/* sane - Scanner Access Now Easy.

   This file (C) 1997 Ingo Schneider

   This file is part of the SANE package.

   SANE is free software; you can redistribute it and/or modify it under
   the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 2 of the License, or (at your
   option) any later version.

   SANE is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
   for more details.

   You should have received a copy of the GNU General Public License
   along with sane; see the file COPYING.  If not, write to the Free
   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

   This file implements a SANE backend for Siemens 9036 flatbed scanners.  */

#include "../include/sane/config.h"

#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/types.h>

#ifndef PATH_MAX
# define PATH_MAX	1024
#endif

#include "../include/sane/sane.h"
#include "../include/sane/sanei.h"
#include "../include/sane/sanei_config.h"
#include "../include/sane/saneopts.h"
#include "../include/sane/sanei_scsi.h"
#include "s9036.h"

#define BACKEND_NAME	s9036
#include "../include/sane/sanei_backend.h"


#undef Byte
#define Byte SANE_Byte

static int num_devices;
static S9036_Device *s9036_devices;


/* sets loc_s bytes long value at offset loc in scsi command to value size  */
static void 
set_size (Byte * loc, int loc_s, size_t size)
{
  int i;

  for (i = 0; i < loc_s; i++)
    {
      loc[loc_s - i - 1] = (size >> (i * 8)) & 0xff;
    }
}

static long 
reserve_unit (int fd)
{
  const Byte scsi_reserve[] =
  {
    0x16, 0x00, 0x00, 0x00, 0x00, 0x00
  };
  DBG (3, "reserve_unit()\n");
  return sanei_scsi_cmd (fd, scsi_reserve, sizeof (scsi_reserve), 0, 0);
}

static long 
release_unit (int fd)
{
  const Byte scsi_release[] =
  {
    0x17, 0x00, 0x00, 0x00, 0x00, 0x00
  };
  DBG (3, "release_unit()\n");
  return sanei_scsi_cmd (fd, scsi_release, sizeof (scsi_release), 0, 0);
}

static SANE_Status
test_ready (int fd)
{
  static const Byte scsi_test_ready[] =
  {
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  };

  SANE_Status status;
  int try;

  for (try = 0; try < 1000; ++try)
    {
      DBG (3, "test_ready: sending TEST_UNIT_READY\n");
      status = sanei_scsi_cmd (fd, scsi_test_ready, sizeof (scsi_test_ready),
			       0, 0);

      switch (status)
	{
	case SANE_STATUS_DEVICE_BUSY:
	  usleep (100000);	/* retry after 100ms */
	  break;

	case SANE_STATUS_GOOD:
	  return status;

	default:
	  DBG (1, "test_ready: test unit ready failed (%s)\n",
	       sane_strstatus (status));
	  return status;
	}
    }

  DBG (1, "test_ready: timed out after %d attempts\n", try);
  return SANE_STATUS_IO_ERROR;
}

static SANE_Status
sense_handler (int scsi_fd, u_char *result, void *arg)
{
  scsi_fd = scsi_fd;
  arg = arg; /* silence compilation warnings */

  if (result[0])
    {
      DBG (0, "sense_handler() : sense code = %02x\n", result[0]);
      return SANE_STATUS_IO_ERROR;
    }
  else
    {
      return SANE_STATUS_GOOD;
    }
}

static SANE_Status
stop_scan (int fd)
{
  fd = fd; /* silence compilation warnings */

  /* XXX don't know how to stop the scanner. To be tested ! */
#if 0
  const Byte scsi_rewind[] =
  {
    0x01, 0x00, 0x00, 0x00, 0x00, 0x00
  };
  DBG (1, "Trying to stop scanner...\n");
  return sanei_scsi_cmd (fd, scsi_rewind, sizeof (scsi_rewind), 0, 0);
#else
  return SANE_STATUS_GOOD;
#endif
}


static SANE_Status
start_scan (int fd, SANE_Bool cont)
{
  struct
  {
    /* Command */
    Byte cmd;
    Byte lun;
    Byte res[2];
    Byte tr_len;
    Byte ctrl;

    /* Data */
    Byte wid;
  }
  scsi_start_scan;

  memset (&scsi_start_scan, 0, sizeof (scsi_start_scan));
  scsi_start_scan.cmd = 0x1b;
  scsi_start_scan.tr_len = 1;
  scsi_start_scan.wid = 0;
  scsi_start_scan.ctrl = (cont == SANE_TRUE) ? 0x80 : 0x00;

  DBG (1, "Starting scanner ...\n");
  return sanei_scsi_cmd (fd, &scsi_start_scan, sizeof (scsi_start_scan), 0, 0);
}

static void
wait_ready (int fd)
{
# define WAIT_READY_READ_SIZE 4
  const Byte scsi_read[] =
  {
    0x28, 0x00,				/* opcode, lun */
    0x80,				/* data type 80 == read time left */
    0x00, 0x00, 0x00,			/* reserved */
    0x00, 0x00, WAIT_READY_READ_SIZE,	/* transfer length */
    0x00,				/* control byte */
  };

  Byte result[WAIT_READY_READ_SIZE];
  size_t size = WAIT_READY_READ_SIZE;
  SANE_Status status;

  while (1)
    {
      status = sanei_scsi_cmd (fd, scsi_read, sizeof (scsi_read),
			       result, &size);

      if (status != SANE_STATUS_GOOD || size != WAIT_READY_READ_SIZE)
	{
	  /*
	     Command failed, the assembler code of the windows scan library
	     ignores this condition, and so do I
	   */
	  break;
	}
      else
	{
	  /* left is the amount of seconds left till the scanner is
             ready * 100 */
	  int left = result[2] * 256 + result[3];

	  DBG (1, "wait_ready() : %d left...\n", left);

	  if (!left)
	    break;
	  /* We delay only for half the given time */
	  else if (left < 200)
	    usleep (left * 5000);
	  else
	    sleep (left / 200);
	}
    }

  return;
}

static SANE_Status
get_read_sizes (int fd, int *lines_available, int *bpl, int *total_lines)
{
# define GET_READ_SIZES_READ_SIZE 24

  const Byte scsi_read[] =
  {
    0x28, 0x00,				/* opcode, lun */
    0x81,				/* data type 81 == read time left */
    0x00, 0x00, 0x00,				/* reserved */
    0x00, 0x00, GET_READ_SIZES_READ_SIZE,	/* transfer length */
    0x00,				/* control byte */
  };

  Byte result[GET_READ_SIZES_READ_SIZE];
  size_t size = GET_READ_SIZES_READ_SIZE;
  SANE_Status status;

  status = sanei_scsi_cmd (fd, scsi_read, sizeof (scsi_read), result, &size);

  if (status != SANE_STATUS_GOOD || size != GET_READ_SIZES_READ_SIZE)
    {
      /* Command failed */
      return SANE_STATUS_IO_ERROR;
    }
  else
    {
      *lines_available = result[14] * 256 + result[15];
      *bpl = result[12] * 256 + result[13];
      if (total_lines)
	*total_lines = result[10] * 256 + result[11];
    }

  DBG (1, "get_read_sizes() : %d of %d, %d\n",
       *lines_available, total_lines ? *total_lines : -1, *bpl);

  return SANE_STATUS_GOOD;
}

static SANE_Status
set_window (S9036_Scanner * s)
/* This function sets and sends the window for scanning */
{
  double pixels_per_mm = (double) s->val[OPT_RESOLUTION] / MM_PER_INCH;

  SANE_Bool auto_bright = !(s->opt[OPT_BRIGHT_ADJUST].cap & SANE_CAP_INACTIVE);
  SANE_Bool auto_contr = !(s->opt[OPT_CONTR_ADJUST].cap & SANE_CAP_INACTIVE);

  /* ranges down 255 (dark) down to 1(bright) */
  int brightness = auto_bright ? 0 : (SANE_UNFIX (s->val[OPT_BRIGHTNESS])
				      * -1.27 + 128.5);
  /* ranges from 1 (little contrast) up to 255 (much contrast) */
  int contrast = auto_contr ? 0 : (SANE_UNFIX (s->val[OPT_CONTRAST])
				   * 1.27 + 128.5);

  /* ranges from 40 (dark) down to 0 (bright) */
  int bright_adjust = auto_bright ? 20 - s->val[OPT_BRIGHT_ADJUST] : 0;
  /* ranges from 20 (little contrast) down to -20 = 235 (much contrast) */
  int contr_adjust = auto_contr ? (256 - s->val[OPT_CONTR_ADJUST]) % 256 : 0;

  /* Warning ! The following structur SEEMS to be an valid SCSI-2
     SET_WINDOW command.  But e.g. the limits for the window are only
     2 Bytes instead of 4.  The scanner was built at about 1990, so
     SCSI-2 wasn't available for development...
   */

  struct
    {
      Byte cmd;
      Byte lun;
      Byte re1[4];
      Byte tr_len[3];
      Byte ctrl;

      Byte re2[6];
      Byte wd_len[2];

      struct
	{
	  Byte wid;
	  Byte autobit;
	  Byte x_axis_res[2];
	  Byte y_axis_res[2];

	  Byte x_axis_ul[2];
	  Byte y_axis_ul[2];

	  Byte wwidth[2];
	  Byte wlength[2];

	  Byte contrast;
	  Byte threshold;
	  Byte brightness;

	  Byte image_comp;
	  Byte bpp;

	  Byte ht_pattern;
	  Byte rif_padding;
	  Byte three;

	  Byte null1[2];
	  Byte null2[8];

	  Byte null_eins;
	  Byte eins_null;

	  Byte contr_adjust;
	  Byte bright_adjust;

	  Byte null3;

	}
      wd;

    }
  cmd;

  DBG (3,
       "Setting parameters: bpp %d, res %d, bri %d, con %d, bad %d, cad %d\n",
       s->val[OPT_DEPTH], s->val[OPT_RESOLUTION],
       brightness, contrast, bright_adjust, contr_adjust);

  memset (&cmd, 0, sizeof (cmd));

  /* Commands and sizes.  Original comment in German: Kommando und Groessen. */
  cmd.cmd = 0x24;
  set_size (cmd.tr_len, 3, 37 + 8);
  set_size (cmd.wd_len, 2, 37);

  /* Resolution.  Original comment in German: Aufloesung */
  set_size (cmd.wd.x_axis_res, 2, s->val[OPT_RESOLUTION]);
  set_size (cmd.wd.y_axis_res, 2, s->val[OPT_RESOLUTION]);

  /* Scan window position/size.  Original comment in German:
     Fensterposition / Groesse */
  set_size (cmd.wd.x_axis_ul, 2,
	    SANE_UNFIX (s->val[OPT_TL_X]) * pixels_per_mm + 0.5);
  set_size (cmd.wd.y_axis_ul, 2,
	    SANE_UNFIX (s->val[OPT_TL_Y]) * pixels_per_mm + 0.5);
  set_size (cmd.wd.wwidth, 2, SANE_UNFIX (s->val[OPT_BR_X] - s->val[OPT_TL_X])
	    * pixels_per_mm + 0.5);
  set_size (cmd.wd.wlength, 2, SANE_UNFIX (s->val[OPT_BR_Y] - s->val[OPT_TL_Y])
	    * pixels_per_mm + 0.5);

  cmd.wd.contrast = contrast;
  cmd.wd.threshold = 0x00;
  cmd.wd.brightness = brightness;

  cmd.wd.image_comp = (s->val[OPT_DEPTH] == 1) ? 0 : 2;
  cmd.wd.bpp = s->val[OPT_DEPTH];

  cmd.wd.ht_pattern = 0;
  cmd.wd.rif_padding = 0x00;
  cmd.wd.three = 3;

  cmd.wd.null_eins = (s->val[OPT_DEPTH] == 1) ? 0 : 1;
  cmd.wd.eins_null = (s->val[OPT_DEPTH] == 1) ? 1 : 0;

  cmd.wd.contr_adjust = contr_adjust;
  cmd.wd.bright_adjust = bright_adjust;

  return sanei_scsi_cmd (s->fd, &cmd, sizeof (cmd), 0, 0);
}

/* Tell scanner to scan more data.  Original comment in German:
   Fordert Scanner auf, weiter zu scannen... */
static SANE_Status
request_more_data (S9036_Scanner * s)
{
  SANE_Status status;
  int lines_available;
  int bytes_per_line;

  status = start_scan (s->fd, SANE_TRUE);
  if (status != SANE_STATUS_GOOD)
    return status;

  wait_ready (s->fd);

  status = get_read_sizes (s->fd, &lines_available, &bytes_per_line, 0);

  if (!lines_available || bytes_per_line != s->params.bytes_per_line)
    {
      return SANE_STATUS_INVAL;
    }

  if (s->lines_read + lines_available > s->params.lines)
    return SANE_STATUS_INVAL;

  s->lines_in_scanner = lines_available;

  return SANE_STATUS_GOOD;
}

/* May only be called when there is at least one row of data to
   be read.

   Original comment in German: Darf nur aufgerufen werden, wenn
   wirklich noch Zeilen zu scannen/lesen sind !  */
static SANE_Status
read_more_data (S9036_Scanner * s)
{

  static Byte cmd[] =
  {
    0x28, 0x00,			/* opcode, lun */
    0x00,			/* data type 80 == read time left */
    0x00, 0x00, 0x00,		/* reserved */
    0x00, 0x00, 0x00,		/* transfer length */
    0x00,			/* control byte */
  };

  SANE_Status status;
  size_t size;
  int lines_read;
  int bpl = s->params.bytes_per_line;
  unsigned int i;

  if (s->lines_in_scanner == 0)
    {
      /* No lines in scanner ? scan some more */
      status = request_more_data (s);

      if (status != SANE_STATUS_GOOD)
	return status;

    }

  /* We try this 3 times */
  while (1)
    {

      /* Request as much lines as would fit into the buffer ... */
      lines_read = s->bufsize / bpl;

      /* buffer is too small for one line: we can't handle this */
      if (!lines_read)
	return SANE_STATUS_INVAL;

      /* We only request as many lines as there are already scanned */
      if (lines_read > s->lines_in_scanner)
	lines_read = s->lines_in_scanner;

      set_size (&cmd[6], 3, lines_read);
      size = lines_read * s->params.bytes_per_line;

      DBG (1, "Requesting %d lines, in scanner: %d, total: %d\n", lines_read,
	   s->lines_in_scanner, s->params.lines);

      status = sanei_scsi_cmd (s->fd, cmd, sizeof (cmd), s->buffer, &size);

      if (status != SANE_STATUS_GOOD)
	{
	  if (s->bufsize > 4096)
	    {
	      DBG (1, "sanei_scsi_cmd(): using 4k buffer\n");
	      s->bufsize = 4096;
	      continue;
	    }

	  DBG (1, "sanei_scsi_cmd() = %d\n", status);
	  return SANE_STATUS_IO_ERROR;
	}

      if (size != (unsigned int) lines_read * s->params.bytes_per_line)
	{
	  DBG (1, "sanei_scsi_cmd(): got %lu bytes, expected %d\n",
	       (u_long) size, lines_read * s->params.bytes_per_line);
	  return SANE_STATUS_INVAL;
	}

      DBG (1, "Got %lu bytes\n", (u_long) size);
      break;
    }


  /* Reverse: */
  if (s->params.depth != 1)
    for (i = 0; i < size; i++)
      s->buffer[i] = (255 - s->buffer[i]);

  s->in_buffer += size;
  s->lines_in_scanner -= lines_read;
  s->lines_read += lines_read;

  return SANE_STATUS_GOOD;
}


static SANE_Status
attach (const char *devname, S9036_Device ** devp)
{
#define ATTACH_SCSI_INQ_LEN 55
  const Byte scsi_inquiry[] =
  {
    0x12, 0x00, 0x00, 0x00, ATTACH_SCSI_INQ_LEN, 0x00
  };
  Byte result[ATTACH_SCSI_INQ_LEN];

  int fd;
  S9036_Device *dev;
  SANE_Status status;
  size_t size;
  int i;

  for (dev = s9036_devices; dev; dev = dev->next)
    if (strcmp (dev->sane.name, devname) == 0)
      {
	if (devp)
	  *devp = dev;
	return SANE_STATUS_GOOD;
      }

  DBG (3, "attach: opening %s\n", devname);
  status = sanei_scsi_open (devname, &fd, sense_handler, 0);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (1, "attach: open failed (%s)\n", sane_strstatus (status));
      return SANE_STATUS_INVAL;
    }

  DBG (3, "attach: sending INQUIRY\n");
  size = sizeof (result);
  status = sanei_scsi_cmd (fd, scsi_inquiry, sizeof (scsi_inquiry),
			   result, &size);
  if (status != SANE_STATUS_GOOD || size != ATTACH_SCSI_INQ_LEN)
    {
      DBG (1, "attach: inquiry failed (%s)\n", sane_strstatus (status));
      sanei_scsi_close (fd);
      return status;
    }

  status = test_ready (fd);
  sanei_scsi_close (fd);
  if (status != SANE_STATUS_GOOD)
    return status;

  /* The structure send by the scanner after inquiry is not SCSI-2
     compatible.  The standard manufacturer/model fields are no ASCII
     strings, but ?  At offset 36 my SIEMENS scanner identifies as an
     AGFA one ?!   */

  if (result[0] != 6 || strncmp ((char *)result + 36, "AGFA03", 6))
    {
      DBG (1, "attach: device doesn't look like a Siemens 9036 scanner\n");
      return SANE_STATUS_INVAL;
    }

  DBG (3, "Inquiry data:\n");
  for (i = 5; i < 55; i += 10)
    DBG (3, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
      result[i], result[i + 1], result[i + 2], result[i + 3], result[i + 4],
	 result[i + 5], result[i + 6], result[i + 7], result[i + 8],
	 result[i + 9]);

  dev = malloc (sizeof (*dev));

  if (!dev)
    return SANE_STATUS_NO_MEM;

  memset (dev, 0, sizeof (*dev));

  dev->sane.name = strdup (devname);
  dev->sane.vendor = "Siemens";
  dev->sane.model = "9036";
  dev->sane.type = "flatbed scanner";

  dev->handle = 0;

  DBG (3, "attach: found S9036 scanner model\n");

  ++num_devices;
  dev->next = s9036_devices;
  s9036_devices = dev;

  if (devp)
    *devp = dev;

  return SANE_STATUS_GOOD;
}

static SANE_Status
do_cancel (S9036_Scanner * s)
{
  s->scanning = SANE_FALSE;

  if (s->fd >= 0)
    {
      stop_scan (s->fd);
      release_unit (s->fd);
      sanei_scsi_close (s->fd);
      s->fd = -1;
    }

  if (s->buffer)
    {
      free (s->buffer);
      s->buffer = 0;
    }

  return SANE_STATUS_CANCELLED;
}


static SANE_Status
init_options (S9036_Scanner * s)
{
  int i;

  /* Hardware Limitations: must be static ! */
  static const SANE_Int depth_list[] =
  {2, 1, 8};

  static const SANE_Int dpi_list[] =
  {8, 100, 200, 300, 400, 500, 600, 700, 800};

  static const SANE_Range percentage_range =
  {
    -100 << SANE_FIXED_SCALE_SHIFT,	/* minimum */
    100 << SANE_FIXED_SCALE_SHIFT,	/* maximum */
    1 << SANE_FIXED_SCALE_SHIFT	/* quantization */
  };

  static const SANE_Range automatic_adjust_range =
  {-20, 20, 1};

  static const SANE_Range x_range =
  {0, SANE_FIX (8.27 * MM_PER_INCH), 0};
  static const SANE_Range y_range =
  {0, SANE_FIX (12.72 * MM_PER_INCH), 0};

  /* ------ */

  memset (s->opt, 0, sizeof (s->opt));
  memset (s->val, 0, sizeof (s->val));

  for (i = 0; i < NUM_OPTIONS; ++i)
    {
      s->opt[i].size = sizeof (SANE_Word);
      s->opt[i].cap = SANE_CAP_SOFT_SELECT | SANE_CAP_SOFT_DETECT;
    }

  s->opt[OPT_NUM_OPTS].title = SANE_TITLE_NUM_OPTIONS;
  s->opt[OPT_NUM_OPTS].desc = SANE_DESC_NUM_OPTIONS;
  s->opt[OPT_NUM_OPTS].type = SANE_TYPE_INT;
  s->opt[OPT_NUM_OPTS].cap = SANE_CAP_SOFT_DETECT;
  s->val[OPT_NUM_OPTS] = NUM_OPTIONS;

  /* "Mode" group: */

  s->opt[OPT_MODE_GROUP].title = "Scan Mode";
  s->opt[OPT_MODE_GROUP].desc = "";
  s->opt[OPT_MODE_GROUP].type = SANE_TYPE_GROUP;
  s->opt[OPT_MODE_GROUP].cap = 0;
  s->opt[OPT_MODE_GROUP].constraint_type = SANE_CONSTRAINT_NONE;

  /* depth */
  s->opt[OPT_DEPTH].name = SANE_NAME_BIT_DEPTH;
  s->opt[OPT_DEPTH].title = SANE_TITLE_BIT_DEPTH;
  s->opt[OPT_DEPTH].desc = SANE_DESC_BIT_DEPTH;
  s->opt[OPT_DEPTH].type = SANE_TYPE_INT;
  s->opt[OPT_DEPTH].unit = SANE_UNIT_BIT;
  s->opt[OPT_DEPTH].constraint_type = SANE_CONSTRAINT_WORD_LIST;
  s->opt[OPT_DEPTH].constraint.word_list = depth_list;
  s->val[OPT_DEPTH] = 1;

  /* resolution */
  s->opt[OPT_RESOLUTION].name = SANE_NAME_SCAN_RESOLUTION;
  s->opt[OPT_RESOLUTION].title = SANE_TITLE_SCAN_RESOLUTION;
  s->opt[OPT_RESOLUTION].desc = SANE_DESC_SCAN_RESOLUTION;
  s->opt[OPT_RESOLUTION].type = SANE_TYPE_INT;
  s->opt[OPT_RESOLUTION].unit = SANE_UNIT_DPI;
  s->opt[OPT_RESOLUTION].constraint_type = SANE_CONSTRAINT_WORD_LIST;
  s->opt[OPT_RESOLUTION].constraint.word_list = dpi_list;
  s->val[OPT_RESOLUTION] = 100;

  /* "Geometry" group: */
  s->opt[OPT_GEOMETRY_GROUP].title = "Geometry";
  s->opt[OPT_GEOMETRY_GROUP].desc = "";
  s->opt[OPT_GEOMETRY_GROUP].type = SANE_TYPE_GROUP;
  s->opt[OPT_GEOMETRY_GROUP].cap = SANE_CAP_ADVANCED;
  s->opt[OPT_GEOMETRY_GROUP].constraint_type = SANE_CONSTRAINT_NONE;

  /* top-left x */
  s->opt[OPT_TL_X].name = SANE_NAME_SCAN_TL_X;
  s->opt[OPT_TL_X].title = SANE_TITLE_SCAN_TL_X;
  s->opt[OPT_TL_X].desc = SANE_DESC_SCAN_TL_X;
  s->opt[OPT_TL_X].type = SANE_TYPE_FIXED;
  s->opt[OPT_TL_X].unit = SANE_UNIT_MM;
  s->opt[OPT_TL_X].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_TL_X].constraint.range = &x_range;
  s->val[OPT_TL_X] = 0;

  /* top-left y */
  s->opt[OPT_TL_Y].name = SANE_NAME_SCAN_TL_Y;
  s->opt[OPT_TL_Y].title = SANE_TITLE_SCAN_TL_Y;
  s->opt[OPT_TL_Y].desc = SANE_DESC_SCAN_TL_Y;
  s->opt[OPT_TL_Y].type = SANE_TYPE_FIXED;
  s->opt[OPT_TL_Y].unit = SANE_UNIT_MM;
  s->opt[OPT_TL_Y].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_TL_Y].constraint.range = &y_range;
  s->val[OPT_TL_Y] = 0;

  /* bottom-right x */
  s->opt[OPT_BR_X].name = SANE_NAME_SCAN_BR_X;
  s->opt[OPT_BR_X].title = SANE_TITLE_SCAN_BR_X;
  s->opt[OPT_BR_X].desc = SANE_DESC_SCAN_BR_X;
  s->opt[OPT_BR_X].type = SANE_TYPE_FIXED;
  s->opt[OPT_BR_X].unit = SANE_UNIT_MM;
  s->opt[OPT_BR_X].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_BR_X].constraint.range = &x_range;
  s->val[OPT_BR_X] = x_range.max;

  /* bottom-right y */
  s->opt[OPT_BR_Y].name = SANE_NAME_SCAN_BR_Y;
  s->opt[OPT_BR_Y].title = SANE_TITLE_SCAN_BR_Y;
  s->opt[OPT_BR_Y].desc = SANE_DESC_SCAN_BR_Y;
  s->opt[OPT_BR_Y].type = SANE_TYPE_FIXED;
  s->opt[OPT_BR_Y].unit = SANE_UNIT_MM;
  s->opt[OPT_BR_Y].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_BR_Y].constraint.range = &y_range;
  s->val[OPT_BR_Y] = y_range.max;

  /* "Enhancement" group: */
  s->opt[OPT_ENHANCEMENT_GROUP].title = "Enhancement";
  s->opt[OPT_ENHANCEMENT_GROUP].desc = "";
  s->opt[OPT_ENHANCEMENT_GROUP].type = SANE_TYPE_GROUP;
  s->opt[OPT_ENHANCEMENT_GROUP].cap = 0;
  s->opt[OPT_ENHANCEMENT_GROUP].constraint_type = SANE_CONSTRAINT_NONE;

  /* brightness */
  s->opt[OPT_BRIGHTNESS].name = SANE_NAME_BRIGHTNESS;
  s->opt[OPT_BRIGHTNESS].title = SANE_TITLE_BRIGHTNESS;
  s->opt[OPT_BRIGHTNESS].desc = SANE_DESC_BRIGHTNESS;
  s->opt[OPT_BRIGHTNESS].type = SANE_TYPE_FIXED;
  s->opt[OPT_BRIGHTNESS].cap |= SANE_CAP_AUTOMATIC;
  s->opt[OPT_BRIGHTNESS].unit = SANE_UNIT_PERCENT;
  s->opt[OPT_BRIGHTNESS].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_BRIGHTNESS].constraint.range = &percentage_range;
  s->val[OPT_BRIGHTNESS] = 0;

  /* contrast */
  s->opt[OPT_CONTRAST].name = SANE_NAME_CONTRAST;
  s->opt[OPT_CONTRAST].title = SANE_TITLE_CONTRAST;
  s->opt[OPT_CONTRAST].desc = SANE_DESC_CONTRAST;
  s->opt[OPT_CONTRAST].type = SANE_TYPE_FIXED;
  s->opt[OPT_CONTRAST].cap |= SANE_CAP_AUTOMATIC;
  s->opt[OPT_CONTRAST].unit = SANE_UNIT_PERCENT;
  s->opt[OPT_CONTRAST].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_CONTRAST].constraint.range = &percentage_range;
  s->val[OPT_CONTRAST] = 0;

  /* brightness automatic correct */
  s->opt[OPT_BRIGHT_ADJUST].name = "adjust-bright";
  s->opt[OPT_BRIGHT_ADJUST].title = "Automatic brightness adjust";
  s->opt[OPT_BRIGHT_ADJUST].desc = "Controls the automatic brightness of the "
    "acquired image. This option is active for automatic brightness only.";
  s->opt[OPT_BRIGHT_ADJUST].type = SANE_TYPE_INT;
  s->opt[OPT_BRIGHT_ADJUST].cap |= SANE_CAP_INACTIVE;
  s->opt[OPT_BRIGHT_ADJUST].unit = SANE_UNIT_NONE;
  s->opt[OPT_BRIGHT_ADJUST].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_BRIGHT_ADJUST].constraint.range = &automatic_adjust_range;
  s->val[OPT_BRIGHT_ADJUST] = 0;

  /* contrast automatic correct */
  s->opt[OPT_CONTR_ADJUST].name = "adjust-contr";
  s->opt[OPT_CONTR_ADJUST].title = "Automatic contrast adjust";
  s->opt[OPT_CONTR_ADJUST].desc = "Controls the automatic contrast of the "
    " acquired image. This option is active for automatic contrast only.";
  s->opt[OPT_CONTR_ADJUST].type = SANE_TYPE_INT;
  s->opt[OPT_CONTR_ADJUST].cap |= SANE_CAP_INACTIVE;
  s->opt[OPT_CONTR_ADJUST].unit = SANE_UNIT_NONE;
  s->opt[OPT_CONTR_ADJUST].constraint_type = SANE_CONSTRAINT_RANGE;
  s->opt[OPT_CONTR_ADJUST].constraint.range = &automatic_adjust_range;
  s->val[OPT_CONTR_ADJUST] = 0;

  return SANE_STATUS_GOOD;
}

static SANE_Status
attach_one (const char *dev)
{
  attach (dev, 0);
  return SANE_STATUS_GOOD;
}

SANE_Status
sane_init (SANE_Int * version_code, SANE_Auth_Callback authorize)
{
  char dev_name[PATH_MAX];
  size_t len;
  FILE *fp;

  authorize = authorize; /* silence compilation warnings */

  DBG_INIT ();

  if (version_code)
    *version_code = SANE_VERSION_CODE (SANE_CURRENT_MAJOR, V_MINOR, 0);

  fp = sanei_config_open ("s9036.conf");
  if (!fp)
    {
      /* default to /dev/scanner instead of insisting on config file */
      attach ("/dev/scanner", 0);
      return SANE_STATUS_GOOD;
    }

  while (sanei_config_read (dev_name, sizeof (dev_name), fp))
    {
      if (dev_name[0] == '#')	/* ignore line comments */
	continue;
      len = strlen (dev_name);

      if (!len)
	continue;		/* ignore empty lines */

      sanei_config_attach_matching_devices (dev_name, attach_one);
    }
  fclose (fp);
  return SANE_STATUS_GOOD;
}

void
sane_exit (void)
{
  S9036_Device *dev, *next;

  for (dev = s9036_devices; dev; dev = next)
    {
      next = dev->next;
      if (dev->handle)
	sane_close (dev->handle);
      free (dev);
    }
}

SANE_Status
sane_get_devices (const SANE_Device *** device_list, SANE_Bool local_only)
{
  static const SANE_Device **devlist = 0;
  S9036_Device *dev;
  int i;
  
  local_only = local_only; /* silence compilation warnings */

  if (devlist)
    free (devlist);

  devlist = malloc ((num_devices + 1) * sizeof (devlist[0]));
  if (!devlist)
    return SANE_STATUS_NO_MEM;

  for (dev = s9036_devices, i = 0; i < num_devices; dev = dev->next)
    devlist[i++] = &dev->sane;
  devlist[i++] = 0;

  *device_list = devlist;
  return SANE_STATUS_GOOD;
}

SANE_Status
sane_open (SANE_String_Const devicename, SANE_Handle * handle)
{
  S9036_Device *dev;
  SANE_Status status;
  S9036_Scanner *s;

  if (devicename[0])
    {
      status = attach (devicename, &dev);
      if (status != SANE_STATUS_GOOD)
	return status;
    }
  else
    {
      /* empty devicname -> use first device */
      dev = s9036_devices;
    }

  if (!dev)
    return SANE_STATUS_INVAL;

  if (dev->handle)
    return SANE_STATUS_DEVICE_BUSY;

  s = malloc (sizeof (*s));
  if (!s)
    return SANE_STATUS_NO_MEM;

  memset (s, 0, sizeof (*s));
  s->scanning = SANE_FALSE;
  s->fd = -1;
  s->hw = dev;
  s->hw->handle = s;

  init_options (s);

  *handle = s;
  return SANE_STATUS_GOOD;
}

void
sane_close (SANE_Handle handle)
{
  S9036_Scanner *s = handle;

  if (s->scanning)
    do_cancel (handle);

  s->hw->handle = 0;

  free (handle);
}

const SANE_Option_Descriptor *
sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
{
  S9036_Scanner *s = handle;

  if ((unsigned) option >= NUM_OPTIONS)
    return 0;
  return s->opt + option;
}

SANE_Status
sane_control_option (SANE_Handle handle, SANE_Int option,
		     SANE_Action action, void *val, SANE_Int * info)
{
  S9036_Scanner *s = handle;
  SANE_Status status;

  if (info)
    *info = 0;

  if (s->scanning)
    return SANE_STATUS_DEVICE_BUSY;

  if (option >= NUM_OPTIONS || !SANE_OPTION_IS_ACTIVE (s->opt[option].cap))
    return SANE_STATUS_UNSUPPORTED;

  if (action == SANE_ACTION_GET_VALUE)
    {

      switch (option)
	{
	case OPT_DEPTH:
	case OPT_RESOLUTION:
	case OPT_TL_X:
	case OPT_TL_Y:
	case OPT_BR_X:
	case OPT_BR_Y:
	case OPT_NUM_OPTS:
	case OPT_BRIGHTNESS:
	case OPT_CONTRAST:
	case OPT_BRIGHT_ADJUST:
	case OPT_CONTR_ADJUST:
	  *(SANE_Word *) val = s->val[option];
	  break;
	default:
	  return SANE_STATUS_UNSUPPORTED;
	}

    }
  else if (action == SANE_ACTION_SET_VALUE)
    {

      if (!SANE_OPTION_IS_SETTABLE (s->opt[option].cap))
	return SANE_STATUS_UNSUPPORTED;

      status = sanei_constrain_value (s->opt + option, val, info);
      if (status != SANE_STATUS_GOOD)
	return status;

      switch (option)
	{
	case OPT_DEPTH:
	case OPT_RESOLUTION:
	case OPT_TL_X:
	case OPT_TL_Y:
	case OPT_BR_X:
	case OPT_BR_Y:
	  if (info)
	    *info |= SANE_INFO_RELOAD_PARAMS;
	case OPT_BRIGHT_ADJUST:
	case OPT_CONTR_ADJUST:
	  s->val[option] = *(SANE_Word *) val;
	  break;
	case OPT_BRIGHTNESS:
	  if (SANE_OPTION_IS_ACTIVE (s->opt[OPT_BRIGHT_ADJUST].cap))
	    {
	      s->opt[OPT_BRIGHT_ADJUST].cap |= SANE_CAP_INACTIVE;
	      if (info)
		*info |= SANE_INFO_RELOAD_OPTIONS;
	    }
	  s->val[option] = *(SANE_Word *) val;
	  break;
	case OPT_CONTRAST:
	  if (SANE_OPTION_IS_ACTIVE (s->opt[OPT_CONTR_ADJUST].cap))
	    {
	      s->opt[OPT_CONTR_ADJUST].cap |= SANE_CAP_INACTIVE;
	      if (info)
		*info |= SANE_INFO_RELOAD_OPTIONS;
	    }
	  s->val[option] = *(SANE_Word *) val;
	  break;
	default:
	  return SANE_STATUS_UNSUPPORTED;
	}

    }
  else if (action == SANE_ACTION_SET_AUTO)
    {

      if (!SANE_OPTION_IS_SETTABLE (s->opt[option].cap))
	return SANE_STATUS_UNSUPPORTED;

      switch (option)
	{
	case OPT_BRIGHTNESS:
	  if (!SANE_OPTION_IS_ACTIVE (s->opt[OPT_BRIGHT_ADJUST].cap))
	    {
	      s->opt[OPT_BRIGHT_ADJUST].cap &= ~SANE_CAP_INACTIVE;
	      if (info)
		*info |= SANE_INFO_RELOAD_OPTIONS;
	    }
	  break;
	case OPT_CONTRAST:
	  if (!SANE_OPTION_IS_ACTIVE (s->opt[OPT_CONTR_ADJUST].cap))
	    {
	      s->opt[OPT_CONTR_ADJUST].cap &= ~SANE_CAP_INACTIVE;
	      if (info)
		*info |= SANE_INFO_RELOAD_OPTIONS;
	    }
	  break;
	default:
	  return SANE_STATUS_UNSUPPORTED;
	}

    }
  else
    return SANE_STATUS_UNSUPPORTED;
  return SANE_STATUS_GOOD;
}

SANE_Status
sane_get_parameters (SANE_Handle handle, SANE_Parameters * params)
{
  S9036_Scanner *s = handle;

  if (!s->scanning)
    {
      double width, height, dpi;

      memset (&s->params, 0, sizeof (s->params));

      s->params.format = SANE_FRAME_GRAY;
      s->params.last_frame = SANE_TRUE;

      s->params.depth = s->val[OPT_DEPTH];

      width = SANE_UNFIX (s->val[OPT_BR_X] - s->val[OPT_TL_X]);
      height = SANE_UNFIX (s->val[OPT_BR_Y] - s->val[OPT_TL_Y]);
      dpi = s->val[OPT_RESOLUTION];

      /* make best-effort guess at what parameters will look like once
         scanning starts.  */
      if (dpi > 0.0 && width > 0.0 && height > 0.0)
	{
	  double dots_per_mm = dpi / MM_PER_INCH;

	  s->params.pixels_per_line = width * dots_per_mm + 0.5;
	  s->params.lines = height * dots_per_mm + 0.5;
	}

      s->params.bytes_per_line =
	(s->params.pixels_per_line + (8 - s->params.depth))
	/ (8 / s->params.depth);
    }

  if (params)
    *params = s->params;
  return SANE_STATUS_GOOD;
}

SANE_Status
sane_start (SANE_Handle handle)
{
  S9036_Scanner *s = handle;
  SANE_Status status;

  if (s->scanning)
    do_cancel (s);

  /* First make sure we have a current parameter set.  Some of the
     parameters will be overwritten below, but that's OK.  */
  status = sane_get_parameters (s, 0);
  if (status != SANE_STATUS_GOOD)
    return status;

  if (s->fd < 0)
    {
      status = sanei_scsi_open (s->hw->sane.name, &s->fd, sense_handler, 0);
      if (status != SANE_STATUS_GOOD)
	{
	  DBG (1, "open: open of %s failed: %s\n",
	       s->hw->sane.name, sane_strstatus (status));
	  s->fd = -1;
	  return status;
	}
    }

  status = test_ready (s->fd);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (1, "open: test_ready() failed: %s\n", sane_strstatus (status));
      sanei_scsi_close (s->fd);
      s->fd = -1;
      return status;
    }

  status = reserve_unit (s->fd);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (1, "open: reserve_unit() failed: %s\n", sane_strstatus (status));
      sanei_scsi_close (s->fd);
      s->fd = -1;
      return status;
    }

  status = set_window (s);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (1, "open: set_window() failed: %s\n", sane_strstatus (status));
      release_unit (s->fd);
      sanei_scsi_close (s->fd);
      s->fd = -1;
      return status;
    }

  s->scanning = SANE_TRUE;

  status = start_scan (s->fd, SANE_FALSE);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (1, "open: start_scan() failed: %s\n", sane_strstatus (status));
      do_cancel (s);
      return status;
    }

  wait_ready (s->fd);

  {
    int lines_available = 0, bytes_per_line = 0, total_lines = 0;

    status = get_read_sizes (s->fd, &lines_available, &bytes_per_line,
			     &total_lines);
    if (status != SANE_STATUS_GOOD)
      {
	DBG (1, "open: get_read_sizes() failed: %s\n",
	     sane_strstatus (status));
	do_cancel (s);
	return status;
      }

    if (!lines_available || !bytes_per_line || !total_lines)
      {
	DBG (1, "open: invalid_sizes(): %d, %d, %d\n",
	     lines_available, bytes_per_line, total_lines);
	do_cancel (s);
	return SANE_STATUS_INVAL;
      }

    s->params.lines = total_lines;
    s->params.bytes_per_line = bytes_per_line;
    s->params.pixels_per_line = bytes_per_line * (8 / s->params.depth);

    s->lines_in_scanner = lines_available;
    s->lines_read = 0;

    /* Buffer must be at least 4k */
    s->bufsize = (sanei_scsi_max_request_size < 4096) ?
	4096 : sanei_scsi_max_request_size;

    s->buffer = (Byte *) malloc (s->bufsize * sizeof (Byte));

    if (!s->buffer)
      {
	DBG (1, "open  malloc(%lu) failed.\n", (u_long) s->bufsize);
	do_cancel (s);
	return SANE_STATUS_NO_MEM;
      }
    s->bufstart = s->buffer;
    s->in_buffer = 0;
  }

  return SANE_STATUS_GOOD;
}

static void 
copy_buffer (S9036_Scanner * s, SANE_Byte ** buf, SANE_Int * max_len,
	     SANE_Int * len)
{
  if (*max_len > (SANE_Int) s->in_buffer)
    {
      memcpy (*buf, s->bufstart, s->in_buffer);
      *buf += s->in_buffer;
      *len += s->in_buffer;
      *max_len -= s->in_buffer;

      s->bufstart = s->buffer;
      s->in_buffer = 0;
    }
  else
    {
      memcpy (*buf, s->bufstart, *max_len);
      s->bufstart += *max_len;
      s->in_buffer -= *max_len;

      *buf += *max_len;
      *len += *max_len;
      *max_len = 0;
    }
}


SANE_Status
sane_read (SANE_Handle handle, SANE_Byte * buf, SANE_Int max_len,
	   SANE_Int * len)
{
  S9036_Scanner *s = handle;
  SANE_Status status;

  if (s->scanning != SANE_TRUE || max_len == 0)
    return SANE_STATUS_INVAL;

  *len = 0;

  DBG (3, "sane_read(%d) : lines_read %d\n", max_len, s->lines_read);

  while (max_len > (SANE_Int) s->in_buffer && s->lines_read < s->params.lines)
    {

      if (s->in_buffer == 0)
	{
	  status = read_more_data (s);

	  if (status != SANE_STATUS_GOOD)
	    {
	      DBG (1, "sane_read: read_more_data() failed (%s)\n",
		   sane_strstatus (status));
	      do_cancel (s);
	      return status;
	    }
	}

      copy_buffer (s, &buf, &max_len, len);

      if (!max_len || s->lines_read >= s->params.lines)
	return SANE_STATUS_GOOD;
    }

  /* If we reached this point, there are either enough bytes in the buffer,
     or, if the buffer is empty, we already reached the end of the page */

  if (s->in_buffer > 0)
    {
      copy_buffer (s, &buf, &max_len, len);
      return SANE_STATUS_GOOD;
    }
  else
    {
      do_cancel (s);
      DBG (1, "EOF\n");
      return SANE_STATUS_EOF;
    }
}

void
sane_cancel (SANE_Handle handle)
{
  S9036_Scanner *s = handle;
  do_cancel (s);
}

SANE_Status
sane_set_io_mode (SANE_Handle handle, SANE_Bool non_blocking)
{
  handle = handle; /* silence compilation warnings */
  
  DBG (1, "sane_set_io_mode(%d)\n", non_blocking);

  return (non_blocking == SANE_TRUE) ?
      SANE_STATUS_UNSUPPORTED : SANE_STATUS_GOOD;
}

SANE_Status
sane_get_select_fd (SANE_Handle handle, SANE_Int * fd)
{
  handle = handle;
  fd = fd; /* silence compilation warnings */

  return SANE_STATUS_UNSUPPORTED;
}