_res) { - used_pixels++; - } - - /* dummy lines: may not be usefull, for instance 250 dpi works with 0 or 1 - dummy line. Maybe the dummy line adds correctness since the motor runs - slower (higher dpi) - */ -/* for cis this creates better aligned color lines: -dummy \ scanned lines - 0: R G B R ... - 1: R G B - R ... - 2: R G B - - R ... - 3: R G B - - - R ... - 4: R G B - - - - R ... - 5: R G B - - - - - R ... - 6: R G B - - - - - - R ... - 7: R G B - - - - - - - R ... - 8: R G B - - - - - - - - R ... - 9: R G B - - - - - - - - - R ... - 10: R G B - - - - - - - - - - R ... - 11: R G B - - - - - - - - - - - R ... - 12: R G B - - - - - - - - - - - - R ... - 13: R G B - - - - - - - - - - - - - R ... - 14: R G B - - - - - - - - - - - - - - R ... - 15: R G B - - - - - - - - - - - - - - - R ... - -- pierre - */ - dummy = 0; - -/* cis color scan is effectively a gray scan with 3 gray lines per color - line and a FILTER of 0 */ - if (dev->model->is_cis) { - slope_dpi = params.yres * params.channels; - } else { - slope_dpi = params.yres; - } - - slope_dpi = slope_dpi * (1 + dummy); - - scan_step_type = gl841_scan_step_type(dev, params.yres); - exposure_time = gl841_exposure_time(dev, sensor, - slope_dpi, - scan_step_type, - start, - used_pixels, - &scan_power_mode); - DBG(DBG_info, "%s : exposure_time=%d pixels\n", __func__, exposure_time); - - /* scanned area must be enlarged by max color shift needed */ - max_shift = sanei_genesys_compute_max_shift(dev, params.channels, params.yres, 0); - - lincnt = params.lines + max_shift + stagger; - - dev->current_setup.params = params; - dev->current_setup.pixels = (used_pixels * used_res)/optical_res; - dev->current_setup.lines = lincnt; - dev->current_setup.depth = params.depth; - dev->current_setup.channels = params.channels; - dev->current_setup.exposure_time = exposure_time; - dev->current_setup.xres = used_res; - dev->current_setup.yres = params.yres; - dev->current_setup.ccd_size_divisor = half_ccd ? 2 : 1; - dev->current_setup.stagger = stagger; - dev->current_setup.max_shift = max_shift + stagger; - - DBGCOMPLETED; -} - -/*for fast power saving methods only, like disabling certain amplifiers*/ -static SANE_Status gl841_save_power(Genesys_Device * dev, SANE_Bool enable) -{ - uint8_t val; - - const auto& sensor = sanei_genesys_find_sensor_any(dev); - - DBG(DBG_proc, "%s: enable = %d\n", __func__, enable); - - if (enable) - { - if (dev->model->gpo_type == GPO_CANONLIDE35) - { -/* expect GPIO17 to be enabled, and GPIO9 to be disabled, - while GPIO8 is disabled*/ -/* final state: GPIO8 disabled, GPIO9 enabled, GPIO17 disabled, - GPIO18 disabled*/ - - sanei_genesys_read_register(dev, REG6D, &val); - sanei_genesys_write_register(dev, REG6D, val | 0x80); - - sanei_genesys_sleep_ms(1); - - /*enable GPIO9*/ - sanei_genesys_read_register(dev, REG6C, &val); - sanei_genesys_write_register(dev, REG6C, val | 0x01); - - /*disable GPO17*/ - sanei_genesys_read_register(dev, REG6B, &val); - sanei_genesys_write_register(dev, REG6B, val & ~REG6B_GPO17); - - /*disable GPO18*/ - sanei_genesys_read_register(dev, REG6B, &val); - sanei_genesys_write_register(dev, REG6B, val & ~REG6B_GPO18); - - sanei_genesys_sleep_ms(1); - - sanei_genesys_read_register(dev, REG6D, &val); - sanei_genesys_write_register(dev, REG6D, val & ~0x80); - - } - if (dev->model->gpo_type == GPO_DP685) - { - sanei_genesys_read_register(dev, REG6B, &val); - sanei_genesys_write_register(dev, REG6B, val & ~REG6B_GPO17); - dev->reg.find_reg(0x6b).value &= ~REG6B_GPO17; - dev->calib_reg.find_reg(0x6b).value &= ~REG6B_GPO17; - } - - gl841_set_fe(dev, sensor, AFE_POWER_SAVE); - - } - else - { - if (dev->model->gpo_type == GPO_CANONLIDE35) - { -/* expect GPIO17 to be enabled, and GPIO9 to be disabled, - while GPIO8 is disabled*/ -/* final state: GPIO8 enabled, GPIO9 disabled, GPIO17 enabled, - GPIO18 enabled*/ - - sanei_genesys_read_register(dev, REG6D, &val); - sanei_genesys_write_register(dev, REG6D, val | 0x80); - - sanei_genesys_sleep_ms(10); - - /*disable GPIO9*/ - sanei_genesys_read_register(dev, REG6C, &val); - sanei_genesys_write_register(dev, REG6C, val & ~0x01); - - /*enable GPIO10*/ - sanei_genesys_read_register(dev, REG6C, &val); - sanei_genesys_write_register(dev, REG6C, val | 0x02); - - /*enable GPO17*/ - sanei_genesys_read_register(dev, REG6B, &val); - sanei_genesys_write_register(dev, REG6B, val | REG6B_GPO17); - dev->reg.find_reg(0x6b).value |= REG6B_GPO17; - dev->calib_reg.find_reg(0x6b).value |= REG6B_GPO17; - - /*enable GPO18*/ - sanei_genesys_read_register(dev, REG6B, &val); - sanei_genesys_write_register(dev, REG6B, val | REG6B_GPO18); - dev->reg.find_reg(0x6b).value |= REG6B_GPO18; - dev->calib_reg.find_reg(0x6b).value |= REG6B_GPO18; - - } - if (dev->model->gpo_type == GPO_DP665 - || dev->model->gpo_type == GPO_DP685) - { - sanei_genesys_read_register(dev, REG6B, &val); - sanei_genesys_write_register(dev, REG6B, val | REG6B_GPO17); - dev->reg.find_reg(0x6b).value |= REG6B_GPO17; - dev->calib_reg.find_reg(0x6b).value |= REG6B_GPO17; - } - - } - - return SANE_STATUS_GOOD; -} - -static SANE_Status -gl841_set_powersaving (Genesys_Device * dev, - int delay /* in minutes */ ) -{ - SANE_Status status = SANE_STATUS_GOOD; - // FIXME: SEQUENTIAL not really needed in this case - Genesys_Register_Set local_reg(Genesys_Register_Set::SEQUENTIAL); - int rate, exposure_time, tgtime, time; - - DBG(DBG_proc, "%s (delay = %d)\n", __func__, delay); - - local_reg.init_reg(0x01, dev->reg.get8(0x01)); /* disable fastmode */ - local_reg.init_reg(0x03, dev->reg.get8(0x03)); /* Lamp power control */ - local_reg.init_reg(0x05, dev->reg.get8(0x05)); /*& ~REG05_BASESEL*/; /* 24 clocks/pixel */ - local_reg.init_reg(0x18, 0x00); // Set CCD type - local_reg.init_reg(0x38, 0x00); - local_reg.init_reg(0x39, 0x00); - - // period times for LPeriod, expR,expG,expB, Z1MODE, Z2MODE - local_reg.init_reg(0x1c, dev->reg.get8(0x05) & ~REG1C_TGTIME); - - if (!delay) { - local_reg.find_reg(0x03).value = local_reg.find_reg(0x03).value & 0xf0; /* disable lampdog and set lamptime = 0 */ - } else if (delay < 20) { - local_reg.find_reg(0x03).value = (local_reg.find_reg(0x03).value & 0xf0) | 0x09; /* enable lampdog and set lamptime = 1 */ - } else { - local_reg.find_reg(0x03).value = (local_reg.find_reg(0x03).value & 0xf0) | 0x0f; /* enable lampdog and set lamptime = 7 */ - } - - time = delay * 1000 * 60; /* -> msec */ - exposure_time = - (uint32_t) (time * 32000.0 / - (24.0 * 64.0 * (local_reg.find_reg(0x03).value & REG03_LAMPTIM) * - 1024.0) + 0.5); - /* 32000 = system clock, 24 = clocks per pixel */ - rate = (exposure_time + 65536) / 65536; - if (rate > 4) - { - rate = 8; - tgtime = 3; - } - else if (rate > 2) - { - rate = 4; - tgtime = 2; - } - else if (rate > 1) - { - rate = 2; - tgtime = 1; - } - else - { - rate = 1; - tgtime = 0; - } - - local_reg.find_reg(0x1c).value |= tgtime; - exposure_time /= rate; - - if (exposure_time > 65535) - exposure_time = 65535; - - local_reg.set8(0x38, exposure_time >> 8); - local_reg.set8(0x39, exposure_time & 255); /* lowbyte */ - - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - - DBG(DBG_proc, "%s: completed\n", __func__); - return status; -} - -static SANE_Status -gl841_start_action (Genesys_Device * dev) -{ - return sanei_genesys_write_register (dev, 0x0f, 0x01); -} - -static SANE_Status -gl841_stop_action (Genesys_Device * dev) -{ - Genesys_Register_Set local_reg; - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val40, val; - unsigned int loop; - - DBG(DBG_proc, "%s\n", __func__); - - status = sanei_genesys_get_status (dev, &val); - if (DBG_LEVEL >= DBG_io) - { - sanei_genesys_print_status (val); - } - - status = sanei_genesys_read_register(dev, 0x40, &val40); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); - DBGCOMPLETED; - return status; - } - - /* only stop action if needed */ - if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG)) - { - DBG(DBG_info, "%s: already stopped\n", __func__); - DBGCOMPLETED; - return SANE_STATUS_GOOD; - } - - local_reg = dev->reg; - - gl841_init_optical_regs_off(&local_reg); - - gl841_init_motor_regs_off(&local_reg,0); - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* looks like writing the right registers to zero is enough to get the chip - out of scan mode into command mode, actually triggering(writing to - register 0x0f) seems to be unnecessary */ - - loop = 10; - while (loop > 0) - { - status = sanei_genesys_read_register(dev, 0x40, &val40); - if (DBG_LEVEL >= DBG_io) - { - sanei_genesys_print_status (val); - } - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); - DBGCOMPLETED; - return status; - } - - /* if scanner is in command mode, we are done */ - if (!(val40 & REG40_DATAENB) && !(val40 & REG40_MOTMFLG)) - { - DBGCOMPLETED; - return SANE_STATUS_GOOD; - } - - sanei_genesys_sleep_ms(100); - loop--; - } - - DBGCOMPLETED; - return SANE_STATUS_IO_ERROR; -} - -static SANE_Status -gl841_get_paper_sensor(Genesys_Device * dev, SANE_Bool * paper_loaded) -{ - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val; - - status = sanei_genesys_read_register(dev, REG6D, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read gpio: %s\n", __func__, sane_strstatus(status)); - return status; - } - *paper_loaded = (val & 0x1) == 0; - return SANE_STATUS_GOOD; -} - -static SANE_Status -gl841_eject_document (Genesys_Device * dev) -{ - Genesys_Register_Set local_reg; - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val; - SANE_Bool paper_loaded; - unsigned int init_steps; - float feed_mm; - int loop; - - DBG(DBG_proc, "%s\n", __func__); - - if (dev->model->is_sheetfed == SANE_FALSE) - { - DBG(DBG_proc, "%s: there is no \"eject sheet\"-concept for non sheet fed\n", __func__); - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; - } - - - local_reg.clear(); - val = 0; - - status = sanei_genesys_get_status (dev, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read status register: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to stop motor: %s\n", __func__, sane_strstatus(status)); - return SANE_STATUS_IO_ERROR; - } - - local_reg = dev->reg; - - gl841_init_optical_regs_off(&local_reg); - - const auto& sensor = sanei_genesys_find_sensor_any(dev); - gl841_init_motor_regs(dev, sensor, &local_reg, - 65536,MOTOR_ACTION_FEED,0); - - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - try { - status = gl841_start_action (dev); - } catch (...) { - DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); - try { - gl841_stop_action(dev); - } catch (...) {} - try { - // restore original registers - sanei_genesys_bulk_write_register(dev, dev->reg); - } catch (...) {} - throw; - } - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); - gl841_stop_action (dev); - /* send original registers */ - sanei_genesys_bulk_write_register(dev, dev->reg); - return status; - } - - RIE(gl841_get_paper_sensor(dev, &paper_loaded)); - if (paper_loaded) - { - DBG(DBG_info, "%s: paper still loaded\n", __func__); - /* force document TRUE, because it is definitely present */ - dev->document = SANE_TRUE; - dev->scanhead_position_in_steps = 0; - - loop = 300; - while (loop > 0) /* do not wait longer then 30 seconds */ - { - - RIE(gl841_get_paper_sensor(dev, &paper_loaded)); - - if (!paper_loaded) - { - DBG(DBG_info, "%s: reached home position\n", __func__); - DBG(DBG_proc, "%s: finished\n", __func__); - break; - } - sanei_genesys_sleep_ms(100); - --loop; - } - - if (loop == 0) - { - /* when we come here then the scanner needed too much time for this, so we better stop the motor */ - gl841_stop_action (dev); - DBG(DBG_error, "%s: timeout while waiting for scanhead to go home\n", __func__); - return SANE_STATUS_IO_ERROR; - } - } - - feed_mm = SANE_UNFIX(dev->model->eject_feed); - if (dev->document) - { - feed_mm += SANE_UNFIX(dev->model->post_scan); - } - - status = sanei_genesys_read_feed_steps(dev, &init_steps); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read feed steps: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* now feed for extra steps */ - loop = 0; - while (loop < 300) /* do not wait longer then 30 seconds */ - { - unsigned int steps; - - status = sanei_genesys_read_feed_steps(dev, &steps); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read feed steps: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_info, "%s: init_steps: %d, steps: %d\n", __func__, init_steps, steps); - - if (steps > init_steps + (feed_mm * dev->motor.base_ydpi) / MM_PER_INCH) - { - break; - } - - sanei_genesys_sleep_ms(100); - ++loop; - } - - status = gl841_stop_action(dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to stop motor: %s\n", __func__, sane_strstatus(status)); - return status; - } - - dev->document = SANE_FALSE; - - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; -} - - -static SANE_Status -gl841_load_document (Genesys_Device * dev) -{ - SANE_Status status = SANE_STATUS_GOOD; - SANE_Bool paper_loaded; - int loop = 300; - DBG(DBG_proc, "%s\n", __func__); - while (loop > 0) /* do not wait longer then 30 seconds */ - { - - RIE(gl841_get_paper_sensor(dev, &paper_loaded)); - - if (paper_loaded) - { - DBG(DBG_info, "%s: document inserted\n", __func__); - - /* when loading OK, document is here */ - dev->document = SANE_TRUE; - - // give user some time to place document correctly - sanei_genesys_sleep_ms(1000); - break; - } - sanei_genesys_sleep_ms(100); - --loop; - } - - if (loop == 0) - { - /* when we come here then the user needed to much time for this */ - DBG(DBG_error, "%s: timeout while waiting for document\n", __func__); - return SANE_STATUS_IO_ERROR; - } - - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; -} - -/** - * detects end of document and adjust current scan - * to take it into account - * used by sheetfed scanners - */ -static SANE_Status -gl841_detect_document_end (Genesys_Device * dev) -{ - SANE_Status status = SANE_STATUS_GOOD; - SANE_Bool paper_loaded; - unsigned int scancnt = 0, lincnt, postcnt; - uint8_t val; - size_t total_bytes_to_read; - - DBG(DBG_proc, "%s: begin\n", __func__); - - RIE (gl841_get_paper_sensor (dev, &paper_loaded)); - - /* sheetfed scanner uses home sensor as paper present */ - if ((dev->document == SANE_TRUE) && !paper_loaded) - { - DBG(DBG_info, "%s: no more document\n", __func__); - dev->document = SANE_FALSE; - - /* we can't rely on total_bytes_to_read since the frontend - * might have been slow to read data, so we re-evaluate the - * amount of data to scan form the hardware settings - */ - try { - status = sanei_genesys_read_scancnt(dev, &scancnt); - } catch (...) { - dev->total_bytes_to_read = dev->total_bytes_read; - dev->read_bytes_left = 0; - throw; - } - - if(status!=SANE_STATUS_GOOD) - { - dev->total_bytes_to_read = dev->total_bytes_read; - dev->read_bytes_left = 0; - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; - } - if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS && dev->model->is_cis) - { - scancnt/=3; - } - DBG(DBG_io, "%s: scancnt=%u lines\n", __func__, scancnt); - - RIE(sanei_genesys_read_register(dev, 0x25, &val)); - lincnt=65536*val; - RIE(sanei_genesys_read_register(dev, 0x26, &val)); - lincnt+=256*val; - RIE(sanei_genesys_read_register(dev, 0x27, &val)); - lincnt+=val; - DBG(DBG_io, "%s: lincnt=%u lines\n", __func__, lincnt); - postcnt=(SANE_UNFIX(dev->model->post_scan)/MM_PER_INCH)*dev->settings.yres; - DBG(DBG_io, "%s: postcnt=%u lines\n", __func__, postcnt); - - /* the current scancnt is also the final one, so we use it to - * compute total bytes to read. We also add the line count to eject document */ - total_bytes_to_read=(scancnt+postcnt)*dev->wpl; - - DBG(DBG_io, "%s: old total_bytes_to_read=%u\n", __func__, - (unsigned int)dev->total_bytes_to_read); - DBG(DBG_io, "%s: new total_bytes_to_read=%u\n", __func__, (unsigned int)total_bytes_to_read); - - /* assign new end value */ - if(dev->total_bytes_to_read>total_bytes_to_read) - { - DBG(DBG_io, "%s: scan shorten\n", __func__); - dev->total_bytes_to_read=total_bytes_to_read; - } - } - - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; -} - -/* Send the low-level scan command */ -/* todo : is this that useful ? */ -static SANE_Status -gl841_begin_scan (Genesys_Device * dev, const Genesys_Sensor& sensor, Genesys_Register_Set * reg, - SANE_Bool start_motor) -{ - (void) sensor; - SANE_Status status = SANE_STATUS_GOOD; - // FIXME: SEQUENTIAL not really needed in this case - Genesys_Register_Set local_reg(Genesys_Register_Set::SEQUENTIAL); - uint8_t val; - - DBG(DBG_proc, "%s\n", __func__); - - if (dev->model->gpo_type == GPO_CANONLIDE80) - { - RIE (sanei_genesys_read_register (dev, REG6B, &val)); - val = REG6B_GPO18; - RIE (sanei_genesys_write_register (dev, REG6B, val)); - } - - if (dev->model->ccd_type != CCD_PLUSTEK_3600) { - local_reg.init_reg(0x03, sanei_genesys_read_reg_from_set(reg, 0x03) | REG03_LAMPPWR); - } else { - // TODO PLUSTEK_3600: why ?? - local_reg.init_reg(0x03, sanei_genesys_read_reg_from_set(reg, 0x03)); - } - - local_reg.init_reg(0x01, sanei_genesys_read_reg_from_set(reg, 0x01) | REG01_SCAN); /* set scan bit */ - local_reg.init_reg(0x0d, 0x01); - - if (start_motor) { - local_reg.init_reg(0x0f, 0x01); - } else { - // do not start motor yet - local_reg.init_reg(0x0f, 0x00); - } - - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_proc, "%s: completed\n", __func__); - - return status; -} - - -/* Send the stop scan command */ -static SANE_Status -gl841_end_scan (Genesys_Device * dev, Genesys_Register_Set __sane_unused__ * reg, - SANE_Bool check_stop) -{ - SANE_Status status = SANE_STATUS_GOOD; - - DBG(DBG_proc, "%s (check_stop = %d)\n", __func__, check_stop); - - if (dev->model->is_sheetfed == SANE_TRUE) - { - status = SANE_STATUS_GOOD; - } - else /* flat bed scanners */ - { - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to stop: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - - DBG(DBG_proc, "%s: completed\n", __func__); - - return status; -} - -/* Moves the slider to steps */ -static SANE_Status -gl841_feed (Genesys_Device * dev, int steps) -{ - Genesys_Register_Set local_reg; - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val; - int loop; - - DBG(DBG_proc, "%s (steps = %d)\n", __func__, steps); - - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to stop action: %s\n", __func__, sane_strstatus(status)); - return status; - } - - // FIXME: we should pick sensor according to the resolution scanner is currently operating on - const auto& sensor = sanei_genesys_find_sensor_any(dev); - - local_reg = dev->reg; - - gl841_init_optical_regs_off(&local_reg); - - gl841_init_motor_regs(dev, sensor, &local_reg, steps,MOTOR_ACTION_FEED,0); - - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - try { - status = gl841_start_action (dev); - } catch (...) { - DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); - try { - gl841_stop_action (dev); - } catch (...) {} - try { - // send original registers - sanei_genesys_bulk_write_register(dev, dev->reg); - } catch (...) {} - throw; - } - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); - gl841_stop_action (dev); - /* send original registers */ - sanei_genesys_bulk_write_register(dev, dev->reg); - return status; - } - - loop = 0; - while (loop < 300) /* do not wait longer then 30 seconds */ - { - status = sanei_genesys_get_status (dev, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); - return status; - } - - if (!(val & REG41_MOTORENB)) /* motor enabled */ - { - DBG(DBG_proc, "%s: finished\n", __func__); - dev->scanhead_position_in_steps += steps; - return SANE_STATUS_GOOD; - } - sanei_genesys_sleep_ms(100); - ++loop; - } - - /* when we come here then the scanner needed too much time for this, so we better stop the motor */ - gl841_stop_action (dev); - - DBG(DBG_error, "%s: timeout while waiting for scanhead to go home\n", __func__); - return SANE_STATUS_IO_ERROR; -} - -/* Moves the slider to the home (top) position slowly */ -static SANE_Status -gl841_slow_back_home (Genesys_Device * dev, SANE_Bool wait_until_home) -{ - Genesys_Register_Set local_reg; - SANE_Status status = SANE_STATUS_GOOD; - GenesysRegister *r; - uint8_t val; - int loop = 0; - - DBG(DBG_proc, "%s (wait_until_home = %d)\n", __func__, wait_until_home); - - if (dev->model->is_sheetfed == SANE_TRUE) - { - DBG(DBG_proc, "%s: there is no \"home\"-concept for sheet fed\n", __func__); - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; - } - - /* reset gpio pin */ - if (dev->model->gpo_type == GPO_CANONLIDE35) - { - RIE (sanei_genesys_read_register (dev, REG6C, &val)); - val = dev->gpo.value[0]; - RIE (sanei_genesys_write_register (dev, REG6C, val)); - } - if (dev->model->gpo_type == GPO_CANONLIDE80) - { - RIE (sanei_genesys_read_register (dev, REG6B, &val)); - val = REG6B_GPO18 | REG6B_GPO17; - RIE (sanei_genesys_write_register (dev, REG6B, val)); - } - gl841_save_power(dev, SANE_FALSE); - - /* first read gives HOME_SENSOR true */ - status = sanei_genesys_get_status (dev, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); - return status; - } - if (DBG_LEVEL >= DBG_io) - { - sanei_genesys_print_status (val); - } - sanei_genesys_sleep_ms(100); - - /* second is reliable */ - status = sanei_genesys_get_status (dev, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, sane_strstatus(status)); - return status; - } - if (DBG_LEVEL >= DBG_io) - { - sanei_genesys_print_status (val); - } - - dev->scanhead_position_in_steps = 0; - - if (val & REG41_HOMESNR) /* is sensor at home? */ - { - DBG(DBG_info, "%s: already at home, completed\n", __func__); - dev->scanhead_position_in_steps = 0; - return SANE_STATUS_GOOD; - } - - /* end previous scan if any */ - r = sanei_genesys_get_address(&dev->reg, REG01); - r->value &= ~REG01_SCAN; - status = sanei_genesys_write_register (dev, REG01, r->value); - - /* if motor is on, stop current action */ - if (val & REG41_MOTORENB) - { - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to stop motor: %s\n", __func__, sane_strstatus(status)); - return SANE_STATUS_IO_ERROR; - } - } - - local_reg = dev->reg; - - const auto& sensor = sanei_genesys_find_sensor_any(dev); - - gl841_init_motor_regs(dev, sensor, &local_reg, 65536,MOTOR_ACTION_GO_HOME,0); - - /* set up for reverse and no scan */ - r = sanei_genesys_get_address(&local_reg, REG02); - r->value |= REG02_MTRREV; - r = sanei_genesys_get_address(&local_reg, REG01); - r->value &= ~REG01_SCAN; - - RIE (sanei_genesys_bulk_write_register(dev, local_reg)); - - try { - status = gl841_start_action (dev); - } catch (...) { - DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); - try { - gl841_stop_action(dev); - } catch (...) {} - try { - sanei_genesys_bulk_write_register(dev, dev->reg); - } catch (...) {} - throw; - } - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to start motor: %s\n", __func__, sane_strstatus(status)); - gl841_stop_action (dev); - /* send original registers */ - sanei_genesys_bulk_write_register(dev, dev->reg); - return status; - } - - if (wait_until_home) - { - while (loop < 300) /* do not wait longer then 30 seconds */ - { - status = sanei_genesys_get_status (dev, &val); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read home sensor: %s\n", __func__, - sane_strstatus(status)); - return status; - } - - if (val & REG41_HOMESNR) /* home sensor */ - { - DBG(DBG_info, "%s: reached home position\n", __func__); - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; - } - sanei_genesys_sleep_ms(100); - ++loop; - } - - /* when we come here then the scanner needed too much time for this, so we better stop the motor */ - gl841_stop_action (dev); - DBG(DBG_error, "%s: timeout while waiting for scanhead to go home\n", __func__); - return SANE_STATUS_IO_ERROR; - } - - DBG(DBG_info, "%s: scanhead is still moving\n", __func__); - DBG(DBG_proc, "%s: finished\n", __func__); - return SANE_STATUS_GOOD; -} - -/* Automatically set top-left edge of the scan area by scanning a 200x200 pixels - area at 600 dpi from very top of scanner */ -static SANE_Status -gl841_search_start_position (Genesys_Device * dev) -{ - int size; - SANE_Status status = SANE_STATUS_GOOD; - Genesys_Register_Set local_reg; - int steps; - - int pixels = 600; - int dpi = 300; - - DBGSTART; - - local_reg = dev->reg; - - /* sets for a 200 lines * 600 pixels */ - /* normal scan with no shading */ - - // FIXME: the current approach of doing search only for one resolution does not work on scanners - // whith employ different sensors with potentially different settings. - auto& sensor = sanei_genesys_find_sensor_for_write(dev, dpi); - - SetupParams params; - params.xres = dpi; - params.yres = dpi; - params.startx = 0; - params.starty = 0; /*we should give a small offset here~60 steps*/ - params.pixels = 600; - params.lines = dev->model->search_lines; - params.depth = 8; - params.channels = 1; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::GRAY; - params.color_filter = ColorFilter::GREEN; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE; - - status = gl841_init_scan_regs(dev, sensor, &local_reg, params); - - if(status!=SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to init scan registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* send to scanner */ - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - size = pixels * dev->model->search_lines; - - std::vector data(size); - - status = gl841_begin_scan(dev, sensor, &local_reg, SANE_TRUE); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to begin scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* waits for valid data */ - do - sanei_genesys_test_buffer_empty (dev, &steps); - while (steps); - - /* now we're on target, we can read data */ - status = sanei_genesys_read_data_from_scanner(dev, data.data(), size); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read data: %s\n", __func__, sane_strstatus(status)); - return status; - } - - if (DBG_LEVEL >= DBG_data) - sanei_genesys_write_pnm_file("gl841_search_position.pnm", data.data(), 8, 1, pixels, - dev->model->search_lines); - - status = gl841_end_scan(dev, &local_reg, SANE_TRUE); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to end scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* update regs to copy ASIC internal state */ - dev->reg = local_reg; - -/*TODO: find out where sanei_genesys_search_reference_point - stores information, and use that correctly*/ - status = - sanei_genesys_search_reference_point (dev, sensor, data.data(), 0, dpi, pixels, - dev->model->search_lines); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set search reference point: %s\n", __func__, - sane_strstatus(status)); - return status; - } - - return SANE_STATUS_GOOD; -} - -/* - * sets up register for coarse gain calibration - * todo: check it for scanners using it */ -static SANE_Status -gl841_init_regs_for_coarse_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set& regs) -{ - SANE_Status status = SANE_STATUS_GOOD; - uint8_t channels; - uint8_t cksel; - - DBGSTART; - - cksel = (regs.find_reg(0x18).value & REG18_CKSEL) + 1; /* clock speed = 1..4 clocks */ - - /* set line size */ - if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) - channels = 3; - else { - channels = 1; - } - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = 0; - params.starty = 0; - params.pixels = sensor.optical_res / cksel; /* XXX STEF XXX !!! */ - params.lines = 20; - params.depth = 16; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = dev->settings.scan_mode; - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_info, "%s: optical sensor res: %d dpi, actual res: %d\n", __func__, - sensor.optical_res / cksel, dev->settings.xres); - - status = sanei_genesys_bulk_write_register(dev, regs); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - -/* if (DBG_LEVEL >= DBG_info) - sanei_gl841_print_registers (regs);*/ - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - - -/* init registers for shading calibration */ -static SANE_Status -gl841_init_regs_for_shading(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set& regs) -{ - SANE_Status status = SANE_STATUS_GOOD; - SANE_Int ydpi; - float starty=0; - - DBGSTART; - DBG(DBG_proc, "%s: lines = %d\n", __func__, (int)(dev->calib_lines)); - - /* initial calibration reg values */ - regs = dev->reg; - - ydpi = dev->motor.base_ydpi; - if (dev->model->motor_type == MOTOR_PLUSTEK_3600) /* TODO PLUSTEK_3600: 1200dpi not yet working, produces dark bar */ - { - ydpi = 600; - } - if (dev->model->motor_type == MOTOR_CANONLIDE80) - { - ydpi = gl841_get_dpihw(dev); - /* get over extra dark area for this model. - It looks like different devices have dark areas of different width - due to manufacturing variability. The initial value of starty was 140, - but it moves the sensor almost past the dark area completely in places - on certain devices. - - On a particular device the black area starts at roughly position - 160 to 230 depending on location (the dark area is not completely - parallel to the frame). - */ - starty = 70; - } - - dev->calib_channels = 3; - dev->calib_lines = dev->model->shading_lines; - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = ydpi; - params.startx = 0; - params.starty = starty; - params.pixels = (sensor.sensor_pixels * dev->settings.xres) / sensor.optical_res; - params.lines = dev->calib_lines; - params.depth = 16; - params.channels = dev->calib_channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_USE_OPTICAL_RES | - /*SCAN_FLAG_DISABLE_BUFFER_FULL_MOVE |*/ - SCAN_FLAG_IGNORE_LINE_DISTANCE; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - dev->calib_pixels = dev->current_setup.pixels; - dev->scanhead_position_in_steps += dev->calib_lines + starty; - - status = sanei_genesys_bulk_write_register(dev, regs); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -/* set up registers for the actual scan - */ -static SANE_Status -gl841_init_regs_for_scan (Genesys_Device * dev, const Genesys_Sensor& sensor) -{ - int channels; - int flags; - int depth; - float move; - int move_dpi; - float start; - - SANE_Status status = SANE_STATUS_GOOD; - - DBG(DBG_info, "%s ", __func__); - debug_dump(DBG_info, dev->settings); - -/* channels */ - if (dev->settings.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) - channels = 3; - else - channels = 1; - -/* depth */ - depth = dev->settings.depth; - if (dev->settings.scan_mode == ScanColorMode::LINEART) - depth = 1; - - - /* steps to move to reach scanning area: - - first we move to physical start of scanning - either by a fixed steps amount from the black strip - or by a fixed amount from parking position, - minus the steps done during shading calibration - - then we move by the needed offset whitin physical - scanning area - - assumption: steps are expressed at maximum motor resolution - - we need: - SANE_Fixed y_offset; - SANE_Fixed y_size; - SANE_Fixed y_offset_calib; - mm_to_steps()=motor dpi / 2.54 / 10=motor dpi / MM_PER_INCH */ - - /* if scanner uses GENESYS_FLAG_SEARCH_START y_offset is - relative from origin, else, it is from parking position */ - - move_dpi = dev->motor.base_ydpi; - - move = 0; - if (dev->model->flags & GENESYS_FLAG_SEARCH_START) - { - move += SANE_UNFIX (dev->model->y_offset_calib); - } - - DBG(DBG_info, "%s move=%f steps\n", __func__, move); - - move += SANE_UNFIX (dev->model->y_offset); - DBG(DBG_info, "%s: move=%f steps\n", __func__, move); - - move += dev->settings.tl_y; - DBG(DBG_info, "%s: move=%f steps\n", __func__, move); - - move = (move * move_dpi) / MM_PER_INCH; - -/* start */ - start = SANE_UNFIX (dev->model->x_offset); - - start += dev->settings.tl_x; - - start = (start * sensor.optical_res) / MM_PER_INCH; - - flags=0; - - /* we enable true gray for cis scanners only, and just when doing - * scan since color calibration is OK for this mode - */ - flags = 0; - - /* true gray (led add for cis scanners) */ - if(dev->model->is_cis && dev->settings.true_gray - && dev->settings.scan_mode != ScanColorMode::COLOR_SINGLE_PASS - && dev->model->ccd_type != CIS_CANONLIDE80) - { - // on Lide 80 the LEDADD bit results in only red LED array being lit - DBG(DBG_io, "%s: activating LEDADD\n", __func__); - flags |= SCAN_FLAG_ENABLE_LEDADD; - } - - /* enable emulated lineart from gray data */ - if(dev->settings.scan_mode == ScanColorMode::LINEART - && dev->settings.dynamic_lineart) - { - flags |= SCAN_FLAG_DYNAMIC_LINEART; - } - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = start; - params.starty = move; - params.pixels = dev->settings.pixels; - params.lines = dev->settings.lines; - params.depth = depth; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = dev->settings.scan_mode; - params.color_filter = dev->settings.color_filter; - params.flags = flags; - - status = gl841_init_scan_regs(dev, sensor, &dev->reg, params); - - if (status != SANE_STATUS_GOOD) - return status; - - - DBG(DBG_proc, "%s: completed\n", __func__); - return SANE_STATUS_GOOD; -} - -/* - * this function sends generic gamma table (ie linear ones) - * or the Sensor specific one if provided - */ -static SANE_Status -gl841_send_gamma_table(Genesys_Device * dev, const Genesys_Sensor& sensor) -{ - int size; - SANE_Status status = SANE_STATUS_GOOD; - - DBGSTART; - - size = 256; - - /* allocate temporary gamma tables: 16 bits words, 3 channels */ - std::vector gamma(size * 2 * 3); - - RIE(sanei_genesys_generate_gamma_buffer(dev, sensor, 16, 65535, size, gamma.data())); - - /* send address */ - status = gl841_set_buffer_address_gamma (dev, 0x00000); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* send data */ - status = sanei_genesys_bulk_write_data(dev, 0x28, gamma.data(), size * 2 * 3); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to send gamma table: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - - -/* this function does the led calibration by scanning one line of the calibration - area below scanner's top on white strip. - --needs working coarse/gain -*/ -static SANE_Status -gl841_led_calibration (Genesys_Device * dev, Genesys_Sensor& sensor, Genesys_Register_Set& regs) -{ - int num_pixels; - int total_size; - int i, j; - SANE_Status status = SANE_STATUS_GOOD; - int val; - int channels; - int avg[3], avga, avge; - int turn; - uint16_t exp[3], target; - int move; - - SANE_Bool acceptable = SANE_FALSE; - - /* these 2 boundaries should be per sensor */ - uint16_t min_exposure=500; - uint16_t max_exposure; - - DBGSTART; - - /* feed to white strip if needed */ - if (dev->model->y_offset_calib>0) - { - move = SANE_UNFIX (dev->model->y_offset_calib); - move = (move * (dev->motor.base_ydpi)) / MM_PER_INCH; - DBG(DBG_io, "%s: move=%d lines\n", __func__, move); - status = gl841_feed(dev, move); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to feed: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - - /* offset calibration is always done in color mode */ - channels = 3; - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = 0; - params.starty = 0; - params.pixels = (sensor.sensor_pixels*dev->settings.xres) / sensor.optical_res; - params.lines = 1; - params.depth = 16; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_USE_OPTICAL_RES; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - RIE(sanei_genesys_bulk_write_register(dev, regs)); - - num_pixels = dev->current_setup.pixels; - - total_size = num_pixels * channels * 2 * 1; /* colors * bytes_per_color * scan lines */ - - std::vector line(total_size); - -/* - we try to get equal bright leds here: - - loop: - average per color - adjust exposure times - */ - - exp[0] = sensor.exposure.red; - exp[1] = sensor.exposure.green; - exp[2] = sensor.exposure.blue; - - turn = 0; - /* max exposure is set to ~2 time initial average - * exposure, or 2 time last calibration exposure */ - max_exposure=((exp[0]+exp[1]+exp[2])/3)*2; - target=sensor.gain_white_ref*256; - - do { - sensor.exposure.red = exp[0]; - sensor.exposure.green = exp[1]; - sensor.exposure.blue = exp[2]; - - sanei_genesys_set_exposure(regs, sensor.exposure); - RIE(sanei_genesys_write_register(dev, 0x10, (sensor.exposure.red >> 8) & 0xff)); - RIE(sanei_genesys_write_register(dev, 0x11, sensor.exposure.red & 0xff)); - RIE(sanei_genesys_write_register(dev, 0x12, (sensor.exposure.green >> 8) & 0xff)); - RIE(sanei_genesys_write_register(dev, 0x13, sensor.exposure.green & 0xff)); - RIE(sanei_genesys_write_register(dev, 0x14, (sensor.exposure.blue >> 8) & 0xff)); - RIE(sanei_genesys_write_register(dev, 0x15, sensor.exposure.blue & 0xff)); - - RIE(sanei_genesys_bulk_write_register(dev, regs)); - - DBG(DBG_info, "%s: starting line reading\n", __func__); - RIE(gl841_begin_scan(dev, sensor, ®s, SANE_TRUE)); - RIE(sanei_genesys_read_data_from_scanner(dev, line.data(), total_size)); - - if (DBG_LEVEL >= DBG_data) { - char fn[30]; - snprintf(fn, 30, "gl841_led_%d.pnm", turn); - sanei_genesys_write_pnm_file(fn, line.data(), 16, channels, num_pixels, 1); - } - - /* compute average */ - for (j = 0; j < channels; j++) - { - avg[j] = 0; - for (i = 0; i < num_pixels; i++) - { - if (dev->model->is_cis) - val = - line[i * 2 + j * 2 * num_pixels + 1] * 256 + - line[i * 2 + j * 2 * num_pixels]; - else - val = - line[i * 2 * channels + 2 * j + 1] * 256 + - line[i * 2 * channels + 2 * j]; - avg[j] += val; - } - - avg[j] /= num_pixels; - } - - DBG(DBG_info,"%s: average: %d,%d,%d\n", __func__, avg[0], avg[1], avg[2]); - - acceptable = SANE_TRUE; - - /* exposure is acceptable if each color is in the %5 range - * of other color channels */ - if (avg[0] < avg[1] * 0.95 || avg[1] < avg[0] * 0.95 || - avg[0] < avg[2] * 0.95 || avg[2] < avg[0] * 0.95 || - avg[1] < avg[2] * 0.95 || avg[2] < avg[1] * 0.95) - { - acceptable = SANE_FALSE; - } - - /* led exposure is not acceptable if white level is too low - * ~80 hardcoded value for white level */ - if(avg[0]<20000 || avg[1]<20000 || avg[2]<20000) - { - acceptable = SANE_FALSE; - } - - /* for scanners using target value */ - if(target>0) - { - acceptable = SANE_TRUE; - for(i=0;i<3;i++) - { - /* we accept +- 2% delta from target */ - if(abs(avg[i]-target)>target/50) - { - exp[i]=(exp[i]*target)/avg[i]; - acceptable = SANE_FALSE; - } - } - } - else - { - if (!acceptable) - { - avga = (avg[0]+avg[1]+avg[2])/3; - exp[0] = (exp[0] * avga) / avg[0]; - exp[1] = (exp[1] * avga) / avg[1]; - exp[2] = (exp[2] * avga) / avg[2]; - /* - keep the resulting exposures below this value. - too long exposure drives the ccd into saturation. - we may fix this by relying on the fact that - we get a striped scan without shading, by means of - statistical calculation - */ - avge = (exp[0] + exp[1] + exp[2]) / 3; - - if (avge > max_exposure) { - exp[0] = (exp[0] * max_exposure) / avge; - exp[1] = (exp[1] * max_exposure) / avge; - exp[2] = (exp[2] * max_exposure) / avge; - } - if (avge < min_exposure) { - exp[0] = (exp[0] * min_exposure) / avge; - exp[1] = (exp[1] * min_exposure) / avge; - exp[2] = (exp[2] * min_exposure) / avge; - } - - } - } - - RIE (gl841_stop_action (dev)); - - turn++; - - } while (!acceptable && turn < 100); - - DBG(DBG_info,"%s: acceptable exposure: %d,%d,%d\n", __func__, exp[0], exp[1], exp[2]); - - gl841_slow_back_home(dev, SANE_TRUE); - - DBGCOMPLETED; - return status; -} - -/** @brief calibration for AD frontend devices - * offset calibration assumes that the scanning head is on a black area - * For LiDE80 analog frontend - * 0x0003 : is gain and belongs to [0..63] - * 0x0006 : is offset - * We scan a line with no gain until average offset reaches the target - */ -static SANE_Status -ad_fe_offset_calibration (Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set& regs) -{ - SANE_Status status = SANE_STATUS_GOOD; - int num_pixels; - int total_size; - int i; - int average; - int turn; - int top; - int bottom; - int target; - - DBGSTART; - - /* don't impact 3600 behavior since we can't test it */ - if (dev->model->ccd_type == CCD_PLUSTEK_3600) - { - DBGCOMPLETED; - return status; - } - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = 0; - params.starty = 0; - params.pixels = (sensor.sensor_pixels*dev->settings.xres) / sensor.optical_res; - params.lines = 1; - params.depth = 8; - params.channels = 3; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_USE_OPTICAL_RES; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - num_pixels = dev->current_setup.pixels; - total_size = num_pixels * 3 * 2 * 1; - - std::vector line(total_size); - - dev->frontend.set_gain(0, 0); - dev->frontend.set_gain(1, 0); - dev->frontend.set_gain(2, 0); - - /* loop on scan until target offset is reached */ - turn=0; - target=24; - bottom=0; - top=255; - do { - /* set up offset mid range */ - dev->frontend.set_offset(0, (top + bottom) / 2); - dev->frontend.set_offset(1, (top + bottom) / 2); - dev->frontend.set_offset(2, (top + bottom) / 2); - - /* scan line */ - DBG(DBG_info, "%s: starting line reading\n", __func__); - sanei_genesys_bulk_write_register(dev, regs); - gl841_set_fe(dev, sensor, AFE_SET); - gl841_begin_scan(dev, sensor, ®s, SANE_TRUE); - sanei_genesys_read_data_from_scanner(dev, line.data(), total_size); - gl841_stop_action (dev); - if (DBG_LEVEL >= DBG_data) { - char fn[30]; - snprintf(fn, 30, "gl841_offset_%02d.pnm", turn); - sanei_genesys_write_pnm_file(fn, line.data(), 8, 3, num_pixels, 1); - } - - /* search for minimal value */ - average=0; - for(i=0;itarget) - { - top=(top+bottom)/2; - } - else - { - bottom=(top+bottom)/2; - } - turn++; - } while ((top-bottom)>1 && turn < 100); - - // FIXME: don't overwrite the calibrated values - dev->frontend.set_offset(0, 0); - dev->frontend.set_offset(1, 0); - dev->frontend.set_offset(2, 0); - DBG(DBG_info, "%s: offset=(%d,%d,%d)\n", __func__, - dev->frontend.get_offset(0), - dev->frontend.get_offset(1), - dev->frontend.get_offset(2)); - DBGCOMPLETED; - return status; -} - -/* this function does the offset calibration by scanning one line of the calibration - area below scanner's top. There is a black margin and the remaining is white. - sanei_genesys_search_start() must have been called so that the offsets and margins - are allready known. - -this function expects the slider to be where? -*/ -static SANE_Status -gl841_offset_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set& regs) -{ - int num_pixels; - int total_size; - int i, j; - SANE_Status status = SANE_STATUS_GOOD; - int val; - int channels; - int off[3],offh[3],offl[3],off1[3],off2[3]; - int min1[3],min2[3]; - int cmin[3],cmax[3]; - int turn; - SANE_Bool acceptable = SANE_FALSE; - int mintgt = 0x400; - - DBG(DBG_proc, "%s\n", __func__); - - /* Analog Device fronted have a different calibration */ - if ((dev->reg.find_reg(0x04).value & REG04_FESET) == 0x02) - { - return ad_fe_offset_calibration(dev, sensor, regs); - } - - /* offset calibration is always done in color mode */ - channels = 3; - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = 0; - params.starty = 0; - params.pixels = (sensor.sensor_pixels*dev->settings.xres) / sensor.optical_res; - params.lines = 1; - params.depth = 16; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_USE_OPTICAL_RES | - SCAN_FLAG_DISABLE_LAMP; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - num_pixels = dev->current_setup.pixels; - - total_size = num_pixels * channels * 2 * 1; /* colors * bytes_per_color * scan lines */ - - std::vector first_line(total_size); - std::vector second_line(total_size); - - /* scan first line of data with no offset nor gain */ -/*WM8199: gain=0.73; offset=-260mV*/ -/*okay. the sensor black level is now at -260mV. we only get 0 from AFE...*/ -/* we should probably do real calibration here: - * -detect acceptable offset with binary search - * -calculate offset from this last version - * - * acceptable offset means - * - few completely black pixels(<10%?) - * - few completely white pixels(<10%?) - * - * final offset should map the minimum not completely black - * pixel to 0(16 bits) - * - * this does account for dummy pixels at the end of ccd - * this assumes slider is at black strip(which is not quite as black as "no - * signal"). - * - */ - dev->frontend.set_gain(0, 0); - dev->frontend.set_gain(1, 0); - dev->frontend.set_gain(2, 0); - offh[0] = 0xff; - offh[1] = 0xff; - offh[2] = 0xff; - offl[0] = 0x00; - offl[1] = 0x00; - offl[2] = 0x00; - turn = 0; - - do { - - RIE(sanei_genesys_bulk_write_register(dev, regs)); - - for (j=0; j < channels; j++) { - off[j] = (offh[j]+offl[j])/2; - dev->frontend.set_offset(j, off[j]); - } - - status = gl841_set_fe(dev, sensor, AFE_SET); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup frontend: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_info, "%s: starting first line reading\n", __func__); - RIE(gl841_begin_scan(dev, sensor, ®s, SANE_TRUE)); - - RIE(sanei_genesys_read_data_from_scanner (dev, first_line.data(), total_size)); - - if (DBG_LEVEL >= DBG_data) { - char fn[30]; - snprintf(fn, 30, "gl841_offset1_%02d.pnm", turn); - sanei_genesys_write_pnm_file(fn, first_line.data(), 16, channels, num_pixels, 1); - } - - acceptable = SANE_TRUE; - - for (j = 0; j < channels; j++) - { - cmin[j] = 0; - cmax[j] = 0; - - for (i = 0; i < num_pixels; i++) - { - if (dev->model->is_cis) - val = - first_line[i * 2 + j * 2 * num_pixels + 1] * 256 + - first_line[i * 2 + j * 2 * num_pixels]; - else - val = - first_line[i * 2 * channels + 2 * j + 1] * 256 + - first_line[i * 2 * channels + 2 * j]; - if (val < 10) - cmin[j]++; - if (val > 65525) - cmax[j]++; - } - - /* TODO the DP685 has a black strip in the middle of the sensor - * should be handled in a more elegant way , could be a bug */ - if (dev->model->ccd_type == CCD_DP685) - cmin[j] -= 20; - - if (cmin[j] > num_pixels/100) { - acceptable = SANE_FALSE; - if (dev->model->is_cis) - offl[0] = off[0]; - else - offl[j] = off[j]; - } - if (cmax[j] > num_pixels/100) { - acceptable = SANE_FALSE; - if (dev->model->is_cis) - offh[0] = off[0]; - else - offh[j] = off[j]; - } - } - - DBG(DBG_info,"%s: black/white pixels: %d/%d,%d/%d,%d/%d\n", __func__, cmin[0], cmax[0], - cmin[1], cmax[1], cmin[2], cmax[2]); - - if (dev->model->is_cis) { - offh[2] = offh[1] = offh[0]; - offl[2] = offl[1] = offl[0]; - } - - RIE(gl841_stop_action(dev)); - - turn++; - } while (!acceptable && turn < 100); - - DBG(DBG_info,"%s: acceptable offsets: %d,%d,%d\n", __func__, off[0], off[1], off[2]); - - - for (j = 0; j < channels; j++) - { - off1[j] = off[j]; - - min1[j] = 65536; - - for (i = 0; i < num_pixels; i++) - { - if (dev->model->is_cis) - val = - first_line[i * 2 + j * 2 * num_pixels + 1] * 256 + - first_line[i * 2 + j * 2 * num_pixels]; - else - val = - first_line[i * 2 * channels + 2 * j + 1] * 256 + - first_line[i * 2 * channels + 2 * j]; - if (min1[j] > val && val >= 10) - min1[j] = val; - } - } - - - offl[0] = off[0]; - offl[1] = off[0]; - offl[2] = off[0]; - turn = 0; - - do { - - for (j=0; j < channels; j++) { - off[j] = (offh[j]+offl[j])/2; - dev->frontend.set_offset(j, off[j]); - } - - status = gl841_set_fe(dev, sensor, AFE_SET); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup frontend: %s\n", __func__, sane_strstatus(status)); - return status; - } - - DBG(DBG_info, "%s: starting second line reading\n", __func__); - RIE(sanei_genesys_bulk_write_register(dev, regs)); - RIE(gl841_begin_scan(dev, sensor, ®s, SANE_TRUE)); - RIE(sanei_genesys_read_data_from_scanner (dev, second_line.data(), total_size)); - - if (DBG_LEVEL >= DBG_data) { - char fn[30]; - snprintf(fn, 30, "gl841_offset2_%02d.pnm", turn); - sanei_genesys_write_pnm_file(fn, second_line.data(), 16, channels, num_pixels, 1); - } - - acceptable = SANE_TRUE; - - for (j = 0; j < channels; j++) - { - cmin[j] = 0; - cmax[j] = 0; - - for (i = 0; i < num_pixels; i++) - { - if (dev->model->is_cis) - val = - second_line[i * 2 + j * 2 * num_pixels + 1] * 256 + - second_line[i * 2 + j * 2 * num_pixels]; - else - val = - second_line[i * 2 * channels + 2 * j + 1] * 256 + - second_line[i * 2 * channels + 2 * j]; - if (val < 10) - cmin[j]++; - if (val > 65525) - cmax[j]++; - } - - if (cmin[j] > num_pixels/100) { - acceptable = SANE_FALSE; - if (dev->model->is_cis) - offl[0] = off[0]; - else - offl[j] = off[j]; - } - if (cmax[j] > num_pixels/100) { - acceptable = SANE_FALSE; - if (dev->model->is_cis) - offh[0] = off[0]; - else - offh[j] = off[j]; - } - } - - DBG(DBG_info, "%s: black/white pixels: %d/%d,%d/%d,%d/%d\n", __func__, cmin[0], cmax[0], - cmin[1], cmax[1], cmin[2], cmax[2]); - - if (dev->model->is_cis) { - offh[2] = offh[1] = offh[0]; - offl[2] = offl[1] = offl[0]; - } - - RIE(gl841_stop_action (dev)); - - turn++; - - } while (!acceptable && turn < 100); - - DBG(DBG_info, "%s: acceptable offsets: %d,%d,%d\n", __func__, off[0], off[1], off[2]); - - - for (j = 0; j < channels; j++) - { - off2[j] = off[j]; - - min2[j] = 65536; - - for (i = 0; i < num_pixels; i++) - { - if (dev->model->is_cis) - val = - second_line[i * 2 + j * 2 * num_pixels + 1] * 256 + - second_line[i * 2 + j * 2 * num_pixels]; - else - val = - second_line[i * 2 * channels + 2 * j + 1] * 256 + - second_line[i * 2 * channels + 2 * j]; - if (min2[j] > val && val != 0) - min2[j] = val; - } - } - - DBG(DBG_info, "%s: first set: %d/%d,%d/%d,%d/%d\n", __func__, off1[0], min1[0], off1[1], min1[1], - off1[2], min1[2]); - - DBG(DBG_info, "%s: second set: %d/%d,%d/%d,%d/%d\n", __func__, off2[0], min2[0], off2[1], min2[1], - off2[2], min2[2]); - -/* - calculate offset for each channel - based on minimal pixel value min1 at offset off1 and minimal pixel value min2 - at offset off2 - - to get min at off, values are linearly interpolated: - min=real+off*fact - min1=real+off1*fact - min2=real+off2*fact - - fact=(min1-min2)/(off1-off2) - real=min1-off1*(min1-min2)/(off1-off2) - - off=(min-min1+off1*(min1-min2)/(off1-off2))/((min1-min2)/(off1-off2)) - - off=(min*(off1-off2)+min1*off2-off1*min2)/(min1-min2) - - */ - for (j = 0; j < channels; j++) - { - if (min2[j]-min1[j] == 0) { -/*TODO: try to avoid this*/ - DBG(DBG_warn, "%s: difference too small\n", __func__); - if (mintgt * (off1[j] - off2[j]) + min1[j] * off2[j] - min2[j] * off1[j] >= 0) - off[j] = 0x0000; - else - off[j] = 0xffff; - } else - off[j] = (mintgt * (off1[j] - off2[j]) + min1[j] * off2[j] - min2[j] * off1[j])/(min1[j]-min2[j]); - if (off[j] > 255) - off[j] = 255; - if (off[j] < 0) - off[j] = 0; - dev->frontend.set_offset(j, off[j]); - } - - DBG(DBG_info, "%s: final offsets: %d,%d,%d\n", __func__, off[0], off[1], off[2]); - - if (dev->model->is_cis) { - if (off[0] < off[1]) - off[0] = off[1]; - if (off[0] < off[2]) - off[0] = off[2]; - dev->frontend.set_offset(0, off[0]); - dev->frontend.set_offset(1, off[0]); - dev->frontend.set_offset(2, off[0]); - } - - if (channels == 1) - { - dev->frontend.set_offset(1, dev->frontend.get_offset(0)); - dev->frontend.set_offset(2, dev->frontend.get_offset(0)); - } - - DBG(DBG_proc, "%s: completed\n", __func__); - return status; -} - - -/* alternative coarse gain calibration - this on uses the settings from offset_calibration and - uses only one scanline - */ -/* - with offset and coarse calibration we only want to get our input range into - a reasonable shape. the fine calibration of the upper and lower bounds will - be done with shading. - */ -static SANE_Status -gl841_coarse_gain_calibration(Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Register_Set& regs, int dpi) -{ - int num_pixels; - int total_size; - int i, j, channels; - SANE_Status status = SANE_STATUS_GOOD; - int max[3]; - float gain[3]; - int val; - int lines=1; - int move; - - DBG(DBG_proc, "%s: dpi=%d\n", __func__, dpi); - - /* feed to white strip if needed */ - if (dev->model->y_offset_calib>0) - { - move = SANE_UNFIX (dev->model->y_offset_calib); - move = (move * (dev->motor.base_ydpi)) / MM_PER_INCH; - DBG(DBG_io, "%s: move=%d lines\n", __func__, move); - status = gl841_feed(dev, move); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to feed: %s\n", __func__, sane_strstatus(status)); - return status; - } - } - - /* coarse gain calibration is allways done in color mode */ - channels = 3; - - SetupParams params; - params.xres = dev->settings.xres; - params.yres = dev->settings.yres; - params.startx = 0; - params.starty = 0; - params.pixels = (sensor.sensor_pixels*dev->settings.xres) / sensor.optical_res; - params.lines = lines; - params.depth = 16; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_USE_OPTICAL_RES; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - RIE(sanei_genesys_bulk_write_register(dev, regs)); - - num_pixels = dev->current_setup.pixels; - - total_size = num_pixels * channels * 2 * lines; /* colors * bytes_per_color * scan lines */ - - std::vector line(total_size); - - RIE(gl841_begin_scan(dev, sensor, ®s, SANE_TRUE)); - RIE(sanei_genesys_read_data_from_scanner(dev, line.data(), total_size)); - - if (DBG_LEVEL >= DBG_data) - sanei_genesys_write_pnm_file("gl841_gain.pnm", line.data(), 16, channels, num_pixels, lines); - - /* average high level for each channel and compute gain - to reach the target code - we only use the central half of the CCD data */ - for (j = 0; j < channels; j++) - { - max[j] = 0; - for (i = 0; i < num_pixels; i++) - { - if (dev->model->is_cis) - val = - line[i * 2 + j * 2 * num_pixels + 1] * 256 + - line[i * 2 + j * 2 * num_pixels]; - else - val = - line[i * 2 * channels + 2 * j + 1] * 256 + - line[i * 2 * channels + 2 * j]; - - if (val > max[j]) - max[j] = val; - } - - gain[j] = 65535.0/max[j]; - - uint8_t out_gain = 0; - - if (dev->model->dac_type == DAC_CANONLIDE35 || - dev->model->dac_type == DAC_WOLFSON_XP300 || - dev->model->dac_type == DAC_WOLFSON_DSM600) - { - gain[j] *= 0.69;/*seems we don't get the real maximum. empirically derived*/ - if (283 - 208/gain[j] > 255) - out_gain = 255; - else if (283 - 208/gain[j] < 0) - out_gain = 0; - else - out_gain = 283 - 208/gain[j]; - } - else if (dev->model->dac_type == DAC_CANONLIDE80) - { - out_gain = gain[j]*12; - } - dev->frontend.set_gain(j, out_gain); - - DBG(DBG_proc, "%s: channel %d, max=%d, gain = %f, setting:%d\n", __func__, j, max[j], gain[j], - out_gain); - } - - for (j = 0; j < channels; j++) - { - if(gain[j] > 10) - { - DBG (DBG_error0, "**********************************************\n"); - DBG (DBG_error0, "**********************************************\n"); - DBG (DBG_error0, "**** ****\n"); - DBG (DBG_error0, "**** Extremely low Brightness detected. ****\n"); - DBG (DBG_error0, "**** Check the scanning head is ****\n"); - DBG (DBG_error0, "**** unlocked and moving. ****\n"); - DBG (DBG_error0, "**** ****\n"); - DBG (DBG_error0, "**********************************************\n"); - DBG (DBG_error0, "**********************************************\n"); - return SANE_STATUS_JAMMED; - } - - } - - if (dev->model->is_cis) { - uint8_t gain0 = dev->frontend.get_gain(0); - if (gain0 > dev->frontend.get_gain(1)) { - gain0 = dev->frontend.get_gain(1); - } - if (gain0 > dev->frontend.get_gain(2)) { - gain0 = dev->frontend.get_gain(2); - } - dev->frontend.set_gain(0, gain0); - dev->frontend.set_gain(1, gain0); - dev->frontend.set_gain(2, gain0); - } - - if (channels == 1) { - dev->frontend.set_gain(0, dev->frontend.get_gain(1)); - dev->frontend.set_gain(2, dev->frontend.get_gain(1)); - } - - DBG(DBG_info, "%s: gain=(%d,%d,%d)\n", __func__, - dev->frontend.get_gain(0), - dev->frontend.get_gain(1), - dev->frontend.get_gain(2)); - - RIE (gl841_stop_action (dev)); - - gl841_slow_back_home(dev, SANE_TRUE); - - DBGCOMPLETED; - return status; -} - -/* - * wait for lamp warmup by scanning the same line until difference - * between 2 scans is below a threshold - */ -static SANE_Status -gl841_init_regs_for_warmup (Genesys_Device * dev, - const Genesys_Sensor& sensor, - Genesys_Register_Set * local_reg, - int *channels, int *total_size) -{ - int num_pixels = (int) (4 * 300); - SANE_Status status = SANE_STATUS_GOOD; - - DBG(DBG_proc, "%s\n", __func__); - - *local_reg = dev->reg; - -/* okay.. these should be defaults stored somewhere */ - dev->frontend.set_gain(0, 0); - dev->frontend.set_gain(1, 0); - dev->frontend.set_gain(2, 0); - dev->frontend.set_offset(0, 0x80); - dev->frontend.set_offset(1, 0x80); - dev->frontend.set_offset(2, 0x80); - - SetupParams params; - params.xres = sensor.optical_res; - params.yres = dev->settings.yres; - params.startx = sensor.dummy_pixel; - params.starty = 0; - params.pixels = num_pixels; - params.lines = 1; - params.depth = 16; - params.channels = *channels; - params.scan_method = dev->settings.scan_method; - if (*channels == 3) { - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - } else { - params.scan_mode = ScanColorMode::GRAY; - } - params.color_filter = dev->settings.color_filter; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_USE_OPTICAL_RES; - - status = gl841_init_scan_regs(dev, sensor, local_reg, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - num_pixels = dev->current_setup.pixels; - - *total_size = num_pixels * 3 * 2 * 1; /* colors * bytes_per_color * scan lines */ - - RIE(sanei_genesys_bulk_write_register(dev, *local_reg)); - - return status; -} - - -/* - * this function moves head without scanning, forward, then backward - * so that the head goes to park position. - * as a by-product, also check for lock - */ -static SANE_Status -sanei_gl841_repark_head (Genesys_Device * dev) -{ - SANE_Status status = SANE_STATUS_GOOD; - - DBG(DBG_proc, "%s\n", __func__); - - status = gl841_feed(dev,232); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to feed: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* toggle motor flag, put an huge step number and redo move backward */ - status = gl841_slow_back_home (dev, SANE_TRUE); - DBG(DBG_proc, "%s: completed\n", __func__); - return status; -} - -static bool -gl841_is_compatible_calibration (Genesys_Device * dev, const Genesys_Sensor& sensor, - Genesys_Calibration_Cache *cache, - int for_overwrite) -{ -#ifdef HAVE_SYS_TIME_H - struct timeval time; -#endif - - DBGSTART; - - /* calibration cache not working yet for this model */ - if (dev->model->ccd_type == CCD_PLUSTEK_3600) - { - return false; - } - - gl841_calculate_current_setup (dev, sensor); - - DBG(DBG_proc, "%s: checking\n", __func__); - - if (dev->current_setup.ccd_size_divisor != cache->used_setup.ccd_size_divisor) - return false; - - /* a cache entry expires after 30 minutes for non sheetfed scanners */ - /* this is not taken into account when overwriting cache entries */ -#ifdef HAVE_SYS_TIME_H - if(for_overwrite == SANE_FALSE) - { - gettimeofday (&time, NULL); - if ((time.tv_sec - cache->last_calibration > 30 * 60) - && (dev->model->is_sheetfed == SANE_FALSE)) - { - DBG(DBG_proc, "%s: expired entry, non compatible cache\n", __func__); - return false; - } - } -#endif - - DBGCOMPLETED; - return true; -} - -/* - * initialize ASIC : registers, motor tables, and gamma tables - * then ensure scanner's head is at home - */ -static SANE_Status -gl841_init (Genesys_Device * dev) -{ - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val; - size_t size; - - DBG_INIT (); - DBGSTART; - - dev->scanhead_position_in_steps = 0; - - /* Check if the device has already been initialized and powered up */ - if (dev->already_initialized) - { - RIE (sanei_genesys_get_status (dev, &val)); - if (val & REG41_PWRBIT) - { - DBG(DBG_info, "%s: already initialized\n", __func__); - DBGCOMPLETED; - return SANE_STATUS_GOOD; - } - } - - dev->dark_average_data.clear(); - dev->white_average_data.clear(); - - dev->settings.color_filter = ColorFilter::RED; - - /* ASIC reset */ - RIE (sanei_genesys_write_register (dev, 0x0e, 0x01)); - RIE (sanei_genesys_write_register (dev, 0x0e, 0x00)); - - /* Set default values for registers */ - gl841_init_registers (dev); - - /* Write initial registers */ - RIE(sanei_genesys_bulk_write_register(dev, dev->reg)); - - /* Test ASIC and RAM */ - if (!(dev->model->flags & GENESYS_FLAG_LAZY_INIT)) - { - RIE (sanei_gl841_asic_test (dev)); - } - - const auto& sensor = sanei_genesys_find_sensor_any(dev); - - /* Set analog frontend */ - RIE (gl841_set_fe(dev, sensor, AFE_INIT)); - - /* Move home */ - RIE (gl841_slow_back_home (dev, SANE_TRUE)); - - /* Init shading data */ - RIE (sanei_genesys_init_shading_data(dev, sensor, sensor.sensor_pixels)); - - /* ensure head is correctly parked, and check lock */ - if (dev->model->flags & GENESYS_FLAG_REPARK) - { - status = sanei_gl841_repark_head (dev); - if (status != SANE_STATUS_GOOD) - { - if (status == SANE_STATUS_INVAL) - DBG(DBG_error0, "Your scanner is locked. Please move the lock switch to the unlocked " - "position\n"); - else - DBG(DBG_error, "%s: sanei_gl841_repark_head failed: %s\n", __func__, - sane_strstatus(status)); - return status; - } - } - - /* send gamma tables */ - status = gl841_send_gamma_table(dev, sensor); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to send initial gamma tables: %s\n", __func__, - sane_strstatus(status)); - return status; - } - - /* initial calibration reg values */ - Genesys_Register_Set& regs = dev->calib_reg; - regs = dev->reg; - - SetupParams params; - params.xres = 300; - params.yres = 300; - params.startx = 0; - params.starty = 0; - params.pixels = (16 * 300) / sensor.optical_res; - params.lines = 1; - params.depth = 16; - params.channels = 3; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS; - params.color_filter = ColorFilter::RED; - params.flags = SCAN_FLAG_DISABLE_SHADING | - SCAN_FLAG_DISABLE_GAMMA | - SCAN_FLAG_SINGLE_LINE | - SCAN_FLAG_IGNORE_LINE_DISTANCE | - SCAN_FLAG_USE_OPTICAL_RES; - - status = gl841_init_scan_regs(dev, sensor, ®s, params); - - RIE(sanei_genesys_bulk_write_register(dev, regs)); - - size = dev->current_setup.pixels * 3 * 2 * 1; /* colors * bytes_per_color * scan lines */ - - std::vector line(size); - - DBG(DBG_info, "%s: starting dummy data reading\n", __func__); - RIE(gl841_begin_scan(dev, sensor, ®s, SANE_TRUE)); - - sanei_usb_set_timeout(1000);/* 1 second*/ - -/*ignore errors. next read will succeed*/ - sanei_genesys_read_data_from_scanner(dev, line.data(), size); - - sanei_usb_set_timeout(30 * 1000);/* 30 seconds*/ - - RIE (gl841_end_scan(dev, ®s, SANE_TRUE)); - - regs = dev->reg; - - /* Set powersaving (default = 15 minutes) */ - RIE (gl841_set_powersaving (dev, 15)); - dev->already_initialized = SANE_TRUE; - - DBGCOMPLETED; - return SANE_STATUS_GOOD; -} - -static SANE_Status -gl841_update_hardware_sensors (Genesys_Scanner * s) -{ - /* do what is needed to get a new set of events, but try to not lose - any of them. - */ - SANE_Status status = SANE_STATUS_GOOD; - uint8_t val; - - if (s->dev->model->gpo_type == GPO_CANONLIDE35 - || s->dev->model->gpo_type == GPO_CANONLIDE80) - { - RIE(sanei_genesys_read_register(s->dev, REG6D, &val)); - s->buttons[BUTTON_SCAN_SW].write((val & 0x01) == 0); - s->buttons[BUTTON_FILE_SW].write((val & 0x02) == 0); - s->buttons[BUTTON_EMAIL_SW].write((val & 0x04) == 0); - s->buttons[BUTTON_COPY_SW].write((val & 0x08) == 0); - } - - if (s->dev->model->gpo_type == GPO_XP300 || - s->dev->model->gpo_type == GPO_DP665 || - s->dev->model->gpo_type == GPO_DP685) - { - RIE(sanei_genesys_read_register(s->dev, REG6D, &val)); - - s->buttons[BUTTON_PAGE_LOADED_SW].write((val & 0x01) == 0); - s->buttons[BUTTON_SCAN_SW].write((val & 0x02) == 0); - } - - return status; -} - -/** @brief search for a full width black or white strip. - * This function searches for a black or white stripe across the scanning area. - * When searching backward, the searched area must completely be of the desired - * color since this area will be used for calibration which scans forward. - * @param dev scanner device - * @param forward SANE_TRUE if searching forward, SANE_FALSE if searching backward - * @param black SANE_TRUE if searching for a black strip, SANE_FALSE for a white strip - * @return SANE_STATUS_GOOD if a matching strip is found, SANE_STATUS_UNSUPPORTED if not - */ -static SANE_Status -gl841_search_strip(Genesys_Device * dev, const Genesys_Sensor& sensor, - SANE_Bool forward, SANE_Bool black) -{ - unsigned int pixels, lines, channels; - SANE_Status status = SANE_STATUS_GOOD; - Genesys_Register_Set local_reg; - size_t size; - int steps, depth, dpi; - unsigned int pass, count, found, x, y, length; - char title[80]; - GenesysRegister *r; - uint8_t white_level=90; /**< default white level to detect white dots */ - uint8_t black_level=60; /**< default black level to detect black dots */ - - DBG(DBG_proc, "%s %s %s\n", __func__, black ? "black" : "white", forward ? "forward" : "reverse"); - - /* use maximum gain when doing forward white strip detection - * since we don't have calibrated the sensor yet */ - if(!black && forward) - { - dev->frontend.set_gain(0, 0xff); - dev->frontend.set_gain(1, 0xff); - dev->frontend.set_gain(2, 0xff); - } - - gl841_set_fe(dev, sensor, AFE_SET); - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to stop: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* set up for a gray scan at lowest dpi */ - dpi = 9600; - for (x = 0; x < MAX_RESOLUTIONS; x++) - { - if (dev->model->xdpi_values[x] > 0 && dev->model->xdpi_values[x] < dpi) - dpi = dev->model->xdpi_values[x]; - } - channels = 1; - - /* shading calibation is done with dev->motor.base_ydpi */ - /* lines = (dev->model->shading_lines * dpi) / dev->motor.base_ydpi; */ - lines = (10*dpi)/MM_PER_INCH; - - depth = 8; - pixels = (sensor.sensor_pixels * dpi) / sensor.optical_res; - size = pixels * channels * lines * (depth / 8); - std::vector data(size); - - /* 20 cm max length for calibration sheet */ - length = ((200 * dpi) / MM_PER_INCH)/lines; - - dev->scanhead_position_in_steps = 0; - - local_reg = dev->reg; - - SetupParams params; - params.xres = dpi; - params.yres = dpi; - params.startx = 0; - params.starty = 0; - params.pixels = pixels; - params.lines = lines; - params.depth = depth; - params.channels = channels; - params.scan_method = dev->settings.scan_method; - params.scan_mode = ScanColorMode::GRAY; - params.color_filter = ColorFilter::RED; - params.flags = SCAN_FLAG_DISABLE_SHADING | SCAN_FLAG_DISABLE_GAMMA; - - status = gl841_init_scan_regs(dev, sensor, &local_reg, params); - - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to setup for scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* set up for reverse or forward */ - r = sanei_genesys_get_address(&local_reg, 0x02); - if (forward) - r->value &= ~4; - else - r->value |= 4; - - - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = gl841_begin_scan(dev, sensor, &local_reg, SANE_TRUE); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to begin scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* waits for valid data */ - do - sanei_genesys_test_buffer_empty (dev, &steps); - while (steps); - - /* now we're on target, we can read data */ - status = sanei_genesys_read_data_from_scanner(dev, data.data(), size); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to read data: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: gl841_stop_action failed\n", __func__); - return status; - } - - pass = 0; - if (DBG_LEVEL >= DBG_data) - { - sprintf(title, "gl841_search_strip_%s_%s%02u.pnm", black ? "black" : "white", - forward ? "fwd" : "bwd", pass); - sanei_genesys_write_pnm_file(title, data.data(), depth, channels, pixels, lines); - } - - /* loop until strip is found or maximum pass number done */ - found = 0; - while (pass < length && !found) - { - status = sanei_genesys_bulk_write_register(dev, local_reg); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to bulk write registers: %s\n", __func__, - sane_strstatus(status)); - return status; - } - - /* now start scan */ - status = gl841_begin_scan(dev, sensor, &local_reg, SANE_TRUE); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error,"%s: failed to begin scan: %s\n", __func__, sane_strstatus(status)); - return status; - } - - /* waits for valid data */ - do - sanei_genesys_test_buffer_empty (dev, &steps); - while (steps); - - /* now we're on target, we can read data */ - status = sanei_genesys_read_data_from_scanner (dev, data.data(), size); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "g%s: failed to read data: %s\n", __func__, sane_strstatus(status)); - return status; - } - - status = gl841_stop_action (dev); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: gl841_stop_action failed\n", __func__); - return status; - } - - if (DBG_LEVEL >= DBG_data) - { - sprintf(title, "gl841_search_strip_%s_%s%02u.pnm", - black ? "black" : "white", forward ? "fwd" : "bwd", pass); - sanei_genesys_write_pnm_file(title, data.data(), depth, channels, pixels, lines); - } - - /* search data to find black strip */ - /* when searching forward, we only need one line of the searched color since we - * will scan forward. But when doing backward search, we need all the area of the - * same color */ - if (forward) - { - for (y = 0; y < lines && !found; y++) - { - count = 0; - /* count of white/black pixels depending on the color searched */ - for (x = 0; x < pixels; x++) - { - /* when searching for black, detect white pixels */ - if (black && data[y * pixels + x] > white_level) - { - count++; - } - /* when searching for white, detect black pixels */ - if (!black && data[y * pixels + x] < black_level) - { - count++; - } - } - - /* at end of line, if count >= 3%, line is not fully of the desired color - * so we must go to next line of the buffer */ - /* count*100/pixels < 3 */ - if ((count * 100) / pixels < 3) - { - found = 1; - DBG(DBG_data, "%s: strip found forward during pass %d at line %d\n", __func__, - pass, y); - } - else - { - DBG(DBG_data, "%s: pixels=%d, count=%d (%d%%)\n", __func__, pixels, count, - (100 * count) / pixels); - } - } - } - else /* since calibration scans are done forward, we need the whole area - to be of the required color when searching backward */ - { - count = 0; - for (y = 0; y < lines; y++) - { - /* count of white/black pixels depending on the color searched */ - for (x = 0; x < pixels; x++) - { - /* when searching for black, detect white pixels */ - if (black && data[y * pixels + x] > white_level) - { - count++; - } - /* when searching for white, detect black pixels */ - if (!black && data[y * pixels + x] < black_level) - { - count++; - } - } - } - - /* at end of area, if count >= 3%, area is not fully of the desired color - * so we must go to next buffer */ - if ((count * 100) / (pixels * lines) < 3) - { - found = 1; - DBG(DBG_data, "%s: strip found backward during pass %d \n", __func__, pass); - } - else - { - DBG(DBG_data, "%s: pixels=%d, count=%d (%d%%)\n", __func__, pixels, count, - (100 * count) / pixels); - } - } - pass++; - } - - if (found) - { - status = SANE_STATUS_GOOD; - DBG(DBG_info, "%s: %s strip found\n", __func__, black ? "black" : "white"); - } - else - { - status = SANE_STATUS_UNSUPPORTED; - DBG(DBG_info, "%s: %s strip not found\n", __func__, black ? "black" : "white"); - } - - DBG(DBG_proc, "%s: completed\n", __func__); - return status; -} - -/** - * Send shading calibration data. The buffer is considered to always hold values - * for all the channels. - */ -static -SANE_Status -gl841_send_shading_data (Genesys_Device * dev, const Genesys_Sensor& sensor, - uint8_t * data, int size) -{ - SANE_Status status = SANE_STATUS_GOOD; - uint32_t length, x, factor, pixels, i; - uint32_t lines, channels; - uint16_t dpiset, dpihw, strpixel ,endpixel, beginpixel; - uint8_t *ptr,*src; - - DBGSTART; - DBG(DBG_io2, "%s: writing %d bytes of shading data\n", __func__, size); - - /* old method if no SHDAREA */ - if((dev->reg.find_reg(0x01).value & REG01_SHDAREA) == 0) - { - /* start address */ - status = sanei_genesys_set_buffer_address (dev, 0x0000); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to set buffer address: %s\n", __func__, - sane_strstatus(status)); - return status; - } - - /* shading data whole line */ - status = dev->model->cmd_set->bulk_write_data (dev, 0x3c, data, size); - if (status != SANE_STATUS_GOOD) - { - DBG(DBG_error, "%s: failed to send shading table: %s\n", __func__, - sane_strstatus(status)); - return status; - } - DBGCOMPLETED; - return status; - } - - /* data is whole line, we extract only the part for the scanned area */ - length = (uint32_t) (size / 3); - sanei_genesys_get_double(&dev->reg,REG_STRPIXEL,&strpixel); - sanei_genesys_get_double(&dev->reg,REG_ENDPIXEL,&endpixel); - DBG(DBG_io2, "%s: STRPIXEL=%d, ENDPIXEL=%d, PIXELS=%d\n", __func__, strpixel, endpixel, - endpixel-strpixel); - - /* compute deletion/average factor */ - sanei_genesys_get_double(&dev->reg,REG_DPISET,&dpiset); - dpihw = gl841_get_dpihw(dev); - unsigned ccd_size_divisor = dev->current_setup.ccd_size_divisor; - factor=dpihw/dpiset; - DBG(DBG_io2, "%s: dpihw=%d, dpiset=%d, ccd_size_divisor=%d, factor=%d\n", __func__, dpihw, dpiset, - ccd_size_divisor, factor); - - /* binary data logging */ - if(DBG_LEVEL>=DBG_data) - { - dev->binary=fopen("binary.pnm","wb"); - sanei_genesys_get_triple(&dev->reg, REG_LINCNT, &lines); - channels=dev->current_setup.channels; - if(dev->binary!=NULL) - { - fprintf(dev->binary,"P5\n%d %d\n%d\n",(endpixel-strpixel)/factor*channels,lines/channels,255); - } - } - - /* turn pixel value into bytes 2x16 bits words */ - strpixel*=2*2; /* 2 words of 2 bytes */ - endpixel*=2*2; - pixels=endpixel-strpixel; - - /* shading pixel begin is start pixel minus start pixel during shading - * calibration. Currently only cases handled are full and half ccd resolution. - */ - beginpixel = sensor.CCD_start_xoffset / ccd_size_divisor; - beginpixel += sensor.dummy_pixel + 1; - DBG(DBG_io2, "%s: ORIGIN PIXEL=%d\n", __func__, beginpixel); - beginpixel = (strpixel-beginpixel*2*2)/factor; - DBG(DBG_io2, "%s: BEGIN PIXEL=%d\n", __func__, beginpixel/4); - - DBG(DBG_io2, "%s: using chunks of %d bytes (%d shading data pixels)\n", __func__, length, - length/4); - std::vector buffer(pixels, 0); - - /* write actual shading data contigously - * channel by channel, starting at addr 0x0000 - * */ - for(i=0;i<3;i++) - { - /* copy data to work buffer and process it */ - /* coefficent destination */ - ptr=buffer.data(); - - /* iterate on both sensor segment, data has been averaged, - * so is in the right order and we only have to copy it */ - for(x=0;xmodel->cmd_set->bulk_write_data(dev, 0x3c, buffer.data(), pixels)); - } - - DBGCOMPLETED; - - return status; -} - - -/** the gl841 command set */ -static Genesys_Command_Set gl841_cmd_set = { - "gl841-generic", /* the name of this set */ - - [](Genesys_Device* dev) -> bool { (void) dev; return true; }, - - gl841_init, - gl841_init_regs_for_warmup, - gl841_init_regs_for_coarse_calibration, - gl841_init_regs_for_shading, - gl841_init_regs_for_scan, - - gl841_get_filter_bit, - gl841_get_lineart_bit, - gl841_get_bitset_bit, - gl841_get_gain4_bit, - gl841_get_fast_feed_bit, - gl841_test_buffer_empty_bit, - gl841_test_motor_flag_bit, - - gl841_set_fe, - gl841_set_powersaving, - gl841_save_power, - - gl841_begin_scan, - gl841_end_scan, - - gl841_send_gamma_table, - - gl841_search_start_position, - - gl841_offset_calibration, - gl841_coarse_gain_calibration, - gl841_led_calibration, - - NULL, - gl841_slow_back_home, - NULL, - - sanei_genesys_bulk_write_register, - sanei_genesys_bulk_write_data, - sanei_genesys_bulk_read_data, - - gl841_update_hardware_sensors, - - gl841_load_document, - gl841_detect_document_end, - gl841_eject_document, - gl841_search_strip, - - gl841_is_compatible_calibration, - NULL, - gl841_send_shading_data, - gl841_calculate_current_setup, - NULL -}; - -SANE_Status -sanei_gl841_init_cmd_set (Genesys_Device * dev) -{ - dev->model->cmd_set = &gl841_cmd_set; - return SANE_STATUS_GOOD; -} -- cgit v1.2.3