/*  sane - Scanner Access Now Easy.

    Copyright (C) 2019 Povilas Kanapickas <povilas@radix.lt>

    This file is part of the SANE package.

    This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License as
    published by the Free Software Foundation; either version 2 of the
    License, or (at your option) any later version.

    This program is distributed in the hope that it will be useful, but
    WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston,
    MA 02111-1307, USA.

    As a special exception, the authors of SANE give permission for
    additional uses of the libraries contained in this release of SANE.

    The exception is that, if you link a SANE library with other files
    to produce an executable, this does not by itself cause the
    resulting executable to be covered by the GNU General Public
    License.  Your use of that executable is in no way restricted on
    account of linking the SANE library code into it.

    This exception does not, however, invalidate any other reasons why
    the executable file might be covered by the GNU General Public
    License.

    If you submit changes to SANE to the maintainers to be included in
    a subsequent release, you agree by submitting the changes that
    those changes may be distributed with this exception intact.

    If you write modifications of your own for SANE, it is your choice
    whether to permit this exception to apply to your modifications.
    If you do not wish that, delete this exception notice.
*/

#define DEBUG_DECLARE_ONLY

#include "low.h"

namespace genesys {

StaticInit<std::vector<Genesys_Motor>> s_motors;

void genesys_init_motor_tables()
{
    s_motors.init();

    MotorProfile profile;

    Genesys_Motor motor;
    motor.id = MotorId::UMAX;
    motor.base_ydpi = 2400;
    motor.profiles.push_back({MotorSlope::create_from_steps(11000, 3000, 128), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(11000, 3000, 128), StepType::HALF, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::MD_5345; // MD5345/6228/6471
    motor.base_ydpi = 2400;
    motor.profiles.push_back({MotorSlope::create_from_steps(2000, 1375, 128), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(2000, 1375, 128), StepType::HALF, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::ST24;
    motor.base_ydpi = 2400;
    motor.profiles.push_back({MotorSlope::create_from_steps(2289, 2100, 128), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(2289, 2100, 128), StepType::HALF, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::HP3670;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(11000, 3000, 128), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(11000, 3000, 128), StepType::HALF, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::HP2400;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(11000, 3000, 128), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(11000, 3000, 128), StepType::HALF, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::HP2300;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(3200, 1200, 128), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(3200, 1200, 128), StepType::HALF, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_35;
    motor.base_ydpi = 1200;

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1300, 150), StepType::HALF, 0};
    profile.resolutions = { 75, 150, 200, 300, 600 };
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1300, 150), StepType::QUARTER, 0};
    profile.resolutions = { 1200, 2400 };
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1400, 150), StepType::FULL, 0};
    profile.resolutions = { 75, 150, 200, 300 };
    motor.fast_profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(6000, 3000, 100), StepType::FULL, 0};
    profile.resolutions = { 600, 1200, 2400 };
    motor.fast_profiles.push_back(profile);

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_60;
    motor.base_ydpi = 1200;

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1400, 150), StepType::HALF, 0};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1400, 150), StepType::FULL, 0};
    profile.resolutions = { 75, 150, 300 };
    motor.fast_profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(6000, 3000, 100), StepType::FULL, 0};
    profile.resolutions = { 600, 1200, 2400 };
    motor.fast_profiles.push_back(profile);

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_90;
    motor.base_ydpi = 1200;
    profile = {MotorSlope::create_from_steps(8000, 3000, 200), StepType::FULL, 0};
    profile.resolutions = { 150, 300 };
    motor.profiles.push_back(profile);

    profile = {MotorSlope::create_from_steps(7000, 3000, 200), StepType::HALF, 0};
    profile.resolutions = { 600, 1200 };
    motor.profiles.push_back(profile);

    profile = {MotorSlope::create_from_steps(7000, 3000, 200), StepType::QUARTER, 0};
    profile.resolutions = { 2400 };
    motor.profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::XP200;
    motor.base_ydpi = 600;
    motor.profiles.push_back({MotorSlope::create_from_steps(3500, 1300, 60), StepType::FULL, 0});
    motor.profiles.push_back({MotorSlope::create_from_steps(3500, 1300, 60), StepType::HALF, 0});
    motor.fast_profiles.push_back({MotorSlope::create_from_steps(3500, 1300, 60), StepType::FULL, 0});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::XP300;
    motor.base_ydpi = 300;
    // works best with GPIO10, GPIO14 off
    profile = MotorProfile{MotorSlope::create_from_steps(3700, 3700, 2), StepType::FULL, 0};
    profile.resolutions = {}; // used during fast moves
    motor.profiles.push_back(profile);

    // FIXME: this motor profile is useless
    profile = MotorProfile{MotorSlope::create_from_steps(11000, 11000, 2), StepType::HALF, 0};
    profile.resolutions = {75, 150, 300, 600};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3700, 3700, 2), StepType::FULL, 0};
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::DP665;
    motor.base_ydpi = 750;

    profile = MotorProfile{MotorSlope::create_from_steps(3000, 2500, 10), StepType::FULL, 0};
    profile.resolutions = {75, 150};
    motor.profiles.push_back(profile);

    // FIXME: this motor profile is useless
    profile = MotorProfile{MotorSlope::create_from_steps(11000, 11000, 2), StepType::HALF, 0};
    profile.resolutions = {300, 600, 1200};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3000, 2500, 10), StepType::FULL, 0};
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::ROADWARRIOR;
    motor.base_ydpi = 750;

    profile = MotorProfile{MotorSlope::create_from_steps(3000, 2600, 10), StepType::FULL, 0};
    profile.resolutions = {75, 150};
    motor.profiles.push_back(profile);

    // FIXME: this motor profile is useless
    profile = MotorProfile{MotorSlope::create_from_steps(11000, 11000, 2), StepType::HALF, 0};
    profile.resolutions = {300, 600, 1200};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3000, 2600, 10), StepType::FULL, 0};
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::DSMOBILE_600;
    motor.base_ydpi = 750;

    profile = MotorProfile{MotorSlope::create_from_steps(6666, 3700, 8), StepType::FULL, 0};
    profile.resolutions = {75, 150};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(6666, 3700, 8), StepType::HALF, 0};
    profile.resolutions = {300, 600, 1200};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(6666, 3700, 8), StepType::FULL, 0};
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_100;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 864, 255),
                              StepType::HALF, 1432});
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 864, 279),
                              StepType::QUARTER, 2712});
    motor.profiles.push_back({MotorSlope::create_from_steps(31680, 864, 247),
                              StepType::EIGHTH, 5280});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_200;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 864, 255),
                              StepType::HALF, 1432});
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 864, 279),
                              StepType::QUARTER, 2712});
    motor.profiles.push_back({MotorSlope::create_from_steps(31680, 864, 247),
                              StepType::EIGHTH, 5280});
    motor.profiles.push_back({MotorSlope::create_from_steps(31680, 864, 247),
                              StepType::EIGHTH, 10416});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_700;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 534, 255),
                              StepType::HALF, 1424});
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 534, 255),
                              StepType::HALF, 1504});
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 2022, 127),
                              StepType::HALF, 2696});
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 534, 255),
                              StepType::HALF, 2848});
    motor.profiles.push_back({MotorSlope::create_from_steps(46876, 15864, 2),
                              StepType::EIGHTH, 10576});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::KVSS080;
    motor.base_ydpi = 1200;
    motor.profiles.push_back({MotorSlope::create_from_steps(44444, 500, 489),
                              StepType::HALF, 8000});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::G4050;
    motor.base_ydpi = 2400;
    motor.profiles.push_back({MotorSlope::create_from_steps(7842, 320, 602),
                              StepType::HALF, 8016});
    motor.profiles.push_back({MotorSlope::create_from_steps(9422, 254, 1004),
                              StepType::HALF, 15624});
    motor.profiles.push_back({MotorSlope::create_from_steps(28032, 2238, 604),
                              StepType::HALF, 56064});
    motor.profiles.push_back({MotorSlope::create_from_steps(42752, 1706, 610),
                              StepType::QUARTER, 42752});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_4400F;
    motor.base_ydpi = 2400;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(28597 * 2, 727 * 2, 200);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 1;
    profile.resolutions = { 300, 600 };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(28597 * 2, 727 * 2, 200);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    profile.resolutions = { 1200, 2400, 4800, 9600 };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(28597 * 2, 279 * 2, 1000);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_5600F;
    motor.base_ydpi = 2400;

    // FIXME: real limit is 134, but for some reason the motor can't acquire that speed.
    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(2500 * 2, 134 * 2, 1000);
    profile.step_type = StepType::HALF;
    profile.motor_vref = 0;
    profile.resolutions = { 75, 150 };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(2500 * 2, 200 * 2, 1000);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    profile.resolutions = { 300, 600, 1200, 2400, 4800 };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(2500 * 2, 200 * 2, 1000);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_8400F;
    motor.base_ydpi = 1600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(20202 * 4, 333 * 4, 100);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    profile.resolutions = VALUE_FILTER_ANY;
    profile.scan_methods = { ScanMethod::FLATBED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(65535 * 4, 333 * 4, 100);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 2;
    profile.resolutions = VALUE_FILTER_ANY;
    profile.scan_methods = { ScanMethod::TRANSPARENCY, ScanMethod::TRANSPARENCY_INFRARED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(65535 * 4, 333 * 4, 200);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 2;
    profile.resolutions = VALUE_FILTER_ANY;
    profile.scan_methods = VALUE_FILTER_ANY;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_8600F;
    motor.base_ydpi = 2400;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 3;
    profile.resolutions = { 300, 600 };
    profile.scan_methods = { ScanMethod::FLATBED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 2;
    profile.resolutions = { 1200, 2400 };
    profile.scan_methods = { ScanMethod::FLATBED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 2;
    profile.resolutions = { 4800 };
    profile.scan_methods = { ScanMethod::FLATBED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 2;
    profile.resolutions = { 300, 600 };
    profile.scan_methods = { ScanMethod::TRANSPARENCY,
                             ScanMethod::TRANSPARENCY_INFRARED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 1;
    profile.resolutions = { 1200, 2400 };
    profile.scan_methods = { ScanMethod::TRANSPARENCY,
                             ScanMethod::TRANSPARENCY_INFRARED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    profile.resolutions = { 4800 };
    profile.scan_methods = { ScanMethod::TRANSPARENCY,
                             ScanMethod::TRANSPARENCY_INFRARED };
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(59240, 582, 1020);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 2;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_110;
    motor.base_ydpi = 4800;
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 335, 255),
                              StepType::FULL, 2768});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 335, 469),
                              StepType::HALF, 5360});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 2632, 3),
                              StepType::HALF, 10528});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 10432, 3),
                              StepType::QUARTER, 20864});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_120;
    motor.base_ydpi = 4800;
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 864, 127),
                              StepType::FULL, 4608});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 2010, 63),
                              StepType::HALF, 5360});
    motor.profiles.push_back({MotorSlope::create_from_steps(62464, 2632, 3),
                              StepType::QUARTER, 10528});
    motor.profiles.push_back({MotorSlope::create_from_steps(62592, 10432, 5),
                              StepType::QUARTER, 20864});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_210;
    motor.base_ydpi = 4800;
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 335, 255),
                              StepType::FULL, 2768});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 335, 469),
                              StepType::HALF, 5360});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 2632, 3),
                              StepType::HALF, 10528});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 10432, 4),
                              StepType::QUARTER, 20864});
    motor.profiles.push_back({MotorSlope::create_from_steps(62496, 10432, 4),
                              StepType::EIGHTH, 41536});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICPRO_3600;
    motor.base_ydpi = 1200;

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1300, 60), StepType::FULL, 0};
    profile.resolutions = {75, 100, 150, 200};
    motor.profiles.push_back(profile);

    // FIXME: this motor profile is almost useless
    profile = MotorProfile{MotorSlope::create_from_steps(3500, 3250, 60), StepType::HALF, 0};
    profile.resolutions = {300, 400, 600, 1200};
    motor.profiles.push_back(profile);

    profile = MotorProfile{MotorSlope::create_from_steps(3500, 1300, 60), StepType::FULL, 0};
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICFILM_7200;
    motor.base_ydpi = 3600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(20000 * 2, 600 * 2, 200);
    profile.step_type = StepType::HALF;
    profile.motor_vref = 0;
    motor.profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICFILM_7200I;
    motor.base_ydpi = 3600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(34722 * 2, 454 * 2, 40);
    profile.step_type = StepType::HALF;
    profile.motor_vref = 3;
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(34722 * 2, 454 * 2, 40);
    profile.step_type = StepType::HALF;
    profile.motor_vref = 0;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICFILM_7300;
    motor.base_ydpi = 3600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(56818 * 4, 454 * 4, 30);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 3;
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(56818 * 4, 454 * 4, 30);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICFILM_7400;
    motor.base_ydpi = 3600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(64102 * 4, 400 * 4, 30);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 3;
    motor.profiles.push_back(profile);
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICFILM_7500I;
    motor.base_ydpi = 3600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(56818 * 4, 454 * 4, 30);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 3;
    motor.profiles.push_back(std::move(profile));

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(56818 * 4, 454 * 4, 30);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 0;
    motor.fast_profiles.push_back(std::move(profile));

    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICFILM_8200I;
    motor.base_ydpi = 3600;

    profile = MotorProfile();
    profile.slope = MotorSlope::create_from_steps(64102 * 4, 400 * 4, 100);
    profile.step_type = StepType::QUARTER;
    profile.motor_vref = 3;
    motor.profiles.push_back(profile);
    motor.fast_profiles.push_back(profile);
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::IMG101;
    motor.base_ydpi = 600;
    motor.profiles.push_back({MotorSlope::create_from_steps(22000, 1000, 1017),
                              StepType::HALF, 11000});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::PLUSTEK_OPTICBOOK_3800;
    motor.base_ydpi = 600;
    motor.profiles.push_back({MotorSlope::create_from_steps(22000, 1000, 1017),
                              StepType::HALF, 11000});
    s_motors->push_back(std::move(motor));


    motor = Genesys_Motor();
    motor.id = MotorId::CANON_LIDE_80;
    motor.base_ydpi = 2400;
    motor.profiles.push_back({MotorSlope::create_from_steps(9560, 1912, 31), StepType::FULL, 0});
    s_motors->push_back(std::move(motor));
}

} // namespace genesys