/* \file ctodesgn.c
* T_TURNOUT Designer
*
*/
/* XTrkCad - Model Railroad CAD
* Copyright (C) 2005 Dave Bullis
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "ccurve.h"
#include "compound.h"
#include "cstraigh.h"
#include "custom.h"
#include "fileio.h"
#include "param.h"
#include "track.h"
#include "trkendpt.h"
#include "ccornu.h"
#include "cbezier.h"
#include "misc.h"
#include "common-ui.h"
static int log_cornuturnoutdesigner;
dynArr_t tempSegs_da;
char tempCustom[4096];
#define TURNOUTDESIGNER "CTURNOUT DESIGNER"
dynArr_t tempSegs_da;
// Minimum Track Segment length
#define MIN_TRACK_LENGTH (0.20)
/*****************************************
*
* TURNOUT DESIGNER
*
*/
#define NTO_REGULAR (1)
#define NTO_CURVED (2)
#define NTO_WYE (3)
#define NTO_3WAY (4)
#define NTO_CROSSING (5)
#define NTO_S_SLIP (6)
#define NTO_D_SLIP (7)
#define NTO_R_CROSSOVER (8)
#define NTO_L_CROSSOVER (9)
#define NTO_D_CROSSOVER (10)
#define NTO_STR_SECTION (11)
#define NTO_CRV_SECTION (12)
#define NTO_BUMPER (13)
#define NTO_TURNTABLE (14)
#define NTO_CORNU (15)
#define NTO_CORNUWYE (16)
#define NTO_CORNU3WAY (17)
#define FLOAT (1)
typedef struct {
struct {
wWinPix_t x, y;
} pos;
int index;
char * winLabel;
char * printLabel;
enum { Dim_e, Frog_e, Angle_e, Rad_e } mode;
} toDesignFloat_t;
typedef struct {
PATHPTR_T paths;
char * segOrder;
} toDesignSchema_t;
typedef struct {
int type;
char * label;
int strCnt;
int lineCnt;
wLines_t * lines;
int floatCnt;
toDesignFloat_t * floats;
toDesignSchema_t * paths;
int angleModeCnt;
wLine_p lineC;
wBool_t slipmode;
} toDesignDesc_t;
#ifndef MKTURNOUT
static wWin_p newTurnW;
#endif
static FLOAT_T newTurnRad0;
static FLOAT_T newTurnAngle0;
static FLOAT_T newTurnLen0;
static FLOAT_T newTurnOff0;
static FLOAT_T newTurnRad1;
static FLOAT_T newTurnAngle1;
static FLOAT_T newTurnLen1;
static FLOAT_T newTurnOff1;
static FLOAT_T newTurnRad2;
static FLOAT_T newTurnAngle2;
static FLOAT_T newTurnLen2;
static FLOAT_T newTurnOff2;
static FLOAT_T newTurnRad3;
static FLOAT_T newTurnAngle3;
static FLOAT_T newTurnOff3;
static FLOAT_T newTurnLen3;
static FLOAT_T newTurnToeL;
static FLOAT_T newTurnToeR;
static long newTurnAngleMode = 1;
static long newTurnSlipMode = 0;
static char newTurnRightDesc[STR_SIZE], newTurnLeftDesc[STR_SIZE];
static char newTurnRightPartno[STR_SIZE], newTurnLeftPartno[STR_SIZE];
static char newTurnManufacturer[STR_SIZE];
static char *newTurnAngleModeLabels[] = { N_("Frog #"), N_("Degrees"), NULL };
static char *newTurnSlipModeLabels[] = { N_("Dual Path"), N_("Quad Path"), NULL };
static DIST_T newTurnRoadbedWidth;
static LWIDTH_T newTurnRoadbedLineWidth = 0;
static wDrawColor newTurnRoadbedColor;
static DIST_T newTurnTrackGauge;
static char * newTurnScaleName;
static paramFloatRange_t r0d001_10000 = { 0.001, 10000, 80 };
static paramFloatRange_t r0d300_10000 = { 0.300, 10000, 80 };
//static paramFloatRange_t r0_10000 = { 0, 10000, 80 };
static paramFloatRange_t r_10000_10000 = { -1000, 10000, 80 };
static paramFloatRange_t r0d001_90 = { 0.001, 90, 80 };
static paramFloatRange_t r0_100 = { 0, 100, 80 };
static paramIntegerRange_t i0_100 = { 0, 100, 40 };
static void NewTurnOk( void * context );
#ifndef MKTURNOUT
static paramFloatRange_t r_90_90 = { -90, 90, 80 };
static void ShowTurnoutDesigner( void * context );
#endif
static coOrd points[20];
#ifndef MKTURNOUT
static coOrd end_points[20];
static coOrd end_centers[20];
static double end_arcs[20];
static double end_angles[20];
#endif
static DIST_T radii[10];
static double angles[10];
#define POSX(X) ((wWinPix_t)((X)*newTurnout_d.dpi))
#define POSY(Y) ((wWinPix_t)((Y)*newTurnout_d.dpi))
static paramData_t turnDesignPLs[] = {
#define I_TOLENGTH (0)
#define I_TO_FIRST_FLOAT (0)
{ PD_FLOAT, &newTurnLen0, "len0", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Length") },
{ PD_FLOAT, &newTurnLen1, "len1", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Length") },
{ PD_FLOAT, &newTurnLen2, "len2", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Length") },
{ PD_FLOAT, &newTurnLen3, "len3", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Length") },
#define I_TOOFFSET (4)
{ PD_FLOAT, &newTurnOff0, "off0", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Offset") },
{ PD_FLOAT, &newTurnOff1, "off1", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Offset") },
{ PD_FLOAT, &newTurnOff2, "off2", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Offset") },
{ PD_FLOAT, &newTurnOff3, "off3", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d001_10000, N_("Offset") },
#define I_TORAD (8)
{ PD_FLOAT, &newTurnRad0, "rad0", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r_10000_10000, N_("Radius") },
{ PD_FLOAT, &newTurnRad1, "rad1", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r_10000_10000, N_("Radius") },
{ PD_FLOAT, &newTurnRad2, "rad2", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r_10000_10000, N_("Radius") },
{ PD_FLOAT, &newTurnRad3, "rad3", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r_10000_10000, N_("Radius") },
#define I_TOTOELENGTH (12)
{ PD_FLOAT, &newTurnToeL, "toeL", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d300_10000, N_("Length") },
{ PD_FLOAT, &newTurnToeR, "toeR", PDO_DIM|PDO_DLGIGNORELABELWIDTH, &r0d300_10000, N_("Length") },
#define I_TOANGLE (14)
{ PD_FLOAT, &newTurnAngle0, "angle0", PDO_DLGIGNORELABELWIDTH, &r0d001_90, N_("Angle") },
{ PD_FLOAT, &newTurnAngle1, "angle1", PDO_DLGIGNORELABELWIDTH, &r0d001_90, N_("Angle") },
{ PD_FLOAT, &newTurnAngle2, "angle2", PDO_DLGIGNORELABELWIDTH, &r0d001_90, N_("Angle") },
#define I_TO_LAST_FLOAT (17)
{ PD_FLOAT, &newTurnAngle3, "angle3", PDO_DLGIGNORELABELWIDTH, &r0d001_90, N_("Angle") },
#define I_TOMANUF (18)
{ PD_STRING, &newTurnManufacturer, "manuf", PDO_NOTBLANK, NULL, N_("Manufacturer"), 0, 0, sizeof(newTurnManufacturer)},
#define I_TOLDESC (19)
{ PD_STRING, &newTurnLeftDesc, "desc1", PDO_NOTBLANK, NULL, N_("Left Description"), 0, 0, sizeof(newTurnLeftDesc)},
{ PD_STRING, &newTurnLeftPartno, "partno1", PDO_DLGHORZ | PDO_NOTBLANK, NULL, N_(" #"), 0, 0, sizeof(newTurnLeftPartno)},
#define I_TORDESC (21)
{ PD_STRING, &newTurnRightDesc, "desc2", PDO_NOTBLANK, NULL, N_("Right Description"),0, 0, sizeof(newTurnRightDesc)},
{ PD_STRING, &newTurnRightPartno, "partno2", PDO_DLGHORZ | PDO_NOTBLANK, NULL, N_(" #"),0, 0, sizeof(newTurnRightPartno)},
{ PD_FLOAT, &newTurnRoadbedWidth, "roadbedWidth", PDO_DIM, &r0_100, N_("Roadbed Width") },
{ PD_LONG, &newTurnRoadbedLineWidth, "roadbedLineWidth", PDO_DLGHORZ, &i0_100, N_("Line Width") },
{ PD_COLORLIST, &newTurnRoadbedColor, "color", PDO_DLGHORZ|PDO_DLGBOXEND, NULL, N_("Color") },
{ PD_BUTTON, NewTurnOk, "done", PDO_DLGCMDBUTTON, NULL, N_("Ok") },
{ PD_BUTTON, wPrintSetup, "printsetup", 0, NULL, N_("Print Setup") },
#define I_TOANGMODE (28)
{ PD_RADIO, &newTurnAngleMode, "angleMode", 0, newTurnAngleModeLabels },
#define I_TOSLIPMODE (29)
{ PD_RADIO, &newTurnSlipMode, "slipMode", 0, newTurnSlipModeLabels }
};
#ifndef MKTURNOUT
static paramGroup_t turnDesignPG = { "turnoutNew", 0, turnDesignPLs, COUNT( turnDesignPLs ) };
static turnoutInfo_t * customTurnout1, * customTurnout2;
static BOOL_T includeNontrackSegments;
#else
int doCustomInfoLine = 1;
int doRoadBed = 0;
char specialLine[256];
#endif
static toDesignDesc_t * curDesign;
/*
* Regular Turnouts
*/
static wLines_t RegLines[] = {
#include "toreg.lin"
};
static toDesignFloat_t RegFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Diverging Length"), Dim_e },
{ { 400, 28 }, I_TOANGLE+0, N_("Angle"), N_("Diverging Angle"), Frog_e },
{ { 325, 68 }, I_TOOFFSET+0, N_("Offset"), N_("Diverging Offset"), Dim_e },
{ { 100, 120 }, I_TOLENGTH+1, N_("Length"), N_("Overall Length"), Dim_e },
};
static signed char RegPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 3, 4, 0, 0, 0
};
static toDesignSchema_t RegSchema = {
RegPaths,
"030" "310" "341" "420"
};
static toDesignDesc_t RegDesc = {
NTO_REGULAR,
N_("Regular Turnout"),
2,
COUNT( RegLines ), RegLines,
COUNT( RegFloats ), RegFloats,
&RegSchema, 1
};
static wLines_t CrvLines[] = {
#include "tocrv.lin"
};
static toDesignFloat_t CrvFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Inner Length"), Dim_e },
{ { 375, 12 }, I_TOANGLE+0, N_("Angle"), N_("Inner Angle"), Frog_e },
{ { 375, 34 }, I_TOOFFSET+0, N_("Offset"), N_("Inner Offset"), Dim_e },
{ { 400, 62 }, I_TOANGLE+1, N_("Angle"), N_("Outer Angle"), Frog_e },
{ { 400, 84 }, I_TOOFFSET+1, N_("Offset"), N_("Outer Offset"), Dim_e },
{ { 175, 120 }, I_TOLENGTH+1, N_("Length"), N_("Outer Length"), Dim_e }
};
static signed char Crv1Paths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 4, 5, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 2, 3, 0, 0, 0
};
static toDesignSchema_t Crv1Schema = {
Crv1Paths,
"030" "341" "410" "362" "620"
};
static signed char Crv2Paths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 4, 5, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 6, 2, 3, 0, 0, 0
};
static toDesignSchema_t Crv2Schema = {
Crv2Paths,
"050" "341" "410" "562" "620" "530"
};
static signed char Crv3Paths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 6, 4, 5, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 2, 3, 0, 0, 0
};
static toDesignSchema_t Crv3Schema = {
Crv3Paths,
"030" "341" "410" "562" "620" "350"
};
static toDesignDesc_t CrvDesc = {
NTO_CURVED,
N_("Curved Turnout"),
2,
COUNT( CrvLines ), CrvLines,
COUNT( CrvFloats ), CrvFloats,
&Crv1Schema, 1
};
#ifndef MKTURNOUT
static wLines_t CornuLines[] = {
#include "tocornu.lin"
};
static toDesignFloat_t CornuFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Inner Length"), Dim_e },
{ { 375, 0 }, I_TOANGLE+0, N_("Angle"), N_("Inner Angle"), Frog_e },
{ { 375, 22 }, I_TOOFFSET+0, N_("Offset"), N_("Inner Offset"), Dim_e },
{ { 375, 44 }, I_TORAD+0, N_("Radius"), N_("Inner Radius"), Dim_e },
{ { 400, 62 }, I_TOANGLE+1, N_("Angle"), N_("Outer Angle"), Frog_e },
{ { 400, 84 }, I_TOOFFSET+1, N_("Offset"), N_("Outer Offset"), Dim_e },
{ { 400, 106 }, I_TORAD+1, N_("Radius"), N_("Outer Radius"), Dim_e },
{ { 175, 120 }, I_TOLENGTH+1, N_("Length"), N_("Outer Length"), Dim_e },
{ { 50, 90 }, I_TORAD+2, N_("Radius"), N_("Toe Radius"), Dim_e },
{ { 50, 40 }, I_TOTOELENGTH+0, N_("Length"), N_("Toe Length"), Dim_e }
};
static signed char CornuPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 4, 0, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 2, 0, 0, 0, 0
};
static toDesignSchema_t CornuSchema = {
CornuPaths,
"033" "343" "413"
};
static toDesignDesc_t CornuDesc = {
NTO_CORNU,
N_("Cornu Curved Turnout"),
2,
COUNT( CornuLines ), CornuLines,
COUNT( CornuFloats ), CornuFloats,
&CornuSchema, 1
};
#endif
static wLines_t WyeLines[] = {
#include "towye.lin"
};
static toDesignFloat_t WyeFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Left Length"), Dim_e },
{ { 400, 28 }, I_TOANGLE+0, N_("Angle"), N_("Left Angle"), Frog_e },
{ { 325, 68 }, I_TOOFFSET+0, N_("Offset"), N_("Left Offset"), Dim_e },
{ { 325, 115 }, I_TOOFFSET+1, N_("Offset"), N_("Right Offset"), Dim_e },
{ { 400, 153 }, I_TOANGLE+1, N_("Angle"), N_("Right Angle"), Frog_e },
{ { 175, 170 }, I_TOLENGTH+1, N_("Length"), N_("Right Length"), Dim_e },
};
static signed char Wye1Paths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 4, 5, 0, 0, 0
};
static toDesignSchema_t Wye1Schema = {
Wye1Paths,
"030" "341" "410" "362" "620"
};
static signed char Wye2Paths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 4, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 5, 6, 0, 0, 0
};
static toDesignSchema_t Wye2Schema = {
Wye2Paths,
"050" "530" "341" "410" "562" "620"
};
static signed char Wye3Paths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 4, 5, 6, 0, 0, 0
};
static toDesignSchema_t Wye3Schema = {
Wye3Paths,
"030" "341" "410" "350" "562" "620"
};
static toDesignDesc_t WyeDesc = {
NTO_WYE,
N_("Wye Turnout"),
1,
COUNT( WyeLines ), WyeLines,
COUNT( WyeFloats ), WyeFloats,
NULL, 1
};
#ifndef MKTURNOUT
static wLines_t CornuWyeLines[] = {
#include "tocornuwye.lin"
};
static toDesignFloat_t CornuWyeFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Left Length"), Dim_e },
{ { 400, 28 }, I_TOANGLE+0, N_("Angle"), N_("Left Angle"), Frog_e },
{ { 400, 48 }, I_TOOFFSET+0, N_("Offset"), N_("Left Offset"), Dim_e },
{ { 400, 68 }, I_TORAD+0, N_("Radius"), N_("Left Radius"), Dim_e },
{ { 400, 108 }, I_TORAD+1, N_("Radius"), N_("Right Radius"), Dim_e },
{ { 400, 128 }, I_TOOFFSET+1, N_("Offset"), N_("Right Offset"), Dim_e },
{ { 400, 148 }, I_TOANGLE+1, N_("Angle"), N_("Right Angle"), Frog_e },
{ { 175, 170 }, I_TOLENGTH+1, N_("Length"), N_("Right Length"), Dim_e },
{ { 80, 48 }, I_TOTOELENGTH+0, N_("Length"), N_("Toe Length"), Dim_e },
{ { 80, 28 }, I_TORAD+2, N_("Radius"), N_("Toe Radius"), Dim_e },
};
static signed char CornuWyePaths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 4, 5, 0, 0, 0
}; /* Not Used */
static toDesignSchema_t CornuWyeSchema = {
CornuWyePaths,
"030" "341" "410" "362" "620"
}; /* Not Used */
static toDesignDesc_t CornuWyeDesc = {
NTO_CORNUWYE,
N_("Cornu Wye Turnout"),
1,
COUNT( CornuWyeLines ), CornuWyeLines,
COUNT( CornuWyeFloats ), CornuWyeFloats,
NULL, 1
};
#endif
static wLines_t ThreewayLines[] = {
#include "to3way.lin"
};
static toDesignFloat_t ThreewayFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Left Length"), Dim_e },
{ { 400, 28 }, I_TOANGLE+0, N_("Angle"), N_("Left Angle"), Frog_e },
{ { 325, 68 }, I_TOOFFSET+0, N_("Offset"), N_("Left Offset"), Dim_e },
{ { 100, 90 }, I_TOLENGTH+2, N_("Length"), N_("Length"), Dim_e },
{ { 325, 115 }, I_TOOFFSET+1, N_("Offset"), N_("Right Offset"), Dim_e },
{ { 400, 153 }, I_TOANGLE+1, N_("Angle"), N_("Right Angle"), Frog_e },
{ { 175, 170 }, I_TOLENGTH+1, N_("Length"), N_("Right Length"), Dim_e },
};
static signed char Tri1Paths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 0, 0,
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 6, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 4, 5, 0, 0, 0
};
static toDesignSchema_t Tri1Schema = {
Tri1Paths,
"030" "341" "410" "362" "620" "370"
};
static signed char Tri2Paths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 4, 0, 0,
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 7, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 5, 6, 0, 0, 0
};
static toDesignSchema_t Tri2Schema = {
Tri2Paths,
"050" "530" "341" "410" "562" "620" "370"
};
static signed char Tri3Paths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 0, 0,
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 4, 7, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 4, 5, 6, 0, 0, 0
};
static toDesignSchema_t Tri3Schema = {
Tri3Paths,
"030" "341" "410" "350" "562" "620" "570"
};
static toDesignDesc_t ThreewayDesc = {
NTO_3WAY,
N_("3-way Turnout"),
1,
COUNT( ThreewayLines ), ThreewayLines,
COUNT( ThreewayFloats ), ThreewayFloats,
NULL, 1
};
#ifndef MKTURNOUT
static wLines_t CornuThreewayLines[] = {
#include "tocornu3way.lin"
};
static toDesignFloat_t CornuThreewayFloats[] = {
{ { 175, 10 }, I_TOLENGTH+0, N_("Length"), N_("Left Length"), Dim_e },
{ { 380, 10 }, I_TOANGLE+0, N_("Angle"), N_("Left Angle"), Frog_e },
{ { 380, 50 }, I_TOOFFSET+0, N_("Offset"), N_("Left Offset"), Dim_e },
{ { 380, 30 }, I_TORAD+0, N_("Radius"), N_("Left Radius"), Dim_e },
{ { 130, 90 }, I_TOLENGTH+3, N_("Length"), N_("Center Length"), Dim_e },
{ { 400, 70 }, I_TOANGLE+3, N_("Angle"), N_("Center Angle"), Dim_e },
{ { 400, 90}, I_TOOFFSET+3, N_("Offset"), N_("Center Offset"), Dim_e },
{ { 400, 110 }, I_TORAD+3, N_("Radius"), N_("Center Radius"), Dim_e },
{ { 420, 150 }, I_TORAD+1, N_("Radius"), N_("Right Radius"), Dim_e },
{ { 420, 130 }, I_TOOFFSET+1, N_("Offset"), N_("Right Offset"), Dim_e },
{ { 420, 170 }, I_TOANGLE+1, N_("Angle"), N_("Right Angle"), Frog_e },
{ { 175, 170 }, I_TOLENGTH+1, N_("Length"), N_("Right Length"), Dim_e },
{ { 45, 50 }, I_TOTOELENGTH+0, N_("Length"), N_("Toe Length Left"), Dim_e },
{ { 55, 140 }, I_TOTOELENGTH+1, N_("Length"), N_("Toe Length Right"), Dim_e },
{ { 40, 105 }, I_TORAD+2, N_("Radius"), N_("Toe Radius"), Dim_e },
};
static signed char CornuTriPaths[] = {
'L', 'e', 'f', 't', 0, 1, 2, 3, 0, 0,
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 6, 0, 0,
'R', 'i', 'g', 'h', 't', 0, 1, 4, 5, 0, 0, 0
};
static toDesignSchema_t CornuTriSchema = {
CornuTriPaths,
"030" "341" "410" "362" "620" "370"
};
static toDesignDesc_t CornuThreewayDesc = {
NTO_CORNU3WAY,
N_("Cornu 3-way Turnout"),
1,
COUNT( CornuThreewayLines ), CornuThreewayLines,
COUNT( CornuThreewayFloats ), CornuThreewayFloats,
NULL, 1
};
#endif
static wLines_t CrossingLines[] = {
#include "toxing.lin"
};
static toDesignFloat_t CrossingFloats[] = {
{ { 329, 30 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e },
{ { 370, 90 }, I_TOANGLE+0, N_("Angle"), N_("Angle"), Frog_e },
{ { 329, 150 }, I_TOLENGTH+1, N_("Length"), N_("Length"), Dim_e }
};
static signed char CrossingPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 0, 2, 0, 0, 0
};
static toDesignSchema_t CrossingSchema = {
CrossingPaths,
"010" "230"
};
static toDesignDesc_t CrossingDesc = {
NTO_CROSSING,
N_("Crossing"),
1,
COUNT( CrossingLines ), CrossingLines,
COUNT( CrossingFloats ), CrossingFloats,
&CrossingSchema, 1
};
static wLines_t SingleSlipLines[] = {
#include "tosslip.lin"
};
static toDesignFloat_t SingleSlipFloats[] = {
{ { 329, 30 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e },
{ { 370, 90 }, I_TOANGLE+0, N_("Angle"), N_("Angle"), Frog_e },
{ { 329, 155 }, I_TOLENGTH+1, N_("Length"), N_("Length"), Dim_e }
};
static signed char SingleSlipPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 0, 3, 4, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 5, 4, 0, 0, 0
};
static toDesignSchema_t SingleSlipSchema = {
SingleSlipPaths,
"040" "410" "250" "530" "451"
};
static toDesignDesc_t SingleSlipDesc = {
NTO_S_SLIP,
N_("Single Slipswitch"),
1,
COUNT( SingleSlipLines ), SingleSlipLines,
COUNT( SingleSlipFloats ), SingleSlipFloats,
&SingleSlipSchema, 1
};
static wLines_t DoubleSlipLines[] = {
#include "todslip.lin"
};
static toDesignFloat_t DoubleSlipFloats[] = {
{ { 329, 30 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e },
{ { 370, 90 }, I_TOANGLE+0, N_("Angle"), N_("Angle"), Frog_e },
{ { 329, 155 }, I_TOLENGTH+1, N_("Length"), N_("Length"), Dim_e }
};
static signed char DoubleSlipPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 3, 0, 4, 5, 6, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 7, 6, 0, 4, 8, 3, 0, 0, 0
};
static signed char DoubleSlipPaths2[] = {
'C', 'r', 'o', 's', 's', '1', 0, 1, 2, 3, 0, 0,
'C', 'r', 'o', 's', 's', '2', 0, 4, 5, 6, 0, 0,
'S', 'l', 'i', 'p', '1', 0, 1, 7, 6, 0, 0,
'S', 'l', 'i', 'p', '2', 0, 4, 8, 3, 0, 0, 0
};
static toDesignSchema_t DoubleSlipSchema = {
DoubleSlipPaths,
"040" "460" "610" "270" "750" "530" "451" "762"
};
static toDesignSchema_t DoubleSlipSchema2 = {
DoubleSlipPaths2,
"040" "460" "610" "270" "750" "530" "451" "762"
};
static toDesignDesc_t DoubleSlipDesc = {
NTO_D_SLIP,
N_("Double Slipswitch"),
1,
COUNT( DoubleSlipLines ), DoubleSlipLines,
COUNT( DoubleSlipFloats ), DoubleSlipFloats,
&DoubleSlipSchema, 1
};
#ifndef MKTURNOUT
static wLines_t RightCrossoverLines[] = {
#include "torcross.lin"
};
static toDesignFloat_t RightCrossoverFloats[] = {
{ { 200, 10 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e },
{ { 90, 85 }, I_TOOFFSET+0, N_("Separation"), N_("Separation"), Dim_e }
};
static signed char RightCrossoverPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 0, 3, 4, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 3, 5, 6, 7, 2, 0, 0, 0
};
static toDesignSchema_t RightCrossoverSchema = {
RightCrossoverPaths,
"060" "610" "280" "830" "892" "970" "761"
};
static toDesignDesc_t RightCrossoverDesc = {
NTO_R_CROSSOVER,
N_("Right Crossover"),
1,
COUNT( RightCrossoverLines ), RightCrossoverLines,
COUNT( RightCrossoverFloats ), RightCrossoverFloats,
&RightCrossoverSchema, 0
};
#endif
#ifndef MKTURNOUT
static wLines_t LeftCrossoverLines[] = {
#include "tolcross.lin"
};
static toDesignFloat_t LeftCrossoverFloats[] = {
{ { 200, 10 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e },
{ { 90, 85 }, I_TOOFFSET+0, N_("Separation"), N_("Separation"), Dim_e }
};
static signed char LeftCrossoverPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 0, 3, 4, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 5, 6, 7, 4, 0, 0, 0
};
static toDesignSchema_t LeftCrossoverSchema = {
LeftCrossoverPaths,
"040" "410" "2A0" "A30" "451" "5B0" "BA2"
};
static toDesignDesc_t LeftCrossoverDesc = {
NTO_L_CROSSOVER,
N_("Left Crossover"),
1,
COUNT( LeftCrossoverLines ), LeftCrossoverLines,
COUNT( LeftCrossoverFloats ), LeftCrossoverFloats,
&LeftCrossoverSchema, 0
};
#endif
static wLines_t DoubleCrossoverLines[] = {
#include "todcross.lin"
};
static toDesignFloat_t DoubleCrossoverFloats[] = {
{ { 200, 10 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e },
{ { 90, 85 }, I_TOOFFSET+0, N_("Separation"), N_("Separation"), Dim_e }
};
static signed char DoubleCrossoverPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 2, 3, 0, 4, 5, 6, 0, 0,
'R', 'e', 'v', 'e', 'r', 's', 'e', 0, 1, 7, 8, 9, 6, 0, 4, 10, 11, 12, 3, 0, 0, 0
};
static toDesignSchema_t DoubleCrossoverSchema = {
DoubleCrossoverPaths,
"040" "460" "610" "280" "8A0" "A30" "451" "5B0" "BA2" "892" "970" "761"
};
static toDesignDesc_t DoubleCrossoverDesc = {
NTO_D_CROSSOVER,
N_("Double Crossover"),
1,
COUNT( DoubleCrossoverLines ), DoubleCrossoverLines,
COUNT( DoubleCrossoverFloats ), DoubleCrossoverFloats,
&DoubleCrossoverSchema, 0
};
static wLines_t StrSectionLines[] = {
#include "tostrsct.lin"
};
static toDesignFloat_t StrSectionFloats[] = {
{ { 200, 10 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e }
};
static signed char StrSectionPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 0, 0, 0
};
static toDesignSchema_t StrSectionSchema = {
StrSectionPaths,
"010"
};
static toDesignDesc_t StrSectionDesc = {
NTO_STR_SECTION,
N_("Straight Section"),
1,
COUNT( StrSectionLines ), StrSectionLines,
COUNT( StrSectionFloats ), StrSectionFloats,
&StrSectionSchema, 0
};
static wLines_t CrvSectionLines[] = {
#include "tocrvsct.lin"
};
static toDesignFloat_t CrvSectionFloats[] = {
{ { 225, 90 }, I_TOLENGTH+0, N_("Radius"), N_("Radius"), Dim_e },
{ { 225, 140}, I_TOANGLE+0, N_("Angle (Degrees)"), N_("Angle"), Angle_e }
};
static signed char CrvSectionPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 0, 0, 0
};
static toDesignSchema_t CrvSectionSchema = {
CrvSectionPaths,
"011"
};
static toDesignDesc_t CrvSectionDesc = {
NTO_CRV_SECTION,
N_("Curved Section"),
1,
COUNT( CrvSectionLines ), CrvSectionLines,
COUNT( CrvSectionFloats ), CrvSectionFloats,
&CrvSectionSchema, 0
};
#ifdef LATER
static wLines_t BumperLines[] = {
#include "tostrsct.lin"
};
static toDesignFloat_t BumperFloats[] = {
{ { 200, 10 }, I_TOLENGTH+0, N_("Length"), N_("Length"), Dim_e }
};
static signed char BumperPaths[] = {
'N', 'o', 'r', 'm', 'a', 'l', 0, 1, 0, 0, 0
};
static toDesignSchema_t BumperSchema = {
BumperPaths,
"010"
};
static toDesignDesc_t BumperDesc = {
NTO_BUMPER,
N_("Bumper Section"),
1,
COUNT( BumberLines ), BumperLines,
COUNT( BumperFloats ), BumperFloats,
&BumperSchema, 0
};
static wLines_t TurntableLines[] = {
#include "tostrsct.lin"
};
static toDesignFloat_t TurntableFloats[] = {
{ { 200, 10 }, I_TOOFFSET+0, N_("Offset"), N_("Count"), 0 },
{ { 200, 10 }, I_TOLENGTH+0, N_("Length"), N_("Radius1"), Dim_e },
{ { 200, 10 }, I_TOLENGTH+1, N_("Length"), N_("Radius2"), Dim_e }
};
static signed char TurntablePaths[] = {
'1', 0, 1, 0, 0,
'2', 0, 2, 0, 0,
'3', 0, 3, 0, 0,
'4', 0, 4, 0, 0,
'5', 0, 5, 0, 0,
'6', 0, 6, 0, 0,
'7', 0, 7, 0, 0,
'8', 0, 8, 0, 0,
'9', 0, 9, 0, 0,
'1', '0', 0, 10, 0, 0,
'1', '1', 0, 11, 0, 0,
'1', '2', 0, 12, 0, 0,
'1', '3', 0, 13, 0, 0,
'1', '4', 0, 14, 0, 0,
'1', '5', 0, 15, 0, 0,
'1', '6', 0, 16, 0, 0,
'1', '7', 0, 17, 0, 0,
'1', '8', 0, 18, 0, 0,
'1', '9', 0, 19, 0, 0,
'2', '0', 0, 20, 0, 0,
'2', '1', 0, 21, 0, 0,
'2', '2', 0, 22, 0, 0,
'2', '3', 0, 23, 0, 0,
'2', '4', 0, 24, 0, 0,
'2', '5', 0, 25, 0, 0,
'2', '6', 0, 26, 0, 0,
'2', '7', 0, 27, 0, 0,
'2', '8', 0, 28, 0, 0,
'2', '9', 0, 29, 0, 0,
'3', '0', 0, 30, 0, 0,
'3', '1', 0, 31, 0, 0,
'3', '2', 0, 32, 0, 0,
'3', '3', 0, 33, 0, 0,
'3', '4', 0, 34, 0, 0,
'3', '5', 0, 35, 0, 0,
'3', '6', 0, 36, 0, 0,
'3', '7', 0, 37, 0, 0,
'3', '8', 0, 38, 0, 0,
'3', '9', 0, 39, 0, 0,
'4', '0', 0, 40, 0, 0,
'4', '1', 0, 41, 0, 0,
'4', '2', 0, 42, 0, 0,
'4', '3', 0, 43, 0, 0,
'4', '4', 0, 44, 0, 0,
'4', '5', 0, 45, 0, 0,
'4', '6', 0, 46, 0, 0,
'4', '7', 0, 47, 0, 0,
'4', '8', 0, 48, 0, 0,
'4', '9', 0, 49, 0, 0,
'5', '0', 0, 50, 0, 0,
'5', '1', 0, 51, 0, 0,
'5', '2', 0, 52, 0, 0,
'5', '3', 0, 53, 0, 0,
'5', '4', 0, 54, 0, 0,
'5', '5', 0, 55, 0, 0,
'5', '6', 0, 56, 0, 0,
'5', '7', 0, 57, 0, 0,
'5', '8', 0, 58, 0, 0,
'5', '9', 0, 59, 0, 0,
'6', '0', 0, 60, 0, 0,
'6', '1', 0, 61, 0, 0,
'6', '2', 0, 62, 0, 0,
'6', '3', 0, 63, 0, 0,
'6', '4', 0, 64, 0, 0,
'6', '5', 0, 65, 0, 0,
'6', '6', 0, 66, 0, 0,
'6', '7', 0, 67, 0, 0,
'6', '8', 0, 68, 0, 0,
'6', '9', 0, 69, 0, 0,
'7', '0', 0, 70, 0, 0,
'7', '1', 0, 71, 0, 0,
'7', '2', 0, 72, 0, 0,
0
};
static toDesignSchema_t TurntableSchema = {
TurntablePaths,
"010" "020" "030" "040" "050" "060" "070" "080" "090" "0A0" "0B0"
};
static toDesignDesc_t TurntableDesc = {
NTO_TURNTABLE,
N_("Turntable Section"),
1,
COUNT( TurntableLines ), TurntableLines,
COUNT( TurntableFloats ), TurntableFLoats,
&TurntableSchema, 0
};
#endif
#ifndef MKTURNOUT
static toDesignDesc_t * designDescs[] = {
&RegDesc,
&CrvDesc,
&CornuDesc,
&WyeDesc,
&CornuWyeDesc,
&ThreewayDesc,
&CornuThreewayDesc,
&CrossingDesc,
&SingleSlipDesc,
&DoubleSlipDesc,
&RightCrossoverDesc,
&LeftCrossoverDesc,
&DoubleCrossoverDesc,
&StrSectionDesc,
&CrvSectionDesc
};
#endif
/**************************************************************************
*
* Compute Roadbed
*
*/
int debugComputeRoadbed = 0;
#ifdef LATER
typedef struct {
int start;
unsigned long bits;
unsigned long mask;
int width;
} searchTable_t;
static searchTable_t searchTable[] = {
{ 0, 0xFFFF0000, 0xFFFF0000, 32000},
{ 32, 0x0000FFFF, 0x0000FFFF, 32000},
{ 16, 0x00FFFF00, 0x00FFFF00, 16},
{ 8, 0x0FF00000, 0x0FF00000, 8},
{ 24, 0x00000FF0, 0x00000FF0, 8},
{ 4, 0x3C000000, 0x3C000000, 4},
{ 12, 0x003C0000, 0x003C0000, 4},
{ 20, 0x00003C00, 0x00003C00, 4},
{ 28, 0x0000003C, 0x0000003C, 4},
{ 2, 0x60000000, 0x60000000, 2},
{ 6, 0x06000000, 0x06000000, 2},
{ 10, 0x00600000, 0x00600000, 2},
{ 14, 0x00060000, 0x00060000, 2},
{ 18, 0x00006000, 0x00006000, 2},
{ 22, 0x00000600, 0x00000600, 2},
{ 26, 0x00000060, 0x00000060, 2},
{ 30, 0x00000006, 0x00000006, 2},
{ 1, 0x40000000, 0x60000000, 1},
{ 3, 0x10000000, 0x30000000, 1},
{ 5, 0x04000000, 0x06000000, 1},
{ 7, 0x01000000, 0x03000000, 1},
{ 9, 0x00400000, 0x00600000, 1},
{ 11, 0x00100000, 0x00300000, 1},
{ 13, 0x00040000, 0x00060000, 1},
{ 15, 0x00010000, 0x00030000, 1},
{ 17, 0x00004000, 0x00006000, 1},
{ 19, 0x00001000, 0x00003000, 1},
{ 21, 0x00000400, 0x00000600, 1},
{ 23, 0x00000100, 0x00000300, 1},
{ 25, 0x00000040, 0x00000060, 1},
{ 27, 0x00000010, 0x00000030, 1},
{ 29, 0x00000004, 0x00000006, 1},
{ 31, 0x00000001, 0x00000003, 1}
};
#endif
double LineSegDistance( coOrd p, coOrd p0, coOrd p1 )
{
double d, a;
coOrd pp, zero;
zero.x = zero.y = (POS_T)0.0;
d = FindDistance( p0, p1 );
a = FindAngle( p0, p1 );
pp.x = p.x-p0.x;
pp.y = p.y-p0.y;
Rotate( &pp, zero, -a );
if (pp.y < 0.0-EPSILON) {
return FindDistance( p, p0 );
} else if (pp.y > d+EPSILON ) {
return FindDistance( p, p1 );
} else {
return pp.x>=0? pp.x : -pp.x;
}
}
double CircleSegDistance( coOrd p, coOrd c, double r, double a0, double a1 )
{
double d, d0, d1;
double a,aa;
coOrd p1;
d = FindDistance( c, p );
a = FindAngle( c, p );
aa = NormalizeAngle( a - a0 );
d -= r;
if ( aa <= a1 ) {
return d>=0 ? d : -d;
}
PointOnCircle( &p1, c, r, a0 );
d0 = FindDistance( p, p1 );
PointOnCircle( &p1, c, r, a0+a1 );
d1 = FindDistance( p, p1 );
if (d0 < d1) {
return d0;
} else {
return d1;
}
}
BOOL_T HittestTurnoutRoadbed(
trkSeg_p segPtr,
int segCnt,
int segInx,
ANGLE_T side,
int fraction,
DIST_T roadbedWidth )
{
ANGLE_T a;
DIST_T d;
int inx;
trkSeg_p sp;
coOrd p0, p1;
DIST_T dd;
int closest;
sp = &segPtr[segInx];
if (sp->type == SEG_STRTRK) {
d = FindDistance( sp->u.l.pos[0], sp->u.l.pos[1] );
a = FindAngle( sp->u.l.pos[0], sp->u.l.pos[1] );
d *= (fraction*2+1)/64.0;
Translate( &p0, sp->u.l.pos[0], a, d );
Translate( &p0, p0, a+side, roadbedWidth/2.0 );
} else {
d = sp->u.c.radius;
if ( d < 0 ) {
d = -d;
fraction = 31-fraction;
}
a = sp->u.c.a0 + sp->u.c.a1*(fraction*2+1)/64.0;
if (side>0) {
d += roadbedWidth/2.0;
} else {
d -= roadbedWidth/2.0;
}
PointOnCircle( &p0, sp->u.c.center, d, a );
}
dd = DIST_INF;
closest = -1;
for (inx=0; inx<segCnt; inx++) {
sp = &segPtr[inx];
p1 = p0;
switch( sp->type ) {
case SEG_STRTRK:
d = LineSegDistance( p1, sp->u.l.pos[0], sp->u.l.pos[1] );
break;
case SEG_CRVTRK:
d = CircleSegDistance( p1, sp->u.c.center, fabs(sp->u.c.radius), sp->u.c.a0,
sp->u.c.a1 );
break;
default:
continue;
}
#ifdef LATER
if (inx==segInx) {
d *= .999;
}
#endif
if ( d < dd ) {
dd = d;
closest = inx;
}
}
if (closest == segInx) {
return FALSE;
} else {
return TRUE;
}
}
#ifdef LATER
EXPORT long ComputeTurnoutRoadbedSide(
trkSeg_p segPtr,
int segCnt,
int segInx,
ANGLE_T side,
DIST_T roadbedWidth )
{
DIST_T length;
int rbw;
unsigned long res, res1;
searchTable_t * p;
double where;
trkSeg_p sp;
sp = &segPtr[segInx];
if (sp->type == SEG_STRTRK) {
length = FindDistance( sp->u.l.pos[0], sp->u.l.pos[1] );
} else {
length = (fabs(sp->u.c.radius) + (side>0?roadbedWidth/2.0:-roadbedWidth/2.0) ) *
2 * M_PI * sp->u.c.a1 / 360.0;
}
rbw = (int)(roadbedWidth/length*32/2);
/*printf( "L=%0.3f G=%0.3f [%0.3f %0.3f] RBW=%d\n", length, gapWidth, first, last, rbw );*/
res = 0xFF0000FF;
for ( p=searchTable; p<&searchTable[COUNT( searchTable )]; p++) {
if ( (p->width < rbw && res==0xFFFFFFFF) || res==0 ) {
break;
}
res1 = (p->mask & res);
where = p->start*length/32.0;
if (p->width >= rbw || (res1!=p->mask && res1!=0)) {
if (HittestTurnoutRoadbed(segPtr, segCnt, segInx, side, p->start)) {
res &= ~p->bits;
if (debugComputeRoadbed>=1) { printf( "res=%08lx *p={%02d %08lx %08lx %02d} res1=%08lx W=%0.3f HIT\n", res, p->start, p->bits, p->mask, p->width, res1, where ); }
} else {
res |= p->bits;
if (debugComputeRoadbed>=1) { printf( "res=%08lx *p={%02d %08lx %08lx %02d} res1=%08lx W=%0.3f MISS\n", res, p->start, p->bits, p->mask, p->width, res1, where ); }
}
} else {
if (debugComputeRoadbed>=2) { printf( "res=%08lx *p={%02d %08lx %08lx %02d} res1=%08lx W=%0.3f SKIP\n", res, p->start, p->bits, p->mask, p->width, res1, where ); }
}
}
if (debugComputeRoadbed>=1) { printf( "res=%08lx\n", res ); }
return res;
}
#endif
EXPORT long ComputeTurnoutRoadbedSide(
trkSeg_p segPtr,
int segCnt,
int segInx,
ANGLE_T side,
DIST_T roadbedWidth )
{
trkSeg_p sp;
DIST_T length;
int bitWidth;
unsigned long res, mask;
int hit0, hit1, inx0, inx1;
int i, j, k, hitx;
sp = &segPtr[segInx];
if (sp->type == SEG_STRTRK) {
length = FindDistance( sp->u.l.pos[0], sp->u.l.pos[1] );
} else {
length = (fabs(sp->u.c.radius) + (side>0?roadbedWidth/2.0:-roadbedWidth/2.0) ) *
2 * M_PI * sp->u.c.a1 / 360.0;
}
bitWidth = (int)floor(roadbedWidth*32/length);
if ( bitWidth > 31 ) {
bitWidth = 31;
} else if ( bitWidth <= 0 ) {
bitWidth = 2;
}
res = 0;
mask = (1<<bitWidth)-1;
hit0 = HittestTurnoutRoadbed( segPtr, segCnt, segInx, side, 0, roadbedWidth );
inx0 = 0;
inx1 = bitWidth;
if ( debugComputeRoadbed>=3 ) { printf( "bW=%d HT[0]=%d\n", bitWidth, hit0 ); }
while ( 1 ) {
if ( inx1 > 31 ) {
inx1 = 31;
}
hit1 = HittestTurnoutRoadbed( segPtr, segCnt, segInx, side, inx1,
roadbedWidth );
if ( debugComputeRoadbed>=3 ) { printf( " HT[%d]=%d\n", inx1, hit1 ); }
if ( hit0 != hit1 ) {
i=inx0;
j=inx1;
while ( j-i >= 2 ) {
k = (i+j)/2;
hitx = HittestTurnoutRoadbed( segPtr, segCnt, segInx, side, k, roadbedWidth );
if ( debugComputeRoadbed>=3 ) { printf( " .HT[%d]=%d\n", k, hitx ); }
if ( hitx == hit0 ) {
i = k;
} else {
j = k;
}
}
if ( !hit0 ) {
res |= ((1<<(i-inx0+1))-1)<<inx0;
} else {
res |= ((1<<(inx1-j))-1)<<j;
}
} else if ( !hit1 ) {
res |= mask;
}
if ( debugComputeRoadbed>=3 ) { printf( " res=%lx\n", res ); }
if ( inx1 >= 31 ) {
if ( !hit1 ) {
res |= 0x80000000;
}
break;
}
mask <<= bitWidth;
inx0 = inx1;
inx1 += bitWidth;
hit0 = hit1;
}
if ( debugComputeRoadbed>=2 ) { printf( "S%d %c res=%lx\n", segInx, side>0?'+':'-', res ); }
return (0xFFFFFFFF)&res;
}
static BOOL_T IsNear( coOrd p0, coOrd p1 )
{
DIST_T d;
d = FindDistance( p0, p1 );
return d < 0.05;
}
static void AddRoadbedPieces(
int inx,
ANGLE_T side,
int first,
int last )
{
DIST_T d0, d1;
ANGLE_T a0, a1;
coOrd p0, p1;
trkSeg_p sp, sq;
if (last<=first) {
return;
}
sp = &tempSegs(inx);
if ( sp->type == SEG_STRTRK ) {
d0 = FindDistance( sp->u.l.pos[0], sp->u.l.pos[1] );
a0 = FindAngle( sp->u.l.pos[0], sp->u.l.pos[1] );
d1 = d0*first/32.0;
Translate( &p0, sp->u.l.pos[0], a0, d1 );
Translate( &p0, p0, a0+side, newTurnRoadbedWidth/2.0 );
d1 = d0*last/32.0;
Translate( &p1, sp->u.l.pos[0], a0, d1 );
Translate( &p1, p1, a0+side, newTurnRoadbedWidth/2.0 );
if ( first==0 || last==32 ) {
for ( sq=&tempSegs(0); sq<&tempSegs(tempSegs_da.cnt); sq++ ) {
if ( sq->type == SEG_STRLIN ) {
a1 = FindAngle( sq->u.l.pos[0], sq->u.l.pos[1] );
a1 = NormalizeAngle( a1-a0+0.5 );
if ( first==0 ) {
if ( a1 < 1.0 && IsNear( p0, sq->u.l.pos[1] ) ) {
sq->u.l.pos[1] = p1;
return;
} else if ( a1 > 180.0 && a1 < 181.0 && IsNear( p0, sq->u.l.pos[0] ) ) {
sq->u.l.pos[0] = p1;
return;
}
}
if ( last==32 ) {
if ( a1 < 1.0 && IsNear( p1, sq->u.l.pos[0] ) ) {
sq->u.l.pos[0] = p0;
return;
} else if ( a1 > 180.0 && a1 < 181.0 && IsNear( p1, sq->u.l.pos[1] ) ) {
sq->u.l.pos[1] = p0;
return;
}
}
}
}
}
}
DYNARR_APPEND( trkSeg_t, tempSegs_da, 10 );
sp = &tempSegs(inx);
sq = &tempSegs(tempSegs_da.cnt-1);
sq->lineWidth = newTurnRoadbedLineWidth;
sq->color = newTurnRoadbedColor;
if (sp->type == SEG_STRTRK) {
sq->type = SEG_STRLIN;
sq->u.l.pos[0] = p0;
sq->u.l.pos[1] = p1;
} else {
d0 = sp->u.c.radius;
if ( d0 > 0 ) {
a0 = NormalizeAngle( sp->u.c.a0 + sp->u.c.a1*first/32.0 );
} else {
d0 = -d0;
a0 = NormalizeAngle( sp->u.c.a0 + sp->u.c.a1*(32-last)/32.0 );
}
a1 = sp->u.c.a1*(last-first)/32.0;
if (side>0) {
d0 += newTurnRoadbedWidth/2.0;
} else {
d0 -= newTurnRoadbedWidth/2.0;
}
sq->type = SEG_CRVLIN;
sq->u.c.center = sp->u.c.center;
sq->u.c.radius = d0;
sq->u.c.a0 = a0;
sq->u.c.a1 = a1;
}
}
static void AddRoadbedToOneSide(
int trkCnt,
int inx,
ANGLE_T side )
{
unsigned long res, res1;
int b0, b1;
res = ComputeTurnoutRoadbedSide( &tempSegs(0), trkCnt, inx, side,
newTurnRoadbedWidth );
if ( res == 0L ) {
return;
} else if ( res == 0xFFFFFFFF ) {
AddRoadbedPieces( inx, side, 0, 32 );
} else {
for ( b0=0, res1=0x00000001; res1&&(res1&res); b0++,res1<<=1 );
for ( b1=32,res1=0x80000000; res1&&(res1&res); b1--,res1>>=1 );
AddRoadbedPieces( inx, side, 0, b0 );
AddRoadbedPieces( inx, side, b1, 32 );
}
}
static void AddRoadbed( void )
{
int trkCnt, inx;
trkSeg_p sp;
if ( newTurnRoadbedWidth < newTurnTrackGauge ) {
return;
}
trkCnt = tempSegs_da.cnt;
for ( inx=0; inx<trkCnt; inx++ ) {
sp = &tempSegs(inx);
if ( sp->type!=SEG_STRTRK && sp->type!=SEG_CRVTRK ) {
continue;
}
AddRoadbedToOneSide( trkCnt, inx, +90 );
AddRoadbedToOneSide( trkCnt, inx, -90 );
}
}
/*********************************************************************
*
* Functions
*
*/
static BOOL_T ComputeCurve(
coOrd *p0, coOrd *p1, DIST_T *radius,
DIST_T len, DIST_T off, ANGLE_T angle )
{
coOrd Pf;
coOrd Px, Pc;
DIST_T d;
Pf.x = len;
Pf.y = off;
p0->x = p0->y = 0.0;
/*lprintf( "Angle = %0.3f\n", angle );*/
FindIntersection( &Px, *p0, 90.0, Pf, 90.0-angle );
d = FindDistance( Px, Pf )-newTurnTrackGauge;
if (Px.x < newTurnTrackGauge || d < 0.0) {
NoticeMessage( MSG_TODSGN_NO_CONVERGE, _("Ok"), NULL );
return FALSE;
}
if (Px.x-newTurnTrackGauge < d) {
d = Px.x-newTurnTrackGauge;
}
*radius = d * cos( D2R(angle/2.0) ) / sin( D2R(angle/2.0) );
p0->x = Px.x - *radius * sin( D2R(angle/2.0) ) / cos( D2R(angle/2.0) );
Translate( &Pc, *p0, 0.0, *radius );
PointOnCircle( p1, Pc, *radius, 180.0-angle );
return TRUE;
}
#ifndef MKTURNOUT
/* For Bezier Segs we need to duplicate the subSegs Array as well */
void AppendSegs(dynArr_t * target, dynArr_t * source)
{
#define sourceSegs(N) DYNARR_N( trkSeg_t, *source, N )
#define targetSegs(N) DYNARR_N( trkSeg_t, *target, N )
trkSeg_p src;
for (int i=0; i<source->cnt; i++) {
src = &sourceSegs(i);
addSegBezier(target, src);
}
}
/* Bezier Segs will have subSegs Array - free it before resetting the array */
void ClearSegs(dynArr_t * target)
{
for (int i=0; i<(*target).cnt; i++) {
if (targetSegs(i).type == SEG_BEZTRK) {
// Free DA if a BEZTRK
DYNARR_FREE( trkSeg_t, targetSegs(i).bezSegs );
} else {
// Otherwise just clear it
DYNARR_INIT( trkSeg_t, targetSegs(i).bezSegs );
}
}
DYNARR_RESET( trkSeg_t, *target );
}
BOOL_T CallCornuNoBez(coOrd pos[2], coOrd center[2], ANGLE_T angle[2],
DIST_T radius[2], dynArr_t * array_p)
{
dynArr_t temp_array;
DYNARR_INIT(trkSeg_t,temp_array);
wBool_t rc = CallCornu0(pos,center,angle,radius, &temp_array, FALSE);
if (!rc) { return FALSE; }
for (int i=0; i<temp_array.cnt; i++) {
trkSeg_p from_seg = &DYNARR_N(trkSeg_t,temp_array,i);
if ((from_seg->type == SEG_BEZTRK) || (from_seg->type == SEG_BEZLIN)) {
for (int j=0; j<from_seg->bezSegs.cnt; j++) {
trkSeg_p sub_seg = &DYNARR_N(trkSeg_t,from_seg->bezSegs,j);
DYNARR_APPEND(trkSeg_t,*array_p,5);
trkSeg_p to_seg = &DYNARR_N(trkSeg_t,*array_p,(*array_p).cnt-1);
to_seg->u = sub_seg->u;
to_seg->type = sub_seg->type;
to_seg->color = wDrawColorBlack;
to_seg->lineWidth = sub_seg->lineWidth;
}
} else {
DYNARR_APPEND(trkSeg_t,*array_p,5);
trkSeg_p to_seg = &DYNARR_N(trkSeg_t,*array_p,(*array_p).cnt-1);
to_seg->u = from_seg->u;
to_seg->type = from_seg->type;
to_seg->color = wDrawColorBlack;
to_seg->lineWidth = from_seg->lineWidth;
}
}
ClearSegs(&temp_array);
return TRUE;
}
#endif
static toDesignSchema_t * LoadSegs(
toDesignDesc_t * dp,
wBool_t loadPoints )
{
wIndex_t s;
int p, p0, p1;
DIST_T d;
toDesignSchema_t * pp;
char *segOrder;
coOrd pos;
wIndex_t segCnt = 0;
ANGLE_T angle0, angle1, angle2, angle3;
trkSeg_p segPtr;
#ifndef MKTURNOUT
wIndex_t pathLen;
struct {
coOrd pos[10];
coOrd center[10];
DIST_T radius[10];
DIST_T angle[10];
} cornuData;
#endif
DYNARR_RESET( trkSeg_t, tempSegs_da );
angle0 = newTurnAngle0;
angle1 = newTurnAngle1;
angle2 = newTurnAngle2;
angle3 = newTurnAngle3;
if ( newTurnAngleMode == 0 && dp->type != NTO_CRV_SECTION ) {
/* convert from Frog Num to degrees */
if ( angle0 > 0 ) {
angle0 = R2D(asin(1.0 / angle0));
}
if ( angle1 > 0 ) {
angle1 = R2D(asin(1.0 / angle1));
}
if ( angle2 > 0 ) {
angle2 = R2D(asin(1.0 / angle2));
}
if ( angle3 > 0 ) {
angle3 = R2D(asin(1.0 / angle3));
}
}
pp = dp->paths;
if (loadPoints) {
TempEndPtsReset();
// for ( i=0; i<dp->floatCnt; i++ )
// if ( *(FLOAT_T*)(turnDesignPLs[dp->floats[i].index].valueP) == 0.0 )
// if (dp->type != NTO_CORNU &&
// dp->type != NTO_CORNUWYE &&
// dp->type != NTO_CORNU3WAY
// ) {
// NoticeMessage( MSG_TODSGN_VALUES_GTR_0, _("Ok"), NULL );
// return NULL;
// }
switch (dp->type) {
case NTO_REGULAR:
TempEndPtsSet( 3 );
if ( !ComputeCurve( &points[3], &points[4], &radii[0],
(newTurnLen0), fabs(newTurnOff0), angle0 ) ) {
return NULL;
}
radii[0] = - radii[0];
points[0].x = points[0].y = points[1].y = 0.0;
points[1].x = (newTurnLen1);
points[2].y = fabs(newTurnOff0);
points[2].x = (newTurnLen0);
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(1), points[1], 90.0 );
SetEndPt( TempEndPt(2), points[2], 90.0-angle0 );
break;
case NTO_CURVED:
TempEndPtsSet( 3 );
if ( !ComputeCurve( &points[3], &points[4], &radii[0],
(newTurnLen0), fabs(newTurnOff0), angle0 ) ) {
return NULL;
}
if ( !ComputeCurve( &points[5], &points[6], &radii[1],
(newTurnLen1), fabs(newTurnOff1), angle1 ) ) {
return NULL;
}
d = points[3].x - points[5].x;
if ( d < -MIN_TRACK_LENGTH ) {
pp = &Crv3Schema;
} else if ( d > MIN_TRACK_LENGTH ) {
pp = &Crv2Schema;
} else {
pp = &Crv1Schema;
}
radii[0] = - radii[0];
radii[1] = - radii[1];
points[0].x = points[0].y = 0.0;
points[1].y = fabs(newTurnOff0); points[1].x = (newTurnLen0);
points[2].y = fabs(newTurnOff1); points[2].x = (newTurnLen1);
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(2), points[1], 90.0-angle0 );
SetEndPt( TempEndPt(1), points[2], 90.0-angle1 );
break;
#ifndef MKTURNOUT
case NTO_CORNU:
TempEndPtsSet( 3 );
radii[0] = fabs(newTurnRad2); /*Toe*/
radii[1] = fabs(newTurnRad0); /*Inner*/
radii[2] = fabs(newTurnRad1); /*Outer*/
angles[0] = 0.0; /*Base*/
angles[1] = angle0; /*Inner*/
angles[2] = angle1; /*Outer*/
pp = &CornuSchema;
points[0].x = points[0].y = 0.0;
points[1].y = (newTurnOff0); points[1].x = (newTurnLen0); /*Inner*/
points[2].y = (newTurnOff1); points[2].x = (newTurnLen1); /*Outer*/
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(2), points[1], 90.0-angles[1] );
SetEndPt( TempEndPt(1), points[2], 90.0-angles[2] );
break;
#endif
case NTO_WYE:
case NTO_3WAY:
TempEndPtsSet( (dp->type==NTO_3WAY)?4:3 );
if ( !ComputeCurve( &points[3], &points[4], &radii[0],
(newTurnLen0), fabs(newTurnOff0), angle0 ) ) {
return NULL;
}
if ( !ComputeCurve( &points[5], &points[6], &radii[1],
(newTurnLen1), fabs(newTurnOff1), angle1 ) ) {
return NULL;
}
points[5].y = - points[5].y;
points[6].y = - points[6].y;
radii[0] = - radii[0];
points[0].x = points[0].y = 0.0;
points[1].y = fabs(newTurnOff0);
points[1].x = (newTurnLen0);
points[2].y = -fabs(newTurnOff1);
points[2].x = (newTurnLen1);
points[7].y = 0;
points[7].x = (newTurnLen2);
d = points[3].x - points[5].x;
if ( d < -MIN_TRACK_LENGTH ) {
pp = (dp->type==NTO_3WAY ? &Tri3Schema : &Wye3Schema );
} else if ( d > MIN_TRACK_LENGTH ) {
pp = (dp->type==NTO_3WAY ? &Tri2Schema : &Wye2Schema );
} else {
pp = (dp->type==NTO_3WAY ? &Tri1Schema : &Wye1Schema );
}
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(1), points[1], 90.0-angle0 );
SetEndPt( TempEndPt(2), points[2], 90.0+angle1 );
if (dp->type == NTO_3WAY) {
SetEndPt( TempEndPt(3), points[7], 90.0 );
}
break;
#ifndef MKTURNOUT
case NTO_CORNUWYE:
case NTO_CORNU3WAY:
TempEndPtsSet( (dp->type==NTO_CORNU3WAY)?4:3 );
/*
* Construct Wye and 3 Way Turnouts with Cornu curves
* 1. Establish where the joint(s) (Toes) are by using the main curve
* 2. Rebuild the segments into a single set using those points
* 3. Build Path statements to suit the segments
* ---------------------------------------------------------------------------------------------
* 7 CornuData. Cheat Sheet - segment array parts
* =============+ Note - 6-7 is at Toe2 and 8-9 at Toe1 if RH comes before LH
* // Toe 2 - Toe2 and Toe1 are the same (no 2-3) if co-incident
* 0 6+ 3 4 5 - Toe2, 2-3 and 4-5 all only exist for 3WAY not WYE
* +=====+ +=====+ +==================+ - If zero radius at 0, curve starts at Toe 1
* 1 2 8+
* Toe 1 \\ 9
* =========+
*
* ---------------------------------------------------------------------------------------------
*/
radii[0] = (newTurnRad2); /*Base*/
radii[1] = (newTurnRad0); /*Left*/
radii[2] = (newTurnRad1); /*Right*/
radii[3] = (newTurnRad3); /*Center*/
angles[0] = 0.0; /*Base*/
angles[1] = angle0; /*Left*/
angles[2] = angle1; /*Right*/
angles[3] = angle3; /*Center*/
points[0].x = points[0].y = 0.0; /*Base*/
points[1].y = (newTurnOff0); /* Left */
points[1].x = (newTurnLen0);
points[2].y = -(newTurnOff1); /* Right */
points[2].x = (newTurnLen1);
if (dp->type==NTO_CORNU3WAY) {
points[3].y = (newTurnOff3); /* Center */
points[3].x = (newTurnLen3);
}
pp = (dp->type==NTO_CORNU3WAY ? &CornuTriSchema : &CornuWyeSchema );
SetEndPt( TempEndPt(0), points[0], 270.0 );
if (newTurnRad0<0.0) {
SetEndPt( TempEndPt(1), points[1], 90.0+angles[1] );
} else {
SetEndPt( TempEndPt(1), points[1], 90.0-angles[1] );
}
if (newTurnRad1<0.0) {
SetEndPt( TempEndPt(2), points[2], 90.0-angles[2] );
} else {
SetEndPt( TempEndPt(2), points[2], 90.0+angles[2] );
}
if (dp->type == NTO_CORNU3WAY) {
if (newTurnRad3<0.0) {
SetEndPt( TempEndPt(3), points[3], 90.0+angles[3] );
} else {
SetEndPt( TempEndPt(3), points[3], 90.0-angles[3] );
}
}
DIST_T end_length = MIN_TRACK_LENGTH;
for (int i=0; i<((dp->type==NTO_CORNU3WAY)?4:3); i++) {
if (radii[i] == 0.0) {
if (i==2) {
Translate(&end_points[i], points[i], NormalizeAngle(90.0+angles[i]+180),
end_length);
} else {
Translate(&end_points[i], points[i],
NormalizeAngle(90.0-angles[i]+(i==0?0.0:180.0)), end_length);
}
end_angles[i] = angles[i];
} else {
if (i!=2) {
if (((i==0) && radii[0]>0.0) || ((i==1 || i==3) && radii[i]>0.0)) {
Translate(&end_centers[i], points[i], -angles[i], fabs(radii[i]));
} else {
Translate(&end_centers[i], points[i], angles[i]+180, fabs(radii[i]));
}
end_arcs[i] = (radii[i]>=0?1:-1)*R2D(end_length/fabs(radii[i]));
} else {
if (radii[2]>0.0) {
Translate(&end_centers[i], points[i], angles[i]+180, fabs(radii[i]));
} else {
Translate(&end_centers[i], points[i], -angles[i], fabs(radii[i]));
}
end_arcs[i] = (radii[i]>=0?-1:1)*R2D(end_length/fabs(radii[i]));
}
end_points[i] = points[i];
Rotate(&end_points[i],end_centers[i],end_arcs[i]);
end_angles[i] = angles[i]+end_arcs[i];
}
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes0-%d: EP(%f,%f) NEP(%f,%f) EA(%f) NEA(%f) R(%f) ARC(%f) EC(%f,%f) \n",
\
i+1,points[i].x,points[i].y,end_points[i].x,end_points[i].y,angles[i],
end_angles[i],radii[i],end_arcs[i], \
end_centers[i].x,end_centers[i].y) );
}
wBool_t LH_main = TRUE, LH_first = TRUE;
cornuData.pos[0] = end_points[0]; /*Start*/
if (dp->type == NTO_CORNU3WAY) {
if (newTurnToeR < newTurnToeL) { LH_first = FALSE; }
cornuData.pos[1] = end_points[3]; /*Center for First Time */
cornuData.pos[5] = end_points[3]; /*Center for last time*/
} else if (newTurnRad1>=0.0) {
cornuData.pos[1] = end_points[1]; /*Left is dominant curve */
newTurnToeR = newTurnToeL;
} else {
cornuData.pos[1] = end_points[2]; /*Right is dominant */
newTurnToeR = newTurnToeL;
LH_main = FALSE;
}
cornuData.pos[7] = end_points[1]; /*Left*/
cornuData.pos[9] = end_points[2]; /*Right*/
if (dp->type == NTO_CORNU3WAY) {
cornuData.pos[5] = end_points[3]; /*Center */
}
if (radii[0] == 0.0) { /* Base */
cornuData.center[0] = zero;
} else {
cornuData.center[0].x = end_points[0].x;
cornuData.center[0].y = end_points[0].y + radii[0];
}
if (radii[1] == 0.0) { /* Left */
cornuData.center[7] = zero;
} else if (radii[1] >0.0) {
Translate(&cornuData.center[7], cornuData.pos[7], -end_angles[1], radii[1]);
} else {
Translate(&cornuData.center[7], cornuData.pos[7], 180.0+end_angles[1],
radii[1]);
}
if (radii[2] == 0.0) { /* Right */
cornuData.center[9] = zero;
} else if (radii[2] >0.0) {
Translate(&cornuData.center[9], cornuData.pos[9], 180.0+end_angles[2],
radii[2]);
} else {
Translate(&cornuData.center[9], cornuData.pos[9], -end_angles[2], radii[2]);
}
if (dp->type == NTO_CORNU3WAY) {
if (radii[3] == 0.0) { /* Center */
cornuData.center[5] = zero;
} else if (radii[3] >0.0) {
Translate(&cornuData.center[5], cornuData.pos[5], -end_angles[3], radii[3]);
} else {
Translate(&cornuData.center[5], cornuData.pos[5], 180.0+end_angles[3],
radii[3]);
}
}
/* Set up for calculation of Toe(s) */
if (dp->type == NTO_CORNU3WAY) {
cornuData.center[1] =
cornuData.center[5]; /*For Toe1 calc always use center */
cornuData.center[3] =
cornuData.center[5]; /*For Toe2 calc always use center*/
} else if (LH_main) {
cornuData.center[1] = cornuData.center[7]; /* Dominant Curve Left */
} else {
cornuData.center[1] = cornuData.center[9]; /* Right */
}
cornuData.angle[0] = 270.0; /*Always*/
if (dp->type == NTO_CORNU3WAY) {
cornuData.angle[1] = 90.0-end_angles[3];
cornuData.angle[3] = 90.0-end_angles[3];
cornuData.angle[5] = 90.0-end_angles[3]; /* Only used for 3way */
} else if (LH_main) {
cornuData.angle[1] = 90.0-end_angles[1];
} else {
cornuData.angle[1] = 90.0+end_angles[2];
}
cornuData.angle[7] = 90.0-end_angles[1]; /*Left*/
cornuData.angle[9] = 90.0+end_angles[2]; /*Right*/
cornuData.radius[0] = fabs(radii[0]);
if (dp->type == NTO_CORNU3WAY) {
cornuData.radius[1] = fabs(radii[3]);
cornuData.radius[3] = fabs(radii[3]);
cornuData.radius[5] = fabs(radii[3]);
} else if (LH_main) {
cornuData.radius[1] = fabs(radii[1]);
} else {
cornuData.radius[1] = fabs(radii[2]);
}
cornuData.radius[7] = fabs(radii[1]); /*Left*/
cornuData.radius[9] = fabs(radii[2]); /*Right*/
/* Ready to find Toe points */
DYNARR_RESET( trkSeg_t, tempSegs_da );
DIST_T radius = 0.0;
coOrd center;
ANGLE_T angle;
int inx,subSeg;
wBool_t back, neg;
/* Override if a "Y" has zero radius at base to be a straight until the Toe
* We set the start of the curve to be at the Toe position */
if (cornuData.radius[0] == 0.0) {
pos.x = end_points[0].x+(LH_first?newTurnToeL:newTurnToeR)-MIN_TRACK_LENGTH;
pos.y = end_points[0].y;
angle = 90.0;
radius = 0.0;
center = zero;
} else {
/*Find Toe 1 from curve */
CallCornu0(&cornuData.pos[0],&cornuData.center[0],&cornuData.angle[0],
&cornuData.radius[0],&tempSegs_da, FALSE);
/*Get ToeAngle/Radius/Center for first toe */
pos.x = end_points[0].x+(LH_first?newTurnToeL:newTurnToeR);
pos.y = end_points[0].y; /* This will be close to but not on the curve */
angle = GetAngleSegs(tempSegs_da.cnt,&tempSegs(0),&pos,&inx,
NULL,&back,&subSeg,&neg);
segPtr = &DYNARR_N(trkSeg_t, tempSegs_da, inx);
if (segPtr->type == SEG_BEZTRK) {
segPtr = &DYNARR_N(trkSeg_t,segPtr->bezSegs,subSeg);
}
if (segPtr->type == SEG_STRTRK) {
radius = 0.0;
center = zero;
} else if (segPtr->type == SEG_CRVTRK) {
center = segPtr->u.c.center;
radius = fabs(segPtr->u.c.radius);
}
}
/* Set up 2-3 even if we don't use it */
cornuData.pos[1] = pos;
cornuData.center[1] = center;
cornuData.angle[1] = angle;
cornuData.radius[1] = radius;
cornuData.pos[2] = pos;
cornuData.center[2] = center;
cornuData.angle[2] = NormalizeAngle(180.0+angle);
cornuData.radius[2] = radius;
if ((dp->type == NTO_CORNU3WAY) && (newTurnToeR!=newTurnToeL)) {
if (LH_first) {
cornuData.pos[6] = pos;
cornuData.center[6] = center;
cornuData.angle[6] = NormalizeAngle(180.0+angle);
cornuData.radius[6] = radius;
} else {
cornuData.pos[8] = pos;
cornuData.center[8] = center;
cornuData.angle[8] = NormalizeAngle(180.0+angle);
cornuData.radius[8] = radius;
}
} else { /* Just one toe */
cornuData.pos[8] = pos;
cornuData.center[8] = center;
cornuData.angle[8] = NormalizeAngle(180.0+angle);
cornuData.radius[8] = radius;
cornuData.pos[6] = pos;
cornuData.center[6] = center;
cornuData.angle[6] = NormalizeAngle(180.0+angle);
cornuData.radius[6] = radius;
}
if (dp->type == NTO_CORNU3WAY) {
if (newTurnToeR!=newTurnToeL) {
/* Second Toe */
if (cornuData.radius[0] == 0.0) {
pos.x = end_points[0].x+(LH_first?newTurnToeR:newTurnToeL)-MIN_TRACK_LENGTH;
pos.y = 0.0;
angle = 90.0;
radius = 0.0;
center = zero;
} else {
pos.x = end_points[0].x+(LH_first?newTurnToeR:newTurnToeL);
pos.y = end_points[0].y; /* This will be close to but not on the curve */
angle = GetAngleSegs(tempSegs_da.cnt,&tempSegs(0),&pos,&inx,
NULL,&back,&subSeg,&neg);
segPtr = &DYNARR_N(trkSeg_t, tempSegs_da, inx);
if (segPtr->type == SEG_BEZTRK) {
segPtr = &DYNARR_N(trkSeg_t,segPtr->bezSegs,subSeg);
}
if (segPtr->type == SEG_STRTRK) {
radius = 0.0;
center = zero;
} else if (segPtr->type == SEG_CRVTRK) {
center = segPtr->u.c.center;
radius = fabs(segPtr->u.c.radius);
}
}
cornuData.pos[3] = pos;
cornuData.center[3] = center;
cornuData.angle[3] = angle;
cornuData.radius[3] = radius;
cornuData.pos[4] = pos;
cornuData.center[4] = center;
cornuData.angle[4] = NormalizeAngle(180.0+angle);
cornuData.radius[4] = radius;
if (LH_first) {
cornuData.pos[8] = pos;
cornuData.center[8] = center;
cornuData.angle[8] = NormalizeAngle(180.0+angle);
cornuData.radius[8] = radius;
cornuData.pos[4] = pos;
cornuData.center[4] = center;
cornuData.angle[4] = NormalizeAngle(180.0+angle);
cornuData.radius[4] = radius;
} else {
cornuData.pos[6] = pos;
cornuData.center[6] = center;
cornuData.angle[6] = NormalizeAngle(180.0+angle);
cornuData.radius[6] = radius;
cornuData.pos[4] = pos;
cornuData.center[4] = center;
cornuData.angle[4] = NormalizeAngle(180.0+angle);
cornuData.radius[4] = radius;
}
} else { //Set next center start to same place
cornuData.pos[4] = pos;
cornuData.center[4] = center;
cornuData.angle[4] = NormalizeAngle(180.0+angle);
cornuData.radius[4] = radius;
}
}
static dynArr_t cornuSegs_da;
ClearSegs(&tempSegs_da);
ClearSegs(&cornuSegs_da);
int Toe1Seg = 0, Toe2Seg = 0, CenterEndSeg = 0, LeftEndSeg = 0, RightEndSeg = 0;
/* Override if at zero radius at base don't compute end */
if (cornuData.radius[0] == 0.0) {
DYNARR_APPEND(trkSeg_t,tempSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,tempSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = zero;
temp_p->u.l.pos[1] = cornuData.pos[0];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes1: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y ) );
} else {
DYNARR_APPEND(trkSeg_t,tempSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,tempSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = fabs(radii[0]);;
if (radii[0]>0.0) {
temp_p->u.c.a0 = FindAngle(end_centers[0],end_points[0]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[0],points[0]);
}
temp_p->u.c.a1 = fabs(end_arcs[0]);
temp_p->u.c.center = end_centers[0];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes1: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f), EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[0].x,points[0].y,end_points[0].x,end_points[0].y, \
rp0.x,rp0.y,rp1.x,rp1.y) ) ;
}
//If Radius zero, just a straight to the First Toe if offset
if (cornuData.radius[0] == 0.0) {
if ((cornuData.pos[0].x != cornuData.pos[1].x) ||
(cornuData.pos[0].y != cornuData.pos[1].y)) {
DYNARR_APPEND(trkSeg_t,tempSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,tempSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[0];
temp_p->u.l.pos[1] = cornuData.pos[1];
}
} else if ((cornuData.pos[0].x != cornuData.pos[1].x) ||
(cornuData.pos[0].y != cornuData.pos[1].y) ) {
CallCornuNoBez(&cornuData.pos[0],&cornuData.center[0],&cornuData.angle[0],
&cornuData.radius[0],&tempSegs_da);
}
Toe1Seg = tempSegs_da.cnt;
if (dp->type == NTO_CORNU3WAY) {
if (newTurnToeR!=newTurnToeL) {
/* Toe1 to Toe2 in tempSegs array */
if (cornuData.radius[0] == 0.0) {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[2];
temp_p->u.l.pos[1] = cornuData.pos[3];
} else if ((cornuData.pos[2].x != cornuData.pos[3].x) ||
(cornuData.pos[2].y != cornuData.pos[3].y) ) {
CallCornuNoBez(&cornuData.pos[2],&cornuData.center[2],&cornuData.angle[2],
&cornuData.radius[2],&cornuSegs_da);
}
Toe2Seg = cornuSegs_da.cnt+Toe1Seg;
/* Add to second cornu to tempSegs array */
AppendSegs(&tempSegs_da,&cornuSegs_da);
/* Get ready to reuse cornuSegs array*/
ClearSegs(&cornuSegs_da);
} else {
Toe2Seg = Toe1Seg; //No Toe2
}
/* Toe2 to Center in cornuSegs array */
CallCornuNoBez(&cornuData.pos[4],&cornuData.center[4],&cornuData.angle[4],
&cornuData.radius[4],&cornuSegs_da);
if (cornuData.radius[5] == 0.0) {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[5];
temp_p->u.l.pos[1] = points[3];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes2: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y )) ;
} else {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = -radii[3]; //Assumed Left
if (radii[3]>0) {
temp_p->u.c.a0 = FindAngle(end_centers[3],points[3]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[3],end_points[3]);
}
temp_p->u.c.a1 = fabs(end_arcs[3]);
temp_p->u.c.center = end_centers[3];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes2: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f) EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[3].x,points[3].y,end_points[3].x,end_points[3].y, \
rp0.x,rp0.y,rp1.x,rp1.y) );
}
CenterEndSeg = cornuSegs_da.cnt+Toe2Seg;
/* Add to second cornu to tempSegs array */
AppendSegs(&tempSegs_da,&cornuSegs_da);
/* Get ready to reuse cornuSegs array*/
ClearSegs(&cornuSegs_da);
} else {
CenterEndSeg = Toe2Seg = Toe1Seg; //No Toe2, No Center
}
/* Left in cornuSegs array*/
CallCornuNoBez(&cornuData.pos[6],&cornuData.center[6],&cornuData.angle[6],
&cornuData.radius[6],&cornuSegs_da);
if (cornuData.radius[7] == 0.0) {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[7];
temp_p->u.l.pos[1] = points[1];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes2: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y ) );
} else {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = -radii[1]; //Negative relative to left
if (radii[1]>0) {
temp_p->u.c.a0 = FindAngle(end_centers[1],points[1]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[1],end_points[1]);
}
temp_p->u.c.a1 = fabs(end_arcs[1]);
temp_p->u.c.center = end_centers[1];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes2: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f) EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[1].x,points[1].y,end_points[1].x,end_points[1].y, \
rp0.x,rp0.y,rp1.x,rp1.y) );
}
LeftEndSeg = cornuSegs_da.cnt+CenterEndSeg;
/* Add to second cornu to tempSegs array */
AppendSegs(&tempSegs_da,&cornuSegs_da);
/* Get ready to reuse cornuSegs array*/
ClearSegs(&cornuSegs_da);
/* Right in cornuSegs array*/
CallCornuNoBez(&cornuData.pos[8],&cornuData.center[8],&cornuData.angle[8],
&cornuData.radius[8],&cornuSegs_da);
if (cornuData.radius[9] == 0.0) {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[9];
temp_p->u.l.pos[1] = points[2];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes2: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y ) );
} else {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = radii[2];
if (radii[2]>0) {
temp_p->u.c.a0 = FindAngle(end_centers[2],cornuData.pos[9]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[2],end_points[2]);
}
temp_p->u.c.a1 = fabs(end_arcs[2]);
temp_p->u.c.center = end_centers[2];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes2: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f) EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[2].x,points[2].y,end_points[2].x,end_points[2].y, \
rp0.x,rp0.y,rp1.x,rp1.y) );
}
RightEndSeg = cornuSegs_da.cnt+LeftEndSeg;
/*Add Third Part to tempSegs Array */
AppendSegs(&tempSegs_da,&cornuSegs_da);
/* Safety - clear out cornu Array */
ClearSegs(&cornuSegs_da);
if (tempSegs_da.cnt >128 ) {
NoticeMessage( MSG_TODSGN_CORNU_TOO_COMPLEX, _("Ok"), NULL );
return NULL;
}
/* Generate Paths */
static char pathChar[512];
if (dp->type == NTO_CORNU3WAY) {
strcpy(pathChar,"Normal"); /* Also resets array */
pathLen = (wIndex_t)strlen(pathChar)+1;
for (uint8_t i=0; i<CenterEndSeg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
sprintf(&pathChar[pathLen],"%s","Left");
pathLen += (wIndex_t)strlen(&pathChar[pathLen])+1;
} else {
strcpy(pathChar,"Left");
pathLen = (wIndex_t)strlen(pathChar)+1;
}
for (uint8_t i=0; i<Toe1Seg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
if ((dp->type == NTO_CORNU3WAY) && !LH_first && (newTurnToeR != newTurnToeL)) {
for (uint8_t i=Toe1Seg; i<Toe2Seg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
}
for (uint8_t i=CenterEndSeg; i<LeftEndSeg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
sprintf(&pathChar[pathLen],"%s","Right");
pathLen += (wIndex_t)strlen(&pathChar[pathLen])+1;
for (uint8_t i=0; i<Toe1Seg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
if ((dp->type == NTO_CORNU3WAY) && LH_first && (newTurnToeR != newTurnToeL)) {
for (uint8_t i=Toe1Seg; i<Toe2Seg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
}
for (uint8_t i=LeftEndSeg; i<RightEndSeg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
pp->paths = (signed char *)pathChar;
segCnt = tempSegs_da.cnt;
break;
#endif
case NTO_D_SLIP:
case NTO_S_SLIP:
case NTO_CROSSING:
if (dp->type == NTO_D_SLIP) {
if (newTurnSlipMode == 1) {
pp = &DoubleSlipSchema2;
} else {
pp = &DoubleSlipSchema;
}
}
TempEndPtsSet( 4 );
points[0].x = points[0].y = points[1].y = 0.0;
points[1].x = (newTurnLen0);
pos.y = 0; pos.x = (newTurnLen0)/2.0;
coOrd cpos = pos;
Translate( &points[3], pos, 90.0+angle0, (newTurnLen1)/2.0 );
points[2].y = - points[3].y;
points[2].x = pos.x-(points[3].x-pos.x);
if (dp->type != NTO_CROSSING) {
Translate( &pos, points[3], 90.0+angle0, -newTurnTrackGauge );
if (!ComputeCurve( &points[4], &points[5], &radii[0],
pos.x, fabs(pos.y), angle0 )) { /*???*/
return NULL;
}
radii[1] = - radii[0];
points[5].y = - points[5].y;
points[6].y = 0; points[6].x = cpos.x-(points[4].x-cpos.x);
points[7].y = -points[5].y;
points[7].x = cpos.x-(points[5].x-cpos.x);
}
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(1), points[1], 90.0 );
SetEndPt( TempEndPt(2), points[2], 270.0+angle0 );
SetEndPt( TempEndPt(3), points[3], 90.0+angle0 );
break;
case NTO_R_CROSSOVER:
case NTO_L_CROSSOVER:
case NTO_D_CROSSOVER:
TempEndPtsSet( 4 );
d = (newTurnLen0)/2.0 - newTurnTrackGauge;
if (d < 0.0) {
NoticeMessage( MSG_TODSGN_CROSSOVER_TOO_SHORT, _("Ok"), NULL );
return NULL;
}
angle0 = R2D( atan2( fabs(newTurnOff0), d ) );
points[0].y = 0.0; points[0].x = 0.0;
points[1].y = 0.0; points[1].x = (newTurnLen0);
points[2].y = fabs(newTurnOff0); points[2].x = 0.0;
points[3].y = fabs(newTurnOff0); points[3].x = (newTurnLen0);
if (!ComputeCurve( &points[4], &points[5], &radii[1],
(newTurnLen0)/2.0, fabs(newTurnOff0)/2.0, angle0 ) ) {
return NULL;
}
radii[0] = - radii[1];
points[6].y = 0.0; points[6].x = (newTurnLen0)-points[4].x;
points[7].y = points[5].y; points[7].x = (newTurnLen0)-points[5].x;
points[8].y = fabs(newTurnOff0); points[8].x = points[4].x;
points[9].y = fabs(newTurnOff0)-points[5].y; points[9].x = points[5].x;
points[10].y = fabs(newTurnOff0); points[10].x = points[6].x;
points[11].y = points[9].y; points[11].x = points[7].x;
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(1), points[1], 90.0 );
SetEndPt( TempEndPt(2), points[2], 270.0 );
SetEndPt( TempEndPt(3), points[3], 90.0 );
break;
case NTO_STR_SECTION:
TempEndPtsSet( 2 );
points[0].y = points[0].x = 0;
points[1].y = 0/*(newTurnOff1)*/; points[1].x = (newTurnLen0);
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(1), points[1], 90.0 );
break;
case NTO_CRV_SECTION:
TempEndPtsSet( 2 );
points[0].y = points[0].x = 0;
points[1].y = (newTurnLen0) * (1.0 - cos( D2R(angle0) ) );
points[1].x = (newTurnLen0) * sin( D2R(angle0) );
radii[0] = -(newTurnLen0);
SetEndPt( TempEndPt(0), points[0], 270.0 );
SetEndPt( TempEndPt(1), points[1], 90.0-angle0 );
break;
case NTO_BUMPER:
TempEndPtsSet( 1 );
points[0].y = points[0].x = 0;
points[1].y = 0/*(newTurnOff1)*/; points[1].x = (newTurnLen0);
SetEndPt( TempEndPt(0), points[0], 270.0 );
break;
default:
;
}
} else {
switch (dp->type) {
case NTO_CURVED:
d = points[3].x - points[5].x;
if ( d < -MIN_TRACK_LENGTH ) {
pp = &Crv3Schema;
} else if ( d > MIN_TRACK_LENGTH ) {
pp = &Crv2Schema;
} else {
pp = &Crv1Schema;
}
break;
}
}
#ifndef MKTURNOUT
if(dp->type == NTO_CORNU) {
DIST_T end_length = MIN_TRACK_LENGTH;
// Adjust end_points to impose small fixed end segments
for (int i=0; i<3; i++) {
if (radii[i] == 0.0) {
Translate(&end_points[i], points[i], 90-angles[i]+(i==0?0:180), end_length);
end_angles[i] = angles[i];
} else {
Translate(&end_centers[i], points[i], -angles[i], radii[i]);
end_arcs[i] = (radii[i]>=0?1:-1)*R2D(end_length/fabs(radii[i]));
end_points[i] = points[i];
Rotate(&end_points[i],end_centers[i],(i>0?1:-1)*end_arcs[i]);
end_angles[i] = angles[i]-(i>0?1:-1)*end_arcs[i];
}
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes0-%d: EP(%f,%f) NEP(%f,%f) EA(%f) NEA(%f) R(%f) ARC(%f) EC(%f,%f) \n",
\
i+1,points[i].x,points[i].y,end_points[i].x,end_points[i].y,angles[i],
end_angles[i],radii[i],end_arcs[i], \
end_centers[i].x,end_centers[i].y) );
}
cornuData.pos[0] = end_points[0]; /*Start*/
cornuData.pos[1] = end_points[2]; /*Outer*/
cornuData.pos[3] = end_points[2]; /*Outer for second time*/
cornuData.pos[5] = end_points[1]; /*Inner*/
if (radii[0] == 0.0) { /* Toe */
cornuData.center[0] = zero;
} else {
cornuData.center[0].x = end_points[0].x;
cornuData.center[0].y = end_points[0].y + radii[0];
}
if (radii[1] == 0.0) { /* Inner */
cornuData.center[5] = zero;
} else {
Translate(&cornuData.center[5], cornuData.pos[5], -end_angles[1], radii[1]);
}
if (radii[2] == 0.0) { /* Outer */
cornuData.center[1] = zero;
} else {
Translate(&cornuData.center[1], cornuData.pos[1], -end_angles[2], radii[2]);
}
cornuData.center[3] = cornuData.center[1];
cornuData.angle[0] = 270.0;
cornuData.angle[1] = 90.0-end_angles[2];
cornuData.angle[3] = 90.0-end_angles[2];
cornuData.angle[5] = 90.0-end_angles[1]; /*Inner*/
cornuData.radius[0] = fabs(radii[0]);
cornuData.radius[1] = fabs(radii[2]);
cornuData.radius[3] = fabs(radii[2]);
cornuData.radius[5] = fabs(radii[1]); /*Inner*/
DYNARR_RESET( trkSeg_t, tempSegs_da );
/*Map out the full outer curve */
CallCornu0(&cornuData.pos[0],&cornuData.center[0],&cornuData.angle[0],
&cornuData.radius[0],&tempSegs_da, FALSE);
/*Get ToeAngle/Radius/Center */
int inx,subSeg;
wBool_t back, neg;
DIST_T radius = 0.0;
coOrd center;
pos.x = end_points[0].x+newTurnToeL-MIN_TRACK_LENGTH;
pos.y = end_points[0].y; /* This will be close to but not on the curve */
ANGLE_T angle = GetAngleSegs(tempSegs_da.cnt,&tempSegs(0),&pos,
&inx,NULL,&back,&subSeg,&neg);
segPtr = &DYNARR_N(trkSeg_t, tempSegs_da, inx);
if (segPtr->type == SEG_BEZTRK) {
segPtr = &DYNARR_N(trkSeg_t,segPtr->bezSegs,subSeg);
}
if (segPtr->type == SEG_STRTRK) {
radius = 0.0;
center = zero;
} else if (segPtr->type == SEG_CRVTRK) {
center = segPtr->u.c.center;
radius = fabs(segPtr->u.c.radius);
}
cornuData.pos[1] = pos;
cornuData.center[1] = center;
cornuData.angle[1] = angle;
cornuData.radius[1] = radius;
cornuData.pos[2] = pos;
cornuData.center[2] = center;
cornuData.angle[2] = NormalizeAngle(180.0+angle);
cornuData.radius[2] = radius;
cornuData.pos[4] = pos;
cornuData.center[4] = center;
cornuData.angle[4] = NormalizeAngle(180.0+angle);
cornuData.radius[4] = radius;
static dynArr_t cornuSegs_da;
ClearSegs(&tempSegs_da);
ClearSegs(&cornuSegs_da);
/* Override if at zero radius at base don't compute end */
if (cornuData.radius[0] == 0.0) {
DYNARR_APPEND(trkSeg_t,tempSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,tempSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = zero;
temp_p->u.l.pos[1] = cornuData.pos[1];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes1: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y ) );
} else {
DYNARR_APPEND(trkSeg_t,tempSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,tempSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = -radii[0];
if (radii[0]>0.0) {
temp_p->u.c.a0 = FindAngle(end_centers[0],end_points[0]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[0],points[0]);
}
temp_p->u.c.a1 = fabs(end_arcs[0]);
temp_p->u.c.center = end_centers[0];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes1: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f), EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[0].x,points[0].y,end_points[0].x,end_points[0].y, \
rp0.x,rp0.y,rp1.x,rp1.y) );
/* Base to Toe in tempSegs array */
CallCornuNoBez(&cornuData.pos[0],&cornuData.center[0],& cornuData.angle[0],
&cornuData.radius[0],&tempSegs_da);
}
int ToeSeg = tempSegs_da.cnt;
/* Toe to Outer in cornuSegs array */
CallCornuNoBez(&cornuData.pos[2],&cornuData.center[2],&cornuData.angle[2],
&cornuData.radius[2],&cornuSegs_da);
if (cornuData.radius[3] == 0.0) {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[3];
temp_p->u.l.pos[1] = end_points[2];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes2: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y ) );
} else {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = -radii[2];
if (radii[2]>0) {
temp_p->u.c.a0 = FindAngle(end_centers[2],points[2]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[2],end_points[2]);
}
temp_p->u.c.a1 = fabs(end_arcs[2]);
temp_p->u.c.center = end_centers[2];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes2: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f) EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[2].x,points[2].y,end_points[2].x,end_points[2].y, \
rp0.x,rp0.y,rp1.x,rp1.y) );
}
int OuterEndSeg = cornuSegs_da.cnt + ToeSeg;
/* Add to second cornu to tempSegs array */
AppendSegs(&tempSegs_da,&cornuSegs_da);
/* Get ready to reuse cornuSegs array*/
ClearSegs(&cornuSegs_da);
/* Toe to Inner in cornuSegs array*/
CallCornuNoBez(&cornuData.pos[4],&cornuData.center[4],&cornuData.angle[4],
&cornuData.radius[4],&cornuSegs_da);
if (cornuData.radius[5] == 0.0) {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_STRTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.l.pos[0] = cornuData.pos[5];
temp_p->u.l.pos[1] = points[1];
LOG( log_cornuturnoutdesigner, 1, ( "ctoDes3: P0(%f,%f) P1(%f,%f) \n", \
temp_p->u.l.pos[0].x,temp_p->u.l.pos[0].y,temp_p->u.l.pos[1].x,
temp_p->u.l.pos[1].y ) );
} else {
DYNARR_APPEND(trkSeg_t,cornuSegs_da,1);
trkSeg_p temp_p = &DYNARR_LAST(trkSeg_t,cornuSegs_da);
temp_p->type = SEG_CRVTRK;
temp_p->color = wDrawColorBlack;
temp_p->lineWidth = 0.0;
temp_p->u.c.radius = -radii[1];
if (radii[1]>0) {
temp_p->u.c.a0 = FindAngle(end_centers[1],points[1]);
} else {
temp_p->u.c.a0 = FindAngle(end_centers[1],end_points[1]);
}
temp_p->u.c.a1 = fabs(end_arcs[1]);
temp_p->u.c.center = end_centers[1];
coOrd rp0,rp1;
Translate(&rp0,temp_p->u.c.center,temp_p->u.c.a0,temp_p->u.c.radius);
Translate(&rp1,temp_p->u.c.center,temp_p->u.c.a0+temp_p->u.c.a1,
temp_p->u.c.radius);
LOG( log_cornuturnoutdesigner, 1,
( "ctoDes3: R(%f) A0(%f) A1(%f) C(%f,%f) P(%f,%f) EP(%f,%f) RP0(%f,%f) RP1(%f,%f)\n",
\
temp_p->u.c.radius,temp_p->u.c.a0,temp_p->u.c.a1,temp_p->u.c.center.x,
temp_p->u.c.center.y, \
points[1].x,points[1].y,end_points[1].x,end_points[1].y, \
rp0.x,rp0.y,rp1.x,rp1.y) );
}
int InnerEndSeg = cornuSegs_da.cnt + OuterEndSeg;
/*Add Third Part to tempSegs Array */
AppendSegs(&tempSegs_da,&cornuSegs_da);
/* Safety - clear out cornu Array */
ClearSegs(&cornuSegs_da);
if (tempSegs_da.cnt >128 ) {
NoticeMessage( MSG_TODSGN_CORNU_TOO_COMPLEX, _("Ok"), NULL );
return NULL;
}
static char pathChar[512];
strcpy(pathChar,"Normal"); /* Also resets array */
pathLen = (wIndex_t)strlen(pathChar)+1;
for (uint8_t i=0; i<OuterEndSeg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
sprintf(&pathChar[pathLen],"%s","Reverse");
pathLen += (wIndex_t)strlen(&pathChar[pathLen])+1;
for (uint8_t i=0; i<ToeSeg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
for (uint8_t i=OuterEndSeg; i<InnerEndSeg; i++) {
pathChar[pathLen] = i+1;
pathLen++;
}
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
pathChar[pathLen] = 0;
pathLen++;
pp->paths = (signed char *)pathChar;
segCnt = tempSegs_da.cnt;
}
#endif
if (!( (dp->type== NTO_CORNU) || (dp->type == NTO_CORNUWYE)
|| (dp->type == NTO_CORNU3WAY))) {
segOrder = pp->segOrder;
segCnt = (wIndex_t)strlen( segOrder );
CHECKMSG( segCnt%3 == 0, ( "%s", dp->label ) );
segCnt /= 3;
DYNARR_SET( trkSeg_t, tempSegs_da, segCnt );
memset( &tempSegs(0), 0, segCnt * sizeof tempSegs(0) );
for ( s=0; s<segCnt; s++ ) {
segPtr = &tempSegs(s);
segPtr->color = wDrawColorBlack;
if (*segOrder <= '9') {
p0 = *segOrder++ - '0';
} else {
p0 = *segOrder++ - 'A' + 10;
}
if (*segOrder <= '9') {
p1 = *segOrder++ - '0';
} else {
p1 = *segOrder++ - 'A' + 10;
}
p = *segOrder++ - '0';
if (p == 3) {
/* cornu */
} else if (p != 0) {
segPtr->type = SEG_CRVTRK;
ComputeCurvedSeg( segPtr, radii[p-1], points[p0], points[p1] );
} else {
segPtr->type = SEG_STRTRK;
segPtr->u.l.pos[0] = points[p0];
segPtr->u.l.pos[1] = points[p1];
}
}
}
AddRoadbed();
#ifndef MKTURNOUT
if ( CheckPaths( segCnt, &tempSegs(0), pp->paths, dp->label ) < 0 ) {
return NULL;
}
#endif
return pp;
}
#ifndef MKTURNOUT
static void CopyNonTracks( turnoutInfo_t * to )
{
trkSeg_p sp0;
for ( sp0=to->segs; sp0<&to->segs[to->segCnt]; sp0++ ) {
if ( sp0->type != SEG_STRTRK && sp0->type != SEG_CRVTRK
&& sp0->type != SEG_BEZTRK ) {
DYNARR_APPEND( trkSeg_t, tempSegs_da, 10 );
tempSegs(tempSegs_da.cnt-1) = *sp0;
}
}
}
static void NewTurnPrint(
void * junk )
{
coOrd pos, p0, p1;
WDOUBLE_T px, py;
int i, j, ii, jj, p;
EPINX_T ep;
wFont_p fp;
coOrd orig, size;
toDesignSchema_t * pp;
POS_T tmp;
FLOAT_T tmpR;
static drawCmd_t newTurnout_d = {
NULL,
&printDrawFuncs,
DC_PRINT,
1.0,
0.0,
{ 0.0, 0.0 },
{ 0.0, 0.0 },
Pix2CoOrd, CoOrd2Pix
};
if ((pp=LoadSegs( curDesign, TRUE )) == NULL) {
return;
}
if (includeNontrackSegments && customTurnout1) {
CopyNonTracks( customTurnout1 );
}
GetSegBounds( zero, 0.0, tempSegs_da.cnt, &tempSegs(0), &orig, &size );
tmp = orig.x; orig.x = orig.y; orig.y = tmp;
#ifdef LATER
size.x = 0.0; size.y = 0.0;
orig.x = 0.0; orig.y = 0.0;
for ( i=0; i<tempSegs_da.cnt; i++ ) {
segPtr = &tempSegs(i);
switch (segPtr->type) {
case SEG_STRLIN:
case SEG_STRTRK:
pos[0] = segPtr->u.l.pos[0];
pos[1] = segPtr->u.l.pos[1];
break;
case SEG_CRVTRK:
case SEG_CRVLIN:
PointOnCircle( &pos[0], segPtr->u.c.center, segPtr->u.c.radius,
segPtr->u.c.a0 );
PointOnCircle( &pos[1], segPtr->u.c.center, segPtr->u.c.radius,
segPtr->u.c.a0+segPtr->u.c.a1 );
}
for ( ep=0; ep<2; ep++ ) {
if (pos[ep].x < orig.x) {
orig.x = pos[ep].x;
}
if (pos[ep].x > size.x) {
size.x = pos[ep].x;
}
if (pos[ep].y < orig.y) {
orig.y = pos[ep].y;
}
if (pos[ep].y > size.y) {
size.y = pos[ep].y;
}
}
}
size.x -= orig.x;
size.y -= orig.y;
#endif
fp = wStandardFont( F_TIMES, FALSE, FALSE );
wPrintGetPageSize( &px, &py );
newTurnout_d.size.x = px;
newTurnout_d.size.y = py;
ii = (int)(size.y/newTurnout_d.size.x)+1;
jj = (int)(size.x/newTurnout_d.size.y)+1;
if ( !wPrintDocStart( sTurnoutDesignerW, ii*jj, NULL ) ) {
return;
}
#ifdef LATER
orig.x -= (0.5);
orig.y -= (jj*newTurnout_d.size.y-size.y)/2.0;
#endif
orig.x = - ( size.y + orig.x + newTurnTrackGauge/2.0 + 0.5 );
orig.y -= (0.5);
coOrd strPos;
for ( i=0, newTurnout_d.orig.x=orig.x; i<ii;
i++, newTurnout_d.orig.x+=newTurnout_d.size.x ) {
for ( j=0, newTurnout_d.orig.y=orig.y; j<jj;
j++, newTurnout_d.orig.y+=newTurnout_d.size.y ) {
newTurnout_d.d = wPrintPageStart();
newTurnout_d.dpi = wDrawGetDPI(newTurnout_d.d);
strPos.x = newTurnout_d.orig.x + 3.0;
sprintf( message, "%s", sProdName );
strPos.y = newTurnout_d.orig.y + 6.75;
DrawString( &newTurnout_d, strPos, 0.0, message, fp, 40, wDrawColorBlack );
sprintf( message, _("%s Designer"), _(curDesign->label) );
strPos.y -= 0.5;
DrawString( &newTurnout_d, strPos, 0.0, message, fp, 20, wDrawColorBlack );
sprintf( message, _("%s %d x %d (of %d x %d)"), _("Page"), i+1, j+1, ii, jj );
strPos.y -= 0.5;
DrawString( &newTurnout_d, strPos, 0.0, message, fp, 20, wDrawColorBlack );
strPos.y -= 0.10;
for ( p=0; p<curDesign->floatCnt; p++ ) {
tmpR = *(FLOAT_T*)(turnDesignPLs[curDesign->floats[p].index].valueP);
sprintf( message, "%s: %s",
(curDesign->floats[p].mode!=Frog_e
||newTurnAngleMode!=0)?_(curDesign->floats[p].printLabel):_("Frog Number"),
curDesign->floats[p].mode==Dim_e?
FormatDistance(tmpR):
FormatFloat(tmpR) );
strPos.y -= 0.25;
DrawString( &newTurnout_d, strPos, 0.0, message, fp, 16, wDrawColorBlack );
}
if (newTurnLeftDesc[0] || newTurnLeftPartno[0]) {
sprintf( message, "%s %s %s", newTurnManufacturer, newTurnLeftPartno,
newTurnLeftDesc );
strPos.y -= 0.25;
DrawString( &newTurnout_d, strPos, 0.0, message, fp, 16, wDrawColorBlack );
}
if (newTurnRightDesc[0] || newTurnRightPartno[0]) {
sprintf( message, "%s %s %s", newTurnManufacturer, newTurnRightPartno,
newTurnRightDesc );
strPos.y -= 0.25;
DrawString( &newTurnout_d, strPos, 0.0, message, fp, 16, wDrawColorBlack );
}
DrawRectangle( &newTurnout_d, newTurnout_d.orig, newTurnout_d.size,
wDrawColorBlack, DRAW_CLOSED );
DrawSegsDA( &newTurnout_d, NULL, zero, 270.0, &tempSegs_da, newTurnTrackGauge,
wDrawColorBlack, 0 );
for ( ep=0; ep<TempEndPtsCount(); ep++ ) {
pos.x = - GetEndPtPos( TempEndPt(ep) ).y;
pos.y = GetEndPtPos( TempEndPt(ep) ).x;
ANGLE_T angle = GetEndPtAngle( TempEndPt(ep) );
Translate( &p0, pos, angle+90+270.0,
newTurnTrackGauge );
Translate( &p1, pos, angle+270+270.0,
newTurnTrackGauge );
DrawLine( &newTurnout_d, p0, p1, 0, wDrawColorBlack );
Translate( &p0, pos, angle+270.0,
newTurnout_d.size.y/2.0 );
DrawStraightTrack( &newTurnout_d, pos, p0,
angle+270.0,
NULL, wDrawColorBlack, 0 );
}
if ( !wPrintPageEnd( newTurnout_d.d ) ) {
goto quitPrinting;
}
}
}
quitPrinting:
wPrintDocEnd();
}
#endif
static char * BuildTrimedTitle( char * cp, const char * sep, const char * mfg,
const char * desc, const char * partno )
{
cp = Strcpytrimed( cp, mfg, FALSE );
strcpy( cp, sep );
cp += strlen(cp);
cp = Strcpytrimed( cp, desc, FALSE );
strcpy( cp, sep );
cp += strlen(cp);
cp = Strcpytrimed( cp, partno, FALSE );
return cp;
}
static void NewTurnOk( void * context )
{
FILE * f;
toDesignSchema_t * pp;
int i;
char * cp;
#ifndef MKTURNOUT
BOOL_T foundR=FALSE;
turnoutInfo_t *to;
#endif
FLOAT_T flt;
char * customInfoP;
coOrd pos;
ANGLE_T angle;
#ifndef MKTURNOUT
if ( ! ParamCheckInputs( &turnDesignPG, (wControl_p)turnDesignPG.okB ) ) {
return;
}
#endif
if ((pp=LoadSegs( curDesign, TRUE )) == NULL) {
return;
}
// if ( (curDesign->strCnt >= 1 && newTurnLeftDesc[0] == 0) ||
// (curDesign->strCnt >= 2 && newTurnRightDesc[0] == 0) ) {
// NoticeMessage( MSG_TODSGN_DESC_NONBLANK, _("Ok"), NULL );
// return;
// }
BuildTrimedTitle( message, "\t", newTurnManufacturer, newTurnLeftDesc,
newTurnLeftPartno );
#ifndef MKTURNOUT
if ( customTurnout1 == NULL &&
( foundR || FindCompound( FIND_TURNOUT, newTurnScaleName, message ) ) ) {
if ( !NoticeMessage( MSG_TODSGN_REPLACE, _("Yes"), _("No") ) ) {
return;
}
}
SetCLocale();
#endif
f = OpenCustom("a");
sprintf( tempCustom, "\"%s\" \"%s\" \"",
curDesign->label, "" );
cp = tempCustom + strlen(tempCustom);
cp = Strcpytrimed( cp, newTurnManufacturer, TRUE );
strcpy( cp, "\" \"" );
cp += 3;
cp = Strcpytrimed( cp, newTurnLeftDesc, TRUE );
strcpy( cp, "\" \"" );
cp += 3;
cp = Strcpytrimed( cp, newTurnLeftPartno, TRUE );
strcpy( cp, "\"" );
cp += 1;
if (curDesign->type == NTO_REGULAR || curDesign->type == NTO_CURVED
|| curDesign->type == NTO_CORNU ) {
strcpy( cp, " \"" );
cp += 2;
cp = Strcpytrimed( cp, newTurnRightDesc, TRUE );
strcpy( cp, "\" \"" );
cp += 3;
cp = Strcpytrimed( cp, newTurnRightPartno, TRUE );
strcpy( cp, "\"" );
cp += 1;
}
CHECK( cp-tempCustom <= sizeof tempCustom );
for ( i=0; i<curDesign->floatCnt; i++ ) {
flt = *(FLOAT_T*)(turnDesignPLs[curDesign->floats[i].index].valueP);
switch( curDesign->floats[i].mode ) {
case Dim_e:
flt = ( flt );
break;
case Frog_e:
if (newTurnAngleMode == 0 && flt > 0.0) {
flt = R2D(asin(1.0/flt));
}
break;
case Angle_e:
break;
case Rad_e:
break;
}
sprintf( cp, " %0.6f", flt );
cp += strlen(cp);
}
sprintf( cp, " %0.6f %0.6f %ld", newTurnRoadbedWidth,
newTurnRoadbedLineWidth, wDrawGetRGB(newTurnRoadbedColor) );
customInfoP = MyStrdup( tempCustom );
strcpy( tempCustom, message );
long options = 0;
if ( curDesign->type == NTO_D_SLIP && newTurnSlipMode == 1) {
options |= COMPOUND_OPTION_PATH_NOCOMBINE;
}
#ifndef MKTURNOUT
if (includeNontrackSegments && customTurnout1) {
CopyNonTracks( customTurnout1 );
}
if ( customTurnout1 ) {
customTurnout1->segCnt = 0;
}
// DIST_T * radii_ends = NULL;
if ((curDesign->type == NTO_CORNU) ||
(curDesign->type == NTO_CORNUWYE) ||
(curDesign->type == NTO_CORNU3WAY)) {
// radii_ends = &radii[0];
}
to = CreateNewTurnout( newTurnScaleName, tempCustom, tempSegs_da.cnt,
&tempSegs(0),
pp->paths, TempEndPtsCount(), TempEndPt(0), FALSE, options );
to->customInfo = customInfoP;
#endif
if (f) {
fprintf( f, "TURNOUT %s \"%s\" %ld\n", newTurnScaleName, PutTitle(tempCustom),
options );
#ifdef MKTURNOUT
if (doCustomInfoLine)
#endif
fprintf( f, "\tU %s\n", customInfoP );
WriteCompoundPathsEndPtsSegs( f, pp->paths, tempSegs_da.cnt, &tempSegs(0),
TempEndPtsCount(), TempEndPt(0) );
}
switch (curDesign->type) {
case NTO_REGULAR:
points[2].y = - points[2].y;
points[3].y = - points[3].y;
points[4].y = - points[4].y;
radii[0] = - radii[0];
LoadSegs( curDesign, FALSE );
pos = GetEndPtPos(TempEndPt(2));
angle = GetEndPtAngle(TempEndPt(2));
pos.y = - pos.y;
angle = 180.0 - angle;
SetEndPt(TempEndPt(2), pos, angle );
BuildTrimedTitle( tempCustom, "\t", newTurnManufacturer, newTurnRightDesc,
newTurnRightPartno );
#ifndef MKTURNOUT
if (includeNontrackSegments && customTurnout2) {
CopyNonTracks( customTurnout2 );
}
if ( customTurnout2 ) {
customTurnout2->segCnt = 0;
}
to = CreateNewTurnout( newTurnScaleName, tempCustom, tempSegs_da.cnt,
&tempSegs(0),
pp->paths, TempEndPtsCount(), TempEndPt(0), FALSE, options );
to->customInfo = customInfoP;
#endif
if (f) {
fprintf( f, "TURNOUT %s \"%s\" %ld\n", newTurnScaleName, PutTitle(tempCustom),
options );
#ifdef MKTURNOUT
if (doCustomInfoLine)
#endif
fprintf( f, "\tU %s\n", customInfoP );
WriteCompoundPathsEndPtsSegs( f, pp->paths, tempSegs_da.cnt, &tempSegs(0),
TempEndPtsCount(), TempEndPt(0) );
}
break;
case NTO_CURVED:
case NTO_CORNU:
points[2].y = - points[2].y;
points[1].y = - points[1].y;
points[3].y = - points[3].y;
points[4].y = - points[4].y;
points[5].y = - points[5].y;
points[6].y = - points[6].y;
radii[0] = -radii[0];
radii[1] = -radii[1];
radii[2] = -radii[2];
radii[3] = -radii[3];
radii[4] = -radii[4];
radii[5] = -radii[5];
radii[6] = -radii[6];
angles[0] = -angles[0];
angles[1] = -angles[1];
angles[2] = -angles[2];
angles[3] = -angles[3];
angles[4] = -angles[4];
angles[5] = -angles[5];
angles[6] = -angles[6];
LoadSegs( curDesign, FALSE );
pos = GetEndPtPos(TempEndPt(1));
angle = GetEndPtAngle(TempEndPt(1));
pos.y = - pos.y;
angle = 180.0 - angle;
SetEndPt( TempEndPt(1), pos, angle );
pos = GetEndPtPos(TempEndPt(2));
angle = GetEndPtAngle(TempEndPt(2));
pos.y = - pos.y;
angle = 180.0 - angle;
SetEndPt( TempEndPt(2), pos, angle );
BuildTrimedTitle( tempCustom, "\t", newTurnManufacturer, newTurnRightDesc,
newTurnRightPartno );
#ifndef MKTURNOUT
if (includeNontrackSegments && customTurnout2) {
CopyNonTracks( customTurnout2 );
}
if ( customTurnout2 ) {
customTurnout2->segCnt = 0;
}
to = CreateNewTurnout( newTurnScaleName, tempCustom, tempSegs_da.cnt,
&tempSegs(0),
pp->paths, TempEndPtsCount(), TempEndPt(0), FALSE, options );
to->customInfo = customInfoP;
#endif
if (f) {
fprintf( f, "TURNOUT %s \"%s\" %ld\n", newTurnScaleName, PutTitle(tempCustom),
options );
#ifdef MKTURNOUT
if (doCustomInfoLine)
#endif
fprintf( f, "\tU %s\n", customInfoP );
WriteCompoundPathsEndPtsSegs( f, pp->paths, tempSegs_da.cnt, &tempSegs(0),
TempEndPtsCount(), TempEndPt(0) );
}
break;
default:
;
}
tempCustom[0] = '\0';
#ifndef MKTURNOUT
if (f) {
fclose(f);
}
SetUserLocale();
includeNontrackSegments = TRUE;
wHide( newTurnW );
DoChangeNotification( CHANGE_PARAMS );
#endif
}
#ifndef MKTURNOUT
static void NewTurnCancel( wWin_p win )
{
wHide( newTurnW );
includeNontrackSegments = TRUE;
}
static wWinPix_t turnDesignWidth;
static wWinPix_t turnDesignHeight;
static void TurnDesignLayout(
paramData_t * pd,
int index,
wWinPix_t colX,
wWinPix_t * w,
wWinPix_t * h )
{
wIndex_t inx;
if ( curDesign == NULL ) {
return;
}
if ( index >= I_TO_FIRST_FLOAT && index <= I_TO_LAST_FLOAT ) {
for ( inx=0; inx<curDesign->floatCnt; inx++ ) {
if ( index == curDesign->floats[inx].index ) {
*w = curDesign->floats[inx].pos.x;
*h = curDesign->floats[inx].pos.y;
return;
}
}
CHECKMSG( FALSE, ( "turnDesignLayout: bad index = %d", index ) );
} else if ( index == I_TOMANUF ) {
*h = turnDesignHeight + 10;
}
}
static void SetupTurnoutDesignerW( toDesignDesc_t * newDesign )
{
static wWinPix_t partnoWidth;
int inx;
wWinPix_t w, h, ctlH;
if ( newTurnW == NULL ) {
partnoWidth = wLabelWidth( "999-99999-9999" );
turnDesignPLs[I_TOLDESC+1].winData =
turnDesignPLs[I_TORDESC+1].winData =
I2VP(partnoWidth);
partnoWidth += wLabelWidth( " # " );
newTurnW = ParamCreateDialog( &turnDesignPG, _("Turnout Designer"), _("Print"),
NewTurnPrint, NewTurnCancel, TRUE, TurnDesignLayout, F_BLOCK, NULL );
for ( inx=0; inx<COUNT( designDescs ); inx++ ) {
designDescs[inx]->lineC = wLineCreate( turnDesignPG.win, NULL,
designDescs[inx]->lineCnt, designDescs[inx]->lines );
wControlShow( (wControl_p)designDescs[inx]->lineC, FALSE );
}
}
if ( curDesign != newDesign ) {
if ( curDesign ) {
wControlShow( (wControl_p)curDesign->lineC, FALSE );
}
curDesign = newDesign;
sprintf( message, _("%s %s Designer"), sProdName, _(curDesign->label) );
wWinSetTitle( newTurnW, message );
for ( inx=I_TO_FIRST_FLOAT; inx<=I_TO_LAST_FLOAT; inx++ ) {
turnDesignPLs[inx].option |= PDO_DLGIGNORE;
wControlShow( turnDesignPLs[inx].control, FALSE );
}
for ( inx=0; inx<curDesign->floatCnt; inx++ ) {
turnDesignPLs[curDesign->floats[inx].index].option &= ~PDO_DLGIGNORE;
wControlSetLabel( turnDesignPLs[curDesign->floats[inx].index].control,
_(curDesign->floats[inx].winLabel) );
wControlShow( turnDesignPLs[curDesign->floats[inx].index].control, TRUE );
}
wControlShow( turnDesignPLs[I_TORDESC+0].control, curDesign->strCnt>1 );
wControlShow( turnDesignPLs[I_TORDESC+1].control, curDesign->strCnt>1 );
wControlShow( (wControl_p)curDesign->lineC, TRUE );
turnDesignWidth = turnDesignHeight = 0;
for (inx=0; inx<curDesign->lineCnt; inx++) {
if (curDesign->lines[inx].x0 > turnDesignWidth) {
turnDesignWidth = curDesign->lines[inx].x0;
}
if (curDesign->lines[inx].x1 > turnDesignWidth) {
turnDesignWidth = curDesign->lines[inx].x1;
}
if (curDesign->lines[inx].y0 > turnDesignHeight) {
turnDesignHeight = curDesign->lines[inx].y0;
}
if (curDesign->lines[inx].y1 > turnDesignHeight) {
turnDesignHeight = curDesign->lines[inx].y1;
}
}
ctlH = wControlGetHeight( turnDesignPLs[I_TO_FIRST_FLOAT].control );
for ( inx=0; inx<curDesign->floatCnt; inx++ ) {
w = curDesign->floats[inx].pos.x + 80;
h = curDesign->floats[inx].pos.y + ctlH;
if (turnDesignWidth < w) {
turnDesignWidth = w;
}
if (turnDesignHeight < h) {
turnDesignHeight = h;
}
}
if ( curDesign->strCnt > 1 ) {
w = wLabelWidth( _("Right Description") );
wControlSetLabel( turnDesignPLs[I_TOLDESC].control, _("Left Description") );
turnDesignPLs[I_TOLDESC].winLabel = N_("Left Description");
turnDesignPLs[I_TORDESC+0].option &= ~PDO_DLGIGNORE;
turnDesignPLs[I_TORDESC+1].option &= ~PDO_DLGIGNORE;
} else {
w = wLabelWidth( _("Manufacturer") );
wControlSetLabel( turnDesignPLs[I_TOLDESC].control, _("Description") );
turnDesignPLs[I_TOLDESC].winLabel = N_("Description");
turnDesignPLs[I_TORDESC+0].option |= PDO_DLGIGNORE;
turnDesignPLs[I_TORDESC+1].option |= PDO_DLGIGNORE;
}
if ( curDesign->angleModeCnt > 0 ) {
turnDesignPLs[I_TOANGMODE].option &= ~PDO_DLGIGNORE;
wControlShow( turnDesignPLs[I_TOANGMODE].control, TRUE );
} else {
turnDesignPLs[I_TOANGMODE].option |= PDO_DLGIGNORE;
wControlShow( turnDesignPLs[I_TOANGMODE].control, FALSE );
}
if (curDesign->type == NTO_D_SLIP) {
turnDesignPLs[I_TOSLIPMODE].option &= ~PDO_DLGIGNORE;
wControlShow( turnDesignPLs[I_TOSLIPMODE].control, TRUE );
} else {
turnDesignPLs[I_TOSLIPMODE].option |= PDO_DLGIGNORE;
wControlShow( turnDesignPLs[I_TOSLIPMODE].control, FALSE );
}
w = turnDesignWidth-w;
wStringSetWidth( (wString_p)turnDesignPLs[I_TOMANUF].control, w );
w -= partnoWidth;
wStringSetWidth( (wString_p)turnDesignPLs[I_TOLDESC].control, w );
wStringSetWidth( (wString_p)turnDesignPLs[I_TORDESC].control, w );
if ( curDesign->type == NTO_CORNU ||
curDesign->type == NTO_CORNUWYE ||
curDesign->type == NTO_CORNU3WAY ) {
turnDesignPLs[I_TOOFFSET+0].winData =
turnDesignPLs[I_TOOFFSET+1].winData =
turnDesignPLs[I_TOOFFSET+2].winData =
turnDesignPLs[I_TOOFFSET+3].winData = &r_10000_10000;
turnDesignPLs[I_TOANGLE+0].winData =
turnDesignPLs[I_TOANGLE+1].winData =
turnDesignPLs[I_TOANGLE+2].winData =
turnDesignPLs[I_TOANGLE+3].winData = &r_90_90;
} else {
turnDesignPLs[I_TOOFFSET+0].winData =
turnDesignPLs[I_TOOFFSET+1].winData =
turnDesignPLs[I_TOOFFSET+2].winData =
turnDesignPLs[I_TOOFFSET+3].winData = &r0d001_10000;
turnDesignPLs[I_TOANGLE+0].winData =
turnDesignPLs[I_TOANGLE+1].winData =
turnDesignPLs[I_TOANGLE+2].winData =
turnDesignPLs[I_TOANGLE+3].winData = &r0d001_90;
}
ParamLayoutDialog( &turnDesignPG );
}
}
static void ShowTurnoutDesigner( void * context )
{
wBool_t sameTurnout = FALSE;
if (recordF) {
fprintf( recordF, TURNOUTDESIGNER " SHOW %s\n",
((toDesignDesc_t*)context)->label );
}
newTurnScaleName = curScaleName;
newTurnTrackGauge = trackGauge;
if (context && (curDesign == context)) {
sameTurnout = TRUE;
}
SetupTurnoutDesignerW( (toDesignDesc_t*)context );
if (!sameTurnout) { /* Clear Values unless same as last time */
newTurnRightDesc[0] = '\0';
newTurnRightPartno[0] = '\0';
newTurnLeftDesc[0] = '\0';
newTurnLeftPartno[0] = '\0';
newTurnOff0 = newTurnLen0 = newTurnAngle0 = newTurnRad0 =
newTurnOff1 = newTurnLen1 = newTurnAngle1 = newTurnRad1 =
newTurnOff2 = newTurnLen2 = newTurnAngle2 = newTurnRad2 =
newTurnOff3 = newTurnLen3 = newTurnAngle3 = newTurnRad3 =
newTurnToeL = newTurnToeR = 0.0;
}
ParamLoadControls( &turnDesignPG );
ParamGroupRecord( &turnDesignPG );
customTurnout1 = NULL;
customTurnout2 = NULL;
wShow( newTurnW );
}
static BOOL_T NotClose( DIST_T d )
{
return d < -0.001 || d > 0.001;
}
EXPORT void EditCustomTurnout( turnoutInfo_t * to, turnoutInfo_t * to1 )
{
int i;
toDesignDesc_t * dp;
char * type, * name, *cp, *mfg, *descL, *partL, *descR, *partR;
long rgb;
trkSeg_p sp0, sp1;
BOOL_T segsDiff;
LWIDTH_T lineWidth;
if ( ! GetArgs( to->customInfo, "qqqqqc", &type, &name, &mfg, &descL, &partL,
&cp ) ) {
return;
}
for ( i=0; i<COUNT( designDescs ); i++ ) {
dp = designDescs[i];
if ( strcmp( type, dp->label ) == 0 ) {
break;
}
}
if ( i >= COUNT( designDescs ) ) {
return;
}
SetupTurnoutDesignerW(dp);
newTurnTrackGauge = GetScaleTrackGauge( to->scaleInx );
newTurnScaleName = GetScaleName( to->scaleInx );
strcpy( newTurnManufacturer, mfg );
strcpy( newTurnLeftDesc, descL );
strcpy( newTurnLeftPartno, partL );
if (dp->type == NTO_REGULAR || dp->type == NTO_CURVED
|| dp->type == NTO_CORNU) {
if ( ! GetArgs( cp, "qqc", &descR, &partR, &cp )) {
return;
}
strcpy( newTurnRightDesc, descR );
strcpy( newTurnRightPartno, partR );
} else {
descR = partR = "";
}
for ( i=0; i<dp->floatCnt; i++ ) {
if ( ! GetArgs( cp, "fc", turnDesignPLs[dp->floats[i].index].valueP, &cp ) ) {
return;
}
switch (dp->floats[i].mode) {
case Dim_e:
/* *dp->floats[i].valueP = PutDim( *dp->floats[i].valueP ); */
break;
case Frog_e:
if (newTurnAngleMode == 0) {
if ( *(FLOAT_T*)(turnDesignPLs[dp->floats[i].index].valueP) > 0.0 ) {
*(FLOAT_T*)(turnDesignPLs[dp->floats[i].index].valueP) = 1.0/sin(D2R(*
(FLOAT_T*)(turnDesignPLs[dp->floats[i].index].valueP)));
}
}
break;
case Angle_e:
break;
case Rad_e:
break;
}
}
rgb = 0;
if ( cp && GetArgs( cp, "ffl", &newTurnRoadbedWidth, &lineWidth, &rgb ) ) {
newTurnRoadbedColor = wDrawFindColor(rgb);
newTurnRoadbedLineWidth = lineWidth;
} else {
newTurnRoadbedWidth = 0;
newTurnRoadbedLineWidth = 0;
newTurnRoadbedColor = wDrawColorBlack;
}
customTurnout1 = to;
customTurnout2 = to1;
segsDiff = FALSE;
if ( to ) {
LoadSegs( dp, TRUE );
segsDiff = FALSE;
if ( to->segCnt == tempSegs_da.cnt ) {
for ( sp0=to->segs,sp1=&tempSegs(0); (!segsDiff)
&& sp0<&to->segs[to->segCnt]; sp0++,sp1++ ) {
switch (sp0->type) {
case SEG_STRLIN:
if (sp0->type != sp1->type ||
sp0->color != sp1->color ||
NotClose(sp0->lineWidth-lineWidth) ||
NotClose(sp0->u.l.pos[0].x-sp1->u.l.pos[0].x) ||
NotClose(sp0->u.l.pos[0].y-sp1->u.l.pos[0].y) ||
NotClose(sp0->u.l.pos[1].x-sp1->u.l.pos[1].x) ||
NotClose(sp0->u.l.pos[1].y-sp1->u.l.pos[1].y) ) {
segsDiff = TRUE;
}
break;
case SEG_CRVLIN:
if (sp0->type != sp1->type ||
sp0->color != sp1->color ||
NotClose(sp0->lineWidth-lineWidth) ||
NotClose(sp0->u.c.center.x-sp1->u.c.center.x) ||
NotClose(sp0->u.c.center.y-sp1->u.c.center.y) ||
NotClose(sp0->u.c.radius-sp1->u.c.radius) ||
NotClose(sp0->u.c.a0-sp1->u.c.a0) ||
NotClose(sp0->u.c.a1-sp1->u.c.a1) ) {
segsDiff = TRUE;
}
break;
case SEG_STRTRK:
case SEG_CRVTRK:
case SEG_BEZTRK:
break;
default:
segsDiff = TRUE;
}
}
} else {
for ( sp0=to->segs; (!segsDiff) && sp0<&to->segs[to->segCnt]; sp0++ ) {
if ( sp0->type != SEG_STRTRK && sp0->type != SEG_CRVTRK
&& sp0->type != SEG_BEZTRK) {
segsDiff = TRUE;
}
}
}
}
if ( (!segsDiff) && to1 && (dp->type==NTO_REGULAR||dp->type==NTO_CURVED
||dp->type == NTO_CORNU) ) {
if ( dp->type==NTO_REGULAR ) {
points[2].y = - points[2].y;
radii[0] = - radii[0];
} else if (dp->type == NTO_CURVED) {
points[1].y = - points[1].y;
points[2].y = - points[2].y;
radii[0] = - radii[0];
radii[1] = - radii[1];
} else {
points[2].y = - points[2].y;
points[1].y = - points[1].y;
angles[1] = -angles[1];
angles[2] = -angles[2];
radii[0] = - radii[0];
radii[1] = - radii[1];
}
LoadSegs( dp, FALSE );
if ( dp->type==NTO_REGULAR ) {
points[2].y = - points[2].y;
radii[0] = - radii[0];
} else if (dp->type == NTO_CURVED) {
points[1].y = - points[1].y;
points[2].y = - points[2].y;
radii[0] = - radii[0];
radii[1] = - radii[1];
} else {
points[2].y = - points[2].y;
points[1].y = - points[1].y;
angles[1] = -angles[1];
angles[2] = -angles[2];
radii[0] = - radii[0];
radii[1] = - radii[1];
}
segsDiff = FALSE;
if ( to1->segCnt == tempSegs_da.cnt ) {
for ( sp0=to1->segs,sp1=&tempSegs(0); (!segsDiff)
&& sp0<&to1->segs[to1->segCnt]; sp0++,sp1++ ) {
switch (sp0->type) {
case SEG_STRLIN:
if (sp0->type != sp1->type ||
sp0->color != sp1->color ||
NotClose(sp0->lineWidth-lineWidth) ||
NotClose(sp0->u.l.pos[0].x-sp1->u.l.pos[0].x) ||
NotClose(sp0->u.l.pos[0].y-sp1->u.l.pos[0].y) ||
NotClose(sp0->u.l.pos[1].x-sp1->u.l.pos[1].x) ||
NotClose(sp0->u.l.pos[1].y-sp1->u.l.pos[1].y) ) {
segsDiff = TRUE;
}
break;
case SEG_CRVLIN:
if (sp0->type != sp1->type ||
sp0->color != sp1->color ||
NotClose(sp0->lineWidth-lineWidth) ||
NotClose(sp0->u.c.center.x-sp1->u.c.center.x) ||
NotClose(sp0->u.c.center.y-sp1->u.c.center.y) ||
NotClose(sp0->u.c.radius-sp1->u.c.radius) ||
NotClose(sp0->u.c.a0-sp1->u.c.a0) ||
NotClose(sp0->u.c.a1-sp1->u.c.a1) ) {
segsDiff = TRUE;
}
break;
case SEG_STRTRK:
case SEG_CRVTRK:
case SEG_BEZTRK:
break;
default:
segsDiff = TRUE;
}
}
} else {
for ( sp0=to1->segs; (!segsDiff) && sp0<&to1->segs[to1->segCnt]; sp0++ ) {
if ( sp0->type != SEG_STRTRK && sp0->type != SEG_CRVTRK
&& sp0->type != SEG_BEZTRK) {
segsDiff = TRUE;
}
}
}
}
includeNontrackSegments = TRUE;
if ( segsDiff ) {
if ( NoticeMessage( MSG_SEGMENTS_DIFFER, _("Yes"), _("No") ) <= 0 ) {
includeNontrackSegments = FALSE;
}
} else {
includeNontrackSegments = FALSE;
}
/*if (recordF)
fprintf( recordF, TURNOUTDESIGNER " SHOW %s\n", dp->label );*/
ParamLoadControls( &turnDesignPG );
ParamGroupRecord( &turnDesignPG );
wShow( newTurnW );
}
EXPORT void InitNewTurn( wMenu_p m )
{
int i;
ParamRegister( &turnDesignPG );
for ( i=0; i<COUNT( designDescs ); i++ ) {
wMenuPushCreate( m, NULL, _(designDescs[i]->label), 0,
ShowTurnoutDesigner, designDescs[i] );
sprintf( message, "%s SHOW %s", TURNOUTDESIGNER, designDescs[i]->label );
AddPlaybackProc( message, (playbackProc_p)ShowTurnoutDesigner, designDescs[i] );
}
newTurnRoadbedColor = wDrawColorBlack;
includeNontrackSegments = TRUE;
log_cornuturnoutdesigner = LogFindIndex( "cornuturnoutdesigner" );
}
#endif
#ifdef MKTURNOUT
char message[STR_HUGE_SIZE];
char * curScaleName;
double trackGauge;
long units = 0;
wDrawColor drawColorBlack;
long newTurnRoadbedColorRGB = 0;
EXPORT const char * AbortMessage(
const char * sFormat,
... )
{
static char sMessage[STR_SIZE];
if ( sFormat == NULL ) {
return "";
}
va_list ap;
va_start(ap, sFormat);
vsnprintf(sMessage, sizeof sMessage, sFormat, ap);
va_end(ap);
return sMessage;
}
EXPORT void AbortProg(
const char * sCond,
const char * sFileName,
int iLineNumber,
const char * sMsg )
{
fprintf( stderr, "%s: %s:%d %s", sCond, sFileName, iLineNumber, sMsg );
abort();
}
void * MyRealloc( void * ptr, size_t size )
{
return realloc( ptr, size );
}
EXPORT char * MyStrdup( const char * str )
{
char * ret;
ret = (char*)malloc( strlen( str ) + 1 );
strcpy( ret, str );
return ret;
}
EXPORT void LogPrintf(
const char * format,
... )
{
}
int NoticeMessage( const char * msg, const char * yes, const char * no, ... )
{
/*fprintf( stderr, "%s\n", msg );*/
return 0;
}
FILE * OpenCustom( char * mode)
{
return stdout;
}
void wPrintSetup( wPrintSetupCallBack_p notused )
{
}
EXPORT void ComputeCurvedSeg(
trkSeg_p s,
DIST_T radius,
coOrd p0,
coOrd p1 )
{
DIST_T d;
ANGLE_T a, aa, aaa;
s->u.c.radius = radius;
d = FindDistance( p0, p1 )/2.0;
a = FindAngle( p0, p1 );
if (radius > 0) {
aa = R2D(asin( d/radius ));
aaa = a + (90.0 - aa);
Translate( &s->u.c.center, p0, aaa, radius );
s->u.c.a0 = NormalizeAngle( aaa + 180.0 );
s->u.c.a1 = aa*2.0;
} else {
aa = R2D(asin( d/(-radius) ));
aaa = a - (90.0 - aa);
Translate( &s->u.c.center, p0, aaa, -radius );
s->u.c.a0 = NormalizeAngle( aaa + 180.0 - aa *2.0 );
s->u.c.a1 = aa*2.0;
}
}
EXPORT char * Strcpytrimed( char * dst, const char * src, BOOL_T double_quotes )
{
const char * cp;
while (*src && isspace((unsigned char)*src) ) { src++; }
if (!*src) {
return dst;
}
cp = src+strlen(src)-1;
while ( cp>src && isspace((unsigned char)*cp) ) { cp--; }
while ( src<=cp ) {
if (*src == '"' && double_quotes) {
*dst++ = '"';
}
*dst++ = *src++;
}
*dst = '\0';
return dst;
}
EXPORT char * PutTitle( char * cp )
{
static char title[STR_SIZE];
char * tp = title;
while (*cp) {
if (*cp == '\"') {
*tp++ = '\"';
*tp++ = '\"';
} else {
*tp++ = *cp;
}
cp++;
}
*tp = '\0';
return title;
}
long wDrawGetRGB(
wDrawColor color )
{
return newTurnRoadbedColorRGB;
}
EXPORT BOOL_T WriteSegs(
FILE * f,
wIndex_t segCnt,
trkSeg_p segs )
{
int i, j;
BOOL_T rc = TRUE;
for ( i=0; i<segCnt; i++ ) {
switch ( segs[i].type ) {
case SEG_STRLIN:
case SEG_STRTRK:
rc &= fprintf( f, "\t%c %ld %0.6f %0.6f %0.6f %0.6f %0.6f\n",
segs[i].type, (segs[i].type==SEG_STRTRK?0:newTurnRoadbedColorRGB),
segs[i].lineWidth,
segs[i].u.l.pos[0].x, segs[i].u.l.pos[0].y,
segs[i].u.l.pos[1].x, segs[i].u.l.pos[1].y )>0;
break;
case SEG_CRVTRK:
case SEG_CRVLIN:
rc &= fprintf( f, "\t%c %ld %0.6f %0.6f %0.6f %0.6f %0.6f %0.6f\n",
segs[i].type, (segs[i].type==SEG_CRVTRK?0:newTurnRoadbedColorRGB),
segs[i].lineWidth,
fabs(segs[i].u.c.radius),
segs[i].u.c.center.x, segs[i].u.c.center.y,
segs[i].u.c.a0, segs[i].u.c.a1 )>0;
break;
case SEG_FILCRCL:
rc &= fprintf( f, "\t%c %ld %0.6f %0.6f %0.6f %0.6f\n",
segs[i].type, newTurnRoadbedColorRGB, segs[i].lineWidth,
fabs(segs[i].u.c.radius),
segs[i].u.c.center.x, segs[i].u.c.center.y )>0;
break;
case SEG_POLY:
case SEG_FILPOLY:
rc &= fprintf( f, "\t%c %ld %0.6f %d\n",
segs[i].type, newTurnRoadbedColorRGB, segs[i].lineWidth,
segs[i].u.p.cnt )>0;
for ( j=0; j<segs[i].u.p.cnt; j++ )
rc &= fprintf( f, "\t\t%0.6f %0.6f\n",
segs[i].u.p.pts[j].pt.x, segs[i].u.p.pts[j].pt.y )>0;
break;
}
}
rc &= fprintf( f, "\t%s\n", END_SEGS )>0;
return rc;
}
BOOL_T WriteCompoundPathsEndPtsSegs(
FILE * f,
PATHPTR_T paths,
wIndex_t segCnt,
trkSeg_p segs,
EPINX_T endPtCnt,
trkEndPt_p endPts )
{
int i;
PATHPTR_T pp;
BOOL_T rc = TRUE;
for ( pp=paths; *pp; pp+=2 ) {
rc &= fprintf( f, "\tP \"%s\"", (char*)pp )>0;
for ( pp+=strlen((char*)pp)+1; pp[0]!=0||pp[1]!=0; pp++ ) {
rc &= fprintf( f, " %d", *pp )>0;
}
rc &= fprintf( f, "\n" )>0;
}
for ( i=0; i<endPtCnt; i++ )
rc &= fprintf( f, "\tE %0.6f %0.6f %0.6f\n",
GetEndPtPos(EndPtIndex(endPts,i)).x,
GetEndPtPos(EndPtIndex(endPts,i)).y,
GetEndPtAngle(EndPtIndex(endPts,i)) )>0;
#ifdef MKTURNOUT
if ( specialLine[0] ) {
rc &= fprintf( f, "%s\n", specialLine );
}
#endif
rc &= WriteSegs( f, segCnt, segs );
return rc;
}
void Usage( int argc, char **argv )
{
int inx;
for (inx=1; inx<argc; inx++) {
fprintf( stderr, "%s ", argv[inx] );
}
fprintf( stderr,
"\nUsage: [-m] [-u] [-r#] [-c#] [-l#]\n"
" <SCL> <MNF> B <DSC> <PNO> <LEN> # Create bumper\n"
" <SCL> <MNF> S <DSC> <PNO> <LEN> # Create straight track\n"
" <SCL> <MNF> J <DSC> <PNO> <LEN1> <LEN2> # Create adjustable track\n"
" <SCL> <MNF> C <DSC> <PNO> <RAD> <ANG> # Create curved track\n"
" <SCL> <MNF> R <LDSC> <LPNO> <RDSC> <RPNO> <LEN2> <ANG> <OFF> <LEN1> # Create Regular Turnout\n"
" <SCL> <MNF> Q <LDSC> <LPNO> <RDSC> <RPNO> <RAD> <ANG> <LEN> # Create Radial Turnout\n"
" <SCL> <MNF> V <LDSC> <LPNO> <RDSC> <RPNO> <LEN1> <ANG1> <OFF1> <LEN2> <ANG2> <OFF2> # Create Curved Turnout\n"
" <SCL> <MNF> W <LDSC> <LPNO> <RDSC> <RPNO> <RAD1> <ANG2> <RAD2> <ANG2> # Create Radial Curved Turnout\n"
" <SCL> <MNF> Y <LDSC> <LPNO> <RDSC> <RPNO> <LENL> <ANGL> <OFFL> <LENR> <ANGR> <OFFR> # Create Wye Turnout\n"
" <SCL> <MNF> 3 <DSC> <PNO> <LEN0> <LENL> <ANGL> <OFFL> <LENR> <ANGR> <OFFR> # Create 3-Way Turnout\n"
" <SCL> <MNF> X <DSC> <PNO> <LEN1> <ANG> <LEN2> # Create Crossing\n"
" <SCL> <MNF> 1 <DSC> <PNO> <LEN1> <ANG> <LEN2> # Create Single Slipswitch\n"
" <SCL> <MNF> 2 <DSC> <PNO> <LEN1> <ANG> <LEN2> # Create Double Slipswitch\n"
" <SCL> <MNF> D <DSC> <PNO> <LEN> <OFF> # Create Double Crossover\n"
" <SCL> <MNF> T <DSC> <PNO> <CNT> <IN-DIAM> <OUT-DIAM> # Create TurnTable\n"
);
exit(1);
}
struct {
char * scale;
double trackGauge;
} scaleMap[] = {
{ "N", 0.3531 },
{ "HO", 0.6486 },
{ "O", 1.1770 },
{ "HOm", 0.472440 },
{ "G", 1.770 }
};
int main ( int argc, char * argv[] )
{
// char * cmd;
double radius, radius2;
int inx, cnt;
double ang, x0, y0, x1, y1;
char **argv0;
int argc0;
argc0 = argc;
argv0 = argv;
doCustomInfoLine = FALSE;
argv++;
if (argc < 7) {
Usage(argc0,argv0);
}
while ( argv[0][0] == '-' ) {
switch (argv[0][1]) {
case 'm':
units = UNITS_METRIC;
break;
case 'u':
doCustomInfoLine = TRUE;
break;
case 'r':
doRoadBed = TRUE;
if (argv[0][2] == '\0') {
Usage(argc0,argv0);
}
newTurnRoadbedWidth = atof(&argv[0][2]);
newTurnRoadbedColorRGB = 0;
newTurnRoadbedColor = 0;
newTurnRoadbedLineWidth = 0;
break;
case 'c':
newTurnRoadbedColorRGB = atol(&argv[0][2]);
break;
case 'l':
newTurnRoadbedLineWidth = atol(&argv[0][2]);
break;
default:
fprintf( stderr, "Unknown option: %s\n", argv[0] );
}
argv++;
argc--;
}
newTurnScaleName = curScaleName = *argv++;
trackGauge = 0.0;
for ( inx=0; inx<COUNT( scaleMap ); inx++ ) {
if (strcmp( curScaleName, scaleMap[inx].scale ) == 0 ) {
newTurnTrackGauge = trackGauge = scaleMap[inx].trackGauge;
break;
}
}
if (trackGauge == 0.0) {
fprintf( stderr, "Unknown scale: %s\n", curScaleName );
exit(1);
}
strcpy( newTurnManufacturer, *argv++ );
specialLine[0] = '\0';
switch (tolower((unsigned char)(*argv++)[0])) {
case 'b':
if (argc != 7) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
curDesign = &StrSectionDesc;
NewTurnOk( &StrSectionDesc );
break;
case 's':
if (argc != 7) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
curDesign = &StrSectionDesc;
NewTurnOk( &StrSectionDesc );
break;
case 'j':
if (argc != 8) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnLen1 = GetDim(atof( *argv++ ));
sprintf( specialLine, "\tX adjustable %0.6f %0.6f", newTurnLen0, newTurnLen1 );
curDesign = &StrSectionDesc;
NewTurnOk( &StrSectionDesc );
break;
case 'c':
if (argc != 8) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
curDesign = &CrvSectionDesc;
NewTurnOk( &CrvSectionDesc );
break;
case 'r':
if (argc != 12) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
strcpy( newTurnRightDesc, *argv++ );
strcpy( newTurnRightPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnOff0 = GetDim(atof( *argv++ ));
newTurnLen1 = GetDim(atof( *argv++ ));
curDesign = &RegDesc;
NewTurnOk( &RegDesc );
break;
case 'q':
if (argc != 11) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
strcpy( newTurnRightDesc, *argv++ );
strcpy( newTurnRightPartno, *argv++ );
radius = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnLen1 = radius * sin(D2R(newTurnAngle0));
newTurnOff1 = radius * (1-cos(D2R(newTurnAngle1)));
curDesign = &RegDesc;
NewTurnOk( &RegDesc );
break;
case 'v':
if (argc != 14) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
strcpy( newTurnRightDesc, *argv++ );
strcpy( newTurnRightPartno, *argv++ );
newTurnLen1 = GetDim(atof( *argv++ ));
newTurnAngle1 = atof( *argv++ );
newTurnOff1 = GetDim(atof( *argv++ ));
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnOff0 = GetDim(atof( *argv++ ));
curDesign = &CrvDesc;
NewTurnOk( &CrvDesc );
break;
case 'w':
if (argc != 12) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
strcpy( newTurnRightDesc, *argv++ );
strcpy( newTurnRightPartno, *argv++ );
radius = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnLen0 = radius * sin(D2R(newTurnAngle0));
newTurnOff0 = radius * (1-cos(D2R(newTurnAngle0)));
radius = GetDim(atof( *argv++ ));
newTurnAngle1 = atof( *argv++ );
newTurnLen1 = radius * sin(D2R(newTurnAngle1));
newTurnOff1 = radius * (1-cos(D2R(newTurnAngle1)));
curDesign = &CrvDesc;
NewTurnOk( &CrvDesc );
break;
case 'y':
if (argc != 14) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
strcpy( newTurnRightDesc, *argv++ );
strcpy( newTurnRightPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnOff0 = GetDim(atof( *argv++ ));
newTurnLen1 = GetDim(atof( *argv++ ));
newTurnAngle1 = atof( *argv++ );
newTurnOff1 = GetDim(atof( *argv++ ));
curDesign = &WyeDesc;
NewTurnOk( &WyeDesc );
break;
case '3':
if (argc != 13) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen2 = GetDim(atof( *argv++ ));
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnOff0 = GetDim(atof( *argv++ ));
newTurnLen1 = GetDim(atof( *argv++ ));
newTurnAngle1 = atof( *argv++ );
newTurnOff1 = GetDim(atof( *argv++ ));
curDesign = &ThreewayDesc;
NewTurnOk( &ThreewayDesc );
break;
case 'x':
if (argc<9) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnLen1 = GetDim(atof( *argv++ ));
curDesign = &CrossingDesc;
NewTurnOk( &CrossingDesc );
break;
case '1':
if (argc<9) { Usage(argc0,argv0); }
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnLen1 = GetDim(atof( *argv++ ));
curDesign = &SingleSlipDesc;
NewTurnOk( &SingleSlipDesc );
break;
case '2':
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
if (argc<9) { Usage(argc0,argv0); }
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnAngle0 = atof( *argv++ );
newTurnLen1 = GetDim(atof( *argv++ ));
curDesign = &DoubleSlipDesc;
NewTurnOk( &DoubleSlipDesc );
break;
case 'd':
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
if (argc<8) { Usage(argc0,argv0); }
newTurnLen0 = GetDim(atof( *argv++ ));
newTurnOff0 = GetDim(atof( *argv++ ));
curDesign = &DoubleCrossoverDesc;
NewTurnOk( &DoubleCrossoverDesc );
break;
case 't':
strcpy( newTurnLeftDesc, *argv++ );
strcpy( newTurnLeftPartno, *argv++ );
if (argc<9) { Usage(argc0,argv0); }
cnt = atoi( *argv++ )/2;
radius = GetDim(atof( *argv++ ))/2.0;
radius2 = GetDim(atof( *argv++ ))/2.0;
BuildTrimedTitle( message, "\t", newTurnManufacturer, newTurnLeftDesc,
newTurnLeftPartno );
fprintf( stdout, "TURNOUT %s \"%s\"\n", curScaleName, PutTitle(message) );
for (inx=0; inx<cnt; inx++) {
fprintf( stdout, "\tP \"%d\" %d %d %d\n", inx+1, inx*3+1, inx*3+2, inx*3+3 );
}
for (inx=0; inx<cnt; inx++) {
fprintf( stdout, "\tP \"%d\" %d %d %d\n", inx+1+cnt, -(inx*3+3), -(inx*3+2),
-(inx*3+1) );
}
for (inx=0; inx<cnt; inx++) {
ang = inx*180.0/cnt;
x0 = radius2 * sin(D2R(ang));
y0 = radius2 * cos(D2R(ang));
fprintf( stdout, "\tE %0.6f %0.6f %0.6f\n", x0, y0, ang );
fprintf( stdout, "\tE %0.6f %0.6f %0.6f\n", -x0, -y0, ang+180.0 );
}
for (inx=0; inx<cnt; inx++) {
ang = inx*180.0/cnt;
x0 = radius2 * sin(D2R(ang));
y0 = radius2 * cos(D2R(ang));
x1 = radius * sin(D2R(ang));
y1 = radius * cos(D2R(ang));
fprintf( stdout, "\tS 0 0 %0.6f %0.6f %0.6f %0.6f\n", x0, y0, x1, y1 );
fprintf( stdout, "\tS 0 0 %0.6f %0.6f %0.6f %0.6f\n", x1, y1, -x1, -y1 );
fprintf( stdout, "\tS 0 0 %0.6f %0.6f %0.6f %0.6f\n", -x1, -y1, -x0, -y0 );
}
fprintf( stdout, "\tA 16711680 0 %0.6f 0.000000 0.000000 0.000000 360.000000\n",
radius2 );
fprintf( stdout, "\tA 16711680 0 %0.6f 0.000000 0.000000 0.000000 360.000000\n",
radius );
fprintf( stdout, "\t%s\n", END_SEGS );
break;
default:
fprintf( stderr, "Invalid command: %s\n", argv[-1] );
exit(1);
}
exit(0);
}
#endif