/* sane - Scanner Access Now Easy.

   Copyright (C) 2004 - 2006 Gerard Klaver  <gerard at gkall dot hobby dot nl>

   The teco2 and gl646 backend (Frank Zago) are used as a template for
   this backend.

   For the usb commands and bayer decoding parts of the following
   program are used:
   The pencam2 program  (GNU GPL license 2)

   For the usb commands parts of the following programs are used:
   The libgphoto2 (camlib stv0680)   (GNU GPL license 2)
   The stv680.c/.h kernel module   (GNU GPL license 2)

   For the stv680_add_text routine the add_text routine and font_6x11.h file
   are taken from the webcam.c file, part of xawtv program,
   (c) 1998-2002 Gerd Knorr (GNU GPL license 2).

   This file is part of the SANE package.

   This program is free software; you can redistribute it and/or
   modify it under the terms of the GNU General Public License as
   published by the Free Software Foundation; either version 2 of the
   License, or (at your option) any later version.

   This program is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <https://www.gnu.org/licenses/>.
   ------------------------------------------------------------------
*/

/*
   stv680 vidcam  driver Gerard Klaver
*/

/*SANE FLOW DIAGRAM

   - sane_init() : initialize backend, attach vidcams
   . - sane_get_devices() : query list of vidcam devices
   . - sane_open() : open a particular vidcam device
   . . - sane_set_io_mode : set blocking mode
   . . - sane_get_select_fd : get vidcam fd
   . . - sane_get_option_descriptor() : get option information
   . . - sane_control_option() : change option values
   . .
   . . - sane_start() : start image acquisition
   . .   - sane_get_parameters() : returns actual scan parameters
   . .   - sane_read() : read image data (from pipe)
   . .     (sane_read called multiple times;
   . .      after sane_read returns EOF)
   . .     go back to sane_start() if more frames desired
   . . - sane_cancel() : cancel operation
   . - sane_close() : close opened vidcam device
   - sane_exit() : terminate use of backend
*/
/*--------------------------------------------------------------------------*/

#define BUILD 1			/* 2004/09/09  update 20-04-2006 */
#define BACKEND_NAME stv680
#define STV680_CONFIG_FILE "stv680.conf"

/* --------------------- SANE INTERNATIONALISATION ------------------------ */

/* must be first include */
#include "../include/sane/config.h"

#include <errno.h>
#include <fcntl.h>
#include <limits.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>

#include "../include/sane/sane.h"
#include "../include/sane/sanei.h"
#include "../include/sane/saneopts.h"
#include "../include/sane/sanei_usb.h"
#include "../include/sane/sanei_debug.h"
#include "../include/sane/sanei_backend.h"
#include "../include/sane/sanei_config.h"
#include "../include/lassert.h"

/* for add-text routine  */
#include <time.h>
#include "../include/font_6x11.h"
/*-----------------------*/

#include "stv680.h"

#define TIMEOUT 1000

/*--------------------------------------------------------------------------*/
/* Lists of possible scan modes. */
static SANE_String_Const scan_mode_list[] = {
  COLOR_RGB_STR,
  COLOR_RGB_TEXT_STR,
  SANE_VALUE_SCAN_MODE_COLOR,
  COLOR_RAW_STR,

  NULL
};

/*-----------------------------------------minium, maximum, quantization----*/
static const SANE_Range brightness_range = { -128, 128, 1 };

static const SANE_Range red_level_range = { -32, 32, 1 };

static const SANE_Range green_level_range = { -32, 32, 1 };

static const SANE_Range blue_level_range = { -32, 32, 1 };

/*--------------------------------------------------------------------------*/

static const struct dpi_color_adjust stv680_dpi_color_adjust[] = {

  /*dpi, y, x, color sequence R G or B */
  {176, 144, 0, 1, 2},		/* QCIF  selected by dev->CIF  */
  {352, 288, 0, 1, 2},		/* CIF            ,,           */
  {160, 120, 0, 1, 2},		/* QSIF           ,, dev->VGA  */
  {320, 240, 0, 1, 2},		/* QVGA (SIF)     ,,           */
  {640, 480, 0, 1, 2},		/* VGA            ,,           */
  /* must be the last entry */
  {0, 0, 0, 0, 0}
};

static const struct vidcam_hardware vidcams[] = {

  {0x0553, 0x0202, USB_CLASS_VENDOR_SPEC,
   "AIPTEK", "PENCAM STV0680",
   stv680_dpi_color_adjust},

  {0x04c8, 0x0722, USB_CLASS_VENDOR_SPEC,
   "Konica", "e-mini",
   stv680_dpi_color_adjust},

  {0x1183, 0x0001, USB_CLASS_VENDOR_SPEC,
   "DigitalDream", "l'espion XS",
   stv680_dpi_color_adjust},

  {0x041e, 0x4007, USB_CLASS_VENDOR_SPEC,
   "Creative", "WebCam Go mini",
   stv680_dpi_color_adjust}
};

/* List of vidcams attached. */
static Stv680_Vidcam *first_dev = NULL;
static int num_devices = 0;
/* used by sane_get_devices */
static const SANE_Device **devlist = NULL;

/*----------------------------------------------------------- */

/* Local functions. */

/* Display a buffer in the log. Display by lines of 16 bytes. */
static void
hexdump (int level, const char *comment, unsigned char *buf, const int length)
{
  int i;
  char line[128];
  char *ptr;
  char asc_buf[17];
  char *asc_ptr;

  DBG (level, "  %s\n", comment);

  i = 0;
  goto start;

  do
    {
      if (i < length)
	{
	  ptr += sprintf (ptr, " %2.2x", *buf);

	  if (*buf >= 32 && *buf <= 127)
	    {
	      asc_ptr += sprintf (asc_ptr, "%c", *buf);
	    }
	  else
	    {
	      asc_ptr += sprintf (asc_ptr, ".");
	    }
	}
      else
	{
	  /* After the length; do nothing. */
	  ptr += sprintf (ptr, "   ");
	}

      i++;
      buf++;

      if ((i % 16) == 0)
	{
	  /* It's a new line */
	  DBG (level, "  %s    %s\n", line, asc_buf);

	start:
	  ptr = line;
	  *ptr = '\0';
	  asc_ptr = asc_buf;
	  *asc_ptr = '\0';

	  ptr += sprintf (ptr, "  %3.3d:", i);
	}
    }
  while (i < ((length + 15) & ~15));
}

/* Returns the length of the longest string, including the terminating
 * character. */
static size_t
max_string_size (SANE_String_Const strings[])
{
  size_t size, max_size = 0;
  int i;

  for (i = 0; strings[i]; ++i)
    {
      size = strlen (strings[i]) + 1;
      if (size > max_size)
	{
	  max_size = size;
	}
    }
  return max_size;
}

/* Initialize a vidcam entry. Return an allocated vidcam with some
 *  */
static Stv680_Vidcam *
stv680_init (void)
{
  Stv680_Vidcam *dev;

  DBG (DBG_proc, "stv680_init: enter\n");

  /* Allocate a new vidcam entry. */
  dev = malloc (sizeof (Stv680_Vidcam));
  if (dev == NULL)
    {
      return NULL;
    }
  memset (dev, 0, sizeof (Stv680_Vidcam));

/* Allocate the windoww buffer*/
  dev->windoww_size = 0x20;
  dev->windoww = malloc (dev->windoww_size);
  if (dev->windoww == NULL)
    {
      free (dev);
      return NULL;
    }

/* Allocate the windowr buffer*/
  dev->windowr_size = 0x20;
  dev->windowr = malloc (dev->windowr_size);
  if (dev->windowr == NULL)
    {
      free (dev->windoww);
      free (dev);
      return NULL;
    }

  dev->fd = -1;

  DBG (DBG_proc, "stv680_init: exit\n");

  return (dev);
}

static SANE_Status
stv680_init_2 (Stv680_Vidcam * dev)
{
  SANE_Status status;

  DBG (DBG_proc, "stv680_init_2: enter\n");

  /* Allocate the buffer used to transfer the USB data */
  /* Check for max. format image size so buffer size can
   * be adjusted, format from camera is bayer 422 */
  if (dev->CIF)
    dev->buffer_size = 356 * 292;
  if (dev->VGA)
    dev->buffer_size = 644 * 484;
  DBG (DBG_proc, "stv680_init_2: dev->buffer = 0x%lx\n", (unsigned long) (size_t) dev->buffer_size);

  dev->buffer = malloc (dev->buffer_size);

  if (dev->buffer == NULL)
    {
      free (dev->windowr);
      free (dev->windoww);
      free (dev);
      return SANE_STATUS_NO_MEM;
    }

  /* Allocate the output buffer used for bayer conversion */
  dev->output_size = dev->buffer_size * 3;

  dev->output = malloc (dev->output_size);
  if (dev->output == NULL)
    {
      free (dev->windowr);
      free (dev->windoww);
      free (dev->buffer);
      free (dev);

      return SANE_STATUS_NO_MEM;
    }
  dev->image_size = dev->buffer_size;

  dev->image = malloc (dev->image_size);
  if (dev->image == NULL)
    {
      free (dev->windowr);
      free (dev->windoww);
      free (dev->buffer);
      free (dev->output);
      free (dev);

      return SANE_STATUS_NO_MEM;
    }

  DBG (DBG_proc, "stv680_init_2: exit\n");
  status = SANE_STATUS_GOOD;
  return status;
}

/* Closes an open vidcams. */
static void
stv680_close (Stv680_Vidcam * dev)
{
  DBG (DBG_proc, "stv680_close: enter \n");

  if (dev->fd != -1)
    {

      DBG (DBG_proc, "stv680_close: fd !=-1 \n");
      sanei_usb_close (dev->fd);
      dev->fd = -1;
    }

  DBG (DBG_proc, "stv680_close: exit\n");
}

/* Frees the memory used by a vidcam. */
static void
stv680_free (Stv680_Vidcam * dev)
{
  int i;

  DBG (DBG_proc, "stv680_free: enter\n");

  if (dev == NULL)
    return;

  stv680_close (dev);
  if (dev->devicename)
    {
      free (dev->devicename);
    }
  if (dev->buffer)
    {
      free (dev->buffer);
    }
  if (dev->output)
    {
      free (dev->output);
    }
  if (dev->image)
    {
      free (dev->image);
    }
  if (dev->windoww)
    {
      free (dev->windoww);
    }
  if (dev->windowr)
    {
      free (dev->windowr);
    }
  for (i = 1; i < OPT_NUM_OPTIONS; i++)
    {
      if (dev->opt[i].type == SANE_TYPE_STRING && dev->val[i].s)
	{
	  free (dev->val[i].s);
	}
    }
  if (dev->resolutions_list)
    free (dev->resolutions_list);

  free (dev);

  DBG (DBG_proc, "stv680_free: exit\n");
}

static SANE_Status
stv680_set_config (Stv680_Vidcam * dev, int configuration, int interface,
		   int alternate)
{
  SANE_Status status;
  DBG (DBG_proc, "stv680_set_config: open\n");
/* seems a problem on some systems (Debian amd64 unstable 19042006)
 * not calling usb_set_configuration seems to help reason ?
  status = sanei_usb_set_configuration (dev->fd, configuration);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (DBG_error,
	   "stv680_set_config: STV680 FAILED to set configuration %d\n",
	   configuration);
      return status;
    }
*/
  status = sanei_usb_claim_interface (dev->fd, interface);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (DBG_error,
	   "stv680_set_config: STV0680 FAILED to claim interface\n");
      return status;
    }

  status = sanei_usb_set_altinterface (dev->fd, alternate);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (DBG_error,
	   "stv680_set_config: STV0680 FAILED to set alternate interface %d\n",
	   alternate);
      return status;
    }
  DBG (DBG_proc,
       "stv680_set_config: configuration=%d, interface=%d, alternate=%d\n",
       configuration, interface, alternate);

  DBG (DBG_proc, "stv680_set_config: exit\n");
  return status;
}

/* Reset vidcam */
static SANE_Status
stv680_reset_vidcam (Stv680_Vidcam * dev)
{
  SANE_Status status;
  size_t sizew;			/* significant size of window */
  size_t sizer;

  DBG (DBG_proc, "stv680_reset_vidcam: enter\n");

  sizew = dev->windoww_size;
  sizer = dev->windowr_size;

  memset (dev->windoww, 0, sizew);
  memset (dev->windowr, 0, sizer);

  sizew = 0x00;			/* was 0 ? */
  status =
    sanei_usb_control_msg (dev->fd, 0x41, 0x0a, 0x0000, 0, sizew,
			   dev->windoww);
  if (status != SANE_STATUS_GOOD)
    {
      return status;
    }
  DBG (DBG_proc, "stv680_reset_vidcam: CMDID_STOP_VIDEO end\n");

  /* this is a high priority command; it stops all lower order commands */

  sizew = 0x00;			/* was 0 */
  status =
    sanei_usb_control_msg (dev->fd, 0x41, 0x04, 0x0000, 0, sizew,
			   dev->windoww);
  if (status != SANE_STATUS_GOOD)
    {
      return status;
    }
  DBG (DBG_proc, "stv680_reset_vidcam: CMDID_CANCEL_TRANSACTION end\n");
  sizer = 0x02;
  DBG (DBG_proc, "stv680_reset_vidcam: CMDID_GET_LAST_ERROR begin\n");
  status =
    sanei_usb_control_msg (dev->fd, 0xc1, 0x80, 0x0000, 0, sizer,
			   dev->windowr);
  if (status != SANE_STATUS_GOOD)
    {
      /* Get Last Error; 2 = busy */
      DBG (DBG_proc,
	   "stv680_reset_vidcam: last error: %i, command = 0x%x\n",
	   dev->windowr[0], dev->windowr[1]);
      return status;
    }
  else
    {
      DBG (DBG_proc, "stv680_reset_vidcam: Camera reset to idle mode.\n");
    }
  hexdump (DBG_info2, "stv680_reset_vidcam: CMDID_GET_LAST_ERROR",
	   dev->windowr, sizer);

  /*  configuration = 1, interface = 0, alternate = 0 */
  /*
  status = stv680_set_config (dev, 1, 0, 0);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (DBG_error,
	   "stv680_reset_vidcam: STV680 FAILED to set configure\n");
      return status;
    }
    */
  status = SANE_STATUS_GOOD;
  DBG (DBG_proc, "stv680_reset_vidcam: exit\n");

  return status;
}

/* Inquiry a device and returns TRUE if is supported. */
static int
stv680_identify_vidcam (Stv680_Vidcam * dev)
{
  SANE_Status status;
  SANE_Word vendor;
  SANE_Word product;
  int i;
  size_t sizer;

  DBG (DBG_info, "stv680_identify_vidcam: open\n");

  status = sanei_usb_get_vendor_product (dev->fd, &vendor, &product);

  /* Loop through our list to make sure this scanner is supported. */
  for (i = 0; i < NELEMS (vidcams); i++)
    {
      if (vidcams[i].vendor == vendor && vidcams[i].product == product)
	{

	  DBG (DBG_info, "stv680_identify_vidcam: vidcam %x:%x is in list\n",
	       vendor, product);

	  dev->hw = &(vidcams[i]);

	  sizer = dev->windowr_size;
	  memset (dev->windowr, 0, sizer);

	  /*  configuration = 1, interface = 0, alternate = 0 */
	  /*
	  status = stv680_set_config (dev, 1, 0, 0);
	  if (status != SANE_STATUS_GOOD)
	    {
	      DBG (DBG_error,
		   "stv680_vidcam_init: STV680 FAILED to set configure\n");
	      return status;
	    }
          */
	  sizer = 0x02;
	  status =
	    sanei_usb_control_msg (dev->fd, 0xc1, 0x88, 0x5678, 0, sizer,
				   dev->windowr);
	  if (status != SANE_STATUS_GOOD)
	    {
	      DBG (DBG_error,
		   "stv680_identify_vidcam: this is not a STV680 (idVendor = %d, bProduct = %d) writing register failed with %s\n",
		   vendor, product, sane_strstatus (status));
	      return SANE_FALSE;
	    }
	  if ((dev->windowr[0] != 0x56) || (dev->windowr[1] != 0x78))
	    {
	      DBG (DBG_proc,
		   "STV(e): camera ping failed!!, checkvalue !=0x5678\n");
	      sizer = 0x02;
	      hexdump (DBG_info2, "urb12 window", dev->windowr, sizer);
	      return SANE_FALSE;
	    }
	  sizer = 0x02;
	  hexdump (DBG_info2, "urb12 ping data", dev->windowr, sizer);

	  sizer = 0x10;
	  status =
	    sanei_usb_control_msg (dev->fd, 0xc1, 0x85, 0x0000, 0, sizer,
				   dev->windowr);
	  if (status != SANE_STATUS_GOOD)
	    return SANE_FALSE;

	  hexdump (DBG_info2, "urbxx CMDID_GET_CAMERA_INFO", dev->windowr,
		   sizer);

	  dev->SupportedModes = dev->windowr[7];
	  i = dev->SupportedModes;
	  dev->QSIF = 0;
	  dev->CIF = 0;
	  dev->QCIF = 0;
	  dev->VGA = 0;
	  dev->QVGA = 0;
	  if (i & 1)
	    dev->CIF = 1;
	  if (i & 2)
	    dev->VGA = 1;
	  if (i & 8)
	    dev->QVGA = 1;
	  if (i & 4)
	    dev->QCIF = 1;
	  dev->QSIF = dev->QVGA;	/* for software subsample */
	  if (dev->SupportedModes == 0)
	    {
	      DBG (DBG_proc,
		   "STV(e): There are NO supported STV680 modes!!\n");
	      i = -1;
	      return SANE_FALSE;
	    }
	  else
	    {
	      if (dev->VGA)
		DBG (DBG_proc, "STV(i): VGA is supported\n");
	      if (dev->CIF)
		DBG (DBG_proc, "STV(i): CIF is supported\n");
	      if (dev->QVGA)
		DBG (DBG_proc, "STV(i): QVGA is supported\n");
	      if (dev->QCIF)
		DBG (DBG_proc, "STV(i): QCIF is supported\n");
	    }

	  /* FW rev, ASIC rev, sensor ID  */
	  DBG (DBG_proc, "STV(i): Firmware rev is %i.%i\n", dev->windowr[0],
	       dev->windowr[1]);
	  DBG (DBG_proc, "STV(i): ASIC rev is %i.%i\n", dev->windowr[2],
	       dev->windowr[3]);
	  DBG (DBG_proc, "STV(i): Sensor ID is %i.%i\n", (dev->windowr[4]),
	       (dev->windowr[5]));
	  /* Hardware config  */
	  dev->HardwareConfig = dev->windowr[6];
	  i = dev->HardwareConfig;
	  /* Comms link, Flicker freq, Mem size */
	  if (i & 1)
	    DBG (DBG_proc, "STV(i): Comms link is serial\n");
	  else
	    DBG (DBG_proc, "STV(i): Comms link is USB\n");
	  if (i & 2)
	    DBG (DBG_proc, "STV(i): Flicker freq = 60 Hz\n");
	  else
	    DBG (DBG_proc, "STV(i): Flicker freq = 50 Hz\n");
	  if (i & 4)
	    DBG (DBG_proc, "STV(i): Mem size = 16Mbit\n");
	  else
	    DBG (DBG_proc, "STV(i): Mem size = 64Mbit\n");
	  if (i & 8)
	    DBG (DBG_proc, "STV(i): Thumbnails supported\n");
	  else
	    DBG (DBG_proc, "STV(i): Thumbnails N/A\n");
	  if (i & 16)
	    DBG (DBG_proc, "STV(i): Video supported\n");
	  else
	    DBG (DBG_proc, "STV(i): Video N/A\n");
	  if (i & 32)
	    DBG (DBG_proc, "STV(i): Startup Complete\n");
	  else
	    DBG (DBG_proc, "STV(i): Startup Not Complete\n");
	  if (i & 64)
	    DBG (DBG_proc, "STV(i): Monochrome\n");
	  else
	    DBG (DBG_proc, "STV(i): Color\n");
	  if (i & 128)
	    DBG (DBG_proc, "STV(i): Mem fitted\n");
	  else
	    DBG (DBG_proc, "STV(i): Mem not fitted\n");

	  DBG (DBG_proc, "urb 25 CMDID_GET_IMAGE_INFO\n");
	  sizer = 0x10;
	  status =
	    sanei_usb_control_msg (dev->fd, 0xc1, 0x86, 0x0000, 0, sizer,
				   dev->windowr);
	  if (status != SANE_STATUS_GOOD)
	    {
	      return SANE_FALSE;
	    }
	  hexdump (DBG_info2, "urb25 CMDID_GET_IMAGE_INFO", dev->windowr,
		   sizer);
	  DBG (DBG_proc, "STV(i): Current image index %d\n",
	       ((dev->windowr[0] << 8) + (dev->windowr[1])));
	  DBG (DBG_proc,
	       "If images are stored in camera, they will be lost when captering images is started!!!!!\n");
	  DBG (DBG_proc, "STV(i): Max images %d\n",
	       ((dev->windowr[2] << 8) + (dev->windowr[3])));
	  DBG (DBG_proc, "STV(i): Image width (pix) %d\n",
	       ((dev->windowr[4] << 8) + (dev->windowr[5])));
	  DBG (DBG_proc, "STV(i): Image height (pix) %d\n",
	       ((dev->windowr[6] << 8) + (dev->windowr[7])));
	  DBG (DBG_proc, "STV(i): Image size camera %d bytes\n",
	       ((dev->windowr[8] << 24) + (dev->windowr[9] << 16) +
		(dev->windowr[10] << 8) + (dev->windowr[11])));

	  /*  configuration = 1, interface = 0, alternate = 1 */
	  status = stv680_set_config (dev, 1, 0, 1);
	  /*
	  if (status != SANE_STATUS_GOOD)
	    {
	      DBG (DBG_error,
		   "stv680_vidcam_init: STV680 FAILED to set configure\n");
	      return status;
	    }

	  DBG (DBG_info, "stv680_identify_vidcam: exit vidcam supported\n");
	  */
	  return SANE_TRUE;
	}
    }
  DBG (DBG_error, "stv680_identify_vidcam: exit this is not a STV680 exit\n");
  return SANE_FALSE;
}

static SANE_Status
stv680_vidcam_init (Stv680_Vidcam * dev)
{
  SANE_Status status;
  SANE_Byte i = 0;
  SANE_Byte val = 0;
  size_t sizer;
  size_t sizew;
  DBG (DBG_proc, "stv680_vidcam_init: open\n");

  sizew = dev->windoww_size;
  sizer = dev->windowr_size;

  memset (dev->windoww, 0, sizew);
  memset (dev->windowr, 0, sizer);

  DBG (DBG_proc, "stv680_vidcam_init: urb 13 CMDID_GET_USER_INFO\n");
  dev->video_status = 0x04;	/* dummy value busy */

  while (dev->video_status == 0x04)
    {
      sizer = 0x08;
      status =
	sanei_usb_control_msg (dev->fd, 0xc1, 0x8d, 0x0000, 0, sizer,
			       dev->windowr);
      if (status != SANE_STATUS_GOOD)
	return status;

      hexdump (DBG_info2, "stv680_vidcam_init: urb13 CMDID_GET_USER_INFO",
	       dev->windowr, sizer);

      dev->video_status = dev->windowr[1];
      if (dev->video_status == 0x02)
	{
	  DBG (DBG_proc, "stv680_vidcam_init: status = video\n");
	}
      else if ((dev->video_status == 0x01) || (dev->video_status == 0x08))
	{
	  DBG (DBG_proc, "stv680_vidcam_init: status=%d\n",
	       dev->video_status);
	}
      else if (dev->video_status != 0x04)
	{
	  DBG (DBG_proc, "stv680_vidcam_init: status = busy\n");
	  /*  CMDID_CANCEL_TRANSACTION */
	  status =
	    sanei_usb_control_msg (dev->fd, 0x41, 0x04, 0x0000, 0, 0, 0);
	  if (status != SANE_STATUS_GOOD)
	    {
	      DBG (DBG_info,
		   "stv680_vidcam_init: urb13 CMDID_CANCEL_TRANSACTION NOK\n");
	      return status;
	    }
	}
    }

  if (dev->video_status == 0x01 || dev->video_status == 0x08)
    {
      DBG (DBG_proc, "stv680_vidcam_init: urb 21 CMDID_GET_COLDATA_SIZE\n");
      sizer = 0x02;
      status =
	sanei_usb_control_msg (dev->fd, 0xc1, 0x8a, 0x0000, 0, sizer,
			       dev->windowr);
      if (status != SANE_STATUS_GOOD)
	return status;

      val = dev->windowr[0];
      hexdump (DBG_info2, "stv680_vidcam_init: urb21 CMDID_GET_COLDATA_SIZE",
	       dev->windowr, sizer);
      if (dev->windowr[0] &= 0x00)
	DBG (DBG_info,
	     "stv680_vidcam_init: no camera defaults, must be downloaded?\n");

      sizer = 0x10;
      for (i = 0; i < val; i += 0x10)
	{
	  DBG (DBG_proc,
	       "stv680_vidcam_init: urb 22, 23, 24 CMDID_GET_COLDATA i=0x%x, val=0x%x\n",
	       i, val);
	  status =
	    sanei_usb_control_msg (dev->fd, 0xc1, 0x8b, (i << 8), 0, sizer,
				   dev->windowr);
	  if (status != SANE_STATUS_GOOD)
	    return status;
	  hexdump (DBG_info2,
		   "stv680_vidcam_init: urb22, 23, 24 CMDID_GET_COLDATA",
		   dev->windowr, sizer);
	}

      sizer = 0x12;
      status =
	sanei_usb_control_msg (dev->fd, 0x80, 0x06, 0x0100, 0, sizer,
			       dev->windowr);
      if (status != SANE_STATUS_GOOD)
	return status;
      /* if (!(i > 0) && (dev->windowr[8] == 0x53) && (dev->windowr[9] == 0x05))
         {
         DBG (DBG_proc, "STV(e): Could not get descriptor 0100.");
       *//* return status;  *//*
         } */
      sizer = 0x12;
      hexdump (DBG_info2, "stv680_vidcam_init: CMDID_SET_IMAGE_INDEX",
	       dev->windowr, sizer);

      /*  configuration = 1, interface = 0, alternate = 1 */
      status = stv680_set_config (dev, 1, 0, 1);
      if (status != SANE_STATUS_GOOD)
	{
	  DBG (DBG_error,
	       "stv680_vidcam_init: STV680 FAILED to set configure\n");
	  return status;
	}
    }
  /*  Switch to Video mode: 0x0000 = CIF (352x288), 0x0200 = QCIF (176x144)  */
  /*  Switch to Video mode: 0x0100 = VGA (640x480), 0x0300 = QVGA (320x240)  */
  sizew = 0x0;
  status =
    sanei_usb_control_msg (dev->fd, 0x41, 0x09, dev->video_mode, 0, sizew,
			   dev->windoww);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (DBG_proc, "stv680_vidcam_init: video_mode = 0x%x\n",
	   dev->video_mode);
      return status;
    }
  DBG (DBG_proc,
       "stv680_vidcam_init: CMDID_START_VIDEO: video_mode=0x%x\n",
       dev->video_mode);

  if (dev->x_resolution == 176)
    {
      usleep (1000);		/* delay time needed */
    }
  status = SANE_STATUS_GOOD;

  if (status)
    {
      DBG (DBG_error, "stv680_vidcam_init failed : %s\n",
	   sane_strstatus (status));
      return status;
    }
  DBG (DBG_proc, "stv680_vidcam_init: exit\n");
  return status;
}

/* Attach a vidcam to this backend. */
static SANE_Status
attach_vidcam (SANE_String_Const devicename, Stv680_Vidcam ** devp)
{
  Stv680_Vidcam *dev;
  int fd;
  SANE_Status status;

  DBG (DBG_proc, "attach_vidcam: %s\n", devicename);

  if (devp)
    *devp = NULL;

  /* Check if we know this device name. */
  for (dev = first_dev; dev; dev = dev->next)
    {
      if (strcmp (dev->sane.name, devicename) == 0)
	{
	  if (devp)
	    {
	      *devp = dev;
	    }
	  DBG (DBG_info, "device is already known\n");
	  return SANE_STATUS_GOOD;
	}
    }

  /* Allocate a new vidcam entry. */
  dev = stv680_init ();
  if (dev == NULL)
    {
      DBG (DBG_error, "stv680_init ERROR: not enough memory\n");
      return SANE_STATUS_NO_MEM;
    }

  DBG (DBG_info, "attach_vidcam: opening USB device %s\n", devicename);

  if (sanei_usb_open (devicename, &fd) != 0)
    {
      DBG (DBG_error, "ERROR: attach_vidcam: open failed\n");
      stv680_free (dev);
      return SANE_STATUS_INVAL;
    }
  /* Fill some scanner specific values. */
  dev->devicename = strdup (devicename);
  dev->fd = fd;

  /* Now, check that it is a vidcam we support. */

  if (stv680_identify_vidcam (dev) == SANE_FALSE)
    {
      DBG (DBG_error, "ERROR: attach_vidcam: vidcam-identification failed\n");
      stv680_free (dev);
      return SANE_STATUS_INVAL;
    }

  /* Allocate a buffer memory. */
  status = stv680_init_2 (dev);
  if (status != SANE_STATUS_GOOD)
    {
      DBG (DBG_error, "stv680_initi_2, ERROR: not enough memory\n");
      return SANE_STATUS_NO_MEM;
    }

  stv680_close (dev);

  DBG (DBG_info, "attach_vidcam: opening USB device %s\n", devicename);

  /* Build list of vidcam supported resolutions. */
  DBG (DBG_proc, "attach_vidcam: build resolution list\n");

  if (dev->hw->color_adjust[0].resolution_x != 0)
    {
      int num_entries;
      int i;
      num_entries = 0;

      while (dev->hw->color_adjust[num_entries].resolution_x != 0)
	num_entries++;

      dev->resolutions_list = malloc (sizeof (SANE_Word) * (num_entries + 1));

      if (dev->resolutions_list == NULL)
	{
	  DBG (DBG_error,
	       "ERROR: attach_vidcam: vidcam resolution list failed\n");
	  stv680_free (dev);
	  return SANE_STATUS_NO_MEM;
	}
      /* for CIF or VGA sensor different resolutions  */
      if (dev->CIF)
	num_entries = 2;
      if (dev->VGA)
	num_entries = 3;
      dev->resolutions_list[0] = num_entries;
      DBG (DBG_proc, "attach_vidcam: make color resolution table \n");
      for (i = 0; i < num_entries; i++)
	{
	  dev->resolutions_list[i + 1 + dev->VGA + dev->QVGA] =
	    dev->hw->color_adjust[i].resolution_x;
	}
    }
  else
    {
      dev->resolutions_list = NULL;
    }

  /* Set the default options for that vidcam. */
  dev->sane.name = dev->devicename;
  dev->sane.vendor = dev->hw->vendor_name;
  dev->sane.model = dev->hw->product_name;
  dev->sane.type = SANE_I18N ("webcam");

  /* Link the vidcam with the others. */
  dev->next = first_dev;
  first_dev = dev;

  if (devp)
    {
      *devp = dev;
    }

  num_devices++;

  DBG (DBG_proc, "attach_vidcam: exit\n");

  return SANE_STATUS_GOOD;
}

static SANE_Status
attach_one (const char *dev)
{
  DBG (DBG_proc, "attach_one: open \n");
  attach_vidcam (dev, NULL);
  DBG (DBG_proc, "attach_one: exit \n");
  return SANE_STATUS_GOOD;
}

/* Reset the options for that vidcam. */
static void
stv680_init_options (Stv680_Vidcam * dev)
{
  int i;

  DBG (DBG_proc, "stv680_init_options: open\n");

  /* Pre-initialize the options. */
  memset (dev->opt, 0, sizeof (dev->opt));
  memset (dev->val, 0, sizeof (dev->val));

  for (i = 0; i < OPT_NUM_OPTIONS; ++i)
    {
      dev->opt[i].size = sizeof (SANE_Word);
      dev->opt[i].cap = SANE_CAP_SOFT_SELECT | SANE_CAP_SOFT_DETECT;
    }
  DBG (DBG_proc,
       "stv680_init_options: done loop opt_num_options=%d, i=%d \n",
       OPT_NUM_OPTIONS, i);
  /* Number of options. */
  dev->opt[OPT_NUM_OPTS].name = "";
  dev->opt[OPT_NUM_OPTS].title = SANE_TITLE_NUM_OPTIONS;
  dev->opt[OPT_NUM_OPTS].desc = SANE_DESC_NUM_OPTIONS;
  dev->opt[OPT_NUM_OPTS].type = SANE_TYPE_INT;
  dev->opt[OPT_NUM_OPTS].cap = SANE_CAP_SOFT_DETECT;
  dev->val[OPT_NUM_OPTS].w = OPT_NUM_OPTIONS;

  /* Mode group */
  dev->opt[OPT_MODE_GROUP].title = SANE_I18N ("Scan Mode");
  dev->opt[OPT_MODE_GROUP].desc = "";	/* not valid for a group */
  dev->opt[OPT_MODE_GROUP].type = SANE_TYPE_GROUP;
  dev->opt[OPT_MODE_GROUP].cap = 0;
  dev->opt[OPT_MODE_GROUP].size = 0;
  dev->opt[OPT_MODE_GROUP].constraint_type = SANE_CONSTRAINT_NONE;

  /* Vidcam supported modes */
  dev->opt[OPT_MODE].name = SANE_NAME_SCAN_MODE;
  dev->opt[OPT_MODE].title = SANE_TITLE_SCAN_MODE;
  dev->opt[OPT_MODE].desc = SANE_DESC_SCAN_MODE;
  dev->opt[OPT_MODE].type = SANE_TYPE_STRING;
  dev->opt[OPT_MODE].size = max_string_size (scan_mode_list);
  dev->opt[OPT_MODE].constraint_type = SANE_CONSTRAINT_STRING_LIST;
  dev->opt[OPT_MODE].constraint.string_list = scan_mode_list;
  dev->val[OPT_MODE].s = (SANE_Char *) strdup ("");	/* will be set later */

  /* X and Y resolution */
  dev->opt[OPT_RESOLUTION].name = SANE_NAME_SCAN_RESOLUTION;
  dev->opt[OPT_RESOLUTION].title = SANE_TITLE_SCAN_RESOLUTION;
  dev->opt[OPT_RESOLUTION].desc = SANE_DESC_SCAN_RESOLUTION;
  dev->opt[OPT_RESOLUTION].type = SANE_TYPE_INT;
  dev->opt[OPT_RESOLUTION].unit = SANE_UNIT_DPI;
  dev->opt[OPT_RESOLUTION].constraint_type = SANE_CONSTRAINT_RANGE;
  dev->val[OPT_RESOLUTION].w = dev->resolutions_list[dev->CIF + dev->QCIF + dev->VGA + dev->QVGA + dev->QSIF];	/* value will be 2 or 3 */

  /* brightness   */
  dev->opt[OPT_BRIGHTNESS].name = SANE_NAME_BRIGHTNESS;
  dev->opt[OPT_BRIGHTNESS].title = SANE_TITLE_BRIGHTNESS;
  dev->opt[OPT_BRIGHTNESS].desc = SANE_DESC_BRIGHTNESS;
  dev->opt[OPT_BRIGHTNESS].type = SANE_TYPE_INT;
  dev->opt[OPT_BRIGHTNESS].unit = SANE_UNIT_NONE;
  dev->opt[OPT_BRIGHTNESS].constraint_type = SANE_CONSTRAINT_RANGE;
  dev->opt[OPT_BRIGHTNESS].constraint.range = &brightness_range;
  dev->val[OPT_BRIGHTNESS].w = 0;	/* to get middle value */

  /* Enhancement group */
  dev->opt[OPT_ENHANCEMENT_GROUP].title = SANE_I18N ("Enhancement");
  dev->opt[OPT_ENHANCEMENT_GROUP].desc = "";	/* not valid for a group */
  dev->opt[OPT_ENHANCEMENT_GROUP].type = SANE_TYPE_GROUP;
  dev->opt[OPT_ENHANCEMENT_GROUP].cap = SANE_CAP_ADVANCED;
  dev->opt[OPT_ENHANCEMENT_GROUP].size = 0;
  dev->opt[OPT_ENHANCEMENT_GROUP].constraint_type = SANE_CONSTRAINT_NONE;

  /* red level calibration manual correction */
  dev->opt[OPT_WHITE_LEVEL_R].name = SANE_NAME_WHITE_LEVEL_R;
  dev->opt[OPT_WHITE_LEVEL_R].title = SANE_TITLE_WHITE_LEVEL_R;
  dev->opt[OPT_WHITE_LEVEL_R].desc = SANE_DESC_WHITE_LEVEL_R;
  dev->opt[OPT_WHITE_LEVEL_R].type = SANE_TYPE_INT;
  dev->opt[OPT_WHITE_LEVEL_R].unit = SANE_UNIT_NONE;
  dev->opt[OPT_WHITE_LEVEL_R].constraint_type = SANE_CONSTRAINT_RANGE;
  dev->opt[OPT_WHITE_LEVEL_R].constraint.range = &red_level_range;
  dev->val[OPT_WHITE_LEVEL_R].w = 00;	/* to get middle value */

  /* green level calibration manual correction */
  dev->opt[OPT_WHITE_LEVEL_G].name = SANE_NAME_WHITE_LEVEL_G;
  dev->opt[OPT_WHITE_LEVEL_G].title = SANE_TITLE_WHITE_LEVEL_G;
  dev->opt[OPT_WHITE_LEVEL_G].desc = SANE_DESC_WHITE_LEVEL_G;
  dev->opt[OPT_WHITE_LEVEL_G].type = SANE_TYPE_INT;
  dev->opt[OPT_WHITE_LEVEL_G].unit = SANE_UNIT_NONE;
  dev->opt[OPT_WHITE_LEVEL_G].constraint_type = SANE_CONSTRAINT_RANGE;
  dev->opt[OPT_WHITE_LEVEL_G].constraint.range = &green_level_range;
  dev->val[OPT_WHITE_LEVEL_G].w = 00;	/* to get middle value */

  /* blue level calibration manual correction */
  dev->opt[OPT_WHITE_LEVEL_B].name = SANE_NAME_WHITE_LEVEL_B;
  dev->opt[OPT_WHITE_LEVEL_B].title = SANE_TITLE_WHITE_LEVEL_B;
  dev->opt[OPT_WHITE_LEVEL_B].desc = SANE_DESC_WHITE_LEVEL_B;
  dev->opt[OPT_WHITE_LEVEL_B].type = SANE_TYPE_INT;
  dev->opt[OPT_WHITE_LEVEL_B].unit = SANE_UNIT_NONE;
  dev->opt[OPT_WHITE_LEVEL_B].constraint_type = SANE_CONSTRAINT_RANGE;
  dev->opt[OPT_WHITE_LEVEL_B].constraint.range = &blue_level_range;
  dev->val[OPT_WHITE_LEVEL_B].w = 00;	/* to get middle value */

  DBG (DBG_proc, "stv680_init_options: after blue level\n");

  /* Lastly, set the default scan mode. This might change some
   * values previously set here. */

  sane_control_option (dev, OPT_MODE, SANE_ACTION_SET_VALUE,
		       (SANE_String_Const *) scan_mode_list[0], NULL);
  DBG (DBG_proc, "stv680_init_options: exit\n");
}

/* Read the image from the vidcam and fill the temporary buffer with it. */
static SANE_Status
stv680_fill_image (Stv680_Vidcam * dev)
{
  SANE_Status status;
  size_t size;
  size_t bulk_size_read;

  assert (dev->image_begin == dev->image_end);
  assert (dev->real_bytes_left > 0);

  DBG (DBG_proc, "stv680_fill_image: enter\n");

  DBG (DBG_proc, "stv680_fill_image: real dev bytes left=0x%lx \n",
       (unsigned long) (size_t) dev->real_bytes_left);
  bulk_size_read = dev->real_bytes_left;

  while (dev->real_bytes_left)
    {
      /* Try to read the maximum number of bytes. */
      DBG (DBG_proc,
	   "stv680_fill_image: real dev bytes left, while loop=0x%lx \n",
	   (unsigned long) (size_t) dev->real_bytes_left);

      size = dev->real_bytes_left;
      if (size < bulk_size_read)
	{
	  size = bulk_size_read;	/* it seems size can not be smaller then read by bulk */
	}
      if (size == 0)
	{
	  /* Probably reached the end of the buffer. Check, just in case. */
	  assert (dev->image_end != 0);
	  return (SANE_STATUS_GOOD);
	}

      /* Do the transfer */

      DBG (DBG_proc,
	   "stv680_fill_image: dev->real_bytes_left: 0x%lx size: 0x%lx\n",
	   (unsigned long) (size_t) dev->real_bytes_left, (unsigned long) (size_t) size);
      usleep (3000);
      /* urb 44 first read bulk */

      status = sanei_usb_read_bulk (dev->fd, dev->buffer, &size);

      if (status != SANE_STATUS_GOOD)
	{
	  return status;
	}

      DBG (DBG_info,
	   "stv680_fill_image: size (read) = 0x%lx bytes (bpl=0x%lx)\n",
	   (unsigned long) (size_t) size, (unsigned long) (size_t) dev->params.bytes_per_line);

      memcpy (dev->image + dev->image_end, dev->buffer, size);

      dev->image_end += size;
      bulk_size_read = size;
      if (dev->real_bytes_left > size)
	dev->real_bytes_left -= size;
      else if (dev->real_bytes_left <= size)	/* last loop */
	dev->real_bytes_left = 0;
      DBG (DBG_info, "stv680_fill_image: real bytes left = 0x%lx\n",
	   (unsigned long) (size_t) dev->real_bytes_left);
    }
  /*    i = stv_sndctrl (0, dev, 0x80, 0, &window, 0x02); *//* Get Last Error */
/*	DBG (DBG_proc, "STV(i): last error: %i,  command = 0x%x", window[0], window[1]);
	return -1; */
/*
	}
	return 0;  */

  DBG (DBG_proc, "stv680_fill_image: exit\n");
  return (SANE_STATUS_GOOD);	/* unreachable */
}

#define MSG_MAXLEN   45
#define TEXT_CHAR_HEIGHT  11
#define TEXT_CHAR_WIDTH   6
#define CHAR_START   4

static SANE_Status
stv680_add_text (SANE_Byte * image, int width, int height, char *txt)
{
  SANE_Status status;
  time_t t;
  struct tm *tm;
  char line[MSG_MAXLEN + 1];
  SANE_Byte *ptr;
  int i, x, y, f, len;
  char fmtstring[25] = " %Y-%m-%d %H:%M:%S";
  char fmttxt[46];

  DBG (DBG_proc, "stv680_add_text: enter\n");
  time (&t);
  tm = localtime (&t);
  if (strlen (txt) > (MSG_MAXLEN - 23))
    strncpy (fmttxt, txt, (MSG_MAXLEN - 23));
  else
    strcpy (fmttxt, txt);
  strcat (fmttxt, fmtstring);

  len = strftime (line, MSG_MAXLEN, fmttxt, tm);

  for (y = 0; y < TEXT_CHAR_HEIGHT; y++)
    {
      ptr = image + 3 * width * (height - TEXT_CHAR_HEIGHT - 2 + y) + 12;

      for (x = 0; x < len; x++)
	{
      f = fontdata[line[x] * TEXT_CHAR_HEIGHT + y];
      for (i = TEXT_CHAR_WIDTH - 1; i >= 0; i--)
	    {
	      if (f & (CHAR_START << i))
		{
		  ptr[0] = 255;
		  ptr[1] = 255;
		  ptr[2] = 255;
		}
	      ptr += 3;
	    }			/* for i */
	}			/* for x */
    }				/* for y */

  DBG (DBG_proc, "stv680_add_text: exit vw=%d, vh=%d\n", width, height);
  status = (SANE_STATUS_GOOD);
  return status;

}

/* **************************  Video Decoding  *********************  */

static SANE_Status
stv680_bayer_unshuffle (Stv680_Vidcam * dev, SANE_Byte * buf, size_t * size)
{
  SANE_Status status;
  int x, y;
  int i = 0;
  int RED, GREEN, BLUE;
  int w = dev->cwidth;
  int vw = dev->x_resolution;
  int vh = dev->y_resolution;
  SANE_Byte p = 0;
  int colour = 0, bayer = 0;
  int bright_red;
  int bright_green;
  int bright_blue;
  int count;

  RED = dev->red_s;
  GREEN = dev->green_s;
  BLUE = dev->blue_s;

  DBG (DBG_proc, "stv680_bayer_unshuffle: enter\n");

#define AD(x, y, w) (((y)*(w)+(x))*3)

  DBG (DBG_proc,
       "stv680_bayer_unshuffle: color read RED=%d, GREEN=%d, BLUE=%d\n",
       RED, GREEN, BLUE);

  DBG (DBG_proc, "stv680_bayer_unshuffle: w=%d, vw=%d, vh=%d, len=0x%lx\n",
       w, vw, vh, (unsigned long) (size_t) size);

  for (y = 0; y < vh; y++)
    {
      for (x = 0; x < vw; x++)
	{
	  if (x & 1)
	    {
	      p = dev->image[y * w + (x >> 1)];
	    }
	  else
	    {
	      p = dev->image[y * w + (x >> 1) + (w >> 1)];
	    }
	  if (y & 1)
	    bayer = 2;
	  else
	    bayer = 0;
	  if (x & 1)
	    bayer++;

	  switch (bayer)
	    {
	    case 0:
	    case 3:
	      colour = 1;
	      break;
	    case 1:
	      colour = 0;
	      break;
	    case 2:
	      colour = 2;
	      break;
	    }
	  i = (y * vw + x) * 3;
	  *(dev->output + i + colour) = (SANE_Byte) p;
	}			/* for x */

    }				/* for y */

	/****** gamma correction plus hardcoded white balance */
  /* Correction values red[], green[], blue[], are generated by
     (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255.
     White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and
     converted to unsigned char. Values are in stv680.h  */
  if (dev->scan_mode == STV680_COLOR_RGB
      || dev->scan_mode == STV680_COLOR_RGB_TEXT)
    {
      for (y = 0; y < vh; y++)
	{
	  for (x = 0; x < vw; x++)
	    {
	      i = (y * vw + x) * 3;
	      *(dev->output + i) = red_g[*(dev->output + i)];
	      *(dev->output + i + 1) = green_g[*(dev->output + i + 1)];
	      *(dev->output + i + 2) = blue_g[*(dev->output + i + 2)];
	    }
	}
    }
  DBG (DBG_proc, "stv680_bayer_unshuffle: gamma correction done\n");

  if (dev->scan_mode != STV680_COLOR_RAW)
    {

	/******  bayer demosaic  ******/
      for (y = 1; y < (vh - 1); y++)
	{
	  for (x = 1; x < (vw - 1); x++)
	    {			/* work out pixel type */
	      if (y & 1)
		bayer = 0;
	      else
		bayer = 2;
	      if (!(x & 1))
		bayer++;
	      switch (bayer)
		{
		case 0:	/* green. blue lr, red tb */
		  *(dev->output + AD (x, y, vw) + BLUE) =
		    ((int) *(dev->output + AD (x - 1, y, vw) + BLUE) +
		     (int) *(dev->output + AD (x + 1, y, vw) + BLUE)) >> 1;
		  *(dev->output + AD (x, y, vw) + RED) =
		    ((int) *(dev->output + AD (x, y - 1, vw) + RED) +
		     (int) *(dev->output + AD (x, y + 1, vw) + RED)) >> 1;
		  break;

		case 1:	/* blue. green lrtb, red diagonals */
		  *(dev->output + AD (x, y, vw) + GREEN) =
		    ((int) *(dev->output + AD (x - 1, y, vw) + GREEN) +
		     (int) *(dev->output + AD (x + 1, y, vw) + GREEN) +
		     (int) *(dev->output + AD (x, y - 1, vw) + GREEN) +
		     (int) *(dev->output + AD (x, y + 1, vw) + GREEN)) >> 2;
		  *(dev->output + AD (x, y, vw) + RED) =
		    ((int) *(dev->output + AD (x - 1, y - 1, vw) + RED) +
		     (int) *(dev->output + AD (x - 1, y + 1, vw) + RED) +
		     (int) *(dev->output + AD (x + 1, y - 1, vw) + RED) +
		     (int) *(dev->output + AD (x + 1, y + 1, vw) + RED)) >> 2;
		  break;

		case 2:	/* red. green lrtb, blue diagonals */
		  *(dev->output + AD (x, y, vw) + GREEN) =
		    ((int) *(dev->output + AD (x - 1, y, vw) + GREEN) +
		     (int) *(dev->output + AD (x + 1, y, vw) + GREEN) +
		     (int) *(dev->output + AD (x, y - 1, vw) + GREEN) +
		     (int) *(dev->output + AD (x, y + 1, vw) + GREEN)) >> 2;
		  *(dev->output + AD (x, y, vw) + BLUE) =
		    ((int) *(dev->output + AD (x - 1, y - 1, vw) + BLUE) +
		     (int) *(dev->output + AD (x + 1, y - 1, vw) + BLUE) +
		     (int) *(dev->output + AD (x - 1, y + 1, vw) + BLUE) +
		     (int) *(dev->output + AD (x + 1, y + 1, vw) +
			     BLUE)) >> 2;
		  break;

		case 3:	/* green. red lr, blue tb */
		  *(dev->output + AD (x, y, vw) + RED) =
		    ((int) *(dev->output + AD (x - 1, y, vw) + RED) +
		     (int) *(dev->output + AD (x + 1, y, vw) + RED)) >> 1;
		  *(dev->output + AD (x, y, vw) + BLUE) =
		    ((int) *(dev->output + AD (x, y - 1, vw) + BLUE) +
		     (int) *(dev->output + AD (x, y + 1, vw) + BLUE)) >> 1;
		  break;
		}		/* switch */
	    }			/* for x */
	}			/* for y  - end demosaic  */
    }				/* no bayer demosaic */
  DBG (DBG_proc, "stv680_bayer_unshuffle: bayer demosaic done\n");

  /* fix top and bottom row, left and right side */
  i = vw * 3;
  memcpy (dev->output, (dev->output + i), i);

  memcpy ((dev->output + (vh * i)), (dev->output + ((vh - 1) * i)), i);


  for (y = 0; y < vh; y++)
    {
      i = y * vw * 3;
      memcpy ((dev->output + i), (dev->output + i + 3), 3);
      memcpy ((dev->output + i + (vw * 3)),
	      (dev->output + i + (vw - 1) * 3), 3);
    }

  /*  process all raw data, then trim to size if necessary */
  if (dev->subsample == 160)
    {
      i = 0;
      for (y = 0; y < vh; y++)
	{
	  if (!(y & 1))
	    {
	      for (x = 0; x < vw; x++)
		{
		  p = (y * vw + x) * 3;
		  if (!(x & 1))
		    {
		      *(dev->output + i) = *(dev->output + p);
		      *(dev->output + i + 1) = *(dev->output + p + 1);
		      *(dev->output + i + 2) = *(dev->output + p + 2);
		      i += 3;
		    }
		}		/* for x */
	    }
	}			/* for y */

      DBG (DBG_proc,
	   "stv680_bayer_unshuffle: if needed, trim to size 160 done\n");
    }
  /* reset to proper width */
  if ((dev->subsample == 160))
    {
      vw = 160;
      vh = 120;
    }

  /* brightness adjustment */

  count = vw * vh * 3;

  bright_red = (dev->val[OPT_BRIGHTNESS].w) + (dev->val[OPT_WHITE_LEVEL_R].w);
  bright_green =
    (dev->val[OPT_BRIGHTNESS].w) + (dev->val[OPT_WHITE_LEVEL_G].w);
  bright_blue =
    (dev->val[OPT_BRIGHTNESS].w) + (dev->val[OPT_WHITE_LEVEL_B].w);

  for (x = 0; x < count; x++)
    {
      y = x + 1;
      i = x + 2;
      if ((*(dev->output + x) + bright_red) >= 255)
	*(buf + x) = 255;

      else if ((*(dev->output + x) + bright_red) <= 0)
	*(buf + x) = 0;
      else
	*(buf + x) = (*(dev->output + x) + bright_red);

      if ((*(dev->output + y) + bright_green) >= 255)
	*(buf + y) = 255;

      else if ((*(dev->output + y) + bright_green) <= 0)
	*(buf + y) = 0;
      else
	*(buf + y) = (*(dev->output + y) + bright_green);

      if ((*(dev->output + i) + bright_blue) >= 255)
	*(buf + i) = 255;

      else if ((*(dev->output + i) + bright_blue) <= 0)
	*(buf + i) = 0;
      else
	*(buf + i) = (*(dev->output + i) + bright_blue);

      x += 2;
    }

  if (dev->scan_mode == STV680_COLOR_RGB_TEXT)
    {
      strcpy (dev->picmsg_ps, "STVcam ");

      status = stv680_add_text (buf, vw, vh, dev->picmsg_ps);
      if (status != SANE_STATUS_GOOD)
	{
	  DBG (DBG_info, "stv680_bayer_unshuffle status NOK\n");
	  return (status);
	}
    }

  DBG (DBG_proc, "stv680_bayer_unshuffle: exit vw=%d, vh=%d\n", vw, vh);
  status = (SANE_STATUS_GOOD);
  return status;
}

/* Sane entry points */

SANE_Status
sane_init (SANE_Int * version_code, SANE_Auth_Callback authorize)
{
  FILE *fp;
  char line[PATH_MAX];
  size_t len;

  num_devices = 0;
  devlist = NULL;
  first_dev = NULL;

  DBG_INIT ();

  DBG (DBG_sane_init, "sane_init\n");

  authorize = authorize;	/* silence gcc */

  DBG (DBG_error, "This is sane-stv680 version %d.%d-%d\n", SANE_CURRENT_MAJOR,
       SANE_CURRENT_MINOR, BUILD);
  DBG (DBG_error, "(C) 2004-2006 by Gerard Klaver\n");

  if (version_code)
    {
      *version_code = SANE_VERSION_CODE (SANE_CURRENT_MAJOR, SANE_CURRENT_MINOR, BUILD);
    }

  DBG (DBG_proc, "sane_init: authorize %s null\n", authorize ? "!=" : "==");

  sanei_usb_init ();

  fp = sanei_config_open (STV680_CONFIG_FILE);
  if (!fp)
    {
      /* No default vidcam? */
      DBG (DBG_warning, "configuration file not found (%s)\n",
	   STV680_CONFIG_FILE);

      return SANE_STATUS_GOOD;
    }

  while (sanei_config_read (line, sizeof (line), fp))
    {
      SANE_Word vendor;
      SANE_Word product;

      if (line[0] == '#')	/* ignore line comments */
	continue;
      len = strlen (line);

      if (!len)
	continue;		/* ignore empty lines */
      if (sscanf (line, "usb %i %i", &vendor, &product) == 2)
	{

	  sanei_usb_attach_matching_devices (line, attach_one);
	}
      else
	{
	  /* Garbage. Ignore. */
	  DBG (DBG_warning, "bad configuration line: \"%s\" - ignoring.\n",
	       line);
	}
    }

  fclose (fp);

  DBG (DBG_proc, "sane_init: leave\n");

  return SANE_STATUS_GOOD;
}

SANE_Status
sane_get_devices (const SANE_Device *** device_list, SANE_Bool local_only)
{
  Stv680_Vidcam *dev;
  int i;

  DBG (DBG_proc, "sane_get_devices: enter\n");

  local_only = local_only;	/* silence gcc */

  if (devlist)
    free (devlist);

  devlist = malloc ((num_devices + 1) * sizeof (devlist[0]));
  if (!devlist)
    return SANE_STATUS_NO_MEM;

  i = 0;
  for (dev = first_dev; i < num_devices; dev = dev->next)
    devlist[i++] = &dev->sane;
  devlist[i++] = 0;

  *device_list = devlist;

  DBG (DBG_proc, "sane_get_devices: exit\n");

  return SANE_STATUS_GOOD;
}

SANE_Status
sane_open (SANE_String_Const devicename, SANE_Handle * handle)
{
  Stv680_Vidcam *dev;
  SANE_Status status;

  DBG (DBG_proc, "sane_open: enter\n");

  /* search for devicename */
  if (devicename[0])
    {
      DBG (DBG_info, "sane_open: devicename=%s\n", devicename);

      for (dev = first_dev; dev; dev = dev->next)
	{
	  if (strcmp (dev->sane.name, devicename) == 0)
	    {
	      break;
	    }
	}

      if (!dev)
	{
	  status = attach_vidcam (devicename, &dev);
	  if (status != SANE_STATUS_GOOD)
	    {
	      return status;
	    }
	}
    }
  else
    {
      DBG (DBG_sane_info, "sane_open: no devicename, opening first device\n");
      dev = first_dev;		/* empty devicename -> use first device */
    }

  if (!dev)
    {
      DBG (DBG_error, "No vidcam found\n");

      return SANE_STATUS_INVAL;
    }

  stv680_init_options (dev);

  *handle = dev;

  DBG (DBG_proc, "sane_open: exit\n");

  return SANE_STATUS_GOOD;
}

const SANE_Option_Descriptor *
sane_get_option_descriptor (SANE_Handle handle, SANE_Int option)
{
  Stv680_Vidcam *dev = handle;

  DBG (DBG_proc, "sane_get_option_descriptor: enter, option %d\n", option);

  if ((unsigned) option >= OPT_NUM_OPTIONS)
    {
      return NULL;
    }

  DBG (DBG_proc, "sane_get_option_descriptor: exit\n");

  return dev->opt + option;
}

SANE_Status
sane_control_option (SANE_Handle handle, SANE_Int option,
		     SANE_Action action, void *val, SANE_Int * info)
{
  Stv680_Vidcam *dev = handle;
  SANE_Status status;
  SANE_Word cap;

  DBG (DBG_proc, "sane_control_option: enter, option %d, action %d\n",
       option, action);

  if (info)
    {
      *info = 0;
    }

  if (dev->scanning)
    {
      return SANE_STATUS_DEVICE_BUSY;
    }

  if (option < 0 || option >= OPT_NUM_OPTIONS)
    {
      return SANE_STATUS_INVAL;
    }

  cap = dev->opt[option].cap;
  if (!SANE_OPTION_IS_ACTIVE (cap))
    {
      return SANE_STATUS_INVAL;
    }

  if (action == SANE_ACTION_GET_VALUE)
    {

      switch (option)
	{
	  /* word options */
	case OPT_NUM_OPTS:
	case OPT_RESOLUTION:
	case OPT_BRIGHTNESS:
	case OPT_WHITE_LEVEL_R:
	case OPT_WHITE_LEVEL_G:
	case OPT_WHITE_LEVEL_B:
	  *(SANE_Word *) val = dev->val[option].w;
	  return SANE_STATUS_GOOD;
	case OPT_MODE:
	  strcpy (val, dev->val[option].s);
	  return SANE_STATUS_GOOD;
	default:
	  return SANE_STATUS_INVAL;
	}
    }
  else if (action == SANE_ACTION_SET_VALUE)
    {

      if (!SANE_OPTION_IS_SETTABLE (cap))
	{
	  DBG (DBG_error, "could not set option, not settable\n");
	  return SANE_STATUS_INVAL;
	}

      status = sanei_constrain_value (dev->opt + option, val, info);
      if (status != SANE_STATUS_GOOD)
	{
	  DBG (DBG_error, "could not set option, invalid value\n");
	  return status;
	}

      switch (option)
	{

	  /* Numeric side-effect options */
	case OPT_RESOLUTION:
	case OPT_BRIGHTNESS:
	case OPT_WHITE_LEVEL_R:
	case OPT_WHITE_LEVEL_G:
	case OPT_WHITE_LEVEL_B:
	  if (info)
	    {
	      *info |= SANE_INFO_RELOAD_PARAMS;
	    }
	  dev->val[option].w = *(SANE_Word *) val;
	  return SANE_STATUS_GOOD;

	  /* String side-effect options */
	case OPT_MODE:
	  if (strcmp (dev->val[option].s, val) == 0)
	    return SANE_STATUS_GOOD;

	  free (dev->val[OPT_MODE].s);
	  dev->val[OPT_MODE].s = (SANE_Char *) strdup (val);

	  dev->opt[OPT_WHITE_LEVEL_R].cap &= ~SANE_CAP_INACTIVE;
	  dev->opt[OPT_WHITE_LEVEL_G].cap &= ~SANE_CAP_INACTIVE;
	  dev->opt[OPT_WHITE_LEVEL_B].cap &= ~SANE_CAP_INACTIVE;

	  if (strcmp (dev->val[OPT_MODE].s, COLOR_RAW_STR) == 0)
	    {
	      dev->scan_mode = STV680_COLOR_RAW;
	    }
	  else if (strcmp (dev->val[OPT_MODE].s, COLOR_RGB_STR) == 0)
	    {
	      dev->scan_mode = STV680_COLOR_RGB;
	    }
	  else if (strcmp (dev->val[OPT_MODE].s, SANE_VALUE_SCAN_MODE_COLOR)
		   == 0)
	    {
	      dev->scan_mode = STV680_COLOR;

	    }
	  else if (strcmp (dev->val[OPT_MODE].s, COLOR_RGB_TEXT_STR) == 0)
	    {
	      dev->scan_mode = STV680_COLOR_RGB_TEXT;

	    }

	  /* The STV680 supports only a handful of resolution. */
	  /* This the default resolution range for the STV680 */

	  dev->depth = 8;
	  if (dev->resolutions_list != NULL)
	    {
	      int i;

	      dev->opt[OPT_RESOLUTION].constraint_type =
		SANE_CONSTRAINT_WORD_LIST;
	      dev->opt[OPT_RESOLUTION].constraint.word_list =
		dev->resolutions_list;

	      /* If the resolution isn't in the list, set a default. */
	      for (i = 1; i <= dev->resolutions_list[0]; i++)
		{
		  if (dev->resolutions_list[i] >= dev->val[OPT_RESOLUTION].w)
		    break;
		}
	      if (i > dev->resolutions_list[0])
		{
		  /* Too big. Take lowest. */
		  dev->val[OPT_RESOLUTION].w = dev->resolutions_list[1];
		}
	      else
		{
		  /* Take immediate superioir value. */
		  dev->val[OPT_RESOLUTION].w = dev->resolutions_list[i];
		}
	    }

	  /* String side-effect options */

	  if (info)
	    {
	      *info |= SANE_INFO_RELOAD_OPTIONS | SANE_INFO_RELOAD_PARAMS;
	    }
	  return SANE_STATUS_GOOD;
	default:
	  return SANE_STATUS_INVAL;
	}
    }

  DBG (DBG_proc, "sane_control_option: exit, bad\n");

  return SANE_STATUS_UNSUPPORTED;
}

SANE_Status
sane_get_parameters (SANE_Handle handle, SANE_Parameters * params)
{
  Stv680_Vidcam *dev = handle;
  int i;

  DBG (DBG_proc, "sane_get_parameters: enter\n");

  if (!(dev->scanning))
    {
      dev->x_resolution = dev->val[OPT_RESOLUTION].w;
      /* Prepare the parameters for the caller. */
      memset (&dev->params, 0, sizeof (SANE_Parameters));

      dev->params.last_frame = SANE_TRUE;

      switch (dev->scan_mode)
	{
	case STV680_COLOR_RAW:
	  dev->bytes_pixel = 1;	/* raw image is 422 code, 1 byte/pixel */
	  break;
	case STV680_COLOR_RGB:
	case STV680_COLOR_RGB_TEXT:
	case STV680_COLOR:
	  dev->bytes_pixel = 3;
	  break;
	}
      dev->params.format = SANE_FRAME_RGB;
      dev->params.pixels_per_line = dev->x_resolution;
      dev->params.bytes_per_line =
	dev->params.pixels_per_line * dev->bytes_pixel;
      dev->params.depth = 8;
      if (dev->resolutions_list != NULL)
	{
	  /* This vidcam has a fixed number of supported
	   * resolutions. Find the color sequence for that
	   * resolution. */

	  for (i = 0;
	       dev->hw->color_adjust[i].resolution_x != dev->x_resolution;
	       i++);

	  dev->red_s = dev->hw->color_adjust[i].z1_color_0;
	  dev->green_s = dev->hw->color_adjust[i].z1_color_1;
	  dev->blue_s = dev->hw->color_adjust[i].z1_color_2;
	  dev->y_resolution = dev->hw->color_adjust[i].resolution_y;
	}
      dev->subsample = 0;
      switch (dev->val[OPT_RESOLUTION].w)
	{
	case 176:
	  dev->video_mode = 0x0200;
	  dev->cwidth = dev->x_resolution + 2;
	  dev->cheight = dev->y_resolution + 2;
	  break;
	case 160:		/* 160x120 subsampled */
	  dev->x_resolution = 320;
	  dev->y_resolution = 240;
	  dev->video_mode = 0x0300;
	  dev->cwidth = dev->x_resolution + 2;
	  dev->cheight = dev->y_resolution + 2;
	  dev->subsample = 160;
	  break;
	case 320:
	  dev->video_mode = 0x0300;
	  dev->cwidth = dev->x_resolution + 2;
	  dev->cheight = dev->y_resolution + 2;
	  break;
	case 352:
	  dev->video_mode = 0x0000;
	  dev->cwidth = dev->x_resolution + 4;
	  dev->cheight = dev->y_resolution + 4;
	  break;
	case 640:
	  dev->video_mode = 0x0100;
	  dev->cwidth = dev->x_resolution + 4;
	  dev->cheight = dev->y_resolution + 4;
	  break;
	}
      dev->params.pixels_per_line = dev->x_resolution;
      dev->params.lines = dev->y_resolution;
      DBG (DBG_info, "sane_get_parameters: x=%d, y=%d\n", dev->x_resolution,
	   dev->y_resolution);
    }

  /* Return the current values. */
  if (params)
    {
      *params = (dev->params);
    }

  DBG (DBG_proc, "sane_get_parameters: exit\n");

  return SANE_STATUS_GOOD;
}

SANE_Status
sane_start (SANE_Handle handle)
{
  Stv680_Vidcam *dev = handle;
  SANE_Status status;

  DBG (DBG_proc, "sane_start: enter\n");

  if (!(dev->scanning))
    {
      sane_get_parameters (dev, NULL);

      /* Open again the vidcam  */
      if (sanei_usb_open (dev->devicename, &(dev->fd)) != 0)
	{
	  DBG (DBG_error, "ERROR: sane_start: open failed\n");
	  return SANE_STATUS_INVAL;
	}

      /* Initialize the vidcam. */
      status = stv680_vidcam_init (dev);
      if (status)
	{
	  DBG (DBG_error, "ERROR: failed to init the vidcam\n");
	  stv680_close (dev);
	  return status;
	}

    }

  dev->image_end = 0;
  dev->image_begin = 0;
  /* real_byte_left is bulk read bytes, bytes_left is frontend buffer bytes */
  dev->real_bytes_left = dev->cwidth * dev->cheight;
  dev->bytes_left = dev->params.bytes_per_line * dev->params.lines;

  dev->scanning = SANE_TRUE;

  DBG (DBG_proc, "sane_start: exit\n");

  return SANE_STATUS_GOOD;
}

SANE_Status
sane_read (SANE_Handle handle, SANE_Byte * buf, SANE_Int max_len,
	   SANE_Int * len)
{
  SANE_Status status;
  Stv680_Vidcam *dev = handle;
  size_t size;

  DBG (DBG_proc, "sane_read: enter\n");

  *len = 0;
  if (dev->deliver_eof)
    {
      dev->deliver_eof = 0;
      return SANE_STATUS_EOF;
    }

  if (!(dev->scanning))
    {
      /* OOPS, not scanning, stop a scan. */
      stv680_reset_vidcam (dev);
      stv680_close (dev);
      dev->scanning = SANE_FALSE;
      return SANE_STATUS_CANCELLED;
    }

  if (dev->bytes_left <= 0)
    {
      return (SANE_STATUS_EOF);
    }

  if (dev->image_begin == dev->image_end)
    {
      /* Fill image */
      status = stv680_fill_image (dev);
      if (status != SANE_STATUS_GOOD)
	{
	  DBG (DBG_info, "sane_read: stv680_fill_image status NOK\n");
	  return (status);
	}
    }

  /* Something must have been read */
  if (dev->image_begin == dev->image_end)
    {
      DBG (DBG_info, "sane_read: nothing read\n");
      return SANE_STATUS_IO_ERROR;
    }

  size = dev->bytes_left;
  if (((unsigned int) max_len) < size)
    {
      DBG (DBG_error, "sane_read: max_len < size\n");
      return (SANE_FALSE);
    }
  if ((dev->image_end - dev->image_begin) > size)
    {
      size = dev->image_end - dev->image_begin;
      DBG (DBG_proc, "sane_read: size < dev->image_end - dev->image_begin\n");
    }
  /* diff between size an dev->bytes_left because of 356/352 and 292/288 */
  DBG (DBG_info, "sane_read: size =0x%lx bytes, max_len=0x%lx bytes\n",
       (unsigned long) (size_t) size, (unsigned long) (size_t) max_len);

  *len = dev->bytes_left;	/* needed */
  size = dev->bytes_left;
  dev->bytes_left = 0;		/* needed for frontend or ? */

  if (dev->scan_mode != STV680_COLOR_RAW)
    {
      /* do bayer unshuffle  after complete frame is read */
      status = stv680_bayer_unshuffle (dev, buf, &size);
      if (status != SANE_STATUS_GOOD)
	{
	  DBG (DBG_info, "sane_read: stv680_bayer_unshuffle status NOK\n");
	  return (status);
	}
    }
  else
    {
      /* Copy the raw data to the frontend buffer. */
      memcpy (buf, dev->image, size);
      DBG (DBG_info, "sane_read: raw mode\n");
    }
  DBG (DBG_info, "sane_read: exit\n");
  status = SANE_STATUS_GOOD;
  return status;
}

SANE_Status
sane_set_io_mode (SANE_Handle handle, SANE_Bool non_blocking)
{

  DBG (DBG_proc, "sane_set_io_mode: enter\n");

  handle = handle;		/* silence gcc */
  non_blocking = non_blocking;	/* silence gcc */


  DBG (DBG_proc, "sane_set_io_mode: exit\n");

  return SANE_STATUS_UNSUPPORTED;
}

SANE_Status
sane_get_select_fd (SANE_Handle handle, SANE_Int * fd)
{
  DBG (DBG_proc, "sane_get_select_fd: enter\n");

  handle = handle;		/* silence gcc */
  fd = fd;			/* silence gcc */

  DBG (DBG_proc, "sane_get_select_fd: exit\n");

  return SANE_STATUS_UNSUPPORTED;
}

void
sane_cancel (SANE_Handle handle)
{
  Stv680_Vidcam *dev = handle;

  DBG (DBG_proc, "sane_cancel: enter\n");

  /* Stop a scan. */
  if (dev->scanning == SANE_TRUE)
    {
      /* Reset the vidcam */
      stv680_reset_vidcam (dev);
      stv680_close (dev);
    }
  dev->scanning = SANE_FALSE;
  dev->deliver_eof = 0;

  /* return SANE_STATUS_CANCELLED; */
  DBG (DBG_proc, "sane_cancel: exit\n");
}

void
sane_close (SANE_Handle handle)
{
  Stv680_Vidcam *dev = handle;
  Stv680_Vidcam *dev_tmp;

  DBG (DBG_proc, "sane_close: enter\n");

/* Stop a scan. */

  if (dev->scanning == SANE_TRUE)
    {
      stv680_reset_vidcam (dev);
      stv680_close (dev);
    }
  dev->scanning = SANE_FALSE;

  /* Unlink dev. */
  if (first_dev == dev)
    {
      first_dev = dev->next;
    }
  else
    {
      dev_tmp = first_dev;
      while (dev_tmp->next && dev_tmp->next != dev)
	{
	  dev_tmp = dev_tmp->next;
	}
      if (dev_tmp->next != NULL)
	{
	  dev_tmp->next = dev_tmp->next->next;
	}
    }

  stv680_free (dev);
  num_devices--;

  DBG (DBG_proc, "sane_close: exit\n");
}

void
sane_exit (void)
{
  DBG (DBG_proc, "sane_exit: enter\n");

  while (first_dev)
    {
      sane_close (first_dev);
    }

  if (devlist)
    {
      free (devlist);
      devlist = NULL;
    }

  DBG (DBG_proc, "sane_exit: exit\n");
}