From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-bh.man | 547 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 547 insertions(+) create mode 100644 doc/sane-bh.man (limited to 'doc/sane-bh.man') diff --git a/doc/sane-bh.man b/doc/sane-bh.man new file mode 100644 index 0000000..8306976 --- /dev/null +++ b/doc/sane-bh.man @@ -0,0 +1,547 @@ +.TH sane\-bh 5 "10 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-bh +.SH NAME +sane\-bh \- SANE backend for Bell+Howell Copiscan II series document +scanners +.SH DESCRIPTION +The +.B sane\-bh +library implements a SANE (Scanner Access Now Easy) backend that +provides access to Bell+Howell Copiscan II series document +scanners. The Copiscan II 6338 has been the primary scanner model +used during development and testing, but since the programming interface +for the entire series is consistent the backend should work for the +following scanner models. +.PP +.RS +COPISCAN II 6338 Duplex Scanner with ACE +.br +COPISCAN II 2135 Simplex Scanner +.br +COPISCAN II 2137(A) Simplex Scanner (with ACE) +.br +COPISCAN II 2138A Simplex Scanner with ACE +.br +COPISCAN II 3238 Simplex Scanner +.br +COPISCAN II 3338(A) Simplex Scanner (with ACE) +.br +.RE +.PP +If you have a Bell+Howell scanner and are able to test it with this +backend, please contact +.IR sane\-devel@lists.alioth.debian.org +with the model number and testing results. Have a look at +http://www.sane\-project.org/mailing\-lists.html concerning subscription to +sane\-devel. Additionally, the author is curious as to the likelihood of using +this backend with the newer 4000 and 8000 series scanners. If you have such a +beast, please let me know. +.PP +The Bell+Howell Copiscan II series document scanners are high +volume, high throughput scanners designed for document scanning +applications. As such, they are lineart/grayscale scanners supporting +a fixed number of fairly low resolutions (e.g. 200/240/300dpi). +However, they do have a number of interesting and useful features +suited to needs of document imaging applications. +This backend attempts to support as many of these features as possible. +.PP +The main technical reference used in writing this backend is the +.B Bell and Howell Copiscan II Remote SCSI Controller (RSC) OEM +.B Technical Manual Version 1.5. +The Linux SCSI programming HOWTO, the SANE API documentation, and +SANE source code were also extremely valuable resources. + +.PP +The latest backend release, additional information and helpful hints +are available from the backend homepage: +.br +.RS +.B http://www.martoneconsulting.com/sane\-bh.html +.RE +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +Where +.I special +is the path-name for the special device that corresponds to a SCSI +scanner. For SCSI scanners, the special device name must be a generic +SCSI device or a symlink to such a device. Under Linux, such a device +name takes a format such as +.I /dev/sga +or +.IR /dev/sg0 , +for example. See sane\-scsi(5) for details. +.SH CONFIGURATION +The contents of the +.I bh.conf +file is a list of device names that correspond to Bell+Howell +scanners. See sane\-scsi(5) on details of what constitutes a valid device name. +Additionally, options can be specified; these lines begin with the word "option". +Each option is described in detail below. Empty lines and lines starting +with a hash mark (#) are ignored. + +.SH OPTIONS +The following options can be specified in the +.I bh.conf +file. +.TP +.B disable\-optional\-frames +This option prevents the backend from sending any optional frames. This +option may be useful when dealing with frontends which do not support these +optional frames. When this option is in effect, the data is sent in a +SANE_FRAME_GRAY frame. The optional frames sent by this backend are: +SANE_FRAME_G31D, SANE_FRAME_G32D, SANE_FRAME_G42D and SANE_FRAME_TEXT. +These frames are generated based on the compression and barcode options. +These frames are never sent in preview mode. +.TP +.B fake\-inquiry +This option is used for debugging purposes and its use is not encouraged. +Essentially, it allows the backend to initialize in the absence of +a scanner. This is useful for development and not much else. +This option must be specified earlier in the configuration file than +the devices which are to be "faked". + +.SH FILES +.TP +.I @CONFIGDIR@/bh.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-bh.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-bh.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_BH +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 255 requests all debug output to be printed. Smaller +levels reduce verbosity. + +.SH "SUPPORTED FEATURES" +.TP +.B ADF support +With document scanners, automatic document feeder (ADF) support is a key +feature. The backend supports the ADF by default and returns +.B SANE_STATUS_NO_DOCS +when the out-of-paper condition is detected. The SANE frontend +.B scanadf +is a command line frontend that supports multi-page scans. It has been +used successfully with this backend. The SANE frontend +.B xsane +is an improved GUI frontend by Oliver Rauch. Support for multi-page +scans is included in xsane version 0.35 and above. + +.TP +.B Duplex scanning +Some models, such as the COPISCAN II 6338, support duplex scanning. That +is, they scan both sides of the document during a single pass through the +scanner (the scanner has two cameras). This backend supports duplex +scanning (with the +.B \-\-duplex +option). The front and back page images are delivered consecutively +as if they were separately scanned pages. + +.TP +.B Hardware compression +The scanner is capable of compressing the data into several industry +standard formats (CCITT G3, CCITT G3-2D, CCITT G4). This results in +increased performance as less data is passed from the scanner to the +host over the SCSI bus. The backend supports these compression formats +via the +.B \-\-g31d, \-\-g32d, \-\-g42d +options, respectively. Many SANE frontends are not equipped to deal with +these formats, however. The SANE frontend +.B scanadf +supports these optional frame formats. The compressed image data +is written directly to a file and can then be processed by a scan-script +using the +.B \-\-scan\-script +option. Examples of this are given on the scanadf homepage. + +.TP +.B Automatic Border Detection +The scanner can automatically detect the paper size and adjust the +scanning window geometry appropriately. The backend supports this +useful feature with the +.B \-\-autoborder +option. It is enabled by default. + +.TP +.B Batch Mode Scanning +The batch scan mode allows for maximum throughput. The Set Window +parameters must remain constant during the entire batch. + +.TP +.B Icon Generation +The Icon function generates a thumbnail of the full page image, that can be +transferred as if it were a separate page. This allows the host to +quickly display a thumbnail representation during the scanning operation. +Perhaps this would be a great way of implementing a preview scan, but +since a normal scan is so quick, it might not be worth the trouble. + +.TP +.B Multiple Sections +Multiple sections (scanning sub-windows) can be defined for the front and +back pages. Each section can have different characteristics (e.g. geometry, +compression). The sections are returned as if they were separately +scanned images. Additionally sections can be used to greatly enhance the +accuracy and efficiency of the barcode/patchcode decoding process by +limiting the search area to a small subset of the page. Most Copiscan II +series scanners support up to 8 user-defined sections. + +.TP +.B Support Barcode/Patchcode Decoding +The RSC unit can recognize Bar and Patch Codes of various types embedded +in the scanned image. The codes are decoded and the data is returned to +the frontend as a text frame. The text is encoded in xml and contains +a great deal of information about the decoded data such as the location +where it was found, its orientation, and the time it took to find. +Further information on the content of this text frame as well as some +barcode decoding examples can be found on the backend homepage. + +.SH LIMITATIONS +.TP +.B Decoding a single barcode type per scan +The RSC unit can search for up to six different barcode types at a time. +While the code generally supports this as well, the +.B \-\-barcode\-search\-bar +option only allows the user to specify a single barcode type. +Perhaps another option which allows a comma separated list of barcode +type codes could be added to address this. +.TP +.B Scanning a fixed number of pages in batch mode +The separation of front and back end functionality in SANE presents a +problem in supporting the 'cancel batch' functionality in the scanner. +In batch mode, the scanner is always a page ahead of the host. The host, +knowing ahead of time which page will be the last, can cancel batch mode +prior to initiating the last scan command. Currently, there is no mechanism +available for the frontend to pass this knowledge to the backend. +If batch mode is enabled and the \-\-end\-count terminates a scanadf session, +an extra page will be pulled through the scanner, but is neither read +nor delivered to the frontend. The issue can be avoided by specifying +\-\-batch=no when scanning a fixed number of pages. +.TP +.B Revision 1.2 Patch detector +There is an enhanced patchcode detection algorithm available in the RSC +with revision 1.2 or higher that is faster and more reliable than the +standard Bar/Patch code decoder. This is not currently supported. + +.SH OPTIONS +.TP +.B Scan Mode Options: +.TP +.B \-\-preview[=(yes|no)] [no] +Request a preview-quality scan. When preview is set to yes image +compression is disabled and the image is delivered in a +SANE_FRAME_GRAY frame. +.TP +.B \-\-mode lineart|halftone [lineart] +Selects the scan mode (e.g., lineart,monochrome, or color). +.TP +.B \-\-resolution 200|240|300dpi [200] +Sets the resolution of the scanned image. Each scanner model supports +a list of standard resolutions; only these resolutions can be used. +.TP +.B \-\-compression none|g31d|g32d|g42d [none] +Sets the compression mode of the scanner. Determines the type of data +returned from the scanner. Values are: +.RS +.br +.B none +\- uncompressed data \- delivered in a SANE_FRAME_GRAY frame +.br +.B g31d +\- CCITT G3 1 dimension (MH) \- delivered in a SANE_FRAME_G31D frame +.br +.B g32d +\- CCITT G3 2 dimensions (MR, K=4) \- delivered in a SANE_FRAME_G32D frame +.br +.B g42d +\- CCITT G4 (MMR) \- delivered in a SANE_FRAME_G42D frame +.br +NOTE: The use of g31d, g32d, and g42d compression values causes the backend +to generate optional frame formats which may not be supported by all SANE +frontends. +.RE + +.TP +.B Geometry Options: +.TP +.B \-\-autoborder[=(yes|no)] [yes] +Enable/Disable automatic image border detection. When enabled, the RSC unit +automatically detects the image area and sets the window geometry to match. +.TP +.B \-\-paper\-size Custom|Letter|Legal|A3|A4|A5|A6|B4|B5 [Custom] +Specify the scan window geometry by specifying the paper size of the +documents to be scanned. +.TP +.B \-\-tl\-x 0..297.18mm [0] +Top-left x position of scan area. +.TP +.B \-\-tl\-y 0..431.8mm [0] +Top-left y position of scan area. +.TP +.B \-\-br\-x 0..297.18mm [297.18] +Bottom-right x position of scan area. +.TP +.B \-\-br\-y 0..431.8mm [431.8] +Bottom-right y position of scan area. +.TP +.B Feeder Options: +.TP +.B \-\-source Automatic Document Feeder|Manual Feed Tray [Automatic Document Feeder] +Selects the scan source (such as a document feeder). This option is provided +to allow multiple image scans with xsane; it has no other purpose. +.TP +.B \-\-batch[=(yes|no)] [no] +Enable/disable batch mode scanning. Batch mode allows scanning at maximum throughput +by buffering within the RSC unit. This option is recommended when performing multiple +pages scans until the feeder is emptied. +.TP +.B \-\-duplex[=(yes|no)] [no] +Enable duplex (dual-sided) scanning. The scanner takes an image of each side +of the document during a single pass through the scanner. The front page is +delivered followed by the back page. Most options, such as compression, +affect both the front and back pages. +.TP +.B \-\-timeout\-adf 0..255 [0] +Sets the timeout in seconds for the automatic document feeder (ADF). +The value 0 specifies the hardware default value which varies based +on the scanner model. +.TP +.B \-\-timeout\-manual 0..255 [0] +Sets the timeout in seconds for semi-automatic feeder. The value 0 specifies +the hardware default value which varies based on the scanner model. +.TP +.B \-\-check\-adf[=(yes|no)] [no] +Check ADF Status prior to starting scan using the OBJECT POSITION command. +Note that this feature requires RSC firmware level 1.5 or higher and dip +switch 4 must be in the on position. NOTE: This option has not been tested +extensively and may produce undesirable results. +.TP +.B Enhancement: +.TP +.B \-\-control\-panel[=(yes|no)] [yes] +Enables the scanner's control panel for selecting image enhancement +parameters. When the option is set to no the following options are +used to control image enhancement. See the Bell+Howell scanner users' +guide for complete information on ACE functionality. +.TP +.B \-\-ace\-function \-4..4 [3] +Specify the Automatic Contrast Enhancement (ACE) Function. +.TP +.B \-\-ace\-sensitivity 0..9 [5] +Specify the Automatic Contrast Enhancement (ACE) Sensitivity. +.TP +.B \-\-brightness 0..255 [0] +Controls the brightness of the acquired image. Ignored for ACE +capable scanners. +.TP +.B \-\-threshold 0..255 [0] +Select minimum-brightness to get a white point. Ignored for ACE +capable scanners. +.TP +.B \-\-contrast 0..255 [inactive] +Controls the contrast of the acquired image. This option is not +currently used by the scanner (and perhaps never will be). +.TP +.B \-\-negative[=(yes|no)] [no] +Swap black and white, yielding a reverse-video image. +.TP +.B Icon: +.TP +.B \-\-icon\-width 0..3600pel (in steps of 8) [0] +Width of icon (thumbnail) image in pixels. +.TP +.B \-\-icon\-length 0..3600pel (in steps of 8) [0] +Length of icon (thumbnail) image in pixels. +.TP +.B Barcode Options: +.TP +.B \-\-barcode\-search\-bar [none] +Specifies the barcode type to search for. If this option is +not specified, or specified with a value of none, then the barcode decoding +feature is completely disabled. The valid barcode type are: +.RS +.br +.B none +.br +.B ean\-8 +.br +.B ean\-13 +.br +.B reserved\-ean\-add +.br +.B code39 +.br +.B code2\-5\-interleaved +.br +.B code2\-5\-3lines\-matrix +.br +.B code2\-5\-3lines\-datalogic +.br +.B code2\-5\-5lines\-industrial +.br +.B patchcode +.br +.B codabar +.br +.B codabar\-with\-start\-stop +.br +.B code39ascii +.br +.B code128 +.br +.B code2\-5\-5lines\-iata +.br +.RE +.TP +.B \-\-barcode\-search\-count 1..7 [3] +Number of times that the RSC performs the decoding algorithm. Specify +the smallest number possible to increase performance. If you are having +trouble recognizing barcodes, it is suggested that you increase this option +to its maximum value (7). +.TP +.B \-\-barcode\-search\-mode [horiz\-vert] +Chooses the orientation of barcodes to be searched. The valid orientations +are: +.RS +.br +.B horiz\-vert +.br +.B horizontal +.br +.B vertical +.br +.B vert\-horiz +.RE +.TP +.B \-\-barcode\-hmin 0..1660mm [5] +Sets the barcode minimum height in millimeters (larger values increase +recognition speed). Of course the actual barcodes in the document must be +of sufficient size. +.TP +.B \-\-barcode\-search\-timeout 20..65535us [10000] +Sets the timeout for barcode searching in milliseconds. When the timeout +expires, the decoder will stop trying to decode barcodes. +.TP +.B \-\-section [] +Specifies a series of image sections. A section can be used to gather +a subset image or to provide a small area for barcode decoding. +Each section is specified in the following format (units are in millimeters): +.PP +.B x++[:functioncode...] +.PP +Multiple sections can be specified by separating them with commas. +.PP +For example +.B 76.2x25.4+50.8+0:frontbar +identifies an area 3 inches wide and 1 inch high with a top left corner +at the top of the page two inches from the left hand edge of the page. +This section will be used for barcode decoding on the front page only. +.PP +For example +.B 50.8x25.4+25.4+0:frontbar:front:g42d +identifies an area 2 inches wide and 1 inch high with a top left corner +at the top of the page one inch from the left hand edge of the page. +This section will be used for barcode decoding on the front page as well +as generating an image compressed in g42d format. +.PP +Ordinarily barcodes are searched in the entire image. However, when you +specify sections all barcode searching is done within the specific sections +identified. This can significantly speed up the decoding process. + +The following functioncodes are available: +.RS +.br +.B front +\- generate an image for the front page section +.br +.B back +\- generate an image for the back page section +.br +.B frontbar +\- perform barcode search in front page section +.br +.B backbar +\- perform barcode search in back page section +.br +.B frontpatch +\- perform patchcode search in front page section +.br +.B backpatch +\- perform patchcode search in back page section +.br +.B none +\- use no image compression +.br +.B g31d +\- use Group 3 1 dimension image compression +.br +.B g32d +\- use Group 3 2 dimensions image compression +.br +.B g42d +\- use Group 4 2 dimensions image compression +.br +.RE +.PP +If you omit a compression functioncode, the full page compression setting +is used. If you specify multiple compression functioncodes, only the +last one is used. + +.TP +.B \-\-barcode\-relmax 0..255 [0] +Specifies the maximum relation from the widest to the smallest bar. +.TP +.B \-\-barcode\-barmin 0..255 [0] +Specifies the minimum number of bars in Bar/Patch code. +.TP +.B \-\-barcode\-barmax 0..255 [0] +Specifies the maximum number of bars in a Bar/Patch code. +.TP +.B \-\-barcode\-contrast 0..6 [3] +Specifies the image contrast used in decoding. Use higher values when +there are more white pixels in the code. +.TP +.B \-\-barcode\-patchmode 0..1 [0] +Controls Patch Code detection. + +.SH BUGS +This is a new backend; detailed bug reports are welcome -- and expected ;) +.PP +If you have found something that you think is a bug, please attempt to +recreate it with the SANE_DEBUG_BH environment variable set to +255, and send a report detailing the conditions surrounding the bug to +.IR sane\-devel@lists.alioth.debian.org . + +.SH "SEE ALSO" +sane(7), sane\-scsi(5), scanimage(1), scanadf(1) + +.SH AUTHOR +The sane\-bh backend was written by Tom Martone, based on the sane\-ricoh +backend by Feico W. Dillema and the bnhscan program by Sean Reifschneider +of tummy.com ltd. Some 8000 enhancements added by Mark Temple. -- cgit v1.2.3