From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/descriptions/gt68xx.desc | 472 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 472 insertions(+) create mode 100644 doc/descriptions/gt68xx.desc (limited to 'doc/descriptions/gt68xx.desc') diff --git a/doc/descriptions/gt68xx.desc b/doc/descriptions/gt68xx.desc new file mode 100644 index 0000000..5bc8f0e --- /dev/null +++ b/doc/descriptions/gt68xx.desc @@ -0,0 +1,472 @@ +:backend "gt68xx" +:version "1.0-84" +:manpage "sane-gt68xx" +:url "http://www.meier-geinitz.de/sane/gt68xx-backend/" +:comment "Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek and the MA-1509 backend." +:devicetype :scanner + +; ----------------------------------------------------------------------------- + +:mfg "Artec/Ultima" +:url "http://www.artecusa.com/" + +:model "Ultima 2000" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Works, only product id 0x4002 is supported" + +:model "Ultima 2000 e+" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Works, however 12 bit mode doesn't seem to be supported" + +; ----------------------------------------------------------------------------- + +:mfg "Boeder" +:model "Sm@rtScan Slim Edition" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Similar to Artec Ultima 2000" + +; ----------------------------------------------------------------------------- + +:mfg "Fujitsu" +:url "http://www.fujitsu.com/" + +:model "1200CUS" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :basic +:comment "Works, but is slow. Probably a Mustek BearPaw 2400 CU clone." + +; ----------------------------------------------------------------------------- + +:mfg "Genius" +:url "http://www.genius-kye.com/" + +:model "ColorPage Slim 1200" +;:url "/unsupported/genius-colorpage-slim-1200.html" +:interface "USB" +:usbid "0x0458" "0x201e" +:status :untested +:comment "Untested but should work." + +:model "Colorpage SF600" +:interface "USB" +:usbid "0x0458" "0x2021" +:status :basic + +:model "Colorpage Vivid3x" +:interface "USB" +:usbid "0x0458" "0x2011" +:status :good + +:model "Colorpage Vivid3 V2" +:interface "USB" +:usbid "0x0458" "0x2011" +:status :good +:comment "Same as Colorpage Vivid3x" + +:model "Colorpage Vivid3xe" +:interface "USB" +:usbid "0x0458" "0x2017" +:status :good + +:model "Colorpage Vivid4" +:usbid "0x0458" "0x2014" +:interface "USB" +:status :good + +:model "Colorpage Vivid4x" +:usbid "0x0458" "0x201b" +:interface "USB" +:status :good + +:model "Colorpage Vivid4xe" +:usbid "0x0458" "0x201a" +:interface "USB" +:status :good + +:model "Colorpage Vivid 1200 X" +:interface "USB" +:usbid "0x0458" "0x201d" +:status :good + +:model "Colorpage Vivid 1200 XE" +:interface "USB" +:usbid "0x0458" "0x201f" +:status :good + +; ----------------------------------------------------------------------------- + +:mfg "Googlegear" +:model "2000" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Same as Artec Ultima 2000." + +; ----------------------------------------------------------------------------- + +:mfg "Lexmark" +:url "http://www.lexmark.com/" +:model "X70" +:interface "USB" +:usbid "0x043d" "0x002d" +:status :good +:comment "Works, some resolutions fail at 16 bit" + +:model "X73" +:interface "USB" +:usbid "0x043d" "0x002d" +:status :good +:comment "Works, some resolutions fail at 16 bit, same as X70" + +; ----------------------------------------------------------------------------- + +:mfg "Medion/Lifetec/Tevion/Cytron" +:url "http://www.medion.com" +:comment "Sold by Aldi and Tchibo." + +:model "MD 4394" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Product id 0x4002. If you have 0x4003, use artec_eplus48u backend." + +:model "MD/LT 9375" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :untested +:comment "Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test." + +:model "MD/LT 9385" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Similar to Artec Ultima 2000" + +:model "LT 9452" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Similar to Mustek ScanExpress 1200 UB Plus" + +:model "MD 9458" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Similar to Artec Ultima 2000 (e+?)" + +; ----------------------------------------------------------------------------- + +:mfg "Mustek" +:url "http://www.mustek.com/" +:url "http://www.mustek.com.tw/" +:url "http://www.mustek.de/" + +:model "BearPaw 1200 CS" +:interface "USB" +:usbid "0x055f" "0x021e" +:status :good + +:model "BearPaw 1200 CU" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good + +:model "BearPaw 1200 CU Plus" +:interface "USB" +:usbid "0x055f" "0x021b" +:status :good + +:model "BearPaw 1200 CU Plus" +:interface "USB" +:usbid "0x055f" "0x021c" +:status :good + +:model "BearPaw 1200 TA" +:interface "USB" +:usbid "0x055f" "0x021e" +:status :good +:comment "Transparency adapter supported" + +:model "BearPaw 1248 CU" +:interface "USB" +:usbid "0x055f" "0x021c" +:status :good +:comment "Seems to use the same ids as BearPaw 1200 CU Plus." + +:model "BearPaw 2400 CS" +:interface "USB" +:usbid "0x055f" "0x0218" +:status :untested +:comment "Probably works, reports are welcome" + +:model "BearPaw 2400 CS Plus" +:interface "USB" +:usbid "0x055f" "0x0219" +:status :good +:comment "Works, problems with 12/16 bit modes?" + +:model "BearPaw 2400 CU" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :basic +:comment "Works, but is slow" + +:model "BearPaw 2400 CU Plus" +:interface "USB" +:usbid "0x055f" "0x021d" +:status :good + +:model "BearPaw 2400 TA" +:interface "USB" +:usbid "0x055f" "0x0218" +:status :good +:comment "Transparency adapter supported" + +:model "BearPaw 2400 TA Plus" +:interface "USB" +:usbid "0x055f" "0x0219" +:status :good +:comment "Transparency adapter supported" + +:model "BearPaw 2448 CS Plus" +:interface "USB" +:usbid "0x055f" "0x021a" +:status :basic +:comment "Slow. Same as 2448 TA Plus, but without TA." + +:model "BearPaw 2448 TA Plus" +:interface "USB" +:usbid "0x055f" "0x021a" +:status :basic +:comment "Slow. Transparency adapter supported. Slow. Brightness depends on resolution?" + +:model "Plug-n-Scan 2400 MT" +:interface "USB" +:usbid "0x055f" "0x0219" +:status :good +:comment "Works but is slow in high resolutions. Same as BearPaw 2400 TA Plus." + +:model "Plug-n-Scan 2400 M" +:interface "USB" +:usbid "0x055f" "0x0219" +:status :good +:comment "Works but is slow in high resolutions. Same as BearPaw 2400 CS Plus." + +:model "ScanExpress 1200 UB Plus" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good + +:model "ScanExpress 1248 UB" +:interface "USB" +:usbid "0x055f" "0x021f" +:status :complete + +:model "ScanExpress 2400 USB" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :minimal +:comment "Should be detected but may need some more work in the code. Testers welcome. Please contact me if you own this scanner." + +:model "ScanExpress A3 USB" +:interface "USB" +:usbid "0x055f" "0x0210" +:status :basic +:comment "Still some vertical stripes." + +:model "ScanMagic 1200 UB Plus" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Same as ScanExpress 1200 UB Plus" + +; ----------------------------------------------------------------------------- + +:mfg "NeatReceipts" + +:model "Scanalizer Professional 2.5" +:interface "USB" +:usbid "0x07b3" "0x0412" +:status :untested +:comment "Similar to Plustek OpticSlim M12. Please tell us if this scanner works." + +:model "Mobile Scanner" +:interface "USB" +:usbid "0x07b3" "0x0462" +:status :basic +:comment "Similar to Plustek OpticSlim M12." +; ----------------------------------------------------------------------------- + + +:mfg "Nortek" + +:model "MyScan 1200" +:interface "USB" +:usbid "0x07b3" "0x040b" +:status :untested +:comment "Untested. Please test. Similar to Plustek OpticPro S12?" +; ----------------------------------------------------------------------------- + +:mfg "Packard Bell" + +:model "Diamond 1200" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Similar to Mustek BearPaw 1200 (Plus)" + +:model "Diamond 1200 Plus" +:interface "USB" +:usbid "0x055f" "0x021c" +:status :good +:comment "Similar to Mustek BearPaw 1200 Plus" + +:model "Diamond 1200 Plus" +:interface "USB" +:usbid "0x055f" "0x021b" +:status :good +:comment "Similar to Mustek BearPaw 1200 Plus" + +:model "Diamond 2450" +:interface "USB" +:usbid "0x055f" "0x0219" +:status :good + +; ----------------------------------------------------------------------------- + +:mfg "Plustek" +:url "http://www.plustek.de/" +:url "http://www.plustek.com/" + +:model "OpticPro 1248U" +:interface "USB" +:usbid "0x07b3" "0x0400" +:status :good + +:model "OpticPro 1248U" +:interface "USB" +:usbid "0x07b3" "0x0401" +:status :good + +:model "OpticPro U16B" +:interface "USB" +:usbid "0x07b3" "0x0402" +:status :good + +:model "OpticPro U16B+" +:interface "USB" +:usbid "0x07b3" "0x0403" +:status :good + +:model "OpticPro UT16B" +:interface "USB" +:usbid "0x07b3" "0x0403" +:status :untested +:comment "Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. " + +:model "OpticPro S12" +:interface "USB" +:usbid "0x07b3" "0x040b" +:status :good +:comment "Product ID 0x040b only." + +:model "OpticPro S24" +:interface "USB" +:usbid "0x07b3" "0x040e" +:status :good +:comment "Product ID 0x040e only. Is reported to work." + +:model "OpticPro ST12" +:interface "USB" +:usbid "0x07b3" "0x040b" +:status :untested +:comment "Product ID 0x040b only. Needs testing. Transparency adapter completely untested. Please contact me if you own such a scanner." + +:model "OpticSlim 1200" +:interface "USB" +:usbid "0x07b3" "0x0413" +:status :good + +:model "OpticSlim 2400" +:interface "USB" +:usbid "0x07b3" "0x0422" +:status :good +:comment "Works up to 1200 dpi." + +:model "OpticSlim 2400 plus" +:interface "USB" +:usbid "0x07b3" "0x0454" +:status :good +:comment "Same as OpticSlim 2400." + +:model "Iriscan Express 2" +:interface "USB" +:usbid "0x07b3" "0x045f" +:status :complete +:comment "Works up to 1200 dpi. Calibration with external calibration sheet supported" +; ----------------------------------------------------------------------------- + +:model "OpticSlim M12" +:interface "USB" +:usbid "0x07b3" "0x0412" +:status :complete +:comment "Works up to 1200 dpi. Calibration with external calibration sheet supported" +; ----------------------------------------------------------------------------- + +:mfg "RevScan" +;:url "" + +:model "19200i" +:interface "USB" +:usbid "0x07b3" "0x0400" +:status :good +:comment "Similar to Plustek OpticPro 1248U" + +; ----------------------------------------------------------------------------- + +:mfg "Trust" +:url "http://www.trust-site.com" + +:model "240TH Easy Webscan Gold" +:interface "USB" +:usbid "0x055f" "0x0218" +:status :good +:comment "Same as Mustek Bearpaw 2400 TA plus." + +:model "Compact Scan USB 19200" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus)" + +:model "Direct WebScan 19200" +:interface "USB" +:usbid "0x055f" "0x021c" +:status :good +:comment "Same as Mustek BearPaw 1200 CU Plus (0x021c)." + +:model "Flat Scan USB 19200" +:interface "USB" +:usbid "0x05d8" "0x4002" +:status :good +:comment "Similar to Artec Ultima 2000" + +; ----------------------------------------------------------------------------- + +:mfg "Visioneer" +:url "http://www.visioneer.com/" + +:model "OneTouch 7300" +:interface "USB" +:usbid "0x04a7" "0x0444" +:status :good +:comment "Works upto 1200 dpi and 12 bits/color." + +; ----------------------------------------------------------------------------- -- cgit v1.2.3