From 1687222e1b9e74c89cafbb5910e72d8ec7bfd40f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 31 Jul 2019 16:59:49 +0200 Subject: New upstream version 1.0.28 --- sanei/Makefile.in | 704 ----------------------------------------------- sanei/sanei_DomainOS.c | 2 +- sanei/sanei_DomainOS.h | 1 - sanei/sanei_ab306.c | 4 +- sanei/sanei_access.c | 18 +- sanei/sanei_auth.c | 2 +- sanei/sanei_config.c | 10 +- sanei/sanei_config2.c | 2 +- sanei/sanei_init_debug.c | 24 +- sanei/sanei_lm983x.c | 14 +- sanei/sanei_magic.c | 103 ++++--- sanei/sanei_pa4s2.c | 22 +- sanei/sanei_pio.c | 46 ++-- sanei/sanei_pp.c | 70 ++--- sanei/sanei_pv8630.c | 2 +- sanei/sanei_scsi.c | 76 ++--- sanei/sanei_thread.c | 25 +- sanei/sanei_udp.c | 1 - sanei/sanei_usb.c | 427 +++++++++------------------- sanei/sanei_wire.c | 26 +- 20 files changed, 355 insertions(+), 1224 deletions(-) delete mode 100644 sanei/Makefile.in (limited to 'sanei') diff --git a/sanei/Makefile.in b/sanei/Makefile.in deleted file mode 100644 index c6fa654..0000000 --- a/sanei/Makefile.in +++ /dev/null @@ -1,704 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@HAVE_JPEG_TRUE@am__append_1 = sanei_jpeg.c -subdir = sanei -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/mkinstalldirs $(top_srcdir)/depcomp -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ - $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/acinclude.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/byteorder.m4 $(top_srcdir)/m4/stdint.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/sane/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libsanei_la_LIBADD = -am__libsanei_la_SOURCES_DIST = sanei_ab306.c sanei_constrain_value.c \ - sanei_init_debug.c sanei_net.c sanei_wire.c \ - sanei_codec_ascii.c sanei_codec_bin.c sanei_scsi.c \ - sanei_config.c sanei_config2.c sanei_pio.c sanei_pa4s2.c \ - sanei_auth.c sanei_usb.c sanei_thread.c sanei_pv8630.c \ - sanei_pp.c sanei_lm983x.c sanei_access.c sanei_tcp.c \ - sanei_udp.c sanei_magic.c sanei_ir.c sanei_jpeg.c -@HAVE_JPEG_TRUE@am__objects_1 = sanei_jpeg.lo -am_libsanei_la_OBJECTS = sanei_ab306.lo sanei_constrain_value.lo \ - sanei_init_debug.lo sanei_net.lo sanei_wire.lo \ - sanei_codec_ascii.lo sanei_codec_bin.lo sanei_scsi.lo \ - sanei_config.lo sanei_config2.lo sanei_pio.lo sanei_pa4s2.lo \ - sanei_auth.lo sanei_usb.lo sanei_thread.lo sanei_pv8630.lo \ - sanei_pp.lo sanei_lm983x.lo sanei_access.lo sanei_tcp.lo \ - sanei_udp.lo sanei_magic.lo sanei_ir.lo $(am__objects_1) -libsanei_la_OBJECTS = $(am_libsanei_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include/sane -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libsanei_la_SOURCES) -DIST_SOURCES = $(am__libsanei_la_SOURCES_DIST) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALLOCA = @ALLOCA@ -AMTAR = @AMTAR@ -AM_CFLAGS = @AM_CFLAGS@ -AM_CPPFLAGS = @AM_CPPFLAGS@ -I. -I$(srcdir) -I$(top_builddir)/include \ - -I$(top_srcdir)/include $(USB_CFLAGS) -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AM_LDFLAGS = @AM_LDFLAGS@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AVAHI_CFLAGS = @AVAHI_CFLAGS@ -AVAHI_LIBS = @AVAHI_LIBS@ -AWK = @AWK@ -BACKENDS = @BACKENDS@ -BACKEND_CONFS_ENABLED = @BACKEND_CONFS_ENABLED@ -BACKEND_LIBS_ENABLED = @BACKEND_LIBS_ENABLED@ -BACKEND_MANS_ENABLED = @BACKEND_MANS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLH = @DLH@ -DLLTOOL = @DLLTOOL@ -DL_LIBS = @DL_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -DVIPS = @DVIPS@ -DYNAMIC_FLAG = @DYNAMIC_FLAG@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -FIG2DEV = @FIG2DEV@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GPHOTO2_CPPFLAGS = @GPHOTO2_CPPFLAGS@ -GPHOTO2_LDFLAGS = @GPHOTO2_LDFLAGS@ -GPHOTO2_LIBS = @GPHOTO2_LIBS@ -GREP = @GREP@ -GS = @GS@ -HAVE_GPHOTO2 = @HAVE_GPHOTO2@ -IEEE1284_LIBS = @IEEE1284_LIBS@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_LOCKPATH = @INSTALL_LOCKPATH@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -JPEG_LIBS = @JPEG_LIBS@ -LATEX = @LATEX@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIBV4L_CFLAGS = @LIBV4L_CFLAGS@ -LIBV4L_LIBS = @LIBV4L_LIBS@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LOCKPATH_GROUP = @LOCKPATH_GROUP@ -LTALLOCA = @LTALLOCA@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINDEX = @MAKEINDEX@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MATH_LIB = @MATH_LIB@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PDFLATEX = @PDFLATEX@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -PNG_LIBS = @PNG_LIBS@ -POSUB = @POSUB@ -PPMTOGIF = @PPMTOGIF@ -PRELOADABLE_BACKENDS = @PRELOADABLE_BACKENDS@ -PRELOADABLE_BACKENDS_ENABLED = @PRELOADABLE_BACKENDS_ENABLED@ -PTHREAD_LIBS = @PTHREAD_LIBS@ -RANLIB = @RANLIB@ -RESMGR_LIBS = @RESMGR_LIBS@ -SANEI_SANEI_JPEG_LO = @SANEI_SANEI_JPEG_LO@ -SANE_CONFIG_PATH = @SANE_CONFIG_PATH@ -SCSI_LIBS = @SCSI_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SNMP_CFLAGS = @SNMP_CFLAGS@ -SNMP_CONFIG_PATH = @SNMP_CONFIG_PATH@ -SNMP_LIBS = @SNMP_LIBS@ -SOCKET_LIBS = @SOCKET_LIBS@ -STRICT_LDFLAGS = @STRICT_LDFLAGS@ -STRIP = @STRIP@ -SYSLOG_LIBS = @SYSLOG_LIBS@ -SYSTEMD_CFLAGS = @SYSTEMD_CFLAGS@ -SYSTEMD_LIBS = @SYSTEMD_LIBS@ -TIFF_LIBS = @TIFF_LIBS@ -USB_CFLAGS = @USB_CFLAGS@ -USB_LIBS = @USB_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -V_MAJOR = @V_MAJOR@ -V_MINOR = @V_MINOR@ -V_REV = @V_REV@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -configdir = @configdir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -effective_target = @effective_target@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -locksanedir = @locksanedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -noinst_LTLIBRARIES = libsanei.la -libsanei_la_SOURCES = sanei_ab306.c sanei_constrain_value.c \ - sanei_init_debug.c sanei_net.c sanei_wire.c \ - sanei_codec_ascii.c sanei_codec_bin.c sanei_scsi.c \ - sanei_config.c sanei_config2.c sanei_pio.c sanei_pa4s2.c \ - sanei_auth.c sanei_usb.c sanei_thread.c sanei_pv8630.c \ - sanei_pp.c sanei_lm983x.c sanei_access.c sanei_tcp.c \ - sanei_udp.c sanei_magic.c sanei_ir.c $(am__append_1) -EXTRA_DIST = linux_sg3_err.h os2_srb.h sanei_DomainOS.c sanei_DomainOS.h -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu sanei/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu sanei/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libsanei.la: $(libsanei_la_OBJECTS) $(libsanei_la_DEPENDENCIES) $(EXTRA_libsanei_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libsanei_la_OBJECTS) $(libsanei_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_ab306.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_access.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_auth.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_codec_ascii.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_codec_bin.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_config.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_config2.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_constrain_value.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_init_debug.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_ir.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_jpeg.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_lm983x.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_magic.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_net.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_pa4s2.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_pio.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_pp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_pv8630.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_scsi.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_tcp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_thread.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_udp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_usb.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sanei_wire.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/sanei/sanei_DomainOS.c b/sanei/sanei_DomainOS.c index 5473151..7b851a8 100644 --- a/sanei/sanei_DomainOS.c +++ b/sanei/sanei_DomainOS.c @@ -326,7 +326,7 @@ static void DomainSCSIWait(void) static status_$t sense_status; static pinteger sense_return_count; static int temp; - + /* Issue the sense command (wire, issue, wait, unwire */ sense_cdb_size = sizeof(scanner_sense_cdb); memcpy(&sense_cdb, scanner_sense_cdb, sense_cdb_size); diff --git a/sanei/sanei_DomainOS.h b/sanei/sanei_DomainOS.h index ff93503..8f88e5f 100644 --- a/sanei/sanei_DomainOS.h +++ b/sanei/sanei_DomainOS.h @@ -73,4 +73,3 @@ struct DomainServerCommon }; #endif /*DomainSenseSize*/ - diff --git a/sanei/sanei_ab306.c b/sanei/sanei_ab306.c index 898acf6..4483fec 100644 --- a/sanei/sanei_ab306.c +++ b/sanei/sanei_ab306.c @@ -294,7 +294,7 @@ sanei_ab306_open (const char *dev, int *fdp) status = sanei_ab306_get_io_privilege (i); if (status != SANE_STATUS_GOOD) return status; - + DBG(1, "sanei_ab306_ioport: using inb/outb access\n"); for (j = 0; j < NELEMS(wakeup); ++j) { @@ -477,7 +477,7 @@ sanei_ab306_rdata (int fd, int planes, SANE_Byte * buf, int lines, int bpl) do nstat = ab306_inb (p, p->base + 1); while (((p->lstat ^ nstat) & 0x10) == 0); - + if (p->port_fd >= 0) { /* the pixel-loop: */ diff --git a/sanei/sanei_access.c b/sanei/sanei_access.c index b77cdd9..cb19c5c 100644 --- a/sanei/sanei_access.c +++ b/sanei/sanei_access.c @@ -80,10 +80,10 @@ #ifdef ENABLE_LOCKING /** get the status/owner of a lock file * - * The function tries to open an existing lockfile. On success, it reads out + * The function tries to open an existing lockfile. On success, it reads out * the pid which is stored inside and tries to find out more about the status * of the process with the corresponding PID. - * + * * @param fn - the complete filename of the lockfile to check * @return * - PROCESS_SELF - the calling process is owner of the lockfile @@ -96,10 +96,10 @@ get_lock_status( char *fn ) char pid_buf[PID_BUFSIZE]; int fd, status; pid_t pid; - + fd = open( fn, O_RDONLY ); if( fd < 0 ) { - DBG( 2, "does_process_exist: open >%s< failed: %s\n", + DBG( 2, "does_process_exist: open >%s< failed: %s\n", fn, strerror(errno)); return PROCESS_OTHER; } @@ -155,7 +155,7 @@ sanei_access_init( const char *backend ) DBG( 2, "sanei_access_init: >%s<\n", backend); } -SANE_Status +SANE_Status sanei_access_lock( const char *devicename, SANE_Word timeout ) { #ifdef ENABLE_LOCKING @@ -164,7 +164,7 @@ sanei_access_lock( const char *devicename, SANE_Word timeout ) int fd, to, i; #endif - DBG( 2, "sanei_access_lock: devname >%s<, timeout: %u\n", + DBG( 2, "sanei_access_lock: devname >%s<, timeout: %u\n", devicename, timeout ); #ifndef ENABLE_LOCKING return SANE_STATUS_GOOD; @@ -179,7 +179,7 @@ sanei_access_lock( const char *devicename, SANE_Word timeout ) fd = open( fn, O_CREAT | O_EXCL | O_WRONLY, 0644 ); if (fd < 0) { - + if (errno == EEXIST) { switch( get_lock_status( fn )) { case PROCESS_DEAD: @@ -198,7 +198,7 @@ sanei_access_lock( const char *devicename, SANE_Word timeout ) DBG( 2, "sanei_access_lock: lock exists, waiting...\n" ); sleep(1); } else { - DBG( 1, "sanei_access_lock: open >%s< failed: %s\n", + DBG( 1, "sanei_access_lock: open >%s< failed: %s\n", fn, strerror(errno)); return SANE_STATUS_ACCESS_DENIED; } @@ -215,7 +215,7 @@ sanei_access_lock( const char *devicename, SANE_Word timeout ) #endif } -SANE_Status +SANE_Status sanei_access_unlock( const char *devicename ) { #ifdef ENABLE_LOCKING diff --git a/sanei/sanei_auth.c b/sanei/sanei_auth.c index cbba06c..9039187 100644 --- a/sanei/sanei_auth.c +++ b/sanei/sanei_auth.c @@ -36,7 +36,7 @@ If you write modifications of your own for SANE, it is your choice whether to permit this exception to apply to your modifications. - If you do not wish that, delete this exception notice. + If you do not wish that, delete this exception notice. This file implements an interface for user authorization using MD5 digest */ diff --git a/sanei/sanei_config.c b/sanei/sanei_config.c index c158766..0eaee9a 100644 --- a/sanei/sanei_config.c +++ b/sanei/sanei_config.c @@ -227,7 +227,7 @@ sanei_config_read (char *str, int n, FILE *stream) while( isspace( *start)) start++; - if (start != str) + if (start != str) do { *str++ = *start++; } while( *str); @@ -266,7 +266,7 @@ sanei_configure_attach (const char *config_file, SANEI_Config * config, } /* loop reading the configuration file, all line beginning by "option " are - * parsed for value to store in configuration structure, other line are + * parsed for value to store in configuration structure, other line are * used are device to try to attach */ while (sanei_config_read (line, PATH_MAX, fp) && status == SANE_STATUS_GOOD) @@ -292,7 +292,7 @@ sanei_configure_attach (const char *config_file, SANEI_Config * config, /* to ensure maximum compatibility, we accept line like: * option "option_name" "option_value" - * "option_name" "option_value" + * "option_name" "option_value" * So we parse the line 2 time to find an option */ /* check if it is an option */ lp = sanei_config_get_string (lp, &token); @@ -405,7 +405,7 @@ sanei_configure_attach (const char *config_file, SANEI_Config * config, config->descriptors[i]->type, config->descriptors[i]->name); } - + /* check decoded value */ status = sanei_check_value (config->descriptors[i], value); @@ -438,7 +438,7 @@ sanei_configure_attach (const char *config_file, SANEI_Config * config, /* to avoid every backend to depend on scsi and usb functions * we call back the backend for attach. In turn it will call * sanei_usb_attach_matching_devices, sanei_config_attach_matching_devices - * or other. This means 2 callback functions per backend using this + * or other. This means 2 callback functions per backend using this * function. */ DBG (3, "sanei_configure_attach: trying to attach with '%s'\n", lp2); diff --git a/sanei/sanei_config2.c b/sanei/sanei_config2.c index 44c6b93..cd9484d 100644 --- a/sanei/sanei_config2.c +++ b/sanei/sanei_config2.c @@ -149,6 +149,6 @@ sanei_config_attach_matching_devices (const char *name, if (type) free (type); } - else + else (*attach) (name); } diff --git a/sanei/sanei_init_debug.c b/sanei/sanei_init_debug.c index 0abb891..946aee9 100644 --- a/sanei/sanei_init_debug.c +++ b/sanei/sanei_init_debug.c @@ -107,16 +107,31 @@ sanei_init_debug (const char * backend, int * var) DBG (0, "Setting debug level of %s to %d.\n", backend, *var); } +static int +is_socket (int fd) +{ + struct stat sbuf; + + if (fstat(fd, &sbuf) == -1) return 0; + +#if defined(S_ISSOCK) + return S_ISSOCK(sbuf.st_mode); +#elif defined (S_IFMT) && defined(S_IFMT) + return (sbuf.st_mode & S_IFMT) == S_IFSOCK; +#else + return 0; +#endif +} + void sanei_debug_msg (int level, int max_level, const char *be, const char *fmt, va_list ap) { char *msg; - + if (max_level >= level) { -#ifdef S_IFSOCK - if ( 1 == isfdtype(fileno(stderr), S_IFSOCK) ) + if (is_socket(fileno(stderr))) { msg = (char *)malloc (sizeof(char) * (strlen(be) + strlen(fmt) + 4)); if (msg == NULL) @@ -132,12 +147,11 @@ sanei_debug_msg } } else -#endif { fprintf (stderr, "[%s] ", be); vfprintf (stderr, fmt, ap); } - + } } diff --git a/sanei/sanei_lm983x.c b/sanei/sanei_lm983x.c index 5b41985..62dfad9 100644 --- a/sanei/sanei_lm983x.c +++ b/sanei/sanei_lm983x.c @@ -4,7 +4,7 @@ Copyright (C) 2002-2004 Gerhard Jaeger This file is part of the SANE package. - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the @@ -96,20 +96,20 @@ sanei_lm983x_write( SANE_Int fd, SANE_Byte reg, DBG( 15, "sanei_lm983x_write: fd=%d, reg=%d, len=%d, increment=%d\n", fd, reg, len, increment); - + if( reg > _LM9831_MAX_REG ) { DBG( 1, "sanei_lm983x_write: register out of range (%u>%u)\n", reg, _LM9831_MAX_REG ); return SANE_STATUS_INVAL; } - + for( bytes = 0; len > 0; ) { max_len = _MIN( len, _MAX_TRANSFER_SIZE ); command_buffer[0] = 0; /* write */ command_buffer[1] = reg; /* LM983x register */ - + if( increment == SANE_TRUE ) { command_buffer[0] += 0x02; /* increase reg? */ command_buffer[1] += bytes; @@ -122,7 +122,7 @@ sanei_lm983x_write( SANE_Int fd, SANE_Byte reg, size = (max_len + _CMD_BYTE_CNT); result = sanei_usb_write_bulk( fd, command_buffer, &size ); - + if( SANE_STATUS_GOOD != result ) return result; @@ -183,7 +183,7 @@ sanei_lm983x_read( SANE_Int fd, SANE_Byte reg, if( SANE_STATUS_GOOD != result ) return result; - + if( size != _CMD_BYTE_CNT) { DBG( 1, "sanei_lm983x_read: short write while writing command " "(%d/_CMD_BYTE_CNT)\n", result); @@ -228,7 +228,7 @@ SANE_Bool sanei_lm983x_reset( SANE_Int fd ) DBG( 15, "sanei_lm983x_reset()\n" ); for( i = 0; i < _MAX_RETRY; i++ ) { - + /* Read the command register and check that the reset bit is not set * If it is set, clear it and return false to indicate that * the bit has only now been cleared diff --git a/sanei/sanei_magic.c b/sanei/sanei_magic.c index bfd56cc..3e71946 100644 --- a/sanei/sanei_magic.c +++ b/sanei/sanei_magic.c @@ -123,17 +123,17 @@ sanei_magic_despeck (SANE_Parameters * params, SANE_Byte * buffer, /* convert darkest pixel into a brighter threshold */ thresh = (thresh + 255*3 + 255*3)/3; - + /*loop over rows and columns around window */ for(k=-1; kformat == SANE_FRAME_GRAY && params->depth == 1){ for(i=bw; i> (7-(j+l)%8) & 1; if(hits) @@ -631,7 +631,7 @@ sanei_magic_rotate (SANE_Parameters * params, SANE_Byte * buffer, goto cleanup; } - if(params->format == SANE_FRAME_RGB || + if(params->format == SANE_FRAME_RGB || (params->format == SANE_FRAME_GRAY && params->depth == 8) ){ @@ -642,19 +642,19 @@ sanei_magic_rotate (SANE_Parameters * params, SANE_Byte * buffer, for (i=0; i= pwidth) continue; - + sourceY = centerY + (int)(-shiftY * slopeCos + shiftX * slopeSin); if (sourceY < 0 || sourceY >= height) continue; - + for (k=0; k= pwidth) continue; - + sourceY = centerY + (int)(-shiftY * slopeCos + shiftX * slopeSin); if (sourceY < 0 || sourceY >= height) continue; @@ -689,7 +689,7 @@ sanei_magic_rotate (SANE_Parameters * params, SANE_Byte * buffer, outbuf[i*bwidth + j/8] &= ~(1 << (7-(j%8))); /* fill in new bit */ - outbuf[i*bwidth + j/8] |= + outbuf[i*bwidth + j/8] |= ((buffer[sourceY*bwidth + sourceX/8] >> (7-(sourceX%8))) & 1) << (7-(j%8)); } @@ -726,7 +726,7 @@ sanei_magic_isBlank (SANE_Parameters * params, SANE_Byte * buffer, /*convert thresh from percent (0-100) to 0-1 range*/ thresh /= 100; - if(params->format == SANE_FRAME_RGB || + if(params->format == SANE_FRAME_RGB || (params->format == SANE_FRAME_GRAY && params->depth == 8) ){ @@ -783,7 +783,7 @@ sanei_magic_isBlank (SANE_Parameters * params, SANE_Byte * buffer, /* Divide the image into 1/2 inch squares, skipping a 1/4 inch * margin on all sides. If all squares are under the user's density, - * signal our caller to skip the image entirely, by returning + * signal our caller to skip the image entirely, by returning * SANE_STATUS_NO_DOCS */ SANE_Status sanei_magic_isBlank2 (SANE_Parameters * params, SANE_Byte * buffer, @@ -813,12 +813,12 @@ sanei_magic_isBlank2 (SANE_Parameters * params, SANE_Byte * buffer, for(yb=0; ybbytes_per_line + (xquarter + xb*xhalf) * Bpp; @@ -826,7 +826,7 @@ sanei_magic_isBlank2 (SANE_Parameters * params, SANE_Byte * buffer, /*count darkness of pix in this row*/ int rowsum = 0; - + for(x=0; xbytes_per_line + (xquarter + xb*xhalf) / 8; @@ -860,7 +860,7 @@ sanei_magic_isBlank2 (SANE_Parameters * params, SANE_Byte * buffer, /*count darkness of pix in this row*/ int rowsum = 0; - + for(x=0; x> (7-(x%8)) & 1; } @@ -898,7 +898,7 @@ sanei_magic_findTurn(SANE_Parameters * params, SANE_Byte * buffer, DBG(10,"sanei_magic_findTurn: start\n"); - if(params->format == SANE_FRAME_RGB || + if(params->format == SANE_FRAME_RGB || (params->format == SANE_FRAME_GRAY && params->depth == 8) ){ @@ -1125,7 +1125,7 @@ sanei_magic_turn(SANE_Parameters * params, SANE_Byte * buffer, } /*turn color & gray image*/ - if(params->format == SANE_FRAME_RGB || + if(params->format == SANE_FRAME_RGB || (params->format == SANE_FRAME_GRAY && params->depth == 8) ){ @@ -1282,7 +1282,7 @@ getTopEdge(int width, int height, int resolution, double topSlope = 0; int topOffset = 0; int topDensity = 0; - + int i,j; int pass = 0; @@ -1436,7 +1436,7 @@ getLine (int height, int width, int * buff, /* find central value of this 'bucket' */ slopeCenter[j] = ( - (double)j*(maxSlope-minSlope)/slopes+minSlope + (double)j*(maxSlope-minSlope)/slopes+minSlope + (double)(j+1)*(maxSlope-minSlope)/slopes+minSlope )/2; @@ -1525,7 +1525,7 @@ getLine (int height, int width, int * buff, maxDensity = lines[i][j]; } } - + DBG(15,"getLine: maxDensity %d\n",maxDensity); *finSlope = 0; @@ -1544,20 +1544,20 @@ getLine (int height, int width, int * buff, } } } - + if(0){ fprintf(stderr,"offsetCenter: "); for(j=0;j -1){ int byi = bot[i] - (slope * i); @@ -1677,7 +1677,7 @@ getLeftEdge (int width, int height, int * top, int * bot, /* Loop thru the image and look for first color change in each column. * Return a malloc'd array. Caller is responsible for freeing. */ -int * +int * sanei_magic_getTransY ( SANE_Parameters * params, int dpi, SANE_Byte * buffer, int top) { @@ -1715,7 +1715,7 @@ sanei_magic_getTransY ( /* load the buff array with y value for first color change from edge * gray/color uses a different algo from binary/halftone */ - if(params->format == SANE_FRAME_RGB || + if(params->format == SANE_FRAME_RGB || (params->format == SANE_FRAME_GRAY && params->depth == 8) ){ @@ -1734,10 +1734,10 @@ sanei_magic_getTransY ( } near *= winLen; far = near; - + /* move windows, check delta */ for(j=firstLine+direction; j!=lastLine; j+=direction){ - + int farLine = j-winLen*2*direction; int nearLine = j-winLen*direction; @@ -1770,10 +1770,10 @@ sanei_magic_getTransY ( int near = 0; for(i=0; i> (7-(i%8)) & 1; - + /* move */ for(j=firstLine+direction; j!=lastLine; j+=direction){ if((buffer[(j*width+i)/8] >> (7-(i%8)) & 1) != near){ @@ -1809,7 +1809,7 @@ sanei_magic_getTransY ( /* Loop thru the image height and look for first color change in each row. * Return a malloc'd array. Caller is responsible for freeing. */ -int * +int * sanei_magic_getTransX ( SANE_Parameters * params, int dpi, SANE_Byte * buffer, int left) { @@ -1848,7 +1848,7 @@ sanei_magic_getTransX ( /* load the buff array with x value for first color change from edge * gray/color uses a different algo from binary/halftone */ - if(params->format == SANE_FRAME_RGB || + if(params->format == SANE_FRAME_RGB || (params->format == SANE_FRAME_GRAY && params->depth == 8) ){ @@ -1867,10 +1867,10 @@ sanei_magic_getTransX ( } near *= winLen; far = near; - + /* move windows, check delta */ for(j=firstCol+direction; j!=lastCol; j+=direction){ - + int farCol = j-winLen*2*direction; int nearCol = j-winLen*direction; @@ -1888,7 +1888,7 @@ sanei_magic_getTransX ( near -= buffer[i*bwidth + nearCol*depth + k]; near += buffer[i*bwidth + j*depth + k]; } - + if(abs(near - far) > 50*winLen*depth - near*40/255){ buff[i] = j; break; @@ -1902,10 +1902,10 @@ sanei_magic_getTransX ( int near = 0; for(i=0; i> (7-(firstCol%8)) & 1; - + /* move */ for(j=firstCol+direction; j!=lastCol; j+=direction){ if((buffer[i*bwidth + j/8] >> (7-(j%8)) & 1) != near){ @@ -1938,4 +1938,3 @@ sanei_magic_getTransX ( return buff; } - diff --git a/sanei/sanei_pa4s2.c b/sanei/sanei_pa4s2.c index d1be0c0..282e6fd 100644 --- a/sanei/sanei_pa4s2.c +++ b/sanei/sanei_pa4s2.c @@ -37,7 +37,7 @@ If you write modifications of your own for SANE, it is your choice whether to permit this exception to apply to your modifications. - If you do not wish that, delete this exception notice. + If you do not wish that, delete this exception notice. This file implements an interface for the Mustek PP chipset A4S2 */ @@ -48,7 +48,7 @@ 3 - things nice to know 4 - code flow 5 - detailed flow - 6 - everything + 6 - everything These debug levels can be set using the environment variable SANE_DEBUG_SANEI_PA4S2 */ @@ -333,7 +333,7 @@ pa4s2_init (SANE_Status *status) } DBG (3, "pa4s2_init: %d ports reported by IEEE 1284 library\n", pplist.portc); - + for (n=0; nname); @@ -388,7 +388,7 @@ pa4s2_open (const char *dev, SANE_Status * status) #if !defined (HAVE_LIBIEEE1284) u_long base; #endif - + DBG (4, "pa4s2_open: trying to attach dev `%s`\n", dev); if ((result = pa4s2_init(status)) != 0) @@ -397,7 +397,7 @@ pa4s2_open (const char *dev, SANE_Status * status) DBG (1, "pa4s2_open: failed to initialize\n"); return result; } - + #if !defined (HAVE_LIBIEEE1284) { @@ -526,7 +526,7 @@ pa4s2_open (const char *dev, SANE_Status * status) if (ioperm (port[n].base, 5, 1)) { - DBG (1, "pa4s2_open: cannot get io privilege for port 0x%03lx\n", + DBG (1, "pa4s2_open: cannot get io privilege for port 0x%03lx\n", port[n].base); @@ -715,7 +715,7 @@ pa4s2_readbyte_nib (int fd) { u_char val; - + outbyte2 (fd, 0x05); val = inbyte1(fd); val >>= 4; @@ -891,7 +891,7 @@ pa4s2_close (int fd, SANE_Status * status) { #if defined(HAVE_LIBIEEE1284) - DBG (1, "pa4s2_close: can't free port '%s' (%s)\n", + DBG (1, "pa4s2_close: can't free port '%s' (%s)\n", pplist.portv[fd]->name, pa4s2_libieee1284_errorstr(result)); #else DBG (1, "pa4s2_close: can't free port 0x%03lx\n", port[fd].base); @@ -1034,7 +1034,7 @@ sanei_pa4s2_scsi_pp_get_status(int fd, u_char *status) /* * SCSI-over-parallel scanners need this done when a register is * selected - */ + */ SANE_Status sanei_pa4s2_scsi_pp_reg_select (int fd, int reg) { @@ -1430,7 +1430,7 @@ sanei_pa4s2_enable (int fd, int enable) /* io-permissions are not inherited after fork (at least not on linux 2.2, although they seem to be inherited on linux 2.4), so we should make sure we get the permission */ - + if (ioperm (port[fd].base, 5, 1)) { DBG (1, "sanei_pa4s2_enable: cannot get io privilege for port" @@ -1457,7 +1457,7 @@ sanei_pa4s2_enable (int fd, int enable) { #if defined(HAVE_LIBIEEE1284) - DBG (4, "sanei_pa4s2_enable: disable port '%s'\n", + DBG (4, "sanei_pa4s2_enable: disable port '%s'\n", pplist.portv[fd]->name); #else DBG (4, "sanei_pa4s2_enable: disable port 0x%03lx\n", port[fd].base); diff --git a/sanei/sanei_pio.c b/sanei/sanei_pio.c index 00e40ee..3290704 100644 --- a/sanei/sanei_pio.c +++ b/sanei/sanei_pio.c @@ -112,7 +112,7 @@ inb (u_long port) #define PORT_DEV "/dev/port" /* base 278 (lpt2) - + ioport stat ctrl offs 0 1 2 len 1 1 1 */ @@ -174,7 +174,7 @@ static int pio_write (const Port port, const u_char * buf, int n); static int pio_read (const Port port, u_char * buf, int n); static int pio_open (const char *dev, SANE_Status * status); -static inline int +static inline int pio_outb (const Port port, u_char val, u_long addr) { @@ -190,7 +190,7 @@ pio_outb (const Port port, u_char val, u_long addr) return 0; } -static inline int +static inline int pio_inb (const Port port, u_char * val, u_long addr) { @@ -206,7 +206,7 @@ pio_inb (const Port port, u_char * val, u_long addr) return 0; } -static inline int +static inline int pio_wait (const Port port, u_char val, u_char mask) { int stat = 0; @@ -268,7 +268,7 @@ pio_ctrl (const Port port, u_char val) return; } -static inline void +static inline void pio_delay (const Port port) { inb (port->base + PIO_STAT); /* delay */ @@ -276,14 +276,14 @@ pio_delay (const Port port) return; } -static inline void +static inline void pio_init (const Port port) { pio_ctrl (port, PIO_CTRL_IE); return; } -static void +static void pio_reset (const Port port) { int n; @@ -302,7 +302,7 @@ pio_reset (const Port port) return; } -static int +static int pio_write (const Port port, const u_char * buf, int n) { int k; @@ -356,7 +356,7 @@ pio_write (const Port port, const u_char * buf, int n) return k; } -static int +static int pio_read (const Port port, u_char * buf, int n) { int k; @@ -401,10 +401,10 @@ pio_read (const Port port, u_char * buf, int n) } /* - Open the device, must contain a valid port number (as string). + Open the device, must contain a valid port number (as string). */ -static int +static int pio_open (const char *dev, SANE_Status * status) { static int first_time = 1; @@ -481,7 +481,7 @@ pio_open (const char *dev, SANE_Status * status) return n; } -SANE_Status +SANE_Status sanei_pio_open (const char *dev, int *fdp) { SANE_Status status; @@ -490,7 +490,7 @@ sanei_pio_open (const char *dev, int *fdp) return status; } -void +void sanei_pio_close (int fd) { Port p = port + fd; @@ -512,7 +512,7 @@ sanei_pio_close (int fd) return; } -int +int sanei_pio_read (int fd, u_char * buf, int n) { if ((0 > fd) && (NELEMS (port) <= fd)) @@ -524,7 +524,7 @@ sanei_pio_read (int fd, u_char * buf, int n) return pio_read (&port[fd], buf, n); } -int +int sanei_pio_write (int fd, const u_char * buf, int n) { if ((0 > fd) && (NELEMS (port) <= fd)) @@ -546,30 +546,30 @@ SANE_Status sanei_pio_open (const char *dev, int *fdp) { int fp; - + /* open internal parallel port */ fp=open("/dev/parallel/parallel1",O_RDWR); - + *fdp=fp; if(fp<0) return SANE_STATUS_INVAL; return(SANE_STATUS_GOOD); } -void +void sanei_pio_close (int fd) { close(fd); return; } -int +int sanei_pio_read (int fd, u_char * buf, int n) { return(read(fd,buf,n)); } -int +int sanei_pio_write (int fd, const u_char * buf, int n) { return(write(fd,buf,n)); @@ -585,19 +585,19 @@ sanei_pio_open (const char *dev, int *fdp) } -void +void sanei_pio_close (int fd) { return; } -int +int sanei_pio_read (int fd, u_char * buf, int n) { return -1; } -int +int sanei_pio_write (int fd, const u_char * buf, int n) { return -1; diff --git a/sanei/sanei_pp.c b/sanei/sanei_pp.c index dec84ee..89f3232 100644 --- a/sanei/sanei_pp.c +++ b/sanei/sanei_pp.c @@ -38,7 +38,7 @@ * * If you write modifications of your own for SANE, it is your choice * whether to permit this exception to apply to your modifications. - * If you do not wish that, delete this exception notice. + * If you do not wish that, delete this exception notice. * * This file implements an interface for accessing the parallelport */ @@ -50,7 +50,7 @@ * 3 - things nice to know * 4 - code flow * 5 - detailed flow - * 6 - everything + * 6 - everything * * These debug levels can be set using the environment variable * SANE_DEBUG_SANEI_PP @@ -156,7 +156,7 @@ static unsigned long pp_thresh = 0; #if (defined (HAVE_IOPERM) || defined (HAVE_LIBIEEE1284)) && !defined (IO_SUPPORT_MISSING) typedef struct { - + #ifndef HAVE_LIBIEEE1284 const char name[6]; u_long base; /**< i/o base address */ @@ -166,7 +166,7 @@ typedef struct { u_int in_use; /**< port in use? */ u_int claimed; /**< port claimed? */ - + int caps; /**< port capabilities */ } PortRec, *Port; @@ -181,8 +181,8 @@ static PortRec port[_MAX_PORTS]; /** redefine the CAPability flags */ enum ieee1284_capabilities { - CAP1284_RAW = (1<<0), - CAP1284_NIBBLE = (1<<1), /* SPP mode */ + CAP1284_RAW = (1<<0), + CAP1284_NIBBLE = (1<<1), /* SPP mode */ CAP1284_BYTE = (1<<2), /* PS/2 bidirectional */ CAP1284_COMPAT = (1<<3), CAP1284_BECP = (1<<4), @@ -315,12 +315,12 @@ pp_showcaps( int caps ) char ct[1024]; ct[0] = '\0'; - + if( caps & CAP1284_NIBBLE ) { strcat( ct, "SPP " ); mode |= SANEI_PP_MODE_SPP; } - + if( caps & CAP1284_BYTE ) { strcat( ct, "PS/2 " ); mode |= SANEI_PP_MODE_BIDI; @@ -330,7 +330,7 @@ pp_showcaps( int caps ) strcat( ct, "EPP " ); mode |= SANEI_PP_MODE_EPP; } - + if( caps & CAP1284_EPPSWE ) { strcat( ct, "EPPSWE " ); mode |= SANEI_PP_MODE_EPP; @@ -357,13 +357,13 @@ pp_showcaps( int caps ) static int pp_probe( int fd ) { -#ifdef HAVE_IOPL +#ifdef HAVE_IOPL SANE_Byte c; int i, j; #endif SANE_Byte a, b; int retv = 0; - + DBG( 4, "pp_probe: port 0x%04lx\n", port[fd].base ); /* SPP check */ @@ -383,7 +383,7 @@ pp_probe( int fd ) #ifdef HAVE_IOPL /* clear at most 1k of data from FIFO */ - for( i = 1024; i > 0; i-- ) { + for( i = 1024; i > 0; i-- ) { a = inbyte402( fd ); if ((a & 0x03) == 0x03) goto no_ecp; @@ -428,7 +428,7 @@ pp_probe( int fd ) DBG( 4, "pp_probe: ECP with a %i byte FIFO present\n", i ); retv += CAP1284_ECP; } - + no_ecp: #endif /* check for PS/2 compatible port */ @@ -522,7 +522,7 @@ static int pp_set_scpmode( int fd ) { SANE_Byte tmp; DBG( 4, "pp_set_scpmode\n" ); - + #ifdef HAVE_IOPL tmp = inbyte402( fd ); tmp &= 0x1f; @@ -531,7 +531,7 @@ static int pp_set_scpmode( int fd ) tmp = inb_ctrl( fd ); tmp &= 0x0f; outb_ctrl ( fd, tmp ); - + return SANE_STATUS_GOOD; } @@ -547,7 +547,7 @@ static int pp_set_bidimode( int fd ) tmp = inb_ctrl( fd ); tmp = (tmp & 0x0f) | 0x20; outb_ctrl ( fd, tmp ); - + return SANE_STATUS_GOOD; } @@ -563,7 +563,7 @@ static int pp_set_eppmode( int fd ) tmp = inb_ctrl( fd ); tmp = (tmp & 0xf0) | 0x40; outb_ctrl ( fd, tmp ); - + return SANE_STATUS_GOOD; } @@ -572,7 +572,7 @@ static int pp_set_ecpmode( int fd ) #ifdef HAVE_IOPL SANE_Byte tmp; #endif - + DBG( 4, "pp_set_ecpmode\n" ); #ifdef HAVE_IOPL tmp = inbyte402( fd ); @@ -594,7 +594,7 @@ pp_setmode( int fd, int mode ) DBG( 2, "pp_setmode: mode not supported %d\n", mode ); return SANE_STATUS_UNSUPPORTED; } - + switch( mode ) { case SANEI_PP_MODE_SPP: ret = pp_set_scpmode( fd ); break; case SANEI_PP_MODE_BIDI: ret = pp_set_bidimode( fd ); break; @@ -715,13 +715,13 @@ pp_init( void ) } DBG( 3, "pp_init: %d ports reported by IEEE 1284 library\n", pplist.portc); - + for( i = 0; i < pplist.portc; i++ ) DBG( 6, "pp_init: port %d is `%s`\n", i, pplist.portv[i]->name); /* we support only up to _MAX_PORTS... */ if( pplist.portc > _MAX_PORTS ) { - DBG (1, "pp_init: Lib IEEE 1284 reports too much ports: %d\n", + DBG (1, "pp_init: Lib IEEE 1284 reports too much ports: %d\n", pplist.portc ); ieee1284_free_ports( &pplist ); @@ -759,7 +759,7 @@ pp_open( const char *dev, SANE_Status * status ) #else int result; #endif - + DBG( 4, "pp_open: trying to attach dev `%s`\n", dev ); #if !defined (HAVE_LIBIEEE1284) @@ -853,7 +853,7 @@ pp_open( const char *dev, SANE_Status * status ) /* TODO: insert FreeBSD compatible code here */ if( ioperm( port[i].base, 5, 1 )) { - DBG( 1, "pp_open: cannot get io privilege for port 0x%03lx\n", + DBG( 1, "pp_open: cannot get io privilege for port 0x%03lx\n", port[i].base); port[i].in_use = SANE_FALSE; @@ -867,7 +867,7 @@ pp_open( const char *dev, SANE_Status * status ) port[i].ecp_ctrl = inbyte402(i); port[i].ctrl = inb_ctrl(i); #endif - + /* check the capabilities of this port */ port[i].caps = pp_probe( i ); #endif @@ -908,7 +908,7 @@ pp_close( int fd, SANE_Status *status ) if( ioperm( port[fd].base, 5, 0 )) { #endif #if defined(HAVE_LIBIEEE1284) - DBG( 1, "pp_close: can't free port '%s' (%s)\n", + DBG( 1, "pp_close: can't free port '%s' (%s)\n", pplist.portv[fd]->name, pp_libieee1284_errorstr(result)); #else DBG( 1, "pp_close: can't free port 0x%03lx\n", port[fd].base ); @@ -930,7 +930,7 @@ SANE_Status sanei_pp_init( void ) { SANE_Status result; - + DBG_INIT(); result = pp_init(); @@ -1008,7 +1008,7 @@ sanei_pp_claim( int fd ) DBG( 2, "sanei_pp_claim: fd %d is invalid\n", fd ); return SANE_STATUS_INVAL; } - + result = ieee1284_claim (pplist.portv[fd]); if (result) { DBG (1, "sanei_pp_claim: failed (%s)\n", @@ -1018,7 +1018,7 @@ sanei_pp_claim( int fd ) #endif port[fd].claimed = SANE_TRUE; - + return SANE_STATUS_GOOD; } @@ -1032,11 +1032,11 @@ sanei_pp_release( int fd ) DBG( 2, "sanei_pp_release: fd %d is invalid\n", fd ); return SANE_STATUS_INVAL; } - + ieee1284_release( pplist.portv[fd] ); #endif port[fd].claimed = SANE_FALSE; - + return SANE_STATUS_GOOD; } @@ -1121,7 +1121,7 @@ sanei_pp_inb_data( int fd ) { #ifdef _PARANOIA DBG( 4, "sanei_pp_inb_data: called for fd %d\n", fd ); - + #if defined(HAVE_LIBIEEE1284) if ((fd < 0) || (fd >= pplist.portc)) { #else @@ -1139,7 +1139,7 @@ sanei_pp_inb_stat( int fd ) { #ifdef _PARANOIA DBG( 4, "sanei_pp_inb_stat: called for fd %d\n", fd ); - + #if defined(HAVE_LIBIEEE1284) if ((fd < 0) || (fd >= pplist.portc)) { #else @@ -1174,7 +1174,7 @@ sanei_pp_inb_epp( int fd ) { #ifdef _PARANOIA DBG( 4, "sanei_pp_inb_epp: called for fd %d\n", fd ); - + #if defined(HAVE_LIBIEEE1284) if ((fd < 0) || (fd >= pplist.portc)) { #else @@ -1224,7 +1224,7 @@ sanei_pp_setmode( int fd, int mode ) DBG( 2, "sanei_pp_setmode: invalid mode %d\n", mode ); return SANE_STATUS_INVAL; } - + #if defined(HAVE_LIBIEEE1284) switch( mode ) { case SANEI_PP_MODE_SPP: mode = M1284_NIBBLE; break; @@ -1267,7 +1267,7 @@ sanei_pp_udelay( unsigned long usec ) if( usec < pp_thresh ) return; - + do { gettimeofday( &now, NULL ); } while ((now.tv_sec < deadline.tv_sec) || diff --git a/sanei/sanei_pv8630.c b/sanei/sanei_pv8630.c index 848558e..c9bafce 100644 --- a/sanei/sanei_pv8630.c +++ b/sanei/sanei_pv8630.c @@ -5,7 +5,7 @@ Copyright (C) 2001 Marcio Teixeira This file is part of the SANE package. - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the diff --git a/sanei/sanei_scsi.c b/sanei/sanei_scsi.c index 2413d8f..ca3dbb0 100644 --- a/sanei/sanei_scsi.c +++ b/sanei/sanei_scsi.c @@ -252,11 +252,11 @@ static int unit_ready (int fd); #endif #if USE == SYSVR4_INTERFACE -# define MAX_DATA 56*1024 /* don't increase or kernel will dump - * tested with adsl, adsa and umax backend - * it depends on the lowend scsi - * drivers . But the most restriction - * is in the UNIXWARE KERNEL witch do +# define MAX_DATA 56*1024 /* don't increase or kernel will dump + * tested with adsl, adsa and umax backend + * it depends on the lowend scsi + * drivers . But the most restriction + * is in the UNIXWARE KERNEL witch do * not allow more then 64kB DMA transfers */ static char lastrcmd[16]; /* hold command block of last read command */ #endif @@ -875,7 +875,7 @@ sanei_scsi_open (const char *dev, int *fdp, int fd, i; #if USE == LINUX_INTERFACE static int first_time = 1; -#elif USE == MACOSX_INTERFACE +#elif USE == MACOSX_INTERFACE UInt8 *guid; int len; u_int d; @@ -909,7 +909,7 @@ sanei_scsi_open (const char *dev, int *fdp, With newer versions of the SG driver, check the available buffer size by opening all SG device files belonging to a scanner, issue the ioctl calls for setting and reading the reserved - buffer size, and take the smallest value. + buffer size, and take the smallest value. For older version of the SG driver, which don't support variable buffer size, try to read /proc/sys/kernel/sg-big-biff ; if @@ -958,7 +958,7 @@ sanei_scsi_open (const char *dev, int *fdp, if (sscanf (dev, "b%dt%dl%d", &bus, &target, &lun) != 3) { - DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n", + DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n", dev, strerror (errno)); return SANE_STATUS_INVAL; } @@ -1149,7 +1149,7 @@ sanei_scsi_open (const char *dev, int *fdp, } else { - DBG (1, "sanei_scsi_open: can't open device `%s´: %s\n", dev, + DBG (1, "sanei_scsi_open: can't open device `%s´: %s\n", dev, strerror (errno)); return SANE_STATUS_INVAL; } @@ -1163,7 +1163,7 @@ sanei_scsi_open (const char *dev, int *fdp, if (4 != sscanf (dev, "/dev/passthru0:%d,%d,%d,%d", &bus, &cnt, &id, &lun)) { - DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n", + DBG (1, "sanei_scsi_open: device name `%s´ is not valid: %s\n", dev, strerror (errno)); return SANE_STATUS_INVAL; } @@ -1222,21 +1222,21 @@ sanei_scsi_open (const char *dev, int *fdp, { char scsi_hca_name[20]; u_int hca = 0; - + if (sscanf (dev, "h%ub%ut%ul%u", &hca, &bus, &target, &lun) != 4) { DBG (1, "sanei_scsi_open: device name %s is not valid\n", dev); return SANE_STATUS_INVAL; } - + snprintf(scsi_hca_name, 19, "\\\\.\\Scsi%d:", hca); scsi_hca_name[19] = 0; - + fd = CreateFile(scsi_hca_name, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_FLAG_RANDOM_ACCESS, NULL ); - + if (fd == INVALID_HANDLE_VALUE) fd = -1; } #else @@ -1420,7 +1420,7 @@ sanei_scsi_open (const char *dev, int *fdp, else { /* we have a really old SG driver version, or we're not opening - an SG device file + an SG device file */ if (ioctl (fd, SG_GET_TIMEOUT, &ioctl_val) < 0) { @@ -2436,8 +2436,8 @@ issue (struct req *req) } #if 0 - /* Sometimes the Linux SCSI system reports bogus resid values. - Observed with lk 2.4.5, 2.4.13, aic7xxx and sym53c8xx drivers, + /* Sometimes the Linux SCSI system reports bogus resid values. + Observed with lk 2.4.5, 2.4.13, aic7xxx and sym53c8xx drivers, if command queueing is used. So we better issue only a warning */ if (status == SANE_STATUS_GOOD) @@ -2601,7 +2601,7 @@ issue (struct req *req) } static int /* Returns 1 if match with 'name' set, else 0 */ - + lx_scan_sg (int exclude_devnum, char *name, size_t name_len, int host, int channel, int id, int lun) { @@ -2636,7 +2636,7 @@ issue (struct req *req) } static int /* Returns 1 if match, else 0 */ - + lx_chk_devicename (int guess_devnum, char *name, size_t name_len, int host, int channel, int id, int lun) { @@ -2945,8 +2945,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, char *me = "sanei_scsi_find_devices"; char path[PATH_MAX]; char dev_name[128]; - struct dirent buf; - struct dirent *de; + struct dirent *buf; DIR *scsidevs; FILE *fp; char *ptr; @@ -2987,8 +2986,9 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, number = -1; for (;;) { - ret = readdir_r(scsidevs, &buf, &de); - if (ret != 0) + errno = 0; + buf = readdir (scsidevs); + if (errno != 0) { DBG (1, "%s: could not read directory %s: %s\n", me, SYSFS_SCSI_DEVICES, strerror(errno)); @@ -2996,14 +2996,14 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, break; } - if (de == NULL) + if (buf == NULL) break; - if (buf.d_name[0] == '.') + if (buf->d_name[0] == '.') continue; /* Extract bus, channel, id, lun from directory name b:c:i:l */ - ptr = buf.d_name; + ptr = buf->d_name; for (i = 0; i < 4; i++) { errno = 0; @@ -3028,7 +3028,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, if (*end && (*end != ':')) { - DBG (1, "%s: parse error on string %s (%d)\n", me, buf.d_name, i); + DBG (1, "%s: parse error on string %s (%d)\n", me, buf->d_name, i); i = 12; /* Skip */ break; @@ -3036,7 +3036,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, if (val > INT_MAX) { - DBG (1, "%s: integer value too large (%s)\n", me, buf.d_name); + DBG (1, "%s: integer value too large (%s)\n", me, buf->d_name); i = 12; /* Skip */ break; @@ -3059,11 +3059,11 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, for (i = 0; i < 3; i++) { ret = snprintf (path, PATH_MAX, "%s/%s/%s", - SYSFS_SCSI_DEVICES, buf.d_name, vmtfiles[i]); + SYSFS_SCSI_DEVICES, buf->d_name, vmtfiles[i]); if ((ret < 0) || (ret >= PATH_MAX)) { DBG (1, "%s: skipping %s/%s, PATH_MAX exceeded on %s\n", - me, SYSFS_SCSI_DEVICES, buf.d_name, vmtfiles[i]); + me, SYSFS_SCSI_DEVICES, buf->d_name, vmtfiles[i]); i = 12; /* Skip */ break; @@ -3179,7 +3179,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, scsireq_t hdr; int result; -/* xxx obsolete: +/* xxx obsolete: cdb_size = CDB_SIZE (*(u_char *) src); */ @@ -3201,7 +3201,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, /* The old variant: hdr.databuf = (char *) src + cdb_size; hdr.datalen = src_size; - xxxxxx huh? Shouldn´t the above line have been src_size - cdb_size) + xxxxxx huh? Shouldn´t the above line have been src_size - cdb_size) */ hdr.databuf = (char *) src; hdr.datalen = src_size; @@ -5013,7 +5013,7 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, #if USE == WIN32_INTERFACE SANE_Status -sanei_scsi_cmd2 (int fd, +sanei_scsi_cmd2 (int fd, const void *cmd, size_t cmd_size, const void *src, size_t src_size, void *dst, size_t * dst_size) @@ -5049,8 +5049,8 @@ sanei_scsi_cmd2 (int fd, pkt.sptd.DataBuffer = src; } else { - pkt.sptd.DataIn = SCSI_IOCTL_DATA_UNSPECIFIED; - } + pkt.sptd.DataIn = SCSI_IOCTL_DATA_UNSPECIFIED; + } pkt.sptd.TimeOutValue = sane_scsicmd_timeout; @@ -5081,7 +5081,7 @@ sanei_scsi_cmd2 (int fd, else { return SANE_STATUS_IO_ERROR; } - } + } else if (pkt.sptd.ScsiStatus != 0) { DBG (1, "sanei_scsi_cmd2: ScsiStatus is %d\n", pkt.sptd.ScsiStatus); @@ -5152,14 +5152,14 @@ sanei_scsi_find_devices (const char *findvendor, const char *findmodel, adapter = (PSCSI_ADAPTER_BUS_INFO)buffer; - for(i = 0; i < adapter->NumberOfBuses; i++) { + for(i = 0; i < adapter->NumberOfBuses; i++) { if (adapter->BusData[i].InquiryDataOffset == 0) { /* No device here */ continue; } - inquiry = (PSCSI_INQUIRY_DATA) (buffer + + inquiry = (PSCSI_INQUIRY_DATA) (buffer + adapter->BusData[i].InquiryDataOffset); while(1) { diff --git a/sanei/sanei_thread.c b/sanei/sanei_thread.c index fcf52c1..f701423 100644 --- a/sanei/sanei_thread.c +++ b/sanei/sanei_thread.c @@ -115,20 +115,22 @@ sanei_thread_is_forked( void ) /* Use this to mark a SANE_Pid as invaild instead of marking with -1. */ +#ifdef USE_PTHREAD static void sanei_thread_set_invalid( SANE_Pid *pid ) { #ifdef WIN32 #ifdef WINPTHREAD_API - *pid = 0; + *pid = (pthread_t) 0; #else pid->p = 0; #endif #else - *pid = -1; + *pid = (pthread_t) -1; #endif } +#endif /* Return if PID is a valid PID or not. */ SANE_Bool @@ -162,12 +164,12 @@ sanei_thread_pid_to_long( SANE_Pid pid ) #ifdef WIN32 #ifdef WINPTHREAD_API - rc = pid; + rc = (long) pid; #else rc = pid.p; #endif #else - rc = pid; + rc = (long) pid; #endif return rc; @@ -225,7 +227,7 @@ sanei_thread_begin( int (*func)(void *args), void* args ) DBG( 1, "_beginthread() failed\n" ); return -1; } - + DBG( 2, "_beginthread() created thread %d\n", pid ); return pid; } @@ -282,7 +284,7 @@ sanei_thread_begin( int (*func)(void *args), void* args ) DBG( 1, "resume_thread() failed\n" ); return -1; } - + DBG( 2, "spawn_thread() created thread %d\n", pid ); return pid; } @@ -374,7 +376,7 @@ restore_sigpipe( void ) sigemptyset( &act.sa_mask ); act.sa_flags = 0; act.sa_handler = SIG_DFL; - + DBG( 2, "restoring SIGPIPE to SIG_DFL\n" ); sigaction( SIGPIPE, &act, NULL ); } @@ -443,7 +445,7 @@ sanei_thread_begin( int (func)(void *args), void* args ) } else DBG( 2, "pthread_create() created thread %ld\n", - (SANE_Pid)thread ); + sanei_thread_pid_to_long(thread) ); return (SANE_Pid)thread; #else @@ -458,7 +460,7 @@ sanei_thread_begin( int (func)(void *args), void* args ) /* run in child context... */ int status = func( args ); - + /* don't use exit() since that would run the atexit() handlers */ _exit( status ); } @@ -511,10 +513,11 @@ sanei_thread_waitpid( SANE_Pid pid, int *status ) } if ( EDEADLK == rc ) { if ( (pthread_t)pid != pthread_self() ) { - /* call detach in any case to make sure that the thread resources + /* call detach in any case to make sure that the thread resources * will be freed, when the thread has terminated */ - DBG(2, "* detaching thread(%ld)\n", pid ); + DBG(2, "* detaching thread(%ld)\n", + sanei_thread_pid_to_long(pid) ); pthread_detach((pthread_t)pid); } } diff --git a/sanei/sanei_udp.c b/sanei/sanei_udp.c index ab316ea..b5bb8cc 100644 --- a/sanei/sanei_udp.c +++ b/sanei/sanei_udp.c @@ -229,4 +229,3 @@ sanei_udp_recvfrom(int fd, u_char * buf, int count, char **fromp) return l; } - diff --git a/sanei/sanei_usb.c b/sanei/sanei_usb.c index e4b23dc..6fd6040 100644 --- a/sanei/sanei_usb.c +++ b/sanei/sanei_usb.c @@ -1262,6 +1262,77 @@ sanei_usb_set_endpoint (SANE_Int dn, SANE_Int ep_type, SANE_Int ep) } } +#if HAVE_LIBUSB_LEGACY || HAVE_LIBUSB || HAVE_USBCALLS +static const char* sanei_usb_transfer_type_desc(SANE_Int transfer_type) +{ + switch (transfer_type) + { + case USB_ENDPOINT_TYPE_INTERRUPT: return "interrupt"; + case USB_ENDPOINT_TYPE_BULK: return "bulk"; + case USB_ENDPOINT_TYPE_ISOCHRONOUS: return "isochronous"; + case USB_ENDPOINT_TYPE_CONTROL: return "control"; + } + return NULL; +} + +// Similar sanei_usb_set_endpoint, but ignors duplicate endpoints +static void sanei_usb_add_endpoint(device_list_type* device, + SANE_Int transfer_type, + SANE_Int ep_address, + SANE_Int ep_direction) +{ + DBG(5, "%s: direction: %d, address: %d, transfer_type: %d\n", + __func__, ep_direction, ep_address, transfer_type); + + SANE_Int* ep_in = NULL; + SANE_Int* ep_out = NULL; + const char* transfer_type_msg = sanei_usb_transfer_type_desc(transfer_type); + + switch (transfer_type) + { + case USB_ENDPOINT_TYPE_INTERRUPT: + ep_in = &device->int_in_ep; + ep_out = &device->int_out_ep; + break; + case USB_ENDPOINT_TYPE_BULK: + ep_in = &device->bulk_in_ep; + ep_out = &device->bulk_out_ep; + break; + case USB_ENDPOINT_TYPE_ISOCHRONOUS: + ep_in = &device->iso_in_ep; + ep_out = &device->iso_out_ep; + break; + case USB_ENDPOINT_TYPE_CONTROL: + ep_in = &device->control_in_ep; + ep_out = &device->control_out_ep; + break; + } + + DBG(5, "%s: found %s-%s endpoint (address 0x%02x)\n", + __func__, transfer_type_msg, ep_direction ? "in" : "out", + ep_address); + + if (ep_direction) // in + { + if (*ep_in) + DBG(3, "%s: we already have a %s-in endpoint " + "(address: 0x%02x), ignoring the new one\n", + __func__, transfer_type_msg, *ep_in); + else + *ep_in = ep_address; + } + else + { + if (*ep_out) + DBG(3, "%s: we already have a %s-out endpoint " + "(address: 0x%02x), ignoring the new one\n", + __func__, transfer_type_msg, *ep_out); + else + *ep_out = ep_address; + } +} +#endif // HAVE_LIBUSB_LEGACY || HAVE_LIBUSB || HAVE_USBCALLS + SANE_Int sanei_usb_get_endpoint (SANE_Int dn, SANE_Int ep_type) { @@ -1460,132 +1531,12 @@ sanei_usb_open (SANE_String_Const devname, SANE_Int * dn) DBG (5, "sanei_usb_open: endpoint nr: %d\n", num); transfer_type = endpoint->bmAttributes & USB_ENDPOINT_TYPE_MASK; - address = - endpoint-> - bEndpointAddress & USB_ENDPOINT_ADDRESS_MASK; direction = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK; - DBG (5, "sanei_usb_open: direction: %d\n", direction); - - DBG (5, - "sanei_usb_open: address: %d transfertype: %d\n", - address, transfer_type); - - - /* save the endpoints we need later */ - if (transfer_type == USB_ENDPOINT_TYPE_INTERRUPT) - { - DBG (5, - "sanei_usb_open: found interrupt-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].int_in_ep) - DBG (3, - "sanei_usb_open: we already have a int-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].int_in_ep); - else - devices[devcount].int_in_ep = - endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].int_out_ep) - DBG (3, - "sanei_usb_open: we already have a int-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].int_out_ep); - else - devices[devcount].int_out_ep = - endpoint->bEndpointAddress; - } - } - else if (transfer_type == USB_ENDPOINT_TYPE_BULK) - { - DBG (5, - "sanei_usb_open: found bulk-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].bulk_in_ep) - DBG (3, - "sanei_usb_open: we already have a bulk-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].bulk_in_ep); - else - devices[devcount].bulk_in_ep = - endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].bulk_out_ep) - DBG (3, - "sanei_usb_open: we already have a bulk-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].bulk_out_ep); - else - devices[devcount].bulk_out_ep = - endpoint->bEndpointAddress; - } - } - else if (transfer_type == USB_ENDPOINT_TYPE_ISOCHRONOUS) - { - DBG (5, - "sanei_usb_open: found isochronous-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].iso_in_ep) - DBG (3, - "sanei_usb_open: we already have a isochronous-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].iso_in_ep); - else - devices[devcount].iso_in_ep = - endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].iso_out_ep) - DBG (3, - "sanei_usb_open: we already have a isochronous-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].iso_out_ep); - else - devices[devcount].iso_out_ep = - endpoint->bEndpointAddress; - } - } - else if (transfer_type == USB_ENDPOINT_TYPE_CONTROL) - { - DBG (5, - "sanei_usb_open: found control-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].control_in_ep) - DBG (3, - "sanei_usb_open: we already have a control-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].control_in_ep); - else - devices[devcount].control_in_ep = - endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].control_out_ep) - DBG (3, - "sanei_usb_open: we already have a control-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].control_out_ep); - else - devices[devcount].control_out_ep = - endpoint->bEndpointAddress; - } - } + sanei_usb_add_endpoint(&devices[devcount], transfer_type, + endpoint->bEndpointAddress, + direction); } } } @@ -1769,124 +1720,39 @@ sanei_usb_open (SANE_String_Const devname, SANE_Int * dn) for (num = 0; num < interface->bNumEndpoints; num++) { const struct libusb_endpoint_descriptor *endpoint; - int address, direction, transfer_type; + int direction, transfer_type, transfer_type_libusb; endpoint = &interface->endpoint[num]; DBG (5, "sanei_usb_open: endpoint nr: %d\n", num); - transfer_type = endpoint->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK; - address = endpoint->bEndpointAddress & LIBUSB_ENDPOINT_ADDRESS_MASK; + transfer_type_libusb = + endpoint->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK; direction = endpoint->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK; - DBG (5, "sanei_usb_open: direction: %d\n", direction); - DBG (5, "sanei_usb_open: address: %d transfertype: %d\n", - address, transfer_type); - - /* save the endpoints we need later */ - if (transfer_type == LIBUSB_TRANSFER_TYPE_INTERRUPT) - { - DBG (5, - "sanei_usb_open: found interrupt-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].int_in_ep) - DBG (3, - "sanei_usb_open: we already have a int-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].int_in_ep); - else - devices[devcount].int_in_ep = endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].int_out_ep) - DBG (3, - "sanei_usb_open: we already have a int-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].int_out_ep); - else - devices[devcount].int_out_ep = endpoint->bEndpointAddress; - } - } - else if (transfer_type == LIBUSB_TRANSFER_TYPE_BULK) - { - DBG (5, - "sanei_usb_open: found bulk-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].bulk_in_ep) - DBG (3, - "sanei_usb_open: we already have a bulk-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].bulk_in_ep); - else - devices[devcount].bulk_in_ep = endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].bulk_out_ep) - DBG (3, - "sanei_usb_open: we already have a bulk-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].bulk_out_ep); - else - devices[devcount].bulk_out_ep = endpoint->bEndpointAddress; - } - } - else if (transfer_type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS) - { - DBG (5, - "sanei_usb_open: found isochronous-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].iso_in_ep) - DBG (3, - "sanei_usb_open: we already have a isochronous-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].iso_in_ep); - else - devices[devcount].iso_in_ep = endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].iso_out_ep) - DBG (3, - "sanei_usb_open: we already have a isochronous-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].iso_out_ep); - else - devices[devcount].iso_out_ep = endpoint->bEndpointAddress; - } - } - else if (transfer_type == LIBUSB_TRANSFER_TYPE_CONTROL) - { - DBG (5, - "sanei_usb_open: found control-%s endpoint (address 0x%02x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].control_in_ep) - DBG (3, - "sanei_usb_open: we already have a control-in endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].control_in_ep); - else - devices[devcount].control_in_ep = endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].control_out_ep) - DBG (3, - "sanei_usb_open: we already have a control-out endpoint " - "(address: 0x%02x), ignoring the new one\n", - devices[devcount].control_out_ep); - else - devices[devcount].control_out_ep = endpoint->bEndpointAddress; - } - } + // don't rely on LIBUSB_TRANSFER_TYPE_* mapping to + // USB_ENDPOINT_TYPE_* even though they'll most likely be + // the same + switch (transfer_type_libusb) + { + case LIBUSB_TRANSFER_TYPE_INTERRUPT: + transfer_type = USB_ENDPOINT_TYPE_INTERRUPT; + break; + case LIBUSB_TRANSFER_TYPE_BULK: + transfer_type = USB_ENDPOINT_TYPE_BULK; + break; + case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS: + transfer_type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS; + break; + case LIBUSB_TRANSFER_TYPE_CONTROL: + transfer_type = USB_ENDPOINT_TYPE_CONTROL; + break; + + } + + sanei_usb_add_endpoint(&devices[devcount], + transfer_type, + endpoint->bEndpointAddress, + direction); } } } @@ -2016,62 +1882,21 @@ sanei_usb_open (SANE_String_Const devname, SANE_Int * dn) break; case USB_DT_ENDPOINT: endpoint = (struct usb_endpoint_descriptor*)pDescHead; - address = endpoint->bEndpointAddress; direction = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK; transfer_type = endpoint->bmAttributes & USB_ENDPOINT_TYPE_MASK; - /* save the endpoints we need later */ - if (transfer_type == USB_ENDPOINT_TYPE_INTERRUPT) - { - DBG (5, "sanei_usb_open: found interupt-%s endpoint (address %2x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].int_in_ep) - DBG (3, "sanei_usb_open: we already have a int-in endpoint " - "(address: %d), ignoring the new one\n", - devices[devcount].int_in_ep); - else - devices[devcount].int_in_ep = endpoint->bEndpointAddress; - } - else - if (devices[devcount].int_out_ep) - DBG (3, "sanei_usb_open: we already have a int-out endpoint " - "(address: %d), ignoring the new one\n", - devices[devcount].int_out_ep); - else - devices[devcount].int_out_ep = endpoint->bEndpointAddress; - } - else if (transfer_type == USB_ENDPOINT_TYPE_BULK) - { - DBG (5, "sanei_usb_open: found bulk-%s endpoint (address %2x)\n", - direction ? "in" : "out", address); - if (direction) /* in */ - { - if (devices[devcount].bulk_in_ep) - DBG (3, "sanei_usb_open: we already have a bulk-in endpoint " - "(address: %d), ignoring the new one\n", - devices[devcount].bulk_in_ep); - else - devices[devcount].bulk_in_ep = endpoint->bEndpointAddress; - } - else - { - if (devices[devcount].bulk_out_ep) - DBG (3, "sanei_usb_open: we already have a bulk-out endpoint " - "(address: %d), ignoring the new one\n", - devices[devcount].bulk_out_ep); - else - devices[devcount].bulk_out_ep = endpoint->bEndpointAddress; - } - } + + if (transfer_type == USB_ENDPOINT_TYPE_INTERRUPT || + transfer_type == USB_ENDPOINT_TYPE_BULK) + { + sanei_usb_add_endpoint(&devices[devcount], transfer_type, + endpoint->bEndpointAddress, direction); + } /* ignore currently unsupported endpoints */ else { DBG (5, "sanei_usb_open: ignoring %s-%s endpoint " "(address: %d)\n", - transfer_type == USB_ENDPOINT_TYPE_CONTROL ? "control" : - transfer_type == USB_ENDPOINT_TYPE_ISOCHRONOUS - ? "isochronous" : "interrupt", - direction ? "in" : "out", address); + sanei_usb_transfer_type_desc(transfer_type), + direction ? "in" : "out", address); continue; } break; @@ -2344,8 +2169,8 @@ sanei_usb_read_bulk (SANE_Int dn, SANE_Byte * buffer, size_t * size) if (ret < 0) { - DBG (1, "sanei_usb_read_bulk: read failed: %s\n", - sanei_libusb_strerror (ret)); + DBG (1, "sanei_usb_read_bulk: read failed (still got %d bytes): %s\n", + rsize, sanei_libusb_strerror (ret)); read_size = -1; } @@ -2372,9 +2197,10 @@ sanei_usb_read_bulk (SANE_Int dn, SANE_Byte * buffer, size_t * size) #ifdef HAVE_USBCALLS int rc; char* buffer_ptr = (char*) buffer; - while (*size) + size_t requested_size = *size; + while (requested_size) { - ULONG ulToRead = (*size>MAX_RW)?MAX_RW:*size; + ULONG ulToRead = (requested_size>MAX_RW)?MAX_RW:requested_size; ULONG ulNum = ulToRead; DBG (5, "Entered usbcalls UsbBulkRead with dn = %d\n",dn); DBG (5, "Entered usbcalls UsbBulkRead with dh = %p\n",dh); @@ -2392,7 +2218,7 @@ sanei_usb_read_bulk (SANE_Int dn, SANE_Byte * buffer, size_t * size) return SANE_STATUS_INVAL; } if (rc || (ulNum!=ulToRead)) return SANE_STATUS_INVAL; - *size -=ulToRead; + requested_size -=ulToRead; buffer_ptr += ulToRead; read_size += ulToRead; } @@ -2529,11 +2355,12 @@ sanei_usb_write_bulk (SANE_Int dn, const SANE_Byte * buffer, size_t * size) DBG (5, "Entered usbcalls UsbBulkWrite with bulk_out_ep = 0x%02x\n",devices[dn].bulk_out_ep); DBG (5, "Entered usbcalls UsbBulkWrite with interface_nr = %d\n",devices[dn].interface_nr); DBG (5, "Entered usbcalls UsbBulkWrite with usbcalls_timeout = %d\n",usbcalls_timeout); - while (*size) + size_t requested_size = *size; + while (requested_size) { - ULONG ulToWrite = (*size>MAX_RW)?MAX_RW:*size; + ULONG ulToWrite = (requested_size>MAX_RW)?MAX_RW:requested_size; - DBG (5, "size requested to write = %lu, ulToWrite = %lu\n",(unsigned long) *size,ulToWrite); + DBG (5, "size requested to write = %lu, ulToWrite = %lu\n",(unsigned long) requested_size,ulToWrite); if (devices[dn].bulk_out_ep){ rc = UsbBulkWrite (dh, devices[dn].bulk_out_ep, devices[dn].interface_nr, ulToWrite, (char*) buffer, usbcalls_timeout); @@ -2545,10 +2372,10 @@ sanei_usb_write_bulk (SANE_Int dn, const SANE_Byte * buffer, size_t * size) return SANE_STATUS_INVAL; } if (rc) return SANE_STATUS_INVAL; - *size -=ulToWrite; + requested_size -=ulToWrite; buffer += ulToWrite; write_size += ulToWrite; - DBG (5, "size = %d, write_size = %d\n",*size, write_size); + DBG (5, "size = %d, write_size = %d\n", requested_size, write_size); } #else /* not HAVE_USBCALLS */ { @@ -2619,7 +2446,6 @@ sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); - return SANE_STATUS_GOOD; #elif defined(__BEOS__) struct usb_scanner_ioctl_ctrlmsg c; @@ -2638,8 +2464,6 @@ sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); - - return SANE_STATUS_GOOD; #else /* not __linux__ */ DBG (5, "sanei_usb_control_msg: not supported on this OS\n"); return SANE_STATUS_UNSUPPORTED; @@ -2661,7 +2485,6 @@ sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); - return SANE_STATUS_GOOD; } #elif defined(HAVE_LIBUSB) { @@ -2678,7 +2501,6 @@ sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); - return SANE_STATUS_GOOD; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB*/ { @@ -2702,7 +2524,6 @@ sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, } if ((rtype & 0x80) && debug_level > 10) print_buffer (data, len); - return SANE_STATUS_GOOD; #else /* not HAVE_USBCALLS */ { DBG (1, "sanei_usb_control_msg: usbcalls support missing\n"); @@ -2716,6 +2537,7 @@ sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req, devices[dn].method); return SANE_STATUS_UNSUPPORTED; } + return SANE_STATUS_GOOD; } SANE_Status @@ -3160,7 +2982,6 @@ sanei_usb_get_descriptor( SANE_Int dn, desc->dev_sub_class = usb_descr->bDeviceSubClass; desc->dev_protocol = usb_descr->bDeviceProtocol; desc->max_packet_size = usb_descr->bMaxPacketSize0; - return SANE_STATUS_GOOD; } #elif defined(HAVE_LIBUSB) { @@ -3185,7 +3006,6 @@ sanei_usb_get_descriptor( SANE_Int dn, desc->dev_sub_class = lu_desc.bDeviceSubClass; desc->dev_protocol = lu_desc.bDeviceProtocol; desc->max_packet_size = lu_desc.bMaxPacketSize0; - return SANE_STATUS_GOOD; } #else /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ { @@ -3193,4 +3013,5 @@ sanei_usb_get_descriptor( SANE_Int dn, return SANE_STATUS_UNSUPPORTED; } #endif /* not HAVE_LIBUSB_LEGACY && not HAVE_LIBUSB */ + return SANE_STATUS_GOOD; } diff --git a/sanei/sanei_wire.c b/sanei/sanei_wire.c index a43cc2e..32cd1a0 100644 --- a/sanei/sanei_wire.c +++ b/sanei/sanei_wire.c @@ -67,7 +67,7 @@ sanei_w_space (Wire * w, size_t howmuch) if (w->status != 0) { - DBG (1, "sanei_w_space: wire is in invalid state %d\n", + DBG (1, "sanei_w_space: wire is in invalid state %d\n", w->status); return; } @@ -81,7 +81,7 @@ sanei_w_space (Wire * w, size_t howmuch) case WIRE_ENCODE: nbytes = w->buffer.curr - w->buffer.start; w->buffer.curr = w->buffer.start; - DBG (4, "sanei_w_space: ENCODE: sending %lu bytes\n", + DBG (4, "sanei_w_space: ENCODE: sending %lu bytes\n", (u_long) nbytes); while (nbytes > 0) { @@ -184,7 +184,7 @@ sanei_w_array (Wire * w, SANE_Word * len_ptr, void **v, else DBG (1, "sanei_w_array: FREE: tried to free array but *len_ptr or *v " "was NULL\n"); - + DBG (4, "sanei_w_array: FREE: done\n"); return; } @@ -200,14 +200,14 @@ sanei_w_array (Wire * w, SANE_Word * len_ptr, void **v, return; } DBG (4, "sanei_w_array: array has %d elements\n", len); - + if (w->direction == WIRE_DECODE) { *len_ptr = len; if (len) { - if (((unsigned int) len) > MAX_MEM - || ((unsigned int) len * element_size) > MAX_MEM + if (((unsigned int) len) > MAX_MEM + || ((unsigned int) len * element_size) > MAX_MEM || (w->allocated_memory + len * element_size) > MAX_MEM) { DBG (0, "sanei_w_array: DECODE: maximum amount of allocated memory " @@ -291,7 +291,7 @@ sanei_w_ptr (Wire * w, void **v, WireCodecFunc w_value, size_t value_size) { DBG (0, "sanei_w_ptr: DECODE: maximum amount of allocated memory " "exceeded (limit: %u, new allocation: %lu, total: %lu bytes)\n", - MAX_MEM, (unsigned long)value_size, + MAX_MEM, (unsigned long)value_size, (unsigned long)(w->allocated_memory + value_size)); w->status = ENOMEM; return; @@ -581,8 +581,8 @@ flush (Wire * w) void sanei_w_set_dir (Wire * w, WireDirection dir) { - DBG (3, "sanei_w_set_dir: wire %d, old direction WIRE_%s\n", w->io.fd, - w->direction == WIRE_ENCODE ? "ENCODE" : + DBG (3, "sanei_w_set_dir: wire %d, old direction WIRE_%s\n", w->io.fd, + w->direction == WIRE_ENCODE ? "ENCODE" : (w->direction == WIRE_DECODE ? "DECODE" : "FREE")); if (w->direction == WIRE_DECODE && w->buffer.curr != w->buffer.end) DBG (1, "sanei_w_set_dir: WARNING: will delete %lu bytes from buffer\n", @@ -591,8 +591,8 @@ sanei_w_set_dir (Wire * w, WireDirection dir) w->direction = dir; DBG (4, "sanei_w_set_dir: direction changed\n"); flush (w); - DBG (3, "sanei_w_set_dir: wire %d, new direction WIRE_%s\n", w->io.fd, - dir == WIRE_ENCODE ? "ENCODE" : + DBG (3, "sanei_w_set_dir: wire %d, new direction WIRE_%s\n", w->io.fd, + dir == WIRE_ENCODE ? "ENCODE" : (dir == WIRE_DECODE ? "DECODE" : "FREE")); } @@ -656,13 +656,13 @@ void sanei_w_init (Wire * w, void (*codec_init_func) (Wire *)) { DBG_INIT (); - + DBG (3, "sanei_w_init: initializing\n"); w->status = 0; w->direction = WIRE_ENCODE; w->buffer.size = 8192; w->buffer.start = malloc (w->buffer.size); - + if (w->buffer.start == 0) { /* Malloc failed, so return an error. */ -- cgit v1.2.3