From 6e9c41a892ed0e0da326e0278b3221ce3f5713b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Mon, 6 Oct 2014 14:00:40 +0200 Subject: Initial import of sane-backends version 1.0.24-1.2 --- doc/sane-microtek.man | 194 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 doc/sane-microtek.man (limited to 'doc/sane-microtek.man') diff --git a/doc/sane-microtek.man b/doc/sane-microtek.man new file mode 100644 index 0000000..84047dc --- /dev/null +++ b/doc/sane-microtek.man @@ -0,0 +1,194 @@ +.TH sane\-microtek 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.IX sane\-microtek +.SH NAME +sane\-microtek \- SANE backend for Microtek scanners +.SH DESCRIPTION +The +.B sane\-microtek +library implements a SANE (Scanner Access Now Easy) backend that +provides access to the "second generation" Microtek scanners. At present, +the following hardware is known to work with this backend: +.PP +.RS +Microtek ScanMaker E2, E3, E6 +.br +Microtek ScanMaker II, IIG, IIHR, IISP, III +.br +Microtek ScanMaker 35t, 35t+, 45t +.br +Microtek ScanMaker 600GS, 600ZS (see bug notes) +.br +Agfa StudioScan +.br +Agfa StudioScan II, StudioScan IIsi +.br +Agfa Arcus II (but not the "Arcus") +.br +Agfa DuoScan (preliminary) +.br +Vobis "Highscreen Realscan" +.br +Microtek Color PageWiz (preliminary) +.br +.PP +Transparent Media Adapter +.br +Document AutoFeeder +.br +.RE +.PP +The driver supports line art, halftone, 8bpp gray, and 24bpp color scans +at normal and "expanded" resolutions (i.e. 1200x1200 on an E6), fast scans +for color previews, and downloadable gamma tables. +.PP +The supported scanners are all SCSI scanners. However, some parallel +port models may work (under Linux), if they use a parport->scsi chip, +and if you can find a scsi->parport driver. This is known to be the +case for the Color PageWiz. +.PP +The driver does +.B not +support the newest Microtek scanners, such as the V330 and V660, which use +a new and very different SCSI-II command set. For those, try the alternate +.B microtek2 +backend. Most non-SCSI scanners would use the new command set. Most +scanners newer than the Scanmaker E6 would use the new command set. +.PP +If you own a Microtek scanner other than the ones listed above, tell us +what happens --- see the +.BR BUGS +section at the end of this document. +.PP +Although this manual page is generally updated with each release, +up-to-date information on new releases and extraneous helpful hints +are available from the backend homepage: +.br +.RS +.B http://www.mir.com/mtek/ +.RE + +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +Where +.I special +is the UNIX path-name for the special device that corresponds to the +scanner. The special device name must be a generic SCSI device or a +symlink to such a device. Under Linux, such a device name could be +.I /dev/sga +or +.IR /dev/sge , +for example. +.PP + +.SH CONFIGURATION +The contents of the +.I microtek.conf +file is a list of device names that correspond to Microtek +scanners. Empty lines and lines starting with a hash mark (#) are +ignored. A sample configuration file is shown below: +.PP +.RS +/dev/scanner +.br +# this is a comment +.br +/dev/sge +.RE +.PP +The configuration file may also contain the special tokens +.I norealcal +or +.I noprecal. +.I norealcal +will disable the use of magic, undocumented scanner calibration commands +which are known to work on the E6, but may not work with other models. +.I noprecal +will disable logic which tries to avoid scanner precalibration. This logic +would only have been activated if the magic calibration code was turned off. + +.PP +.SH FILES +.TP +.I @CONFIGDIR@/microtek.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I @LIBDIR@/libsane\-microtek.a +The static library implementing this backend. +.TP +.I @LIBDIR@/libsane\-microtek.so +The shared library implementing this backend (present on systems that +support dynamic loading). + +.SH ENVIRONMENT +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in @CONFIGDIR@. If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories "tmp/config", ".", and +"@CONFIGDIR@" being searched (in this order). +.TP +.B SANE_DEBUG_MICROTEK +If the library was compiled with debugging support enabled, this +environment variable controls the debug level for this backend. +A value of 128 requests maximally copious debug output; smaller +levels reduce verbosity. + +.SH "SEE ALSO" +sane(7), sane\-scsi(5) + +.SH AUTHOR +Matt Marjanovic + +.SH BUGS +Known bugs/limitations are: +.PP +.RS +Brightness and contrast broken. +.br +The 600GS is grayscale only, and will lock up if you select color. +(Unfortunately, the 600GS and 600ZS are indistinguishable by software.) +.br +.RE +.PP +i.e. don't complain about these --- but if brightness and/or contrast +.B do +work for you, please tell me. +.PP +If your scanner locks up, try setting the +.I norealcal +or +.I noprecal +option in the configuration file (first one, then both), and see if it helps. +(If it does, report it.) +.PP +Send lengthy bug reports and new scanner information to +.BR mtek\-bugs@mir.com . +All bug reports and new scanner inquiries should include an error log file. +You can generate copious +stderr output by setting the SANE_DEBUG_MICROTEK environment variable +described above. For example: +.PP +.RS +setenv SANE_DEBUG_MICROTEK 128 +.RE +.PP +More general comments, suggestions, and inquiries about frontends +or SANE should go to +.BR sane\-devel@lists.alioth.debian.org , +the SANE Developers mailing list. Have a look at +http://www.sane\-project.org/mailing\-lists.html concerning subscription to sane\-devel. -- cgit v1.2.3