From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-dc210.man | 107 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 doc/sane-dc210.man (limited to 'doc/sane-dc210.man') diff --git a/doc/sane-dc210.man b/doc/sane-dc210.man new file mode 100644 index 0000000..bc0db75 --- /dev/null +++ b/doc/sane-dc210.man @@ -0,0 +1,107 @@ +.TH sane\-dc210 5 "11 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-dc210 +.SH NAME +sane\-dc210 \- SANE backend for Kodak DC210 Digital Camera +.SH DESCRIPTION +The +.B sane\-dc210 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to the Kodak DC210 camera. THIS IS EXTREMELY ALPHA +CODE! USE AT YOUR OWN RISK!! +.SH "DEVICE NAMES" +The current version of the backend only allows one camera to be +connected. The device name is always "0". +.SH CONFIGURATION +The contents of the +.I dc210.conf +specify the serial port and baud rate to use. The baud rate +specifies the maximum rate to use while downloading pictures. (The +camera is always initialized using 9600 baud, then switches to the +higher rate). On my 90MHz Pentium, I usually have no problems downloading +at 115200 baud as long as the system is not excessively busy and +the "interrupt-unmask flag" is set in the IDE driver (hdparm \-u1). +Supported baud rates are: 9600, 19200, 38400, 57600, and 115200. +.PP +The dumpinquiry line causes some information about the camera to +be printed. +.PP +cmdrespause specifies how many usec (1,000,000ths of a) between +writing the command and reading the result should be used. 125000 +seems to be the lowest I could go reliably. +.PP +breakpause is the time in 1,000,000ths of a usec between sending the +"back to default" break sending commands. +.PP +Empty lines and lines starting with a hash mark (#) are +ignored. A sample configuration file is shown below: +.PP +.RS +port=/dev/ttyS0 +.br +# this is a comment +.br +baud=115200 +.br +dumpinquiry +.br +cmdrespause=125000 +.br +breakpause=1000000 +.RE +.PP +.SH FILES +.TP +.I @CONFIGDIR@/dc210.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-dc210.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-dc210.so +The shared library implementing this backend (present on systems that +support dynamic loading). + +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_DC210 +If the library was compiled with debugging support enabled, this +environment variable controls the debug level for this backend. +A value of 128 requests maximally copious debug output; smaller +levels reduce verbosity. + +.SH "SEE ALSO" +sane(7) + +.SH AUTHOR +Brian J. Murrell +.PP +This backend is based somewhat on the dc25 backend included in this +package by Peter Fales. +.PP +The manpage was copied from the dc25 backend and somewhat edited by +Henning Meier-Geinitz. + +.SH BUGS +Known bugs/limitations are: ? +.PP +More general comments, suggestions, and inquiries about frontends +or SANE should go to the SANE Developers mailing list +(see http://www.sane\-project.org/mailing\-lists.html for details). +You must be subscribed to the list, otherwise your mail won't be +sent to the subscribers. -- cgit v1.2.3