New upstream version 5.2.0Beta2.1upstream/5.2.0Beta2.1

1 files changed, 238 insertions, 6 deletions

diff --git a/app/help/messages.in b/app/help/messages.in
index 519f2f8..f5bb62b 100644
--- a/app/help/messages.in
+++ b/app/help/messages.in
@@ -78,6 +78,16 @@ HELP
 The angle specified for a curve must be between 0\u00B0 and 360\u00B0.
 END
 
+# ctodesgn.c
+MESSAGE MSG_TODSGN_CORNU_TOO_COMPLEX
+The curves created by the Turnout Designer for a cornu curve have more than 128 segments.
+Try adjusting the end angles and radii to be closer in values.
+HELP
+Too complex a curve set to be used. Respecify \f{Turnout Designer} values.
+
+Refer to \k{cmdTurnoutNew} for detail.
+END
+
 # dcustmgm.c
 MESSAGE MSG_CUSTMGM_DELETE_CONFIRM
 Are you sure you want to delete the
@@ -114,7 +124,7 @@ Cannot change elevation mode.
 HELP
 In the \f{Profile} command, the \f{Elevation} mode for this \e{endpoint} can be change only if it is \f{Defined}, \f{Ignored} or \f{None}. The \f{Elevation} command can be used to change this \e{endpoint}.
 
-Refer to \k{cmdElev} for detail.
+Refer to \k{cmdElevation} for detail.
 END
 
 # csnap.c
@@ -160,6 +170,15 @@ The current \f{Layer} is where most new objects are created. It's not possible t
 Refer to \k{cmdLayer} for detail.
 END
 
+# dlayer.c
+MESSAGE MSG_LAYER_MODULE
+Cannot turn current layer into a Module
+HELP
+The current \f{Layer} is where new objects are created. It's not possible to turn this layer into a module, since then the objects can't be chnaged or added. Change the current \f{Layer} to some other \f{Layer} before trying to make this Layer into a module.
+
+Refer to \k{cmdLayer} for detail.
+END
+
 # cjoin.c track.c:getTrackParams/PARAMS_..._JOIN
 MESSAGE MSG_JOIN_EASEMENTS
 Cannot Join; Easements do not align or abut.
@@ -189,7 +208,7 @@ You cannot select a \f{Turntable} as the second track in \f{Join} command. If yo
 Refer to \k{cmdJoin} for detail.
 END
 
- ccornu.c
+# ccornu.c
 MESSAGE MSG_JOIN_CORNU_SAME
 Cannot Join; Selected endpoints are on same track.
 HELP
@@ -376,6 +395,48 @@ necessary to upgrade your version of \e{XTrackCAD} to at least the version ident
 Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release.
 END
 
+#fileio.c
+MESSAGE MSG_LAYOUT_LINES_SKIPPED
+While processing Layout file %s, %d lines were skipped because they were not recognized.
+HELP
+The layout file that you loaded contained records that were not recognized. This could be because the file was written by a higher level of \e{XTrackCAD} or because it was corrupted.
+
+Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release.
+END
+
+#paramfile.c
+MESSAGE MSG_PARAM_UPGRADE_VERSION1
+File version %ld is greater than supported
+version %d. You need to upgrade %s
+to at least version %s.
+HELP
+The parameter file that you're attempting to load was designed for a newer version
+of \e{XTrackCAD}. In order to load this file it will be necessary to upgrade your version of \e{XTrackCAD} to at least the version identified within the error message.
+
+Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Website} and downloading the latest release.
+END
+
+#paramfile.c
+MESSAGE MSG_PARAM_UPGRADE_VERSION2
+File version %ld is greater than supported
+version %d. You need to upgrade your
+version of %s
+HELP
+The parameter file that you're attempting to load was designed for a newer version of \e{XTrackCAD}. In order to load this file it will be
+necessary to upgrade your version of \e{XTrackCAD} to at least the version identified within the error message.
+
+Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release.
+END
+
+#paramfile.c
+MESSAGE MSG_PARAM_LINES_SKIPPED
+While processing Parameter file %s, %d lines were skipped because they were not recognized.
+HELP
+The parameter file that you loaded contained records that were not recognized. This could be because the file was designed for a higher level of \e{XTrackCAD} or because it was corrupted.
+
+Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release.
+END
+
 # chndldto.c
 MESSAGE MSG_MOVE_POINTS_OTHER_SIDE
 Frog angle prevents placement of points. Move points to opposite side of frog.
@@ -404,6 +465,16 @@ You are connecting two \e{endpoints} which differ in heights by N.NNN. The eleva
 END
 
 # cselect.c:cmdMoveDescription
+MESSAGE MSG_TRK_DESC_NOT_VISIBLE
+Label description is hidden
+HELP
+The \f{Move Description} command can only be used when labels are visible on the layout. Labels can be hidden using the Context Menu.
+
+Use the Context Menu to toggle a track's visbility on and off.
+
+END
+
+# cselect.c:cmdMoveDescription
 MESSAGE MSG_DESC_NOT_VISIBLE
 Label descriptions not visible
 HELP
@@ -439,6 +510,13 @@ Values for \f{Page Width} and \f{Height} can be manually entered thus overriding
 Refer to \k{cmdPrint} for detail.
 END
 
+MESSAGE MSG_NO_PRINTER_SELECTED
+Please select a printer from the Print Setup dialog.
+HELP
+Printer Margins are specific to the selected printer, but no selected printer is chosen.
+You can select a printer from the Print Setup dialog.
+END
+
 # dprmfile.c
 MESSAGE MSG_PRMFIL_NO_CONTENTS
 New Parameter File has no CONTENTS line: %s
@@ -518,6 +596,13 @@ The current command operates on \f{Select}ed tracks of which there are none. \f{
 Refer to \k{cmdSelect} for detail.
 END
 
+# dlayer.c
+MESSAGE MSG_NO_EMPTY_LAYER
+No layer was found that has no contents, so the module can not be imported
+HELP
+The import module function needs an empty layer to work with, but none could be found. Clear a layer and retry.
+END
+
 # dcmpnd.c:refreshCompound
 MESSAGE MSG_NO_TURNOUTS_AVAILABLE
 No %s are available.
@@ -551,9 +636,9 @@ END
 
 # cparalle.c
 MESSAGE MSG_PARALLEL_SEP_GTR_0
-Parallel separation must be greater than 0.
+Parallel separation must be greater than 0, or the new guage must be different than the old.
 HELP
-A parallel track with a separation of 0 or less cannot be created. Specify a positive value in the \f{Separation} field that appears in the Status Bar.
+A parallel track with an identical gauge and separation of 0 or less cannot be created. Specify a positive value in the \f{Separation} field that appears in the Status Bar, or select a track with a different guage.
 
 Refer to \k{cmdParallel} for detail.
 END
@@ -617,7 +702,14 @@ END
 MESSAGE MSG_POLY_SHAPES_3_SIDES
 Poly shapes must have at least 3 sides.
 HELP
-Polygons and Poly Lines must have at least 3 sides. By moving one of the corners close to another corner you're attempting to merge the corners and create a Poly shape with only 2 sides. Try moving the other corner to the new position first.
+Polygons and Poly Lines must have at least 3 sides. You're attempting to create a Poly shape with only 2 sides by deleting the third. 
+END
+
+# drawgeom.c
+MESSAGE MSG_POLY_MULTIPLE_SELECTED
+Can't delete multiple points at once
+HELP
+Polygons and Poly Lines points can only be deleted one at a time. 
 END
 
 # dcar.c
@@ -928,6 +1020,15 @@ This operation cannot be executed as the selected track is present on a frozen l
 Refer to \k{cmdLayer} for detail.
 END
 
+# track.c
+MESSAGE MSG_CANT_MODIFY_MODULE_TRK
+Tracks in a module cannot be modified.
+HELP
+This operation cannot be executed as the selected track is present in a module layer. Track modifications may be performed only on unfrozen, non-module layers.
+
+Refer to \k{cmdLayer} for detail.
+END
+
 #ctodesgn.c
 MESSAGE MSG_SEGMENTS_DIFFER
 Turnout definition contains non-track segments.
@@ -1015,6 +1116,132 @@ Cannot open %s file:
 #NOHELP
 END
 
+# fileio.c
+MESSAGE MSG_DIR_CREATE_FAIL
+Cannot create directory: %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_DIR_OPEN_FAIL
+Cannot open directory: %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_NOT_DIR_FAIL
+Path for deletion is not a directory: %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_OPEN_DIR_FAIL
+Open failed for directory: %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_DIR_ADD_FAIL
+Can't add directory record %s to zip - %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_FILE_ADD_FAIL
+Can't add file record %s to zip at %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_CREATE_FAIL
+Can't create zip %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_CLOSE_FAIL
+Close failure for zip %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_RENAME_FAIL
+Rename failure for zip from %s to %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_OPEN_FAIL
+Open failure for zip %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_INDEX_FAIL
+Index failure for zip %s - %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_FILE_OPEN_FAIL
+Open read file failure %s %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ZIP_READ_FAIL
+Open file in zip failure %s %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_UNLINK_FAIL
+Unlink failed for: %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_RMDIR_FAIL
+Remove Directory failed for: %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_ARCHIVE_FAIL
+Cannot save archive to %s from directory: %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_MANIFEST_FAIL
+Cannot save manifest file to %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_MANIFEST_OPEN_FAIL
+Cannot open manifest file %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_UNPACK_FAIL
+Cannot unpack file: %s for file: %s in directory: %s
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_COPY_OPEN_FAIL
+Cannot open file %s 
+#NOHELP
+END
+
+# fileio.c
+MESSAGE MSG_COPY_FAIL
+Cannot copy file %s into directory %s
+#NOHELP
+END
+
 # various
 MESSAGE MSG_BAD_OPTION
 Unrecognized Option: %s
@@ -1208,7 +1435,12 @@ layout file using an older version of %s
 #NOHELP
 END
 
-
+# paramfile.c
+MESSAGE MSG_PARAM_BAD_FILE_VERSION
+File version %ld is lower than the minimum
+supported version %d.This parameter file will only work using an older version of %s
+#NOHELP
+END
 
 # macro.c
 MESSAGE MSG_CANT_READ_DEMO