From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-coolscan.man | 111 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 doc/sane-coolscan.man (limited to 'doc/sane-coolscan.man') diff --git a/doc/sane-coolscan.man b/doc/sane-coolscan.man new file mode 100644 index 0000000..bf83014 --- /dev/null +++ b/doc/sane-coolscan.man @@ -0,0 +1,111 @@ +.TH sane\-coolscan 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-coolscan + +.SH NAME +sane\-coolscan \- SANE backend for Nikon film-scanners + +.SH ABOUT THIS FILE + +This file is a short description of the coolscan-backend for sane! + +.SH DESCRIPTION + +The +.B sane\-coolscan +library implements a SANE backend that provides the interface to the following Nikon Coolscan Film scanners: Nikon LS20, LS30, LS1000, LS2000. + +.B Even though the backend has worked for a number of people, there are still some problems, especially in combination with some SCSI card/drivers (AHA-1505/aha152x.o) and the autofocus command. You should consider this backend 'alpha' and be careful when using it the first time. + +.SH CONFIGURATION + +The configuration file for this backend resides in +.IR @CONFIGDIR@/coolscan.conf . + +Its contents is a list of device names that correspond to Nikon Coolscan scanners. Empty lines +and lines starting with a hash mark (#) are ignored. A sample configuration file is +shown below: + +.nf + #scsi Vendor Model Type + scsi Nikon * Scanner + /dev/scanner +.fi + +The special device name must be a generic SCSI device or a symlink to such a device. +To find out to which device your scanner is assigned and how you have to set the +permissions of that device, have a look at sane\-scsi. + +.SH SCSI ADAPTER TIPS + +Some SCSI-adapters and low-level SCSI drivers do not work correctly with this backend and the +Coolscan scanners. These systems hang when the autofocus command is send to the Scanner. +To see a list of which card/driver combinations work or dont work have a look at: +http://andreas.rick.free.fr/sane/autofocus.html. + + + +.SH FILES + +.TP +The backend configuration file: +.I @CONFIGDIR@/coolscan.conf +.TP +The static library implementing this backend: +.I @LIBDIR@/libsane\-coolscan.a +.TP +The shared library implementing this backend: +.I @LIBDIR@/libsane\-coolscan.so +(present on systems that support dynamic loading) + +.SH ENVIRONMENT + +.TP +.B SANE_DEBUG_COOLSCAN +If the library was compiled with debug support enabled, this environment +variable controls the debug level for this backend. E.g., a value of 128 +requests all debug output to be printed. Smaller levels reduce verbosity: +SANE_DEBUG_COOLSCAN values + +Examples: + +on bash: +.br +export SANE_DEBUG_COOLSCAN=8 + +on csh: +.br +setenv SANE_DEBUG_COOLSCAN 8 + +.SH BUGS + +The autofocus command does not work with some SCSI card/driver combinations +.PP +The gamma table is not implemented for the LS1000 yet. +.PP +The dust-removal is not working yet + +.SH SEE ALSO + +.TP +.I http://andreas.rick.free.fr/sane/ +The homepage of this backend +.TP +.I http://www.sema.be/coolscan/ +The original version of the coolscan backend by Didier +.PP +sane(7), sane\-scsi(5) + +.SH THANKS TO + +.PP +Didier Carlier \- For writing the original Coolscan backend (without it I would not have started this) +.PP +Oliver Rauch \- For adapting xsane so quickly to the infrared stuff. +.PP +All the other people working on SANE. + +.SH AUTHOR +Andreas Rick + +.SH EMAIL-CONTACT +andreas.rick@free.fr -- cgit v1.2.3