From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-canon_pp.man | 232 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 doc/sane-canon_pp.man (limited to 'doc/sane-canon_pp.man') diff --git a/doc/sane-canon_pp.man b/doc/sane-canon_pp.man new file mode 100644 index 0000000..ae307cb --- /dev/null +++ b/doc/sane-canon_pp.man @@ -0,0 +1,232 @@ +.TH sane\-canon_pp 5 "11 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-canon_pp +.SH NAME +sane\-canon_pp \- SANE backend for Canon CanoScan Parallel Port flatbed scanners +.SH DESCRIPTION +The +.B sane\-canon_pp +library implements a SANE (Scanner Access Now Easy) backend that provides +access to the following Canon flatbed scanners: +.PP +.RS +CanoScan FB320P +.br +CanoScan FB620P +.br +CanoScan FB330P +.br +CanoScan FB630P +.br +CanoScan N340P +.br +CanoScan N640P +.br +CanoScan N640P ex +.br +.RE +.PP +No USB scanners are supported and there are no plans to support them in the +future. Other projects are working on support for USB scanners. See the +.B PROJECTS +file for more detail. The FB310P and FB610P are re-badged Avision scanners +which use a different command set, so are unlikely to be supported by this +backend in the future. +.PP +IMPORTANT: this is alpha code. While we have made every effort to make it as +reliable as possible, it will not always work as expected. Feedback is still +appreciated. Please send any bug reports to the maintainers as listed on the +web page (listed in +.B SEE ALSO +below). +.PP +. +.PP +.SH "DEVICE NAMES" +This backend expects device names of the form presented by libieee1284. These +names are highly dependent on operating system and version. + +On Linux 2.4 kernels this will be of the form +.I "parport0" +or older (2.2 and before) kernels may produce names like +.IR "0x378" +(the base address of your port) or simply +.IR "0" +depending on your module configuration. Check the contents of +.I /proc/parport +if it exists. If you don't want to specify a default port (or don't know its +name), the backend should be able to detect which port your scanner is on. + +.SH CONFIGURATION +The contents of the +.I canon_pp.conf +file is a list of options for the driver to use. Empty lines and lines +starting with a hash mark (#) are ignored. +.PP +The supported options are currently +.BR ieee1284 , +.BR calibrate , +.BR init_mode , +and +.BR force_nibble + +Option +.B ieee1284 +.IR port-name +defines which port to use. The format of port-name is OS dependent, based on +the names presented by libieee1284. Please only have one of these lines, or +all but one will be ignored. + +Option +.B calibrate +.IR cal-file +.IR [port-name] +defines which calibration file to use on a per-port basis. If you only have +one parport, the port-name argument may be omitted \- but be careful as this +will cause problems on multi-scanner systems. You may have as many of these +lines as you like, as long as each has a unique port name. The tilde (`~') +character is acceptable and will be expanded to the value of the HOME +environment. + +Option +.B init_mode +.IR +.IR [portname] +defines which initialisation (wake-up) mode to use on a per-port basis. +If you only have one parport, the portname argument may be omitted \- but +be careful as this may cause problems on multi-scanner systems. +You may have as many of these lines as you like, as long as each has a unique +port name. The valid initialisation modes are FB620P (which strobes 10101010 +and 01010101 on the data pins), FB630P (which strobes 11001100 and 00110011 +on the data pins) and AUTO, which will try FB630P mode first then FB620P mode +second. The FB620P mode is also used by the FB320P. The FB630P mode is used +by the FB330P, N340P, and N640P. + +Option +.B force_nibble +forces the driver to use nibble mode even if ECP mode is reported to work by +libieee1284. This works-around the rare issue of ECP mode being reported to +work by the library, then not working. + +.SH TIPS +.PP +Hit the "Calibrate" button before scanning. It vastly improves the quality of +scans. +.PP +To enable automatic detection of your scanner, uncomment the "canon_pp" line +from +.I @CONFIGDIR@/dll.conf +.PP +.SH FILES +.TP +.I @CONFIGDIR@/canon_pp.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-canon_pp.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-canon_pp.so +The shared library implementing this backend (present on systems that support +dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may contain +the configuration file. Under UNIX, the directories are separated by a colon +(`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable +is not set, the configuration file is searched in two default directories: +first, the current working directory (".") and then in @CONFIGDIR@. If the +value of the environment variable ends with the directory separator character, +then the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_CANON_PP +If the library was compiled with debug support enabled, this environment +variable controls the debug level for this backend. Higher debug levels +increase the verbosity of the output. + +Example: +export SANE_DEBUG_CANON_PP=4 +.SH NOTES +.B Features available in the Windows interface +.TP +.B Brightness and Contrast +These are not implemented, and probably never will be. These appear to be +implemented entirely in software. Use GIMP or a similar program if you need +these features. +.TP +.B Descreen Mode +This appears on our first analysis to be just oversampling with an +anti-aliasing filter. Again, it seems to be implemented entirely in software, +so GIMP is your best bet for now. +.TP +.B Gamma Tables +This is under investigation, but for now only a simple gamma profile (ie: the +one returned during calibration) will be loaded. +.PP +.B Communication Problems +.PP +ECP mode in libieee1284 doesn't always work properly, even with new hardware. +We believe that this is a ppdev problem. If you change the configuration file +to include +.B force_nibble +, the problem will go away, but you will only be able to scan in nibble mode. +.PP +Sometimes the scanner can be left in a state where our code cannot revive it. +If the backend reports no scanner present, try unplugging the power and +plugging it back in. Also try unplugging printers from the pass-through port. +.PP +The scanner will not respond correctly to our commands when you first plug in +the power. You may find if you try a scan very soon after plugging in the +power that the backend will incorrectly report that you have no scanner present. +To avoid this, give it about 10 seconds to reset itself before attempting any +scans. +.PP +.B Repeated Lines +.PP +Sometimes at high resolutions (ie. 600dpi) you will notice lines which appear +twice. These lines correspond to points where the scanner head has stopped +during the scan (it stops every time the internal 64kb buffer is full). +Basically it's a mechanical problem inside the scanner, that the tolerance of +movement for a start/stop event is greater than 1/600 inches. I've never tried +the windows driver so I'm not sure how (or if) it works around this problem, +but as we don't know how to rewind the scanner head to do these bits again, +there's currently no nice way to deal with the problem. +.PP +.B Grey-scale Scans +.PP +Be aware that the scanner uses the green LEDs to read grey-scale scans, meaning +green coloured things will appear lighter than normal, and red and blue +coloured items will appear darker than normal. For high-accuracy grey-scale +scans of colour items, it's best just to scan in colour and convert to +grey-scale in graphics software such as the GIMP. +.PP +.B FB620P/FB320P Caveats +.PP +These models can not be reset in the same way as the others. The windows driver +doesn't know how to reset them either \- when left with an inconsistent scanner, +it will start scanning half way down the page! +.PP +Aborting is known to work correctly on the FB*30P models, and is known to be +broken on the FB*20P models. The FB620P which I tested on simply returns +garbage after a scan has been aborted using the method we know. +Aborting is able to leave the scanner in a state where it can be shut down, +but not where another scan can be made. + + +.SH "SEE ALSO" +sane(7), sane\-dll(5) +.BR +http://canon\-fb330p.sourceforge.net/ + +.SH AUTHOR +This backend is primarily the work of Simon Krix (Reverse Engineering), and +Matthew Duggan (SANE interface). +.PP +Many thanks to Kevin Easton for his comments and help, and Kent A. Signorini +for his help with the N340P. + -- cgit v1.2.3