Description: Correct source typos
Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
Last-Update: 2016-04-14
----
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
Index: trunk/backend/hp-scl.c
===================================================================
--- trunk.orig/backend/hp-scl.c
+++ trunk/backend/hp-scl.c
@@ -2083,7 +2083,7 @@ hp_scl_strerror (int errnum)
case 1024: return "ADF Paper Jam";
case 1025: return "Home Position Missing";
case 1026: return "Paper Not Loaded";
- default: return "??Unkown Error??";
+ default: return "??Unknown Error??";
}
}
Index: trunk/backend/coolscan.c
===================================================================
--- trunk.orig/backend/coolscan.c
+++ trunk/backend/coolscan.c
@@ -238,7 +238,7 @@ request_sense_parse (unsigned char *sens
case 0x6:
if ((0x29 == asc) && (0x0 == ascq))
- DBG (1, "\t%d/%d/%d: Power On, Reset, or Bus Device Reset Occured\n", sense, asc, ascq);
+ DBG (1, "\t%d/%d/%d: Power On, Reset, or Bus Device Reset Occurred\n", sense, asc, ascq);
else if ((0x2a == asc) && (0x1 == ascq))
DBG (1, "\t%d/%d/%d: Mode Parameters Changed\n", sense, asc, ascq);
else
Index: trunk/backend/as6e.c
===================================================================
--- trunk.orig/backend/as6e.c
+++ trunk/backend/as6e.c
@@ -577,7 +577,7 @@ as6e_open (AS6E_Scan * s)
outpipe_desc, datapipe_desc, (char *) 0);
DBG (1, "The SANE backend was unable to start \"as6edriver\".\n");
DBG (1, "This must be installed in a driectory in your PATH.\n");
- DBG (1, "To aquire the as6edriver program,\n");
+ DBG (1, "To acquire the as6edriver program,\n");
DBG (1, "go to http://as6edriver.sourceforge.net.\n");
write (ctlinpipe[WRITEPIPE], &exec_result, sizeof (exec_result));
exit (-1);
Index: trunk/backend/fujitsu.c
===================================================================
--- trunk.orig/backend/fujitsu.c
+++ trunk/backend/fujitsu.c
@@ -1720,7 +1720,7 @@ init_vpd (struct fujitsu *s)
DBG (15, " sync next feed: %d\n", get_IN_sync_next_feed(in));
s->has_op_halt = get_IN_op_halt(in);
- DBG (15, " object postion halt: %d\n", s->has_op_halt);
+ DBG (15, " object position halt: %d\n", s->has_op_halt);
}
ret = SANE_STATUS_GOOD;
Index: trunk/backend/genesys_gl646.c
===================================================================
--- trunk.orig/backend/genesys_gl646.c
+++ trunk/backend/genesys_gl646.c
@@ -1999,7 +1999,7 @@ gl646_set_fe (Genesys_Device * dev, uint
/* Wolfson type frontend */
if ((dev->reg[reg_0x04].value & REG04_FESET) != 0x03)
{
- DBG (DBG_proc, "gl646_set_fe(): unspported frontend type %d\n",
+ DBG (DBG_proc, "gl646_set_fe(): unsupported frontend type %d\n",
dev->reg[reg_0x04].value & REG04_FESET);
return SANE_STATUS_UNSUPPORTED;
}
Index: trunk/backend/hs2p-scsi.c
===================================================================
--- trunk.orig/backend/hs2p-scsi.c
+++ trunk/backend/hs2p-scsi.c
@@ -373,7 +373,7 @@ print_sense_data (int dbg_level, SENSE_D
(data->sense_key & 0x0F));
DBG (dbg_level, "Information Byte = %lu\n", _4btol (data->information));
DBG (dbg_level, "Additional Sense Length = %d\n", data->sense_length);
- DBG (dbg_level, "Command Specific Infomation = %lu\n",
+ DBG (dbg_level, "Command Specific Information = %lu\n",
_4btol (data->command_specific_information));
DBG (dbg_level, "Additional Sense Code = %#x\n", data->sense_code);
DBG (dbg_level, "Additional Sense Code Qualifier = %#x\n",
Index: trunk/backend/microtek2.c
===================================================================
--- trunk.orig/backend/microtek2.c
+++ trunk/backend/microtek2.c
@@ -5152,7 +5152,7 @@ scsi_sense_handler (int fd, u_char *sens
else if ( asc == 0x3d && ascq == 0x00)
DBG(5, "scsi_sense_handler: Invalid bit in IDENTIFY\n");
else if ( asc == 0x2c && ascq == 0x02 )
-/* Ok */ DBG(5, "scsi_sense_handler: Invalid comb. of windows specfied\n");
+/* Ok */ DBG(5, "scsi_sense_handler: Invalid comb. of windows specified\n");
else if ( asc == 0x20 && ascq == 0x00 )
/* Ok */ DBG(5, "scsi_sense_handler: Invalid command opcode\n");
else if ( asc == 0x24 && ascq == 0x00 )
Index: trunk/sanei/sanei_pa4s2.c
===================================================================
--- trunk.orig/sanei/sanei_pa4s2.c
+++ trunk/sanei/sanei_pa4s2.c
@@ -309,7 +309,7 @@ pa4s2_init (SANE_Status *status)
if (first_time == SANE_FALSE)
{
- DBG (5, "pa4s2_init: sanei already initalized\n");
+ DBG (5, "pa4s2_init: sanei already initialized\n");
status = SANE_STATUS_GOOD;
return 0;
}
Index: trunk/sanei/sanei_pp.c
===================================================================
--- trunk.orig/sanei/sanei_pp.c
+++ trunk/sanei/sanei_pp.c
@@ -697,7 +697,7 @@ pp_init( void )
#endif
if( first_time == SANE_FALSE ) {
- DBG( 5, "pp_init: already initalized\n" );
+ DBG( 5, "pp_init: already initialized\n" );
return SANE_STATUS_GOOD;
}
Index: trunk/backend/mustek_usb2_asic.c
===================================================================
--- trunk.orig/backend/mustek_usb2_asic.c
+++ trunk/backend/mustek_usb2_asic.c
@@ -4318,7 +4318,7 @@ Asic_SetSource (PAsic chip, LIGHTSOURCE
DBG (DBG_ASIC, "Asic_SetSource: Source is Reflect\n");
break;
case 2:
- DBG (DBG_ASIC, "Asic_SetSource: Source is Postion\n");
+ DBG (DBG_ASIC, "Asic_SetSource: Source is Position\n");
break;
case 4:
DBG (DBG_ASIC, "Asic_SetSource: Source is Negtive\n");
Index: trunk/backend/rts8891.c
===================================================================
--- trunk.orig/backend/rts8891.c
+++ trunk/backend/rts8891.c
@@ -7702,7 +7702,7 @@ park_head (struct Rts8891_Device *dev, S
sanei_rts88xx_read_reg (dev->devnum, CONTROLER_REG, ®);
if (reg != 0x20)
{
- DBG (DBG_warn, "park_head: unexpected controler value 0x%02x\n", reg);
+ DBG (DBG_warn, "park_head: unexpected controller value 0x%02x\n", reg);
}
/* head parking */
Index: trunk/backend/rts88xx_lib.c
===================================================================
--- trunk.orig/backend/rts88xx_lib.c
+++ trunk/backend/rts88xx_lib.c
@@ -686,7 +686,7 @@ sanei_rts88xx_setup_nvram (SANE_Int devn
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
- "sanei_rts88xx_setup_nvram : controler register write failed\n");
+ "sanei_rts88xx_setup_nvram : controller register write failed\n");
return status;
}
reg = 1;
@@ -694,7 +694,7 @@ sanei_rts88xx_setup_nvram (SANE_Int devn
if (status != SANE_STATUS_GOOD)
{
DBG (DBG_error,
- "sanei_rts88xx_setup_nvram : controler register write failed\n");
+ "sanei_rts88xx_setup_nvram : controller register write failed\n");
return status;
}
return status;
Index: trunk/backend/sharp.c
===================================================================
--- trunk.orig/backend/sharp.c
+++ trunk/backend/sharp.c
@@ -370,7 +370,7 @@ sense_handler(int __sane_unused__ fd, u_
DBG(10, "error: invalid field in parameter list\n");
return SANE_STATUS_IO_ERROR;
case 0x29:
- DBG(10, "note: reset occured\n");
+ DBG(10, "note: reset occurred\n");
return SANE_STATUS_GOOD;
case 0x2a:
DBG(10, "note: mode parameter change\n");
@@ -495,7 +495,7 @@ sense_handler(int __sane_unused__ fd, u_
switch (add_sense_code)
{
case 0x29:
- DBG(5, "unit attention: reset occured\n");
+ DBG(5, "unit attention: reset occurred\n");
return SANE_STATUS_GOOD;
case 0x2a:
DBG(5, "unit attention: parameter changed by "