From bfca57fb52ab7101f701560a2e6feb3a388ef5bf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Frings-F=C3=BCrst?= Date: Wed, 24 Aug 2016 04:12:59 +0200 Subject: Imported Upstream version 3.21.90 --- m4/appstream-xml.m4 | 86 ++++++ m4/gettext.m4 | 405 +++++++++++++++++++++++++++ m4/iconv.m4 | 271 ++++++++++++++++++ m4/intlmacosx.m4 | 56 ++++ m4/intltool.m4 | 212 -------------- m4/lib-ld.m4 | 119 ++++++++ m4/lib-link.m4 | 777 ++++++++++++++++++++++++++++++++++++++++++++++++++++ m4/lib-prefix.m4 | 224 +++++++++++++++ m4/po.m4 | 453 ++++++++++++++++++++++++++++++ m4/progtest.m4 | 91 ++++++ m4/yelp.m4 | 8 +- 11 files changed, 2489 insertions(+), 213 deletions(-) create mode 100644 m4/appstream-xml.m4 create mode 100644 m4/gettext.m4 create mode 100644 m4/iconv.m4 create mode 100644 m4/intlmacosx.m4 delete mode 100644 m4/intltool.m4 create mode 100644 m4/lib-ld.m4 create mode 100644 m4/lib-link.m4 create mode 100644 m4/lib-prefix.m4 create mode 100644 m4/po.m4 create mode 100644 m4/progtest.m4 (limited to 'm4') diff --git a/m4/appstream-xml.m4 b/m4/appstream-xml.m4 new file mode 100644 index 0000000..1472802 --- /dev/null +++ b/m4/appstream-xml.m4 @@ -0,0 +1,86 @@ +# appstream-xml.m4 +# +# serial 6 + +dnl APPSTREAM_XML +dnl Installs and validates AppData XML files. +dnl +dnl Call APPSTREAM_XML in configure.ac to check for the appstream-util tool. +dnl Add @APPSTREAM_XML_RULES@ to a Makefile.am to substitute the make rules. Add +dnl .appdata.xml files to appstream_XML in Makefile.am and they will be validated +dnl at make check time, if appstream-util is installed, as well as installed +dnl to the correct location automatically. Add --enable-appstream-util to +dnl DISTCHECK_CONFIGURE_FLAGS in Makefile.am to require valid AppData XML when +dnl doing a distcheck. +dnl +dnl Adding files to appstream_XML does not distribute them automatically. + +AC_DEFUN([APPSTREAM_XML], +[ + m4_pattern_allow([AM_V_GEN]) + AC_ARG_ENABLE([appstream-util], + [AS_HELP_STRING([--disable-appstream-util], + [Disable validating AppData XML files during check phase])]) + + AS_IF([test "x$enable_appstream_validate" != "xno"], + [AC_PATH_PROG([APPSTREAM_UTIL], [appstream-util]) + AS_IF([test "x$APPSTREAM_UTIL" = "x"], + [have_appstream_validate=no], + [have_appstream_validate=yes + AC_SUBST([APPSTREAM_UTIL])])], + [have_appstream_validate=no]) + + AS_IF([test "x$have_appstream_validate" != "xno"], + [appstream_validate=yes], + [appstream_validate=no + AS_IF([test "x$enable_appstream_validate" = "xyes"], + [AC_MSG_ERROR([AppData validation was requested but appstream-util was not found])])]) + + AC_SUBST([appstreamxmldir], [${datadir}/appdata]) + + APPSTREAM_XML_RULES=' +.PHONY : uninstall-appstream-xml install-appstream-xml clean-appstream-xml + +mostlyclean-am: clean-appstream-xml + +%.appdata.valid: %.appdata.xml + $(AM_V_GEN) if test -f "$<"; then d=; else d="$(srcdir)/"; fi; \ + if test -n "$(APPSTREAM_UTIL)"; \ + then $(APPSTREAM_UTIL) --nonet validate $${d}$<; fi \ + && touch [$]@ + +check-am: $(appstream_XML:.appdata.xml=.appdata.valid) +uninstall-am: uninstall-appstream-xml +install-data-am: install-appstream-xml + +.SECONDARY: $(appstream_XML) + +install-appstream-xml: $(appstream_XML) + @$(NORMAL_INSTALL) + if test -n "$^"; then \ + test -z "$(appstreamxmldir)" || $(MKDIR_P) "$(DESTDIR)$(appstreamxmldir)"; \ + $(INSTALL_DATA) $^ "$(DESTDIR)$(appstreamxmldir)"; \ + fi + +uninstall-appstream-xml: + @$(NORMAL_UNINSTALL) + @list='\''$(appstream_XML)'\''; test -n "$(appstreamxmldir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '\''$(DESTDIR)$(appstreamxmldir)'\'' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(appstreamxmldir)" && rm -f $$files + +clean-appstream-xml: + rm -f $(appstream_XML:.appdata.xml=.appdata.valid) +' + _APPSTREAM_XML_SUBST(APPSTREAM_XML_RULES) +]) + +dnl _APPSTREAM_XML_SUBST(VARIABLE) +dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST +AC_DEFUN([_APPSTREAM_XML_SUBST], +[ +AC_SUBST([$1]) +m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) +] +) diff --git a/m4/gettext.m4 b/m4/gettext.m4 new file mode 100644 index 0000000..da31efe --- /dev/null +++ b/m4/gettext.m4 @@ -0,0 +1,405 @@ +# gettext.m4 serial 67 (gettext-0.19.6) +dnl Copyright (C) 1995-2014 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2006, 2008-2010. + +dnl Macro to add for using GNU gettext. + +dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). +dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The +dnl default (if it is not specified or empty) is 'no-libtool'. +dnl INTLSYMBOL should be 'external' for packages with no intl directory, +dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. +dnl If INTLSYMBOL is 'use-libtool', then a libtool library +dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, +dnl depending on --{enable,disable}-{shared,static} and on the presence of +dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library +dnl $(top_builddir)/intl/libintl.a will be created. +dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext +dnl implementations (in libc or libintl) without the ngettext() function +dnl will be ignored. If NEEDSYMBOL is specified and is +dnl 'need-formatstring-macros', then GNU gettext implementations that don't +dnl support the ISO C 99 formatstring macros will be ignored. +dnl INTLDIR is used to find the intl libraries. If empty, +dnl the value '$(top_builddir)/intl/' is used. +dnl +dnl The result of the configuration is one of three cases: +dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled +dnl and used. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 2) GNU gettext has been found in the system's C library. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 3) No internationalization, always use English msgid. +dnl Catalog format: none +dnl Catalog extension: none +dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. +dnl The use of .gmo is historical (it was needed to avoid overwriting the +dnl GNU format catalogs when building on a platform with an X/Open gettext), +dnl but we keep it in order not to force irrelevant filename changes on the +dnl maintainers. +dnl +AC_DEFUN([AM_GNU_GETTEXT], +[ + dnl Argument checking. + ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , + [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT +])])])])]) + ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], + [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) + ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , + [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT +])])])]) + define([gt_included_intl], + ifelse([$1], [external], + ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), + [yes])) + define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) + gt_NEEDS_INIT + AM_GNU_GETTEXT_NEED([$2]) + + AC_REQUIRE([AM_PO_SUBDIRS])dnl + ifelse(gt_included_intl, yes, [ + AC_REQUIRE([AM_INTL_SUBDIR])dnl + ]) + + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Sometimes libintl requires libiconv, so first search for libiconv. + dnl Ideally we would do this search only after the + dnl if test "$USE_NLS" = "yes"; then + dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT + dnl the configure script would need to contain the same shell code + dnl again, outside any 'if'. There are two solutions: + dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. + dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. + dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not + dnl documented, we avoid it. + ifelse(gt_included_intl, yes, , [ + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + ]) + + dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation. + gt_INTL_MACOSX + + dnl Set USE_NLS. + AC_REQUIRE([AM_NLS]) + + ifelse(gt_included_intl, yes, [ + BUILD_INCLUDED_LIBINTL=no + USE_INCLUDED_LIBINTL=no + ]) + LIBINTL= + LTLIBINTL= + POSUB= + + dnl Add a version number to the cache macros. + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + dnl If we use NLS figure out what method + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + ifelse(gt_included_intl, yes, [ + AC_MSG_CHECKING([whether included gettext is requested]) + AC_ARG_WITH([included-gettext], + [ --with-included-gettext use the GNU gettext library included here], + nls_cv_force_use_gnu_gettext=$withval, + nls_cv_force_use_gnu_gettext=no) + AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + ]) + dnl User does not insist on using GNU NLS library. Figure out what + dnl to use. If GNU gettext is available we use this. Else we have + dnl to fall back to GNU NLS library. + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], + [AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings; + ]], + [[ +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings + ]])], + [eval "$gt_func_gnugettext_libc=yes"], + [eval "$gt_func_gnugettext_libc=no"])]) + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + dnl Sometimes libintl requires libiconv, so first search for libiconv. + ifelse(gt_included_intl, yes, , [ + AM_ICONV_LINK + ]) + dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL + dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) + dnl because that would add "-liconv" to LIBINTL and LTLIBINTL + dnl even if libiconv doesn't exist. + AC_LIB_LINKFLAGS_BODY([intl]) + AC_CACHE_CHECK([for GNU gettext in libintl], + [$gt_func_gnugettext_libintl], + [gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + dnl Now see whether libintl exists and does not depend on libiconv. + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); + ]], + [[ +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + ]])], + [eval "$gt_func_gnugettext_libintl=yes"], + [eval "$gt_func_gnugettext_libintl=no"]) + dnl Now see whether libintl exists and depends on libiconv. + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); + ]], + [[ +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + ]])], + [LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + eval "$gt_func_gnugettext_libintl=yes" + ]) + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS"]) + fi + + dnl If an already present or preinstalled GNU gettext() is found, + dnl use it. But if this macro is used in GNU gettext, and GNU + dnl gettext is already preinstalled in libintl, we update this + dnl libintl. (Cf. the install rule in intl/Makefile.in.) + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ + || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + dnl Reset the values set by searching for libintl. + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + ifelse(gt_included_intl, yes, [ + if test "$gt_use_preinstalled_gnugettext" != "yes"; then + dnl GNU gettext is not found in the C library. + dnl Fall back on included GNU gettext library. + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions used to generate GNU NLS library. + BUILD_INCLUDED_LIBINTL=yes + USE_INCLUDED_LIBINTL=yes + LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" + LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" + LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` + fi + + CATOBJEXT= + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions to use GNU gettext tools. + CATOBJEXT=.gmo + fi + ]) + + if test -n "$INTL_MACOSX_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Some extra flags are needed during linking. + LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + AC_DEFINE([ENABLE_NLS], [1], + [Define to 1 if translation of program messages to the user's native language + is requested.]) + else + USE_NLS=no + fi + fi + + AC_MSG_CHECKING([whether to use NLS]) + AC_MSG_RESULT([$USE_NLS]) + if test "$USE_NLS" = "yes"; then + AC_MSG_CHECKING([where the gettext function comes from]) + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + AC_MSG_RESULT([$gt_source]) + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + AC_MSG_CHECKING([how to link with libintl]) + AC_MSG_RESULT([$LIBINTL]) + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) + fi + + dnl For backward compatibility. Some packages may be using this. + AC_DEFINE([HAVE_GETTEXT], [1], + [Define if the GNU gettext() function is already present or preinstalled.]) + AC_DEFINE([HAVE_DCGETTEXT], [1], + [Define if the GNU dcgettext() function is already present or preinstalled.]) + fi + + dnl We need to process the po/ directory. + POSUB=po + fi + + ifelse(gt_included_intl, yes, [ + dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL + dnl to 'yes' because some of the testsuite requires it. + if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then + BUILD_INCLUDED_LIBINTL=yes + fi + + dnl Make all variables we use known to autoconf. + AC_SUBST([BUILD_INCLUDED_LIBINTL]) + AC_SUBST([USE_INCLUDED_LIBINTL]) + AC_SUBST([CATOBJEXT]) + + dnl For backward compatibility. Some configure.ins may be using this. + nls_cv_header_intl= + nls_cv_header_libgt= + + dnl For backward compatibility. Some Makefiles may be using this. + DATADIRNAME=share + AC_SUBST([DATADIRNAME]) + + dnl For backward compatibility. Some Makefiles may be using this. + INSTOBJEXT=.mo + AC_SUBST([INSTOBJEXT]) + + dnl For backward compatibility. Some Makefiles may be using this. + GENCAT=gencat + AC_SUBST([GENCAT]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLOBJS= + if test "$USE_INCLUDED_LIBINTL" = yes; then + INTLOBJS="\$(GETTOBJS)" + fi + AC_SUBST([INTLOBJS]) + + dnl Enable libtool support if the surrounding package wishes it. + INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix + AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) + ]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLLIBS="$LIBINTL" + AC_SUBST([INTLLIBS]) + + dnl Make all documented variables known to autoconf. + AC_SUBST([LIBINTL]) + AC_SUBST([LTLIBINTL]) + AC_SUBST([POSUB]) +]) + + +dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. +m4_define([gt_NEEDS_INIT], +[ + m4_divert_text([DEFAULTS], [gt_needs=]) + m4_define([gt_NEEDS_INIT], []) +]) + + +dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) +AC_DEFUN([AM_GNU_GETTEXT_NEED], +[ + m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) +]) + + +dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) +AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) + + +dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version]) +AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], []) diff --git a/m4/iconv.m4 b/m4/iconv.m4 new file mode 100644 index 0000000..4e37363 --- /dev/null +++ b/m4/iconv.m4 @@ -0,0 +1,271 @@ +# iconv.m4 serial 19 (gettext-0.18.2) +dnl Copyright (C) 2000-2002, 2007-2014 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], +[ + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([iconv]) +]) + +AC_DEFUN([AM_ICONV_LINK], +[ + dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and + dnl those with the standalone portable GNU libiconv installed). + AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + + dnl Add $INCICONV to CPPFLAGS before performing the following checks, + dnl because if the user has installed libiconv and not disabled its use + dnl via --without-libiconv-prefix, he wants to use it. The first + dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed. + am_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) + + AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +#include + ]], + [[iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);]])], + [am_cv_func_iconv=yes]) + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +#include + ]], + [[iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);]])], + [am_cv_lib_iconv=yes] + [am_cv_func_iconv=yes]) + LIBS="$am_save_LIBS" + fi + ]) + if test "$am_cv_func_iconv" = yes; then + AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ + dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11, + dnl Solaris 10. + am_save_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + am_cv_func_iconv_works=no + for ac_iconv_const in '' 'const'; do + AC_RUN_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +#include + +#ifndef ICONV_CONST +# define ICONV_CONST $ac_iconv_const +#endif + ]], + [[int result = 0; + /* Test against AIX 5.1 bug: Failures are not distinguishable from successful + returns. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 1; + iconv_close (cd_utf8_to_88591); + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\263"; + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 2; + iconv_close (cd_ascii_to_88591); + } + } + /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304"; + static char buf[2] = { (char)0xDE, (char)0xAD }; + ICONV_CONST char *inptr = input; + size_t inbytesleft = 1; + char *outptr = buf; + size_t outbytesleft = 1; + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) + result |= 4; + iconv_close (cd_88591_to_utf8); + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + result |= 8; + iconv_close (cd_88591_to_utf8); + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + if (/* Try standardized names. */ + iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) + /* Try IRIX, OSF/1 names. */ + && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) + /* Try AIX names. */ + && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) + /* Try HP-UX names. */ + && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) + result |= 16; + return result; +]])], + [am_cv_func_iconv_works=yes], , + [case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac]) + test "$am_cv_func_iconv_works" = no || break + done + LIBS="$am_save_LIBS" + ]) + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + AC_DEFINE([HAVE_ICONV], [1], + [Define if you have the iconv() function and it works.]) + fi + if test "$am_cv_lib_iconv" = yes; then + AC_MSG_CHECKING([how to link with libiconv]) + AC_MSG_RESULT([$LIBICONV]) + else + dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV + dnl either. + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + AC_SUBST([LIBICONV]) + AC_SUBST([LTLIBICONV]) +]) + +dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to +dnl avoid warnings like +dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". +dnl This is tricky because of the way 'aclocal' is implemented: +dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. +dnl Otherwise aclocal's initial scan pass would miss the macro definition. +dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. +dnl Otherwise aclocal would emit many "Use of uninitialized value $1" +dnl warnings. +m4_define([gl_iconv_AC_DEFUN], + m4_version_prereq([2.64], + [[AC_DEFUN_ONCE( + [$1], [$2])]], + [m4_ifdef([gl_00GNULIB], + [[AC_DEFUN_ONCE( + [$1], [$2])]], + [[AC_DEFUN( + [$1], [$2])]])])) +gl_iconv_AC_DEFUN([AM_ICONV], +[ + AM_ICONV_LINK + if test "$am_cv_func_iconv" = yes; then + AC_MSG_CHECKING([for iconv declaration]) + AC_CACHE_VAL([am_cv_proto_iconv], [ + AC_COMPILE_IFELSE( + [AC_LANG_PROGRAM( + [[ +#include +#include +extern +#ifdef __cplusplus +"C" +#endif +#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) +size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); +#else +size_t iconv(); +#endif + ]], + [[]])], + [am_cv_proto_iconv_arg1=""], + [am_cv_proto_iconv_arg1="const"]) + am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) + am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` + AC_MSG_RESULT([ + $am_cv_proto_iconv]) + AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], + [Define as const if the declaration of iconv() needs const.]) + dnl Also substitute ICONV_CONST in the gnulib generated . + m4_ifdef([gl_ICONV_H_DEFAULTS], + [AC_REQUIRE([gl_ICONV_H_DEFAULTS]) + if test -n "$am_cv_proto_iconv_arg1"; then + ICONV_CONST="const" + fi + ]) + fi +]) diff --git a/m4/intlmacosx.m4 b/m4/intlmacosx.m4 new file mode 100644 index 0000000..bba7b3d --- /dev/null +++ b/m4/intlmacosx.m4 @@ -0,0 +1,56 @@ +# intlmacosx.m4 serial 5 (gettext-0.18.2) +dnl Copyright (C) 2004-2014 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Checks for special options needed on Mac OS X. +dnl Defines INTL_MACOSX_LIBS. +AC_DEFUN([gt_INTL_MACOSX], +[ + dnl Check for API introduced in Mac OS X 10.2. + AC_CACHE_CHECK([for CFPreferencesCopyAppValue], + [gt_cv_func_CFPreferencesCopyAppValue], + [gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[#include ]], + [[CFPreferencesCopyAppValue(NULL, NULL)]])], + [gt_cv_func_CFPreferencesCopyAppValue=yes], + [gt_cv_func_CFPreferencesCopyAppValue=no]) + LIBS="$gt_save_LIBS"]) + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], + [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) + fi + dnl Check for API introduced in Mac OS X 10.3. + AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], + [gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[#include ]], + [[CFLocaleCopyCurrent();]])], + [gt_cv_func_CFLocaleCopyCurrent=yes], + [gt_cv_func_CFLocaleCopyCurrent=no]) + LIBS="$gt_save_LIBS"]) + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], + [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + AC_SUBST([INTL_MACOSX_LIBS]) +]) diff --git a/m4/intltool.m4 b/m4/intltool.m4 deleted file mode 100644 index c25b7b1..0000000 --- a/m4/intltool.m4 +++ /dev/null @@ -1,212 +0,0 @@ -## intltool.m4 - Configure intltool for the target system. -*-Shell-script-*- -## Copyright (C) 2001 Eazel, Inc. -## Author: Maciej Stachowiak -## Kenneth Christiansen -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) -# serial 42 IT_PROG_INTLTOOL -AC_DEFUN([IT_PROG_INTLTOOL], [ -AC_PREREQ([2.50])dnl -AC_REQUIRE([AM_NLS])dnl - -case "$am__api_version" in - 1.[01234]) - AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) - ;; - *) - ;; -esac - -INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` -INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -if test -n "$1"; then - AC_MSG_CHECKING([for intltool >= $1]) - AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) -fi - -AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) -AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) -AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) -fi - -if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 -fi -AC_SUBST([AM_DEFAULT_VERBOSITY]) - -INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' -INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' -INTLTOOL__v_MERGE_0='@echo " ITMRG " [$]@;' -AC_SUBST(INTLTOOL_V_MERGE) -AC_SUBST(INTLTOOL__v_MERGE_) -AC_SUBST(INTLTOOL__v_MERGE_0) - -INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' -intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' -intltool__v_merge_options_0='-q' -AC_SUBST(INTLTOOL_V_MERGE_OPTIONS) -AC_SUBST(intltool__v_merge_options_) -AC_SUBST(intltool__v_merge_options_0) - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< [$]@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< [$]@' -else - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.[$][$]RANDOM && mkdir [$][$]_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u [$][$]_it_tmp_dir $< [$]@ && rmdir [$][$]_it_tmp_dir' -fi - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - -_IT_SUBST(INTLTOOL_DESKTOP_RULE) -_IT_SUBST(INTLTOOL_DIRECTORY_RULE) -_IT_SUBST(INTLTOOL_KEYS_RULE) -_IT_SUBST(INTLTOOL_PROP_RULE) -_IT_SUBST(INTLTOOL_OAF_RULE) -_IT_SUBST(INTLTOOL_PONG_RULE) -_IT_SUBST(INTLTOOL_SERVER_RULE) -_IT_SUBST(INTLTOOL_SHEET_RULE) -_IT_SUBST(INTLTOOL_SOUNDLIST_RULE) -_IT_SUBST(INTLTOOL_UI_RULE) -_IT_SUBST(INTLTOOL_XAM_RULE) -_IT_SUBST(INTLTOOL_KBD_RULE) -_IT_SUBST(INTLTOOL_XML_RULE) -_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) -_IT_SUBST(INTLTOOL_CAVES_RULE) -_IT_SUBST(INTLTOOL_SCHEMAS_RULE) -_IT_SUBST(INTLTOOL_THEME_RULE) -_IT_SUBST(INTLTOOL_SERVICE_RULE) -_IT_SUBST(INTLTOOL_POLICY_RULE) - -# Check the gettext tools to make sure they are GNU -AC_PATH_PROG(XGETTEXT, xgettext) -AC_PATH_PROG(MSGMERGE, msgmerge) -AC_PATH_PROG(MSGFMT, msgfmt) -AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) -fi - -AC_PATH_PROG(INTLTOOL_PERL, perl) -if test -z "$INTLTOOL_PERL"; then - AC_MSG_ERROR([perl not found]) -fi -AC_MSG_CHECKING([for perl >= 5.8.1]) -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - AC_MSG_ERROR([perl 5.8.1 is required for intltool]) -else - IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` - AC_MSG_RESULT([$IT_PERL_VERSION]) -fi -if test "x$2" != "xno-xml"; then - AC_MSG_CHECKING([for XML::Parser]) - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - AC_MSG_RESULT([ok]) - else - AC_MSG_ERROR([XML::Parser perl module is required for intltool]) - fi -fi - -# Substitute ALL_LINGUAS so we can use it in po/Makefile -AC_SUBST(ALL_LINGUAS) - -IT_PO_SUBDIR([po]) - -]) - - -# IT_PO_SUBDIR(DIRNAME) -# --------------------- -# All po subdirs have to be declared with this macro; the subdir "po" is -# declared by IT_PROG_INTLTOOL. -# -AC_DEFUN([IT_PO_SUBDIR], -[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. -dnl -dnl The following CONFIG_COMMANDS should be executed at the very end -dnl of config.status. -AC_CONFIG_COMMANDS_PRE([ - AC_CONFIG_COMMANDS([$1/stamp-it], [ - if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then - AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) - fi - rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" - >"$1/stamp-it.tmp" - [sed '/^#/d - s/^[[].*] *// - /^[ ]*$/d - '"s|^| $ac_top_srcdir/|" \ - "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" - ] - [sed '/^POTFILES =/,/[^\\]$/ { - /^POTFILES =/!d - r $1/POTFILES - } - ' "$1/Makefile.in" >"$1/Makefile"] - rm -f "$1/Makefile.tmp" - mv "$1/stamp-it.tmp" "$1/stamp-it" - ]) -])dnl -]) - -# _IT_SUBST(VARIABLE) -# ------------------- -# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST -# -AC_DEFUN([_IT_SUBST], -[ -AC_SUBST([$1]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) -] -) - -# deprecated macros -AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) -# A hint is needed for aclocal from Automake <= 1.9.4: -# AC_DEFUN([AC_PROG_INTLTOOL], ...) - diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4 new file mode 100644 index 0000000..91ca911 --- /dev/null +++ b/m4/lib-ld.m4 @@ -0,0 +1,119 @@ +# lib-ld.m4 serial 6 +dnl Copyright (C) 1996-2003, 2009-2015 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl Subroutines of libtool.m4, +dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid +dnl collision with libtool.m4. + +dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], +[# I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 /dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` + while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL([acl_cv_path_LD], +[if test -z "$LD"; then + acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$acl_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 = 1.10 to complain if config.rpath is missing. + m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE([rpath], + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) + +dnl AC_LIB_FROMPACKAGE(name, package) +dnl declares that libname comes from the given package. The configure file +dnl will then not have a --with-libname-prefix option but a +dnl --with-package-prefix option. Several libraries can come from the same +dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar +dnl macro call that searches for libname. +AC_DEFUN([AC_LIB_FROMPACKAGE], +[ + pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) + define([acl_frompackage_]NAME, [$2]) + popdef([NAME]) + pushdef([PACK],[$2]) + pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) + define([acl_libsinpackage_]PACKUP, + m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1]) + popdef([PACKUP]) + popdef([PACK]) +]) + +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found +dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) + pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) + pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) + pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) + dnl Autoconf >= 2.61 supports dots in --with options. + pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_ARG_WITH(P_A_C_K[-prefix], +[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib + --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + LIB[]NAME[]_PREFIX= + dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been + dnl computed. So it has to be reset here. + HAVE_LIB[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + dnl The same code as in the loop below: + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$acl_hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi + popdef([P_A_C_K]) + popdef([PACKLIBS]) + popdef([PACKUP]) + popdef([PACK]) + popdef([NAME]) +]) + +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) + +dnl For those cases where a variable contains several -L and -l options +dnl referring to unknown libraries and directories, this macro determines the +dnl necessary additional linker options for the runtime path. +dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) +dnl sets LDADDVAR to linker options needed together with LIBSVALUE. +dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, +dnl otherwise linking without libtool is assumed. +AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], +[ + AC_REQUIRE([AC_LIB_RPATH]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + $1= + if test "$enable_rpath" != no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode directories into the resulting + dnl binary. + rpathdirs= + next= + for opt in $2; do + if test -n "$next"; then + dir="$next" + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= + else + case $opt in + -L) next=yes ;; + -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= ;; + *) next= ;; + esac + fi + done + if test "X$rpathdirs" != "X"; then + if test -n ""$3""; then + dnl libtool is used for linking. Use -R options. + for dir in $rpathdirs; do + $1="${$1}${$1:+ }-R$dir" + done + else + dnl The linker is used for linking directly. + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user + dnl must pass all path elements in one option. + alldirs= + for dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="$flag" + else + dnl The -rpath options are cumulative. + for dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="${$1}${$1:+ }$flag" + done + fi + fi + fi + fi + fi + AC_SUBST([$1]) +]) diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4 new file mode 100644 index 0000000..0465f47 --- /dev/null +++ b/m4/lib-prefix.m4 @@ -0,0 +1,224 @@ +# lib-prefix.m4 serial 7 (gettext-0.18) +dnl Copyright (C) 2001-2005, 2008-2015 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) + +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_PREPARE_MULTILIB creates +dnl - a variable acl_libdirstem, containing the basename of the libdir, either +dnl "lib" or "lib64" or "lib/64", +dnl - a variable acl_libdirstem2, as a secondary possible value for +dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or +dnl "lib/amd64". +AC_DEFUN([AC_LIB_PREPARE_MULTILIB], +[ + dnl There is no formal standard regarding lib and lib64. + dnl On glibc systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine + dnl the compiler's default mode by looking at the compiler's library search + dnl path. If at least one of its elements ends in /lib64 or points to a + dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. + dnl Otherwise we use the default, namely "lib". + dnl On Solaris systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or + dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. + AC_REQUIRE([AC_CANONICAL_HOST]) + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment + dnl . + dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." + dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the + dnl symlink is missing, so we set acl_libdirstem2 too. + AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], + [AC_EGREP_CPP([sixtyfour bits], [ +#ifdef _LP64 +sixtyfour bits +#endif + ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) + ]) + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" +]) diff --git a/m4/po.m4 b/m4/po.m4 new file mode 100644 index 0000000..d4bc262 --- /dev/null +++ b/m4/po.m4 @@ -0,0 +1,453 @@ +# po.m4 serial 24 (gettext-0.19) +dnl Copyright (C) 1995-2014 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +AC_PREREQ([2.60]) + +dnl Checks for all prerequisites of the po subdirectory. +AC_DEFUN([AM_PO_SUBDIRS], +[ + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AC_PROG_MKDIR_P])dnl + AC_REQUIRE([AC_PROG_SED])dnl + AC_REQUIRE([AM_NLS])dnl + + dnl Release version of the gettext macros. This is used to ensure that + dnl the gettext macros and po/Makefile.in.in are in sync. + AC_SUBST([GETTEXT_MACRO_VERSION], [0.19]) + + dnl Perform the following tests also if --disable-nls has been given, + dnl because they are needed for "make dist" to work. + + dnl Search for GNU msgfmt in the PATH. + dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. + dnl The second test excludes FreeBSD msgfmt. + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) + + dnl Test whether it is GNU msgfmt >= 0.15. +changequote(,)dnl + case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; + *) MSGFMT_015=$MSGFMT ;; + esac +changequote([,])dnl + AC_SUBST([MSGFMT_015]) +changequote(,)dnl + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac +changequote([,])dnl + AC_SUBST([GMSGFMT_015]) + + dnl Search for GNU xgettext 0.12 or newer in the PATH. + dnl The first test excludes Solaris xgettext and early GNU xgettext versions. + dnl The second test excludes FreeBSD xgettext. + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + + dnl Test whether it is GNU xgettext >= 0.15. +changequote(,)dnl + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac +changequote([,])dnl + AC_SUBST([XGETTEXT_015]) + + dnl Search for GNU msgmerge 0.11 or newer in the PATH. + AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, + [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) + + dnl Installation directories. + dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we + dnl have to define it here, so that it can be used in po/Makefile. + test -n "$localedir" || localedir='${datadir}/locale' + AC_SUBST([localedir]) + + dnl Support for AM_XGETTEXT_OPTION. + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) + + AC_CONFIG_COMMANDS([po-directories], [[ + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + # Treat a directory as a PO directory if and only if it has a + # POTFILES.in file. This allows packages to have multiple PO + # directories under different names or in different locations. + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + gt_tab=`printf '\t'` + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assignment from automake < 1.5. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + # Hide the ALL_LINGUAS assignment from automake < 1.5. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + # Compute POFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) + # Compute UPDATEPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) + # Compute DUMMYPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) + # Compute GMOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + UPDATEPOFILES= + DUMMYPOFILES= + GMOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done]], + [# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it + # from automake < 1.5. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + ]) +]) + +dnl Postprocesses a Makefile in a directory containing PO files. +AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], +[ + # When this code is run, in config.status, two variables have already been + # set: + # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, + # - LINGUAS is the value of the environment variable LINGUAS at configure + # time. + +changequote(,)dnl + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + # Find a way to echo strings without interpreting backslash. + if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then + gt_echo='echo' + else + if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then + gt_echo='printf %s\n' + else + echo_func () { + cat < "$ac_file.tmp" + tab=`printf '\t'` + if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then + # Add dependencies that cannot be formulated as a simple suffix rule. + for lang in $ALL_LINGUAS; do + frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` + cat >> "$ac_file.tmp" < /dev/null; then + # Add dependencies that cannot be formulated as a simple suffix rule. + for lang in $ALL_LINGUAS; do + frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` + cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. + +AC_PREREQ([2.50]) + +# Search path for a program which passes the given test. + +dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST], +[ +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL([ac_cv_path_$1], +[case "[$]$1" in + [[\\/]]* | ?:[[\\/]]*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in ifelse([$5], , $PATH, [$5]); do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then + AC_MSG_RESULT([$][$1]) +else + AC_MSG_RESULT([no]) +fi +AC_SUBST([$1])dnl +]) diff --git a/m4/yelp.m4 b/m4/yelp.m4 index 5db847f..709c48e 100644 --- a/m4/yelp.m4 +++ b/m4/yelp.m4 @@ -180,7 +180,13 @@ install-help: $(_HELP_LC_FILES) elif test "x$$lc" != "xC"; then \ if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ - $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ + dname="$$f"; \ + pars="../"; \ + while test "$$dname" != "." -a "$$dname" != "/"; do \ + pars="../$$pars"; \ + dname=$$(dirname "$$dname"); \ + done; \ + $(LN_S) -f $$pars"C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ fi; \ fi; \ done; \ -- cgit v1.2.3