From ffa8801644a7d53cc1c785e3450f794c07a14eb0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= <debian@jff-webhosting.net>
Date: Sun, 2 Feb 2020 17:13:01 +0100
Subject: New upstream version 1.0.29

---
 backend/mustek_pp.c | 40 ----------------------------------------
 1 file changed, 40 deletions(-)

(limited to 'backend/mustek_pp.c')

diff --git a/backend/mustek_pp.c b/backend/mustek_pp.c
index 912c3bd..bb97f86 100644
--- a/backend/mustek_pp.c
+++ b/backend/mustek_pp.c
@@ -160,8 +160,6 @@ free_cfg_options(int *numoptions, Mustek_pp_config_option** options)
 /* do_eof:
  * 	closes the pipeline
  *
- * ChangeLog:
- *
  * Description:
  * 	closes the pipe (read-only end)
  */
@@ -180,8 +178,6 @@ do_eof (Mustek_pp_Handle *hndl)
 /* do_stop:
  * 	ends the reader_process and stops the scanner
  *
- * ChangeLog:
- *
  * Description:
  * 	kills the reader process with a SIGTERM and cancels the scanner
  */
@@ -218,8 +214,6 @@ do_stop(Mustek_pp_Handle *hndl)
 /* sigterm_handler:
  * 	cancel scanner when receiving a SIGTERM
  *
- * ChangeLog:
- *
  * Description:
  *	just exit... reader_process takes care that nothing bad will happen
  *
@@ -247,8 +241,6 @@ sigterm_handler (int signal __UNUSED__)
 /* reader_process:
  * 	receives data from the scanner and stuff it into the pipeline
  *
- * ChangeLog:
- *
  * Description:
  * 	The signal handle for SIGTERM is initialized.
  *
@@ -318,8 +310,6 @@ reader_process (Mustek_pp_Handle * hndl, int pipe)
 /* sane_attach:
  * 	adds a new entry to the Mustek_pp_Device *devlist list
  *
- * ChangeLog:
- *
  * Description:
  * 	After memory for a new device entry is allocated, the
  * 	parameters for the device are determined by a call to
@@ -382,8 +372,6 @@ sane_attach (SANE_String_Const port, SANE_String_Const name, SANE_Int driver, SA
 /* init_options:
  * 	Sets up the option descriptors for a device
  *
- * ChangeLog:
- *
  * Description:
  */
 static void
@@ -626,8 +614,6 @@ init_options(Mustek_pp_Handle *hndl)
  * 	Attempts to attach a device to the list after parsing of a section
  *      of the configuration file.
  *
- * ChangeLog:
- *
  * Description:
  *      After parsing a scanner section of the config file, this function
  *      is called to look for a driver with a matching name. When found,
@@ -691,8 +677,6 @@ attach_device(SANE_String *driver, SANE_String *name,
 /* sane_init:
  *	Reads configuration file and registers hardware driver
  *
- * ChangeLog:
- *
  * Description:
  * 	in *version_code the SANE version this backend was compiled with and the
  * 	version of the backend is returned. The value of authorize is stored in
@@ -1001,8 +985,6 @@ sane_init (SANE_Int * version_code, SANE_Auth_Callback authorize)
 /* sane_exit:
  *	Unloads all drivers and frees allocated memory
  *
- * ChangeLog:
- *
  * Description:
  * 	All open devices are closed first. Then all registered devices
  * 	are removed.
@@ -1051,8 +1033,6 @@ sane_exit (void)
 /* sane_get_devices:
  * 	Returns a list of registered devices
  *
- * ChangeLog:
- *
  * Description:
  * 	A possible present old device_list is removed first. A new
  * 	devarray is allocated and filled with pointers to the
@@ -1093,8 +1073,6 @@ sane_get_devices (const SANE_Device *** device_list,
 /* sane_open:
  * 	opens a device and prepares it for operation
  *
- * ChangeLog:
- *
  * Description:
  * 	The device identified by ``devicename'' is looked
  * 	up in the list, or if devicename is zero, the
@@ -1201,8 +1179,6 @@ sane_open (SANE_String_Const devicename, SANE_Handle * handle)
 /* sane_close:
  * 	closes a given device and frees all resources
  *
- * ChangeLog:
- *
  * Description:
  * 	The handle is searched in the list of active handles.
  * 	If it's found, the handle is removed.
@@ -1261,8 +1237,6 @@ sane_close (SANE_Handle handle)
 /* sane_get_option_descriptor:
  * 	does what it says
  *
- * ChangeLog:
- *
  * Description:
  *
  */
@@ -1285,8 +1259,6 @@ sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
 /* sane_control_option:
  * 	Reads or writes an option
  *
- * ChangeLog:
- *
  * Desription:
  * 	If a pointer to info is given, the value is initialized to zero
  *	while scanning options cannot be read or written. next a basic
@@ -1523,8 +1495,6 @@ sane_control_option (SANE_Handle handle, SANE_Int option,
 /* sane_get_parameters:
  * 	returns the set of parameters, that is used for the next scan
  *
- * ChangeLog:
- *
  * Description:
  *
  * 	First of all it is impossible to change the parameter set
@@ -1716,8 +1686,6 @@ sane_get_parameters (SANE_Handle handle, SANE_Parameters * params)
 /* sane_start:
  * 	starts the scan. data aquisition will start immedially
  *
- * ChangeLog:
- *
  * Description:
  *
  */
@@ -1775,8 +1743,6 @@ sane_start (SANE_Handle handle)
 /* sane_read:
  * 	receives data from pipeline and passes it to the caller
  *
- * ChangeLog:
- *
  * Description:
  * 	ditto
  */
@@ -1877,8 +1843,6 @@ sane_read (SANE_Handle handle, SANE_Byte * buf, SANE_Int max_len,
 /* sane_cancel:
  * 	stops a scan and ends the reader process
  *
- * ChangeLog:
- *
  * Description:
  *
  */
@@ -1900,8 +1864,6 @@ sane_cancel (SANE_Handle handle)
 /* sane_set_io_mode:
  * 	toggles between blocking and non-blocking reading
  *
- * ChangeLog:
- *
  * Description:
  *
  */
@@ -1930,8 +1892,6 @@ sane_set_io_mode (SANE_Handle handle, SANE_Bool non_blocking)
 /* sane_get_select_fd:
  * 	returns the pipeline fd for direct reading
  *
- * ChangeLog:
- *
  * Description:
  * 	to allow the frontend to receive the data directly it
  * 	can read from the pipeline itself
-- 
cgit v1.2.3