# Russian translation for xtrkcad package # Copyright (C) CupIvan # This file is distributed under the same license as the xtrkcad package. # CupIvan , 2015-2018 # msgid "" msgstr "" "Project-Id-Version: xtrkcad 5.1.2\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-12-27 10:09+0100\n" "PO-Revision-Date: 2019-04-04 10:37+0300\n" "Last-Translator: CupIvan \n" "Language-Team: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: ru_RU\n" "X-Generator: Poedit 2.2.1\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%" "10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" #: ../bin/archive.c:154 ../bin/archive.c:161 ../bin/archive.c:190 #: ../bin/archive.c:215 ../bin/archive.c:270 ../bin/archive.c:284 #: ../bin/archive.c:294 ../bin/archive.c:348 ../bin/archive.c:384 #: ../bin/archive.c:400 ../bin/archive.c:410 ../bin/archive.c:433 #: ../bin/cblock.c:505 ../bin/cswitchmotor.c:500 ../bin/dbench.c:147 #: ../bin/dbitmap.c:427 ../bin/dcar.c:4894 ../bin/dcar.c:5093 #: ../bin/dcar.c:5103 ../bin/dcar.c:5150 ../bin/dcar.c:5158 ../bin/dcar.c:5176 #: ../bin/dcar.c:5191 ../bin/dcar.c:5196 ../bin/dcar.c:5225 ../bin/dcar.c:5395 #: ../bin/directory.c:44 ../bin/directory.c:79 ../bin/directory.c:86 #: ../bin/directory.c:117 ../bin/directory.c:133 ../bin/dxfoutput.c:205 #: ../bin/fileio.c:224 ../bin/fileio.c:677 ../bin/fileio.c:835 #: ../bin/fileio.c:897 ../bin/fileio.c:1022 ../bin/fileio.c:1091 #: ../bin/fileio.c:1097 ../bin/fileio.c:1189 ../bin/fileio.c:1202 #: ../bin/fileio.c:1631 ../bin/fileio.c:1680 ../bin/fileio.c:1733 #: ../bin/macro.c:166 ../bin/macro.c:855 ../bin/macro.c:1010 #: ../bin/macro.c:1029 ../bin/macro.c:1329 ../bin/param.c:2402 #: ../bin/paramfile.c:258 ../bin/paramfilelist.c:458 ../bin/track.c:1104 #: ../bin/track.c:1344 ../bin/track.c:1366 ../bin/track.c:1785 #: ../bin/track.c:1990 ../bin/track.c:2000 ../bin/track.c:2005 #: ../bin/track.c:2020 ../bin/track.c:2047 ../bin/track.c:2105 msgid "Continue" msgstr "Продолжить" #: ../bin/cbezier.c:631 msgid "Select End-Point - Ctrl unlocks end-point" msgstr "Выбрать конечную точку - Ctrl разблокирует её" #: ../bin/cbezier.c:633 msgid "Select End-Point" msgstr "Выбрать конечную точку" #: ../bin/cbezier.c:666 msgid "Not close enough to any valid, selectable point, reselect" msgstr "" #: ../bin/cbezier.c:672 #, c-format msgid "Drag point %d to new location and release it" msgstr "" #: ../bin/cbezier.c:682 ../bin/cbezier.c:785 ../bin/cbezier.c:788 msgid "Pick any circle to adjust it - Enter to confirm, ESC to abort" msgstr "" #: ../bin/cbezier.c:707 msgid "Bezier Curve Invalid has identical end points Change End Point" msgstr "" #: ../bin/cbezier.c:711 #, c-format msgid "Bezier Curve Invalid has %s Change End Point" msgstr "" #: ../bin/cbezier.c:715 msgid "Bezier Curve Invalid has three co-incident points" msgstr "" #: ../bin/cbezier.c:718 msgid "Bezier is Straight Line" msgstr "Безье к прямой линии" #: ../bin/cbezier.c:721 #, c-format msgid "Bezier %s : Min Radius=%s Length=%s fx=%0.3f fy=%0.3f cusp=%0.3f" msgstr "Безье %s : Мин. радиус=%s Длина=%s fx=%0.3f fy=%0.3f выступ=%0.3f" #: ../bin/cbezier.c:726 #, c-format msgid "Bezier %s : Min Radius=%s Length=%s" msgstr "Безье %s : Мин. радиус=%s Длина=%s" #: ../bin/cbezier.c:752 msgid "No unconnected End Point to lock to" msgstr "" #: ../bin/cbezier.c:772 msgid "Bezier curve invalid has identical end points Change End Point" msgstr "" #: ../bin/cbezier.c:776 #, c-format msgid "Bezier curve invalid has %s Change End Point" msgstr "" #: ../bin/cbezier.c:780 msgid "Bezier curve invalid has three co-incident points" msgstr "" #: ../bin/cbezier.c:783 msgid "Bezier curve is straight line" msgstr "Кривая Безье - это прямая линия" #: ../bin/cbezier.c:799 ../bin/cbezier.c:813 msgid "Invalid Bezier Track - end points are identical" msgstr "" #: ../bin/cbezier.c:806 #, c-format msgid "Invalid Bezier Curve has a %s - Adjust" msgstr "" #: ../bin/cbezier.c:810 msgid "Invalid Bezier Curve has three coincident points - Adjust" msgstr "" #: ../bin/cbezier.c:818 msgid "Create Bezier" msgstr "Создать Безье" #: ../bin/cbezier.c:900 #, c-format msgid "%s picked - now select a Point" msgstr "%s собрано - теперь выберите Точку" #: ../bin/cbezier.c:939 ../bin/ccornu.c:2085 msgid "No changes made" msgstr "" #: ../bin/cbezier.c:943 msgid "Modify Bezier" msgstr "Изменить Безье" #: ../bin/cbezier.c:957 #, fuzzy msgid "Modify Bezier Complete" msgstr "Изменение Безье отменено" #: ../bin/cbezier.c:961 msgid "Modify Bezier Cancelled" msgstr "Изменение Безье отменено" #: ../bin/cbezier.c:1089 ../bin/cbezier.c:1189 #, c-format msgid "Place 1st endpoint of Bezier - snap to %s" msgstr "" #: ../bin/cbezier.c:1109 ../bin/ccornu.c:2444 ../bin/ccurve.c:205 #: ../bin/cstraigh.c:92 msgid "Track is different gauge" msgstr "" #: ../bin/cbezier.c:1131 msgid "Drag end of first control arm" msgstr "" #: ../bin/cbezier.c:1139 msgid "Drag end of second control arm" msgstr "" #: ../bin/cbezier.c:1194 ../bin/cbezier.c:1236 #, c-format msgid "Select other end of Bezier - snap to %s end" msgstr "" #: ../bin/cbezier.c:1231 msgid "Control Arm 1 is too short, try again" msgstr "" #: ../bin/cblock.c:110 ../bin/cblock.c:122 ../bin/cblock.c:169 #: ../bin/ccontrol.c:168 ../bin/ccontrol.c:425 ../bin/compound.c:745 #: ../bin/csensor.c:160 ../bin/csensor.c:389 ../bin/csignal.c:236 #: ../bin/csignal.c:499 ../bin/csignal.c:510 ../bin/csignal.c:536 #: ../bin/cswitchmotor.c:89 ../bin/cswitchmotor.c:108 #: ../bin/cswitchmotor.c:228 ../bin/dcontmgm.c:79 ../bin/dlayer.c:543 msgid "Name" msgstr "Название" #: ../bin/cblock.c:111 ../bin/cblock.c:123 ../bin/cblock.c:170 #: ../bin/csensor.c:162 ../bin/csensor.c:395 ../bin/csignal.c:499 #: ../bin/csignal.c:538 msgid "Script" msgstr "Скрипт" #: ../bin/cblock.c:124 msgid "Segments" msgstr "Сегменты" #: ../bin/cblock.c:171 ../bin/cdraw.c:560 ../bin/cdraw.c:1573 #: ../bin/cdraw.c:1720 ../bin/cdraw.c:2843 ../bin/cdraw.c:3070 #: ../bin/cdraw.c:3109 ../bin/ctodesgn.c:177 ../bin/ctodesgn.c:178 #: ../bin/ctodesgn.c:179 ../bin/ctodesgn.c:180 ../bin/ctodesgn.c:192 #: ../bin/ctodesgn.c:193 ../bin/ctodesgn.c:242 ../bin/ctodesgn.c:245 #: ../bin/ctodesgn.c:268 ../bin/ctodesgn.c:273 ../bin/ctodesgn.c:314 #: ../bin/ctodesgn.c:321 ../bin/ctodesgn.c:323 ../bin/ctodesgn.c:348 #: ../bin/ctodesgn.c:353 ../bin/ctodesgn.c:393 ../bin/ctodesgn.c:400 #: ../bin/ctodesgn.c:401 ../bin/ctodesgn.c:426 ../bin/ctodesgn.c:429 #: ../bin/ctodesgn.c:432 ../bin/ctodesgn.c:475 ../bin/ctodesgn.c:479 #: ../bin/ctodesgn.c:486 ../bin/ctodesgn.c:487 ../bin/ctodesgn.c:488 #: ../bin/ctodesgn.c:514 ../bin/ctodesgn.c:516 ../bin/ctodesgn.c:538 #: ../bin/ctodesgn.c:540 ../bin/ctodesgn.c:563 ../bin/ctodesgn.c:565 #: ../bin/ctodesgn.c:599 ../bin/ctodesgn.c:625 ../bin/ctodesgn.c:650 #: ../bin/ctodesgn.c:674 ../bin/ctodesgn.c:720 ../bin/ctodesgn.c:743 #: ../bin/ctodesgn.c:744 ../bin/ctrain.c:182 ../bin/tbezier.c:296 #: ../bin/tcornu.c:332 ../bin/tcurve.c:404 ../bin/tstraigh.c:91 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:186 msgid "Length" msgstr "Длина" #: ../bin/cblock.c:172 ../bin/cdraw.c:551 ../bin/compound.c:720 #: ../bin/tbezier.c:283 ../bin/tcornu.c:319 ../bin/tcurve.c:396 #: ../bin/tease.c:524 ../bin/tstraigh.c:87 msgid "End Pt 1: X,Y" msgstr "Конец 1: X,Y" #: ../bin/cblock.c:173 ../bin/cdraw.c:552 ../bin/compound.c:725 #: ../bin/tbezier.c:290 ../bin/tcornu.c:324 ../bin/tcurve.c:398 #: ../bin/tease.c:526 ../bin/tstraigh.c:89 msgid "End Pt 2: X,Y" msgstr "Конец 2: X,Y" #: ../bin/cblock.c:198 ../bin/cblock.c:210 ../bin/cblock.c:592 #: ../bin/cblock.c:613 ../bin/cblock.c:621 ../bin/cblock.c:693 #: ../bin/cblock.c:814 ../bin/cblock.c:826 ../bin/cblock.c:864 #: ../bin/ccontrol.c:203 ../bin/ccontrol.c:216 ../bin/ccontrol.c:228 #: ../bin/ccontrol.c:489 ../bin/cdraw.c:125 ../bin/cdraw.c:2903 #: ../bin/cgroup.c:1156 ../bin/cgroup.c:1260 ../bin/cgroup.c:1267 #: ../bin/cgroup.c:1320 ../bin/cgroup.c:1343 ../bin/cgroup.c:1437 #: ../bin/cgroup.c:1642 ../bin/cgroup.c:1867 ../bin/cnote.c:67 #: ../bin/compound.c:785 ../bin/compound.c:801 ../bin/compound.c:835 #: ../bin/cprint.c:746 ../bin/cprint.c:1312 ../bin/cprint.c:1445 #: ../bin/cpull.c:531 ../bin/cpull.c:546 ../bin/cpull.c:548 ../bin/cpull.c:550 #: ../bin/cpull.c:721 ../bin/cselect.c:2029 ../bin/csensor.c:192 #: ../bin/csensor.c:204 ../bin/csensor.c:446 ../bin/csnap.c:591 #: ../bin/csnap.c:733 ../bin/csignal.c:266 ../bin/csignal.c:678 #: ../bin/csignal.c:748 ../bin/cstruct.c:1041 ../bin/cstruct.c:1180 #: ../bin/cswitchmotor.c:257 ../bin/cswitchmotor.c:269 #: ../bin/cswitchmotor.c:281 ../bin/cswitchmotor.c:293 #: ../bin/cswitchmotor.c:570 ../bin/cswitchmotor.c:608 #: ../bin/cswitchmotor.c:746 ../bin/cswitchmotor.c:777 ../bin/ctext.c:172 #: ../bin/ctodesgn.c:211 ../bin/ctodesgn.c:1309 ../bin/ctodesgn.c:2138 #: ../bin/ctodesgn.c:2255 ../bin/ctodesgn.c:2578 ../bin/ctrain.c:205 #: ../bin/cturnout.c:2973 ../bin/cturnout.c:3123 ../bin/cundo.c:260 #: ../bin/cundo.c:266 ../bin/dbitmap.c:157 ../bin/dbitmap.c:232 #: ../bin/dbitmap.c:473 ../bin/dcar.c:4125 ../bin/dcar.c:4297 #: ../bin/dcar.c:4302 ../bin/dcar.c:4306 ../bin/dcar.c:4312 ../bin/dcar.c:4662 #: ../bin/dcar.c:4778 ../bin/dcar.c:5215 ../bin/dcmpnd.c:419 #: ../bin/dcmpnd.c:435 ../bin/dcmpnd.c:582 ../bin/dcustmgm.c:219 #: ../bin/dcustmgm.c:226 ../bin/dcustmgm.c:236 ../bin/dcustmgm.c:261 #: ../bin/dease.c:251 ../bin/dlayer.c:336 ../bin/dlayer.c:373 #: ../bin/dlayer.c:842 ../bin/dlayer.c:1392 ../bin/dlayer.c:1398 #: ../bin/dlayer.c:1404 ../bin/doption.c:202 ../bin/doption.c:287 #: ../bin/doption.c:497 ../bin/doption.c:500 ../bin/doption.c:504 #: ../bin/doption.c:516 ../bin/doption.c:591 ../bin/dprmfile.c:431 #: ../bin/draw.c:2986 ../bin/fileio.c:180 ../bin/fileio.c:595 #: ../bin/fileio.c:727 ../bin/fileio.c:730 ../bin/fileio.c:736 #: ../bin/fileio.c:806 ../bin/fileio.c:1044 ../bin/layout.c:553 #: ../bin/layout.c:819 ../bin/layout.c:994 ../bin/macro.c:1133 #: ../bin/macro.c:1138 ../bin/macro.c:1216 ../bin/macro.c:1294 #: ../bin/macro.c:1542 ../bin/macro.c:1563 ../bin/menu.c:272 ../bin/menu.c:283 #: ../bin/menu.c:294 ../bin/menu.c:459 ../bin/menu.c:497 ../bin/menu.c:607 #: ../bin/misc.c:491 ../bin/misc.c:1054 ../bin/misc.c:1063 ../bin/misc.c:1083 #: ../bin/misc.c:1089 ../bin/misc.c:1274 ../bin/param.c:787 #: ../bin/param.c:2132 ../bin/param.c:2274 ../bin/param.c:2278 #: ../bin/param.c:2410 ../bin/param.c:2418 ../bin/paramfile.c:336 #: ../bin/paramfile.c:339 ../bin/paramfile.c:345 ../bin/paramfile.c:371 #: ../bin/paramfile.c:400 ../bin/paramfile.c:406 ../bin/paramfilelist.c:131 #: ../bin/paramfilelist.c:183 ../bin/paramfilelist.c:236 ../bin/scale.c:305 #: ../bin/scale.c:948 ../bin/scale.c:1084 ../bin/tease.c:1167 #: ../bin/track.c:1801 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:677 msgid "Ok" msgstr "ОК" #: ../bin/cblock.c:215 msgid "Change block" msgstr "Изменить блок" #: ../bin/cblock.c:269 ../bin/cswitchmotor.c:352 #, fuzzy, c-format msgid "(%d): Layer=%u %s" msgstr "(%d): Слой=%d %s" #: ../bin/cblock.c:293 ../bin/cblock.c:1027 msgid "Block" msgstr "Блок" #: ../bin/cblock.c:504 #, c-format msgid "resolveBlockTrack: T%d[%d]: T%d doesn't exist" msgstr "" #: ../bin/cblock.c:592 ../bin/cblock.c:826 msgid "Block must have a name!" msgstr "Блок должен быть назван!" #: ../bin/cblock.c:621 msgid "Block is discontiguous!" msgstr "" #: ../bin/cblock.c:626 msgid "Create block" msgstr "Создать блок" #: ../bin/cblock.c:674 msgid "Non track object skipped!" msgstr "" #: ../bin/cblock.c:678 msgid "Selected track is already in a block, skipped!" msgstr "" #: ../bin/cblock.c:692 msgid "Create Block" msgstr "Создать блок" #: ../bin/cblock.c:722 ../bin/cblock.c:754 msgid "Select a track" msgstr "Выберите трек" #: ../bin/cblock.c:731 ../bin/cblock.c:762 msgid "Not a block!" msgstr "Это не блок!" #: ../bin/cblock.c:767 #, c-format msgid "Really delete block %s?" msgstr "Действительно удалить блок %s?" #: ../bin/cblock.c:767 ../bin/ccornu.c:2952 ../bin/ccornu.c:3176 #: ../bin/cdraw.c:130 ../bin/cgroup.c:1162 ../bin/command.c:390 #: ../bin/command.c:397 ../bin/command.c:458 ../bin/cpull.c:673 #: ../bin/csignal.c:725 ../bin/cswitchmotor.c:700 ../bin/ctodesgn.c:2891 #: ../bin/ctodesgn.c:3505 ../bin/ctrain.c:2606 ../bin/dcar.c:4245 #: ../bin/dcar.c:4343 ../bin/dcar.c:4433 ../bin/dcar.c:4459 ../bin/dcar.c:4843 #: ../bin/dcar.c:5284 ../bin/dcustmgm.c:162 ../bin/dcontmgm.c:167 #: ../bin/track.c:1803 ../bin/track.c:1905 ../bin/track.c:1923 msgid "Yes" msgstr "Да" #: ../bin/cblock.c:767 ../bin/ccornu.c:2953 ../bin/ccornu.c:3177 #: ../bin/cdraw.c:130 ../bin/cgroup.c:1162 ../bin/command.c:390 #: ../bin/command.c:397 ../bin/command.c:458 ../bin/cpull.c:674 #: ../bin/csignal.c:725 ../bin/cswitchmotor.c:700 ../bin/ctodesgn.c:2891 #: ../bin/ctodesgn.c:3505 ../bin/ctrain.c:2606 ../bin/dcar.c:4245 #: ../bin/dcar.c:4343 ../bin/dcar.c:4433 ../bin/dcar.c:4459 ../bin/dcar.c:4843 #: ../bin/dcar.c:5284 ../bin/dcustmgm.c:162 ../bin/dcontmgm.c:168 #: ../bin/track.c:1803 ../bin/track.c:1905 ../bin/track.c:1923 msgid "No" msgstr "Нет" #: ../bin/cblock.c:769 msgid "Delete Block" msgstr "Удалить блок" #: ../bin/cblock.c:814 #, c-format msgid "Deleting block %s" msgstr "Удаление блока %s" #: ../bin/cblock.c:830 msgid "Modify Block" msgstr "Изменить блок" #: ../bin/cblock.c:863 msgid "Edit block" msgstr "Редактировать блок" #: ../bin/cblock.c:869 #, c-format msgid "Edit block %d" msgstr "Редактировать блок %d" #: ../bin/ccornu.c:193 ../bin/ccornu.c:196 ../bin/ccornu.c:199 #: ../bin/ccornu.c:253 #, fuzzy, c-format msgid "%s FlexTrack" msgstr "Изогнутый трек" #: ../bin/ccornu.c:247 msgid " FLEX " msgstr "" #: ../bin/ccornu.c:964 ../bin/cjoin.c:1063 ../bin/cmisc.c:55 msgid "First" msgstr "Начало" #: ../bin/ccornu.c:971 ../bin/cjoin.c:1071 msgid "Second" msgstr "Конец" #: ../bin/ccornu.c:1047 ../bin/ccornu.c:2141 ../bin/ccornu.c:2172 #: ../bin/tcornu.c:877 ../bin/tcornu.c:1387 #, c-format msgid "" "Cornu Create Failed for p1[%0.3f,%0.3f] p2[%0.3f,%0.3f], c1[%0.3f,%0.3f] c2[%" "0.3f,%0.3f], a1=%0.3f a2=%0.3f, r1=%s r2=%s" msgstr "" #: ../bin/ccornu.c:1084 ../bin/ccornu.c:1757 ../bin/ccornu.c:1778 #: ../bin/tbezier.c:284 ../bin/tbezier.c:291 ../bin/tcornu.c:320 #: ../bin/tcornu.c:325 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:178 msgid "End Angle" msgstr "Конечный угол" #: ../bin/ccornu.c:1087 ../bin/ccornu.c:1756 ../bin/ccornu.c:1777 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:179 #, fuzzy msgid "End Radius" msgstr "Радиус" #: ../bin/ccornu.c:1142 #, fuzzy msgid "Select Point, or Add Point" msgstr "Выбрать конечную точку" #: ../bin/ccornu.c:1330 msgid "Not close enough to track or point, reselect" msgstr "" #: ../bin/ccornu.c:1336 #, fuzzy msgid "Drag out end of Cornu" msgstr "Тащите к другому концу хорды" #: ../bin/ccornu.c:1338 #, fuzzy msgid "Drag along end of track" msgstr "Тащите по касательной к первому концу" #: ../bin/ccornu.c:1340 #, fuzzy msgid "Drag to move" msgstr "Тащите, чтобы повернуть" #: ../bin/ccornu.c:1344 msgid "Drag point to new location, Delete to remove" msgstr "" #: ../bin/ccornu.c:1348 #, fuzzy msgid "Drag to change end radius" msgstr "Тащите, чтобы установить радиус" #: ../bin/ccornu.c:1351 #, fuzzy msgid "Drag to change end angle" msgstr "Тяни, чтобы изменить высоту" #: ../bin/ccornu.c:1368 msgid "Pick any circle to adjust or add - Enter to accept, Esc to cancel" msgstr "" #: ../bin/ccornu.c:1380 msgid "Track can't be split" msgstr "" #: ../bin/ccornu.c:1450 msgid "Too close to other end of selected Track" msgstr "" #: ../bin/ccornu.c:1460 msgid "Can't move end inside a turnout" msgstr "" #: ../bin/ccornu.c:1609 msgid "Can't extend connected Bezier or Cornu" msgstr "" #: ../bin/ccornu.c:1690 #, c-format msgid "" "Cornu : Min Radius=%s MaxRateofCurveChange/Scale=%s Length=%s Winding Arc=%s" msgstr "" #: ../bin/ccornu.c:1714 ../bin/ccornu.c:2423 msgid "Helix Already Connected" msgstr "" #: ../bin/ccornu.c:1730 msgid "No Valid end point on that track" msgstr "" #: ../bin/ccornu.c:1735 msgid "Track is different scale" msgstr "" #: ../bin/ccornu.c:1794 msgid "" "Pick on point to adjust it along track - Delete to remove, Enter to confirm, " "ESC to abort" msgstr "" #: ../bin/ccornu.c:1825 msgid "Cornu has too complex shape - adjust end pts" msgstr "" #: ../bin/ccornu.c:1838 #, c-format msgid "Cornu point %d too close to other end of connect track - reposition it" msgstr "" #: ../bin/ccornu.c:1844 msgid "Create Cornu" msgstr "" #: ../bin/ccornu.c:2037 msgid "Now Select or Add (+Shift) a Point" msgstr "" #: ../bin/ccornu.c:2100 #, c-format msgid "Cornu end %d too close to other end of connect track - reposition it" msgstr "" #: ../bin/ccornu.c:2105 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:177 msgid "Modify Cornu" msgstr "" #: ../bin/ccornu.c:2122 #, c-format msgid "Cornu Extension Create Failed for end %d" msgstr "" #: ../bin/ccornu.c:2219 #, c-format msgid "Connected Track End Adjust for end %d failed" msgstr "" #: ../bin/ccornu.c:2230 msgid "Modify Cornu Cancelled" msgstr "" #: ../bin/ccornu.c:2396 #, fuzzy msgid "Left click - Start Cornu track" msgstr "Левый клик - соединить с треком" #: ../bin/ccornu.c:2398 #, fuzzy msgid "Left click - Place Flextrack" msgstr "Левый клик - соединить с треком" #: ../bin/ccornu.c:2401 msgid "Left click - join with Cornu track" msgstr "" #: ../bin/ccornu.c:2404 msgid "Left click - join with Cornu track, Shift Left click - move to join" msgstr "" #: ../bin/ccornu.c:2439 msgid "No valid open endpoint on that track" msgstr "" #: ../bin/ccornu.c:2469 ../bin/ccornu.c:2482 #, fuzzy msgid "Drag arm in the direction of track" msgstr "Тащите из конечной точки по направлению к кривой" #: ../bin/ccornu.c:2487 msgid "No Unconnected Track End there" msgstr "" #: ../bin/ccornu.c:2498 ../bin/ccornu.c:2523 msgid "No Valid Track End there" msgstr "" #: ../bin/ccornu.c:2511 msgid "Locked - Move 1st end point of Cornu track along track 1" msgstr "" #: ../bin/ccornu.c:2535 msgid "Locked - Move 2nd end point of Cornu track along track 2" msgstr "" #: ../bin/ccornu.c:2623 msgid "Track can't be split - so locked to endpoint" msgstr "" #: ../bin/ccornu.c:2628 msgid "Point not on track 1" msgstr "" #: ../bin/ccornu.c:2670 #, fuzzy msgid "Pick other end of Cornu" msgstr "Тащите к другому концу хорды" #: ../bin/ccornu.c:2673 msgid "" "Select flextrack ends or anchors and drag, Enter to approve, Esc to Cancel" msgstr "" #: ../bin/ccornu.c:2680 msgid "Put other end of Cornu on a track with an unconnected end point" msgstr "" #: ../bin/ccornu.c:2941 ../bin/ccornu.c:3166 #, fuzzy msgid "Not on a Track" msgstr "Не на треке" #: ../bin/ccornu.c:2949 #, fuzzy msgid "Select a Track To Convert" msgstr "Выберите трек" #: ../bin/ccornu.c:2952 msgid "Convert all Selected Tracks to Cornu Tracks?" msgstr "" #: ../bin/ccornu.c:2958 msgid "Convert Cornu" msgstr "" #: ../bin/ccornu.c:3118 #, c-format msgid "Tracks Counts: %d converted %d unconvertible %d created %d deleted" msgstr "" #: ../bin/ccornu.c:3118 ../bin/ccornu.c:3241 ../bin/cturnout.c:352 #: ../bin/paramfilelist.c:113 msgid "OK" msgstr "" #: ../bin/ccornu.c:3173 msgid "Select a Cornu or Bezier Track To Convert to Fixed" msgstr "" #: ../bin/ccornu.c:3176 msgid "Convert all Selected Tracks to Fixed Tracks?" msgstr "" #: ../bin/ccornu.c:3187 msgid "Convert Bezier and Cornu" msgstr "" #: ../bin/ccornu.c:3240 #, c-format msgid "Tracks Counts: %d converted %d unconvertible %d deleted" msgstr "" #: ../bin/ccornu.c:3269 #, fuzzy msgid "Convert" msgstr "Содержание" #: ../bin/ccornu.c:3270 msgid "Convert To Cornu" msgstr "" #: ../bin/ccornu.c:3273 #, fuzzy msgid "Convert From Cornu" msgstr "По хорде" #: ../bin/ccurve.c:165 #, fuzzy msgid "Drag from endpoint in direction of curve - lock to track open endpoint" msgstr "Тащите из конечной точки по направлению к кривой" #: ../bin/ccurve.c:167 #, fuzzy msgid "Drag from endpoint in direction of curve" msgstr "Тащите из конечной точки по направлению к кривой" #: ../bin/ccurve.c:172 msgid "Drag from endpoint to center - lock to track open endpoint" msgstr "" #: ../bin/ccurve.c:174 #, fuzzy msgid "Drag from endpoint to center" msgstr "Тащите из конечной точки к центру" #: ../bin/ccurve.c:178 #, fuzzy msgid "Drag from center to endpoint" msgstr "Тащите из центра к конечной точке" #: ../bin/ccurve.c:181 msgid "Drag from one to other end of chord" msgstr "" #: ../bin/ccurve.c:243 #, fuzzy msgid "End locked: Drag out curve start" msgstr "Тащите по касательной к первому концу" #: ../bin/ccurve.c:244 ../bin/ccurve.c:254 ../bin/ccurve.c:272 msgid "End Position locked: Drag out curve start with Shift" msgstr "" #: ../bin/ccurve.c:245 msgid "Drag along curve start" msgstr "Тащите по касательной к первому концу" #: ../bin/ccurve.c:253 msgid "End locked: Drag out curve center" msgstr "" #: ../bin/ccurve.c:255 #, fuzzy msgid "Drag out curve center" msgstr "Тащите по касательной к первому концу" #: ../bin/ccurve.c:262 #, fuzzy msgid "Drag out from center to endpoint" msgstr "Тащите из центра к конечной точке" #: ../bin/ccurve.c:271 #, fuzzy msgid "End locked: Drag to other end of chord" msgstr "Тащите к другому концу хорды" #: ../bin/ccurve.c:274 msgid "Drag to other end of chord" msgstr "Тащите к другому концу хорды" #: ../bin/ccurve.c:332 #, c-format msgid "Start Locked: Drag out curve start - Angle=%0.3f" msgstr "" #: ../bin/ccurve.c:333 #, c-format msgid "Drag out curve start - Angle=%0.3f" msgstr "Тащите до начала скругления - Угол=%0.3f" #: ../bin/ccurve.c:340 #, fuzzy, c-format msgid "Tangent locked: Drag out center - Radius=%s Angle=%0.3f" msgstr "Тащите к центру - Радиус=%s Угол=%0.3f" #: ../bin/ccurve.c:341 #, c-format msgid "Drag out center - Radius=%s Angle=%0.3f" msgstr "Тащите к центру - Радиус=%s Угол=%0.3f" #: ../bin/ccurve.c:348 #, fuzzy, c-format msgid "Drag to Edge: Radius=%s Angle=%0.3f" msgstr "Тащите к центру - Радиус=%s Угол=%0.3f" #: ../bin/ccurve.c:356 #, fuzzy, c-format msgid "Start locked: Drag out chord length=%s angle=%0.3f" msgstr "Длина прямого трека=%s Угол=%0.3f" #: ../bin/ccurve.c:357 #, fuzzy, c-format msgid "Drag out chord length=%s angle=%0.3f" msgstr "Длина прямого трека=%s Угол=%0.3f" #: ../bin/ccurve.c:433 ../bin/ccurve.c:615 ../bin/cjoin.c:714 #: ../bin/cjoin.c:1017 #, fuzzy msgid "Desired Radius" msgstr "Радиус окружности" #: ../bin/ccurve.c:534 ../bin/cjoin.c:216 ../bin/cmodify.c:639 #: ../bin/cturntbl.c:687 #, c-format msgid "Straight Track: Length=%s Angle=%0.3f" msgstr "Прямой трек: Длина=%s Угол=%0.3f" #: ../bin/ccurve.c:542 ../bin/cmodify.c:644 ../bin/drawgeom.c:718 msgid "Back" msgstr "Назад" #: ../bin/ccurve.c:563 #, c-format msgid "Curved Track: Radius=%s Angle=%0.3f Length=%s" msgstr "Кривой трек: Радиус=%s Угол=%0.3f Длина=%s" #: ../bin/ccurve.c:642 ../bin/cstraigh.c:173 msgid "Create Straight Track" msgstr "Добавить прямой трек" #: ../bin/ccurve.c:656 msgid "Create Curved Track" msgstr "Добавить изогнутый трек" #: ../bin/ccurve.c:726 msgid "Elevation Difference" msgstr "Разница высот" #: ../bin/ccurve.c:727 ../bin/cdraw.c:559 ../bin/cdraw.c:1585 #: ../bin/cdraw.c:1732 ../bin/cdraw.c:2850 ../bin/cdraw.c:3050 #: ../bin/cdraw.c:3064 ../bin/compound.c:723 ../bin/compound.c:728 #: ../bin/compound.c:733 ../bin/compound.c:738 ../bin/ctodesgn.c:187 #: ../bin/ctodesgn.c:188 ../bin/ctodesgn.c:189 ../bin/ctodesgn.c:190 #: ../bin/ctodesgn.c:317 ../bin/ctodesgn.c:320 ../bin/ctodesgn.c:322 #: ../bin/ctodesgn.c:396 ../bin/ctodesgn.c:397 ../bin/ctodesgn.c:402 #: ../bin/ctodesgn.c:478 ../bin/ctodesgn.c:482 ../bin/ctodesgn.c:483 #: ../bin/ctodesgn.c:489 ../bin/ctodesgn.c:696 ../bin/tbezier.c:285 #: ../bin/tbezier.c:292 ../bin/tcornu.c:326 ../bin/tcurve.c:401 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:187 msgid "Radius" msgstr "Радиус" #: ../bin/ccurve.c:728 ../bin/tcurve.c:402 msgid "Turns" msgstr "Повороты" #: ../bin/ccurve.c:729 msgid "Angular Separation" msgstr "Деление угла" #: ../bin/ccurve.c:730 ../bin/celev.c:43 ../bin/compound.c:740 #: ../bin/tbezier.c:297 ../bin/tcornu.c:333 ../bin/tcurve.c:408 #: ../bin/tease.c:534 ../bin/tstraigh.c:93 msgid "Grade" msgstr "Наклон" #: ../bin/ccurve.c:731 msgid "Vertical Separation" msgstr "Деление вертикали" #: ../bin/ccurve.c:733 msgid "Total Length" msgstr "Общая длина" #: ../bin/ccurve.c:813 #, c-format msgid "Total Length %s" msgstr "Общая длина %s" #: ../bin/ccurve.c:852 ../bin/ccurve.c:1079 ../bin/tcurve.c:1008 msgid "Helix" msgstr "Спираль" #: ../bin/ccurve.c:868 msgid "Circle Radius" msgstr "Радиус окружности" #: ../bin/ccurve.c:873 msgid "Click on Circle Edge" msgstr "Нажмите на окружность" #: ../bin/ccurve.c:877 msgid "Click on Circle Center" msgstr "Нажмите на центр круга" #: ../bin/ccurve.c:907 msgid "Drag to Center" msgstr "Тащите в центр" #: ../bin/ccurve.c:911 msgid "Drag to Edge" msgstr "Тащите к стороне" #: ../bin/ccurve.c:932 ../bin/ccurve.c:936 #, c-format msgid "Radius=%s" msgstr "Радиус=%s" #: ../bin/ccurve.c:957 msgid "Create Helix Track" msgstr "Добавить спиральный трек" #: ../bin/ccurve.c:972 msgid "Create Circle Track" msgstr "Добавить круглый трек" #: ../bin/ccurve.c:1031 msgid "Curve Track" msgstr "Кривой трек" #: ../bin/ccurve.c:1031 msgid "Curve Tracks" msgstr "Кривые треки" #: ../bin/ccurve.c:1032 msgid "Curve from End-Pt" msgstr "Кривая из конечной точки" #: ../bin/ccurve.c:1035 msgid "Curve from Tangent" msgstr "Кривая по касательной" #: ../bin/ccurve.c:1038 msgid "Curve from Center" msgstr "Кривая из центра" #: ../bin/ccurve.c:1041 msgid "Curve from Chord" msgstr "По хорде" #: ../bin/ccurve.c:1044 ../bin/cdraw.c:3199 msgid "Bezier Curve" msgstr "Кривая Безье" #: ../bin/ccurve.c:1047 #, fuzzy msgid "Cornu Curve" msgstr "Отриц." #: ../bin/ccurve.c:1052 ../bin/tcurve.c:684 msgid "Circle Track" msgstr "Окружность" #: ../bin/ccurve.c:1052 msgid "Circle Tracks" msgstr "Окружности" #: ../bin/ccurve.c:1054 msgid "Fixed Radius Circle" msgstr "Окружность по радиусу" #: ../bin/ccurve.c:1056 msgid "Circle from Tangent" msgstr "Окружность по касательной" #: ../bin/ccurve.c:1059 msgid "Circle from Center" msgstr "Окружность к центру" #: ../bin/ccontrol.c:169 ../bin/csensor.c:161 ../bin/csignal.c:237 #: ../bin/ctrain.c:180 msgid "Position" msgstr "Позиция" #: ../bin/ccontrol.c:170 ../bin/ccontrol.c:431 msgid "On Script" msgstr "Включить скрипт" #: ../bin/ccontrol.c:171 ../bin/ccontrol.c:433 msgid "Off Script" msgstr "Отключить скрипт" #: ../bin/ccontrol.c:238 msgid "Change Control" msgstr "Изменение управления" #: ../bin/ccontrol.c:281 ../bin/csensor.c:251 #, fuzzy, c-format msgid "(%d [%s]): Layer=%u, at %0.3f,%0.3f" msgstr "(%d [%s]): Слой=%d, по %0.3f,%0.3f" #: ../bin/ccontrol.c:294 ../bin/ccontrol.c:644 msgid "Control" msgstr "Управление" #: ../bin/ccontrol.c:427 ../bin/csensor.c:391 ../bin/csignal.c:512 msgid "Origin X" msgstr "Координата X" #: ../bin/ccontrol.c:429 ../bin/csensor.c:393 ../bin/csignal.c:514 msgid "Origin Y" msgstr "Координата Y" #: ../bin/ccontrol.c:445 msgid "Create Control" msgstr "Создать управление" #: ../bin/ccontrol.c:448 msgid "Modify Control" msgstr "" #: ../bin/ccontrol.c:488 msgid "Edit control" msgstr "" #: ../bin/ccontrol.c:529 msgid "Place control" msgstr "" #: ../bin/cdraw.c:125 msgid "Font Size must be > 0" msgstr "Размер шрифта должен быть больше нуля" #: ../bin/cdraw.c:553 msgid "First Point: X,Y" msgstr "" #: ../bin/cdraw.c:554 ../bin/tcurve.c:400 msgid "Center: X,Y" msgstr "Центр: X,Y" #: ../bin/cdraw.c:555 ../bin/tcurve.c:405 msgid "Angular Length" msgstr "Длина дуги" #: ../bin/cdraw.c:556 #, fuzzy msgid "Line Angle" msgstr "Угол слева" #: ../bin/cdraw.c:557 ../bin/tcurve.c:406 msgid "CCW Angle" msgstr "Угол ПЧС" #: ../bin/cdraw.c:558 ../bin/tcurve.c:407 msgid "CW Angle" msgstr "Угол ЧС" #: ../bin/cdraw.c:561 ../bin/cdraw.c:1582 ../bin/cdraw.c:1705 #: ../bin/cprint.c:131 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:185 msgid "Height" msgstr "Высота" #: ../bin/cdraw.c:562 ../bin/cdraw.c:1580 ../bin/cdraw.c:1704 #: ../bin/cdraw.c:2845 ../bin/cdraw.c:3110 ../bin/ctrain.c:183 #: ../bin/dcar.c:2344 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:192 msgid "Width" msgstr "Ширина" #: ../bin/cdraw.c:563 ../bin/compound.c:743 ../bin/tstraigh.c:94 msgid "Pivot" msgstr "Центр" #: ../bin/cdraw.c:564 msgid "Point Count" msgstr "Число точек" #: ../bin/cdraw.c:565 ../bin/cdraw.c:2823 ../bin/ctodesgn.c:209 #: ../bin/tbezier.c:299 msgid "Line Width" msgstr "Ширина линии" #: ../bin/cdraw.c:566 ../bin/cdraw.c:2852 ../bin/tbezier.c:298 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:379 #, fuzzy msgid "Line Type" msgstr "Тип древесины" #: ../bin/cdraw.c:567 ../bin/cdraw.c:2825 ../bin/cdraw.c:2827 #: ../bin/cdraw.c:2927 ../bin/cdraw.c:2960 ../bin/cmisc.c:121 #: ../bin/ctext.c:67 ../bin/ctext.c:145 ../bin/ctodesgn.c:210 #: ../bin/dcar.c:2340 ../bin/dlayer.c:545 ../bin/doption.c:591 msgid "Color" msgstr "Цвет" #: ../bin/cdraw.c:568 #, fuzzy msgid "Filled" msgstr "Закрашенный прямоугольник" #: ../bin/cdraw.c:569 #, fuzzy msgid "Open End" msgstr "На ребро" #: ../bin/cdraw.c:570 ../bin/cmisc.c:144 ../bin/cmisc.c:145 ../bin/cmisc.c:146 #: ../bin/cmisc.c:147 ../bin/ctext.c:69 ../bin/ctext.c:146 #, fuzzy msgid "Boxed" msgstr "Прямоугольник" #: ../bin/cdraw.c:571 ../bin/cdraw.c:1177 ../bin/cdraw.c:2859 msgid "Lumber" msgstr "Древесина" #: ../bin/cdraw.c:572 msgid "Orientation" msgstr "Ориентация" #: ../bin/cdraw.c:573 ../bin/cdraw.c:2841 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:679 msgid "Size" msgstr "Размер" #: ../bin/cdraw.c:574 #, fuzzy msgid "Text Origin: X,Y" msgstr "Начало: X,Y" #: ../bin/cdraw.c:575 #, fuzzy msgid "Text Angle" msgstr "Угол слева" #: ../bin/cdraw.c:576 ../bin/ctext.c:65 ../bin/ctext.c:144 msgid "Font Size" msgstr "Размер шрифта" #: ../bin/cdraw.c:577 ../bin/cdraw.c:1324 ../bin/ctext.c:273 msgid "Text" msgstr "Текст" #: ../bin/cdraw.c:578 msgid "Lock To Origin" msgstr "" #: ../bin/cdraw.c:579 #, fuzzy msgid "Rot Origin: X,Y" msgstr "Начало: X,Y" #: ../bin/cdraw.c:580 #, fuzzy msgid "Rotate By" msgstr "Повернуть" #: ../bin/cdraw.c:581 ../bin/compound.c:749 ../bin/cturntbl.c:277 #: ../bin/doption.c:101 ../bin/doption.c:102 ../bin/tbezier.c:301 #: ../bin/tcornu.c:334 ../bin/tcurve.c:410 ../bin/tease.c:536 #: ../bin/tstraigh.c:95 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:757 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:758 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:759 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:760 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:761 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:762 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:763 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:764 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:765 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:766 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:767 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:768 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:769 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:770 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:771 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:772 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:773 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:774 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:775 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:776 msgid "Layer" msgstr "Слой" #: ../bin/cdraw.c:1057 ../bin/cmisc.c:233 ../bin/cmodify.c:379 #: ../bin/compound.c:848 ../bin/ctrain.c:218 msgid "Change Track" msgstr "Изменить трек" #: ../bin/cdraw.c:1162 msgid "Straight Line" msgstr "Прямая линия" #: ../bin/cdraw.c:1167 ../bin/cdraw.c:3190 msgid "Dimension Line" msgstr "Размеры линии" #: ../bin/cdraw.c:1188 ../bin/cdraw.c:2860 ../bin/cdraw.c:3192 msgid "Table Edge" msgstr "Край стола" #: ../bin/cdraw.c:1212 ../bin/cdraw.c:2865 ../bin/cdraw.c:2866 #: ../bin/cdraw.c:2867 msgid "Circle" msgstr "Окружность" #: ../bin/cdraw.c:1227 msgid "Curved Line" msgstr "Кривая линия" #: ../bin/cdraw.c:1249 ../bin/cdraw.c:2870 ../bin/cdraw.c:2871 #: ../bin/cdraw.c:2872 msgid "Filled Circle" msgstr "Круг" #: ../bin/cdraw.c:1279 #, fuzzy msgid "Filled Rectangle" msgstr "Прямоугольник" #: ../bin/cdraw.c:1279 msgid "Rectangle" msgstr "Прямоугольник" #: ../bin/cdraw.c:1293 ../bin/cdraw.c:2876 msgid "Polyline" msgstr "Полилиния" #: ../bin/cdraw.c:1300 ../bin/cdraw.c:2874 ../bin/cdraw.c:3213 #, fuzzy msgid "Filled Polygon" msgstr "Закрашенный прямоугольник" #: ../bin/cdraw.c:1300 ../bin/cdraw.c:2869 ../bin/cdraw.c:3212 msgid "Polygon" msgstr "Многоугольник" #: ../bin/cdraw.c:1330 #, fuzzy, c-format msgid "%s(%d) Layer=%d" msgstr "%s: Слой=%d" #: ../bin/cdraw.c:1355 ../bin/cdraw.c:2930 ../bin/compound.c:1156 #: ../bin/doption.c:96 ../bin/tbezier.c:519 msgid "Solid" msgstr "Закрашенные" #: ../bin/cdraw.c:1356 ../bin/cdraw.c:2932 ../bin/compound.c:1157 #: ../bin/doption.c:93 ../bin/tbezier.c:520 msgid "Dash" msgstr "Пунктиром" #: ../bin/cdraw.c:1357 ../bin/cdraw.c:2931 ../bin/compound.c:1158 #: ../bin/tbezier.c:521 msgid "Dot" msgstr "" #: ../bin/cdraw.c:1358 ../bin/compound.c:1159 ../bin/tbezier.c:522 #, fuzzy msgid "DashDot" msgstr "Пунктиром" #: ../bin/cdraw.c:1359 ../bin/compound.c:1161 ../bin/tbezier.c:523 msgid "DashDotDot" msgstr "" #: ../bin/cdraw.c:1360 ../bin/compound.c:1163 ../bin/tbezier.c:524 #, fuzzy msgid "CenterDot" msgstr "Управление" #: ../bin/cdraw.c:1361 ../bin/compound.c:1165 ../bin/tbezier.c:525 msgid "PhantomDot" msgstr "" #: ../bin/cdraw.c:1366 ../bin/cdraw.c:2981 msgid "Tiny" msgstr "Крошечный" #: ../bin/cdraw.c:1367 ../bin/cdraw.c:2982 msgid "Small" msgstr "Маленький" #: ../bin/cdraw.c:1368 ../bin/cdraw.c:2983 msgid "Medium" msgstr "Средний" #: ../bin/cdraw.c:1369 ../bin/cdraw.c:2984 msgid "Large" msgstr "Большой" #: ../bin/cdraw.c:1575 ../bin/cdraw.c:1721 ../bin/cdraw.c:2848 #: ../bin/cdraw.c:3071 ../bin/cdraw.c:3092 ../bin/cdraw.c:3096 #: ../bin/compound.c:721 ../bin/compound.c:726 ../bin/compound.c:731 #: ../bin/compound.c:736 ../bin/compound.c:742 ../bin/cprint.c:156 #: ../bin/csignal.c:238 ../bin/csignal.c:516 ../bin/ctodesgn.c:195 #: ../bin/ctodesgn.c:196 ../bin/ctodesgn.c:197 ../bin/ctodesgn.c:199 #: ../bin/ctodesgn.c:243 ../bin/ctodesgn.c:269 ../bin/ctodesgn.c:271 #: ../bin/ctodesgn.c:315 ../bin/ctodesgn.c:318 ../bin/ctodesgn.c:349 #: ../bin/ctodesgn.c:352 ../bin/ctodesgn.c:394 ../bin/ctodesgn.c:399 #: ../bin/ctodesgn.c:427 ../bin/ctodesgn.c:431 ../bin/ctodesgn.c:476 #: ../bin/ctodesgn.c:480 ../bin/ctodesgn.c:485 ../bin/ctodesgn.c:515 #: ../bin/ctodesgn.c:539 ../bin/ctodesgn.c:564 ../bin/ctodesgn.c:697 #: ../bin/ctrain.c:181 ../bin/tease.c:529 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:183 msgid "Angle" msgstr "Угол" #: ../bin/cdraw.c:1578 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:188 #, fuzzy msgid "Relative Angle" msgstr "Угол слева" #: ../bin/cdraw.c:1587 ../bin/cdraw.c:1737 ../bin/cdraw.c:3065 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:184 #, fuzzy msgid "Arc Angle" msgstr "Угол" #: ../bin/cdraw.c:1589 #, fuzzy msgid "Rotate Angle" msgstr "Угол справа" #: ../bin/cdraw.c:1592 #, fuzzy msgid "Rot Center X,Y" msgstr "Центр: X,Y" #: ../bin/cdraw.c:1692 #, fuzzy msgid "Seg Lth" msgstr "Длина" #: ../bin/cdraw.c:1693 msgid "Rel Ang" msgstr "" #: ../bin/cdraw.c:2830 ../bin/cdraw.c:2832 ../bin/cdraw.c:2958 msgid "Lumber Type" msgstr "Тип древесины" #: ../bin/cdraw.c:2857 msgid "Straight" msgstr "Прямая" #: ../bin/cdraw.c:2858 msgid "Dimension" msgstr "" #: ../bin/cdraw.c:2861 ../bin/cdraw.c:2862 ../bin/cdraw.c:2863 #: ../bin/cdraw.c:2864 msgid "Curved" msgstr "Кривая" #: ../bin/cdraw.c:2868 ../bin/cdraw.c:3210 msgid "Box" msgstr "Прямоугольник" #: ../bin/cdraw.c:2873 ../bin/cdraw.c:3211 msgid "Filled Box" msgstr "Закрашенный прямоугольник" #: ../bin/cdraw.c:2875 ../bin/tbezier.c:516 msgid "Bezier Line" msgstr "Кривая Безье" #: ../bin/cdraw.c:2925 #, c-format msgid "%s Line Width" msgstr "%s, ширина" #: ../bin/cdraw.c:2928 ../bin/dcar.c:2313 ../bin/dcar.c:4694 #: ../bin/dcar.c:4700 msgid "Type" msgstr "Тип" #: ../bin/cdraw.c:2933 #, fuzzy msgid "Dash-Dot" msgstr "Пунктиром" #: ../bin/cdraw.c:2934 msgid "Dash-Dot-Dot" msgstr "" #: ../bin/cdraw.c:2947 #, c-format msgid "%s Color" msgstr "%s Цвет" #: ../bin/cdraw.c:2979 msgid "Dimension Line Size" msgstr "Размер линии" #: ../bin/cdraw.c:2991 msgid "Drag to create Table Edge" msgstr "Тащите, чтобы создать край стола" #: ../bin/cdraw.c:3089 #, fuzzy msgid "Seg Length" msgstr "Длина слева" #: ../bin/cdraw.c:3094 #, fuzzy msgid "Rel Angle" msgstr "Угол слева" #: ../bin/cdraw.c:3189 msgid "Line" msgstr "Прямая" #: ../bin/cdraw.c:3189 msgid "Draw Line" msgstr "Прямая" #: ../bin/cdraw.c:3190 msgid "Draw Dimension Line" msgstr "Выноска с размером" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:479 #: ../bin/cdraw.c:3191 ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1270 msgid "Benchwork" msgstr "Доска" #: ../bin/cdraw.c:3191 msgid "Draw Benchwork" msgstr "Доска" #: ../bin/cdraw.c:3192 msgid "Draw Table Edge" msgstr "Край стола" #: ../bin/cdraw.c:3195 msgid "Curve End" msgstr "Конец кривой" #: ../bin/cdraw.c:3195 msgid "Draw Curve from End" msgstr "От касательной" #: ../bin/cdraw.c:3196 msgid "Curve Tangent" msgstr "Тангенс кривой" #: ../bin/cdraw.c:3196 msgid "Draw Curve from Tangent" msgstr "По окружности от края" #: ../bin/cdraw.c:3197 msgid "Curve Center" msgstr "Центр кривой" #: ../bin/cdraw.c:3197 msgid "Draw Curve from Center" msgstr "По окружности от центра" #: ../bin/cdraw.c:3198 msgid "Curve Chord" msgstr "Хорда кривой" #: ../bin/cdraw.c:3198 msgid "Draw Curve from Chord" msgstr "Кривая по хорде" #: ../bin/cdraw.c:3199 msgid "Draw Bezier" msgstr "Кривая Безье" #: ../bin/cdraw.c:3203 msgid "Circle Center" msgstr "Центр окружности" #: ../bin/cdraw.c:3203 msgid "Draw Circle from Center" msgstr "Окружность от края" #: ../bin/cdraw.c:3204 msgid "Circle Tangent" msgstr "Касательная к окружности" #: ../bin/cdraw.c:3204 msgid "Draw Circle from Tangent" msgstr "Окружность из центра" #: ../bin/cdraw.c:3206 msgid "Circle Filled Center" msgstr "Круг к центру" #: ../bin/cdraw.c:3206 msgid "Draw Filled Circle from Center" msgstr "Круг от края" #: ../bin/cdraw.c:3207 msgid "Circle Filled Tangent" msgstr "Круг от касательной" #: ../bin/cdraw.c:3207 msgid "Draw Filled Circle from Tangent" msgstr "Круг из центра" #: ../bin/cdraw.c:3210 msgid "Draw Box" msgstr "Прямоугольник" #: ../bin/cdraw.c:3211 msgid "Draw Filled Box" msgstr "Закрашенный прямоугольник" #: ../bin/cdraw.c:3212 msgid "Draw Polygon" msgstr "Рисовать полигон" #: ../bin/cdraw.c:3213 #, fuzzy msgid "Draw Filled Polygon" msgstr "Рисовать полигон" #: ../bin/cdraw.c:3214 #, fuzzy msgid "PolyLine" msgstr "Ломаная" #: ../bin/cdraw.c:3214 #, fuzzy msgid "Draw PolyLine" msgstr "Рисовать полилинию" #: ../bin/cdraw.c:3231 msgid "Straight Objects" msgstr "Прямые объекты" #: ../bin/cdraw.c:3231 msgid "Draw Straight Objects" msgstr "Рисовать прямые объекты" #: ../bin/cdraw.c:3232 msgid "Curved Lines" msgstr "Кривые линии" #: ../bin/cdraw.c:3232 msgid "Draw Curved Lines" msgstr "Рисовать кривые линии" #: ../bin/cdraw.c:3233 msgid "Circle Lines" msgstr "Окружности" #: ../bin/cdraw.c:3233 msgid "Draw Circles" msgstr "Рисовать окружности" #: ../bin/cdraw.c:3234 msgid "Shapes" msgstr "Фигуры" #: ../bin/cdraw.c:3234 msgid "Draw Shapes" msgstr "Рисовать фигуры" #: ../bin/cdraw.c:3536 msgid "Close Polygon - 'g'" msgstr "" #: ../bin/cdraw.c:3538 msgid "Make PolyLine - 'l'" msgstr "" #: ../bin/cdraw.c:3540 msgid "Fill Polygon - 'f'" msgstr "" #: ../bin/cdraw.c:3542 msgid "Empty Polygon - 'u'" msgstr "" #: ../bin/cdraw.c:3545 msgid "Points Mode - 'p'" msgstr "" #: ../bin/cdraw.c:3548 msgid "Delete Selected Point - 'Del'" msgstr "" #: ../bin/cdraw.c:3549 msgid "Vertex Point - 'v'" msgstr "" #: ../bin/cdraw.c:3551 msgid "Round Corner - 'r'" msgstr "" #: ../bin/cdraw.c:3553 msgid "Smooth Corner - 's'" msgstr "" #: ../bin/cdraw.c:3556 ../bin/cselect.c:3734 msgid "LineType..." msgstr "" #: ../bin/cdraw.c:3557 ../bin/cselect.c:3735 #, fuzzy msgid "Solid Line" msgstr "Ломаная" #: ../bin/cdraw.c:3559 ../bin/cselect.c:3737 #, fuzzy msgid "Dashed Line" msgstr "Прямая" #: ../bin/cdraw.c:3561 ../bin/cselect.c:3739 #, fuzzy msgid "Dotted Line" msgstr "Кривая линия" #: ../bin/cdraw.c:3563 #, fuzzy msgid "Dash-Dot Line" msgstr "Прямая" #: ../bin/cdraw.c:3565 msgid "Dash-Dot-Dot Line" msgstr "" #: ../bin/cdraw.c:3567 #, fuzzy msgid "Center-Dot Line" msgstr "Создать линии" #: ../bin/cdraw.c:3569 msgid "Phantom-Dot Line" msgstr "" #: ../bin/cdraw.c:3572 msgid "Origin Mode - 'o'" msgstr "" #: ../bin/cdraw.c:3574 msgid "Reset Origin - '0'" msgstr "" #: ../bin/cdraw.c:3576 msgid "Origin to Selected - 'l'" msgstr "" #: ../bin/cdraw.c:3578 msgid "Origin to Middle - 'm'" msgstr "" #: ../bin/celev.c:42 ../bin/cprint.c:117 ../bin/cprofile.c:1531 #: ../bin/csplit.c:201 ../bin/csplit.c:210 ../bin/dease.c:68 #: ../bin/doption.c:94 ../bin/doption.c:96 msgid "None" msgstr "Нет" #: ../bin/celev.c:42 msgid "Defined" msgstr "По-умолчанию" #: ../bin/celev.c:42 msgid "Hidden" msgstr "Скрытая" #: ../bin/celev.c:43 msgid "Computed" msgstr "Вычисленная" #: ../bin/celev.c:43 msgid "Station" msgstr "Станция" #: ../bin/celev.c:43 ../bin/cprofile.c:1529 ../bin/dcmpnd.c:71 msgid "Ignore" msgstr "Игнорировать" #: ../bin/celev.c:233 msgid "Set Elevation" msgstr "Установить высоту" #: ../bin/celev.c:325 ../bin/celev.c:334 ../bin/celev.c:338 #, c-format msgid "Undefined" msgstr "Неопределено" #: ../bin/celev.c:384 ../bin/celev.c:541 msgid "Elevation" msgstr "Высота" #: ../bin/celev.c:385 ../bin/cmisc.c:467 ../bin/dcustmgm.c:407 #: ../bin/dcontmgm.c:308 ../bin/dlayer.c:2071 ../bin/dpricels.c:167 #: ../bin/filenoteui.c:253 ../bin/linknoteui.c:169 #: ../bin/paramfilesearch_ui.c:477 ../bin/textnoteui.c:137 msgid "Done" msgstr "ОК" #: ../bin/celev.c:399 msgid "" "Click on end, +Shift to split, +Ctrl to move description, +Alt to show " "elevation" msgstr "" #: ../bin/celev.c:420 msgid "Move to end or track crossing +Shift to split" msgstr "" #: ../bin/celev.c:424 msgid "Move to end or track crossing" msgstr "" #: ../bin/celev.c:436 #, c-format msgid "Crossing - First %0.3f, Second %0.3f, Clearance %0.3f - Click to Split" msgstr "" #: ../bin/celev.c:439 #, c-format msgid "Crossing - First %0.3f, Second %0.3f, Clearance %0.3f" msgstr "" #: ../bin/celev.c:453 #, c-format msgid "Click to split here - elevation %0.3f" msgstr "" #: ../bin/celev.c:458 #, fuzzy, c-format msgid "Track End elevation %0.3f - snap End Pt" msgstr "Высоты трека" #: ../bin/celev.c:461 #, fuzzy, c-format msgid "Track End elevation %0.3f" msgstr "Высоты трека" #: ../bin/celev.c:463 ../bin/celev.c:466 msgid "" "Click on End Pt, +Shift to split, +Ctrl to move description, +Alt show " "Elevation" msgstr "" #: ../bin/celev.c:486 msgid "Click on end, +Shift to split, +Ctrl to move description" msgstr "" #: ../bin/celev.c:490 #, fuzzy msgid "Split track" msgstr "Разделить трек" #: ../bin/celev.c:496 #, fuzzy msgid "Track split!" msgstr "Треки" #: ../bin/celev.c:503 #, fuzzy msgid "Point selected!" msgstr "невыбранные" #: ../bin/cgroup.c:664 msgid "Ungroup Object" msgstr "Разгруппировать объект" #: ../bin/cgroup.c:677 #, c-format msgid "%d objects ungrouped" msgstr "%d объектов разгруппировано" #: ../bin/cgroup.c:679 msgid "No objects ungrouped" msgstr "Нет объектов для разгруппировки" #: ../bin/cgroup.c:693 msgid "Replace with new group?" msgstr "Заменить новой группой?" #: ../bin/cgroup.c:694 msgid "Turntable/TransferTable/DblSlipSwith?" msgstr "" #: ../bin/cgroup.c:700 ../bin/compound.c:744 ../bin/cstruct.c:65 #: ../bin/ctodesgn.c:201 ../bin/ctodesgn.c:3209 ../bin/cturnout.c:84 #: ../bin/dcar.c:2305 ../bin/dcar.c:4694 ../bin/dcar.c:4700 #: ../bin/dcmpnd.c:483 ../bin/dcustmgm.c:45 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:417 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:656 msgid "Manufacturer" msgstr "Производитель" #: ../bin/cgroup.c:701 ../bin/cmisc.c:467 ../bin/cstruct.c:65 #: ../bin/ctodesgn.c:3210 ../bin/ctodesgn.c:3211 ../bin/ctrain.c:184 #: ../bin/cturnout.c:84 ../bin/dcar.c:2321 ../bin/dcar.c:4695 #: ../bin/dcar.c:4701 ../bin/dcmpnd.c:484 ../bin/dcustmgm.c:46 #: ../bin/denum.c:188 ../bin/denum.c:189 ../bin/denum.c:194 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:418 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:650 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:651 msgid "Description" msgstr "Описание" #: ../bin/cgroup.c:702 ../bin/dcmpnd.c:485 msgid "#" msgstr "#" #: ../bin/cgroup.c:703 ../bin/compound.c:748 msgid "# Segments" msgstr "# сегментов" #: ../bin/cgroup.c:705 #, fuzzy msgid "Offset X,Y:" msgstr "Смещение" #: ../bin/cgroup.c:1320 msgid "No endpts" msgstr "" #: ../bin/cgroup.c:1732 ../bin/cgroup.c:1798 msgid "Group Tracks" msgstr "" #: ../bin/cgroup.c:1866 msgid "Group Objects" msgstr "" #: ../bin/chndldto.c:68 msgid "Place frog and drag angle" msgstr "" #: ../bin/chndldto.c:85 msgid "frog" msgstr "стрелка" #: ../bin/chndldto.c:91 msgid "Drag to set angle" msgstr "Тащите для установки угла" #: ../bin/chndldto.c:132 #, c-format msgid "Angle = %0.2f Frog# = %0.2f" msgstr "Угол = %0.2f Стрелка# = %0.2f" #: ../bin/chndldto.c:134 msgid "Frog angle is too close to 0" msgstr "Угол стрелки очень маленький" #: ../bin/chndldto.c:137 msgid "Select point position" msgstr "Выберите позицию точки" #: ../bin/chndldto.c:152 ../bin/chndldto.c:178 msgid "points" msgstr "точки" #: ../bin/chndldto.c:282 #, c-format msgid "Length = %0.2f Angle = %0.2f Frog# = %0.2f" msgstr "" #: ../bin/chndldto.c:286 msgid "Create Hand Laid Turnout" msgstr "" #: ../bin/chndldto.c:381 msgid "HandLaidTurnout" msgstr "" #: ../bin/cjoin.c:170 #, c-format msgid "Curved Track: Radius=%s Length=%s" msgstr "Изогнутый трек: Радиус=%s Длина=%s" #: ../bin/cjoin.c:261 #, c-format msgid "Curved Track: Radius=%s Length=%s Angle=%0.3f" msgstr "Изогнутый трек: Радиус=%s Длина=%s Угол=%0.3f" #: ../bin/cjoin.c:363 #, c-format msgid "Track (%d) is too short for transition-curve by %0.3f" msgstr "" #: ../bin/cjoin.c:381 #, c-format msgid "Connecting track is too short by %0.3f" msgstr "" #: ../bin/cjoin.c:431 msgid "Click on an unselected End-Point" msgstr "" #: ../bin/cjoin.c:432 msgid "Click on a selected End-Point" msgstr "" #: ../bin/cjoin.c:438 msgid "unselected" msgstr "невыбранные" #: ../bin/cjoin.c:438 ../bin/cprint.c:162 msgid "selected" msgstr "выбранные" #: ../bin/cjoin.c:499 msgid "Left click - Select first draw object end" msgstr "" #: ../bin/cjoin.c:539 ../bin/cjoin.c:576 msgid "Not a line - Try again" msgstr "" #: ../bin/cjoin.c:572 msgid "Left click - Select second object end" msgstr "" #: ../bin/cjoin.c:584 msgid "Same draw object and same endpoint - Try again" msgstr "" #: ../bin/cjoin.c:632 #, fuzzy msgid "Create PolyLine" msgstr "Создать линии" #: ../bin/cjoin.c:913 msgid "Left click - join with track" msgstr "Левый клик - соединить с треком" #: ../bin/cjoin.c:916 msgid "Left click - join with track, Shift Left click - move to join" msgstr "" #: ../bin/cjoin.c:1011 ../bin/cjoin.c:1469 ../bin/cjoin.c:1476 msgid "Select 2nd track" msgstr "Выберите второй трек" #: ../bin/cjoin.c:1266 msgid "Beyond end of 2nd track" msgstr "" #: ../bin/cjoin.c:1302 msgid "Beyond end of 1st track" msgstr "" #: ../bin/cjoin.c:1325 msgid "First Track Type not supported for non-Cornu Join" msgstr "" #: ../bin/cjoin.c:1333 msgid "First " msgstr "Первый " #: ../bin/cjoin.c:1359 msgid "Second Track Type not supported for non-Cornu Join" msgstr "" #: ../bin/cjoin.c:1366 msgid "Second " msgstr "Второй " #: ../bin/cjoin.c:1380 ../bin/track.c:2395 ../bin/track.c:2434 #: ../bin/track.c:2509 msgid "Connecting " msgstr "Соединение " #: ../bin/cjoin.c:1479 msgid "Join Tracks" msgstr "Соединить треки" #: ../bin/cjoin.c:1575 msgid "Join" msgstr "Присоединить" #: ../bin/cjoin.c:1576 #, fuzzy msgid "Join Track" msgstr "Соединить треки" #: ../bin/cjoin.c:1579 #, fuzzy msgid "Join Lines" msgstr "Окружности" #: ../bin/cmisc.c:55 msgid "Middle" msgstr "Середина" #: ../bin/cmisc.c:55 ../bin/macro.c:70 msgid "End" msgstr "Конец" #: ../bin/cmisc.c:140 ../bin/tcurve.c:409 ../bin/tease.c:535 #, fuzzy msgid "Lock" msgstr "Поезд?" #: ../bin/cmisc.c:593 #, fuzzy msgid "Select track to describe +Shift for Frozen" msgstr "Выберите трек для описания" #: ../bin/cmisc.c:691 ../bin/doption.c:245 msgid "Properties" msgstr "Свойства" #: ../bin/cmodify.c:276 msgid "" "Select a track to modify, Left-Click change length, Right-Click to add " "flextrack" msgstr "" #: ../bin/cmodify.c:520 msgid "Modify Track" msgstr "Изменить трек" #: ../bin/cmodify.c:564 #, fuzzy msgid "Drag to add flex track" msgstr "Тяните, чтобы создавать новые сегменты трека" #: ../bin/cmodify.c:569 #, fuzzy msgid "No track to extend" msgstr "%d треков перемещено" #: ../bin/cmodify.c:574 #, fuzzy msgid "No track selected" msgstr "выбранные" #: ../bin/cmodify.c:724 #, c-format msgid "Curve Track: Radius=%s Length=%s Angle=%0.3f" msgstr "Кривой трек: Радиус=%s Длина=%s Угол=%0.3f" #: ../bin/cmodify.c:740 msgid "Extend Track" msgstr "" #: ../bin/cmodify.c:882 msgid "Modify" msgstr "Изменить" #: ../bin/cmodify.c:895 ../bin/cselect.c:3664 ../bin/cselect.c:3686 #: ../bin/menu.c:937 ../bin/menu.c:939 msgid "Zoom In" msgstr "Приблизить" #: ../bin/cmodify.c:896 ../bin/cselect.c:3669 ../bin/cselect.c:3687 #: ../bin/menu.c:941 ../bin/menu.c:943 msgid "Zoom Out" msgstr "Отдалить" #: ../bin/cmodify.c:897 msgid "Pan center - 'c'" msgstr "" #: ../bin/cnote.c:67 ../bin/textnoteui.c:47 ../bin/trknote.c:52 msgid "Note" msgstr "Заметка" #: ../bin/cnote.c:73 msgid "Replace this text with your layout notes" msgstr "Замените этот текст вашей заметкой к рабочей области" #: ../bin/command.c:388 ../bin/command.c:395 msgid "" "Cancelling the current command will undo the changes\n" "you are currently making. Do you want to do the update instead?" msgstr "" #: ../bin/command.c:390 ../bin/command.c:458 ../bin/cprint.c:1445 #: ../bin/dbitmap.c:428 ../bin/filenoteui.c:157 ../bin/param.c:3013 #: ../bin/svgoutput.c:460 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:675 msgid "Cancel" msgstr "Отмена" #: ../bin/command.c:456 msgid "" "Cancelling the current command will undo the changes\n" "you are currently making. Do you want to update?" msgstr "" #: ../bin/compound.c:722 ../bin/compound.c:727 ../bin/compound.c:732 #: ../bin/compound.c:737 ../bin/tbezier.c:286 ../bin/tbezier.c:293 #: ../bin/tcornu.c:322 ../bin/tcornu.c:327 msgid "Center X,Y" msgstr "" #: ../bin/compound.c:724 ../bin/tbezier.c:287 ../bin/tcornu.c:323 msgid "Z1" msgstr "" #: ../bin/compound.c:729 ../bin/tbezier.c:294 ../bin/tcornu.c:328 msgid "Z2" msgstr "" #: ../bin/compound.c:730 msgid "End Pt 3: X,Y" msgstr "" #: ../bin/compound.c:734 msgid "Z3" msgstr "" #: ../bin/compound.c:735 msgid "End Pt 4: X,Y" msgstr "" #: ../bin/compound.c:739 msgid "Z4" msgstr "" #: ../bin/compound.c:741 ../bin/tease.c:528 msgid "Origin: X,Y" msgstr "Начало: X,Y" #: ../bin/compound.c:746 ../bin/cstruct.c:65 ../bin/cturnout.c:84 #: ../bin/dcar.c:4694 ../bin/dcar.c:4700 ../bin/dcustmgm.c:46 #: ../bin/doption.c:99 ../bin/doption.c:100 msgid "Part No" msgstr "Артикул" #: ../bin/compound.c:747 #, fuzzy msgid "LineType" msgstr "Прямая" #: ../bin/compound.c:1025 ../bin/cstruct.c:1030 ../bin/cstruct.c:1246 msgid "Structure" msgstr "Структура" #: ../bin/compound.c:1027 ../bin/cswitchmotor.c:232 ../bin/cturnout.c:988 msgid "Turnout" msgstr "Стрелка" #: ../bin/compound.c:1027 msgid "Sectional Track" msgstr "Составной трек" #: ../bin/compound.c:1031 #, c-format msgid "%s (%d) Layer= %d %s" msgstr "" #: ../bin/cparalle.c:49 ../bin/cparalle.c:98 ../bin/cparalle.c:140 #: ../bin/ctodesgn.c:600 ../bin/ctodesgn.c:626 ../bin/ctodesgn.c:651 #: ../bin/tcurve.c:403 msgid "Separation" msgstr "" #: ../bin/cparalle.c:52 ../bin/cparalle.c:99 #, fuzzy msgid "Radius Factor" msgstr "Радиус " #: ../bin/cparalle.c:141 #, fuzzy msgid "Radius factor" msgstr "Радиус " #: ../bin/cparalle.c:155 msgid " Track/Line doesn't support parallel" msgstr "" #: ../bin/cparalle.c:230 msgid "Create Parallel Track" msgstr "Добавить параллельный трек" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:470 #: ../bin/cparalle.c:299 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1252 msgid "Parallel" msgstr "Параллель" #: ../bin/cparalle.c:300 #, fuzzy msgid "Parallel Track" msgstr "Добавить параллельный трек" #: ../bin/cparalle.c:303 #, fuzzy msgid "Parallel Line" msgstr "Параллель" #: ../bin/cprint.c:110 msgid "Portrait" msgstr "Портретный" #: ../bin/cprint.c:110 msgid "Landscape" msgstr "Ландшафтный" #: ../bin/cprint.c:111 ../bin/cswitchmotor.c:90 ../bin/cswitchmotor.c:109 #: ../bin/cswitchmotor.c:229 ../bin/dbench.c:75 ../bin/dease.c:68 #: ../bin/doption.c:93 ../bin/doption.c:95 ../bin/macro.c:1416 msgid "Normal" msgstr "Нормальные" #: ../bin/cprint.c:111 ../bin/cswitchmotor.c:91 ../bin/cswitchmotor.c:110 #: ../bin/cswitchmotor.c:230 ../bin/ctrain.c:1011 ../bin/ctrain.c:1324 msgid "Reverse" msgstr "Обратный" #: ../bin/cprint.c:112 msgid "Engineering Data" msgstr "" #: ../bin/cprint.c:113 msgid "Registration Marks (in 1:1 scale only)" msgstr "" #: ../bin/cprint.c:114 #, fuzzy msgid "Page Numbers" msgstr "Номер запчасти" #: ../bin/cprint.c:115 msgid "Ignore Page Margins" msgstr "Игнорировать поля страницы" #: ../bin/cprint.c:116 ../bin/csnap.c:733 ../bin/doption.c:559 msgid "Snap Grid" msgstr "Настройки сетки" #: ../bin/cprint.c:117 #, fuzzy msgid "Layout Edge" msgstr "Проект" #: ../bin/cprint.c:117 msgid "Every Page" msgstr "" #: ../bin/cprint.c:118 #, fuzzy msgid "Roadbed Outline" msgstr "Ширина полотна" #: ../bin/cprint.c:119 msgid "Centerline below Scale 1:1" msgstr "" #: ../bin/cprint.c:128 msgid "Print Scale" msgstr "Печатать масштаб" #: ../bin/cprint.c:129 msgid "Page Width" msgstr "Ширина страницы" #: ../bin/cprint.c:130 msgid "Max" msgstr "Макс." #: ../bin/cprint.c:132 msgid "Snap Shot" msgstr "" #: ../bin/cprint.c:133 msgid "Page Format" msgstr "" #: ../bin/cprint.c:134 msgid "Print Order" msgstr "" #: ../bin/cprint.c:135 #, fuzzy msgid "Print " msgstr "Печать" #: ../bin/cprint.c:144 #, fuzzy msgid "Rulers:" msgstr "Линейка" #: ../bin/cprint.c:150 #, fuzzy msgid " Width" msgstr "Ширина" #: ../bin/cprint.c:152 #, fuzzy msgid "Margins" msgstr "Главный" #: ../bin/cprint.c:153 ../bin/cturntbl.c:274 msgid "Origin: X" msgstr "Координата: X" #: ../bin/cprint.c:154 ../bin/csnap.c:549 msgid "Y" msgstr "Y" #: ../bin/cprint.c:155 ../bin/cprint.c:631 ../bin/cprofile.c:706 #: ../bin/dcar.c:2325 msgid "Reset" msgstr "Сбросить" #: ../bin/cprint.c:157 msgid "Setup" msgstr "Установить" #: ../bin/cprint.c:158 ../bin/cselect.c:3675 ../bin/menu.c:974 msgid "Select All" msgstr "Выбрать всё" #: ../bin/cprint.c:159 ../bin/cprofile.c:708 ../bin/layout.c:671 #: ../bin/misc.c:725 msgid "Clear" msgstr "Очистить" #: ../bin/cprint.c:161 msgid "0 pages" msgstr "0 страниц" #: ../bin/cprint.c:190 #, fuzzy, c-format msgid "%d page" msgstr "%d страниц" #: ../bin/cprint.c:190 #, c-format msgid "%d pages" msgstr "%d страниц" #: ../bin/cprint.c:419 #, c-format msgid "PrintScale 1:%ld Room %s x %s Model Scale %s File %s" msgstr "Масштаб 1:%ld Комната %s x %s Масштаб модели %s Файл %s" #: ../bin/cprint.c:746 #, fuzzy msgid "Print Margins" msgstr "Печатать список частей" #: ../bin/cprint.c:1440 ../bin/cprofile.c:710 ../bin/ctodesgn.c:3147 #: ../bin/denum.c:51 msgid "Print" msgstr "Печать" #: ../bin/cprint.c:1472 msgid "Select pages to print, or drag to move print grid" msgstr "Выберите страницы для печати или перетащите, чтобы передвинуть сетку" #: ../bin/cprint.c:1574 msgid "Print..." msgstr "Печать..." #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:466 #: ../bin/cprofile.c:608 ../bin/cprofile.c:1442 ../bin/cprofile.c:1522 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1244 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:127 msgid "Profile" msgstr "Профиль" #: ../bin/cprofile.c:626 #, c-format msgid "%s Profile: %s" msgstr "%s Профиль: %s" #: ../bin/cprofile.c:704 ../bin/menu.c:225 msgid "Change" msgstr "Изменить" #: ../bin/cprofile.c:751 ../bin/cprofile.c:761 #, c-format msgid "Elev = %0.1f" msgstr "Высота = %0.1f" #: ../bin/cprofile.c:763 #, c-format msgid "Elev=%0.2f %0.1f%%" msgstr "Высота=%0.2f %0.1f%%" #: ../bin/cprofile.c:768 #, c-format msgid "%0.1f%% Elev = %0.2f" msgstr "%0.1f%% Высота = %0.2f" #: ../bin/cprofile.c:773 #, c-format msgid "%0.1f%% Elev = %0.2f %0.1f%%" msgstr "%0.1f%% Высота = %0.2f %0.1f%%" #: ../bin/cprofile.c:788 ../bin/cprofile.c:858 ../bin/cprofile.c:1394 msgid "Profile Command" msgstr "" #: ../bin/cprofile.c:797 ../bin/cprofile.c:1448 msgid "Drag to change Elevation" msgstr "Тяни, чтобы изменить высоту" #: ../bin/cprofile.c:899 msgid "Select a Defined Elevation to start Profile" msgstr "Выберите трек для начальной высоты" #: ../bin/cprofile.c:901 msgid "Select a Defined Elevation to extend Profile" msgstr "Выберите трек для конечной высоты" #: ../bin/cprofile.c:1456 msgid "Select a Defined Elevation to start profile" msgstr "Выберите трек для начальной высоты" #: ../bin/cprofile.c:1527 msgid "Define" msgstr "" #: ../bin/cpull.c:454 ../bin/cpull.c:616 #, c-format msgid "%d tracks moved" msgstr "%d треков перемещено" #: ../bin/cpull.c:503 msgid "Pull Tracks" msgstr "Тяните треки" #: ../bin/cpull.c:579 msgid "Tighten Tracks" msgstr "" #: ../bin/cpull.c:670 msgid "Connect Multiple Tracks - Select multiple tracks to join first" msgstr "" #: ../bin/cpull.c:673 msgid "Try to Connect all Selected Tracks?" msgstr "" #: ../bin/cpull.c:680 msgid "ReConnect" msgstr "" #: ../bin/cpull.c:720 #, c-format msgid "" "Round 1 %d and Round 2 %d tracks connected, %d close pairs of end Points " "were not connected" msgstr "" #: ../bin/cpull.c:747 #, fuzzy msgid "Select first endpoint or turntable to connect, +Shift to tighten" msgstr "Выберите первый конец для соединения" #: ../bin/cpull.c:750 #, fuzzy msgid "" "Select first endpoint to connect, or Right-Click for connecting selected " "tracks (not turntable)" msgstr "" "Выберите первый конец для соединения или щёлкните правой кнопкой мыши для " "соединения выбранных треков" #: ../bin/cpull.c:814 #, fuzzy msgid "Select second endpoint or turntable to connect" msgstr "Выберите второй конец для соединения" #: ../bin/cpull.c:821 msgid "Same Track! - please select another" msgstr "" #: ../bin/cpull.c:918 msgid "Connect Two Tracks" msgstr "Соединить два трека" #: ../bin/cpull.c:924 msgid "Connect All Selected - 'S'" msgstr "" #: ../bin/cruler.c:390 #, fuzzy msgid "Measurement" msgstr "Упрощения" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:477 #: ../bin/cruler.c:391 ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1266 msgid "Ruler" msgstr "Линейка" #: ../bin/cruler.c:394 #, fuzzy msgid "Protractor" msgstr "Портретный" #: ../bin/cselect.c:688 msgid "Change Track Width" msgstr "Изменить ширину трека" #: ../bin/cselect.c:714 #, fuzzy msgid "Change Line Type" msgstr "Изменить слои" #: ../bin/cselect.c:739 msgid "Delete only works in Select Mode" msgstr "" #: ../bin/cselect.c:755 msgid "Delete Tracks" msgstr "Удалить треки" #: ../bin/cselect.c:862 msgid "Hide Tracks (Tunnel)" msgstr "Спрятать треки (тунель)" #: ../bin/cselect.c:882 #, fuzzy msgid "Bridge Tracks " msgstr "Трек Безье" #: ../bin/cselect.c:900 #, fuzzy msgid "Roadbed Tracks " msgstr "Вращать треки" #: ../bin/cselect.c:918 #, fuzzy msgid "Ties Tracks " msgstr "Тонкие треки" #: ../bin/cselect.c:956 ../bin/menu.c:1118 msgid "Move To Current Layer" msgstr "Переместить на текущий слой" #: ../bin/cselect.c:1010 ../bin/menu.c:1303 msgid "Clear Elevations" msgstr "Очистить высоты" #: ../bin/cselect.c:1056 msgid "Add Elevations" msgstr "Добавить высоты" #: ../bin/cselect.c:1072 msgid "Refresh Compound" msgstr "" #: ../bin/cselect.c:1471 msgid "Cornu too tight - it was deleted" msgstr "" #: ../bin/cselect.c:1526 msgid "Move To Join" msgstr "" #: ../bin/cselect.c:1735 msgid "Drag to move selected tracks - Shift+Ctrl+Arrow micro-steps the move" msgstr "" #: ../bin/cselect.c:1756 ../bin/cselect.c:1890 ../bin/cselect.c:2295 msgid "Move Tracks" msgstr "Переместить треки" #: ../bin/cselect.c:1939 #, fuzzy msgid "Align: Click on a selected object to be aligned" msgstr "Скопировать выбранные объекты в буфер обмена" #: ../bin/cselect.c:1978 msgid "Drag to rotate selected tracks, Shift+RightClick for QuickRotate Menu" msgstr "" #: ../bin/cselect.c:1994 ../bin/cselect.c:2370 msgid "Rotate Tracks" msgstr "Вращать треки" #: ../bin/cselect.c:2009 msgid "Center of Rotation snapped to Turntable center" msgstr "" #: ../bin/cselect.c:2055 ../bin/cselect.c:2090 #, c-format msgid "Angle %0.3f" msgstr "" #: ../bin/cselect.c:2154 #, fuzzy, c-format msgid "Angle %0.3f #%ld" msgstr "Угол = %0.3f (%s)" #: ../bin/cselect.c:2156 #, fuzzy, c-format msgid "Angle %0.3f %s" msgstr "Угол = %0.3f (%s)" #: ../bin/cselect.c:2162 msgid "Origin Set. Drag away to set start angle" msgstr "" #: ../bin/cselect.c:2177 msgid "Align: Click on the 2nd unselected object" msgstr "" #: ../bin/cselect.c:2307 msgid "In module layer:" msgstr "" #: ../bin/cselect.c:2315 #, fuzzy msgid "Frozen Layer:" msgstr "Заморожен" #: ../bin/cselect.c:2319 #, fuzzy msgid "Not found" msgstr "Число точек" #: ../bin/cselect.c:2356 msgid "Multiple Selected" msgstr "" #: ../bin/cselect.c:2383 msgid "Toggle Detail" msgstr "" #: ../bin/cselect.c:2399 msgid "Toggle Label" msgstr "" #: ../bin/cselect.c:2572 #, fuzzy msgid "Elevation description" msgstr "Описание Левая" #: ../bin/cselect.c:2579 #, fuzzy msgid "Hidden description - 's' to Show, 'd' Details" msgstr "Показать подпись" #: ../bin/cselect.c:2582 #, fuzzy msgid "Shown description - 'h' to Hide" msgstr "Показать подпись" #: ../bin/cselect.c:2590 msgid "Select and drag a description" msgstr "Выберите и переместите подпись" #: ../bin/cselect.c:2632 msgid "Hidden Label - Drag to reveal" msgstr "" #: ../bin/cselect.c:2634 #, fuzzy msgid "Drag label" msgstr "Тащите, чтобы разместить" #: ../bin/cselect.c:2644 msgid "Move Label" msgstr "Переместить подпись" #: ../bin/cselect.c:2683 msgid "To Hide, use Context Menu" msgstr "" #: ../bin/cselect.c:2717 ../bin/cselect.c:3715 #, fuzzy msgid "Show/Hide Description" msgstr "Показать подпись" #: ../bin/cselect.c:2720 #, fuzzy msgid "Toggle Detailed Description" msgstr "Переместить описание" #: ../bin/cselect.c:2804 msgid "Drag to mark mirror line" msgstr "Тащите, чтобы отметить ось зеркала" #: ../bin/cselect.c:2815 #, c-format msgid "Angle %0.2f" msgstr "Угол %0.2f" #: ../bin/cselect.c:2818 msgid "Flip Tracks" msgstr "Отзеркалить треки" #: ../bin/cselect.c:3014 ../bin/cselect.c:3215 msgid "Track is in Frozen Layer" msgstr "" #: ../bin/cselect.c:3188 #, fuzzy msgid "Select track" msgstr "Выберите треки" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:439 #: ../bin/cselect.c:3627 ../bin/dcar.c:1765 ../bin/doption.c:245 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1190 msgid "Select" msgstr "Выбрать" #: ../bin/cselect.c:3654 ../bin/cselect.c:3683 ../bin/menu.c:932 msgid "Undo" msgstr "Отменить" #: ../bin/cselect.c:3655 ../bin/cselect.c:3684 ../bin/menu.c:934 msgid "Redo" msgstr "Повторить" #: ../bin/cselect.c:3665 ../bin/cselect.c:3688 ../bin/draw.c:3500 msgid "Zoom to extents - 'e'" msgstr "" #: ../bin/cselect.c:3667 ../bin/draw.c:3522 ../bin/menu.c:1163 msgid "&Zoom" msgstr "Масштаб" #: ../bin/cselect.c:3670 ../bin/draw.c:3520 msgid "Pan to Origin - 'o'/'0'" msgstr "" #: ../bin/cselect.c:3672 ../bin/cselect.c:3692 msgid "Pan Center Here - 'c'" msgstr "" #: ../bin/cselect.c:3677 ../bin/menu.c:977 ../bin/menu.c:1126 msgid "Select Current Layer" msgstr "Сохранить текущий слой" #: ../bin/cselect.c:3690 #, fuzzy msgid "Zoom to selected - 's'" msgstr "выбранные" #: ../bin/cselect.c:3696 ../bin/menu.c:979 msgid "Deselect All" msgstr "Сбросить выделение" #: ../bin/cselect.c:3699 #, fuzzy msgid "Properties -'?'" msgstr "Свойства" #: ../bin/cselect.c:3701 #, fuzzy msgid "Modify/Activate Track" msgstr "Изменить трек" #: ../bin/cselect.c:3704 ../bin/menu.c:965 #, fuzzy msgid "Cut" msgstr "Вырезать" #: ../bin/cselect.c:3705 ../bin/menu.c:967 msgid "Copy" msgstr "Копировать" #: ../bin/cselect.c:3706 ../bin/fileio.c:1730 ../bin/menu.c:969 msgid "Paste" msgstr "Вставить" #: ../bin/cselect.c:3707 ../bin/menu.c:971 #, fuzzy msgid "Clone" msgstr "Закрыть" #: ../bin/cselect.c:3709 #, fuzzy msgid "Rotate..." msgstr "Повернуть" #: ../bin/cselect.c:3711 msgid "Align" msgstr "Выравнивание" #: ../bin/cselect.c:3717 ../bin/menu.c:1142 msgid "Ties/NoTies" msgstr "" #: ../bin/cselect.c:3719 msgid "Hide/NoHide" msgstr "" #: ../bin/cselect.c:3721 msgid "Bridge/NoBridge" msgstr "" #: ../bin/cselect.c:3723 msgid "Roadbed/NoRoadbed" msgstr "" #: ../bin/cselect.c:3725 msgid "NoTies/Ties" msgstr "" #: ../bin/cselect.c:3727 msgid "Thickness..." msgstr "" #: ../bin/cselect.c:3728 ../bin/menu.c:1150 msgid "Thin Tracks" msgstr "Тонкие треки" #: ../bin/cselect.c:3730 ../bin/menu.c:1152 msgid "Medium Tracks" msgstr "Средние треки" #: ../bin/cselect.c:3732 ../bin/menu.c:1154 msgid "Thick Tracks" msgstr "Толстые треки" #: ../bin/cselect.c:3741 msgid "Dash-Dotted Line" msgstr "" #: ../bin/cselect.c:3743 msgid "Dash-Dot-Dotted Line" msgstr "" #: ../bin/cselect.c:3746 #, fuzzy msgid "Move To Front" msgstr "Переместить" #: ../bin/cselect.c:3747 #, fuzzy msgid "Move To Back" msgstr "Переместить треки" #: ../bin/cselect.c:3749 #, fuzzy msgid "Group" msgstr "Группировать" #: ../bin/cselect.c:3750 #, fuzzy msgid "UnGroup" msgstr "Разгруппировать" #: ../bin/cselect.c:3796 msgid "Move Description" msgstr "Переместить описание" #: ../bin/cselect.c:3804 ../bin/menu.c:294 ../bin/menu.c:986 msgid "Move" msgstr "Переместить" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:484 #: ../bin/cselect.c:3807 ../bin/menu.c:271 ../bin/menu.c:988 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1280 msgid "Rotate" msgstr "Повернуть" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:485 #: ../bin/cselect.c:3810 ../bin/dcar.c:2327 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1282 msgid "Flip" msgstr "Отразить" #: ../bin/csensor.c:214 msgid "Change Sensor" msgstr "Изменить сенсор" #: ../bin/csensor.c:261 ../bin/csensor.c:599 msgid "Sensor" msgstr "Сенсор" #: ../bin/csensor.c:407 msgid "Create Sensor" msgstr "Создать сенсор" #: ../bin/csensor.c:410 msgid "Modify Sensor" msgstr "Изменить сенсор" #: ../bin/csensor.c:445 msgid "Edit sensor" msgstr "Изменить сенсор" #: ../bin/csensor.c:483 msgid "Place sensor" msgstr "Установить сенсор" #: ../bin/csnap.c:530 msgid "Horz" msgstr "Столбцы" #: ../bin/csnap.c:532 msgid "Spacing" msgstr "Размер" #: ../bin/csnap.c:534 msgid "Divisions" msgstr "Ячеек" #: ../bin/csnap.c:537 msgid "Enable" msgstr "Включено" #: ../bin/csnap.c:538 msgid "Vert" msgstr "Строки" #: ../bin/csnap.c:547 ../bin/dease.c:78 msgid "X" msgstr "Смещ." #: ../bin/csnap.c:551 msgid "A" msgstr "" #: ../bin/csnap.c:554 msgid "Show" msgstr "Показывать" #: ../bin/csnap.c:815 msgid "Change Grid..." msgstr "Изменить сетку..." #: ../bin/csplit.c:45 msgid "Set Block Gaps" msgstr "" #: ../bin/csplit.c:137 #, fuzzy msgid "Select track and position for split" msgstr "Выберите трек для разделения" #: ../bin/csplit.c:161 msgid "Can't Split that Track Object" msgstr "" #: ../bin/csplit.c:169 ../bin/csplit.c:182 ../bin/csplit.c:505 msgid "Split Track" msgstr "Разделить трек" #: ../bin/csplit.c:178 ../bin/csplit.c:322 ../bin/csplit.c:410 msgid "Can't Split that Draw Object" msgstr "" #: ../bin/csplit.c:188 #, fuzzy msgid "No Track to Split" msgstr "Выберите трек для разделения" #: ../bin/csplit.c:203 ../bin/dbench.c:65 ../bin/dbench.c:77 msgid "Left" msgstr "Слева" #: ../bin/csplit.c:205 ../bin/dbench.c:66 ../bin/dbench.c:76 msgid "Right" msgstr "Справа" #: ../bin/csplit.c:207 ../bin/csplit.c:216 msgid "Both" msgstr "Оба" #: ../bin/csplit.c:212 msgid "Top" msgstr "Сверху" #: ../bin/csplit.c:214 msgid "Bottom" msgstr "Снизу" #: ../bin/csplit.c:307 #, fuzzy msgid "Select draw to split" msgstr "Выберите трек для разделения" #: ../bin/csplit.c:326 ../bin/csplit.c:508 #, fuzzy msgid "Split Draw" msgstr "Разделить трек" #: ../bin/csplit.c:332 #, fuzzy msgid "No Draw to Split" msgstr "Тащите, чтобы разместить" #: ../bin/csplit.c:371 #, fuzzy msgid "Select the draw object to Trim to" msgstr "Переместить выбранные объекты наверх" #: ../bin/csplit.c:387 msgid "Can't Trim with a Track" msgstr "" #: ../bin/csplit.c:392 msgid "Select an intersecting draw object to Trim" msgstr "" #: ../bin/csplit.c:397 #, fuzzy msgid "No Draw to Trim with" msgstr "Тащите, чтобы разместить" #: ../bin/csplit.c:404 #, fuzzy msgid "Can't Split a track object" msgstr "Разделить трек" #: ../bin/csplit.c:432 ../bin/csplit.c:511 #, fuzzy msgid "Trim Draw" msgstr "Цвет" #: ../bin/csplit.c:437 msgid "Select another draw object to Trim, or Space to Deselect" msgstr "" #: ../bin/csplit.c:504 #, fuzzy msgid "Split" msgstr "Разделить трек" #: ../bin/csignal.c:239 msgid "Number Of Heads" msgstr "Кол-во головок" #: ../bin/csignal.c:279 msgid "Change Signal" msgstr "Изменить сигнал" #: ../bin/csignal.c:314 #, fuzzy, c-format msgid "(%d [%s]): Layer=%u, %d heads at %0.3f,%0.3f A%0.3f" msgstr "(%d [%s]): Слой=%d, по %0.3f,%0.3f" #: ../bin/csignal.c:325 ../bin/csignal.c:931 msgid "Signal" msgstr "Сигнал" #: ../bin/csignal.c:518 msgid "Number of Heads" msgstr "Кол-во головок" #: ../bin/csignal.c:523 msgid "Edit Aspect" msgstr "" #: ../bin/csignal.c:525 msgid "Add Aspect" msgstr "" #: ../bin/csignal.c:527 msgid "Delete Aspect" msgstr "" #: ../bin/csignal.c:540 msgid "Aspect Index" msgstr "" #: ../bin/csignal.c:555 msgid "Create Signal" msgstr "Создать сигнал" #: ../bin/csignal.c:560 msgid "Modify Signal" msgstr "Изменить сигнал" #: ../bin/csignal.c:677 msgid "Edit aspect" msgstr "" #: ../bin/csignal.c:724 #, c-format msgid "Are you sure you want to delete the %d aspect(s)" msgstr "" #: ../bin/csignal.c:747 msgid "Edit signal" msgstr "" #: ../bin/csignal.c:811 msgid "Place base of signal" msgstr "" #: ../bin/csignal.c:819 msgid "Drag to orient signal" msgstr "" #: ../bin/cstraigh.c:77 msgid "Place 1st endpoint of straight track, snap to unconnected endpoint" msgstr "" #: ../bin/cstraigh.c:105 msgid "Drag to place 2nd end point" msgstr "" #: ../bin/cstraigh.c:151 #, c-format msgid "Straight Track Length=%s Angle=%0.3f" msgstr "Длина прямого трека=%s Угол=%0.3f" #: ../bin/cstraigh.c:204 ../bin/tstraigh.c:245 msgid "Straight Track" msgstr "Прямой трек" #: ../bin/cstruct.c:67 ../bin/cturnout.c:86 ../bin/doption.c:93 #: ../bin/doption.c:250 msgid "Hide" msgstr "Скрыть" #: ../bin/cstruct.c:505 ../bin/cstruct.c:535 msgid "Pier Number" msgstr "" #: ../bin/cstruct.c:627 #, c-format msgid "Scale %d:1" msgstr "Масштаб %d:1" #: ../bin/cstruct.c:629 #, c-format msgid "Width %s" msgstr "Ширина %s" #: ../bin/cstruct.c:631 #, c-format msgid "Height %s" msgstr "Высота %s" #: ../bin/cstruct.c:779 msgid "Place Structure" msgstr "" #: ../bin/cstruct.c:851 ../bin/cstruct.c:904 ../bin/drawgeom.c:304 #, fuzzy msgid "+Alt for Magnetic Snap" msgstr "Прилипать к сетке" #: ../bin/cstruct.c:853 ../bin/cstruct.c:906 ../bin/drawgeom.c:306 #, fuzzy msgid "+Alt to inhibit Magnetic Snap" msgstr "Прилипать к сетке" #: ../bin/cstruct.c:888 msgid "Drag to place" msgstr "Тащите, чтобы разместить" #: ../bin/cstruct.c:921 msgid "Drag to rotate" msgstr "Тащите, чтобы повернуть" #: ../bin/cstruct.c:952 ../bin/cstruct.c:1222 ../bin/cturnout.c:2812 #: ../bin/cturnout.c:2871 ../bin/cturnout.c:3015 ../bin/cturnout.c:3162 msgid "" "Left-Drag to place, Ctrl+Left-Drag or Right-Drag to Rotate, Space or Enter " "to accept, Esc to Cancel" msgstr "" #: ../bin/cstruct.c:1031 ../bin/cturnout.c:2963 ../bin/param.c:3013 msgid "Close" msgstr "Закрыть" #: ../bin/cstruct.c:1049 msgid "Select Structure and then drag to place" msgstr "" #: ../bin/cstruct.c:1091 msgid "" "Left drag to move, right drag to rotate, or press Return or click Ok to " "finalize" msgstr "" #: ../bin/cstruct.c:1184 ../bin/cturnout.c:3127 #, c-format msgid "Place %s and draw into position" msgstr "" #: ../bin/cswitchmotor.c:92 ../bin/cswitchmotor.c:111 #: ../bin/cswitchmotor.c:231 msgid "Point Sense" msgstr "" #: ../bin/cswitchmotor.c:112 msgid "Turnout Number" msgstr "" #: ../bin/cswitchmotor.c:299 msgid "Change Switch Motor" msgstr "" #: ../bin/cswitchmotor.c:369 msgid "Switch motor" msgstr "" #: ../bin/cswitchmotor.c:499 #, c-format msgid "ResolveSwitchmotor: Turnout T%d: T%d doesn't exist" msgstr "" #: ../bin/cswitchmotor.c:570 ../bin/cswitchmotor.c:746 msgid "Switch motor must have a name!" msgstr "" #: ../bin/cswitchmotor.c:574 msgid "Create Switch Motor" msgstr "" #: ../bin/cswitchmotor.c:608 msgid "Create switch motor" msgstr "" #: ../bin/cswitchmotor.c:624 ../bin/cswitchmotor.c:655 #: ../bin/cswitchmotor.c:687 msgid "Select a turnout" msgstr "" #: ../bin/cswitchmotor.c:632 msgid "Not a turnout!" msgstr "" #: ../bin/cswitchmotor.c:664 ../bin/cswitchmotor.c:695 msgid "Not a switch motor!" msgstr "" #: ../bin/cswitchmotor.c:700 #, c-format msgid "Really delete switch motor %s?" msgstr "" #: ../bin/cswitchmotor.c:702 msgid "Delete Switch Motor" msgstr "" #: ../bin/cswitchmotor.c:750 msgid "Modify Switch Motor" msgstr "" #: ../bin/cswitchmotor.c:776 msgid "Edit switch motor" msgstr "" #: ../bin/cswitchmotor.c:782 #, c-format msgid "Edit switch motor %d" msgstr "" #: ../bin/cswitchmotor.c:889 msgid "Switch Motor" msgstr "" #: ../bin/cswitchmotor.c:903 #, c-format msgid "Deleting Switch Motor %s" msgstr "" #: ../bin/ctext.c:194 ../bin/ctext.c:242 msgid "Create Text" msgstr "Создать текст" #: ../bin/ctext.c:277 msgid "Fonts..." msgstr "Шрифты..." #: ../bin/ctodesgn.c:139 msgid "Frog #" msgstr "Стрелка #" #: ../bin/ctodesgn.c:139 msgid "Degrees" msgstr "Градусы" #: ../bin/ctodesgn.c:140 msgid "Dual Path" msgstr "" #: ../bin/ctodesgn.c:140 msgid "Quad Path" msgstr "" #: ../bin/ctodesgn.c:182 ../bin/ctodesgn.c:183 ../bin/ctodesgn.c:184 #: ../bin/ctodesgn.c:185 ../bin/ctodesgn.c:244 ../bin/ctodesgn.c:270 #: ../bin/ctodesgn.c:272 ../bin/ctodesgn.c:316 ../bin/ctodesgn.c:319 #: ../bin/ctodesgn.c:350 ../bin/ctodesgn.c:351 ../bin/ctodesgn.c:395 #: ../bin/ctodesgn.c:398 ../bin/ctodesgn.c:428 ../bin/ctodesgn.c:430 #: ../bin/ctodesgn.c:477 ../bin/ctodesgn.c:481 ../bin/ctodesgn.c:484 #: ../bin/ctodesgn.c:742 msgid "Offset" msgstr "Смещение" #: ../bin/ctodesgn.c:203 ../bin/ctodesgn.c:3204 ../bin/ctodesgn.c:3205 msgid "Left Description" msgstr "Описание Левая" #: ../bin/ctodesgn.c:204 ../bin/ctodesgn.c:207 msgid " #" msgstr " #" #: ../bin/ctodesgn.c:206 ../bin/ctodesgn.c:3203 msgid "Right Description" msgstr "Описание Правая" #: ../bin/ctodesgn.c:208 msgid "Roadbed Width" msgstr "Ширина полотна" #: ../bin/ctodesgn.c:212 ../bin/denum.c:52 msgid "Print Setup" msgstr "Настройки печати" #: ../bin/ctodesgn.c:242 msgid "Diverging Length" msgstr "Отклонение длины" #: ../bin/ctodesgn.c:243 msgid "Diverging Angle" msgstr "Отклонение угла" #: ../bin/ctodesgn.c:244 msgid "Diverging Offset" msgstr "Отклонение смещения" #: ../bin/ctodesgn.c:245 msgid "Overall Length" msgstr "" #: ../bin/ctodesgn.c:257 msgid "Regular Turnout" msgstr "Обычная стрелка" #: ../bin/ctodesgn.c:268 ../bin/ctodesgn.c:314 msgid "Inner Length" msgstr "Внутренняя длина" #: ../bin/ctodesgn.c:269 ../bin/ctodesgn.c:315 msgid "Inner Angle" msgstr "Внутренний угол" #: ../bin/ctodesgn.c:270 ../bin/ctodesgn.c:316 msgid "Inner Offset" msgstr "Внутреннее смещение" #: ../bin/ctodesgn.c:271 ../bin/ctodesgn.c:318 msgid "Outer Angle" msgstr "Внешний угол" #: ../bin/ctodesgn.c:272 ../bin/ctodesgn.c:319 msgid "Outer Offset" msgstr "Внешнее смещение" #: ../bin/ctodesgn.c:273 ../bin/ctodesgn.c:321 msgid "Outer Length" msgstr "Внешняя длина" #: ../bin/ctodesgn.c:302 msgid "Curved Turnout" msgstr "" #: ../bin/ctodesgn.c:317 #, fuzzy msgid "Inner Radius" msgstr "Мин. радиус" #: ../bin/ctodesgn.c:320 #, fuzzy msgid "Outer Radius" msgstr "Радиус" #: ../bin/ctodesgn.c:322 ../bin/ctodesgn.c:402 ../bin/ctodesgn.c:489 #, fuzzy msgid "Toe Radius" msgstr "Радиус" #: ../bin/ctodesgn.c:323 ../bin/ctodesgn.c:401 #, fuzzy msgid "Toe Length" msgstr "Общая длина" #: ../bin/ctodesgn.c:336 #, fuzzy msgid "Cornu Curved Turnout" msgstr "Добавить изогнутый трек" #: ../bin/ctodesgn.c:348 ../bin/ctodesgn.c:393 ../bin/ctodesgn.c:426 #: ../bin/ctodesgn.c:475 msgid "Left Length" msgstr "Длина слева" #: ../bin/ctodesgn.c:349 ../bin/ctodesgn.c:394 ../bin/ctodesgn.c:427 #: ../bin/ctodesgn.c:476 msgid "Left Angle" msgstr "Угол слева" #: ../bin/ctodesgn.c:350 ../bin/ctodesgn.c:395 ../bin/ctodesgn.c:428 #: ../bin/ctodesgn.c:477 msgid "Left Offset" msgstr "Смещение слева" #: ../bin/ctodesgn.c:351 ../bin/ctodesgn.c:398 ../bin/ctodesgn.c:430 #: ../bin/ctodesgn.c:484 msgid "Right Offset" msgstr "Смещение справа" #: ../bin/ctodesgn.c:352 ../bin/ctodesgn.c:399 ../bin/ctodesgn.c:431 #: ../bin/ctodesgn.c:485 msgid "Right Angle" msgstr "Угол справа" #: ../bin/ctodesgn.c:353 ../bin/ctodesgn.c:400 ../bin/ctodesgn.c:432 #: ../bin/ctodesgn.c:486 msgid "Right Length" msgstr "Длина справа" #: ../bin/ctodesgn.c:381 msgid "Wye Turnout" msgstr "" #: ../bin/ctodesgn.c:396 ../bin/ctodesgn.c:478 #, fuzzy msgid "Left Radius" msgstr "Радиус" #: ../bin/ctodesgn.c:397 ../bin/ctodesgn.c:483 #, fuzzy msgid "Right Radius" msgstr "Мин. радиус" #: ../bin/ctodesgn.c:414 msgid "Cornu Wye Turnout" msgstr "" #: ../bin/ctodesgn.c:463 msgid "3-way Turnout" msgstr "" #: ../bin/ctodesgn.c:479 #, fuzzy msgid "Center Length" msgstr "Внутренняя длина" #: ../bin/ctodesgn.c:480 #, fuzzy msgid "Center Angle" msgstr "Внутренний угол" #: ../bin/ctodesgn.c:481 ../bin/dcar.c:2348 #, fuzzy msgid "Center Offset" msgstr "Внутреннее смещение" #: ../bin/ctodesgn.c:482 #, fuzzy msgid "Center Radius" msgstr "Радиус окружности" #: ../bin/ctodesgn.c:487 #, fuzzy msgid "Toe Length Left" msgstr "Общая длина" #: ../bin/ctodesgn.c:488 #, fuzzy msgid "Toe Length Right" msgstr "Общая длина" #: ../bin/ctodesgn.c:502 msgid "Cornu 3-way Turnout" msgstr "" #: ../bin/ctodesgn.c:527 msgid "Crossing" msgstr "Перекрёсток" #: ../bin/ctodesgn.c:552 msgid "Single Slipswitch" msgstr "" #: ../bin/ctodesgn.c:587 msgid "Double Slipswitch" msgstr "" #: ../bin/ctodesgn.c:612 msgid "Right Crossover" msgstr "" #: ../bin/ctodesgn.c:638 msgid "Left Crossover" msgstr "" #: ../bin/ctodesgn.c:663 msgid "Double Crossover" msgstr "" #: ../bin/ctodesgn.c:685 msgid "Straight Section" msgstr "Прямое выделение" #: ../bin/ctodesgn.c:697 msgid "Angle (Degrees)" msgstr "Угол (градусы)" #: ../bin/ctodesgn.c:708 msgid "Curved Section" msgstr "" #: ../bin/ctodesgn.c:731 msgid "Bumper Section" msgstr "" #: ../bin/ctodesgn.c:742 ../bin/denum.c:124 ../bin/denum.c:193 #: ../bin/denum.c:230 ../bin/denum.c:231 msgid "Count" msgstr "Кол-во" #: ../bin/ctodesgn.c:743 msgid "Radius1" msgstr "Радиус1" #: ../bin/ctodesgn.c:744 msgid "Radius2" msgstr "Радиус2" #: ../bin/ctodesgn.c:827 msgid "Turntable Section" msgstr "" #: ../bin/ctodesgn.c:2777 #, c-format msgid "%s Designer" msgstr "" #: ../bin/ctodesgn.c:2780 #, c-format msgid "%s %d x %d (of %d x %d)" msgstr "" #: ../bin/ctodesgn.c:2780 msgid "Page" msgstr "Страница" #: ../bin/ctodesgn.c:2788 msgid "Frog Number" msgstr "Номер стрелки" #: ../bin/ctodesgn.c:3147 msgid "Turnout Designer" msgstr "Редактор стрелок" #: ../bin/ctodesgn.c:3160 #, c-format msgid "%s %s Designer" msgstr "" #: ../bin/ctrain.c:179 ../bin/dcar.c:2360 ../bin/dcar.c:4694 #: ../bin/dcar.c:4700 msgid "Index" msgstr "№" #: ../bin/ctrain.c:185 #, fuzzy msgid "Report Marks" msgstr "Метки" #: ../bin/ctrain.c:273 msgid "Car" msgstr "Машина" #: ../bin/ctrain.c:728 msgid "Follow" msgstr "Следовать" #: ../bin/ctrain.c:729 msgid "Auto Reverse" msgstr "Авторазворот" #: ../bin/ctrain.c:748 ../bin/dcar.c:5686 msgid "Find" msgstr "Найти" #: ../bin/ctrain.c:754 ../bin/ctrain.c:1011 ../bin/ctrain.c:1324 msgid "Forward" msgstr "Вперёд" #: ../bin/ctrain.c:756 ../bin/ctrain.c:3235 ../bin/dcar.c:5093 #: ../bin/dcar.c:5103 ../bin/dcar.c:5225 ../bin/fileio.c:224 ../bin/macro.c:64 #: ../bin/track.c:1366 msgid "Stop" msgstr "Стоп" #: ../bin/ctrain.c:952 ../bin/ctrain.c:981 msgid "Crashed" msgstr "Разрушено" #: ../bin/ctrain.c:954 msgid "Not on Track" msgstr "Не на треке" #: ../bin/ctrain.c:958 msgid "Trains Paused" msgstr "Поезда остановлены" #: ../bin/ctrain.c:960 msgid "Running" msgstr "Запущено" #: ../bin/ctrain.c:965 msgid "End of Track" msgstr "Конец трека" #: ../bin/ctrain.c:969 msgid "Open Turnout" msgstr "" #: ../bin/ctrain.c:973 msgid "Manual Stop" msgstr "Ручная остановка" #: ../bin/ctrain.c:977 msgid "No Room" msgstr "Нет комнат" #: ../bin/ctrain.c:985 msgid "Unknown Status" msgstr "Неизвестный статус" #: ../bin/ctrain.c:995 msgid "No trains" msgstr "Нет поездов" #: ../bin/ctrain.c:1375 msgid "Train Control XXX" msgstr "Управление поездом XXX" #: ../bin/ctrain.c:1376 #, c-format msgid "Train Control %d" msgstr "Управление поездом %d" #: ../bin/ctrain.c:1378 msgid "Train Control" msgstr "Управление поездом" #: ../bin/ctrain.c:3198 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:156 msgid "Run Trains" msgstr "Запустить поезда" #: ../bin/ctrain.c:3217 msgid "Uncouple" msgstr "" #: ../bin/ctrain.c:3219 msgid "Flip Car" msgstr "Развернуть машину" #: ../bin/ctrain.c:3222 #, fuzzy msgid "Clearance Lines On" msgstr "Создать линии" #: ../bin/ctrain.c:3225 #, fuzzy msgid "Clearance Lines Off" msgstr "Создать линии" #: ../bin/ctrain.c:3227 msgid "Flip Train" msgstr "Развернуть поезд" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:438 #: ../bin/ctrain.c:3229 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1188 msgid "Describe" msgstr "Подпись" #: ../bin/ctrain.c:3231 msgid "MU Master" msgstr "" #: ../bin/ctrain.c:3234 msgid "Change Direction" msgstr "Изменить направление" #: ../bin/ctrain.c:3238 msgid "Remove Car" msgstr "Удалить машину" #: ../bin/ctrain.c:3241 msgid "Remove Train" msgstr "Удалить поезд" #: ../bin/cturnout.c:97 ../bin/dcar.c:2382 ../bin/dcar.c:2386 msgid "New" msgstr "Создать" #: ../bin/cturnout.c:371 ../bin/cturnout.c:376 #, c-format msgid "CheckPath: Turnout path[%d] %d is not a track segment" msgstr "" #: ../bin/cturnout.c:385 #, c-format msgid "" "CheckPath: Turnout path[%d] %d-%d not connected: %0.3f P0(%f,%f) P1(%f,%f)" msgstr "" #: ../bin/cturnout.c:437 msgid "Unknown special case" msgstr "" #: ../bin/cturnout.c:564 msgid "Connect Adjustable Tracks" msgstr "" #: ../bin/cturnout.c:1030 msgid "splitTurnout: can't find segment" msgstr "" #: ../bin/cturnout.c:1511 ../bin/track.c:2380 ../bin/track.c:2502 #: ../bin/tstraigh.c:838 msgid "Drag to change track length" msgstr "" #: ../bin/cturnout.c:1524 #, c-format msgid "Length=%s" msgstr "Длина=%s" #: ../bin/cturnout.c:1815 #, c-format msgid "Turnout %d Path: %s" msgstr "" #: ../bin/cturnout.c:2389 #, c-format msgid "%d connections, max distance %0.3f (%s)" msgstr "" #: ../bin/cturnout.c:2394 #, c-format msgid "0 connections (%s)" msgstr "0 соединений (%s)" #: ../bin/cturnout.c:2433 msgid "Place New Turnout" msgstr "" #: ../bin/cturnout.c:2861 #, c-format msgid "Angle = %0.3f (%s)" msgstr "Угол = %0.3f (%s)" #: ../bin/cturnout.c:2962 msgid "Add Fixed-Track" msgstr "" #: ../bin/cturnout.c:2981 msgid "Pick turnout and active End Point, then place on the layout" msgstr "" #: ../bin/cturnout.c:3190 #, fuzzy msgid "Fixed-Track" msgstr "Изогнутый трек" #: ../bin/cturntbl.c:49 ../bin/cturntbl.c:275 ../bin/cturntbl.c:1029 #: ../bin/cturntbl.c:1044 msgid "Diameter" msgstr "Диаметр" #: ../bin/cturntbl.c:276 msgid "# EndPt" msgstr "# КонТчк" #: ../bin/cturntbl.c:316 #, c-format msgid "Turntable(%d): Layer=%d Center=[%s %s] Diameter=%s #EP=%d" msgstr "Разворот(%d): Слой=%d Центр=[%s %s] Диаметр=%s #EP=%d" #: ../bin/cturntbl.c:335 ../bin/cturntbl.c:454 msgid "Turntable" msgstr "Разворотный рельс" #: ../bin/cturntbl.c:670 msgid "Drag to create stall track" msgstr "" #: ../bin/cturntbl.c:728 #, fuzzy msgid "Connect Turntable Tracks" msgstr "Соединить два трека" #: ../bin/cturntbl.c:1058 msgid "Create Turntable" msgstr "Создать разворотный рельс" #: ../bin/cturntbl.c:1090 #, fuzzy msgid "Custom Turntable" msgstr "Создать разворотный рельс" #: ../bin/cundo.c:266 msgid "Undo Trace" msgstr "Отменить трассировку" #: ../bin/cundo.c:741 #, c-format msgid "Undo: %s" msgstr "Отменить: %s" #: ../bin/cundo.c:744 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:168 msgid "Undo last command" msgstr "Отменить последнюю команду" #: ../bin/cundo.c:749 #, c-format msgid "Redo: %s" msgstr "Повторить: %s" #: ../bin/cundo.c:752 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:129 msgid "Redo last undo" msgstr "Повторить последнюю отмену" #: ../bin/custom.c:148 #, c-format msgid "%s Turnout Designer" msgstr "%s Редактор стрелок" #: ../bin/custom.c:152 #, c-format msgid "%s Version %s" msgstr "%s Версия %s" #: ../bin/custom.c:156 #, c-format msgid "" "All %s Files (*.xtc,*.xtce)|*.xtc;*.xtce|%s Trackplan (*.xtc)|*.xtc|%s " "Extended Trackplan (*.xtce)|*.xtce|All Files (*)|*" msgstr "" #: ../bin/custom.c:166 #, c-format msgid "" "%s Trackplan (*.xtc)|*.xtc|%s Extended Trackplan (*.xtce)|*.xtce|All Files " "(*)|*" msgstr "" #: ../bin/custom.c:174 #, fuzzy, c-format msgid "All Files (*)|*" msgstr "Все файлы" #: ../bin/custom.c:178 #, fuzzy, c-format msgid "%s Import Files (*.xti)|*.xti" msgstr "%s Импорт файлов|*.%sti" #: ../bin/custom.c:182 #, fuzzy msgid "Data Exchange Format Files (*.dxf)|*.dxf" msgstr "Файлы формат обмена данными|*.dxf" #: ../bin/custom.c:186 msgid "Scalable Vector Graphics Format Files (*.svg)|*.svg" msgstr "" #: ../bin/custom.c:190 #, fuzzy, c-format msgid "%s Record Files (*.xtr)|*.xtr" msgstr "%s Файлы записей|*.%str" #: ../bin/custom.c:194 #, fuzzy, c-format msgid "%s Note Files (*.not)|*.not" msgstr "%s Файлы заметок|*.not" #: ../bin/custom.c:198 #, fuzzy, c-format msgid "%s Log Files (*.log)|*.log" msgstr "%s Файлы логов|*.log" #: ../bin/custom.c:202 #, fuzzy, c-format msgid "%s PartsList Files (*.txt)|*.txt" msgstr "%s Файлы запчастей|*.txt" #: ../bin/dbench.c:38 msgid " L-Girder" msgstr "L-профиль" #: ../bin/dbench.c:38 msgid " T-Girder" msgstr "T-профиль" #: ../bin/dbench.c:61 msgid "On Edge" msgstr "На ребро" #: ../bin/dbench.c:62 msgid "Flat" msgstr "Плашмя" #: ../bin/dbench.c:67 msgid "Left-Down" msgstr "Слева-снизу" #: ../bin/dbench.c:68 msgid "Right-Down" msgstr "Справа-снизу" #: ../bin/dbench.c:69 msgid "Left-Up" msgstr "Слева-сверху" #: ../bin/dbench.c:70 msgid "Right-Up" msgstr "Справа-сверху" #: ../bin/dbench.c:71 msgid "Left-Inverted" msgstr "Слева-инвертировано" #: ../bin/dbench.c:72 msgid "Right-Inverted" msgstr "Справа-инверитровано" #: ../bin/dbench.c:78 msgid "Inverted" msgstr "Инвертировано" #: ../bin/dbench.c:147 #, c-format msgid "" "Bad BenchType for %s:\n" "%s" msgstr "" #: ../bin/dbitmap.c:150 #, fuzzy msgid "Drawing tracks to bitmap" msgstr "Печать изображения" #: ../bin/dbitmap.c:187 msgid "Drawn with " msgstr "" #: ../bin/dbitmap.c:229 msgid "Writing bitmap to file" msgstr "" #: ../bin/dbitmap.c:252 #, fuzzy msgid "Layout Titles" msgstr "Заголовок" #: ../bin/dbitmap.c:253 #, fuzzy msgid "Borders" msgstr "Граница" #: ../bin/dbitmap.c:254 #, fuzzy msgid "Centerline of Track" msgstr "Добавить круглый трек" #: ../bin/dbitmap.c:255 #, fuzzy msgid "Background Image" msgstr "Конечный угол" #: ../bin/dbitmap.c:262 #, fuzzy msgid "Include " msgstr "№" #: ../bin/dbitmap.c:264 msgid "Resolution " msgstr "" #: ../bin/dbitmap.c:265 #, fuzzy msgid "dpi" msgstr " dpi" #: ../bin/dbitmap.c:266 #, fuzzy msgid "Bitmap Size " msgstr "Файлы изображений|*.xpm" #: ../bin/dbitmap.c:268 #, fuzzy msgid "99999 by 99999 pixels" msgstr "Рисунок : 99999 на 99999 пикселей" #: ../bin/dbitmap.c:269 #, fuzzy msgid "Approximate File Size " msgstr "Примерный размер файла: %0.0f" #: ../bin/dbitmap.c:271 #, fuzzy msgid "999.9Mb" msgstr "999.9" #: ../bin/dbitmap.c:317 #, fuzzy, c-format msgid "%ld by %ld pixels" msgstr "Изображение : %ld на %ld пикселей" #: ../bin/dbitmap.c:339 #, c-format msgid "%0.0f" msgstr "" #: ../bin/dbitmap.c:341 #, c-format msgid "%0.1fKb" msgstr "" #: ../bin/dbitmap.c:343 #, c-format msgid "%0.1fMb" msgstr "" #: ../bin/dbitmap.c:345 #, c-format msgid "%0.1fGb" msgstr "" #: ../bin/dbitmap.c:436 msgid "Save Bitmap" msgstr "Сохранить изображение" #: ../bin/dbitmap.c:437 msgid "" "Portable Network Graphics format (*.png)|*.png|JPEG format (*.jpg)|*.jpg" msgstr "" #: ../bin/dbitmap.c:472 #, fuzzy msgid "Export to bitmap" msgstr "Экспорт в изображение" #: ../bin/dcar.c:45 msgid "Truck" msgstr "" #: ../bin/dcar.c:45 msgid "Body" msgstr "Тело" #: ../bin/dcar.c:148 ../bin/dcar.c:2860 ../bin/dcar.c:2867 msgid "Unknown" msgstr "Неизвестно" #: ../bin/dcar.c:481 msgid "Diesel Loco" msgstr "Дизельный локомотив" #: ../bin/dcar.c:482 msgid "Steam Loco" msgstr "Паровоз" #: ../bin/dcar.c:483 msgid "Elect Loco" msgstr "Электровоз" #: ../bin/dcar.c:484 msgid "Freight Car" msgstr "Грузовой вагон" #: ../bin/dcar.c:485 msgid "Psngr Car" msgstr "Пассажирский вагон" #: ../bin/dcar.c:486 msgid "M-O-W" msgstr "" #: ../bin/dcar.c:487 msgid "Other" msgstr "Другие" #: ../bin/dcar.c:1237 ../bin/dcar.c:5478 msgid "N/A" msgstr "Неизвестно" #: ../bin/dcar.c:1238 ../bin/dcar.c:5483 msgid "Mint" msgstr "Новое" #: ../bin/dcar.c:1239 ../bin/dcar.c:5482 msgid "Excellent" msgstr "Превосходное" #: ../bin/dcar.c:1240 ../bin/dcar.c:5481 msgid "Good" msgstr "Хорошее" #: ../bin/dcar.c:1241 ../bin/dcar.c:5480 msgid "Fair" msgstr "Так себе" #: ../bin/dcar.c:1242 ../bin/dcar.c:5479 msgid "Poor" msgstr "Плохое" #: ../bin/dcar.c:1580 ../bin/dpricels.c:42 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:518 msgid "Item" msgstr "" #: ../bin/dcar.c:2282 ../wlib/mswlib/mswmisc.c:2057 msgid "Information" msgstr "Информация" #: ../bin/dcar.c:2282 msgid "Customize" msgstr "Внешний вид" #: ../bin/dcar.c:2296 msgid "Sequential" msgstr "" #: ../bin/dcar.c:2296 msgid "Repeated" msgstr "" #: ../bin/dcar.c:2307 ../bin/dcar.c:2309 ../bin/dcar.c:5838 msgid "Prototype" msgstr "Название" #: ../bin/dcar.c:2315 msgid "Part" msgstr "Запчасть" #: ../bin/dcar.c:2317 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:419 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:659 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:660 msgid "Part Number" msgstr "Номер запчасти" #: ../bin/dcar.c:2319 msgid "Loco?" msgstr "Поезд?" #: ../bin/dcar.c:2323 ../bin/dcar.c:4734 msgid "Import" msgstr "Импорт" #: ../bin/dcar.c:2330 msgid "Mode" msgstr "Режим" #: ../bin/dcar.c:2334 msgid "Road" msgstr "Дорога" #: ../bin/dcar.c:2336 msgid "Reporting Mark" msgstr "" #: ../bin/dcar.c:2338 msgid "Number" msgstr "Номер" #: ../bin/dcar.c:2342 msgid "Car Length" msgstr "Длина вагона" #: ../bin/dcar.c:2346 msgid "Truck Centers" msgstr "Колёсная база" #: ../bin/dcar.c:2350 msgid "Coupler Mount" msgstr "" #: ../bin/dcar.c:2352 msgid "Coupled Length" msgstr "" #: ../bin/dcar.c:2354 ../bin/dcar.c:4564 msgid "Coupler Length" msgstr "" #: ../bin/dcar.c:2362 msgid "Purchase Price" msgstr "Цена покупки" #: ../bin/dcar.c:2364 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:266 msgid "Current Price" msgstr "Текущая цена" #: ../bin/dcar.c:2366 ../bin/dcar.c:4696 ../bin/dcar.c:4702 msgid "Condition" msgstr "Состояние" #: ../bin/dcar.c:2368 msgid "Purchase Date" msgstr "Дата покупки" #: ../bin/dcar.c:2370 ../bin/dcar.c:4702 msgid "Service Date" msgstr "Дата обслуживания" #: ../bin/dcar.c:2372 msgid "Quantity" msgstr "Количество" #: ../bin/dcar.c:2374 msgid "Numbers" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:487 #: ../bin/dcar.c:2376 ../bin/dcar.c:4697 ../bin/trknote.c:594 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1286 msgid "Notes" msgstr "Заметки" #: ../bin/dcar.c:2383 msgid "Car Part" msgstr "" #: ../bin/dcar.c:2384 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:240 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:241 msgid "Car Prototype" msgstr "" #: ../bin/dcar.c:2776 ../bin/dcar.c:3143 msgid "Undecorated" msgstr "" #: ../bin/dcar.c:2849 ../bin/dcar.c:2855 ../bin/paramfilelist.c:458 msgid "Custom" msgstr "" #: ../bin/dcar.c:3049 msgid "Undecorated " msgstr "" #: ../bin/dcar.c:3298 #, c-format msgid "New %s Scale Car" msgstr "" #: ../bin/dcar.c:3299 ../bin/dcar.c:3308 ../bin/dcar.c:3318 ../bin/dcar.c:4598 #: ../bin/dcar.c:4730 ../bin/paramfilesearch_ui.c:75 msgid "Add" msgstr "Добавить" #: ../bin/dcar.c:3301 #, c-format msgid "Update %s Scale Car" msgstr "" #: ../bin/dcar.c:3302 ../bin/dcar.c:3312 ../bin/dcar.c:3321 #: ../bin/dcmpnd.c:178 msgid "Update" msgstr "Обновить" #: ../bin/dcar.c:3307 #, c-format msgid "New %s Scale Car Part" msgstr "" #: ../bin/dcar.c:3310 #, c-format msgid "Update %s Scale Car Part" msgstr "" #: ../bin/dcar.c:3317 msgid "New Prototype" msgstr "Новый тип вагона" #: ../bin/dcar.c:3320 msgid "Update Prototype" msgstr "Обновить прототип" #: ../bin/dcar.c:4009 msgid "Truck Center Offset plus Truck Centers must be less than Car Length" msgstr "" #: ../bin/dcar.c:4070 ../bin/dcar.c:4074 #, fuzzy msgid "Enter a 8 digit numeric date (yyyymmdd)" msgstr "Введите 8 цифр даты" #: ../bin/dcar.c:4077 msgid "Enter a date between 19000101 and 21991231" msgstr "Введите дату между 19000101 и 21991231" #: ../bin/dcar.c:4083 msgid "Invalid month" msgstr "Неправильный месяц" #: ../bin/dcar.c:4086 msgid "Invalid day" msgstr "Неправильный день" #: ../bin/dcar.c:4184 msgid "Select or Enter a Manufacturer" msgstr "Выберите или создайте производителя" #: ../bin/dcar.c:4188 #, c-format msgid "Item Index %ld duplicated an existing item: updated to new value" msgstr "" #: ../bin/dcar.c:4410 #, c-format msgid "Added %ld new Cars" msgstr "Добавлено %ld новых вагонов" #: ../bin/dcar.c:4412 msgid "Added new Car" msgstr "Добавлен новый вагон" #: ../bin/dcar.c:4415 msgid "Updated Car" msgstr "Вагон обновлён" #: ../bin/dcar.c:4418 msgid " and Part" msgstr "" #: ../bin/dcar.c:4450 #, c-format msgid "%s Part: %s %s %s %s %s %s" msgstr "" #: ../bin/dcar.c:4451 ../bin/dcar.c:4473 msgid "Added new" msgstr "Добавлен новый" #: ../bin/dcar.c:4451 ../bin/dcar.c:4473 msgid "Updated" msgstr "Обновлён" #: ../bin/dcar.c:4472 #, c-format msgid "%s Prototype: %s%s." msgstr "%s Тип: %s%s." #: ../bin/dcar.c:4474 msgid ". Enter new values or press Close" msgstr ". Введите новые значения или нажмите Закрыть" #: ../bin/dcar.c:4598 msgid "New Car Part" msgstr "Новая запчасть" #: ../bin/dcar.c:4694 ../bin/dcar.c:4700 ../bin/dcustmgm.c:46 #: ../bin/dlayer.c:561 ../bin/layout.c:662 ../bin/scale.c:845 msgid "Scale" msgstr "Масштаб" #: ../bin/dcar.c:4695 ../bin/dcar.c:4701 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:488 msgid "Roadname" msgstr "Имя пути" #: ../bin/dcar.c:4695 msgid "Rep Marks" msgstr "" #: ../bin/dcar.c:4695 msgid "Purc Price" msgstr "Цена покупки" #: ../bin/dcar.c:4696 ../bin/dcar.c:4702 msgid "Curr Price" msgstr "Текущ. цена" #: ../bin/dcar.c:4696 msgid "Purc Date" msgstr "Дата покупки" #: ../bin/dcar.c:4696 msgid "Srvc Date" msgstr "Дата обсл." #: ../bin/dcar.c:4697 msgid "Locat'n" msgstr "Место" #: ../bin/dcar.c:4701 msgid "RepMarks" msgstr "Метки" #: ../bin/dcar.c:4701 msgid "Purch Price" msgstr "Цена покупки" #: ../bin/dcar.c:4702 msgid "Purch Date" msgstr "Дата покупки" #: ../bin/dcar.c:4720 msgid "Sort By" msgstr "Сортировка" #: ../bin/dcar.c:4728 ../bin/dcustmgm.c:58 ../bin/dcustmgm.c:98 #: ../bin/dcontmgm.c:88 msgid "Edit" msgstr "Правка" #: ../bin/dcar.c:4732 ../bin/dcar.c:5654 ../bin/dcustmgm.c:60 #: ../bin/dcontmgm.c:90 ../bin/menu.c:992 msgid "Delete" msgstr "Удалить" #: ../bin/dcar.c:4736 ../bin/fileio.c:1631 msgid "Export" msgstr "Экспорт" #: ../bin/dcar.c:4738 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:676 msgid "List" msgstr "Список" #: ../bin/dcar.c:4894 ../bin/dcar.c:5686 ../bin/menu.c:1416 msgid "Car Inventory" msgstr "Депо" #: ../bin/dcar.c:5026 msgid "List Cars" msgstr "Список машин" #: ../bin/dcar.c:5150 ../bin/dcar.c:5322 msgid "Import Cars" msgstr "Импортировать машины" #: ../bin/dcar.c:5323 ../bin/dcar.c:5453 #, fuzzy msgid "Comma-Separated-Values (*.csv)|*.csv" msgstr "Значения, разделённые запятой|*.csv" #: ../bin/dcar.c:5395 ../bin/dcar.c:5452 msgid "Export Cars" msgstr "Экспорт машин" #: ../bin/dcar.c:5494 msgid "Shelf" msgstr "Полка" #: ../bin/dcar.c:5653 #, fuzzy msgid "Shelve" msgstr "Полка" #: ../bin/dcmpnd.c:73 ../bin/dlayer.c:590 ../bin/menu.c:364 ../bin/menu.c:398 msgid "Load" msgstr "Загрузить" #: ../bin/dcmpnd.c:111 msgid "Updating definitions, please wait" msgstr "Обновление определений, пожалуйста ждите" #: ../bin/dcmpnd.c:178 msgid "Update Title" msgstr "Обновить заголовок" #: ../bin/dcmpnd.c:244 #, c-format msgid "End-Point #%d of the selected and actual turnouts are not close" msgstr "" #: ../bin/dcmpnd.c:255 #, c-format msgid "End-Point #%d of the selected and actual turnouts are not aligned" msgstr "" #: ../bin/dcmpnd.c:274 msgid "The selected Turnout had a differing number of End-Points" msgstr "" #: ../bin/dcmpnd.c:341 msgid "Skip" msgstr "Пропустить" #: ../bin/dcmpnd.c:374 #, c-format msgid "%d Track(s) refreshed" msgstr "%d трек(ов) обновлено" #: ../bin/dcmpnd.c:419 msgid "Refresh Turnout/Structure" msgstr "Обновить Стрелку/Структуру" #: ../bin/dcmpnd.c:423 msgid "Choose a Turnout/Structure to replace:" msgstr "Выберите Стрелку/Структуру для замены:" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:457 #: ../bin/dcmpnd.c:436 ../bin/doption.c:94 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1226 msgid "Turnouts" msgstr "Стрелки" #: ../bin/dcmpnd.c:436 msgid "Structures" msgstr "Структуры" #: ../bin/dcmpnd.c:467 msgid "Choose another Turnout/Structure to replace:" msgstr "Выберите другую Стрелку/Структуру для замены:" #: ../bin/dcmpnd.c:582 msgid "Rename Object" msgstr "Переименовать объект" #: ../bin/dcustmgm.c:54 #, fuzzy msgid "Create a new " msgstr "Создать полилинию" #: ../bin/dcustmgm.c:56 #, fuzzy msgid "Go" msgstr "Хорошее" #: ../bin/dcustmgm.c:62 msgid "Move To" msgstr "Переместить" #: ../bin/dcustmgm.c:98 msgid "Rename" msgstr "Переименовать" #: ../bin/dcustmgm.c:186 msgid "Label" msgstr "Метка" #: ../bin/dcustmgm.c:225 msgid "Contents Label" msgstr "Содержимое метки" #: ../bin/dcustmgm.c:284 msgid "Move To XTP" msgstr "Переместить в XTP" #: ../bin/dcustmgm.c:285 #, fuzzy msgid "Parameter File (*.xtp)|*.xtp" msgstr "Файл параметров|*.xtp" #: ../bin/dcustmgm.c:407 msgid "Manage custom designed parts" msgstr "Управление элементами нестандартного дизайна" #: ../bin/dcontmgm.c:80 msgid "Tracks" msgstr "Треки" #: ../bin/dcontmgm.c:167 #, c-format msgid "Are you sure you want to delete the %d control element(s)" msgstr "Вы уверены, что хотите удалить %d элементов" #: ../bin/dcontmgm.c:172 msgid "Control Elements" msgstr "Элементы управления" #: ../bin/dcontmgm.c:308 msgid "Manage Layout Control Elements" msgstr "Управление элементами проекта" #: ../bin/dease.c:68 msgid "Sharp" msgstr "Острые" #: ../bin/dease.c:68 msgid "Broad" msgstr "Широкие" #: ../bin/dease.c:68 msgid "Cornu" msgstr "Отриц." #: ../bin/dease.c:76 msgid "Value" msgstr "Значение" #: ../bin/dease.c:77 ../bin/tease.c:530 msgid "R" msgstr "Рад." #: ../bin/dease.c:79 ../bin/tease.c:531 msgid "L" msgstr "Дл." #: ../bin/dease.c:250 msgid "Easement" msgstr "Упрощения" #: ../bin/denum.c:44 msgid "Prices" msgstr "Цены" #: ../bin/denum.c:45 ../bin/denum.c:139 #, fuzzy msgid "Indexes" msgstr "№" #: ../bin/denum.c:50 msgid "Save As ..." msgstr "Сохранить как ..." #: ../bin/denum.c:135 ../bin/denum.c:198 ../bin/denum.c:236 msgid "Each" msgstr "Цена" #: ../bin/denum.c:152 ../bin/denum.c:154 msgid "Parts List" msgstr "Список компонентов" #: ../bin/denum.c:160 #, c-format msgid "" "%s Parts List\n" "\n" msgstr "" "%s Список компонентов\n" "\n" #: ../bin/denum.c:199 ../bin/denum.c:238 ../bin/denum.c:248 msgid "Extended" msgstr "Сумма" #: ../bin/denum.c:247 ../bin/denum.c:251 msgid "Total" msgstr "Итого" #: ../bin/dlayer.c:541 #, fuzzy msgid "Select Layer:" msgstr "Сохранить текущий слой" #: ../bin/dlayer.c:547 #, fuzzy msgid "Use Color" msgstr "%s Цвет" #: ../bin/dlayer.c:549 msgid "Visible" msgstr "Показывать" #: ../bin/dlayer.c:551 msgid "Frozen" msgstr "Заморожен" #: ../bin/dlayer.c:553 msgid "On Map" msgstr "На карте" #: ../bin/dlayer.c:555 #, fuzzy msgid "Module" msgstr "Режим" #: ../bin/dlayer.c:557 #, fuzzy msgid "No Button" msgstr "Отмена / повтор" #: ../bin/dlayer.c:559 #, fuzzy msgid "Inherit" msgstr "Инвертировано" #: ../bin/dlayer.c:563 ../bin/layout.c:664 msgid " Gauge" msgstr " Колея" #: ../bin/dlayer.c:565 ../bin/layout.c:666 msgid "Min Track Radius" msgstr "Мин. радиус трека" #: ../bin/dlayer.c:567 ../bin/layout.c:667 #, fuzzy msgid " Max Track Grade (%)" msgstr " Макс. наклон трека (%)" #: ../bin/dlayer.c:569 #, fuzzy msgid "Tie Length" msgstr "Общая длина" #: ../bin/dlayer.c:571 #, fuzzy msgid " Width" msgstr "Ширина" #: ../bin/dlayer.c:573 #, fuzzy msgid " Spacing" msgstr "Размер" #: ../bin/dlayer.c:575 #, fuzzy msgid "Layer Actions" msgstr "Управление слоями" #: ../bin/dlayer.c:577 #, fuzzy msgid "Add Layer" msgstr "Слой" #: ../bin/dlayer.c:579 #, fuzzy msgid "Delete Layer" msgstr "Сохранить текущий слой" #: ../bin/dlayer.c:581 #, fuzzy msgid "Default Values" msgstr "По-умолчанию" #: ../bin/dlayer.c:582 msgid "Number of Layer Buttons" msgstr "Кол-во кнопок слоёв" #: ../bin/dlayer.c:584 #, fuzzy msgid "Linked Layers" msgstr "Изменить слои" #: ../bin/dlayer.c:586 msgid "Settings when Current" msgstr "" #: ../bin/dlayer.c:588 #, fuzzy msgid "Object Count:" msgstr "Переименовать объект" #: ../bin/dlayer.c:589 #, fuzzy msgid "All Layer Preferences" msgstr "Настройки предпочтений" #: ../bin/dlayer.c:591 ../bin/macro.c:1431 msgid "Save" msgstr "Сохранить" #: ../bin/dlayer.c:592 msgid "Defaults" msgstr "По-умолчанию" #: ../bin/dlayer.c:710 ../bin/dlayer.c:1563 ../bin/dlayer.c:1581 #: ../bin/dlayer.c:1651 msgid "Main" msgstr "Главный" #: ../bin/dlayer.c:842 msgid "Layer must not have any objects in it." msgstr "" #: ../bin/dlayer.c:1007 ../bin/dlayer.c:1452 ../bin/dlayer.c:1584 #: ../bin/dlayer.c:1653 msgid "Show/Hide Layer" msgstr "Показать/Спрятать слой" #: ../bin/dlayer.c:2071 msgid "Layers" msgstr "Слои" #: ../bin/dlayer.c:2334 ../bin/menu.c:960 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:17 #, fuzzy msgid "Show/Hide Background" msgstr "Показать/Спрятать слой" #: ../bin/doption.c:92 msgid "Auto Pan" msgstr "Автомасштаб" #: ../bin/doption.c:94 msgid "All" msgstr "Все" #: ../bin/doption.c:95 msgid "Thick" msgstr "Толстые" #: ../bin/doption.c:95 msgid "Exception" msgstr "Выделенные" #: ../bin/doption.c:96 msgid "Outline" msgstr "Контур" #: ../bin/doption.c:97 msgid "Off" msgstr "Нет" #: ../bin/doption.c:97 msgid "On" msgstr "Да" #: ../bin/doption.c:98 msgid "Track Descriptions" msgstr "Описание трека" #: ../bin/doption.c:98 msgid "Lengths" msgstr "Длины" #: ../bin/doption.c:98 msgid "EndPt Elevations" msgstr "Крайние точки" #: ../bin/doption.c:98 msgid "Track Elevations" msgstr "Высоты трека" #: ../bin/doption.c:98 msgid "Cars" msgstr "Вагоны" #: ../bin/doption.c:99 ../bin/doption.c:100 msgid "Descr" msgstr "Опис." #: ../bin/doption.c:100 msgid "Manuf" msgstr "Произв." #: ../bin/doption.c:101 ../bin/doption.c:102 #, fuzzy msgid "Object" msgstr "Переименовать объект" #: ../bin/doption.c:103 msgid "Live Map" msgstr "Миникарта" #: ../bin/doption.c:104 msgid "Hide Trains On Hidden Track" msgstr "Не показывать поезда на скрытых треках" #: ../bin/doption.c:105 msgid "Constrain Drawing Area to Room boundaries" msgstr "" #: ../bin/doption.c:106 msgid "Don't Hide System Cursor when program cursor is active" msgstr "" #: ../bin/doption.c:110 #, fuzzy msgid "Color Track" msgstr "Кривой трек" #: ../bin/doption.c:111 #, fuzzy msgid "Color Draw" msgstr "Цвет" #: ../bin/doption.c:112 msgid "Draw Tunnel" msgstr "Отображение тоннеля" #: ../bin/doption.c:113 msgid "Draw EndPts" msgstr "Рисовать концы" #: ../bin/doption.c:114 msgid "Draw Unconnected EndPts" msgstr "Несоединённые концы" #: ../bin/doption.c:115 msgid "Draw Ties" msgstr "Рисовать шпалы" #: ../bin/doption.c:116 msgid "Draw Centers" msgstr "Рисовать центры" #: ../bin/doption.c:117 msgid "Two Rail Scale" msgstr "Масштаб двухколейки" #: ../bin/doption.c:118 msgid "Map Scale" msgstr "Масштаб карты" #: ../bin/doption.c:124 msgid "Label Enable" msgstr "Подписи" #: ../bin/doption.c:125 msgid "Label Scale" msgstr "Масштаб надписей" #: ../bin/doption.c:126 msgid "Label Font Size" msgstr "Размер шрифта" #: ../bin/doption.c:127 msgid "Hot Bar Labels" msgstr "Панель быстрых команд" #: ../bin/doption.c:128 msgid "Layout Labels" msgstr "Слой" #: ../bin/doption.c:129 msgid "List Labels" msgstr "Списки" #: ../bin/doption.c:132 msgid "Car Labels" msgstr "Надписи машин" #: ../bin/doption.c:133 msgid "Train Update Delay" msgstr "Интервал обновления поезда" #: ../bin/doption.c:176 msgid "Turning off AutoSave" msgstr "" #: ../bin/doption.c:187 msgid "Turning on CheckPointing" msgstr "" #: ../bin/doption.c:201 msgid "Display Options" msgstr "Настройки отображения" #: ../bin/doption.c:203 msgid "Proto" msgstr "" #: ../bin/doption.c:205 msgid "Proto/Manuf" msgstr "Proto/Производитель" #: ../bin/doption.c:208 msgid "Proto/Manuf/Part Number" msgstr "Proto/Производитель/Артикул" #: ../bin/doption.c:210 msgid "Proto/Manuf/Partno/Item" msgstr "Proto/Производитель/Артикул/Item" #: ../bin/doption.c:211 msgid "Manuf/Proto" msgstr "Производитель/Proto" #: ../bin/doption.c:214 msgid "Manuf/Proto/Part Number" msgstr "Производитель/Proto/Артикул" #: ../bin/doption.c:216 msgid "Manuf/Proto/Partno/Item" msgstr "Производитель/Proto/Артикул/Item" #: ../bin/doption.c:246 msgid "Single item selected, +Ctrl Add to selection" msgstr "" #: ../bin/doption.c:246 msgid "Add to selection, +Ctrl Single item selected" msgstr "" #: ../bin/doption.c:247 #, fuzzy msgid "Deselect all on select nothing" msgstr "Убрать выделение со всех объектов" #: ../bin/doption.c:252 msgid "Normal: Command List, Shift: Command Options" msgstr "" #: ../bin/doption.c:252 msgid "Normal: Command Options, Shift: Command List" msgstr "" #: ../bin/doption.c:255 msgid "Default Command" msgstr "Команда по-умолчанию" #: ../bin/doption.c:257 msgid "Hide Selection Window" msgstr "Спрятать выбранное окно" #: ../bin/doption.c:259 msgid "Right Click" msgstr "Правый клик" #: ../bin/doption.c:260 #, fuzzy msgid "Select Mode" msgstr "Выбрать объекты" #: ../bin/doption.c:286 msgid "Command Options" msgstr "Опции команд" #: ../bin/doption.c:310 msgid "16 px" msgstr "" #: ../bin/doption.c:310 msgid "24 px" msgstr "" #: ../bin/doption.c:310 msgid "32 px" msgstr "" #: ../bin/doption.c:311 msgid "English" msgstr "Английская" #: ../bin/doption.c:311 msgid "Metric" msgstr "Метрическая" #: ../bin/doption.c:312 msgid "Polar" msgstr "Полярная" #: ../bin/doption.c:312 msgid "Cartesian" msgstr "Прямоугольная" #: ../bin/doption.c:313 msgid "Balloon Help" msgstr "Всплывающая подсказка" #: ../bin/doption.c:314 msgid "Show FlexTrack in HotBar" msgstr "" #: ../bin/doption.c:315 msgid "Load Last Layout" msgstr "загрузить последний проект" #: ../bin/doption.c:315 msgid "Start New Layout" msgstr "загрузить новый проект" #: ../bin/doption.c:318 #, fuzzy msgid "Icon Size" msgstr "Размер шрифта" #: ../bin/doption.c:319 msgid "Angles" msgstr "Углы" #: ../bin/doption.c:321 msgid "Units" msgstr "Система мер" #: ../bin/doption.c:323 msgid "Length Format" msgstr "Формат длины" #: ../bin/doption.c:324 msgid "Min Track Length" msgstr "Минимальная длина трека" #: ../bin/doption.c:325 msgid "Connection Distance" msgstr "Длина соединения" #: ../bin/doption.c:326 msgid "Connection Angle" msgstr "Угол соединения" #: ../bin/doption.c:327 msgid "Turntable Angle" msgstr "Угол разворота" #: ../bin/doption.c:328 msgid "Max Coupling Speed" msgstr "Максимальная скорость сцепления" #: ../bin/doption.c:331 msgid "Drag Distance" msgstr "Длина перетаскивания" #: ../bin/doption.c:332 msgid "Drag Timeout" msgstr "Время перетаскивания" #: ../bin/doption.c:333 msgid "Min Grid Spacing" msgstr "Минимальное расстояние сетки" #: ../bin/doption.c:335 #, fuzzy msgid "Check Point Frequency" msgstr "Контрольная точка" #: ../bin/doption.c:337 msgid "Autosave Checkpoint Frequency" msgstr "" #: ../bin/doption.c:338 msgid "On Program Startup" msgstr "При старте программы" #: ../bin/doption.c:348 ../bin/doption.c:352 ../bin/doption.c:370 msgid "999.999" msgstr "999.999" #: ../bin/doption.c:349 msgid "999.999999" msgstr "999.999999" #: ../bin/doption.c:350 msgid "999.99999" msgstr "999.99999" #: ../bin/doption.c:351 msgid "999.9999" msgstr "999.9999" #: ../bin/doption.c:353 ../bin/doption.c:371 msgid "999.99" msgstr "999.99" #: ../bin/doption.c:354 ../bin/doption.c:372 msgid "999.9" msgstr "999.9" #: ../bin/doption.c:355 msgid "999 7/8" msgstr "999 7/8" #: ../bin/doption.c:356 msgid "999 63/64" msgstr "999 63/64" #: ../bin/doption.c:357 msgid "999' 11.999\"" msgstr "999' 11.999\"" #: ../bin/doption.c:358 msgid "999' 11.99\"" msgstr "999' 11.99\"" #: ../bin/doption.c:359 msgid "999' 11.9\"" msgstr "999' 11.9\"" #: ../bin/doption.c:360 msgid "999' 11 7/8\"" msgstr "999' 11 7/8\"" #: ../bin/doption.c:361 msgid "999' 11 63/64\"" msgstr "999' 11 63/64\"" #: ../bin/doption.c:362 msgid "999ft 11.999in" msgstr "999ф 11.999д" #: ../bin/doption.c:363 msgid "999ft 11.99in" msgstr "999ф 11.99д" #: ../bin/doption.c:364 msgid "999ft 11.9in" msgstr "999ф 11.9д" #: ../bin/doption.c:365 msgid "999ft 11 7/8in" msgstr "999ф 11 7/8д" #: ../bin/doption.c:366 msgid "999ft 11 63/64in" msgstr "999ф 11 63/64д" #: ../bin/doption.c:373 msgid "999.999mm" msgstr "999.999мм" #: ../bin/doption.c:374 msgid "999.99mm" msgstr "999.99мм" #: ../bin/doption.c:375 msgid "999.9mm" msgstr "999.9мм" #: ../bin/doption.c:376 msgid "999.999cm" msgstr "999.999см" #: ../bin/doption.c:377 msgid "999.99cm" msgstr "999.99см" #: ../bin/doption.c:378 msgid "999.9cm" msgstr "999.9см" #: ../bin/doption.c:379 msgid "999.999m" msgstr "999.999м" #: ../bin/doption.c:380 msgid "999.99m" msgstr "999.99м" #: ../bin/doption.c:381 msgid "999.9m" msgstr "999.9м" #: ../bin/doption.c:516 msgid "Preferences" msgstr "Настройки предпочтений" #: ../bin/doption.c:560 msgid "Marker" msgstr "Маркер" #: ../bin/doption.c:561 msgid "Border" msgstr "Граница" #: ../bin/doption.c:562 msgid "Primary Axis" msgstr "Главные оси" #: ../bin/doption.c:563 msgid "Secondary Axis" msgstr "Дополнительные оси" #: ../bin/doption.c:564 msgid "Normal Track" msgstr "Трек" #: ../bin/doption.c:565 msgid "Selected Track" msgstr "Выбранный трек" #: ../bin/doption.c:566 msgid "Profile Path" msgstr "" #: ../bin/doption.c:567 msgid "Exception Track" msgstr "" #: ../bin/doption.c:568 msgid "Track Ties" msgstr "Шпалы" #: ../bin/doption.c:569 #, fuzzy msgid "Bridge Base" msgstr "Трек Безье" #: ../bin/doption.c:570 #, fuzzy msgid "Track Roadbed" msgstr "Мин. радиус трека" #: ../bin/dpricels.c:42 msgid "Price" msgstr "Цена" #: ../bin/dpricels.c:56 msgid "Flex Track" msgstr "Изогнутый трек" #: ../bin/dpricels.c:57 msgid "costs" msgstr "стоит" #: ../bin/dpricels.c:166 msgid "Price List" msgstr "Прайслист" #: ../bin/dprmfile.c:66 ../bin/paramfilesearch_ui.c:50 msgid "Show File Names" msgstr "Показывать имена файлов" #: ../bin/dprmfile.c:75 ../bin/paramfilesearch_ui.c:77 msgid "Select all" msgstr "Выбрать всё" #: ../bin/dprmfile.c:77 msgid "Favorite" msgstr "" #: ../bin/dprmfile.c:80 #, fuzzy msgid "Library..." msgstr "Слои ..." #: ../bin/dprmfile.c:81 #, fuzzy msgid "Browse..." msgstr "Выбрать ..." #: ../bin/dprmfile.c:328 #, fuzzy, c-format msgid "%d parameter files reloaded." msgstr "Чтение файлов с параметрами" #: ../bin/dprmfile.c:330 #, fuzzy msgid "One parameter file reloaded." msgstr "Чтение файлов с параметрами" #: ../bin/dprmfile.c:431 msgid "Parameter Files" msgstr "Файлы параметров" #: ../bin/dprmfile.c:434 msgid "Load Parameters" msgstr "Загрузить параметры" #: ../bin/dprmfile.c:434 #, fuzzy msgid "Parameter files (*.xtp)|*.xtp" msgstr "Файлы параметров|*.xtp" #: ../bin/draw.c:2352 msgid "Macro Zoom Mode" msgstr "" #: ../bin/draw.c:2360 msgid "Scale 1:1 - Use Ctrl+ to go to Macro Zoom Mode" msgstr "" #: ../bin/draw.c:2365 msgid "Preset Zoom In Value selected. Shift+Ctrl+PageDwn to reset value" msgstr "" #: ../bin/draw.c:2369 #, c-format msgid "Zoom In Program Value %ld:1, Shift+PageDwn to use" msgstr "" #: ../bin/draw.c:2450 msgid "At Maximum Zoom Out" msgstr "" #: ../bin/draw.c:2457 msgid "Preset Zoom Out Value selected. Shift+Ctrl+PageUp to reset value" msgstr "" #: ../bin/draw.c:2461 #, c-format msgid "Zoom Out Program Value %ld:1 set, Shift+PageUp to use" msgstr "" #: ../bin/draw.c:3281 msgid "Map" msgstr "Миникарта" #: ../bin/draw.c:3323 msgid "" "Left-Drag to pan, Ctrl+Left-Drag to zoom, 0 to set origin to zero, 1-9 to " "zoom#, e to set to extents" msgstr "" #: ../bin/draw.c:3330 msgid "Pan Mode - drag point to new position" msgstr "Режим просмотра - перемещайте мышкой проект" #: ../bin/draw.c:3337 msgid "Zoom Mode - drag area to zoom" msgstr "" #: ../bin/draw.c:3365 msgid "Can't move any further in that direction" msgstr "" #: ../bin/draw.c:3368 msgid "Left click to pan, right click to zoom, 'o' for origin, 'e' for extents" msgstr "" #: ../bin/draw.c:3407 msgid "" "Left Drag to Pan, +CTRL to Zoom, 0 to set Origin to 0,0, 1-9 to Zoom#, e to " "set to Extent" msgstr "" #: ../bin/draw.c:3486 msgid "Pan/Zoom" msgstr "Перемещение/Увеличение" #: ../bin/draw.c:3502 msgid "Zoom to 1:1 - '1'" msgstr "" #: ../bin/draw.c:3504 msgid "Zoom to 1:2 - '2'" msgstr "" #: ../bin/draw.c:3506 msgid "Zoom to 1:3 - '3'" msgstr "" #: ../bin/draw.c:3508 msgid "Zoom to 1:4 - '4'" msgstr "" #: ../bin/draw.c:3510 msgid "Zoom to 1:5 - '5'" msgstr "" #: ../bin/draw.c:3512 msgid "Zoom to 1:6 - '6'" msgstr "" #: ../bin/draw.c:3514 msgid "Zoom to 1:7 - '7'" msgstr "" #: ../bin/draw.c:3516 msgid "Zoom to 1:8 - '8'" msgstr "" #: ../bin/draw.c:3518 msgid "Zoom to 1:9 - '9'" msgstr "" #: ../bin/draw.c:3524 msgid "Pan center here - 'c'" msgstr "" #: ../bin/drawgeom.c:72 ../bin/drawgeom.c:89 msgid "Create Lines" msgstr "Создать линии" #: ../bin/drawgeom.c:443 msgid "Drag next point, +Alt reverse Magnetic Snap or +Ctrl lock to 90 deg" msgstr "" #: ../bin/drawgeom.c:454 msgid "" "Drag next point, +Alt reverse Magnetic Snap, or +Ctrl to lock to 90 degrees" msgstr "" #: ../bin/drawgeom.c:487 msgid "Drag to set radius" msgstr "Тащите, чтобы установить радиус" #: ../bin/drawgeom.c:501 msgid "Drag set box size" msgstr "" #: ../bin/drawgeom.c:543 msgid "+Alt - reverse Magnetic Snap or +Ctrl - lock to 90 deg" msgstr "" #: ../bin/drawgeom.c:625 ../bin/drawgeom.c:691 #, c-format msgid "Length = %s, Angle = %0.2f" msgstr "Длина = %s, Угол = %0.2f" #: ../bin/drawgeom.c:713 #, c-format msgid "Straight Line: Length=%s Angle=%0.3f" msgstr "Прямая линия: Длина=%s Угол=%0.3f" #: ../bin/drawgeom.c:735 #, c-format msgid "Curved Line: Radius=%s Angle=%0.3f Length=%s" msgstr "Кривая линия: Радиус=%s Угол=%0.3f Длина=%s" #: ../bin/drawgeom.c:761 ../bin/drawgeom.c:769 #, c-format msgid "Radius = %s" msgstr "Радиус = %s" #: ../bin/drawgeom.c:780 #, c-format msgid "Width = %s, Height = %s" msgstr "Ширина = %s, Высота = %s" #: ../bin/drawgeom.c:841 msgid "Drag on Red arrows to adjust curve" msgstr "Тащите за красные стрелки для изменения кривой" #: ../bin/drawgeom.c:1298 #, fuzzy msgid "Select points or use context menu" msgstr "Выберите позицию точки" #: ../bin/drawgeom.c:1567 #, fuzzy, c-format msgid "Length = %s, Last angle = %0.2f" msgstr "Длина = %s, Угол = %0.2f" #: ../bin/drawgeom.c:1736 #, fuzzy msgid "Point Deleted" msgstr "Выбор шрифта" #: ../bin/drawgeom.c:2194 msgid "Not close to end of line" msgstr "" #: ../bin/drawgeom.c:2252 msgid "Not close to ends or middle of mine, reselect" msgstr "" #: ../bin/drawgeom.c:2303 ../bin/drawgeom.c:2550 msgid "Drag to Move Corner Point" msgstr "" #: ../bin/drawgeom.c:2311 msgid "Drag to Move Edge " msgstr "" #: ../bin/drawgeom.c:2383 #, c-format msgid "Length = %0.3f Angle = %0.3f" msgstr "" #: ../bin/drawgeom.c:2544 msgid "Drag to Move Edge" msgstr "" #: ../bin/dxfoutput.c:244 msgid "Export to DXF" msgstr "Экспортировать в DXF" #: ../bin/fileio.c:223 msgid "" "\n" "Do you want to continue?" msgstr "" "\n" "Вы хотите продолжить?" #: ../bin/fileio.c:595 #, c-format msgid "putTitle: title too long: %s" msgstr "" #: ../bin/fileio.c:627 msgid "Unnamed Trackplan" msgstr "Безымянный проект" #: ../bin/fileio.c:628 msgid " (R/O)" msgstr "" #: ../bin/fileio.c:779 msgid "Unknown layout file object - skip until next good object?" msgstr "" #: ../bin/fileio.c:835 ../bin/fileio.c:1022 msgid "Track" msgstr "Трек" #: ../bin/fileio.c:836 #, fuzzy msgid "Not Found" msgstr "Число точек" #: ../bin/fileio.c:1265 #, fuzzy msgid "AutoSave Tracks As" msgstr "Сохранить треки" #: ../bin/fileio.c:1280 msgid "Save Tracks" msgstr "Сохранить треки" #: ../bin/fileio.c:1297 msgid "Save Tracks As" msgstr "" #: ../bin/fileio.c:1309 msgid "Open Tracks" msgstr "Открыть треки" #: ../bin/fileio.c:1323 #, fuzzy msgid "Example Tracks" msgstr "Простые трек" #: ../bin/fileio.c:1400 #, fuzzy msgid "File AutoSaved" msgstr "Файлы" #: ../bin/fileio.c:1575 #, fuzzy, c-format msgid "Module - %s" msgstr "Подъем = %s" #: ../bin/fileio.c:1580 ../bin/fileio.c:1601 msgid "Import Tracks" msgstr "Импортировать треки" #: ../bin/fileio.c:1601 #, fuzzy msgid "Import Module" msgstr "Импорт" #: ../bin/fileio.c:1659 msgid "Export Tracks" msgstr "Экспортировать треки" #: ../bin/fileio.c:1680 msgid "Clipboard" msgstr "Буфер обмена" #: ../bin/filenoteui.c:60 ../bin/linknoteui.c:48 ../bin/textnoteui.c:41 #, fuzzy msgid "Position X" msgstr "Позиция" #: ../bin/filenoteui.c:62 ../bin/linknoteui.c:50 ../bin/textnoteui.c:43 #, fuzzy msgid "Position Y" msgstr "Позиция" #: ../bin/filenoteui.c:66 ../bin/linknoteui.c:54 #, fuzzy msgid "Title" msgstr "Подзаголовок" #: ../bin/filenoteui.c:68 ../bin/trknote.c:54 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:89 #, fuzzy msgid "Document" msgstr "Кол-во" #: ../bin/filenoteui.c:70 #, fuzzy msgid "Select..." msgstr "Выбрать" #: ../bin/filenoteui.c:72 ../bin/linknoteui.c:58 #, fuzzy msgid "Open..." msgstr "&Открыть ..." #: ../bin/filenoteui.c:134 msgid "Add Document" msgstr "" #: ../bin/filenoteui.c:157 msgid "The file doesn't exist or cannot be read!" msgstr "" #: ../bin/filenoteui.c:297 #, fuzzy, c-format msgid "Document(%d) Layer=%d %-.80s [%s]" msgstr "(%d): Слой=%d %s" #: ../bin/filenoteui.c:318 #, fuzzy msgid "Update Document" msgstr "Обновлён" #: ../bin/filenoteui.c:330 #, fuzzy msgid "Describe the file" msgstr "Подпись и выбор" #: ../bin/filenoteui.c:338 #, fuzzy msgid "Attach Document" msgstr "Кол-во" #: ../bin/i18n.c:57 #, c-format msgid "Gettext initialized (PACKAGE=%s, LOCALEDIR=%s, LC_ALL=%s).\n" msgstr "" #: ../bin/layout.c:553 ../bin/layout.c:994 #, c-format msgid "Unable to load Image File - %s" msgstr "" #: ../bin/layout.c:630 msgid "Load Background" msgstr "" #: ../bin/layout.c:657 msgid "Room Width" msgstr "Ширина комнаты" #: ../bin/layout.c:658 msgid " Height" msgstr " Высота" #: ../bin/layout.c:659 msgid "Layout Title" msgstr "Заголовок" #: ../bin/layout.c:660 msgid "Subtitle" msgstr "Подзаголовок" #: ../bin/layout.c:669 msgid "Background File Path" msgstr "" #: ../bin/layout.c:670 msgid "Browse ..." msgstr "Выбрать ..." #: ../bin/layout.c:673 msgid "Background PosX,Y" msgstr "" #: ../bin/layout.c:677 msgid "Background Size" msgstr "" #: ../bin/layout.c:679 msgid "Background Screen %" msgstr "" #: ../bin/layout.c:681 #, fuzzy msgid "Background Angle" msgstr "Конечный угол" #: ../bin/layout.c:682 msgid "Named Settings File" msgstr "" #: ../bin/layout.c:683 #, fuzzy msgid "Write" msgstr "Подзаголовок" #: ../bin/layout.c:684 #, fuzzy msgid "Read" msgstr "Повторить" #: ../bin/layout.c:818 msgid "Layout Options" msgstr "Настройки слоя" #: ../bin/layout.c:1052 msgid "Read Settings" msgstr "" #: ../bin/layout.c:1053 ../bin/layout.c:1087 #, fuzzy msgid "Settings File (*.xset)|*.xset" msgstr "Файл параметров|*.xtp" #: ../bin/layout.c:1086 #, fuzzy msgid "Write Settings" msgstr "Прямое выделение" #: ../bin/linknoteui.c:56 msgid "URL" msgstr "" #: ../bin/linknoteui.c:230 #, fuzzy msgid "Update Webink" msgstr "Обновить" #: ../bin/linknoteui.c:248 #, fuzzy msgid "Create Weblink" msgstr "Создать блок" #: ../bin/macro.c:67 msgid "Message" msgstr "Сообщение" #: ../bin/macro.c:166 msgid "Recording" msgstr "Запись" #: ../bin/macro.c:206 ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1309 msgid "End of Playback. Hit Step to exit\n" msgstr "Конец проигрыша. Нажмите Шаг для выхода\n" #: ../bin/macro.c:271 msgid "Record" msgstr "Запись" #: ../bin/macro.c:686 msgid "Step" msgstr "Шаг" #: ../bin/macro.c:689 ../bin/macro.c:1560 msgid "Next" msgstr "Дальше" #: ../bin/macro.c:692 ../bin/misc.c:696 ../bin/track.c:1104 msgid "Quit" msgstr "Выход" #: ../bin/macro.c:695 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:631 msgid "Speed" msgstr "Скорость" #: ../bin/macro.c:855 ../bin/track.c:1344 msgid "Regression" msgstr "" #: ../bin/macro.c:1010 ../bin/macro.c:1410 msgid "Demo" msgstr "Демонстрация" #: ../bin/macro.c:1219 #, c-format msgid "Elapsed time %lu\n" msgstr "Осталось времени %lu\n" #: ../bin/macro.c:1329 msgid "Playback" msgstr "Воспроизведение" #: ../bin/macro.c:1414 msgid "Slowest" msgstr "Очень медленно" #: ../bin/macro.c:1415 msgid "Slow" msgstr "Медленно" #: ../bin/macro.c:1417 msgid "Fast" msgstr "Быстро" #: ../bin/macro.c:1418 msgid "Faster" msgstr "Быстрее" #: ../bin/macro.c:1419 msgid "Fastest" msgstr "Очень быстро" #: ../bin/macro.c:1542 msgid "Can not find PARAMETER playback proc" msgstr "Невозможно найти PARAMETER в проигрыше" #: ../bin/menu.c:130 msgid "File Buttons" msgstr "Файлы" #: ../bin/menu.c:130 #, fuzzy msgid "Print Buttons" msgstr "Отмена / повтор" #: ../bin/menu.c:130 #, fuzzy msgid "Import/Export Buttons" msgstr "Масштаб" #: ../bin/menu.c:131 msgid "Zoom Buttons" msgstr "Масштаб" #: ../bin/menu.c:131 msgid "Undo Buttons" msgstr "Отмена / повтор" #: ../bin/menu.c:131 msgid "Easement Button" msgstr "Упрощения" #: ../bin/menu.c:131 msgid "SnapGrid Buttons" msgstr "Сетка" #: ../bin/menu.c:132 msgid "Create Track Buttons" msgstr "Создание треков" #: ../bin/menu.c:132 msgid "Layout Control Elements" msgstr "Элементы управления проекта" #: ../bin/menu.c:133 msgid "Modify Track Buttons" msgstr "Изменение треков" #: ../bin/menu.c:133 msgid "Properties/Select" msgstr "Свойства/Выбор" #: ../bin/menu.c:134 msgid "Track Group Buttons" msgstr "Треки" #: ../bin/menu.c:134 msgid "Train Group Buttons" msgstr "Поезда" #: ../bin/menu.c:135 msgid "Create Misc Buttons" msgstr "Различные кнопоки" #: ../bin/menu.c:135 msgid "Ruler Button" msgstr "Линейка" #: ../bin/menu.c:136 msgid "Layer Buttons" msgstr "Управление слоями" #: ../bin/menu.c:136 msgid "Hot Bar" msgstr "Горячие клавиши" #: ../bin/menu.c:225 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:82 msgid "Change Elevations" msgstr "Изменить высоты" #: ../bin/menu.c:250 msgid "Angle:" msgstr "Угол:" #: ../bin/menu.c:255 #, fuzzy msgid "Indexes:" msgstr "№" #: ../bin/menu.c:262 msgid "Move X:" msgstr "Двигать X:" #: ../bin/menu.c:263 msgid "Move Y:" msgstr "Двигать Y:" #: ../bin/menu.c:282 #, fuzzy msgid "Select Index" msgstr "Выбрать объекты" #: ../bin/menu.c:330 msgid "Enter Move ..." msgstr "" #: ../bin/menu.c:336 #, fuzzy msgid "Select Track Index ..." msgstr "Выбранный трек" #: ../bin/menu.c:343 msgid "180 " msgstr "180 " #: ../bin/menu.c:344 msgid "90 CW" msgstr "90 ЧС" #: ../bin/menu.c:345 msgid "45 CW" msgstr "45 ЧС" #: ../bin/menu.c:346 msgid "30 CW" msgstr "30 ЧС" #: ../bin/menu.c:347 msgid "15 CW" msgstr "15 ПЧС" #: ../bin/menu.c:348 msgid "15 CCW" msgstr "15 ПЧС" #: ../bin/menu.c:349 msgid "30 CCW" msgstr "30 ПЧС" #: ../bin/menu.c:350 msgid "45 CCW" msgstr "45 ПЧС" #: ../bin/menu.c:351 msgid "90 CCW" msgstr "90 ПЧС" #: ../bin/menu.c:352 msgid "Enter Angle ..." msgstr "Введите угол ..." #: ../bin/menu.c:369 msgid "examples" msgstr "" #: ../bin/menu.c:378 msgid "" "Do you want to return to the last saved state?\n" "\n" "Revert will cause all changes done since last save to be lost." msgstr "" "Вы хотите возвратить всё к предыдущему состоянию?\n" "\n" "Все несохранённые изменения будут потеряны." #: ../bin/menu.c:380 msgid "&Revert" msgstr "&Откат" #: ../bin/menu.c:380 ../bin/misc.c:660 msgid "&Cancel" msgstr "&Отмена" #: ../bin/menu.c:433 msgid "XTrackCAD Font" msgstr "Шрифты XTrackCAD" #: ../bin/menu.c:459 msgid "Sticky Commands" msgstr "Клейкие команды" #: ../bin/menu.c:478 msgid "Test Mallocs" msgstr "" #: ../bin/menu.c:497 msgid "Debug" msgstr "Отладка" #: ../bin/menu.c:582 msgid "No Messages" msgstr "Нет сообщений" #: ../bin/menu.c:606 #, c-format msgid "No help for %s" msgstr "Нет помощи для %s" #: ../bin/menu.c:656 #, c-format msgid "No balloon help for %s\n" msgstr "Всплывающая подсказка для %s не задана\n" #: ../bin/menu.c:658 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:694 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:695 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:697 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:698 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:700 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:701 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:702 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:703 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:704 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:705 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:706 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:707 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:708 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:709 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:710 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:711 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:712 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:713 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:714 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:715 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:716 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:717 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:718 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:719 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:720 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:721 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:722 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:723 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:724 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:725 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:726 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:727 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:728 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:729 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:730 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:731 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:732 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:733 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:734 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:735 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:736 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:737 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:738 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:739 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:740 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:741 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:742 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:743 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:744 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:745 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:746 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:747 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:748 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:749 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:750 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:751 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:752 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:753 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:754 #: ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:756 msgid "No Help" msgstr "Нет помощи" #: ../bin/menu.c:884 msgid "&File" msgstr "&Файл" #: ../bin/menu.c:885 msgid "&Edit" msgstr "&Правка" #: ../bin/menu.c:886 msgid "&View" msgstr "&Вид" #: ../bin/menu.c:887 msgid "&Add" msgstr "&Добавить" #: ../bin/menu.c:888 msgid "&Change" msgstr "&Изменить" #: ../bin/menu.c:889 msgid "&Draw" msgstr "&Рисовать" #: ../bin/menu.c:890 msgid "&Manage" msgstr "&Управление" #: ../bin/menu.c:891 msgid "&Options" msgstr "&Настройки" #: ../bin/menu.c:892 msgid "&Macro" msgstr "&Макросы" #: ../bin/menu.c:893 msgid "&Window" msgstr "&Окна" #: ../bin/menu.c:894 msgid "&Help" msgstr "&Справка" #: ../bin/menu.c:930 #, fuzzy msgid "Context Commands" msgstr "Остальные команды" #: ../bin/menu.c:931 msgid "Shift Context Commands" msgstr "" #: ../bin/menu.c:945 ../bin/menu.c:947 #, fuzzy msgid "Zoom Extents" msgstr "Масштаб" #: ../bin/menu.c:950 ../bin/menu.c:1185 msgid "Enable SnapGrid" msgstr "Прилипать к сетке" #: ../bin/menu.c:952 msgid "SnapGrid Show" msgstr "Показывать сетку" #: ../bin/menu.c:955 #, fuzzy msgid " Enable Magnetic Snap" msgstr "Прилипать к сетке" #: ../bin/menu.c:957 ../bin/menu.c:1207 msgid "Show/Hide Map" msgstr "Показать/Спрятать миникарту" #: ../bin/menu.c:981 ../bin/menu.c:983 #, fuzzy msgid "Select Track Index..." msgstr "Выбранный трек" #: ../bin/menu.c:995 ../bin/menu.c:996 #, fuzzy msgid "Add..." msgstr "Добавить" #: ../bin/menu.c:999 ../bin/menu.c:1000 #, fuzzy msgid "More..." msgstr "Больше" #: ../bin/menu.c:1005 msgid "&New ..." msgstr "&Новый ..." #: ../bin/menu.c:1007 msgid "&Open ..." msgstr "&Открыть ..." #: ../bin/menu.c:1011 ../bin/misc.c:660 msgid "&Save" msgstr "&Сохранить" #: ../bin/menu.c:1013 msgid "Save &As ..." msgstr "&Сохранить как..." #: ../bin/menu.c:1015 msgid "Revert" msgstr "Очистить изменения" #: ../bin/menu.c:1028 msgid "P&rint Setup ..." msgstr "&Настройки печати ..." #: ../bin/menu.c:1036 msgid "&Import" msgstr "&Импорт" #: ../bin/menu.c:1038 #, fuzzy msgid "Import &Module" msgstr "Импорт" #: ../bin/menu.c:1041 msgid "Export to &Bitmap" msgstr "Экспорт в изображение" #: ../bin/menu.c:1044 msgid "E&xport" msgstr "Экспорт" #: ../bin/menu.c:1046 msgid "Export D&XF" msgstr "Экспорт DXF" #: ../bin/menu.c:1050 #, fuzzy msgid "Export S&VG" msgstr "Экспорт DXF" #: ../bin/menu.c:1056 msgid "Parameter &Files ..." msgstr "Настройки файлов ..." #: ../bin/menu.c:1058 msgid "No&tes ..." msgstr "Заметки ..." #: ../bin/menu.c:1065 msgid "E&xit" msgstr "В&ыход" #: ../bin/menu.c:1102 msgid "&Undo" msgstr "&Отменить" #: ../bin/menu.c:1104 msgid "R&edo" msgstr "Повторить" #: ../bin/menu.c:1107 msgid "Cu&t" msgstr "Вырезать" #: ../bin/menu.c:1109 msgid "&Copy" msgstr "&Копировать" #: ../bin/menu.c:1111 msgid "&Paste" msgstr "&Вставить" #: ../bin/menu.c:1113 #, fuzzy msgid "C&lone" msgstr "Закрыть" #: ../bin/menu.c:1115 msgid "De&lete" msgstr "Удалить" #: ../bin/menu.c:1123 msgid "Select &All" msgstr "Выбрать всё" #: ../bin/menu.c:1127 #, fuzzy msgid "Select By Index" msgstr "Выбрать объекты" #: ../bin/menu.c:1129 msgid "&Deselect All" msgstr "Снять выделение" #: ../bin/menu.c:1131 msgid "&Invert Selection" msgstr "Инвертировать выделение" #: ../bin/menu.c:1134 msgid "Select Stranded Track" msgstr "Выбрать проблемные треки" #: ../bin/menu.c:1136 msgid "Tu&nnel" msgstr "Тоннель" #: ../bin/menu.c:1138 #, fuzzy msgid "B&ridge" msgstr "Мост" #: ../bin/menu.c:1140 #, fuzzy msgid "&Roadbed" msgstr "Дорога" #: ../bin/menu.c:1144 msgid "Move to &Front" msgstr "" #: ../bin/menu.c:1146 #, fuzzy msgid "Move to &Back" msgstr "Переместить треки" #: ../bin/menu.c:1161 msgid "Zoom &In" msgstr "&Приблизить" #: ../bin/menu.c:1164 msgid "Zoom &Out" msgstr "&Отдалить" #: ../bin/menu.c:1167 #, fuzzy msgid "Zoom &Extents" msgstr "&Приблизить" #: ../bin/menu.c:1178 msgid "&Redraw" msgstr "Перерисовать" #: ../bin/menu.c:1180 msgid "Redraw All" msgstr "Перерисовать всё" #: ../bin/menu.c:1187 msgid "Show SnapGrid" msgstr "Показать сетку" #: ../bin/menu.c:1198 #, fuzzy msgid "Enable Magnetic Snap" msgstr "Прилипать к сетке" #: ../bin/menu.c:1213 msgid "&Tool Bar" msgstr "Панели инструментов" #: ../bin/menu.c:1247 ../bin/menu.c:1248 #, fuzzy msgid "Control Element" msgstr "Элементы управления" #: ../bin/menu.c:1280 msgid "Change Scale" msgstr "Изменить масштаб" #: ../bin/menu.c:1296 msgid "Raise/Lower Elevations" msgstr "Увеличить/Уменьшить подъёмы" #: ../bin/menu.c:1305 msgid "Recompute Elevations" msgstr "Пересчтитать высоты" #: ../bin/menu.c:1323 msgid "L&ayout ..." msgstr "Слой ..." #: ../bin/menu.c:1325 msgid "&Display ..." msgstr "Отображение ..." #: ../bin/menu.c:1327 msgid "Co&mmand ..." msgstr "Команды..." #: ../bin/menu.c:1329 msgid "&Easements ..." msgstr "Упрощения ..." #: ../bin/menu.c:1332 msgid "&Fonts ..." msgstr "Шрифты ..." #: ../bin/menu.c:1334 msgid "Stic&ky ..." msgstr "Липучка ..." #: ../bin/menu.c:1339 msgid "&Debug ..." msgstr "Отладка ..." #: ../bin/menu.c:1342 msgid "&Preferences ..." msgstr "Предпочтения ..." #: ../bin/menu.c:1344 msgid "&Colors ..." msgstr "Цвета ..." #: ../bin/menu.c:1350 msgid "&Record ..." msgstr "Запись ..." #: ../bin/menu.c:1352 msgid "&Play Back ..." msgstr "Воспроизведение ..." #: ../bin/menu.c:1358 msgid "Main window" msgstr "Главное окно" #: ../bin/menu.c:1372 msgid "Recent Messages" msgstr "Недавние сообщения" #: ../bin/menu.c:1379 msgid "Tip of the Day..." msgstr "Совет дня..." #: ../bin/menu.c:1381 msgid "&Demos" msgstr "Обучение" #: ../bin/menu.c:1382 #, fuzzy msgid "Examples..." msgstr "Упрощения ..." #: ../bin/menu.c:1386 ../bin/smalldlg.c:210 msgid "About" msgstr "О программе" #: ../bin/menu.c:1399 msgid "Tur&nout Designer..." msgstr "Редактор стрелок..." #: ../bin/menu.c:1402 msgid "Layout &Control Elements" msgstr "&Элементы управления проекта" #: ../bin/menu.c:1404 msgid "&Group" msgstr "Группировать" #: ../bin/menu.c:1406 msgid "&Ungroup" msgstr "Разгруппировать" #: ../bin/menu.c:1410 msgid "Custom defined parts..." msgstr "Нестандартные элементы..." #: ../bin/menu.c:1413 msgid "Update Turnouts and Structures" msgstr "" #: ../bin/menu.c:1422 msgid "Layers ..." msgstr "Слои ..." #: ../bin/menu.c:1426 msgid "Parts &List ..." msgstr "Список &компонентов ..." #: ../bin/menu.c:1429 msgid "Price List..." msgstr "Стоимость компонентов..." #: ../bin/menu.c:1458 ../bin/menu.c:1459 #, fuzzy msgid "Import/Export" msgstr "Экспорт" #: ../bin/misc.c:487 ../bin/misc.c:491 msgid "ABORT" msgstr "АВАРИЯ" #: ../bin/misc.c:490 msgid "" "\n" "Do you want to save your layout?" msgstr "" "\n" "Вы хотите сохранить ваш проект?" #: ../bin/misc.c:658 msgid "" "Save changes to the layout design before closing?\n" "\n" "If you don't save now, your unsaved changes will be discarded." msgstr "" "Сохранить изменения перед закрытием?\n" "\n" "Если вы не сделаете это, все ваши несохранённые изменения будут потеряны." #: ../bin/misc.c:660 msgid "&Don't Save" msgstr "Не сохранять" #: ../bin/misc.c:991 msgid "" "Program was not terminated properly. Do you want to resume working on the " "previous trackplan?" msgstr "" "Программа была завершена некорректно. Вы хотите продолжить работать с " "предыдущим проектом?" #: ../bin/misc.c:992 msgid "Resume" msgstr "Продолжить" #: ../bin/misc.c:992 msgid "Resume with New Name" msgstr "" #: ../bin/misc.c:992 #, fuzzy msgid "Ignore Checkpoint" msgstr "Контрольная точка" #: ../bin/misc.c:995 #, c-format msgid "Reload Checkpoint Selected\n" msgstr "" #: ../bin/misc.c:997 #, c-format msgid "Reload Checkpoint With New Name Selected\n" msgstr "" #: ../bin/misc.c:999 #, c-format msgid "Ignore Checkpoint Selected\n" msgstr "" #: ../bin/misc.c:1121 #, c-format msgid "Unnamed Trackplan - %s(%s)" msgstr "Безымянный проект - %s(%s)" #: ../bin/misc.c:1175 msgid "Initializing commands" msgstr "Инициализация команд" #: ../bin/misc.c:1184 msgid "Initializing menus" msgstr "Инициализация меню" #: ../bin/misc.c:1216 msgid "Reading parameter files" msgstr "Чтение файлов с параметрами" #: ../bin/misc.c:1260 msgid "Initialization complete" msgstr "Инициализация завершена" #: ../bin/param.c:76 msgid "Unexpected End Of String" msgstr "Неожиданный конец строки" #: ../bin/param.c:83 msgid "Expected digit" msgstr "Введите цифру" #: ../bin/param.c:91 msgid "Overflow" msgstr "Переполнение" #: ../bin/param.c:140 msgid "Divide by 0" msgstr "Деление на 0" #: ../bin/param.c:148 msgid "Expected /" msgstr "Пропущено /" #: ../bin/param.c:233 msgid "Invalid Units Indicator" msgstr "Неверный индикатор элементов" #: ../bin/param.c:261 msgid "Expected End Of String" msgstr "Ожидаемый конец строки" #: ../bin/param.c:289 ../bin/param.c:1528 #, c-format msgid "Invalid Number" msgstr "Неверный номер" #: ../bin/param.c:349 msgid "End Of String" msgstr "Конец строки" #: ../bin/param.c:1486 #, c-format msgid "Enter a value > %ld" msgstr "Наберите значение > %ld" #: ../bin/param.c:1489 #, c-format msgid "Enter a value < %ld" msgstr "Наберите значение < %ld" #: ../bin/param.c:1491 #, c-format msgid "Enter a value between %ld and %ld" msgstr "Наберите значение между %ld и %ld" #: ../bin/param.c:1568 #, c-format msgid "Enter a value > %s" msgstr "Наберите значение > %s" #: ../bin/param.c:1572 #, c-format msgid "Enter a value < %s" msgstr "Наберите значение < %s" #: ../bin/param.c:1575 #, c-format msgid "Enter a value between %s and %s" msgstr "Наберите значение между %s и %s" #: ../bin/param.c:1674 #, fuzzy msgid "String cannot be blank" msgstr "Слой не может быть изменён" #: ../bin/param.c:1689 #, c-format msgid "String is too long, Max length is %u" msgstr "" #: ../bin/param.c:1823 msgid "Invalid input(s), please correct the hilighted field(s)" msgstr "" #: ../bin/param.c:3043 msgid "Help" msgstr "Помощь" #: ../bin/paramfile.c:258 msgid "Parameter" msgstr "" #: ../bin/paramfile.c:363 msgid "Unknown param file line - skip until next good object?" msgstr "" #: ../bin/paramfilelist.c:69 #, c-format msgid "" "The parameter file: %s could not be found and was probably deleted or moved. " "The file is removed from the active parameter file list." msgstr "" #: ../bin/paramfilelist.c:126 #, c-format msgid "Updating %s" msgstr "Обновление %s" #: ../bin/paramfilesearch_ui.c:52 #, fuzzy msgid "Fit Any" msgstr "Первый " #: ../bin/paramfilesearch_ui.c:52 msgid "Fit Compatible" msgstr "" #: ../bin/paramfilesearch_ui.c:52 msgid "Fit Exact" msgstr "" #: ../bin/paramfilesearch_ui.c:192 #, fuzzy, c-format msgid "%u parameter files in library. %d Fit Scale." msgstr "Чтение файлов с параметрами" #: ../bin/paramfilesearch_ui.c:307 #, fuzzy, c-format msgid "%d parameter files found. %d Fit Scale" msgstr "Чтение файлов с параметрами" #: ../bin/paramfilesearch_ui.c:317 msgid "No matches found." msgstr "" #: ../bin/paramfilesearch_ui.c:477 #, fuzzy msgid "Choose parameter files" msgstr "Чтение файлов с параметрами" #: ../bin/paramfilesearch_ui.c:495 msgid "No system parameter files found, search is disabled." msgstr "" #: ../bin/partcatalog.c:739 msgid "Found: " msgstr "" #: ../bin/partcatalog.c:740 msgid "Similar: " msgstr "" #: ../bin/partcatalog.c:741 #, fuzzy msgid "Ignored: " msgstr "Игнорировать" #: ../bin/partcatalog.c:742 #, fuzzy msgid "Not found: " msgstr "Не на треке" #: ../bin/scale.c:301 #, c-format msgid "" "Invalid Scale: playback aborted\n" " SCALE %s" msgstr "" #: ../bin/scale.c:845 ../bin/scale.c:870 msgid "Ratio" msgstr "" #: ../bin/scale.c:854 msgid "Do not resize track" msgstr "Не изменять размер трека" #: ../bin/scale.c:858 msgid "Rescale by:" msgstr "" #: ../bin/scale.c:860 msgid "From:" msgstr "От:" #: ../bin/scale.c:864 msgid "To: " msgstr "" #: ../bin/scale.c:913 msgid "Rescale Tracks" msgstr "Перемасштабировать треки" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/xtrkcad.xtq:473 #: ../bin/scale.c:1084 ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1258 msgid "Rescale" msgstr "Перемасштабировать" #: ../bin/scale.c:1134 #, c-format msgid "%ld Objects to be rescaled" msgstr "" #: ../bin/smalldlg.c:45 msgid "Show tips at start" msgstr "" "Показывать\n" "советы\n" "при старте" #: ../bin/smalldlg.c:51 msgid "Did you know..." msgstr "Знаете ли вы..." #: ../bin/smalldlg.c:53 msgid "Previous Tip" msgstr "Предыдущий" #: ../bin/smalldlg.c:54 msgid "Next Tip" msgstr "Следующий" #: ../bin/smalldlg.c:72 msgid "Tip of the Day" msgstr "Совет дня" #: ../bin/smalldlg.c:82 msgid "No tips are available" msgstr "Советы недоступны" #: ../bin/smalldlg.c:187 msgid "" "XTrackCAD is a CAD (computer-aided design) program for designing model " "railroad layouts." msgstr "" "XTrackCAD это САПР (система автоматизированного проектирования) программа " "для проектирования макета железной дороги." #: ../bin/tbezier.c:214 #, c-format msgid "Bez: L%s A%0.3f trk_len=%s min_rad=%s" msgstr "" #: ../bin/tbezier.c:288 msgid "Ctl Pt 1: X,Y" msgstr "" #: ../bin/tbezier.c:289 msgid "Ctl Pt 2: X,Y" msgstr "" #: ../bin/tbezier.c:295 msgid "MinRadius" msgstr "Мин. радиус" #: ../bin/tbezier.c:300 msgid "Line Color" msgstr "Цвет линии" #: ../bin/tbezier.c:440 #, c-format msgid "" "Bezier %s(%d): Layer=%u MinRadius=%s Length=%s EP=[%0.3f,%0.3f] [%0.3f,%" "0.3f] CP1=[%0.3f,%0.3f] CP2=[%0.3f, %0.3f]" msgstr "" #: ../bin/tbezier.c:514 msgid "Bezier Track" msgstr "Трек Безье" #: ../bin/tcornu.c:246 #, c-format msgid "Cornu: L %s A %0.3f L %s MinR %s" msgstr "" #: ../bin/tcornu.c:321 msgid "Radius " msgstr "Радиус " #: ../bin/tcornu.c:329 msgid "Minimum Radius" msgstr "Минимальный радиус" #: ../bin/tcornu.c:330 msgid "Max Rate Of Curve Change/Scale" msgstr "" #: ../bin/tcornu.c:331 msgid "Total Winding Angle" msgstr "" #: ../bin/tcornu.c:476 #, c-format msgid "" "Cornu Track(%d): Layer=%u MinRadius=%s Length=%s EP=[%0.3f,%0.3f] [%0.3f,%" "0.3f]" msgstr "" #: ../bin/tcornu.c:532 msgid "Cornu Track" msgstr "" #: ../bin/tcurve.c:259 #, c-format msgid "Helix: Turns %ld L %0.2f Grade %0.1f%% Sep %0.2f" msgstr "" #: ../bin/tcurve.c:265 #, c-format msgid "Helix: Turns %ld L %0.2f" msgstr "" #: ../bin/tcurve.c:397 ../bin/tcurve.c:399 ../bin/tease.c:525 #: ../bin/tease.c:527 ../bin/tstraigh.c:88 ../bin/tstraigh.c:90 msgid "Z" msgstr "Z" #: ../bin/tcurve.c:591 #, c-format msgid "" "Helix Track(%d): Layer=%d Radius=%s Turns=%ld Length=%s Center=[%s,%s] EP=[%" "0.3f,%0.3f A%0.3f] [%0.3f,%0.3f A%0.3f]" msgstr "" #: ../bin/tcurve.c:602 #, c-format msgid "" "Curved Track(%d): Layer=%d Radius=%s Length=%s Center=[%s,%s] EP=[%0.3f,%" "0.3f A%0.3f] [%0.3f,%0.3f A%0.3f]" msgstr "" "Изогнутый трек(%d): Слой=%d Радиус=%s Длина=%s Центр=[%s,%s] EP=[%0.3f,%0.3f " "A%0.3f] [%0.3f,%0.3f A%0.3f]" #: ../bin/tcurve.c:681 msgid "Helix Track" msgstr "" #: ../bin/tcurve.c:687 msgid "Curved Track" msgstr "" #: ../bin/tcurve.c:1232 msgid "Merge Curves" msgstr "Совместить кривые" #: ../bin/tcurve.c:1306 msgid "Drag to change angle or create tangent" msgstr "" #: ../bin/tcurve.c:1341 ../bin/tcurve.c:1374 msgid "Curved " msgstr "" #: ../bin/tcurve.c:1347 msgid "Tangent " msgstr "Тангенс " #: ../bin/tcurve.c:1356 #, c-format msgid "Tangent track: Length %s Angle %0.3f" msgstr "" #: ../bin/tcurve.c:1378 #, c-format msgid "Curved: Radius=%s Length=%s Angle=%0.3f" msgstr "" #: ../bin/tease.c:532 msgid "l0" msgstr "" #: ../bin/tease.c:533 msgid "l1" msgstr "" #: ../bin/tease.c:581 #, c-format msgid "" "Joint Track(%d): Layer=%d Length=%0.3f EP=[%0.3f,%0.3f A%0.3f] [%0.3f,%0.3f A" "%0.3f]" msgstr "" #: ../bin/tease.c:629 msgid "Easement Track" msgstr "" #: ../bin/tease.c:1407 msgid "Merge Easements" msgstr "" #: ../bin/tease.c:1481 msgid "Split Easement Curve" msgstr "" #: ../bin/textnoteui.c:175 #, fuzzy, c-format msgid "Text Note(%d) Layer=%d %-.80s" msgstr "(%d): Слой=%d %s" #: ../bin/textnoteui.c:189 #, fuzzy msgid "Update Text Note" msgstr "Создать текст" #: ../bin/textnoteui.c:200 msgid "Replace this text with your note" msgstr "Замените этот текст вашей заметкой" #: ../bin/textnoteui.c:206 #, fuzzy msgid "Create Text Note" msgstr "Создать текст" #: ../bin/track.c:290 msgid "No track or structure pieces are present in layout" msgstr "" #: ../bin/track.c:292 msgid "No track or structure pieces are selected" msgstr "" #: ../bin/track.c:1461 msgid "Move Objects Above" msgstr "" #: ../bin/track.c:1481 msgid "Mode Objects Below" msgstr "" #: ../bin/track.c:1785 msgid "Audit" msgstr "Аудит" #: ../bin/track.c:1990 #, c-format msgid "Connecting a car to a non-car T%d T%d" msgstr "" #: ../bin/track.c:2000 ../bin/track.c:2005 #, c-format msgid "Connecting a non-track(%d) to (%d)" msgstr "" #: ../bin/track.c:2047 #, c-format msgid "Disconnecting a car from a non-car T%d T%d" msgstr "" #: ../bin/track.c:2081 msgid "Join Abutting Tracks" msgstr "" #: ../bin/track.c:2407 ../bin/track.c:2444 msgid "Inside turnout track" msgstr "" #: ../bin/track.c:2425 #, fuzzy, c-format msgid "Curve: Length=%s Radius=%0.3f Arc=%0.3f" msgstr "Кривая Безье: длина=%s мин. радиус=%s" #: ../bin/track.c:2452 ../bin/track.c:2517 ../bin/tstraigh.c:853 #, c-format msgid "Straight: Length=%s Angle=%0.3f" msgstr "Прямой: Длина=%s Угол=%0.3f" #: ../bin/track.c:3374 #, c-format msgid "[%0.2f,%0.2f] A%0.2f" msgstr "" #: ../bin/track.c:3378 #, c-format msgid "[%0.2f,%0.2f] A%0.2f\n" msgstr "" #: ../bin/trknote.c:52 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:154 #, fuzzy msgid "Text Note" msgstr "Создать текст" #: ../bin/trknote.c:53 #, fuzzy msgid "Link" msgstr "Прямая" #: ../bin/trknote.c:53 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:105 msgid "Weblink" msgstr "" #: ../bin/trknote.c:526 ../../../../build/v_5_3_0_beta1/app/help/bllnhlp.c:113 msgid "Place a note on the layout" msgstr "Поместить заметку на рабочую область" #: ../bin/trknote.c:540 msgid "New Note" msgstr "Новая заметка" #: ../bin/trknote.c:594 #, fuzzy msgid "Add notes" msgstr "Добавлен новый" #: ../bin/tstraigh.c:92 #, fuzzy msgid "Track Angle" msgstr "Угол" #: ../bin/tstraigh.c:212 #, c-format msgid "" "Straight Track(%d): Layer=%d Length=%s EP=[%0.3f,%0.3f A%0.3f] [%0.3f,%0.3f A" "%0.3f]" msgstr "" "Прямой трек(%d): Слой=%d Длина=%s EP=[%0.3f,%0.3f A%0.3f] [%0.3f,%0.3f A%" "0.3f]" #: ../bin/tstraigh.c:762 msgid "Extending Straight Track" msgstr "Расширение прямого трека" #: ../bin/tstraigh.c:845 msgid "Straight " msgstr "Прямая " #: ../bin/svgoutput.c:484 #, fuzzy msgid "Export to SVG" msgstr "Экспортировать в DXF" #: ../wlib/mswlib/mswmisc.c:188 #, fuzzy msgid "All image files" msgstr "Все файлы" #: ../wlib/mswlib/mswmisc.c:190 msgid "GIF files (*.gif)" msgstr "" #: ../wlib/mswlib/mswmisc.c:192 msgid "JPEG files (*.jpeg,*.jpg)" msgstr "" #: ../wlib/mswlib/mswmisc.c:194 msgid "PNG files (*.png)" msgstr "" #: ../wlib/mswlib/mswmisc.c:196 msgid "TIFF files (*.tiff, *.tif)" msgstr "" #: ../wlib/mswlib/mswmisc.c:198 #, fuzzy msgid "All files (*)" msgstr "Все файлы" #: ../wlib/mswlib/mswmisc.c:2062 ../wlib/mswlib/mswmisc.c:2105 msgid "Warning" msgstr "Предупреждение" #: ../wlib/mswlib/mswmisc.c:2067 msgid "Error" msgstr "Ошибка" #: ../wlib/mswlib/mswmisc.c:2203 msgid "&Contents" msgstr "&Содержание" #: ../wlib/mswlib/mswmisc.c:2204 msgid "&Search for Help on..." msgstr "" #: ../wlib/mswlib/mswmisc.c:2205 msgid "Co&mmand Context Help" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:9 #, c-format msgid "" "MSG_BETA_NOTICE\tXTrackCAD Version %s: Please note that this Beta Version of " "XTrackCAD is still undergoing final testing before its official release. The " "sole purpose of this Beta Version is to conduct testing and obtain feedback. " "Should you encounter any bugs, glitches, lack of functionality or other " "problems, please let us know immediately so we can rectify these " "accordingly. Your help in this regard is greatly appreciated!" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:10 #, c-format msgid "" "MSG_CANT_PLACE_FROGPOINTS\tFrog|Points cannot be placed on a turnout, circle " "or helix.\tA %s cannot be placed on a turnout, circle or helix." msgstr "" "MSG_CANT_PLACE_FROGPOINTS\tFrog|Points cannot be placed on a turnout, circle " "or helix.\t%s не может быть помещена на стрелку, круг или спираль." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:11 msgid "" "MSG_SEL_TRK_FROZEN\tA frozen layer contains selected track. Command cannot " "be executed." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:12 msgid "MSG_HELIX_TURNS_GTR_0\tA Helix must have one or more loops of track." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:13 msgid "" "MSG_LARGE_FONT\tA large font has been selected....\tA large font has been " "selected.\n" "Large fonts may a take a while to load.\n" "\n" "Do you wish to continue?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:14 msgid "" "MSG_TEXT_TOO_LONG\tThe entered text was too long for the text object. It was " "truncated." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:15 msgid "" "MSG_TODSGN_DESC_NONBLANK\tAll description fields present in the Turnout..." "\tAll description fields present in the Turnout\n" "Designer must contain appropriate information.\n" "Correct inappropriate values and try again." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:16 msgid "" "MSG_GROUP_NONBLANK\tAll fields listed in the Group dialog must contain " "data....\tAll fields listed in the Group dialog must contain data.\n" "Please enter missing values and try again." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:17 msgid "" "MSG_TODSGN_VALUES_GTR_0\tAll values specified in the Turnout Designer must " "be...\tAll values specified in the Turnout Designer must be\n" "greater than 0. Correct inappropriate values and try again." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:18 msgid "MSG_CURVE_OUT_OF_RANGE\tAngle must be between 0\\u00B0 and 360\\u00B0." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:19 msgid "" "MSG_TODSGN_CORNU_TOO_COMPLEX\tThe curves created by the Turnout Designer for " "a cornu curve have more than 128 segments....\tThe curves created by the " "Turnout Designer for a cornu curve have more than 128 segments.\n" "Try adjusting the end angles and radii to be closer in values." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:20 #, c-format msgid "" "MSG_CUSTMGM_DELETE_CONFIRM\tAre you sure you want to delete the NNN " "definition(s)?\tAre you sure you want to delete the\n" "%d definition(s)?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:21 msgid "MSG_WBITMAP_FAILED\tBitmap create or write function failed." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:22 msgid "MSG_BITMAP_TOO_LARGE\tBitmap is too large." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:23 msgid "MSG_CHANGE_ELEV_MODE\tCannot change elevation mode." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:24 msgid "" "MSG_GRID_ENABLE_SPACE_GTR_0\tCannot Enable Grid; spacing must be greater " "than 0" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:25 msgid "MSG_LAYER_FREEZE\tCannot freeze current layer" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:26 msgid "" "MSG_GROUP_NO_PATHS\tNo Paths were detected when grouping selected Tracks." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:27 msgid "" "MSG_CANT_GROUP_BUMPER1\tCannot Group Bumper Track. The track has been " "unselected." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:28 #, c-format msgid "MSG_CANNOT_GROUP_TRACK\tCannot Group selected track type %s." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:29 msgid "MSG_LAYER_HIDE\tCannot hide current layer" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:30 msgid "MSG_LAYER_MODULE\tCannot turn current layer into a Module" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:31 msgid "MSG_JOIN_EASEMENTS\tCannot Join; Easements do not align or abut." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:32 #, c-format msgid "" "MSG_TRK_ALREADY_CONN\tFirst|Second track is already connected.\tCannot Join; " "%s track is already connected." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:33 msgid "MSG_JOIN_TURNTABLE\tCannot join from a turntable, try to a turntable" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:34 msgid "MSG_JOIN_CORNU_SAME\tCannot Join; Selected endpoints are on same track." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:35 msgid "MSG_JOIN_SAME\tCannot Join; Selected endpoints are on same track." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:36 msgid "" "MSG_JOIN_NOTBEZIERORCORNU\tCannot Join Bezier or Cornu track if Easement is " "not Cornu" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:37 msgid "" "MSG_SELECTED_TRACKS_PARALLEL\tCannot Join; Selected tracks are parallel." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:38 #, c-format msgid "" "MSG_PRMFIL_OPEN_NEW\tCannot open New Parameter File: FILENAME\tCannot open " "New Parameter File: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:39 msgid "MSG_LAYER_SEL_FROZEN\tCannot select a frozen layer" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:40 msgid "" "MSG_GRID_SHOW_SPACE_GTR_0\tCannot Show Grid; spacing must be greater than 0" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:41 #, c-format msgid "" "MSG_CANT_SPLIT_TRK\tCannot split TYPE track\tCannot split track of type %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:42 #, c-format msgid "" "MSG_CUSTMGM_CANT_WRITE\tCannot write to parameter file: FILENAME\tCannot " "write to parameter file: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:43 msgid "MSG_CARIMP_DUP_INDEX\tCar Index number duplicated." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:44 msgid "" "MSG_CONN_PARAMS_TOO_SMALL\tConnection parameters reset to minimum values." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:45 msgid "MSG_CONN_PARAMS_TOO_BIG\tConnection parameters reset to maximum values." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:46 msgid "MSG_CANT_PASTE\tCopy/Paste buffer is empty. There is nothing to Paste." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:47 msgid "" "MSG_TODSGN_CROSSOVER_TOO_SHORT\tCrossover length is too short. Correct..." "\tCrossover length is too short. Correct\n" "inappropriate value(s) and try again." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:48 msgid "MSG_CURVE_TOO_LARGE\tCurved track is too large." msgstr "MSG_CURVE_TOO_LARGE\tИзогнутый трек слишком большой." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:49 msgid "" "MSG_TODSGN_REPLACE\tDefinition name is already in use. Saving this..." "\tDefinition name is already in use. Saving this\n" "definition replaces the existing definition.\n" "\n" "Do you want to continue?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:50 msgid "MSG_SAVE_CHANGES\tDo you want to save the changes made to your Layout?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:51 msgid "" "MSG_CARIMP_DUP_COLUMNS\tDuplicate column headers found in Car Import file." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:52 msgid "MSG_EP_ON_PATH\tEndpoint already on Path." msgstr "MSG_EP_ON_PATH\tКонечная точка уже на пути." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:53 #, c-format msgid "" "MSG_UPGRADE_VERSION1\tFile version %ld is greater than supported...\tFile " "version %ld is greater than supported\n" "version %d. You need to upgrade %s\n" "to at least version %s." msgstr "" "MSG_UPGRADE_VERSION1\tВерсия файла %ld выше чем поддерживается...\tВерсия " "файла %ld выше чем поддерживается\n" "версия %d. Вам необходимо обновить %s\n" "до последней версии %s." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:54 #, c-format msgid "" "MSG_UPGRADE_VERSION2\tFile version %ld is greater than supported...\tFile " "version %ld is greater than supported\n" "version %d. You need to upgrade your\n" "version of %s" msgstr "" "MSG_UPGRADE_VERSION2\tВерсия файла %ld выше, чем поддерживается...\tВерсия " "файла %ld выше чем поддерживается\n" "версия %d. Вам необходимо обновить вашу\n" "версию %s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:55 #, c-format msgid "" "MSG_LAYOUT_LINES_SKIPPED\tWhile processing Layout file %s, %d lines were " "skipped because they were not recognized." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:56 #, fuzzy, c-format msgid "" "MSG_PARAM_UPGRADE_VERSION1\tFile version %ld is greater than supported..." "\tFile version %ld is greater than supported\n" "version %d. You need to upgrade %s\n" "to at least version %s." msgstr "" "MSG_UPGRADE_VERSION1\tВерсия файла %ld выше чем поддерживается...\tВерсия " "файла %ld выше чем поддерживается\n" "версия %d. Вам необходимо обновить %s\n" "до последней версии %s." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:57 #, fuzzy, c-format msgid "" "MSG_PARAM_UPGRADE_VERSION2\tFile version %ld is greater than supported..." "\tFile version %ld is greater than supported\n" "version %d. You need to upgrade your\n" "version of %s" msgstr "" "MSG_UPGRADE_VERSION2\tВерсия файла %ld выше, чем поддерживается...\tВерсия " "файла %ld выше чем поддерживается\n" "версия %d. Вам необходимо обновить вашу\n" "версию %s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:58 #, c-format msgid "" "MSG_PARAM_LINES_SKIPPED\tWhile processing Parameter file %s, %d lines were " "skipped because they were not recognized." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:59 msgid "" "MSG_MOVE_POINTS_OTHER_SIDE\tFrog angle prevents placement of points. Move " "points to opposite side of frog." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:60 msgid "MSG_NO_ROOM_BTW_TRKS\tInsufficient space between existing stall tracks." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:61 #, c-format msgid "" "MSG_JOIN_DIFFER_ELEV\tJoining tracks with differing elevations (N.NNN)" "\tJoining tracks with differing elevations (%0.2f)" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:62 msgid "MSG_TRK_DESC_NOT_VISIBLE\tLabel description is hidden" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:63 msgid "MSG_DESC_NOT_VISIBLE\tLabel descriptions not visible" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:64 msgid "MSG_OBJECT_TOO_SHORT\tLength of object is too short." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:65 #, c-format msgid "" "MSG_PRINT_MAX_SIZE\tMaximum allowed page size is W x H\tMaximum allowed page " "size is %s x %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:66 msgid "" "MSG_NO_PRINTER_SELECTED\tPlease select a printer from the Print Setup dialog." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:67 #, c-format msgid "" "MSG_PRMFIL_NO_CONTENTS\tNew Parameter File has no CONTENTS line: FILENAME." "\tNew Parameter File has no CONTENTS line: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:68 msgid "" "MSG_NO_CARS\tNo Cars are defined for the current scale....\tNo Cars are " "defined for the current scale.\n" "\n" "Do you want to use the Car Inventory dialog?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:69 msgid "" "MSG_NO_CARPROTO\tNo Car Prototypes are defined....\tNo Car Prototypes are " "defined.\n" "Load a Prototype definition file using the\n" "Parameter Files dialog or create a Prototype\n" "definition using the Car Prototype dialog." msgstr "" "MSG_NO_CARPROTO\tНеопределено ниодного типа вагона....\tНеопределено " "ниодного типа вагона.\n" "Загрузите типы вагонов из файла через Файл->Файлы параметров\n" "Parameter Files dialog or create a Prototype\n" "definition using the Car Prototype dialog." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:70 msgid "MSG_CARIMP_NO_DATA\tNo data present in Car Import file." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:71 msgid "MSG_PRINT_NO_PAGES\tNo pages selected for printing." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:72 msgid "MSG_NO_PATH_TO_EP\tNo path between Profile and selected endpoint." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:73 #, c-format msgid "" "MSG_PRMFIL_NO_MAP\tNo Parameter File Map for CONTENTS\tNo Parameter File Map " "for %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:74 msgid "MSG_NO_SELECTED_TRK\tNo track(s) selected!" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:75 msgid "" "MSG_NO_EMPTY_LAYER\tNo layer was found that has no contents, so the module " "can not be imported" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:76 msgid "" "MSG_NO_UNFROZEN_LAYER\tNo layer was found that wasn't frozen. Layer 0 is " "unfrozen." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:77 msgid "" "MSG_NOT_UNFROZEN_LAYER\tThe current layer was defined as frozen. It is now " "unfrozen." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:78 #, c-format msgid "" "MSG_NO_TURNOUTS_AVAILABLE\tNo Turnouts|Structures are available.\tNo %s are " "available." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:79 msgid "" "MSG_CARDESC_VALUE_ZERO\tNumeric values on the Car Description...\tNumeric " "values on the Car Description\n" "dialog must be greater than 0." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:80 msgid "MSG_MOVE_OUT_OF_BOUNDS\tObject has moved beyond room boundaries." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:81 msgid "" "MSG_PARALLEL_SEP_GTR_0\tParallel separation must be greater than 0, or the " "new guage must be different than the old." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:82 msgid "" "MSG_CARPART_DUPNAME\tPart Number for this Manufacturer already exists...." "\tPart Number for this Manufacturer already exists.\n" "\n" "Do you want to update it?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:83 #, c-format msgid "" "MSG_PLAYBACK_LISTENTRY\tPlayback: Cannot find list entry: NAME\tPlayback: " "Cannot find list entry: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:84 #, c-format msgid "" "MSG_PLAYBACK_VERSION_UPGRADE\tPlayback file version %ld is...\tPlayback file " "version %ld is\n" "greater than supported version %d\n" "You need to upgrade your version of %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:85 #, c-format msgid "" "MSG_DOMOUSE_BAD_OP\tPlayback: unknown action NNN\tPlayback: unknown action %d" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:86 msgid "MSG_MOVE_POINTS_AWAY_CLOSE\tPoints are to close to frog; move away." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:87 msgid "MSG_POLY_SHAPES_3_SIDES\tPolygons must have at least 3 nodes." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:88 msgid "MSG_POLY_MULTIPLE_SELECTED\tCan't delete multiple points at once" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:89 msgid "MSG_POLY_NOTHING_SELECTED\tNo Point on a Poly shape selected." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:90 msgid "" "MSG_CARPROTO_DUPNAME\tPrototype name already exists....\tPrototype name " "already exists.\n" "\n" "Do you want to update it?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:91 msgid "MSG_RADIUS_GTR_0\tRadius must be greater than 0." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:92 msgid "MSG_RADIUS_GTR_10000\tRadius must be less than 10000." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:93 msgid "" "MSG_RADIUS_TOO_BIG\tThe Circle or Helix will not fit within the layouts room " "parameters (Height and Width)." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:94 #, c-format msgid "" "MSG_RESCALE_TOO_BIG\tRescaled tracks do not fit within layouts room " "parameters...\tRescaled tracks do not fit within layouts room parameters\n" "(Height and width). The layouts room parameters should be\n" "set to at least %s by %s." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:95 msgid "" "MSG_CARIMP_MISSING_COLUMNS\tRequired column headers missing from Car Import " "file." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:96 #, c-format msgid "" "MSG_2ND_TRK_NOT_SEL_UNSEL\tSecond track must be selected|unselected\tSecond " "track must be %s." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:97 msgid "MSG_OUT_OF_BOUNDS\tSelected page is out of bounds." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:98 msgid "MSG_SEL_POS_FIRST\tSelect position prior to entering Text." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:99 msgid "" "MSG_CARPROTO_BADSEGS\tSelected shapes must define a rectangular area ..." "\tSelected shapes must define a rectangular\n" "area with length greater than height." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:100 msgid "" "MSG_TOO_FAR_APART_DIVERGE\tSelected tracks deviate too much or are too far " "apart from each other." msgstr "" "Выбранные треки слишком сильно отклоняются или находятся слишком далеко друг " "от друга." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:101 msgid "MSG_COMMAND_DISABLED\tSpecified command disabled." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:102 #, c-format msgid "" "MSG_SEGMENT_NOT_ON_PATH\tTrack segment N not on Path for Turnout\tTrack " "segment %d not on any Path for %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:103 msgid "MSG_SPLIT_POS_BTW_MERGEPTS\tSplit position between Turnout Points" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:104 msgid "MSG_SPLIT_PATH_NOT_UNIQUE\tSplit position not on unique path" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:105 #, c-format msgid "" "MSG_CARIMP_MISSING_DIMS\tThe following car has no dimensions and a...\tThe " "following car has no dimensions and a\n" "Car Part description can not be found.\n" "\n" "%s\n" "\n" "Do you wish to continue importing other Cars?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:106 #, c-format msgid "" "MSG_CARIMP_MISSING_PARTNO\tThe following car has no Part Number...\tThe " "following car has no Part Number\n" "\n" "%s\n" "\n" "Do you wish to continue importing other Cars?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:107 #, c-format msgid "" "MSG_CARIMP_IGNORED_COLUMN\tThe following column in the Car Import file will " "be ignored:...\tThe following column in the Car Import file will be " "ignored:\n" "\n" "%s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:108 msgid "" "MSG_CANT_MOVE_UNDER_TRAIN\tThe position of a turnout or turntable cannot be " "changed while occupied by a train." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:109 msgid "" "MSG_STRUCT_NO_STRUCTS\tThere are no structures to choose from in the " "structure...\tThere are no structures to choose from in the structure\n" "selection list. Please check your SCALE, select the\n" " menu to load a Parameter File or\n" "create a new Structure with the Group command." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:110 msgid "" "MSG_TURNOUT_NO_TURNOUT\tThere are no turnouts to choose from in the " "turnout...\tThere are no turnouts to choose from in the turnout\n" "selection list. Please check your SCALE, select the\n" " menu to enter a new turnout\n" "or select the menu to load a\n" "Parameter File" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:111 msgid "MSG_NO_UNCONN_EP\tThere are no unconnected end points for this track" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:112 #, c-format msgid "" "MSG_SPLITTED_OBJECT_TOO_SHORT\tThe resulting length of one track piece is " "shorter than the minimum length of %d." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:113 msgid "MSG_PULL_FEW_SECTIONS\tThere are too few sections in this loop." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:114 msgid "MSG_NO_REDO\tThere is nothing to redo!" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:115 msgid "MSG_NO_UNDO\tThere is nothing to undo!" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:116 msgid "MSG_TOOMANYSEGSINGROUP\tToo many track segments in Group." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:117 msgid "" "MSG_TOOMANYSEGSINGROUP2\tTrack segments appear too late in Group segment " "list." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:118 msgid "MSG_CANNOT_CHANGE\tTrack cannot be changed." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:119 msgid "MSG_POINT_INSIDE_TURNTABLE\tTrack endpoint is within turntable radius." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:120 msgid "" "MSG_MOVE_POINTS_AWAY_NO_INTERSECTION\tTrack intersection not possible; move " "points away from frog." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:121 #, c-format msgid "" "MSG_TRK_TOO_SHORT\tTrack is too short by N.NNN\t%strack is too short by %0.3f" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:122 #, c-format msgid "" "MSG_RADIUS_LSS_EASE_MIN\tTrack radius (N.NNN) is smaller than easement " "minimum (N.NNN).\tTrack radius (%s) is smaller than easement minimum (%s)." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:123 msgid "" "MSG_CANT_MODIFY_FROZEN_TRK\tTracks in a frozen layer cannot be modified." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:124 msgid "MSG_CANT_MODIFY_MODULE_TRK\tTracks in a module cannot be modified." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:125 msgid "" "MSG_SEGMENTS_DIFFER\tTurnout definition contains non-track segments...." "\tTurnout definition contains non-track segments.\n" "\n" "Do you want to include them in this update?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:126 msgid "MSG_TURNTABLE_DIAM_GTR_0\tTurntable diameter must greater than 0." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:127 #, c-format msgid "" "MSG_UNDO_ASSERT\tUndo assertion failure %s:%d...\tUndo assertion failure %s:%" "d\n" "Val = %ld(%lx)\n" "%s\n" "Please report this error to the XTrackCAD project development team at " "SourceForge." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:128 #, c-format msgid "" "MSG_PROG_CORRUPTED\tCritical file damaged!...\tCritical file damaged!\n" "\n" "%s is corrupt.\n" "\n" "Please reinstall software." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:129 #, c-format msgid "" "MSG_ENTERED_STRING_TRUNCATED\tThe entered text is too long. Maximum length " "is %d." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:130 #, c-format msgid "MSG_PT_IS_NOT_TRK\t[X Y] is not a track\t[%s %s] is not a track." msgstr "MSG_PT_IS_NOT_TRK\t[X Y] это не трек\t[%s %s] это не трек." #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:131 msgid "" "MSG_BITMAP_SIZE_WARNING\tYou have specified a large bitmap....\tYou have " "specified a large bitmap.\n" "\n" "Are you sure you want to continue?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:132 msgid "Icon Size change will take effect on next program start." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:133 #, fuzzy, c-format msgid "Are you sure you want to delete these %d car(s) from your inventory?" msgstr "Вы уверены, что хотите удалить %d этих машин?" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:134 #, c-format msgid "" "Cannot open %s file:\n" "%s:%s" msgstr "" "Невозможно открыть файл %s:\n" "%s:%s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:135 #, fuzzy, c-format msgid "Cannot create directory: %s - %s" msgstr "Невозможно создать %s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:136 #, fuzzy, c-format msgid "Cannot open directory: %s" msgstr "" "Невозможно открыть файл %s:\n" "%s:%s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:137 #, c-format msgid "Path for deletion is not a directory: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:138 #, c-format msgid "Open failed for directory: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:139 #, c-format msgid "Can't add directory record %s to zip - %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:140 #, c-format msgid "Can't add file record %s to zip at %s - %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:141 #, fuzzy, c-format msgid "Can't create zip %s - %s" msgstr "Невозможно создать %s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:142 #, c-format msgid "Close failure for zip %s - %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:143 #, c-format msgid "Rename failure for zip from %s to %s - %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:144 #, c-format msgid "Open failure for zip %s - %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:145 #, c-format msgid "Index failure for zip %s - %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:146 #, c-format msgid "Open read file failure %s %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:147 #, c-format msgid "Open file in zip failure %s %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:148 #, c-format msgid "Unlink failed for: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:149 #, c-format msgid "Remove Directory failed for: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:150 #, c-format msgid "Cannot save archive to %s from directory: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:151 #, c-format msgid "Cannot save manifest file to %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:152 #, fuzzy, c-format msgid "Cannot open manifest file %s" msgstr "" "Невозможно открыть файл %s:\n" "%s:%s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:153 #, c-format msgid "Cannot unpack file: %s for file: %s in directory: %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:154 #, fuzzy, c-format msgid "Cannot open file %s" msgstr "" "Невозможно открыть файл %s:\n" "%s:%s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:155 #, c-format msgid "Cannot copy file %s into directory %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:156 #, c-format msgid "Unrecognized Option: %s" msgstr "Нераспознанная опция: %s" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:157 #, c-format msgid "" "End-Of-Line is unexpected in a quoted field.\n" "%s\n" "\n" "Do you want to continue reading the file?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:158 #, c-format msgid "" "A comma was expected after this quoted field.\n" "%s\n" "\n" "Do you want to continue reading the file?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:159 #, c-format msgid "" "Error \\\\\"%s\\\\\" occurred while writing %s.\n" "Please check disk space and system status." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:160 #, c-format msgid "" "At least one path for the Turnout T%d does not\n" "terminate on an endpoint. Such a track cannot be grouped.\n" "The track has been unselected." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:161 msgid "inv-pathEndTrk on Path." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:162 msgid "inv-pathStartTrk on Path" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:163 #, c-format msgid "%s:%d- %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:164 msgid "pathEndTrk not on Path." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:165 msgid "pathStartTrk not on Path." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:166 msgid "" "The tracks cannot be connected together.\n" "\n" "Try changing some tracks for a closer fit\n" "or increase the Connection Angle value on\n" "the Preferences dialog." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:167 msgid "" "The tracks cannot be connected together.\n" "\n" "Try changing some tracks for a closer fit\n" "or increase the Connection Distance and\n" "Angle values on the Preferences dialog" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:168 msgid "" "The tracks cannot be connected together.\n" "\n" "Try changing some tracks for a closer fit\n" "or increase the Connection Distance" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:169 msgid "" "The first track for the Align\n" "Rotate command must be Selected." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:170 msgid "" "The second track for the Align\n" "Rotate command must be Unselected." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:171 msgid "Too many selected tracks, drawing tracks as End Point." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:172 msgid "Select an endpoint between two tracks." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:173 msgid "" "According to values that have been entered the diverging\n" "track does not connect with the tangent track. Please\n" "check the values entered and try again. Check the angle\n" "is entered as a frog number or in degrees as specified\n" "by Angle Mode radio buttons." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:174 msgid "Moved before the end of the turnout" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:175 msgid "" "The Coupled Length must be greater than the Car Length,\n" "and the Coupler Length must be greater than 0." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:176 msgid "" "The Car Length value must be greater\n" "than the Car Width value." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:177 msgid "" "The specified Index is already in use.\n" "The Index will be updated to the next available value." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:178 msgid "" "You have changed values for this object.\n" "\n" "Are you sure you want to Close?" msgstr "" "Имеются несохранённые изменения этого объекта.\n" "\n" "Вы уверены, что хотите закрыть?" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:179 #, c-format msgid "" "File version %ld is lower than the minimum\n" "supported version %d. You need to update your\n" "layout file using an older version of %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:180 #, c-format msgid "" "File version %ld is lower than the minimum\n" "supported version %d.This parameter file will only work using an older " "version of %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:181 #, c-format msgid "" "%s cannot read the demo file:\n" "%s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:182 #, c-format msgid "doDemo: bad number (%d)" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:183 msgid "Playback TIMEEND without TIMESTART" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:184 #, c-format msgid "" "Unknown playback command (%d)\n" "%s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:185 #, c-format msgid "" "Playback file version %ld is lower than the\n" "minimum supported version %d.\n" "You need to update your layout file using an\n" "older version of %s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:186 #, c-format msgid "" "MSG_BAD_SCALE_INDEX\tScale index (NNN) is not valid. Do you want use the " "current layout scale (SCALE)? Or create an \"Unknown\" scale? See 'Help|" "Recent Messages' for details.\tScale index (%d) is not valid.\n" "Do you want use the current layout scale (%s)?\n" "Or create an \"Unknown\" scale?\n" "See 'Help|Recent Messages' for details." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:187 #, c-format msgid "" "MSG_BAD_SCALE_NAME\tScale \"SCALE1\" is not valid. We will substitute a " "dummy scale based on \"SCALE2\". See 'Help|Recent Messages' for details." "\tScale \"%s\" is not valid. We will substitute a dummy scale based on \"%s" "\".\n" "See 'Help|Recent Messages' for details." msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:188 msgid "Cannot extend a helix" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:189 msgid "Cannot trim a helix" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:190 msgid "Ignore further audit notices?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:191 #, c-format msgid "%s" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:192 msgid "Audit Abort?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:193 msgid "Write Audit File?" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:194 #, c-format msgid "checkTrackLength: Short track length = %0.3f" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:195 #, c-format msgid "checkTrackLength: unknown type: %d" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:196 #, c-format msgid "connectTracks: T%d[%d] T%d[%d] d=%0.3f a=%0.3f" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:197 #, c-format msgid "GetAngleAtPoint: bad type(%d) for T(%d)" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:198 #, c-format msgid "joinTracks: invalid track type=%d" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:199 #, c-format msgid "resolveIndex: T%d[%d]: T%d doesn\\\\'t exist" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/help/messages.h:200 msgid "Moved beyond the end of the track" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:1 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:8 msgid "" "XTrackCAD provides demonstrations on most of the program's features. The " "demos can be run by clicking on the Help menu on the Main window and then " "selecting Demos." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:3 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:10 msgid "" "The notation \"Menu|Item\" is used in the documentation (and the on-line " "demos and tips) to indicate the selection of a menu item.\n" "For example, \"File|Open\" means to open the menu by clicking on File on the " "menu bar of the Main window and then selecting the Open item from that menu." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:6 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:12 msgid "" "Set your modeling scale on the \"Options|Layout\" dialog. This controls the " "Turnouts and Structures that are available, Easement values and track gauge." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:8 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:14 msgid "" "A number of example layouts are provided. These files can be accessed by " "\"Help|Examples\"." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:10 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:16 #, fuzzy msgid "" "When installed, the length units are set based on your contry: inches for " "United States or Canada and centimeters elsewhere. You can change this on " "the \"Options|Preferences\" dialog by choosing between Metric and English." msgstr "" "После первой установки программа измеряет все расстояния в дюймах. Вы можете " "изменить это в разделе меню \"Настройки/Предпочтения\" поменяв систему на " "метрическую." #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:12 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:18 msgid "" "You can change the overall size of your layout on the \"Options|Layout\" " "dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:14 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:20 msgid "" "When installed, the default command is the Select command. You might want to " "change this to the Decribe command. You can do this on the \"Options|" "Command Options\" dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:16 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:22 msgid "" "When Selecting tracks, the connection between Selected and Unselected tracks " "is marked by a Red X. This indicates points where the connection between " "tracks will be broken if you Move or Rotate the Selected tracks." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:18 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:24 msgid "" "You can change orientation of the pages on the Print command by moving or " "rotating the Print Grid.\n" "Shift-Left-Drag moves the grid and Shift-Right-Drag rotates the grid." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:21 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:26 msgid "" "You can add track to any unconnected End-Point with the Modify command.\n" "Hold down the Shift key and click on the End-Point and drag away to create a " "new track segment attached to the End-Point.\n" "Repeat with the new End-Point to create flowing tracks." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:25 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:28 msgid "" "You can create curved tracks in four ways by dragging from:\n" " the 1st endpoint in the direction of the curve\n" " center of the curve to the 1st endpoint\n" " endpoint to the center\n" " the 1st to 2nd endpoint\n" "Then drag on one of the Red arrows to create the final shape of the curve.\n" "\n" "You can click on the small button to the right of the Curve command button " "to change the method." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:34 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:30 msgid "" "When creating a straight or a curved track by dragging from the 1st End " "Point, you can snap the new track to an existing open end point by holding " "down Shift while you click.\n" "The new track will be joined to the old when you create it." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:37 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:32 msgid "" "Track Circles provide a quick way to see what arrangement of tracks will fit " "in your layout spaces. Create Circles with your typical radius and place " "them in corners and other locations where your main-line will make changes " "of direction. This will give you an overall idea of how your layout will " "look.\n" "\n" "You can create Circles by:\n" " using a fixed radius\n" " dragging from the Center to edge\n" " dragging from an edge to the Center\n" "You can click on the small button to the left of the Circle command button " "to change the method." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:45 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:34 msgid "" "Easements (spiral transition curves) are used when track changes from " "straight to curved by gradually changing the radius. This improves " "operation and appearance.\n" "Easements are created with Joining or Extending Tracks.\n" "The Easement dialog is used to control easements." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:49 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:36 msgid "" "\"Help|Recent Messages\" shows the last error and warning messages that were " "generated by the program. Also an explanation of each message is displayed." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:51 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:38 msgid "" "When creating stall tracks for a turntable, you usually want the the stall " "tracks to be spaced evenly.\n" "The \"Turntable Angle\" item on \"Options|Preferences\" dialog can be used " "specify the minimum angle between stall tracks." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:54 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:40 msgid "" "XTrackCAD periodically saves the current layout in a check point file. The " "'Check Point' item on the 'Options|Preferences' dialog controls how often " "the file is saved.\n" "You can recover your working file after a system crash by copying the " "checkpoint file (xtrkcad.ckp in the XTrackCAD Working directory) to file.xtc" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:57 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:42 msgid "" "The Parallel command is helpful to layout yards and sidings. If the " "Parallel track abuts with an existing track, it is automatically connected." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:59 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:44 msgid "" "You can use Shift-Drag in Select command to move and rotate selected " "tracks.\n" "Shift-Left-Drag moves tracks and Shift-Right-Drag rotates them.\n" "Control-Left-Drag can move labels." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:63 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:46 msgid "" "You can move and rotate the Snap Grid to align with existing track or " "benchwork." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:65 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:48 msgid "" "Use the Parts List command to measure track length.\n" "Select the tracks you want to measure and then click on the Parts List " "button. The report will list the total of length of the selected flex-" "track. You will have to add in the length of any Turnouts." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:68 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:50 msgid "" "The length of flex-track attached to each Turnout is displayed on layout " "near the end-points of the Turnouts.\n" "Make sure 'Lengths' option of the 'Label Enable' toggle button on the " "Display dialog is selected." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:71 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:52 msgid "" "The Profile command can be used to find the length of a continous section of " "track.\n" "Select the track at the beginning and end of the section. The total length " "of track will be displayed on the Profile window in the lower right corner.\n" "Note: the Profile selects the shortest path between the two selected tracks, " "which might not be the path you are interested in. In this case, select the " "first track and then select other tracks along the path." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:75 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:54 msgid "" "Layers can be used to contain different groups of tracks or other features. " "You might use one layer for the main-line, another of staging tracks and " "another of benchwork.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:77 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:56 msgid "" "You can give each layer a name (by using the \"Manage|Layer\" dialog). This " "name will be displayed as the Balloon Help for the corresponding Layer " "button, if you have Balloon Help enabled on the \"Options|Display\" dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:79 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:58 #, fuzzy msgid "" "You can remove groups of buttons or the Hot Bar from the Main window to give " "you more room if you are not using some features. Also, the number of Layer " "buttons displayed is controlled by the \"Manage|Layers\" dialog." msgstr "" "Вы можете удалить группы кнопок или панель с главного окна, чтобы освободить " "больше места, если вы не используете некоторые функции. Также, кол-во кнопок " "переключения слоёв можно настроить в меню Слои." #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:81 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:60 msgid "" "The size of the map window is controlled by the overall size of the room " "(specified on the layout dialog) and the map scale (on the display dialog). " "You can make the Map window larger (or smaller) by decreasing (or " "increasing) the map scale.\n" "XTrackCad will prevent you from making the map window too small or too large." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:84 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:62 msgid "" "You can unload parameter files you are not using by the Parameter Files " "dialog. This removes unused Turnout and Structure definitions from the Hot " "Bar and makes the program start faster." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:86 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:64 msgid "" "Right-Click on the Main window displays a menu list of commands as an " "alternative to pressing the buttons on the tool bar or using the menu " "accelerator keys." msgstr "" "Если кликнуть правой кнопкой мыши на главном окне, то отобразится меню со " "списком команд аналогичным кнопкам в панели инструментов или в \"горячих " "клавишах\"." #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:87 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:66 msgid "" "Holding down the Shift key while you Right-Click will display options for " "the current command (if any)." msgstr "" "Если зажать клавишу Shift когда вы нажимаете правой кнопкой мыши, то " "отобразится список опций для текущий команды (если существует)." #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:89 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:68 msgid "" "Right-Click on the Hot Bar displays a menu of the different groups of " "objects which you can use to jump to the group you are interested in.\n" "Pressing a numeric key (1-9 and 0) moves the Hot Bar to corresponding " "position (1 is the start, 5 is half way, 0 is the end)." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:92 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:70 msgid "" "Right-Drag on the Map window sets the origin and scale of the Main window.\n" "The Main window will be centered on the spot where you started the Draw and " "how far you Drag will control how large an area you can see on the Main " "window." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:95 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:72 msgid "" "To refresh the Main window, press Control-L (hold down the 'Ctrl' key and " "then press the 'l' key)." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:97 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:74 msgid "" "The File menu contains a list of the last 5 layouts you were working on." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:99 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:76 msgid "" "The Print command can optionally print lines representing the roadbed for " "all tracks. This is useful when printing full size (1:1) for cutting " "roadbed." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:101 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:78 msgid "" "Pressing the 'Esc' key cancels the current command and invokes the default " "command, (which is either Describe or Select)." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:103 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:80 msgid "" "When moving or rotating tracks on slow machines or with a large number of " "tracks, you can improve performance by changing the way tracks are drawn " "while being moved.\n" "Shift-Right click will display a menu containing options to draw tracks " "normally, as simple lines or just draw end-points." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:106 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:82 msgid "" "The colors of different parts of the Main window can be changed with the " "Colors dialog. In particular, the Snap Grid color can be changed to make it " "more visible when printed." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:108 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:84 msgid "" "By default objects are drawn in their normal colors. Tracks will be drawn " "in Black. Objects can also be drawn in the color according to their Layer. " "The color of a Layer is displayed on the corresponding Layer button.\n" "The Display dialog 'Color Layers' item has separate toggles for Tracks and " "non-Tracks." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:111 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:86 msgid "" "Each Layer can be drawn or hidden by the 'Visible' toggle on the Layers " "dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:112 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:88 msgid "" "Short cut Layer buttons can also be displayed on the tool bar for up to the " "first 20 layers.\n" "This buttons allow to Show or Hide the layers." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:115 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:90 msgid "The name of the Layer is the Balloon Help for the Layer button." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:117 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:92 msgid "" "The playback speed of the Demos can be changed by using Speed drop down list " "on the Demo window." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:119 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:94 msgid "" "Many of the commands and dialogs can be invoked by special key combinations " "called Menu-Accelerators. These are listed on the Menus next to the command " "name. For example, Control-P will invoke the Print command." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:121 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:96 msgid "" "The Connect command is used to join Sectional track pieces that don't quite " "fit together.\n" "This command works by adding small gaps between other tracks to move the " "selected End-Points closer together." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:124 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:98 msgid "" "To copy a group of objects: Select the objects, press Control-c (or select " "Copy from the Edit menu), press Control-v (or select Paste from the Edit " "menu).\n" "The selected tracks will be copied to the layout and you can Move or Rotate " "them into position." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:127 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:100 msgid "" "In the Rotate (or Select) commands you can press Shift-Right-Click to " "display the Rotate menu which allows you to rotate the selected objects by a " "specific angle." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:129 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:102 msgid "" "You can use the Move-To-Join option of the Join command (hold down the Shift " "key) to move a group of Selected tracks to attach with some unselected End-" "Point." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:131 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:104 msgid "" "The Price List dialog (on the File Menu) is used to specify the prices of " "each type of Turnout, Sectional Track and Structure. Also, the length and " "price of flex-track pieces can be specified for each scale.\n" "This values will be used on the Parts List report to generate total cost of " "the selected objects." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:134 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:106 msgid "" "Areas of water can represented by a Polygon (use the Draw command) of the " "appropiate color.\n" "By using the Modify command, you can move, add or remove corners of the " "Polygon to fit the shape of the water.\n" "You use the Below command to place the Polygon below (or behind) other " "objects.\n" "\n" "You can also use a Polygon to represent aisles." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:140 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:108 msgid "" "When you create Benchwork you can move it below other objects by Selecting " "the Benchwork and use the Below command.\n" "Also, put Benchwork in a separate Layer so you can hide it if desired." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:143 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:110 msgid "" "You can enter Distances and Lengths using any format regardless of the " "Length Format on the Preferences dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:144 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:112 msgid "" "You can enter Metric values when English is the default Units and vice versa." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:146 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:114 msgid "" "When entering Distances and Lengths you can press the '=' key to redisplay " "the value in the default format." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:147 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:116 msgid "" "You can also press the 's' key to convert a Prototype measurement to a Scale " "measurement by dividing by the ratio for the current scale." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:148 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:118 msgid "" "The 'p' key will convert a Scale measurement to a Prototype measurement." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:150 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:120 msgid "" "You can place cars on the layout using the Train Simulation command to check " "clearance points, track to track separation and coupling." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:152 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:122 msgid "" "Use the MoveTo button on the Custom Management dialog to move your custom " "Turnout, Structure and Car definitions to a .XTP parameter file." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:154 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:124 msgid "" "If you are printing multiple pages on a continuous feed printer (such a Dot " "Matrix) you can change the Page Order if necessary to print pages out in " "proper order." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:156 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:126 msgid "" "On the Car Item and Car Part dialogs, you can enter custom values for " "Manufacturer, Part and Road by typing the new value directly into the Drop " "Down List." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:158 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:128 msgid "" "On the Car Item dialog, you can change the Road, Number, Color and other " "values for a Car. This is useful if you repaint or renumber a car. \n" "You can also change the Coupler Mounting and Coupler Length if you change " "the couplers." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:161 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:130 msgid "" "You can Export your Car Inventory to a file in Comma-Separated-Value format " "which can be read by most spread-sheet programs." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:163 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:132 msgid "Use the Train Odometer to measure distances along the track." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:165 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:134 msgid "" "Holding down the Shift key when clicking the Zoom In or Zoom Out button will " "zoom to a programmed Drawing Scale. \n" "Holding down the Shift and Control keys when clicking a Zoom button will set " "it's program Zoom to the current Drawing Scale." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:168 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:136 msgid "" "You can trim the ends of turnouts by holding down the Shift key when using " "the Split command." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:170 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:138 msgid "" "The Split command can be used to create Block Gaps at end points between two " "tracks. \n" "Either rail or both rails can be gapped, which are drawn as thick lines." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:173 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:140 msgid "" "Trains will 'crash' if they hit another car when travelling faster than the " "'Max Coupling Speed' (on the Command Options dialog). \n" "They will also 'crash' if they hit the end of the track or an open " "turnout. \n" "Crashed trains must be manually moved back onto the track." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:177 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:142 msgid "" "You can add new track segments to a turnout definition or create a " "definition from individual tracks using the Group command." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:179 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:144 msgid "" "The center point and radius of Curved and Circle tracks can optionally be " "drawn. \n" "This feature is toggled by using the Move Label command and doing a Shift-" "Left-Click on the track." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:182 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:146 msgid "" "Turnout, Curved and Helix track labels can be individually turned on and off " "by doing a Shift-Right-Click on the track when using the Move Label command." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:184 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:148 msgid "" "You can use the Describe command to change the font size of Text objects." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:186 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:150 msgid "" "You can use the Describe command to change the size of Dimension Line labels." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:188 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:152 msgid "" "Normally Right-Click displays a popup menu of commands and Shift-Right-Click " "displays options for the current command. \n" "This can reversed by using the Right Click toggle button on the Command " "Options dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:191 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:154 msgid "" "The Align item on the Rotate command options menu will let you Align " "selected objects with any unselected object. \n" "The selected objects are rotated so the first point is parallel to the " "second point you selected." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:194 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:156 msgid "" "Print To Bitmap allows you to print the track center line. \n" "This is useful if you later print the bitmap full size as a template when " "laying track." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:197 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:158 msgid "" "You can export the selected tracks to a DXF file which can be read by most " "CAD programs." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:199 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:160 msgid "" "Lengths and distances can be displayed in a variety of units and formats " "such as 1' 10 3/4\", 1ft 10.75in or 22.750. In Metric mode, distances can " "be displayed as millimeters, centimeters or meters. See the Length Format " "item on the Preferences dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:201 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:162 msgid "" "Tracks that are too steep or curve too tightly are drawn in the Exception " "color (Yellow by default). \n" "This helps to identify potential problem areas. \n" "The maximum grade and minimum radius are set on the Preferences dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:205 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:164 msgid "" "The Flip command produces a mirror-image of the selected tracks. \n" "If possible, right-hand turnouts are relabeled as left-hand turnouts (and " "vice versa)." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:208 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:166 msgid "" "Then Ungroup command will break turnouts and structures into individual " "track, line and shape segments. \n" "You can modify each segment and add new ones. \n" "Then use the Group command to update the definition." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:212 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:168 msgid "Dimension lines show the distance between two points." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:214 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:170 msgid "" "A variety of Benchwork (rectangular, L-girder and T-girder) can be drawn. \n" "Use the Below command to move the Benchwork below the track for proper " "display." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:217 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:172 msgid "" "The Turnout Designer dialogs allow you to specify the width of any attached " "roadbed. \n" "As well, the color and thickness of the lines used to represent the roadbed " "can be specified." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:220 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:174 msgid "" "The Color dialog (on the Options menu) is used to change the color of " "different objects on the display. \n" "You can change the color of the Snap Grid and Borders, as well as Normal, " "Selected and Exception tracks." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:223 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:176 msgid "" "You can set the elevation (height) of track end-points. \n" "Elevations of intermediate end points can be computed automatically based on " "the distance to the nearest end points with defined elevations. \n" "Grades can also be displayed at selected end points. \n" "Please see the Elevations help and demo." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:228 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:178 msgid "" "Once you have elevations on some endpoints, you can use the Profile command " "to produce an elevation graph. \n" "The graph shows the selected elevations, grades and distances. \n" "Please see the Profile help and demo for details." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:232 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:180 msgid "" "You can draw tracks with wider lines for rails. \n" "Select the tracks and use Medium or Thick Tracks on the Edit menu." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:235 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:182 msgid "" "The Helix command is used to create a Helix track. \n" "You specify some parameters: height, radius, number of turns, grade and " "vertical separation between layers. \n" "These values are interrelated so changing one value will affect ohers. \n" "Then you can place the Helix and join to other tracks as you would a Circle " "track." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:240 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:184 msgid "" "Many objects on the layout have labels: Turnouts/Helix/Curved Titles, Track " "Lenghts, End-Point Elevations, Track Elevations and Cars. \n" "You can turn these labels on or off with the Label Enable toggle buttons on " "the Display options dialog." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:243 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:186 msgid "" "If you hold down the Control key when using the Rotate command, the rotation " "will be done in increments of 15ï¿œ." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:245 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:188 msgid "" "When using the Rotate command, Shift-Right-Click displays a menu allowing " "you to rotate by specific amounts or to align the selected objects with " "another object." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/help/xtrkcad.tip:247 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:190 msgid "" "This is last tip. If you have any additions or comments, please let us know." msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:25 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:192 msgid "" "The unconnected endpoints of a straight or curved track can be changed with " "the 'Modify Track' command.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:31 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:194 msgid "" "The endpoint of a straight track is selected and then Left-Dragged to change " "its length. A blue anchor shows that the length can be extended.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:48 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:196 msgid "" "If you try to drag the selected endpoint beyond the far endpoint, the track " "extends in the opposite direction.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:68 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:73 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:199 msgid "" "A curved track is selected and it's new endpoint is determined by the angle " "to the cursor. \n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:105 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:201 msgid "It's possible to almost create a complete circle.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:202 msgid "" "If you drag the mouse beyond the start of the curve the track becomes very " "short.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:114 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:204 msgid "Here you are warned that the track will be too short.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:121 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:206 msgid "" "Because the modified track is too short, the modification is abandoned the " "original track is restored.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:158 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:208 msgid "" "If you move the cursor away from the curve, you will create a straight track " "tangent to the curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:180 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:185 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:211 msgid "" "If you adjust the endpoint of a turnout or sectional track the track is " "extended by a similar track segment. The extension can be a straight or a " "curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:200 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:205 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:214 msgid "" "You can change the radius of a straight or curved track that is connected at " "one endpoint by holding down the Shift key while Left-dragging on it.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:215 msgid "" "The blue cross anchor shows that this is possible when shift is held down " "with no buttons.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:219 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:217 msgid "" "This lets you change a straight track into a curved track (and vice versa) " "as well as changing the radius of a curved track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:262 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:219 msgid "" "You can form an extension of a straight or curved Track that is connected at " "one endpoint using an easement by holding down the Ctrl key while Left-" "dragging on it.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:220 msgid "" "The blue half cross anchor shows that this is possible when the Ctrl key is " "held down with no mouse button.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmadjend.xtr:277 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmbench.xtr:9 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:223 msgid "You can draw a variety of different types of benchwork:\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:224 msgid "- rectangular (1x2, 2x4 etc)\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:225 msgid "- L girders\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:226 msgid "- T girders\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:227 msgid "You can also draw them in different orientations.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmbench.xtr:25 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:229 msgid "We will draw two 3x6 inch L-girders.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmbench.xtr:43 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:231 msgid "" "The flange of the top L-Girders is on the outside edge of the girders. We " "want to change the girder so both flanges are on the inside.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:232 msgid "We will use the command for this.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmbench.xtr:54 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:234 msgid "Change the Orientation to Right.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmbench.xtr:63 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:236 msgid "Now both flanges are on the inside of the two girders.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:34 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:238 msgid "" "Pushing the button will cancel any other command in progress.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:239 msgid "" "Here we will begin to create a curved track which is a two step process.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:47 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:241 msgid "" "When we clicked on the button, the current command was " "cancelled.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:242 msgid "" "When in mode, selecting any object will print a description in " "the Status Bar and display a dialog showing properties of the clicked-on " "object.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:57 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:244 msgid "" "Certain parameters of the object can be changed. In this case we'll change " "the length\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:65 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:246 msgid "Let's look at the Turnout...\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:73 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:248 msgid "and change the turnout name and part no.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:84 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:250 msgid "You can change the contents of text...\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:93 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:252 msgid "and its size.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:100 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:254 msgid "" "If you select a note, the Description dialog appears which displays the " "contents of the note.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcancel.xtr:112 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcircle.xtr:7 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:257 msgid "" "Like the track command, there are several ways to create a Circle " "track.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:258 msgid "" "The first is to specify a fixed radius and simply drag the Circle into " "position.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:259 msgid "We will change the Radius before proceeding.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcircle.xtr:24 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:261 msgid "The next method is to drag from the edge of the Circle to the center.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcircle.xtr:37 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:263 msgid "" "The last is similar, but you drag from the center of the Circle to the " "edge.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcircle.xtr:50 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:157 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:266 msgid "" "We have built a siding using Sectional track and have 2 End-Points that " "don't line up and are not connected automatically when placing the sectional " "track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:162 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:268 msgid "" "We use the command to adjust neighboring tracks so the gap is " "closed.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:269 msgid "" "Note: the adjustments are only done on tracks which have only 1 or 2 " "connections. In this example the Turnouts would not be affected.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:175 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:271 msgid "And now the gap is closed.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:181 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:273 msgid "Other tracks have been shifted slightly to close the gap.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:188 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:275 msgid "You can see these slight mis-alignments.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:276 msgid "But they will have no effect when the layout is actually built.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:196 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:353 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:279 msgid "" "After working with Sectional track you might get to point where these mis-" "alignments have accumulated and you wish to remove them.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:280 msgid "" "You can remove these slight mis-alignments by tightening the tracks starting " "from a unconnected End-Point. Use Shift-Left-Click with the " "command.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:281 msgid "First use the command to disconnect the tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:363 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:283 msgid "" "Then with the command, Shift-Left-Click on the 2 End-Points.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn1.xtr:378 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn2.xtr:199 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:286 msgid "In example shows a simple figure-8 layout using Sectional track.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:287 msgid "" "You will notice that the tracks do not line up exactly in one location.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn2.xtr:211 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:289 msgid "" "We can use the command to move the connecting tracks slightly and " "connect the 2 End-Points.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn2.xtr:224 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:291 msgid "The two End-Points are now aligned and connected.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn2.xtr:231 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:293 msgid "The connection was made by adding small gaps in other tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmconn2.xtr:238 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:7 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:296 msgid "There are several ways to create a Curved track.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:297 msgid "" "You can choose which to use by clicking on the small button to the left of " " command button if the current Curve command is not the one you " "want.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:298 msgid "" "The first is by clicking on the first End-Point and dragging in the " "direction of the Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:20 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:300 msgid "" "You will see a straight track with a double ended Red arrow at the end.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:301 msgid "Click and drag on one of the Red arrows to complete the Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:39 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:303 msgid "" "The next method is to click at one End-Point and drag to the center of the " "Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:50 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:305 msgid "" "Now you will see the double ended Red arrow connected to the center of the " "Curve marked by a small circle.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:306 msgid "As before, drag on one of the Red arrows to complete the Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:63 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:308 msgid "" "The next method is similar to the last except that you drag first from the " "center of the Curve to one End-Point.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:80 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:310 msgid "Once again, drag on a Red arrow to complete the Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:90 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:312 msgid "" "The last method begins by drawing a line between the two End-Points of the " "Curve. This forms the Chord of the Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:108 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:314 msgid "Now drag on a Red arrow to complete the Curve.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmcrvtrk.xtr:118 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:112 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:317 msgid "This demo will construct a control panel for part of a bigger layout.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:117 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:319 msgid "For our control panel we will use ÂŒ\" lines. \n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:320 msgid "Also, we will use a 1/8\" grid to lay out our controls.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:321 msgid "" "First, we will set up the Snap Grid for 1\" grid lines and 8 divisions.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:132 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:323 msgid "Now, clear the layout and turn on the Snap Grid.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:147 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:325 msgid "First step: draw the lines representing the tracks.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:326 #, fuzzy msgid "We specify the line width in inches.\n" msgstr "Это список компонентов для проекта" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:327 msgid "" "To create a 1/4\" line, enter 0.250 in the \"Straight Line Width\" box at " "the bottom of the window.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:492 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:329 msgid "" "Notice how the Snap Grid keeps the main line and siding track parallel and " "the connecting tracks and spur at a 45° angle.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:500 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:331 msgid "Second step: add LEDs for the turnout position indicators.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:332 msgid "We will use T1 red and green LEDs.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:333 msgid "We will zoom in to show positioning.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:510 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:335 msgid "" "Notice that when we are in the correct position (on the 1/8\" grid), the " "Marker lines on the bottom and left rulers will high-light the tick marks. " "When both ticks are high-lighted, press the space bar to finalize the LED.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:555 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:337 msgid "Now we'll add push buttons to control the turnouts.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:592 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:339 msgid "Let's add signals to our siding.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:340 msgid "" "The entrance to the siding will be protected by double headed signals.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:341 msgid "We'll select a signal from the HotBar and place it into position.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:605 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:343 msgid "" "We rotate the signals by Shift-Right-Click and select 90° CW on the popup " "menu. We can not show the popup menu in demo mode, but will simulate the " "effect.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:654 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:345 msgid "The exits from the siding will be protected by single headed signals.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:708 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:347 msgid "Now for some touch-ups.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:348 msgid "Notice when the line meet at an angle there is a gap.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:349 msgid "We will fill this gap with the ÂŒ\" dot.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:350 msgid "" "Note: Win95/Win98/WinME does not support drawing lines with flat end-caps, " "but only with round end-caps.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:351 msgid "Users on those platforms will not see the gap.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:731 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:353 msgid "" "Add an arrow head to indicate the tracks that connect to the rest of the " "layout.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:354 msgid "The second arrow will be flipped 180°\"\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:769 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:356 msgid "And add some labels.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:830 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:358 msgid "" "We want to print our control panel onto a 8Âœx11 page, but the control panel " "is a bit too wide.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:359 msgid "Lets tighten it up a bit.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:360 msgid "" "First turn the Snap Grid on again so any moves we make will keep objects on " "the grid.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:839 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:362 msgid "Lets move the spur track to the left 3/4\"\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:861 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:364 msgid "Now move the right side of the siding over.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:881 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:366 msgid "Now, adjust the ends of the mainline and siding tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:901 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:368 msgid "And move the title over as well.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmctlpnl.xtr:918 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:370 msgid "Now you can print it.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:371 msgid "The cross-hairs on the LEDs and switch show the centers for drilling.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdelund.xtr:33 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:373 msgid "" "Pressing the button lets you delete selected tracks from the " "layout.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:374 msgid "" "First you select the tracks you want to delete, and then press the " "button.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdelund.xtr:47 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:376 msgid "" "If you delete a track connected to an easement curve, then the easement " "curve is deleted as well.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdelund.xtr:57 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:378 msgid "You can use the command to undelete tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdelund.xtr:67 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:380 msgid "" "If you Left-Drag on the layout you can select all tracks within an area.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:381 msgid "" "Note, only tracks within the selected area are deleted. Since the easement " "curve is connected to a deleted track, it is deleted as well.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdelund.xtr:80 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdialog.xtr:6 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:384 msgid "" "The demo also simulates entering values and selecting options on various " "dialogs.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:385 msgid "" "This is simulated by drawing a rectangle around the control when values are " "entered or changed.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdialog.xtr:13 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:387 msgid "" "Here we are going to make some changes to the Display dialog. Notice how " "this is simulated.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:388 msgid "First we are setting 'Draw Tunnel' to 'Normal'\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdialog.xtr:21 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:390 msgid "Now we're changing 'Label Font Size' to '56'\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdialog.xtr:26 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:392 msgid "We'll change some other options\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdialog.xtr:38 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:394 msgid "" "This effect is only used in demonstration mode. During normal operation you " "will not see this.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdialog.xtr:45 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdimlin.xtr:117 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:397 msgid "Dimension Lines are used to mark the distances between two points.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:398 msgid "" "Here we will create a Dimension Line to show the separation between two " "tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdimlin.xtr:132 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:400 msgid "" "We might also want to measure the distance between two structures. In this " "case we will use a larger dimension line.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdimlin.xtr:144 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:402 msgid "" "We can use the command to change the position of the Dimension " "Line and the size of the numbers.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmdimlin.xtr:162 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:14 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:405 msgid "" "This example will show the effect of using easements while joining tracks.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:406 msgid "First, we will enable Cornu Easements and select Join\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:28 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:408 msgid "First select one end of the track\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:39 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:410 msgid "Now the end of different track\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:49 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:412 msgid "You can reposition the ends by dragging them \n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:65 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:414 msgid "When you are happy, Hit Enter or Space, if not use Esc\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:73 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:416 msgid "" "The Curve is made up of Beziers parts that smooth the shape the best way it " "can be in the space available\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:87 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:418 msgid "Now, we'll show traditional easements instead.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:142 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:420 msgid "" "We've selected sharp easements. The minimum radius curve we can use will be " "9.75\"\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:421 msgid "Notice the label on the Easement button has changed to 'Sharp'.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:157 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:423 msgid "" "Note the connecting curve does not quite meet the straight tracks. This the " "'Offset'.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:165 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:425 msgid "Here the connecting curve is too small.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmease.xtr:175 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:427 msgid "" "The connecting curve is made of three tracks, the curve and two easement " "segments on each end.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:112 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:429 msgid "" "We have designed part of the layout with a siding, 2 branches and a spiral " "loop. We want to set elevations.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:430 msgid "Note: make sure you set endpoint elevations on the Display dialog.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:122 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:432 msgid "First we will set elevations at the end of the branches.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:132 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:434 msgid "We'll select the end of the top branch and set the Elevation to 4\"\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:435 msgid "First, click on the End-Point.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:142 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:437 msgid "Next, pick Defined on the Elevation dialog Radio box.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:148 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:439 msgid "And set the Elevation to 4.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:156 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:441 msgid "Now, select the other branch and set it's elevation to 2\"\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:170 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:443 msgid "We can move the Elevation label by using Ctrl-Left-Drag\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:182 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:445 msgid "Now, we set the Elevation at one end of the Siding.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:209 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:215 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:448 msgid "We want to find the elevations where the 2 tracks cross.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:224 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:450 msgid "We picked an End-Point on the upper track.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:451 msgid "" "XTrackCAD has computed the Elevation (2.33\") at this point based on the " "Elevation at the siding and a combination of the of the first Elevations.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:452 msgid "" "We create a Computed Elevation here that will be automatically adjusted " "whenever the other Elevations are changed.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:243 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:454 msgid "" "The Compute Elevation is based on Elevations at end of both of the " "branches. We may want to base the Elevation on only one branch. For " "example if one branch was the mainline we don't want the other branch " "affecting this Computed Elevation.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:455 msgid "We do this by Ignoring the branch we don't want.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:456 msgid "We'll ignore the lower branch.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:258 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:458 msgid "" "Notice at the endpoint where the tracks cross, we see the elevation has " "changed from 2.33 to 2.64.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:264 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:460 msgid "Now we want to know the elevation of the lower track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:274 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:462 msgid "There is no endpoint on the lower track here.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:463 msgid "" "Use Shift-Left-Click to Split the track and create an endpoint we can use " "for an elevation,\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:287 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:465 msgid "and create another Computed Elevation point.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:302 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:467 msgid "Now we want to label the grade on this section of track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:311 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:469 msgid "" "Again, since there is no endpoint nearby, we split the track to create an " "endpoint we can use,\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:321 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:471 msgid "and create a grade marker.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:335 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:473 msgid "Note the marker has an arrow pointing in the upwards direction.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:344 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:475 msgid "" "The last thing we want to do is to create a Station label that we'll use in " "the command.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:358 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:477 msgid "Now, set the Elevation to Station and enter the its name.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmelev.xtr:376 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmexcept.xtr:31 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:480 msgid "" "XTrackCAD can help find tracks that are curved too sharply or are too " "steep. These tracks are Exception tracks and are drawn in the Exception " "track color.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:481 msgid "" "In this example we have a curved track with radius of 9 inches and a " "straight track with a grade of 3.8 percent.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:482 msgid " \n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmexcept.xtr:39 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:484 msgid "" "The Layout dialog shows the Minimum Track Radius is 9 inches and the Maximum " "Track Grade is 5 percent.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmexcept.xtr:48 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:486 msgid "" "If we make the curved track sharper it will be drawn in the Exception " "color.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmexcept.xtr:61 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:488 msgid "" "If we make the straight track steeper it will also be drawn in the Exception " "color.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmexcept.xtr:78 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:490 msgid "" "You can change the Exception color on the Colors dialog from the Options " "menu.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmexcept.xtr:85 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmextend.xtr:21 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:493 msgid "" "The unconnected endpoint of any track can also be extended with the " "command using Right-Drag.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmextend.xtr:26 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:495 msgid "Select the endoint and Right-Drag.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmextend.xtr:34 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:497 msgid "The extending track can be straight...\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmextend.xtr:44 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:499 msgid "... or curved.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmextend.xtr:51 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:501 msgid "" "If you extend a straight or curved flex track and enable Easements then an " "Easement curve will be automatically generated when you extend the track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmextend.xtr:65 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:124 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:504 msgid "" "The command will create a mirror image of the selected objects.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:131 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:506 msgid "After selecting the object, drag a line which will form the mirror.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:140 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:508 msgid "The mirror line does not have to be vertical or horizontal.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:149 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:510 msgid "You can also flip any number of objects.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:511 msgid "Watch what happens to the structure and turnout titles.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:163 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:513 msgid "" "Note that the turnout title has been changed from the Medium Right to Medium " "Left. When turnouts are flipped, XTrackCAD will try to find a matching " "turnout and if found will change the name.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:170 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:515 msgid "" "Structures do not have Right and Left hand versions. Their title is changed " "to indicate that they were flipped.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:516 msgid "You can use the command to change their title.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmflip.xtr:187 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:21 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:519 msgid "" "The and commands (on the Tools menu) are a powerful way to " "manipulate Turnout and Structure definitions.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:520 msgid "We'll start with a simple turnout and add a switch machine.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:55 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:522 msgid "" "Now that we have drawn a rough outline of a switch machine we will group it " "with the turnout definition.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:523 msgid "First we Select the objects in the new definition.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:68 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:525 msgid "Now do the command.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:75 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:527 msgid "" "The command dialog shows the Title (Manufacturer, Description and " "Part Number) of the new definition. This information is taken from the " "Selected objects you are grouping.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:81 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:529 msgid "" "The 'Replace with new group?' toggle will replace the Selected objects with " "the new definition.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:88 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:531 msgid "" "If we don't change the Title then the new definition will replace the " "existing definition.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:532 msgid "We'll give this definition a new Description.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:99 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:534 msgid "We're done with this definition. Press Ok.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:106 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:536 msgid "You will see the updated image on the HotBar.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:113 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:538 msgid "" "The command replaces any Selected turnouts or structures with " "their parts.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:539 msgid "" "Structures and non-track segements of turnouts are composed of Lines, " "Circles and other shapes. In this turnout these are the two lines and the " "two squares.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:540 msgid "" "We will Ungroup this turnout and see how the individual parts can be " "changed.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:541 msgid "First Select the turnout and then Ungroup it.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:128 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:543 msgid "Notice that the Title now indicates the turnout is Ungrouped.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:544 msgid "Hit Escape to deselect everything.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:138 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:546 msgid "Now Select the lines and squares.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:163 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:548 msgid "" "We could modify these object or add new ones. For now we'll just delete " "them.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:170 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:550 msgid "And move the Label out of the way.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:181 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:552 msgid "Notice that the turnout has been broken into three parts.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:203 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:554 msgid "" "Two ends of the turnout, from the frog to the end of the diverging leg and " "from the points to the left, are now straight track sections.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:555 msgid "" "The a turnout is made of a number of individual straight and curved track " "segements. This turnout had four segments:\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:556 msgid " 1 a short straight segment to the left of the points\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:557 msgid " 2 a long straight segment to the right of the points\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:558 msgid " 3 a curved segment from the points to the frog\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:559 msgid "" " 4 a straight segment from the frog to the end of the diverging leg.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:560 msgid "The first and last segments have be converted to straight tracks.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:561 msgid "" "The second and third segments form the the body of the turnout and can not " "be ungrouped further.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:562 msgid "" "You can later Group this turnout with the straight segments to recreate the " "turnout definition. You can also add other track segments to turnout " "definitions.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:247 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:564 msgid "Now, create a track and place the new turnout on it.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:265 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:566 msgid "Now suppose we want to replace the black squares with green circles.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:567 msgid "First we Select the turnout.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:277 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:569 msgid "And now Ungroup it (from the Tools Menu)\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:282 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:571 msgid "" "Notice that the name has changed to indicate the turnout was Ungrouped.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:288 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:573 msgid "" "Now, hit escape to deselect everything and then Select the 2 squares and " "delete them.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:305 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:575 msgid "Now draw the green circles...\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:326 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:577 msgid "and Group the new definition.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:345 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:579 msgid "" "Notice that the turnout in the HotBar is angled the same as the turnout on " "the layout. Make sure your new definition is rotated the way you want it.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:384 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:581 msgid "We can also create turnouts from simple straight and curved tracks.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:582 msgid "We'll create two tracks that have a common endpoint.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:395 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:584 msgid "" "When we create the curve from the straight track endpoint we need to hold " "down the key to prevent XTrackCAD from trying to join the two " "tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:413 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:586 msgid "At this point we can modify the tracks if necessary.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:587 msgid "We will use the command to change the tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:425 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:589 msgid "We'll make the Length 7.5\".\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:590 msgid "" "If we change the Length, each End-Point will be moved to shorten the track. " "We want to just move the Right End-Point. To control this, change the Lock " "to First which means the Left End-Point will be unchanged when we change the " "length (or angle) of the track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:435 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:592 msgid "Now when change the Length only the Right End-Point will move.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:446 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:594 msgid "Now let's look at the curved track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:456 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:596 msgid "" "Here the Left End-Point (which we don't want to move) is the Second End-" "Point, so we'll make that the Lock.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:464 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:598 msgid "We want the curve to have a radius of 20\" and an angle of 17.5°.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:599 msgid "First change the Radius...\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:473 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:601 msgid "and the the Angular Length.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:481 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:603 msgid "Now Select both tracks...\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:497 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:605 msgid "and Group them.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:508 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:607 msgid "" "If the two tracks have a common End-Point then they will form a Turnout and " "can be switched with the command. Otherwise they will just be two " "track segments grouped together.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:515 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:609 msgid "" "We have created a left hand turnout and we also want a right hand version.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:610 msgid "We'll use the command.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:528 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:612 msgid "" "Drag a horizontal line that will be the mirror for the command.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:538 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:614 msgid "Notice the title has changed to Flipped Left.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:615 msgid "Now Group the turnout.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:547 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:617 msgid "We'll change the Title and Part No for the new defintion.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:560 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:619 msgid "" "To Remove the definitions, use the Custom Management dialog on the Tools " "menu.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:565 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:621 msgid "Select the definitions you added and Delete them.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmgroup.xtr:578 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:16 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:624 msgid "" "Now we will create a helix in the corner of the layout connected to 2 " "tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:28 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:626 msgid "" "We will be creating a helix with a Elevation Difference of 12 inches, Grade " "of 1.5 percent and limit the Vertical Separation to at least 2 inches.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:34 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:628 msgid "First set the Elevation Difference to 12\"\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:43 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:630 msgid "Next set the Vertical Separation to 2\"\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:631 msgid "Notice how this causes the number of Turns to be set to 6\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:52 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:633 msgid "Next set the Grade to 1.5 percent\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:634 msgid "Notice how this causes the Radius to change.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:60 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:636 msgid "" "Setting these values changes the Radius to 21.2\" and the number of Turns to " "6.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:66 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:638 msgid "" "Now we specify the Angular Separation between the enterance and exit to the " "helix.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:639 msgid "Note: this will decrease the Radius slightly.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:76 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:641 msgid "Next we can fine tune the helix by decreasing the Radius to 15\".\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:642 msgid "Note the change to the Grade.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:85 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:644 msgid "" "Lastly change the Vertical Separation to 2.5 inches. The number of Turns " "will change to 4 and the grade increase to almost 3 percent.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:645 msgid "" "Note: the Vertical Separation will be increased. This value is the " "Elevation Difference (12.0) divided by the total number of turns. The total " "number of turns is 4.25: 4 whole Turns plus a quarter turn for the Angular " "Separation.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:94 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:99 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:648 msgid "" "Now that the helix parameters are set we can place the helix on the layout.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:112 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:650 msgid "" "Next, join the 2 straight tracks to the helix in the same way we join to a " "circle.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:145 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:652 msgid "" "Notice that the length has increased because we have more than 4 turns in " "the helix. It is closer to 4.25 turns.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:155 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:654 msgid "" "Next, we assign elevations to the 2 End-Points of the helix. This will " "determine the grade and separation between the helix coils.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:655 msgid "" "Note: we could set the elevations anywhere along the connecting tracks " "instead. XTrackCAD treats a helix as a single length of track for " "elevations.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:176 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:657 msgid "" "We have set the elevations to 1 inch and 13 inches to produce a grade of 3.0 " "percent with 2.8 inches between coils.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:658 msgid "" "You can use the command to change the number of Turns or the " "Elevations at either end of the Helix. This will affect the Grade and " "Vertical Separation.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:184 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:660 msgid "The helix description can be moved by the command.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhelix.xtr:194 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:16 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:663 msgid "" "In addition to using the turnout definitions you can create 'Hand Laid " "Turnout'.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:664 msgid "This is two step process:\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:23 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:666 msgid "1 - click on the frog and drag away to set the frog angle\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:29 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:668 msgid "" " Hint: the further you drag from the frog, the more accurate the angle.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:34 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:670 msgid "2 - click and drag to set the position of the points\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:42 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:672 msgid "We can create Hand Laid Turnouts on curved tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:58 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:674 msgid "A Hand Laid Turnout is composed of several parts.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:67 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:676 msgid "The actual Turnout is a short portion at the points.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:77 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:678 msgid "The other parts are various straight and curved segments.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:81 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:680 msgid "The new curved turnout is also composed of several segments.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmhndld.xtr:107 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmintro.xtr:7 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:683 msgid "Welcome to the XTrackCAD demonstration.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:684 msgid "" "This will show some the features of XTrackCAD in an automated presentation. " "This window contains a number of controls and a message area (which I hope " "you are reading now). \n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:685 msgid "The controls are:\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:686 msgid "Step - advances to the next step of the demo.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:687 msgid "Next - skips ahead to the next demo.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:688 msgid "Quit - exits the demo and returns to XTrackCAD.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:689 msgid "Speed - controls the speed of the demo.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:690 msgid "Click Step now for the next message.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmintro.xtr:23 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:692 msgid "" "If this is the first time you have used the demo you may want to rearrange " "the windows so the demo window does not obscure the main window.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:693 msgid "" "You can move the demo window now by dragging on the title bar at the top of " "the window. I suggest you move it to the top of your screen.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmintro.xtr:31 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:695 msgid "" "The various controls are disabled when it would be inappropiate to click on " "them. When the demo is running the Step button is disabled. When the demo " "is paused the Step button is enabled and you can click it when you are ready " "to view the next part of the demo.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:696 msgid "You can click on Quit to return to XTrackCAD at any time.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:697 msgid "You can adjust the speed of the demonstration with the Speed control.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmintro.xtr:60 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:699 msgid "The demos are designed to fit within a certain sized window.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:700 msgid "" "For best results, change the size of the main XTrackCAD window so the box " "shape is completely visible.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:701 msgid "You can do this by clicking and dragging on a corner of the window.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmintro.xtr:67 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmintro.xtr:72 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:704 msgid "This is the end of the introductory demo.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:705 msgid "" "Please click Step for the next demo or click Quit to return to XTrackCAD.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjcir.xtr:14 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:707 msgid "" "You can also join to and from circles. This will change the circles to " "curves.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:708 msgid "In this example we will join two circles.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjcir.xtr:24 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:710 msgid "" "Here we've selected points on the two circles. The direction of the " "connections (whether clockwise or counter clockwise) is controlled by where " "on the circle you select the connection points.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjcir.xtr:133 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjcir.xtr:152 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:713 msgid "Now let's try a cross connection.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjcir.xtr:246 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:715 msgid "" "Note that the connection is from different 'ends' of the circle than in the " "last example.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjnabut.xtr:22 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:717 msgid "This examples shows joining tracks whose End-Points are aligned.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:718 msgid "" "Note the 2 pairs of tracks have End-Points that are close and aligned but " "not connected.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjnabut.xtr:30 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:720 msgid "The first case joins the curve and straight track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjnabut.xtr:40 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:722 msgid "The second case will join the two straight tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjnabut.xtr:50 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:724 msgid "Note that the two straight tracks were combined to form one track.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjnabut.xtr:55 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjncs.xtr:14 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:727 msgid "" "The command can also join straight and curved tracks (in either " "order).\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:728 msgid "We will enable Cornu easements\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjncs.xtr:32 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:730 msgid "A connecting cornu track is drawn between the two tracks.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjncs.xtr:41 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:732 msgid "" "Notice that the curved track is extended as the connection point moves past " "the End-Point.\n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjncs.xtr:54 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:734 msgid "" "Here the connection makes the curved track wrap around. This is not a " "useful shape, there is a discontinuity at the end. \n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:735 msgid "Adjusting the end point will fix it. \n" msgstr "" #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjncs.xtr:64 #. i18n: C:/Users/mf/Documents/XTrackCAD/src/v5_3_0_beta1/app/lib/demos/dmjnmove.xtr:18 #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:738 msgid "The command can move one group of tracks to join with another.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:739 msgid "" "First command is used to select tracks.\n" msgstr "" #: ../../../../build/v_5_3_0_beta1/app/i18n/custmsg.h:1000 msgid "Selected tracks can be moved or rotated during the