path: root/app/bin/ccornu.c

/** \file ccornu.c
 * Cornu Command. Draw or modify a Cornu Easement Track.
 */
/*  XTrkCad - Model Railroad CAD
 *
 * Cornu curves are a family of mathematically defined curves that define spirals that Euler spirals and elastica come from.
 *
 * They have the useful property for us that curvature increases linearly along the curve which
 * means the acceleration towards the center of the curve also increases evenly. Railways have long understood that
 * smoothly changing the radius is key to passenger comfort and reduced derailments. The railway versions of these
 * curves were called variously called easements, Talbot or Euler spirals.
 *
 * In XTrackCAD often want to change radius smoothly between two tracks whose end position, angle and curvature are known.
 *
 * Finding the right part(s) of the Cornu to fit the gap (if one is available) is mathematically complex,
 * but fortunately Raph Levien published a PhD thesis on this together with his mathematical libraries as
 * open source. He was doing work on font design where the Cornu shapes make beautiful smooth fonts. He
 * was faced with the reality, though, that graphics packages do not include these shapes as native objects
 * and so his solution was to produce a set of Bezier curves that approximate the solution.
 *
 * We already have a tool that can produce a set of arcs and straight line to approximate a Bezier - so that in the end
 * for an easement track we will have an array of Bezier, each of which is an array of Arcs and Lines. The tool will
 * use the approximations for most of its work.
 *
 * The inputs for the Cornu are the end points, angles and radii. To match the Cornu algorithm's expectations we input
 * these as a set of knots (points on lines). One point is always the desired end point and the other two are picked
 * direct the code to derive the other two end conditions. By specifying that the desired end point is a "one-way"
 * knot we ensure that the result has smooth ends of either zero or fixed radius.
 *
 * When reading back the output, we simply ignore the results before the first end point knot and after the last.
 *
 * Because we are mathematically deriving the output, we can alter the end conditions and recalculate. This allows
 * support of modify for Cornu Easements and also movement of tracks that are connected via a Cornu easement to another track.
 *
 *  Note that unlike the existing Easements in XTrkCAD, the degree of sharpness (the rate of change of curvature)
 *  is derived not defined. By adjusting the ends, one can have an infinite set of sharpness solutions.
 *
 * Cornu will not find a solution for every set of input conditions, or may propose one that is impractical such as
 * huge loops or tiny curves. These are mathematically correct, but not useful. In these cases the answer is to change the
 * end conditions (more space between the ends, different angles or different radii).
 *
 * Note that every time we change the Cornu end points we have to recalculate the Bezier approximation,
 * which recalculates the arc approximations, but that still means that the majority of the time we are using the approximation.
 *
 * Cornus do not have cusps, but can result in smooth loops. If there is too much looping, the code will reject the easement.
 *
 * This program is built and founded upon Raph Levien's seminal work and relies on an adaptation of his Cornu library.
 * As with the Bezier work, it also relies on the pages about Bezier curves that PoMax put up at https://pomax.github.io/bezierinfo
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */


#include "track.h"
#include "spiro.h"
#include "spiroentrypoints.h"
#include "bezctx_xtrkcad.h"
#include "draw.h"
#include "ccurve.h"
#include "ccornu.h"
#include "tcornu.h"
#include "tbezier.h"
#include "cstraigh.h"
#include "drawgeom.h"
#include "cjoin.h"
#include "common.h"
#include "param.h"
#include "layout.h"
#include "cundo.h"
#include "cselect.h"
#include "fileio.h"
#include "common-ui.h"


typedef struct {
	coOrd end_center;
	coOrd end_curve;
	DIST_T mid_disp;
	BOOL_T end_valid;
	BOOL_T angle_selected;
	BOOL_T radius_selected;
	BOOL_T last_selected;
	ANGLE_T arc_angle;
} endHandle;

/*
 * STATE INFO
 */
enum Cornu_States { NONE,
                    POS_1,
                    LOC_2,
                    POS_2,
                    PICK_POINT,
                    POINT_PICKED,
                    TRACK_SELECTED
                  };

typedef enum {CORNU_MODIFY, CORNU_CREATE} cornuCmdType_e;


static struct {
	enum Cornu_States state;
	coOrd pos[4];
	int number_of_points;
	int selectEndPoint;
	int selectMidPoint;
	int selectEndHandle;
	int prevSelected;
	int prevEndPoint;
	LWIDTH_T lineWidth;
	track_p trk[2];
	EPINX_T ep[2];
	DIST_T radius[2];
	ANGLE_T angle[2];
	ANGLE_T arcA0[2];
	ANGLE_T arcA1[2];
	coOrd center[2];
	curveType_e trackType[2];

	BOOL_T extend[2];
	trkSeg_t extendSeg[2];

	trkSeg_t ep1Segs[11];
	int ep1Segs_da_cnt;
	trkSeg_t ep2Segs[11];
	int ep2Segs_da_cnt;
	dynArr_t crvSegs_da;
	int crvSegs_da_cnt;
	trkSeg_t trk1Seg;
	trkSeg_t trk2Seg;
	track_p selectTrack;
	DIST_T minRadius;
	BOOL_T circleorHelix[2];
	DIST_T trackGauge;

	int cmdType;

	dynArr_t midSegs;

	dynArr_t mid_points;
	dynArr_t tracks;
	BOOL_T ends[2];

	endHandle endHandle[2];

	bezctx * bezc;

	cornuCmdType_e commandType;

} Da;

static trkSeg_p curCornu;
static wIndex_t cornuHotBarCmdInx;

static struct {
	trkSeg_t st;
	trkSeg_t back;
	trkSeg_t txt;
	int count;
} hotB;


static char * CmdCornuHotBarProc(
        hotBarProc_e op,
        void * data,
        drawCmd_p d,
        coOrd * origP )
{
	trkSeg_p trkseg = &hotB.st;
	switch ( op ) {
	case HB_SELECT:
		CmdCornu( C_CANCEL, zero );
		curCornu = trkseg;
		DoCommandB( I2VP(cornuHotBarCmdInx) );
		return NULL;
	case HB_LISTTITLE:
		sprintf(message,_("%s FlexTrack"),GetScaleName(GetLayoutCurScale()));
		return message;
	case HB_BARTITLE:
		sprintf(message,_("%s FlexTrack"),GetScaleName(GetLayoutCurScale()));
		return message;
	case HB_FULLTITLE:
		sprintf(message,_("%s FlexTrack"),GetScaleName(GetLayoutCurScale()));
		return message;
	case HB_DRAW:
		DrawSegs( d, *origP, 0.0, trkseg, hotB.count, trackGauge, wDrawColorBlack );
		return NULL;
	}
	return NULL;
}

static pts_t pts[4];


EXPORT void AddHotBarCornu( void )
{
	hotB.st.type = SEG_STRTRK;
	hotB.st.color = wDrawColorBlack;
	hotB.st.u.l.pos[0] = zero;
	DIST_T ratio = 75.0/curScaleRatio;
	Translate(&hotB.st.u.l.pos[1],zero,45.0,15.0*ratio);
	hotB.st.u.l.angle = 45.0;

	pts[0].pt_type = wPolyLineStraight;
	pts[0].pt.x = 1.0*ratio;
	pts[0].pt.y = 5.0*ratio;
	pts[1].pt_type = wPolyLineStraight;
	pts[1].pt.x = 1.0*ratio;
	pts[1].pt.y = 8.0*ratio;
	pts[2].pt_type = wPolyLineStraight;
	pts[2].pt.x = 13.0*ratio;
	pts[2].pt.y = 8.0*ratio;
	pts[3].pt_type = wPolyLineStraight;
	pts[3].pt.x = 13.0*ratio;
	pts[3].pt.y = 5.0*ratio;

	hotB.back.type = SEG_FILPOLY;
	hotB.back.color = wDrawColorWhite;
	hotB.back.u.p.orig.x = 0.0;
	hotB.back.u.p.orig.y = 0.0;
	hotB.back.u.p.cnt = 4;
	hotB.back.u.p.angle = 0.0;
	hotB.back.u.p.polyType = RECTANGLE;
	hotB.back.u.p.pts = &pts[0];

	hotB.txt.type = SEG_TEXT;
	hotB.txt.color = wDrawColorBlack;
	hotB.txt.u.t.pos.x = 1.0*ratio;
	hotB.txt.u.t.pos.y = 5.0*ratio;
	hotB.txt.u.t.boxed = TRUE;
	hotB.txt.u.t.string = MyStrdup(_(" FLEX "));
	hotB.txt.u.t.fontP = NULL;
	hotB.txt.u.t.fontSize = 160*mainD.dpi/72.0*ratio;
	hotB.txt.u.t.angle = 0.0;

	char * label = MyMalloc(256);
	sprintf(label,_("%s FlexTrack"),GetScaleName(GetLayoutCurScale()));
	coOrd end;
	end = hotB.st.u.l.pos[1];
	//end.x = 21.25;
	//end.y = 21.25;
	hotB.count = 3;
	//hotB.st.u.l.pos[1] = end;
	AddHotBarElement( label, end, zero, TRUE, TRUE, curBarScale>0?curBarScale:-1,
	                  &hotB, CmdCornuHotBarProc );
}

int createMidPoint(dynArr_t * ap,
                   coOrd pos0,     //end on curve
                   BOOL_T point_selected,
                   BOOL_T point_selectable,
                   BOOL_T track_modifyable
                  )
{
	DIST_T d, w;
	d = tempD.scale*0.25;
	w = tempD.scale/tempD.dpi; /*double width*/

	DYNARR_APPEND(trkSeg_t,*ap,1);

	trkSeg_p sp = &DYNARR_LAST(trkSeg_t,*ap);

	sp->u.c.center = pos0;
	sp->u.c.a0 = 0.0;
	sp->u.c.a1 = 360.0;
	sp->u.c.radius = d/2;
	sp->type = point_selected?SEG_FILCRCL:SEG_CRVLIN;
	sp->lineWidth = w;
	sp->color = drawColorBlack;

	return 1;

}


/**
 * Draw a EndPoint.
 * A Cornu end Point has a filled circle surrounded by another circle for endpoint
 */
int createEndPoint(
        trkSeg_t sp[],   //seg pointer for up to 2 trkSegs (ends and line)
        coOrd pos0,     //end on curve
        BOOL_T point_selected,
        BOOL_T point_selectable,
        BOOL_T track_modifyable,
        BOOL_T track_present,
        ANGLE_T angle,
        DIST_T radius,
        coOrd centert,
        endHandle * endHandle
)
{
	DIST_T d, w;
	int num =0;
	d = tempD.scale*0.25;
	w = tempD.scale/tempD.dpi; /*double width*/
	num = 1;
	if (point_selectable) {
		sp[1].u.c.center = pos0;
		sp[1].u.c.a0 = 0.0;
		sp[1].u.c.a1 = 360.0;
		sp[1].u.c.radius = d/2;
		sp[1].type = SEG_CRVLIN;
		sp[1].lineWidth = w;
		sp[1].color = point_selected?drawColorBlue:drawColorRed;
		num = 2;
	}
	sp[0].u.c.center = pos0;
	sp[0].u.c.a0 = 0.0;
	sp[0].u.c.a1 = 360.0;
	sp[0].lineWidth = w;
	sp[0].u.c.radius = d/4;
	sp[0].color = point_selected?drawColorBlue:drawColorRed;
	if (track_modifyable) {
		sp[0].type = SEG_CRVLIN;
	} else {
		sp[0].type = SEG_FILCRCL;
	}
	if (!track_present && endHandle ) {
		endHandle->end_center = zero;
		endHandle->end_curve = zero;
		endHandle->end_valid = TRUE;
		endHandle->mid_disp = 0.0;
		DIST_T end_length = tempD.scale*2.0;
		Translate(&endHandle->end_curve,pos0,angle,end_length);
		Translate(&endHandle->end_center,pos0,angle,end_length/2);
		if (radius>0.0) {
			ANGLE_T a1 = R2D(end_length/radius);
			if (DifferenceBetweenAngles(angle,FindAngle(centert,pos0))>0.0) {
				a1 = -a1;
			}
			PointOnCircle( &endHandle->end_curve, centert,radius,
			               NormalizeAngle(FindAngle(centert,pos0)+a1));
			PointOnCircle( &endHandle->end_center,centert,radius,
			               NormalizeAngle(FindAngle(centert,pos0)+(a1/2.0)));
			coOrd cm;
			cm = endHandle->end_center;
			ANGLE_T a = FindAngle(endHandle->end_curve,pos0);
			Rotate(&cm,endHandle->end_curve,-a );
			endHandle->mid_disp = cm.x-endHandle->end_curve.x;
			curveData_t curveData;
			PlotCurve(crvCmdFromCenter,pos0,endHandle->end_center, endHandle->end_curve,
			          &curveData, FALSE, 0.0);
			if (curveData.type == curveTypeStraight) {
				coOrd pos_line[2];
				Translate(&pos_line[0],pos0,FindAngle(pos0,endHandle->end_curve)+90,
				          trackGauge/2);
				Translate(&pos_line[1],endHandle->end_curve,FindAngle(pos0,
				                endHandle->end_curve)+90,trackGauge/2);
				sp[num].type = SEG_STRLIN;
				sp[num].lineWidth = w;
				sp[num].u.l.pos[0] = pos_line[0];
				sp[num].u.l.pos[1] = pos_line[1];
				sp[num].color = (endHandle->last_selected
				                 ||endHandle->radius_selected)?drawColorBlue:drawColorRed;
				num++;
				Translate(&pos_line[0],pos0,FindAngle(pos0,endHandle->end_curve)-90,
				          trackGauge/2);
				Translate(&pos_line[1],endHandle->end_curve,FindAngle(pos0,
				                endHandle->end_curve)-90,trackGauge/2);
				sp[num].type = SEG_STRLIN;
				sp[num].lineWidth = w;
				sp[num].u.l.pos[0] = pos_line[0];
				sp[num].u.l.pos[1] = pos_line[1];
				sp[num].color = (endHandle->last_selected
				                 ||endHandle->radius_selected)?drawColorBlue:drawColorRed;
				num++;
				pos_line[0]= pos0;
				Translate(&pos_line[1],pos0,-FindAngle(pos0,endHandle->end_curve),end_length);
				sp[num].type = SEG_STRLIN;
				sp[num].lineWidth = w;
				sp[num].u.l.pos[0] = pos_line[0];
				sp[num].u.l.pos[1] = pos_line[1];
				sp[num].color = drawColorRed;
				num++;
			} else {
				DIST_T pos_rad;
				pos_rad = radius+trackGauge/2;
				sp[num].type = SEG_CRVLIN;
				sp[num].lineWidth = w;
				sp[num].u.c.center = centert;
				sp[num].u.c.radius = pos_rad;
				ANGLE_T an0 = FindAngle(centert,pos0);
				ANGLE_T an1 = FindAngle(centert,endHandle->end_curve);
				if (DifferenceBetweenAngles(an0,an1)>0) {
					sp[num].u.c.a1 = DifferenceBetweenAngles(an0,an1);
					sp[num].u.c.a0 = an0;
				} else {
					sp[num].u.c.a1 = -DifferenceBetweenAngles(an0,an1);
					sp[num].u.c.a0 = an1;
				}
				endHandle->arc_angle = sp[num].u.c.a1;
				sp[num].color = (endHandle->last_selected
				                 ||endHandle->radius_selected)?drawColorBlue:drawColorRed;
				num++;
				pos_rad = radius-trackGauge/2;
				sp[num].type = SEG_CRVLIN;
				sp[num].lineWidth = w;
				sp[num].u.c.center = centert;
				sp[num].u.c.radius = pos_rad;
				sp[num].u.c.a1 = sp[num-1].u.c.a1;
				sp[num].u.c.a0 = sp[num-1].u.c.a0;
				sp[num].color = (endHandle->last_selected
				                 ||endHandle->radius_selected)?drawColorBlue:drawColorRed;
				num++;
			}
		} else {
			coOrd pos_line[2];
			Translate(&pos_line[0],pos0,FindAngle(pos0,endHandle->end_curve)+90,
			          trackGauge/2);
			Translate(&pos_line[1],endHandle->end_curve,FindAngle(pos0,
			                endHandle->end_curve)+90,trackGauge/2);
			sp[num].type = SEG_STRLIN;
			sp[num].lineWidth = w;
			sp[num].u.l.pos[0] = pos_line[0];
			sp[num].u.l.pos[1] = pos_line[1];
			sp[num].color = (endHandle->last_selected
			                 ||endHandle->radius_selected)?drawColorBlue:drawColorRed;
			num++;
			Translate(&pos_line[0],pos0,FindAngle(pos0,endHandle->end_curve)-90,
			          trackGauge/2);
			Translate(&pos_line[1],endHandle->end_curve,FindAngle(pos0,
			                endHandle->end_curve)-90,trackGauge/2);
			sp[num].type = SEG_STRLIN;
			sp[num].lineWidth = w;
			sp[num].u.l.pos[0] = pos_line[0];
			sp[num].u.l.pos[1] = pos_line[1];
			sp[num].color = (endHandle->last_selected
			                 ||endHandle->radius_selected)?drawColorBlue:drawColorRed;
			num++;

		}
		coOrd pos_line[2];
		pos_line[0]= pos0;
		Translate(&pos_line[1],pos0,angle+180,end_length);
		sp[num].type = SEG_STRLIN;
		sp[num].lineWidth = w;
		sp[num].u.l.pos[0] = pos_line[0];
		sp[num].u.l.pos[1] = pos_line[1];
		sp[num].color = drawColorRed;
		num++;
		sp[num].type = SEG_CRVLIN;
		sp[num].u.c.center = endHandle->end_curve;
		sp[num].u.c.a0 = 0.0;
		sp[num].u.c.a1 = 360.0;
		sp[num].lineWidth = w;
		sp[num].u.c.radius = d/4;
		sp[num].color = endHandle->angle_selected?drawColorBlue:drawColorRed;
		num++;
		if (radius<=0.0) {
			DrawArrowHeads(&sp[num],endHandle->end_center,angle+90.0,TRUE,
			               endHandle->radius_selected?drawColorBlue:drawColorRed);
		} else {
			DrawArrowHeads(&sp[num],endHandle->end_center,FindAngle(centert,
			                endHandle->end_center),TRUE,
			               endHandle->radius_selected?drawColorBlue:drawColorRed);
		}
		num=num+5;
	} else if (endHandle) {
		endHandle->end_valid=FALSE;
	}
	return num;
}

static dynArr_t anchors_da;
#define anchors(N) DYNARR_N(trkSeg_t,anchors_da,N)

static void CreateCornuEndAnchor(coOrd p, wBool_t lock)
{
	DIST_T d = tempD.scale*0.15;

	DYNARR_APPEND(trkSeg_t,anchors_da,1);
	int i = anchors_da.cnt-1;
	anchors(i).type = lock?SEG_FILCRCL:SEG_CRVLIN;
	anchors(i).color = wDrawColorBlue;
	anchors(i).u.c.center = p;
	anchors(i).u.c.radius = d/2;
	anchors(i).u.c.a0 = 0.0;
	anchors(i).u.c.a1 = 360.0;
	anchors(i).lineWidth = 0;
	DYNARR_APPEND(trkSeg_t,anchors_da,1);
	i = anchors_da.cnt-1;
	anchors(i).type = SEG_CRVLIN;
	anchors(i).color = wDrawColorBlue;
	anchors(i).u.c.center = p;
	anchors(i).u.c.radius = d;
	anchors(i).u.c.a0 = 0.0;
	anchors(i).u.c.a1 = 360.0;
	anchors(i).lineWidth = 0;
}

static void CreateCornuExtendAnchor(coOrd p, ANGLE_T a, wBool_t selected)
{
	DYNARR_SET(trkSeg_t,anchors_da,anchors_da.cnt+5);
	DrawArrowHeads(&DYNARR_N(trkSeg_t,anchors_da,anchors_da.cnt-5),p,a,FALSE,
	               wDrawColorBlue);
}

static void CreateCornuAnchor(coOrd p, wBool_t open)
{
	DIST_T d = tempD.scale*0.15;
	DYNARR_APPEND(trkSeg_t,anchors_da,1);
	int i = anchors_da.cnt-1;
	anchors(i).type = open?SEG_CRVLIN:SEG_FILCRCL;
	anchors(i).color = wDrawColorBlue;
	anchors(i).u.c.center = p;
	anchors(i).u.c.radius = d/2;
	anchors(i).u.c.a0 = 0.0;
	anchors(i).u.c.a1 = 360.0;
	anchors(i).lineWidth = 0;
}

/*
 * Add element to DYNARR pointed to by caller from segment handed in
 */
void addSegCornu(dynArr_t * const array_p, trkSeg_p seg)
{
	trkSeg_p s;

	DYNARR_APPEND(trkSeg_t, * array_p, 10);          //Adds 1 to cnt
	s = &DYNARR_N(trkSeg_t,* array_p,array_p->cnt-1);
	s->type = seg->type;
	DYNARR_FREE( trkSeg, s->bezSegs );
	s->color = seg->color;
	s->lineWidth = seg->lineWidth;
	if ((s->type == SEG_BEZLIN || s->type == SEG_BEZTRK) && seg->bezSegs.cnt) {
		s->u.b.angle0 = seg->u.b.angle0;  //Copy all the rest
		s->u.b.angle3 = seg->u.b.angle3;
		s->u.b.length = seg->u.b.length;
		s->u.b.minRadius = seg->u.b.minRadius;
		for (int i=0; i<4; i++) { s->u.b.pos[i] = seg->u.b.pos[i]; }
		s->u.b.radius0 = seg->u.b.radius3;
		for (int i = 0; i<seg->bezSegs.cnt; i++) {
			//recurse for copying embedded Beziers as in Cornu joint
			addSegCornu(&s->bezSegs,
			            &DYNARR_N(trkSeg_t,seg->bezSegs,i));
		}
	} else {
		s->u = seg->u;
	}
}
EXPORT void SetKnots(spiro_cp knots[], coOrd posk[], char type[], int count)
{
	for (int i = 0; i < count; i++) {
		knots[i].x = posk[i].x;
		knots[i].y = posk[i].y;
		knots[i].ty = type[i];
	}
}

typedef struct {
	coOrd pos;
	char ty;
} points_t;

// Take in extra points within Cornu
// G2 (position only k1'' = k2'' = 0); Also Cornu <-> Cornu
// G4 (position only - splitable for Cornu - a G4 point) k1''= k2''

BOOL_T CallCornuM(dynArr_t extra_points, BOOL_T end[2], coOrd pos[2],
                  cornuParm_t * cp, dynArr_t * array_p, BOOL_T spots)
{
	DYNARR_RESET( trkSeg_t, *array_p );
	//Create LH knots
	//Find remote end point of track, create start knot
	int ends[2];
	ends[0] = (end[0]?2:0); ends[1] = (end[0]?3:1)+extra_points.cnt;
	spiro_cp * knots;
	coOrd * posk;
	char * type;
	posk = MyMalloc((6+extra_points.cnt)*sizeof(coOrd));
	knots = MyMalloc((6+extra_points.cnt)*sizeof(spiro_cp));
	type = MyMalloc((6+extra_points.cnt)*sizeof(char));
	BOOL_T back;
	ANGLE_T angle1;

	if (Da.bezc) { free(Da.bezc); }

	Da.bezc = new_bezctx_xtrkcad(array_p,ends,spots,tempD.scale*0.15/4);

	coOrd pos0 = pos[0];

	if (end[0]) {
		type[0] = SPIRO_OPEN_CONTOUR;
		type[1] = SPIRO_G2;
		type[2] = SPIRO_RIGHT;
		if (cp->radius[0] == 0.0) {
			Translate(&posk[0],pos0,cp->angle[0],10);
			Translate(&posk[1],pos0,cp->angle[0],5);
		} else {
			angle1 = FindAngle(cp->center[0],pos[0]);
			if (NormalizeAngle(angle1 - cp->angle[0])<180) { back = TRUE; }
			else { back = FALSE; }
			posk[0] = pos[0];
			Rotate(&posk[0],cp->center[0],(back)?-10:10);
			posk[1] = pos[0];
			Rotate(&posk[1],cp->center[0],(back)?-5:5);
		}
		posk[2] = pos[0];
	} else {
		type[0] = SPIRO_OPEN_CONTOUR;
		posk[0] = pos[0];
	}

	for (int i=0; i<extra_points.cnt; i++) {
		posk[(end[0]?3:1)+i] = DYNARR_N(coOrd,extra_points,i);
		type[(end[0]?3:1)+i] = SPIRO_G4;
	}

	posk[(end[0]?3:1)+extra_points.cnt] = pos[1];
	coOrd pos1 = pos[1];

	if (end[1]) {
		type[(end[0]?3:1)+extra_points.cnt] = SPIRO_LEFT;
		type[(end[0]?3:1)+extra_points.cnt+1] = SPIRO_G2;
		type[(end[0]?3:1)+extra_points.cnt+2] = SPIRO_END_OPEN_CONTOUR;
		if (cp->radius[1] == 0.0) {
			Translate(&posk[(end[0]?3:1)+extra_points.cnt+1],pos1,cp->angle[1],5);
			Translate(&posk[(end[0]?3:1)+extra_points.cnt+2],pos1,cp->angle[1],10);
		} else {
			angle1 = FindAngle(cp->center[1],pos[1]);
			if (NormalizeAngle(angle1 - cp->angle[1])>180) { back = TRUE; }
			else { back = FALSE; }
			posk[(end[0]?3:1)+extra_points.cnt+1] = pos[1];
			Rotate(&posk[(end[0]?3:1)+extra_points.cnt+1],cp->center[1],(back)?5:-5);
			posk[(end[0]?3:1)+extra_points.cnt+2] = pos[1];
			Rotate(&posk[(end[0]?3:1)+extra_points.cnt+2],cp->center[1],(back)?10:-10);
		}
	} else {
		type[(end[0]?3:1)+extra_points.cnt] = SPIRO_END_OPEN_CONTOUR;
	}
	SetKnots(knots, posk, type, ((end[0]?3:1)+(end[1]?3:1)+extra_points.cnt));
	TaggedSpiroCPsToBezier(knots,Da.bezc);
	MyFree(posk);
	MyFree(knots);
	MyFree(type);
	if (!bezctx_xtrkcad_close(Da.bezc)) {
		return FALSE;
	}
	return TRUE;
}

EXPORT BOOL_T CallCornu0(coOrd pos[2], coOrd center[2], ANGLE_T angle[2],
                         DIST_T radius[2], dynArr_t * array_p, BOOL_T spots)
{
	DYNARR_RESET( trkSeg_t, *array_p );
	//Create LH knots
	//Find remote end point of track, create start knot
	int ends[2];
	ends[0] = 2; ends[1] = 3;
	spiro_cp knots[6];
	coOrd posk[6];
	char type[6];
	BOOL_T back;
	ANGLE_T angle1;

	if (Da.bezc) { free(Da.bezc); }

	Da.bezc = new_bezctx_xtrkcad(array_p,ends,spots,tempD.scale*0.15/4);

	coOrd pos0 = pos[0];
	type[0] = SPIRO_OPEN_CONTOUR;


	if (radius[0] == 0.0) {
		Translate(&posk[0],pos0,angle[0],10);
		Translate(&posk[1],pos0,angle[0],5);
	} else {
		angle1 = FindAngle(center[0],pos[0]);
		if (NormalizeAngle(angle1 - angle[0])<180) { back = TRUE; }
		else { back = FALSE; }
		posk[0] = pos[0];
		Rotate(&posk[0],center[0],(back)?-10:10);
		posk[1] = pos[0];
		Rotate(&posk[1],center[0],(back)?-5:5);
	}
	type[1] = SPIRO_G2;
	posk[2] = pos[0];
	type[2] = SPIRO_RIGHT;

	posk[3] = pos[1];
	type[3] = SPIRO_LEFT;

	coOrd pos1 = pos[1];

	if (radius[1] == 0.0 ) {
		Translate(&posk[4],pos1,angle[1],5);
		Translate(&posk[5],pos1,angle[1],10);
	} else {
		angle1 = FindAngle(center[1],pos[1]);
		if (NormalizeAngle(angle1 - angle[1])>180) { back = TRUE; }
		else { back = FALSE; }
		posk[4] = pos[1];
		Rotate(&posk[4],center[1],(back)?5:-5);
		posk[5] = pos[1];
		Rotate(&posk[5],center[1],(back)?10:-10);
	}
	type[4] = SPIRO_G2;
	type[5] = SPIRO_END_OPEN_CONTOUR;

	SetKnots(knots, posk, type, 6);
	TaggedSpiroCPsToBezier(knots,Da.bezc);
	if (!bezctx_xtrkcad_close(Da.bezc)) {
		return FALSE;
	}
	return TRUE;
}

/*
 * Set up the call to Cornu0. Take the conditions of the two ends from the connected tracks.
 */
BOOL_T CallCornu(coOrd pos[2], track_p trk[2], EPINX_T ep[2],
                 dynArr_t * array_p, cornuParm_t * cp)
{

	trackParams_t params;
	ANGLE_T angle;
	for (int i=0; i<2; i++) {
		if (trk[i]) {
			if (!GetTrackParams(PARAMS_CORNU,trk[i],pos[i],&params)) { return FALSE; }
			cp->pos[i] = pos[i];
			if (ep && ep[i]>=0) { angle = GetTrkEndAngle(trk[i],ep[i]); }
			else { angle = params.angle; } //Turntable only
			if (Da.circleorHelix[i]) { //Helix/Circle only
				cp->radius[i] = params.arcR;
				cp->center[i] = params.arcP;
				if (ep && ep[i]>=0) { cp->angle[i] = NormalizeAngle(params.track_angle+(ep[i]?180:0)); }
			} else if (params.type == curveTypeStraight) {
				cp->angle[i] = NormalizeAngle(angle+180);       //Because end always backwards
				cp->radius[i] = 0.0;
			} else if ((params.type == curveTypeCornu || params.type == curveTypeBezier)
			           && params.arcR == 0.0 ) {
				cp->radius[i] = 0.0;
				if (ep && ep[i]>=0) { cp->angle[i] = NormalizeAngle(params.track_angle+(ep[i]?180:0)); }  //Use point not end
			} else if (params.type == curveTypeCurve) {
				if (ep && ep[i]>=0) { cp->angle[i] = NormalizeAngle(params.track_angle+(ep[i]?180:0)); }
				cp->radius[i] = params.arcR;
				cp->center[i] = params.arcP;
			} else if ((params.type == curveTypeCornu || params.type == curveTypeBezier)
			           && params.arcR != 0.0 ) {
				if (ep && ep[i]>=0) { cp->angle[i] = NormalizeAngle(params.track_angle+(ep[i]?180:0)); }
				cp->radius[i] = params.arcR;
				cp->center[i] = params.arcP;
			} else {
				cp->angle[i] = NormalizeAngle(angle
				                              +180);             //Unknown - treat like straight
				cp->radius[i] = params.arcR;
				cp->center[i] = params.arcP;
			}
		}
	}

	return CallCornu0(pos,cp->center,cp->angle,cp->radius,array_p,ep?TRUE:FALSE);
}



/*
 * Draw Cornu while editing it. It consists of up to five elements - the ends, the curve and one or two End Points.
 *
 */

EXPORT void DrawCornuCurve(
        trkSeg_p first_trk,
        trkSeg_p point1,
        int ep1Segs_cnt,
        trkSeg_p curveSegs,
        int crvSegs_cnt,
        trkSeg_p point2,
        int ep2Segs_cnt,
        trkSeg_p second_trk,
        trkSeg_p extend1_trk,
        trkSeg_p extend2_trk,
        trkSeg_p mids,
        int midSegs_cnt,
        wDrawColor color
)
{
	if (first_trk) {
		DrawSegs( &tempD, zero, 0.0, first_trk, 1, Da.trackGauge, drawColorBlack );
	}
	if (crvSegs_cnt>0 && curveSegs) {
		DrawSegs( &tempD, zero, 0.0, curveSegs, crvSegs_cnt, Da.trackGauge, color );
	}
	if (second_trk) {
		DrawSegs( &tempD, zero, 0.0, second_trk, 1, Da.trackGauge, drawColorBlack );
	}
	if (ep1Segs_cnt>0 && point1) {
		DrawSegs( &tempD, zero, 0.0, point1, ep1Segs_cnt, Da.trackGauge,
		          drawColorBlack );
	}
	if (ep2Segs_cnt>0 && point2) {
		DrawSegs( &tempD, zero, 0.0, point2, ep2Segs_cnt, Da.trackGauge,
		          drawColorBlack );
	}
	if (midSegs_cnt>0 && mids) {
		DrawSegs( &tempD, zero, 0.0, mids, midSegs_cnt, Da.trackGauge,
		          drawColorBlack );
	}
	if (extend1_trk) {
		DrawSegs( &tempD, zero, 0.0, extend1_trk, 1, Da.trackGauge, drawColorBlack);
	}
	if (extend2_trk) {
		DrawSegs( &tempD, zero, 0.0, extend2_trk, 1, Da.trackGauge, drawColorBlack);
	}

}

/*
 * If Track, make it red if the radius is below minimum
 */
void DrawTempCornu()
{


	DrawCornuCurve(&Da.trk1Seg,
	               &Da.ep1Segs[0],Da.ep1Segs_da_cnt,
	               &DYNARR_N(trkSeg_t,Da.crvSegs_da,0),Da.crvSegs_da_cnt,
	               &Da.ep2Segs[0],Da.ep2Segs_da_cnt,
	               &Da.trk2Seg,
	               Da.extend[0]?&Da.extendSeg[0]:NULL,
	               Da.extend[1]?&Da.extendSeg[1]:NULL,
	               &DYNARR_N(trkSeg_t,Da.midSegs,0),Da.midSegs.cnt,
	               fabs(Da.minRadius)<(GetLayoutMinTrackRadius()-EPSILON)?exceptionColor:
	               normalColor);

}

void CreateBothEnds(int selectEndPoint, int selectMidPoint, int selectEndHandle,
                    int lastSelected )
{
	BOOL_T selectable[2],modifyable[2];
	selectable[0] = !Da.trk[0] || (
	                        Da.trk[0] && !QueryTrack(Da.trk[0],Q_IS_CORNU)
	                        && !QueryTrack(Da.trk[0],Q_CAN_MODIFY_CONTROL_POINTS));
	modifyable[0] = !Da.trk[0] || (
	                        Da.trk[0] && QueryTrack(Da.trk[0],Q_CORNU_CAN_MODIFY));
	selectable[1] = !Da.trk[1] || (
	                        Da.trk[1] && !QueryTrack(Da.trk[1],Q_IS_CORNU)
	                        && !QueryTrack(Da.trk[1],Q_CAN_MODIFY_CONTROL_POINTS));
	modifyable[1] = !Da.trk[1] || (
	                        Da.trk[1] && QueryTrack(Da.trk[1],Q_CORNU_CAN_MODIFY));

	Da.endHandle[0].angle_selected = (selectEndHandle==1)?TRUE:FALSE;
	Da.endHandle[0].radius_selected = (selectEndHandle==0)?TRUE:FALSE;
	Da.endHandle[1].angle_selected = (selectEndHandle==3)?TRUE:FALSE;
	Da.endHandle[1].radius_selected = (selectEndHandle==2)?TRUE:FALSE;
	Da.endHandle[0].last_selected = lastSelected==0?TRUE:FALSE;
	Da.endHandle[1].last_selected = lastSelected==1?TRUE:FALSE;
	if (selectEndPoint == -1) {
		Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0],FALSE,selectable[0],
		                                   modifyable[0],Da.trk[0]!=NULL,Da.angle[0],Da.radius[0],Da.center[0],
		                                   Da.extend[0]?NULL:&Da.endHandle[0]);
		Da.ep2Segs_da_cnt = createEndPoint(Da.ep2Segs, Da.pos[1],FALSE,selectable[1],
		                                   modifyable[1],Da.trk[1]!=NULL,Da.angle[1],Da.radius[1],Da.center[1],
		                                   Da.extend[1]?NULL:&Da.endHandle[1]);
	} else {
		Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0],selectEndPoint == 0,
		                                   selectable[0],modifyable[0],Da.trk[0]!=NULL,Da.angle[0],Da.radius[0],
		                                   Da.center[0],Da.extend[0]?NULL:&Da.endHandle[0]);
		Da.ep2Segs_da_cnt = createEndPoint(Da.ep2Segs, Da.pos[1],selectEndPoint == 1,
		                                   selectable[1],modifyable[1],Da.trk[1]!=NULL,Da.angle[1],Da.radius[1],
		                                   Da.center[1],Da.extend[1]?NULL:&Da.endHandle[1]);
	}
	Da.endHandle[0].end_valid = !Da.extend[0];
	Da.endHandle[1].end_valid = !Da.extend[1];
	DYNARR_RESET(trkSeg_t,Da.midSegs);
	for (int i=0; i<Da.mid_points.cnt; i++) {
		createMidPoint(&Da.midSegs, DYNARR_N(coOrd,Da.mid_points,i),selectMidPoint == i,
		               TRUE, TRUE );
	}
	if (Da.radius[0] >=0.0) { Da.ends[0] = TRUE; }
	else { Da.ends[0] = FALSE; }
	if (Da.radius[1] >=0.0) { Da.ends[1] = TRUE; }
	else { Da.ends[1] = FALSE; }
}

BOOL_T GetConnectedTrackParms(track_p t, const coOrd pos, int end,
                              EPINX_T track_end, wBool_t extend)
{
	trackParams_t trackParams;
	coOrd pos1;
	if ((track_end>=0) && extend) { pos1 = GetTrkEndPos(t,track_end); }
	else { pos1 = pos; }
	if (!GetTrackParams(PARAMS_CORNU, t, pos1, &trackParams)) { return FALSE; }
	Da.radius[end] = 0.0;
	Da.center[end] = zero;
	Da.circleorHelix[end] = FALSE;
	Da.trackType[end] = trackParams.type;
	if (trackParams.type == curveTypeCurve) {
		Da.arcA0[end] = trackParams.arcA0;
		Da.arcA1[end] = trackParams.arcA1;
		Da.radius[end] = trackParams.arcR;
		Da.center[end] = trackParams.arcP;
		if (trackParams.circleOrHelix) {
			Da.circleorHelix[end] = TRUE;
			Da.angle[end] = trackParams.track_angle;	  //For Now
		} else {
			Da.angle[end] = NormalizeAngle(GetTrkEndAngle(t,track_end)+180);
			//Da.angle[end] = NormalizeAngle(trackParams.track_angle + (track_end?180:0));
		}
	} else if (trackParams.type == curveTypeBezier)  {
		Da.angle[end] = NormalizeAngle(trackParams.track_angle+(track_end?180:0));
		if (trackParams.arcR == 0) {
			Da.radius[end] = 0;
			Da.center[end] = zero;
		} else {
			Da.arcA0[end] = trackParams.arcA0;
			Da.arcA1[end] = trackParams.arcA1;
			Da.radius[end] = trackParams.arcR;
			Da.center[end] = trackParams.arcP;
		}
	} else if (trackParams.type == curveTypeCornu) {
		int ep = trackParams.ep;
		Da.angle[end] = NormalizeAngle(trackParams.cornuAngle[ep]+180);
		Da.radius[end] = trackParams.cornuRadius[ep];
		Da.pos[end] = trackParams.cornuEnd[ep];
		Da.center[end] = trackParams.cornuCenter[ep];
	} else if (trackParams.type == curveTypeStraight) {
		if (trackParams.ep>=0) {
			Da.angle[end] = NormalizeAngle(GetTrkEndAngle(t,
			                               track_end)+180);        //Ignore params.angle because it gives from nearest end
		} else {
			Da.angle[end] = NormalizeAngle(trackParams.angle+180);            //Turntable
			Da.pos[end] = trackParams.lineEnd;								  //End moved to constrain angle
		}
	}
	return TRUE;
}

void CorrectHelixAngles()
{
	if ( Da.circleorHelix[0] ) {
		Da.ep[0] = PickArcEndPt( Da.center[0], Da.pos[0], Da.pos[1] );
		if (Da.ep[0] == 1) { Da.angle[0] = NormalizeAngle(Da.angle[0]+180); }
	}
	if ( Da.circleorHelix[1] ) {
		Da.ep[1] = PickArcEndPt( Da.center[1], Da.pos[1], Da.pos[0] );
		if (Da.ep[1] == 1) { Da.angle[1] = NormalizeAngle(Da.angle[1]+180); }
	}
}

BOOL_T CheckHelix(track_p trk)
{
	if ( Da.trk[0] && QueryTrack(Da.trk[0],Q_HAS_VARIABLE_ENDPOINTS)) {
		track_p t = GetTrkEndTrk(Da.trk[0],Da.ep[0]);
		if ( t != NULL && t != trk)  {
			ErrorMessage( MSG_TRK_ALREADY_CONN, _("First") );
			return FALSE;
		}
	}
	if ( Da.trk[1] && QueryTrack(Da.trk[1],Q_HAS_VARIABLE_ENDPOINTS)) {
		track_p t = GetTrkEndTrk(Da.trk[1],Da.ep[1]);
		if ( t != NULL && t != trk)  {
			ErrorMessage( MSG_TRK_ALREADY_CONN, _("Second") );
			return FALSE;
		}
	}
	return TRUE;
}

void SetUpCornuParms(cornuParm_t * cp)
{
	cp->center[0] = Da.center[0];
	cp->angle[0] = Da.angle[0];
	cp->radius[0] = Da.radius[0];
	cp->center[1] = Da.center[1];
	cp->angle[1] = Da.angle[1];
	cp->radius[1] = Da.radius[1];
}

track_p CreateCornuFromPoints(coOrd pos[2],BOOL_T track_end[2])
{
	coOrd center[2];
	DIST_T radius[2];
	ANGLE_T angle[2];
	BOOL_T back, neg;
	cornuParm_t new;
	int inx,subinx;
	coOrd pos_temp[2];

	for (int i=0; i<2; i++) {
		pos_temp[i] = pos[i];

		if (!track_end[i] || (Da.radius[i]==-1.0)) {

			angle[i] = GetAngleSegs(Da.crvSegs_da.cnt,&DYNARR_N(trkSeg_t,Da.crvSegs_da,0),
			                        &pos_temp[i],&inx,NULL,&back,&subinx,&neg);

			trkSeg_p segPtr = &DYNARR_N(trkSeg_t, Da.crvSegs_da, inx);

			if (segPtr->type == SEG_BEZTRK) {
				segPtr = &DYNARR_N(trkSeg_t, segPtr->bezSegs, subinx);
			}

			if (i==0) {
				if (neg==back) { angle[i] = NormalizeAngle(angle[i]+180); }
			} else {
				if (!(neg==back)) { angle[i] = NormalizeAngle(angle[i]+180); }
			}

			if (segPtr->type == SEG_STRTRK) {
				radius[i] = 0.0;
				center[i] = zero;
			} else if (segPtr->type == SEG_CRVTRK) {
				center[i] = segPtr->u.c.center;
				radius[i] = fabs(segPtr->u.c.radius);
			}
		} else {
			pos[i] = Da.pos[i];
			radius[i] = Da.radius[i];
			center[i] = Da.center[i];
			angle[i] = Da.angle[i];
			neg = FALSE;
			back = FALSE;
		}
	}
	new.pos[0] = pos[0];
	new.pos[1] = pos[1];
	new.angle[0] = angle[0];
	new.angle[1] = angle[1];
	new.center[0] = center[0];
	new.center[1] = center[1];
	new.radius[0] = radius[0];
	new.radius[1] = radius[1];

	track_p trk1 = NewCornuTrack(new.pos,new.center,new.angle,new.radius,NULL,0);
	if (trk1==NULL) {
		wBeep();
		InfoMessage(
		        _("Cornu Create Failed for p1[%0.3f,%0.3f] p2[%0.3f,%0.3f], c1[%0.3f,%0.3f] c2[%0.3f,%0.3f], a1=%0.3f a2=%0.3f, r1=%s r2=%s"),
		        new.pos[0].x,new.pos[0].y,
		        new.pos[1].x,new.pos[1].y,
		        new.center[0].x,new.center[0].y,
		        new.center[1].x,new.center[1].y,
		        new.angle[0],new.angle[1],
		        FormatDistance(new.radius[0]),FormatDistance(new.radius[1]));
		UndoEnd();
		return NULL;
	}
	return trk1;
}



ANGLE_T GetOpenAngle(coOrd pos[2],ANGLE_T angle[2],int moved)
{
	ANGLE_T a = FindAngle(pos[1-moved],pos[moved]);
	ANGLE_T diff = (180+a)-angle[1-moved];  					//Difference between input and line
	return a+diff;												//Change to line plus this at the other end
}

static struct {
	ANGLE_T angle;
	DIST_T radius;

} cornuModCmdContext;

static BOOL_T infoSubst = FALSE;

static paramFloatRange_t r10000_10000 = {-10000, 10000};
static paramFloatRange_t r0_360 = { 0, 360, 80 };

static paramData_t cornuModPLs[] = {

#define cornuModEndAnglePD			(cornuModPLs[0])
#define cornuModEndAngle 0
	{ PD_FLOAT, &cornuModCmdContext.angle, "endangle", PDO_NORECORD|BO_ENTER, &r0_360, N_("End Angle") },
#define cornuModEndRadiusPD			(cornuModPLs[1])
#define cornuModEndRadius           1
	{ PD_FLOAT, &cornuModCmdContext.radius, "endradius", PDO_DIM|PDO_NORECORD|BO_ENTER, &r10000_10000, N_("End Radius") },
};
static paramGroup_t cornuModPG = { "cornuMod", 0, cornuModPLs, COUNT( cornuModPLs ) };

/*
 * AdjustCornuCurve
 *
 * Called to adjust the curve either when creating it or modifying it
 * States are "PICK_POINT" and "POINT_PICKED" and "TRACK_SELECTED".
 *
 * In PICK_POINT, the user can select an end-point to drag and release in POINT_PICKED. They can also
 * hit Enter (which saves the changes) or ESC (which cancels them).
 *
 * Deal with extended tracks from ends.
 *
 */
EXPORT STATUS_T AdjustCornuCurve(
        wAction_t action,
        coOrd pos,
        cornuMessageProc message )
{
	track_p t;
	DIST_T d;
	ANGLE_T a, a2;
	EPINX_T ep;
	cornuParm_t cp;

	wControl_p controls[5];				//Always needs a NULL last entry
	char * labels[4];

	Da.cmdType = VP2L(commandContext);


	if (Da.state != PICK_POINT && Da.state != POINT_PICKED
	    && Da.state != TRACK_SELECTED) { return C_CONTINUE; }

	switch ( action & 0xFF) {

	case C_START:
		DYNARR_RESET(trkSeg_t,anchors_da);
		infoSubst = FALSE;
		Da.selectEndPoint = -1;
		Da.selectMidPoint = -1;
		Da.selectEndHandle = -1;
		Da.prevSelected = -1;
		Da.prevEndPoint = -1;
		Da.extend[0] = FALSE;
		Da.extend[1] = FALSE;
		CreateBothEnds(Da.selectEndPoint, Da.selectMidPoint,Da.selectEndHandle,
		               Da.prevSelected);
		DYNARR_RESET( trkSeg_t, Da.crvSegs_da );
		SetUpCornuParms(&cp);
		if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
		else { Da.crvSegs_da_cnt = 0; }
		Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
		InfoMessage( _("Select Point, or Add Point") );
		TempRedraw(); // AdjustCornuCurve C_START
		return C_CONTINUE;

	case C_UPDATE:
		if (Da.state != PICK_POINT && Da.prevSelected>-1) { return C_CONTINUE; }
		int sel = Da.prevSelected;
		if (Da.trk[sel]) { return C_CONTINUE; }    //Track Here - should never happen
		Da.radius[sel] = fabs(cornuModCmdContext.radius);
		Da.angle[sel] = cornuModCmdContext.angle;
		if (cornuModCmdContext.radius!=0) {
			Translate(&Da.center[sel],Da.pos[sel],Da.angle[sel]+90,
			          cornuModCmdContext.radius);
		}
		CreateBothEnds(Da.prevSelected,-1,-1,Da.prevSelected);
		SetUpCornuParms(&cp);
		if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
		else { Da.crvSegs_da_cnt = 0; }
		Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
		return C_CONTINUE;
		break;

	case wActionMove:
		if (Da.state == NONE || Da.state == PICK_POINT) {
			wSetCursor(mainD.d,defaultCursor);
			DYNARR_RESET(trkSeg_t,anchors_da);
			for(int i=0; i<2; i++) {
				if (IsClose(FindDistance(pos,Da.pos[i]))) {
					if (((MyGetKeyState() & WKEY_SHIFT) != 0) && Da.selectTrack) {
						CreateCornuExtendAnchor(Da.pos[i], Da.angle[i], FALSE);
						return C_CONTINUE;
					} else {
						CreateCornuAnchor(Da.pos[i], FALSE);
						return C_CONTINUE;
					}
				}
			}
			CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
			               Da.prevSelected);
			Da.selectEndPoint = -1;
			for (int i=0; i<Da.mid_points.cnt; i++) {
				d = FindDistance(DYNARR_N(coOrd,Da.mid_points,i),pos);
				if (IsClose(d)) {
					CreateCornuAnchor(DYNARR_N(coOrd,Da.mid_points,i),FALSE);
					wSetCursor(mainD.d,wCursorNone);
					return C_CONTINUE;
				}
			}
			for (int i=0; i<2; i++) {
				if (Da.endHandle[i].end_valid == FALSE) { continue; }
				d = FindDistance(Da.endHandle[i].end_center,pos);
				if (IsClose(d)) {
					CreateCornuAnchor(Da.endHandle[i].end_center, FALSE);
					wSetCursor(mainD.d,wCursorNone);
					return C_CONTINUE;
				}
			}
			for (int i=0; i<2; i++) {
				if (Da.endHandle[i].end_valid == FALSE) { continue; }
				d = FindDistance(Da.endHandle[i].end_curve,pos);
				if (IsClose(d)) {
					CreateCornuAnchor(Da.endHandle[i].end_curve, FALSE);
					wSetCursor(mainD.d,wCursorNone);
					return C_CONTINUE;
				}
			}
			coOrd temp_pos = pos;
			if (IsClose(DistanceSegs(zero,0.0,Da.crvSegs_da.cnt,&DYNARR_N(trkSeg_t,
			                         Da.crvSegs_da,0),&temp_pos,NULL))) {
				CreateCornuAnchor(temp_pos, TRUE);
			} else { wSetCursor(mainD.d,defaultCursor); }
		}
		return C_CONTINUE;

	case C_DOWN:
		DYNARR_RESET(trkSeg_t,anchors_da);
		if (Da.state != PICK_POINT) { return C_CONTINUE; }
		Da.selectEndPoint = -1;
		Da.selectMidPoint = -1;
		Da.selectEndHandle = -1;
		Da.prevSelected = -1;
		if (infoSubst) {
			InfoSubstituteControls( NULL, NULL );
			infoSubst = FALSE;
		}
		for (int i=0; i<2; i++) {
			d = FindDistance(Da.pos[i],pos);
			if (IsClose(d)) {
				Da.selectEndPoint = i;
				CreateCornuAnchor(Da.pos[i],FALSE);
				break;
			}
		}
		if (Da.selectEndPoint == -1) {
			for (int i=0; i<Da.mid_points.cnt; i++) {
				d = FindDistance(DYNARR_N(coOrd,Da.mid_points,i),pos);
				if (IsClose(d)) {
					Da.selectMidPoint = i;
					Da.selectEndPoint = -1;
					CreateCornuAnchor(DYNARR_N(coOrd,Da.mid_points,i),FALSE);
					break;
				}
			}
			if (Da.selectMidPoint == -1 ) {
				for (int i=0; i<2; i++) {
					if (Da.endHandle[i].end_valid == FALSE) { continue; }
					d = FindDistance(Da.endHandle[i].end_center,pos);
					if (IsClose(d)) {
						Da.selectEndHandle = i*2;
						Da.selectEndPoint = -1;
						Da.selectMidPoint = -1;
						CreateCornuAnchor(Da.endHandle[i].end_center,i);
						break;
					}
				}
				if (Da.selectEndHandle == -1) {
					for (int i=0; i<2; i++) {
						if (Da.endHandle[i].end_valid == FALSE) { continue; }
						d = FindDistance(Da.endHandle[i].end_curve,pos);
						if (IsClose(d)) {
							Da.selectEndHandle = 1+i*2;
							Da.selectEndPoint = -1;
							Da.selectMidPoint = -1;
							CreateCornuAnchor(Da.endHandle[i].end_curve,i);
							break;
						}
					}
				}
			}
		} else {      //We picked an end point
			if (!Da.trk[Da.selectEndPoint] && ((MyGetKeyState() & WKEY_SHIFT) != 0)
			    && Da.selectTrack) {	//With Shift no track -> Extend
				Da.extend[Da.selectEndPoint] = TRUE;		//Adding to end Point
				DYNARR_RESET(trkSeg_t,anchors_da);
				CreateCornuExtendAnchor(Da.pos[Da.selectEndPoint], Da.angle[Da.selectEndPoint],
				                        FALSE);
			}
		}
		if (Da.selectMidPoint ==-1 && Da.selectEndPoint ==-1
		    && Da.selectEndHandle ==-1) {
			coOrd temp_pos = pos;
			wIndex_t index;
			if (IsClose(DistanceSegs(zero,0.0,Da.crvSegs_da.cnt,&DYNARR_N(trkSeg_t,
			                         Da.crvSegs_da,0),&temp_pos,&index))) {
				//Add Point between two other points
				//Find closest two points along Track
				int closest = -1;
				wIndex_t pIndex, nIndex;
				temp_pos = Da.pos[0];
				DistanceSegs(zero,0.0,Da.crvSegs_da.cnt,&DYNARR_N(trkSeg_t,Da.crvSegs_da,0),
				             &temp_pos,&pIndex);
				if (Da.mid_points.cnt>0) {
					for (int i=0; i<Da.mid_points.cnt; i++) {
						temp_pos = DYNARR_N(coOrd,Da.mid_points,i);
						DistanceSegs(zero,0.0,Da.crvSegs_da.cnt,&DYNARR_N(trkSeg_t,Da.crvSegs_da,0),
						             &temp_pos,&nIndex);
						if (((pIndex<=index) && (nIndex>=index))) {
							closest = i;
							break;
						}
						pIndex = nIndex;
					}
					temp_pos = Da.pos[1];
					DistanceSegs(zero,0.0,Da.crvSegs_da.cnt,&DYNARR_N(trkSeg_t,Da.crvSegs_da,0),
					             &temp_pos,&nIndex);
					if (index == nIndex) { closest = Da.mid_points.cnt; }
					if (closest == -1) {
						closest = Da.mid_points.cnt;
					}
				} else { closest = 0; }
				DYNARR_APPEND(coOrd,Da.mid_points,1);
				for (int i=Da.mid_points.cnt-1; i>closest; i--) {
					DYNARR_N(coOrd,Da.mid_points,i) = DYNARR_N(coOrd,Da.mid_points,i-1);
				}
				DYNARR_N(coOrd,Da.mid_points,closest) = pos;
				Da.selectMidPoint = closest;
				Da.number_of_points++;
				CreateCornuAnchor(pos,FALSE);
				InfoMessage("Pin Point Added");
			} else {
				wBeep();
				InfoMessage("Add Point Is Not on Track");
				return C_CONTINUE;
			}
		}
		if (Da.selectEndPoint == -1  && Da.selectMidPoint == -1
		    && Da.selectEndHandle ==-1) {
			wBeep();
			InfoMessage( _("Not close enough to track or point, reselect") );
			return C_CONTINUE;
		} else {
			if (Da.selectEndPoint >=0 ) {
				pos = Da.pos[Da.selectEndPoint];
				if (Da.extend[Da.selectEndPoint]) {
					InfoMessage( _("Drag out end of Cornu"));
				} else if (Da.trk[Da.selectEndPoint]) {
					InfoMessage( _("Drag along end of track"));
				} else {
					InfoMessage( _("Drag to move"));
				}
			} else if (Da.selectMidPoint >=0 ) {
				pos = DYNARR_N(coOrd,Da.mid_points,Da.selectMidPoint);
				InfoMessage( _("Drag point to new location, Delete to remove"));
			} else {
				if (Da.selectEndHandle%2 == 0) {
					pos = Da.endHandle[Da.selectEndHandle/2].end_center;
					InfoMessage( _("Drag to change end radius"));
				} else {
					pos = Da.endHandle[Da.selectEndHandle/2].end_curve;
					InfoMessage( _("Drag to change end angle"));
				}
			}
			Da.state = POINT_PICKED;
		}
		CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
		               Da.prevSelected);
		SetUpCornuParms(&cp);
		if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
		else { Da.crvSegs_da_cnt = 0; }
		Da.minRadius = CornuMinRadius(Da.pos, Da.crvSegs_da);
		return C_CONTINUE;

	case C_MOVE:
		DYNARR_RESET(trkSeg_t,anchors_da);
		if (Da.state != POINT_PICKED) {
			InfoMessage(
			        _("Pick any circle to adjust or add - Enter to accept, Esc to cancel"));
			return C_CONTINUE;
		}
		if (Da.selectEndPoint >= 0) {
			//If locked, reset pos to be on line from other track
			int sel = Da.selectEndPoint;
			coOrd pos2 = pos;
			BOOL_T inside = FALSE;
			if (Da.trk[sel]) {										//Track
				if (OnTrack(&pos,FALSE,TRUE) == Da.trk[sel]) {		//And the pos is on it
					inside = TRUE;
					if (!QueryTrack(Da.trk[Da.selectEndPoint],Q_CORNU_CAN_MODIFY)) {  //Turnouts
						InfoMessage(_("Track can't be split"));
						inside = FALSE;
						if (Da.ep[sel]>=0)	{										//If not turntable
							Da.pos[sel] = pos = GetTrkEndPos(Da.trk[sel],Da.ep[sel]);
						} else {
							if (QueryTrack(Da.trk[sel],Q_CAN_ADD_ENDPOINTS)) {    //Turntable
								trackParams_t tp;
								if (!GetTrackParams(PARAMS_CORNU, Da.trk[sel], pos, &tp)) { return C_CONTINUE; }
								ANGLE_T a = tp.angle;
								Translate(&pos,tp.ttcenter,a,tp.ttradius);
								Da.angle[sel] = NormalizeAngle(a+180);
								SetUpCornuParms(&cp);
								if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
								else { Da.crvSegs_da_cnt = 0; }
							} else { return C_CONTINUE; }
						}
					}
				} else {
					pos = pos2;				//Put Back to original position as outside track
				}
				if (!inside) {
					if (Da.ep[sel]>=0) {				//Track defined end point
						ANGLE_T diff = NormalizeAngle(GetTrkEndAngle(Da.trk[sel],
						                              Da.ep[sel])-FindAngle(GetTrkEndPos(Da.trk[sel],Da.ep[sel]),pos));
						if (diff>90.0
						    && diff<270.0) {  //The point is not on track but outside cone of end angle+/-90
							Da.pos[sel] = pos = GetTrkEndPos(Da.trk[sel],Da.ep[sel]);
							CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
							               Da.prevSelected);
							return C_CONTINUE;
						}
					} else {							//Not an end point
						if (QueryTrack(Da.trk[sel],Q_CAN_ADD_ENDPOINTS)) {    //Turntable
							trackParams_t tp;
							if (!GetTrackParams(PARAMS_CORNU, Da.trk[sel], pos, &tp)) { return C_CONTINUE; }
							ANGLE_T a = tp.angle;
							coOrd edge;
							Translate(&edge,tp.ttcenter,a,tp.ttradius);
							ANGLE_T da = DifferenceBetweenAngles(FindAngle(edge,pos),a);
							DIST_T d = fabs(FindDistance(edge,pos)*cos(R2D(da)));
							Translate(&pos,edge,a,d);
							Da.angle[sel] = NormalizeAngle(a+180);
							Da.pos[sel] = pos;
							CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
							               Da.prevSelected);
							Da.extendSeg[sel].type = SEG_STRTRK;
							Da.extendSeg[sel].lineWidth = 0;
							Da.extendSeg[sel].color = wDrawColorBlack;
							Da.extendSeg[sel].u.l.pos[1-sel] = pos;
							Da.extendSeg[sel].u.l.pos[sel] = edge;
							Da.extend[sel] = TRUE;
							SetUpCornuParms(&cp);
							if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
							else { Da.crvSegs_da_cnt = 0; }
							return C_CONTINUE;        //Stop moving end point
						} else { return C_CONTINUE; }
					}
				}
				// Stop the user extending right through the other track
				if (Da.ep[sel]>=0
				    && QueryTrack(Da.trk[sel],Q_CORNU_CAN_MODIFY)) { //For non-turnouts
					if ((!QueryTrack(Da.trk[sel],
					                 Q_CAN_ADD_ENDPOINTS))        // Not Turntable - may not be needed
					    && (!QueryTrack(Da.trk[sel],
					                    Q_HAS_VARIABLE_ENDPOINTS))) { // Not Helix or a Circle
						DIST_T ab = FindDistance(GetTrkEndPos(Da.trk[sel],Da.ep[sel]),
						                         GetTrkEndPos(Da.trk[sel],1-Da.ep[sel]));
						DIST_T ac = FindDistance(GetTrkEndPos(Da.trk[sel],Da.ep[sel]),pos);
						DIST_T cb = FindDistance(GetTrkEndPos(Da.trk[sel],1-Da.ep[sel]),pos);
						if (cb<minLength) {
							InfoMessage(_("Too close to other end of selected Track"));
							return C_CONTINUE;
						}
						if ((ac>=cb) && (ac>=ab)) { //Closer to far end and as long as the track
							pos = GetTrkEndPos(Da.trk[sel],1-Da.ep[sel]);  //Make other end of track
						}
					}
				} else if (Da.ep[sel]>=0
				           && inside) {                     //Has a point and inside track
					InfoMessage(
					        _("Can't move end inside a turnout"));	  //Turnouts are stuck to end-point
					Da.pos[sel] = pos = GetTrkEndPos(Da.trk[sel],Da.ep[sel]);
					CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
					               Da.prevSelected);
					return C_CONTINUE;
				}
			}
			if(!Da.trk[sel]) {			//Cornu with no end
				if (((MyGetKeyState() & WKEY_SHIFT) != 0)
				    && Da.selectTrack) {   //Extend end locked
					SetUpCornuParms(&cp);
					CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,FALSE);
					if (Da.radius[sel] == 0)  {                //Straight
						Da.extendSeg[sel].type = SEG_STRTRK;
						Da.extendSeg[sel].lineWidth = 0;
						Da.extendSeg[sel].color = wDrawColorBlack;
						Da.extendSeg[sel].u.l.pos[1-sel] = Da.pos[sel];
						d = FindDistance( Da.extendSeg[sel].u.l.pos[1-sel], pos );
						a = NormalizeAngle(Da.angle[sel]-FindAngle(pos,Da.pos[sel]));
						if (cos(D2R(a))<=0) {
							Translate( &Da.extendSeg[sel].u.l.pos[sel],
							           Da.extendSeg[sel].u.l.pos[1-sel],
							           Da.angle[sel], - d * cos(D2R(a)));
							pos = Da.extendSeg[sel].u.l.pos[sel];
							Da.extend[sel] = TRUE;
						} else { Da.extend[sel] = FALSE; }
					} else {                                //Curve
						Da.extendSeg[sel].type = SEG_CRVTRK;
						Da.extendSeg[sel].lineWidth = 0;
						Da.extendSeg[sel].color = wDrawColorBlack;
						Da.extendSeg[sel].u.c.center = Da.center[sel];
						Da.extendSeg[sel].u.c.radius = Da.radius[sel];
						a = FindAngle( Da.center[sel], pos );
						PointOnCircle( &pos, Da.extendSeg[sel].u.c.center, Da.radius[sel], a );
						a2 = FindAngle(Da.extendSeg[sel].u.c.center,Da.pos[sel]);
						if (((Da.angle[sel] < 180) && (a2>90 && a2<270)) ||
						    ((Da.angle[sel] > 180) && (a2<90 || a2>270))) {
							Da.extendSeg[sel].u.c.a0 = a;
							Da.extendSeg[sel].u.c.a1 = NormalizeAngle(a2-a);
						} else {
							Da.extendSeg[sel].u.c.a0 = a2;
							Da.extendSeg[sel].u.c.a1 = NormalizeAngle(a-a2);
						}
						if (Da.extendSeg[sel].u.c.a1 == 0 || Da.extendSeg[sel].u.c.a1 >180 ) {
							Da.extend[sel] = FALSE;
						} else {
							Da.extend[sel] = TRUE;
						}
					}
				} else {
					Da.extend[sel] = FALSE;
					coOrd offset;							//Just move end (no shift)
					offset.x = pos.x-Da.pos[sel].x;
					offset.y = pos.y-Da.pos[sel].y;
					Da.pos[sel] = pos;
					if (Da.radius[sel] >0.0) {
						Da.center[sel].x += offset.x;
						Da.center[sel].y += offset.y;
					}
					if (Da.selectTrack) {					//We have track
						if (!Da.trk[sel]
						    && ((t = OnTrackIgnore(&pos,FALSE,TRUE,Da.selectTrack))!= NULL) ) {
							if ((ep = PickUnconnectedEndPointSilent(pos,t))>=0) {
								pos = GetTrkEndPos(t,ep);
								if (IsClose(FindDistance(pos,pos)/2)) {
									CreateCornuEndAnchor(pos,FALSE);
								}
							}
						}
					} else {									//Not yet a track
						coOrd p = pos;
						Da.angle[sel] = GetOpenAngle(Da.pos,Da.angle,sel);
						if ((t = OnTrack(&p,FALSE,TRUE)) !=NULL ) {
							if ((ep = PickUnconnectedEndPointSilent(pos,t))>=0) {
								p = GetTrkEndPos(t,ep);
								if (IsClose(FindDistance(p,pos)/2)) {
									CreateCornuEndAnchor(p,FALSE);
								}
							}
						}
					}
				}
			} else {									//Cornu with ends
				if (inside) { Da.pos[sel] = pos; }
				if (!GetConnectedTrackParms(Da.trk[sel],pos,sel,Da.ep[sel],inside?FALSE:TRUE)) {
					wBeep();
					return C_CONTINUE;											//Stop drawing
				}
				CorrectHelixAngles();
				if (!inside) {										 //Extend the track
					if (Da.trackType[sel] == curveTypeStraight) {    //Extend with a straight
						Da.extendSeg[sel].type = SEG_STRTRK;
						Da.extendSeg[sel].lineWidth = 0;
						Da.extendSeg[sel].color = wDrawColorBlack;
						if (Da.ep[sel]>=0) {
							Da.extendSeg[sel].u.l.pos[0] = GetTrkEndPos( Da.trk[sel], Da.ep[sel] );
							a = NormalizeAngle(Da.angle[sel]-FindAngle(pos,GetTrkEndPos(Da.trk[sel],
							                   Da.ep[sel])));
						} else {												//Turntable when unconnected
							Da.extendSeg[sel].u.l.pos[0] = Da.pos[sel];
							a = NormalizeAngle(Da.angle[sel]-FindAngle(pos,Da.pos[sel]));
						}
						// Remove any extend in opposite direction for Turntable/Turnouts
						if ((QueryTrack(Da.trk[sel],Q_CAN_ADD_ENDPOINTS)  && Da.ep[sel]>=0)
						    && (!QueryTrack(Da.trk[sel],Q_CORNU_CAN_MODIFY))
						    && (a>90 && a<270)) {
							Da.extend[sel] =
							        FALSE;    //Turntable with point and extension is other side of well
							Da.pos[sel] = GetTrkEndPos(Da.trk[sel],Da.ep[sel]);
						} else {
							Da.extend[sel] = TRUE;
							d = FindDistance( Da.extendSeg[sel].u.l.pos[0], pos );
							Translate( &Da.extendSeg[sel].u.l.pos[1],
							           Da.extendSeg[sel].u.l.pos[0],
							           Da.angle[sel], -d * cos(D2R(a)));
							Da.pos[sel] = pos = Da.extendSeg[sel].u.l.pos[1];
						}
					} else if (Da.trackType[sel] == curveTypeCurve) {       //Extend with temp curve
						Da.extendSeg[sel].type = SEG_CRVTRK;
						Da.extendSeg[sel].lineWidth = 0;
						Da.extendSeg[sel].color = wDrawColorBlack;
						Da.extendSeg[sel].u.c.center = Da.center[sel];
						Da.extendSeg[sel].u.c.radius = Da.radius[sel];
						a = FindAngle( Da.center[sel], pos );
						PointOnCircle( &pos, Da.center[sel], Da.radius[sel], a );
						a2 = FindAngle(Da.center[sel],GetTrkEndPos(Da.trk[sel],Da.ep[sel]));
						if ((Da.angle[sel] < 180 && (a2>90 && a2 <270))  ||
						    (Da.angle[sel] > 180 && (a2<90 || a2 >270))) {
							Da.extendSeg[sel].u.c.a0 = a2;
							Da.extendSeg[sel].u.c.a1 = NormalizeAngle(a-a2);
						} else {
							Da.extendSeg[sel].u.c.a0 = a;
							Da.extendSeg[sel].u.c.a1 = NormalizeAngle(a2-a);
						}
						if (Da.extendSeg[sel].u.c.a1 == 0.0 || Da.extendSeg[sel].u.c.a1 >180
						    || (Da.extendSeg[sel].u.c.a0 >= Da.arcA0[sel]
						        && Da.extendSeg[sel].u.c.a0 < Da.arcA0[sel]+Da.arcA1[sel]
						        && Da.extendSeg[sel].u.c.a0 + Da.extendSeg[sel].u.c.a1 <= Da.arcA0[sel] +
						        Da.arcA1[sel])
						   ) {
							Da.extend[sel] = FALSE;
							Da.pos[sel] = pos;
						} else {
							Da.extend[sel] = TRUE;
							Da.pos[sel] = pos;
						}

					} else {	//Bezier and Cornu that we are joining TO can't extend
						wBeep();
						InfoMessage(_("Can't extend connected Bezier or Cornu"));
						pos = GetTrkEndPos(Da.trk[sel],Da.ep[sel]);
						return C_CONTINUE;
					}
				} else { Da.pos[sel] = pos; }
			}
		} else if (Da.selectMidPoint >=0) {
			DYNARR_N(coOrd,Da.mid_points,Da.selectMidPoint) = pos;
		} else if (Da.selectEndHandle >=0) {						//Cornu has no end, so has handles
			int end = Da.selectEndHandle/2;
			if (Da.selectEndHandle%2 == 0) {						//Radius
				coOrd p0 = Da.pos[end];								//Start
				coOrd p1 = Da.endHandle[end].end_curve;				//End
				ANGLE_T a0 = FindAngle( p1, p0 );
				DIST_T d0 = FindDistance( p0,
				                          p1 )/2.0;             //Distance to Middle of Chord
				coOrd pos2 = pos;									//New pos
				Rotate( &pos2, p1, -a0 );
				pos2.x -= p1.x;										//Deflection at right angles to Chord
				DIST_T r = 1000.0;
				if ( fabs(pos2.x) >= 0.01 ) {						//Not zero
					double d2 = sqrt( d0*d0 + pos2.x*pos2.x )/2.0;
					r = d2*d2*2.0/pos2.x;
					if ( fabs(r) > 1000.0 )	 {						//Limit Radius
						r = 0.0;
						//r = ((r > 0) ? 1 :  -1 ) *1000.0;
					}
				} else {
					r = 0.0;
					//r = ((r > 0) ? 1 :  -1 ) *1000.0;
				}
				coOrd posx; //Middle of chord
				posx.x = (p1.x-p0.x)/2.0 + p0.x;
				posx.y = (p1.y-p0.y)/2.0 + p0.y;
				a0 -= 90.0;
				if (r<0) {											//Negative radius means other side
					coOrd pt = p0;
					p0 = p1;
					p1 = pt;
					a0 += 180.0;
				}
				coOrd pc;
				if (r == 0.0) {
					Da.center[end] = zero;
					Da.radius[end] = 0.0;
					Da.angle[end] = FindAngle(Da.pos[end],Da.endHandle[end].end_curve);
				} else {
					Translate( &pc, posx, a0,
					           fabs(r) - fabs(pos2.x) );	//Move Radius less Deflection to get to center
					Da.center[end] = pc;
					if (DifferenceBetweenAngles(FindAngle(Da.center[end],Da.pos[end]),
					                            FindAngle(Da.center[end],Da.endHandle[end].end_curve))>0.0) {
						Da.angle[end] = NormalizeAngle(FindAngle(Da.center[end],Da.pos[end])+90.0);
					} else {
						Da.angle[end] = NormalizeAngle(FindAngle(Da.center[end],Da.pos[end])-90.0);
					}
					Da.radius[end] = fabs(r);
				}
			} else {
				Da.angle[end] = FindAngle(Da.pos[end],pos);
				Da.radius[end] = 0.0;
				Translate(&Da.center[end],Da.pos[end],NormalizeAngle(Da.angle[end]+90.0),
				          Da.radius[end]);
			}
		}
		CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
		               Da.prevSelected);
		SetUpCornuParms(
		        &cp);    //In case we want to use these because the ends are not on the track
		if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
		else { Da.crvSegs_da_cnt = 0; }
		for (int i=0; i<2; i++) {
			if (Da.trk[i] || Da.ends[i]) { continue; }
			coOrd p = Da.pos[i];
			Da.angle[i] = NormalizeAngle((i?0:180)+GetAngleSegs( Da.crvSegs_da_cnt,
			                             &DYNARR_N(trkSeg_t,Da.crvSegs_da,0), &p, NULL, NULL, NULL, NULL, NULL));
			Da.radius[i] = 0.0;
		}
		Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
		DIST_T rin = Da.radius[0];
		InfoMessage(
		        _("Cornu : Min Radius=%s MaxRateofCurveChange/Scale=%s Length=%s Winding Arc=%s"),
		        FormatDistance(Da.minRadius),
		        FormatFloat(CornuMaxRateofChangeofCurvature(Da.pos,Da.crvSegs_da,
		                        &rin)*GetScaleRatio(GetLayoutCurScale())),
		        FormatDistance(CornuLength(Da.pos,Da.crvSegs_da)),
		        FormatDistance(CornuTotalWindingArc(Da.pos,Da.crvSegs_da)));
		return C_CONTINUE;

	case C_UP:
		DYNARR_RESET(trkSeg_t,anchors_da);
		if (Da.state != POINT_PICKED) {
			Da.state = PICK_POINT;
			return C_CONTINUE;
		}
		ep = 0;
		if (Da.selectMidPoint!=-1) { Da.prevSelected = Da.selectMidPoint; }
		else if (Da.selectEndPoint!=-1) {
			if (!Da.trk[Da.selectEndPoint] &&
			    (t=OnTrack(&pos,FALSE,TRUE)) != NULL && t != Da.selectTrack	) {
				EPINX_T ep = PickUnconnectedEndPoint(pos,t);
				if (ep>=0) {
					if (QueryTrack(t,
					               Q_HAS_VARIABLE_ENDPOINTS)) {    //Circle/Helix find if there is an open slot and where
						if ((GetTrkEndTrk(t,0) != NULL) && (GetTrkEndTrk(t,1) != NULL)) {
							InfoMessage(_("Helix Already Connected"));
							return C_CONTINUE;
						}
						ep = -1;                                            //Not a real ep yet
					} else { ep = PickUnconnectedEndPointSilent(pos, t); }		//EP
					if (ep>=0 && QueryTrack(t,Q_CAN_ADD_ENDPOINTS)) {
						ep=-1;  		            //Don't attach to Turntable
						trackParams_t tp;
						if (!GetTrackParams(PARAMS_CORNU, t, pos, &tp)) { return C_CONTINUE; }
						ANGLE_T a = tp.angle;
						Translate(&pos,tp.ttcenter,a,tp.ttradius);
					}
					if ( ep==-1 && (!QueryTrack(t,Q_CAN_ADD_ENDPOINTS)
					                && !QueryTrack(t,
					                               Q_HAS_VARIABLE_ENDPOINTS))) {  //No endpoints and not Turntable or Helix/Circle
						wBeep();
						InfoMessage(_("No Valid end point on that track"));
						return C_CONTINUE;
					}
					if (GetTrkScale(t) != (char)GetLayoutCurScale()) {
						wBeep();
						InfoMessage(_("Track is different scale"));
						return C_CONTINUE;
					}
				}
				if (ep>=0 && t) {				//Real end point, real track
					Da.trk[Da.selectEndPoint] = t;
					Da.ep[Da.selectEndPoint] = ep;           // Note: -1 for Turntable or Circle
					pos = GetTrkEndPos(t,ep);
					Da.pos[Da.selectEndPoint] = pos;
					if (!GetConnectedTrackParms(t,pos,Da.selectEndPoint,ep,FALSE)) { return C_CONTINUE; }
				}
			} else {
				cornuModCmdContext.angle = NormalizeAngle(Da.angle[Da.selectEndPoint]);
				cornuModCmdContext.radius = Da.radius[Da.selectEndPoint];
				if (DifferenceBetweenAngles(FindAngle(Da.center[Da.selectEndPoint],
				                                      Da.pos[Da.selectEndPoint]),Da.angle[Da.selectEndPoint])<0.0) {
					cornuModCmdContext.radius = -cornuModCmdContext.radius;
				}
				controls[0] = cornuModEndRadiusPD.control;
				controls[1] = cornuModEndAnglePD.control;
				controls[2] = NULL;
				labels[0] = N_("End Radius");
				labels[1] = N_("End Angle");
				ParamLoadControls( &cornuModPG );
				InfoSubstituteControls( controls, labels );
				cornuModEndRadiusPD.option &= ~PDO_NORECORD;
				cornuModEndAnglePD.option &= ~PDO_NORECORD;
				infoSubst = TRUE;
				Da.prevSelected = Da.selectEndPoint;
				Da.selectEndHandle = -1;
			}
		} else if (Da.selectEndHandle!=-1) {
			Da.prevSelected = Da.selectEndHandle>2?1:0;
			cornuModCmdContext.angle = NormalizeAngle(Da.angle[Da.prevSelected]);
			cornuModCmdContext.radius = Da.radius[Da.prevSelected];
			if (DifferenceBetweenAngles(FindAngle(Da.center[Da.prevSelected],
			                                      Da.pos[Da.prevSelected]),Da.angle[Da.prevSelected])<0.0) {
				cornuModCmdContext.radius = -cornuModCmdContext.radius;
			}
			controls[0] = cornuModEndRadiusPD.control;
			controls[1] = cornuModEndAnglePD.control;
			controls[2] = NULL;
			labels[0] = N_("End Radius");
			labels[1] = N_("End Angle");
			ParamLoadControls( &cornuModPG );
			InfoSubstituteControls( controls, labels );
			cornuModEndRadiusPD.option &= ~PDO_NORECORD;
			cornuModEndAnglePD.option &= ~PDO_NORECORD;
			infoSubst = TRUE;
			Da.selectEndHandle = -1;
		}
		Da.selectEndPoint = -1; Da.selectMidPoint = -1;
		CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
		               Da.prevSelected);
		SetUpCornuParms(&cp);
		if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
		else { Da.crvSegs_da_cnt = 0; }
		Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
		InfoMessage(
		        _("Pick on point to adjust it along track - Delete to remove, Enter to confirm, ESC to abort"));
		Da.state = PICK_POINT;
		return C_CONTINUE;

	case C_TEXT:
		DYNARR_RESET(trkSeg_t,anchors_da);
		//Delete or backspace deletes last selected index
		if (action>>8 == 127 || action>>8 == 8) {
			if ((Da.state == PICK_POINT) && Da.prevSelected !=-1) {
				for (int i=Da.prevSelected; i<Da.mid_points.cnt; i++) {
					DYNARR_N(coOrd,Da.mid_points,i) = DYNARR_N(coOrd,Da.mid_points,i+1);
				}
				Da.mid_points.cnt--;
			}
			Da.prevSelected = -1;
			CreateBothEnds(Da.selectEndPoint,Da.selectMidPoint,Da.selectEndHandle,
			               Da.prevSelected);
			cornuParm_t cp;
			SetUpCornuParms(&cp);
			if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
			else { Da.crvSegs_da_cnt = 0; }
			return C_CONTINUE;
		}
		return C_CONTINUE;

	case C_OK:                            //C_OK is not called by Modify.
		DYNARR_RESET(trkSeg_t,anchors_da);
		if ( Da.state == PICK_POINT ) {
			Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
			if (CornuTotalWindingArc(Da.pos,Da.crvSegs_da)>4*360) {
				wBeep();
				InfoMessage(_("Cornu has too complex shape - adjust end pts"));
				return C_CONTINUE;
			}
			if (!CheckHelix(NULL)) {
				wBeep();
				return C_CONTINUE;
			}
			for (int i=0; i<2; i++) {
				if (Da.trk[i]
				    && !(QueryTrack(Da.trk[i],Q_CAN_ADD_ENDPOINTS))) {        // Not Turntable
					if (FindDistance(Da.pos[i],GetTrkEndPos(Da.trk[i],1-Da.ep[i])) < minLength) {
						wBeep();
						InfoMessage(
						        _("Cornu point %d too close to other end of connect track - reposition it"),
						        i+1);
						return C_CONTINUE;
					}
				}
			}
			UndoStart( _("Create Cornu"),"newCornu curves");
			BOOL_T end_point[2];
			end_point[0] = TRUE;
			end_point[1] = FALSE;
			coOrd sub_pos[2];
			sub_pos[0] = Da.pos[0];
			if (Da.radius[0] == -1) { end_point[0] = FALSE; }
			track_p first_trk= NULL,trk1=NULL,trk2 = NULL;

			for (int i=0; i<Da.mid_points.cnt; i++) {
				sub_pos[1] = DYNARR_N(coOrd,Da.mid_points,i);
				if ((trk1 = CreateCornuFromPoints(sub_pos,end_point))== NULL) { return C_TERMINATE; }
				if (Da.trk[0]) {
					CopyAttributes( Da.trk[0], trk1 );
				} else if (Da.trk[1]) {
					CopyAttributes( Da.trk[1], trk1 );
				} else {
					SetTrkScale( trk1, GetLayoutCurScale() );
					SetTrkBits( trk1, TB_HIDEDESC );
				}
				DrawNewTrack(trk1);
				if (first_trk == NULL) { first_trk = trk1; }
				if (trk2) { ConnectTracks(trk1,0,trk2,1); }
				trk2 = trk1;
				end_point[0] = FALSE;
				sub_pos[0] = DYNARR_N(coOrd,Da.mid_points,i);
			}
			sub_pos[1] = Da.pos[1];
			end_point[1] = TRUE;
			if (Da.radius[1] == -1) { end_point[1] = FALSE; }
			if ((trk1 = CreateCornuFromPoints(sub_pos,end_point)) == NULL) { return C_TERMINATE; }
			if (Da.trk[0]) {
				CopyAttributes( Da.trk[0], trk1 );
			} else if (Da.trk[1]) {
				CopyAttributes( Da.trk[1], trk1 );
			} else {
				SetTrkScale( trk1, GetLayoutCurScale() );
				SetTrkBits( trk1, TB_HIDEDESC );
			}
			if (trk2) { ConnectTracks(trk1,0,trk2,1); }
			if (first_trk == NULL) { first_trk = trk1; }
			//t = NewCornuTrack( Da.pos, Da.center, Da.angle, Da.radius,&DYNARR(trkSeg_t,Da.crvSegs_da,0), Da.crvSegs_da.cnt);

			for (int i=0; i<2; i++) {
				if (Da.trk[i]) {
					UndoModify(Da.trk[i]);
					MoveEndPt(&Da.trk[i],&Da.ep[i],Da.pos[i],0);
					//End position not precise, so readjust Cornu
					GetConnectedTrackParms(Da.trk[i],GetTrkEndPos(Da.trk[i],Da.ep[i]),i,Da.ep[i],
					                       FALSE);
					ANGLE_T endAngle = NormalizeAngle(GetTrkEndAngle(Da.trk[i],Da.ep[i])+180);
					SetCornuEndPt(i==0?first_trk:trk1,i,GetTrkEndPos(Da.trk[i],Da.ep[i]),
					              Da.center[i],endAngle,Da.radius[i]);
					if (Da.ep[i]>=0) {
						ConnectTracks(Da.trk[i],Da.ep[i],i==0?first_trk:trk1,i);
					}
				}
			}
			UndoEnd();
			if (infoSubst) {
				InfoSubstituteControls( NULL, NULL );
				infoSubst = FALSE;
			}
			Da.state = NONE;
			return C_TERMINATE;
		}
		return C_CONTINUE;

	case C_REDRAW:
		if (Da.state == NONE) { return C_CONTINUE; }
		DrawTempCornu();
		DrawSegsDA( &tempD, NULL, zero, 0.0, &anchors_da, trackGauge, wDrawColorBlack,
		            0 );
		if (Da.state == POINT_PICKED) { wSetCursor(mainD.d,wCursorNone); }
		return C_CONTINUE;
	case C_CANCEL:
	case C_FINISH:
		break;

	default:
		return C_CONTINUE;
	}

	return C_CONTINUE;

}

static void cornuModDlgUpdate(
        paramGroup_p pg,
        int inx,
        void * valueP )
{
	AdjustCornuCurve(C_UPDATE, zero, InfoMessage);
	ParamLoadControl(&cornuModPG,cornuModEndRadius);			 	// Make sure Radius updated
	ParamLoadControl(&cornuModPG,cornuModEndAngle);				//Relative Angle as well
	TempRedraw();

}

/**
 * CmdCornuModify
 *
 * Called from Modify Command - this function deals with the real (old) track and calls AdjustCornuCurve to tune up the new one
 * Sequence is this -
 * - The C_START is called from CmdModify C_DOWN action if a track has being selected. The old track is hidden, the editable one is shown.
 * - C_MOVES will be ignored until a C_UP ends the track selection and moves the state to PICK_POINT,
 * - C_DOWN then hides the track and shows the Cornu circles. Selects a point (if close enough and available) and the state moves to POINT_PICKED
 * - C_MOVE drags the point around modifying the curve
 * - C_UP puts the state back to PICK_POINT (pick another)
 * - C_OK (Enter/Space) creates the new track, deletes the old and shows the changed track.
 * - C_CANCEL (Esc) sets the state to NONE and reshows the original track unchanged.
 *
 */
STATUS_T CmdCornuModify (track_p trk, wAction_t action, coOrd pos,
                         DIST_T trackG )
{

	Da.trackGauge = trackG;

	Da.commandType = CORNU_MODIFY;

	switch (action&0xFF) {
	case C_START:
		Da.state = NONE;
		DYNARR_RESET(trkSeg_t,Da.crvSegs_da);
		Da.ep1Segs_da_cnt = 0;
		Da.ep2Segs_da_cnt = 0;
		Da.crvSegs_da_cnt = 0;
		DYNARR_RESET( trkSeg_t*, Da.midSegs );
		Da.extend[0] = FALSE;
		Da.extend[1] = FALSE;
		Da.selectEndPoint = -1;
		Da.selectTrack = NULL;
		DYNARR_RESET(coOrd,Da.mid_points);
		DYNARR_RESET(track_p,Da.tracks);


		Da.selectTrack = trk;
		DYNARR_APPEND(track_p,Da.tracks,1);
		DYNARR_LAST(track_p,Da.tracks) = trk;
		Da.trk[0] = GetTrkEndTrk( trk, 0 );
		track_p prior = trk;
		if (Da.trk[0]) { Da.ep[0] = GetEndPtConnectedToMe(Da.trk[0],trk); }
		EPINX_T ep0 = 0;
		//Move down the LHS adding tracks until no more Cornu
		while (Da.trk[0] && QueryTrack(Da.trk[0],Q_IS_CORNU)) {
			prior = Da.trk[0];
			ep0 = 1-Da.ep[0];
			DYNARR_APPEND(track_p,Da.tracks,1);
			DYNARR_LAST(track_p,Da.tracks) = prior;
			DYNARR_APPEND(coOrd,Da.mid_points,1);
			for (int i=Da.mid_points.cnt-1; i>0; i--) {
				DYNARR_N(coOrd,Da.mid_points,i) = DYNARR_N(coOrd,Da.mid_points,i-1);
			}
			DYNARR_N(coOrd,Da.mid_points,0) = GetTrkEndPos(prior,1-ep0);
			Da.trk[0] = GetTrkEndTrk( prior, ep0 );
			if (Da.trk[0]) { Da.ep[0] = GetEndPtConnectedToMe(Da.trk[0],prior); }
			else { Da.ep[0] = -1; }
		}
		if (prior) {
			struct extraDataCornu_t *xx0 = GET_EXTRA_DATA(prior, T_CORNU, extraDataCornu_t);
			Da.pos[0] = xx0->pos[ep0];              //Copy parms from FIRST CORNU trk
			Da.radius[0] = xx0->r[ep0];
			Da.angle[0] = xx0->a[ep0];
			Da.center[0] = xx0->c[ep0];
		}

		//Move to RHS

		Da.trk[1] = GetTrkEndTrk( trk, 1 );
		track_p next = trk;
		EPINX_T ep1 = 1;
		if (Da.trk[1]) { Da.ep[1] = GetEndPtConnectedToMe(Da.trk[1],trk); }
		//Move down RHS adding tracks until no more Cornu
		while (Da.trk[1] && QueryTrack(Da.trk[1],Q_IS_CORNU)) {
			next = Da.trk[1];
			ep1 = 1-Da.ep[1];
			DYNARR_APPEND(track_p,Da.tracks,1);
			DYNARR_LAST(track_p,Da.tracks) = next;
			DYNARR_APPEND(coOrd,Da.mid_points,1);
			DYNARR_LAST(coOrd,Da.mid_points) = GetTrkEndPos(next,1-ep1);
			Da.trk[1] = GetTrkEndTrk( next, ep1 );
			if (Da.trk[1]) { Da.ep[1] = GetEndPtConnectedToMe(Da.trk[1],next); }
		}

		if (next) {
			struct extraDataCornu_t *xx1 = GET_EXTRA_DATA(next, T_CORNU, extraDataCornu_t);
			Da.pos[1] = xx1->pos[ep1];              //Copy parms from LAST CORNU trk
			Da.radius[1] = xx1->r[ep1];
			Da.angle[1] = xx1->a[ep1];
			Da.center[1] = xx1->c[ep1];
		}

		InfoMessage(_("Now Select or Add (+Shift) a Point"));
		Da.state = TRACK_SELECTED;
		for (int i=0; i<Da.tracks.cnt; i++) {
			DrawTrack(DYNARR_N(track_p,Da.tracks,i),&mainD,
			          wDrawColorWhite);  //Wipe out real tracks, draw replacement
		}
		return AdjustCornuCurve(C_START, pos, InfoMessage);

	case wActionMove:
		return AdjustCornuCurve(wActionMove, pos, InfoMessage);
		break;

	case C_DOWN:
		if (Da.state == TRACK_SELECTED) { return C_CONTINUE; }                   //Ignore until first up
		return AdjustCornuCurve(C_DOWN, pos, InfoMessage);

	case C_LCLICK:
		if (Da.state == TRACK_SELECTED) { return C_CONTINUE; }                   //Ignore until first up
		AdjustCornuCurve(C_DOWN, pos, InfoMessage);
		return AdjustCornuCurve(C_UP, pos, InfoMessage);

	case C_MOVE:
		if (Da.state == TRACK_SELECTED) { return C_CONTINUE; }                   //Ignore until first up and down
		return AdjustCornuCurve(C_MOVE, pos, InfoMessage);

	case C_UP:
		if (Da.state == TRACK_SELECTED) {
			Da.state =
			        PICK_POINT;                                           //First time up, next time pick a point
		}
		return AdjustCornuCurve(C_UP, pos, InfoMessage);					//Run Adjust

	case C_TEXT:
		//Delete or backspace deletes last selected index
		if (action>>8 == 127 || action>>8 == 8) {
			return AdjustCornuCurve(action, pos, InfoMessage);
		}
		//Space bar or enter means done
		if ( (action>>8 != ' ') && (action>>8 != 13) ) {
			return C_CONTINUE;
		}
	/* no break */
	case C_OK:
		if (infoSubst) {
			InfoSubstituteControls( NULL, NULL );
			infoSubst = FALSE;
		}
		if (Da.state != PICK_POINT) {										//Too early - abandon
			InfoMessage(_("No changes made"));
			Da.state = NONE;
			//DYNARR_FREE(trkSeg_t,Da.crvSegs_da);
			return C_CANCEL;
		}
		if (!CheckHelix(trk)) {
			wBeep();
			return C_CONTINUE;
		}
		for (int i=0; i<2; i++) {
			if (Da.trk[i] &&
			    !(QueryTrack(Da.trk[i],Q_CAN_ADD_ENDPOINTS))) {        // Not Turntable
				if (FindDistance(Da.pos[i],GetTrkEndPos(Da.trk[i],1-Da.ep[i])) < minLength) {
					wBeep();
					InfoMessage(
					        _("Cornu end %d too close to other end of connect track - reposition it"),i+1);
					return C_CONTINUE;
				}
			}
		}
		UndoStart( _("Modify Cornu"), "newCornu - CR" );
		for (int i=0; i<2; i++) {
			if (!Da.trk[i] && Da.extend[i]) {
				if (Da.extendSeg[i].type == SEG_STRTRK) {
					Da.trk[i] = NewStraightTrack(Da.extendSeg[i].u.l.pos[0],
					                             Da.extendSeg[i].u.l.pos[1]);
					if (Da.trk[i]) { Da.ep[i] = 1-i; }
				} else {
					Da.trk[i] = NewCurvedTrack(Da.extendSeg[i].u.c.center,
					                           fabs(Da.extendSeg[i].u.c.radius),
					                           Da.extendSeg[i].u.c.a0,Da.extendSeg[i].u.c.a1,FALSE);
					if (FindDistance(GetTrkEndPos(Da.trk[i],0),Da.pos[i])<=connectDistance) {
						Da.ep[i] = 0;
					} else { Da.ep[i] = 1; }
				}
				if (!Da.trk[i]) {
					wBeep();
					InfoMessage(_("Cornu Extension Create Failed for end %d"),i);
					Da.state = NONE;
					return C_TERMINATE;
				}
				CopyAttributes(Da.selectTrack,Da.trk[i]);
			}
		}
		BOOL_T end_point[2];
		end_point[0] = TRUE;
		end_point[1] = FALSE;
		coOrd sub_pos[2];
		sub_pos[0] = Da.pos[0];

		track_p first_trk= NULL,trk1=NULL,trk2 = NULL;
		for (int i=0; i<Da.mid_points.cnt; i++) {
			sub_pos[1] = DYNARR_N(coOrd,Da.mid_points,i);
			if ((trk1 = CreateCornuFromPoints(sub_pos, end_point))== NULL) {
				wBeep();
				InfoMessage(
				        _("Cornu Create Failed for p1[%0.3f,%0.3f] p2[%0.3f,%0.3f], c1[%0.3f,%0.3f] c2[%0.3f,%0.3f], a1=%0.3f a2=%0.3f, r1=%s r2=%s"),
				        Da.pos[0].x,Da.pos[0].y,
				        Da.pos[1].x,Da.pos[1].y,
				        Da.center[0].x,Da.center[0].y,
				        Da.center[1].x,Da.center[1].y,
				        Da.angle[0],Da.angle[1],
				        FormatDistance(Da.radius[0]),FormatDistance(Da.radius[1]));
				UndoUndo(NULL);
				Da.state = NONE;
				return C_TERMINATE;
			}
			if (Da.trk[0]) {
				CopyAttributes( Da.trk[0], trk1 );
			} else if (Da.trk[1]) {
				CopyAttributes( Da.trk[1], trk1 );
			} else {
				SetTrkScale( trk1, GetLayoutCurScale() );
				SetTrkBits( trk1, TB_HIDEDESC );
			}
			DrawNewTrack(trk1);
			if (first_trk == NULL) { first_trk = trk1; }
			if (trk2) { ConnectTracks(trk1,0,trk2,1); }
			trk2 = trk1;
			end_point[0] = FALSE;
			sub_pos[0] = DYNARR_N(coOrd,Da.mid_points,i);
		}
		sub_pos[1] = Da.pos[1];
		end_point[1] = TRUE;
		if ((trk1 = CreateCornuFromPoints(sub_pos,end_point)) == NULL) {
			wBeep();
			InfoMessage(
			        _("Cornu Create Failed for p1[%0.3f,%0.3f] p2[%0.3f,%0.3f], c1[%0.3f,%0.3f] c2[%0.3f,%0.3f], a1=%0.3f a2=%0.3f, r1=%s r2=%s"),
			        Da.pos[0].x,Da.pos[0].y,
			        Da.pos[1].x,Da.pos[1].y,
			        Da.center[0].x,Da.center[0].y,
			        Da.center[1].x,Da.center[1].y,
			        Da.angle[0],Da.angle[1],
			        FormatDistance(Da.radius[0]),FormatDistance(Da.radius[1]));
			UndoUndo(NULL);
			Da.state = NONE;
			return C_TERMINATE;
		}
		DrawNewTrack(trk1);
		if (Da.trk[0]) {
			CopyAttributes( Da.trk[0], trk1 );
		} else if (Da.trk[1]) {
			CopyAttributes( Da.trk[1], trk1 );
		} else {
			SetTrkScale( trk1, GetLayoutCurScale() );
			SetTrkBits( trk1, TB_HIDEDESC );
		}
		if (trk2) { ConnectTracks(trk1,0,trk2,1); }
		if (first_trk == NULL) { first_trk = trk1; }

		Da.state = NONE;       //Must do before Delete

		for (int i=0; i<Da.tracks.cnt; i++) {
			DeleteTrack(DYNARR_N(track_p,Da.tracks,i), TRUE);
		}

		if (Da.trk[0]) { UndoModify(Da.trk[0]); }
		if (Da.trk[1]) { UndoModify(Da.trk[1]); }

		for (int i=0; i<2; i++) {										//Attach new track
			if (Da.trk[i] && Da.ep[i] != -1) {						//Like the old track
				if (MoveEndPt(&Da.trk[i],&Da.ep[i],Da.pos[i],0)) {
					//Bezier split position not precise, so readjust Cornu
					GetConnectedTrackParms(Da.trk[i],GetTrkEndPos(Da.trk[i],Da.ep[i]),i,Da.ep[i],
					                       FALSE);
					ANGLE_T endAngle = NormalizeAngle(GetTrkEndAngle(Da.trk[i],Da.ep[i])+180);
					SetCornuEndPt(i==0?first_trk:trk1,i,GetTrkEndPos(Da.trk[i],Da.ep[i]),
					              Da.center[i],endAngle,Da.radius[i]);
					if (Da.ep[i]>= 0) {
						ConnectTracks(i==0?first_trk:trk1,i,Da.trk[i],Da.ep[i]);
					}
				} else {
					UndoUndo(NULL);
					wBeep();
					InfoMessage(_("Connected Track End Adjust for end %d failed"),i);
					return C_TERMINATE;
				}
			}
		}
		UndoEnd();
		Da.state = NONE;
		//DYNARR_FREE(trkSeg_t,Da.crvSegs_da)
		return C_TERMINATE;

	case C_CANCEL:
		InfoMessage(_("Modify Cornu Cancelled"));
		Da.state = NONE;
		if (infoSubst) {
			InfoSubstituteControls( NULL, NULL );
			infoSubst = FALSE;
		}
		//DYNARR_FREE(trkSeg_t,Da.crvSegs_da);
		return C_TERMINATE;

	case C_REDRAW:
		return AdjustCornuCurve(C_REDRAW, pos, InfoMessage);
	}

	return C_CONTINUE;

}

/*
 * Find length by adding up the underlying segments. The segments can be straights, curves or bezier.
 */
DIST_T CornuLength(coOrd pos[4],dynArr_t segs)
{

	DIST_T dd = 0.0;
	if (segs.cnt == 0 ) { return dd; }
	for (int i = 0; i<segs.cnt; i++) {
		trkSeg_t t = DYNARR_N(trkSeg_t, segs, i);
		if (t.type == SEG_CRVTRK || t.type == SEG_CRVLIN) {
			dd += fabs(t.u.c.radius*D2R(t.u.c.a1));
		} else if (t.type == SEG_BEZLIN || t.type == SEG_BEZTRK) {
			dd +=CornuLength(t.u.b.pos,t.bezSegs);
		} else if (t.type == SEG_STRLIN || t.type == SEG_STRTRK ) {
			dd += FindDistance(t.u.l.pos[0],t.u.l.pos[1]);
		}
	}
	return dd;
}

DIST_T CornuOffsetLength(dynArr_t segs, double offset)
{
	DIST_T dd = 0.0;
	if (segs.cnt == 0 ) { return dd; }
	for (int i = 0; i<segs.cnt; i++) {
		trkSeg_t t = DYNARR_N(trkSeg_t, segs, i);
		if (t.type == SEG_CRVTRK || t.type == SEG_CRVLIN) {
			dd += fabs((t.u.c.radius+(t.u.c.radius>0?offset:-offset))*D2R(t.u.c.a1));
		} else if (t.type == SEG_BEZLIN || t.type == SEG_BEZTRK) {
			dd +=CornuOffsetLength(t.bezSegs,offset);
		} else if (t.type == SEG_STRLIN || t.type == SEG_STRTRK ) {
			dd += FindDistance(t.u.l.pos[0],t.u.l.pos[1]);
		}
	}
	return dd;
}

DIST_T CornuMinRadius(coOrd pos[4],dynArr_t segs)
{
	DIST_T r = DIST_INF, rr;
	if (segs.cnt == 0 ) { return r; }
	for (int i = 0; i<segs.cnt; i++) {
		trkSeg_t t = DYNARR_N(trkSeg_t, segs, i);
		if (t.type == SEG_CRVTRK || t.type == SEG_CRVLIN) {
			rr = fabs(t.u.c.radius);
		} else if (t.type == SEG_BEZLIN || t.type == SEG_BEZTRK) {
			rr = CornuMinRadius(t.u.b.pos, t.bezSegs);
		} else { rr = DIST_INF; }
		if (rr<r) { r = rr; }
	}
	return r;
}

DIST_T CornuTotalWindingArc(coOrd pos[4],dynArr_t segs)
{
	DIST_T rr = 0;
	if (segs.cnt == 0 ) { return 0; }
	for (int i = 0; i<segs.cnt; i++) {
		trkSeg_t t = DYNARR_N(trkSeg_t, segs, i);
		if (t.type == SEG_CRVTRK || t.type == SEG_CRVLIN) {
			rr += t.u.c.a1;
		} else if (t.type == SEG_BEZLIN || t.type == SEG_BEZTRK) {
			rr += CornuTotalWindingArc(t.u.b.pos, t.bezSegs);
		}
	}
	return rr;
}

DIST_T CornuMaxRateofChangeofCurvature(coOrd pos[4], dynArr_t segs,
                                       DIST_T * last_c)
{
	DIST_T r_max = 0.0, rc, lc = 0.0;
	lc = * last_c;
	segProcData_t segProcData;
	if (segs.cnt == 0 ) { return r_max; }
	for (int i = 0; i<segs.cnt; i++) {
		trkSeg_t t = DYNARR_N(trkSeg_t, segs, i);
		if (t.type == SEG_FILCRCL) { continue; }
		SegProc(SEGPROC_LENGTH,&t,&segProcData);
		if (t.type == SEG_CRVTRK || t.type == SEG_CRVLIN) {
			rc = fabs(1/fabs(t.u.c.radius) - lc)/segProcData.length.length/2;
			lc = 1/fabs(t.u.c.radius);
		} else if (t.type == SEG_BEZLIN || t.type == SEG_BEZTRK) {
			rc = CornuMaxRateofChangeofCurvature(t.u.b.pos, t.bezSegs,&lc);  //recurse
		} else {
			rc = fabs(0.0-lc)/segProcData.length.length/2;
			lc = 0.0;
		}
		if (rc > r_max) { r_max = rc; }
	}
	* last_c = lc;
	return r_max;
}




/*
 * Create a Cornu Curve Track
 * Sequence is
 * 1. Place 1st End
 * 2. Place 2nd End
 * 3 to n. Select and drag around points until done
 * n+1. Confirm with enter or Cancel with Esc
 */
STATUS_T CmdCornu( wAction_t action, coOrd pos )
{
	track_p t = NULL;
	cornuParm_t cp;

	static BOOL_T lock;

	Da.commandType = CORNU_CREATE;

	Da.lineWidth = (double)lineWidth;

	Da.trackGauge = trackGauge;
	Da.selectTrack = NULL;

	switch (action&0xFF) {

	case C_START:
		lock = FALSE;
		Da.cmdType = VP2L(commandContext);
		Da.state = NONE;
		Da.selectEndPoint = -1;
		Da.selectMidPoint = -1;
		Da.endHandle[0].end_valid = FALSE;
		Da.endHandle[1].end_valid = FALSE;
		for (int i=0; i<2; i++) {
			Da.ends[i] = FALSE;
			Da.pos[i] = zero;
			Da.angle[i] = 0.0;
			Da.radius[i] = -1.0;
		}
		Da.trk[0] = Da.trk[1] = NULL;
		//tempD.orig = mainD.orig;
		DYNARR_RESET(trkSeg_t,Da.crvSegs_da);
		Da.ep1Segs_da_cnt = 0;
		Da.ep2Segs_da_cnt = 0;
		Da.crvSegs_da_cnt = 0;
		DYNARR_RESET( trkSeg_t*, Da.midSegs );
		DYNARR_RESET(coOrd,Da.mid_points);
		DYNARR_RESET(track_p,Da.tracks);
		DYNARR_RESET(trkSeg_t,anchors_da);
		Da.extend[0] = FALSE;
		Da.extend[1] = FALSE;
		if (Da.cmdType == cornuCmdCreateTrack) {
			InfoMessage( _("Left click - Start Cornu track") );
		} else if (Da.cmdType == cornuCmdHotBar) {
			InfoMessage( _("Left click - Place Flextrack") );
		} else {
			if (selectedTrackCount==0) {
				InfoMessage( _("Left click - join with Cornu track") );
			} else {
				InfoMessage(
				        _("Left click - join with Cornu track, Shift Left click - move to join") );
			}
		}
		return C_CONTINUE;

	case C_DOWN:
		DYNARR_RESET(trkSeg_t,anchors_da);
		if ( Da.state == NONE || Da.state == LOC_2) {   //Set the first or second point
			coOrd p = pos;
			t = NULL;
			int end = 0;
			if (Da.state != NONE) { end=1; }
			EPINX_T ep = -1;
			//Lock to endpoint if one is available and under pointer
			if ((t = OnTrack(&p, FALSE, TRUE)) != NULL && t != Da.selectTrack) {
				if (QueryTrack(t,
				               Q_HAS_VARIABLE_ENDPOINTS)) {    //Circle/Helix find if there is an open slot and where
					if ((GetTrkEndTrk(t,0) != NULL) && (GetTrkEndTrk(t,1) != NULL)) {
						wBeep();
						InfoMessage(_("Helix Already Connected"));
						t= NULL;
					}
					ep = -1;                                            //Not a real ep yet
				} else if (QueryTrack(t,Q_CAN_ADD_ENDPOINTS)) {
					ep=-1;  		            //Don't attach to existing Turntable ep
					trackParams_t tp;
					if (!GetTrackParams(PARAMS_CORNU, t, pos, &tp)) { return C_CONTINUE; }
					ANGLE_T a = tp.angle;
					Translate(&pos,tp.ttcenter,a,tp.ttradius);
					p = pos;										//Fix to wall of turntable initially
				} else { ep = PickUnconnectedEndPointSilent(p, t); }		//EP
				if ( t && ep==-1 && (!QueryTrack(t,Q_CAN_ADD_ENDPOINTS)
				                     && !QueryTrack(t,
				                                    Q_HAS_VARIABLE_ENDPOINTS))) {  //No endpoints and not Turntable or Helix/Circle
					wBeep();
					InfoMessage(_("No valid open endpoint on that track"));
					t = NULL;
				}
				if (t && GetTrkGauge(t) != GetScaleTrackGauge(GetLayoutCurScale())) {
					wBeep();
					InfoMessage(_("Track is different gauge"));
					t = NULL;
				}
			}
			if (ep>=0 && t) {				//Real end point, real track
				Da.trk[end] = t;
				Da.ep[end] = ep;           // Note: -1 for Turntable or Circle
				pos = GetTrkEndPos(t,ep);
				Da.pos[end] = pos;
				Da.angle[end] = GetTrkEndAngle(t,ep);
			} else if (t ==
			           NULL) {      //end not on Track, OK for CreateCornu -> empty end point
				pos = p;	//Reset to initial
				if (lock) { SnapPos( &pos ); }  //Only snap if snapped in move
				if (Da.cmdType == cornuCmdCreateTrack || Da.cmdType == cornuCmdHotBar) {
					Da.trk[end] = NULL;
					Da.pos[end] = pos;
					Da.radius[end] = -1.0;   //No End Rad for open
					if (Da.state == NONE ) {
						Da.state = POS_1;
						Da.angle[0] = 270.0;
						Da.radius[0] = 0.0;
						Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0], FALSE,TRUE,TRUE,FALSE,
						                                   Da.angle[0],Da.radius[0],zero,&Da.endHandle[0]);
						Da.ep2Segs_da_cnt = 0;
						InfoMessage( _("Drag arm in the direction of track") );
						return C_CONTINUE;
					}
					Da.state = POS_2;    //Now this is second end and it is open
					Da.selectEndPoint = 1;
					DYNARR_RESET( trkSeg_t*, Da.midSegs );
					Da.angle[1] = GetOpenAngle(Da.pos,Da.angle,1);
					Da.radius[1] = 0.0;
					CreateBothEnds(1,-1,-1,-1);
					SetUpCornuParms(&cp);
					if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) {
						Da.crvSegs_da_cnt = Da.crvSegs_da.cnt;
					}
					InfoMessage( _("Drag arm in the direction of track") );
					return C_CONTINUE;
				}
				wBeep();
				InfoMessage(
				        _("No Unconnected Track End there"));  //Not creating a Cornu - Join can't be open
				return C_CONTINUE;
			} else {
				Da.pos[end] = p;
				//Either a real end or a track but no end
			}
			if (Da.state == NONE) {
				if (!GetConnectedTrackParms(t, pos, 0, Da.ep[0],FALSE)) {  //Must get parms
					Da.trk[0] = NULL;
					Da.ep[0] = -1;
					wBeep();
					InfoMessage(_("No Valid Track End there"));
					return C_CONTINUE;
				}
				if (ep<0) {
					Da.trk[0] = t;
					Da.pos[0] = p;
					Da.ep[0] = ep;
				}
				Da.state = POS_1;
				Da.selectEndPoint = 0;        //Select first end point
				Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0], FALSE,
				                                   !QueryTrack(Da.trk[0],Q_IS_CORNU),QueryTrack(Da.trk[0],Q_CORNU_CAN_MODIFY),
				                                   Da.trk[0]!=NULL,Da.angle[0],Da.radius[0],Da.center[0],NULL);
				InfoMessage( _("Locked - Move 1st end point of Cornu track along track 1") );
				return C_CONTINUE;
			} else {					//Second Point
				if (Da.trk[0] == t) {
					ErrorMessage( MSG_JOIN_CORNU_SAME );
					Da.trk[1] = NULL;
					Da.ep[1] = -1;
					return C_CONTINUE;
				}
				if (!GetConnectedTrackParms(t, pos, 1, Da.ep[1],FALSE)) {
					Da.trk[1] = NULL;								//Turntable Fail
					wBeep();
					InfoMessage(_("No Valid Track End there"));
					return C_CONTINUE;
				}
				if (ep<0) {
					Da.trk[1] = t;
					Da.pos[1] = p;
					Da.ep[1] = -1;
					Da.radius[1] = 0.0;
				}
				CorrectHelixAngles();
				Da.selectEndPoint = 1;			//Select second end point
				Da.state = POINT_PICKED;
				InfoMessage( _("Locked - Move 2nd end point of Cornu track along track 2") );
			}
			CreateBothEnds(1,-1,-1,-1);
			SetUpCornuParms(&cp);
			if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) {
				Da.crvSegs_da_cnt = Da.crvSegs_da.cnt;
			}
			return C_CONTINUE;
		} else  {					//This is after both ends exist
			return AdjustCornuCurve( action&0xFF, pos, InfoMessage );
		}
		return C_CONTINUE;

	case wActionMove:
		lock = FALSE;
		DYNARR_RESET(trkSeg_t,anchors_da);
		if (Da.state != NONE && Da.state != LOC_2) { return C_CONTINUE; }
		if (Da.trk[0] && Da.trk[1]) { return C_CONTINUE; }
		EPINX_T ep = -1;
		t = NULL;
		if (((MyGetKeyState() & WKEY_ALT) == 0) == magneticSnap) {
			//Lock to endpoint if one is available and under pointer
			if ((t = OnTrack(&pos, FALSE, TRUE)) != NULL && t != Da.selectTrack) {
				if (QueryTrack(t,
				               Q_HAS_VARIABLE_ENDPOINTS)) {    //Circle/Helix find if there is an open slot and where
					if ((GetTrkEndTrk(t,0) != NULL) && (GetTrkEndTrk(t,1) != NULL)) {
						return C_CONTINUE;
					}
					ep = -1;                                            //Not a real ep yet
				} else { ep = PickUnconnectedEndPointSilent(pos, t); }		//EP
				if (ep>=0 && QueryTrack(t,Q_CAN_ADD_ENDPOINTS)) { ep=-1; }  		//Don't attach to Turntable
				if ( ep==-1 && (!QueryTrack(t,Q_CAN_ADD_ENDPOINTS)
				                && !QueryTrack(t,
				                               Q_HAS_VARIABLE_ENDPOINTS))) {  //No endpoints and not Turntable or Helix/Circle
					return C_CONTINUE;
				}
				if (GetTrkGauge(t) != GetScaleTrackGauge(GetLayoutCurScale())) {
					return C_CONTINUE;
				}
				if (Da.state != NONE && t==Da.trk[0]) { return C_CONTINUE; }
			}
		}
		if (ep>=0 && t) {
			pos = GetTrkEndPos(t,ep);
			CreateCornuEndAnchor(pos,TRUE);
		} else if (t) {
			trackParams_t tp;        //Turntable or extendable track
			if (!GetTrackParams(PARAMS_CORNU, t, pos, &tp)) { return C_CONTINUE; }
			if (QueryTrack(t,Q_CAN_ADD_ENDPOINTS)) {
				if (!GetTrackParams(PARAMS_CORNU, t, pos, &tp)) { return C_CONTINUE; }
				ANGLE_T a = tp.angle;
				Translate(&pos,tp.ttcenter,a,tp.ttradius);
				CreateCornuEndAnchor(pos,TRUE);
			} else { CreateCornuEndAnchor(pos,TRUE); }
		} else if (SnapPos(&pos)) {
			CreateCornuEndAnchor(pos,FALSE);
			lock = TRUE;
		}

		return C_CONTINUE;

	case C_MOVE:
		if (Da.state == NONE) {    //First point not created
			if (Da.cmdType == cornuCmdCreateTrack || Da.cmdType == cornuCmdHotBar) {
				InfoMessage("Place 1st end point of Cornu track");
			} else if (Da.cmdType == cornuJoinTrack) {
				return C_CONTINUE;
			} else {
				InfoMessage("Place 1st end point of Cornu track on unconnected end-point");
			}
			return C_CONTINUE;
		}
		if (Da.state == POS_1) {	//First point has been created
			if ((Da.cmdType == cornuCmdCreateTrack || Da.cmdType == cornuCmdHotBar)
			    && !Da.trk[0]) {  //OK for CreateCornu -> No track selected
				if (IsClose(FindDistance(pos,Da.pos[0]))) { return C_CONTINUE; }
				Da.selectEndPoint = 0;
				Da.angle[0] = NormalizeAngle(FindAngle(Da.pos[0],pos)+180);
				Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0],TRUE,TRUE,TRUE,FALSE,
				                                   Da.angle[0],0.0,zero,&Da.endHandle[0]);
				Da.radius[1] = -1.0;  /*No end*/
				return C_CONTINUE;
			}
			EPINX_T ep = 0;
//			BOOL_T found = FALSE;
//			int end = Da.state==POS_1?0:1;
			if(!QueryTrack(Da.trk[0],Q_CORNU_CAN_MODIFY)
			   && !QueryTrack(Da.trk[0],Q_CAN_ADD_ENDPOINTS)) {
				InfoMessage(_("Track can't be split - so locked to endpoint"));
				return C_CONTINUE;
			}
			if (Da.trk[0] != OnTrack(&pos, FALSE, TRUE)) {
				wBeep();
				InfoMessage(_("Point not on track 1"));
				Da.state = POS_1;
				Da.selectEndPoint = 0;
				return C_CONTINUE;
			}
			t = Da.trk[0];
			if (!GetConnectedTrackParms(t, pos, ep, Da.ep[ep],FALSE)) {
				Da.state = POS_1;
				Da.selectEndPoint = 0;
				return C_CONTINUE;
			}
			Da.pos[ep] = pos;
			Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs,Da.pos[0],TRUE,
			                                   !QueryTrack(Da.trk[0],Q_IS_CORNU),QueryTrack(Da.trk[0],Q_CORNU_CAN_MODIFY),
			                                   Da.trk[0]!=NULL,Da.angle[0],Da.radius[0],Da.center[0],NULL);
		} else if (Da.state == POS_2 &&
		           (Da.cmdType == cornuCmdCreateTrack || Da.cmdType == cornuCmdHotBar)
		           && !Da.trk[1]) {  //OK for CreateCornu -> No track selected
			if (IsClose(FindDistance(pos,Da.pos[1]))) { return C_CONTINUE; }
			Da.selectEndPoint = 1;
			Da.angle[1] = NormalizeAngle(FindAngle(Da.pos[1],pos)+180);
			Da.radius[1] = 0.0;  /*No end*/
			Da.ep1Segs_da_cnt = createEndPoint(Da.ep2Segs,Da.pos[1],TRUE,TRUE,TRUE,FALSE,
			                                   Da.angle[1],0.0,zero,&Da.endHandle[1]);
			SetUpCornuParms(&cp);
			if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
			else { Da.crvSegs_da_cnt = 0; }
			CreateBothEnds(-1,-1,-1,-1);
			Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
			return C_CONTINUE;
		} else {	//Second Point Has Been Created and aligned
			return AdjustCornuCurve( action&0xFF, pos, InfoMessage );
		}
		return C_CONTINUE;

	case C_UP:
		if (Da.state == POS_1 && (Da.cmdType == cornuCmdCreateTrack
		                          || Da.cmdType == cornuCmdHotBar || Da.trk[0])) {
			Da.state = LOC_2;
			Da.selectEndPoint = -1;
			if (Da.cmdType == cornuCmdCreateTrack || Da.cmdType == cornuCmdHotBar) {
				if (Da.cmdType == cornuCmdCreateTrack) {
					InfoMessage( _("Pick other end of Cornu") );
				} else {
					InfoMessage(
					        _("Select flextrack ends or anchors and drag, Enter to approve, Esc to Cancel") );
				}
				Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0],FALSE,TRUE,TRUE,FALSE,
				                                   0.0,0.0,zero,NULL);
				return C_CONTINUE;
			}
			InfoMessage(
			        _("Put other end of Cornu on a track with an unconnected end point") );
			if (Da.trk[0])
				Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0], FALSE,
				                                   !QueryTrack(Da.trk[0],Q_IS_CORNU),QueryTrack(Da.trk[0],Q_CORNU_CAN_MODIFY),
				                                   Da.trk[0]!=NULL,Da.angle[0],Da.radius[0],Da.center[0],NULL);
			else {
				Da.ep1Segs_da_cnt = createEndPoint(Da.ep1Segs, Da.pos[0], FALSE,TRUE,TRUE,FALSE,
				                                   Da.angle[0],Da.radius[0],Da.center[0],&Da.endHandle[0]);
			}
			return C_CONTINUE;
		} else if (Da.state == POS_2 && (Da.cmdType == cornuCmdCreateTrack
		                                 || Da.cmdType == cornuCmdHotBar || Da.trk[1] )) {
			Da.state = PICK_POINT;
			Da.selectEndPoint = -1;
			Da.prevEndPoint = 1;
			Da.prevSelected = -1;
			SetUpCornuParms(&cp);
			if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
			else { Da.crvSegs_da_cnt = 0; }
			CreateBothEnds(-1,-1,-1,-1);
			Da.minRadius = CornuMinRadius(Da.pos,Da.crvSegs_da);
			return C_CONTINUE;
		} else {
			return AdjustCornuCurve( action&0xFF, pos, InfoMessage );
		}
		return C_CONTINUE;
		break;
	case C_TEXT:
		if (Da.state != PICK_POINT)	{ return C_CONTINUE; }
		if ((action>>8 == 127) || (action>>8 == 8)) { //
			return AdjustCornuCurve(action, pos, InfoMessage);
		}
		if (!(action>>8 == 32 )) { //Space is same as Enter.
			return C_CONTINUE;
		}
	/* no break */
	case C_OK:
		if (Da.state != PICK_POINT) { return C_CONTINUE; }
		STATUS_T rc = AdjustCornuCurve( C_OK, pos, InfoMessage);
		if (rc == C_TERMINATE) {
			Da.state = NONE;
			Da.ep1Segs_da_cnt = 0;
			Da.ep2Segs_da_cnt = 0;
			Da.crvSegs_da_cnt = 0;
			for (int i=0; i<2; i++) {
				Da.radius[i] = 0.0;
				Da.angle[i] = 0.0;
				Da.center[i] = zero;
				Da.trk[i] = NULL;
				Da.ep[i] = -1;
				Da.pos[i] = zero;
				Da.endHandle[i].end_valid = FALSE;
			}
			SetAllTrackSelect( FALSE );
		}
		return rc;

	case C_REDRAW:
		wSetCursor(mainD.d,defaultCursor);
		DrawHighlightBoxes(FALSE,FALSE,NULL);
		HighlightSelectedTracks(NULL, TRUE, TRUE);
		if ( Da.state != NONE ) {
			DrawCornuCurve(NULL,Da.ep1Segs,Da.ep1Segs_da_cnt,Da.ep2Segs,Da.ep2Segs_da_cnt,
			               &DYNARR_N(trkSeg_t,Da.crvSegs_da,0),Da.crvSegs_da_cnt, NULL,
			               Da.extend[0]?&Da.extendSeg[0]:NULL,Da.extend[1]?&Da.extendSeg[1]:NULL,
			               &DYNARR_N(trkSeg_t,Da.midSegs,0),Da.midSegs.cnt,wDrawColorBlack);
		}
		DrawSegsDA( &tempD, NULL, zero, 0.0, &anchors_da, trackGauge, wDrawColorBlack,
		            0 );
		if (MyGetKeyState()&WKEY_SHIFT) { DrawHighlightBoxes(FALSE,FALSE,NULL); }

		if (Da.state == POINT_PICKED) { wSetCursor(mainD.d,wCursorNone); }

		return C_CONTINUE;

	case C_CANCEL:
		if (Da.state != NONE) {
			Da.ep1Segs_da_cnt = 0;
			Da.ep2Segs_da_cnt = 0;
			Da.crvSegs_da_cnt = 0;
			for (int i=0; i<2; i++) {
				Da.radius[i] = 0.0;
				Da.angle[i] = 0.0;
				Da.center[i] = zero;
				Da.trk[i] = NULL;
				Da.ep[i] = -1;
				Da.pos[i] = zero;
				Da.endHandle[i].end_valid = FALSE;
			}
			//DYNARR_FREE(trkSeg_t,Da.crvSegs_da);
		}
		SetAllTrackSelect( FALSE );
		Da.state = NONE;
		if (infoSubst) {
			InfoSubstituteControls( NULL, NULL );
			infoSubst = FALSE;
		}
		return C_CONTINUE;

	default:

		return C_CONTINUE;
	}
	return C_CONTINUE;
}

BOOL_T GetTracksFromCornuTrack(track_p trk, track_p newTracks[2])
{
	track_p trk_old = NULL;
	newTracks[0] = NULL, newTracks[1] = NULL;
	struct extraDataCornu_t * xx = GET_EXTRA_DATA(trk, T_CORNU, extraDataCornu_t);
	if (!IsTrack(trk)) { return FALSE; }
	for (int i=0; i<xx->arcSegs.cnt; i++) {
		track_p bezTrack[2];
		bezTrack[0] = NULL, bezTrack[1] = NULL;
		trkSeg_p seg = &DYNARR_N(trkSeg_t,xx->arcSegs,i);
		if (seg->type == SEG_BEZTRK) {
			DYNARR_RESET(trkSeg_t,seg->bezSegs);
			FixUpBezierSeg(seg->u.b.pos,seg,TRUE);
			GetTracksFromBezierSegment(seg, bezTrack, trk);
			if (newTracks[0] == NULL) { newTracks[0] = bezTrack[0]; }
			newTracks[1] = bezTrack[1];
			if (trk_old) {
				for (int i=0; i<2; i++) {
					if (GetTrkEndTrk(trk_old,i)==NULL) {
						coOrd pos = GetTrkEndPos(trk_old,i);
						EPINX_T ep_n = PickUnconnectedEndPoint(pos,bezTrack[0]);
						if ((connectDistance >= FindDistance(GetTrkEndPos(trk_old,i),
						                                     GetTrkEndPos(bezTrack[0],ep_n))) &&
						    (connectAngle >= fabs(DifferenceBetweenAngles(GetTrkEndAngle(trk_old,i),
						                          GetTrkEndAngle(bezTrack[0],ep_n)+180))) ) {
							ConnectTracks(trk_old,i,bezTrack[0],ep_n);
							break;
						}
					}
				}
			}
			trk_old = newTracks[1];
		} else {
			track_p new_trk = NULL;
			if (seg->type == SEG_CRVTRK) {
				new_trk = NewCurvedTrack(seg->u.c.center,seg->u.c.radius,seg->u.c.a0,
				                         seg->u.c.a1,0);
			} else if (seg->type == SEG_STRTRK) {
				new_trk = NewStraightTrack(seg->u.l.pos[0],seg->u.l.pos[1]);
			}
			if (newTracks[0] == NULL) { newTracks[0] = new_trk; }
			CopyAttributes( trk, new_trk );
			newTracks[1] = new_trk;
			if (trk_old) {
				for (int i=0; i<2; i++) {
					if (GetTrkEndTrk(trk_old,i)==NULL) {
						coOrd pos = GetTrkEndPos(trk_old,i);
						EPINX_T ep_n = PickUnconnectedEndPoint(pos,new_trk);
						if ((connectDistance >= FindDistance(GetTrkEndPos(trk_old,i),
						                                     GetTrkEndPos(new_trk,ep_n))) &&
						    (connectAngle >= fabs(DifferenceBetweenAngles(GetTrkEndAngle(trk_old,i),
						                          GetTrkEndAngle(new_trk,ep_n)+180)))) {
							ConnectTracks(trk_old,i,new_trk,ep_n);
							break;
						}
					}
				}
			}
			trk_old = new_trk;
		}
	}
	return TRUE;

}

static STATUS_T cmdCornuCreate(
        wAction_t action,
        coOrd pos )
{
	static int createState = 0;
	int rc = 0;

	switch(action&0xFF) {

	case C_DOWN:
		return CmdCornu(C_DOWN,pos);
	case C_UP:
		rc = CmdCornu(C_UP,pos);
		return rc;
	case C_FINISH:
		if (createState != 0 ) {
			createState = 0;
			CmdCornu( C_OK, pos );
		} else {
			CmdCornu( C_CANCEL, pos );
		}
		Da.prevSelected = -1;
		Da.selectEndHandle = -1;
		Da.selectEndPoint = -1;
		Da.selectMidPoint = -1;
		Da.selectTrack = NULL;
		Da.trk[0] = NULL; Da.trk[1] = NULL;
		Da.radius[0] = Da.radius[1] = -1.0;
		Da.angle[0] = Da.angle[1] = 0.0;
		Da.ends[0] = Da.ends[1] = FALSE;
		Da.endHandle[0].end_valid = Da.endHandle[1].end_valid = FALSE;
		return C_TERMINATE;
	case C_TEXT:
		if ((action>>8) != ' ' && (action>>8) != 32) {
			return CmdCornu(action,pos);
		}
	/*no break*/
	case C_OK:
		CmdCornu(C_OK,pos);
		MainRedraw();
		return C_CONTINUE;
	case C_CANCEL:
		HotBarCancel();
		CmdCornu(C_CANCEL, pos);
		createState = 0;
		rc = C_TERMINATE;
	/* no break */
	case C_START:
		createState = 0;
		commandContext = I2VP(cornuCmdHotBar);
		rc = CmdCornu(C_START, pos);
		Da.prevSelected = -1;
		Da.selectEndHandle = -1;
		Da.selectEndPoint = -1;
		Da.selectMidPoint = -1;
		Da.selectTrack = NULL;
		Da.trk[0] = NULL; Da.trk[1] = NULL;
		Da.radius[0] = Da.radius[1] = -1.0;
		Da.angle[0] = Da.angle[1] = 0.0;
		Da.ends[0] = Da.ends[1] = FALSE;
		Da.endHandle[0].end_valid = Da.endHandle[1].end_valid = FALSE;
		return rc;
	default:
		return CmdCornu(action,pos);
	}
	return C_CONTINUE;
}

static STATUS_T CmdConvertTo(
        wAction_t action,
        coOrd pos )
{
	static track_p trk;
	cornuParm_t cp;
	switch (action) {

	case wActionMove:
		if ((trk = OnTrack(&pos,FALSE,TRUE)) == NULL) { return C_CONTINUE; }
		if (!QueryTrack(trk, Q_CORNU_CAN_MODIFY) &&  //Not Fixed Track/Turnout/Turntable
		    !QueryTrack(trk, Q_IGNORE_EASEMENT_ON_EXTEND )) {
			trk = NULL;
		}
		return C_CONTINUE;

	case C_LCLICK:
		if ((trk = OnTrack(&pos,FALSE,TRUE))!=NULL) {
			SetTrkBits(trk,TB_SELECTED);
			selectedTrackCount = 1;
		} else {
			wBeep();
			InfoMessage( _("Not on a Track") );
			return C_CONTINUE;
		}
		trk = NULL;

	/* no break */
	case C_START:
		if (selectedTrackCount==0) {
			InfoMessage( _("Select a Track To Convert") );
			return C_CONTINUE;
		} else if (selectedTrackCount>1) {
			if (NoticeMessage(_("Convert all Selected Tracks to Cornu Tracks?"), _("Yes"),
			                  _("No"))<=0) {
				SetAllTrackSelect(FALSE);
				return C_TERMINATE;
			}
		}
		UndoStart( _("Convert Cornu"),"newCornu curves");
		trk = NULL;
		int converted=0, not_convertable = 0, created=0, deleted=0;
		DYNARR_RESET(track_p,Da.tracks);
		while ( TrackIterate( &trk ) ) {
			if (!GetTrkSelected( trk )) { continue; }		//Only selected
			if (!QueryTrack(trk, Q_CORNU_CAN_MODIFY) &&  //Not Fixed Track/Turnout/Turntable
			    !QueryTrack( trk, Q_IGNORE_EASEMENT_ON_EXTEND )) { //But Yes to Easement
				not_convertable++;
				continue;
			}
			converted++;
			DYNARR_RESET(trkSeg_t,Da.crvSegs_da);
			Da.ep1Segs_da_cnt = 0;
			Da.ep2Segs_da_cnt = 0;
			DYNARR_RESET( trkSeg_t*, Da.midSegs );
			Da.extend[0] = FALSE;
			Da.extend[1] = FALSE;
			Da.selectEndPoint = -1;
			Da.selectTrack = NULL;
			DYNARR_RESET(coOrd,Da.mid_points);
			ClrTrkBits( trk, TB_SELECTED );          //Done with this one
			Da.selectTrack = trk;
			DYNARR_APPEND(track_p,Da.tracks,1);
			DYNARR_LAST(track_p,Da.tracks) = trk;
			Da.trk[0] = GetTrkEndTrk( trk, 0 );
			track_p prior = trk;
			if (Da.trk[0]) { Da.ep[0] = GetEndPtConnectedToMe(Da.trk[0],trk); }
			else { Da.ep[0] = -1; }
			EPINX_T ep0 = 0;
			//Move down the LHS adding tracks until no more Selected or not modifyable
			while (Da.trk[0] && GetTrkSelected( Da.trk[0]) && IsTrack(Da.trk[0])
			       && (QueryTrack(Da.trk[0], Q_CORNU_CAN_MODIFY)
			           || QueryTrack(Da.trk[0], Q_IS_CORNU)) ) {
				prior = Da.trk[0];
				ep0 = 1-Da.ep[0];
				ClrTrkBits( Da.trk[0], TB_SELECTED );          //Done with this one
				if (selectedTrackCount>0) { selectedTrackCount--; }
				DYNARR_APPEND(track_p,Da.tracks,1);
				DYNARR_LAST(track_p,Da.tracks) = prior;
				DYNARR_APPEND(coOrd,Da.mid_points,1);
				for (int i=Da.mid_points.cnt-1; i>1; i--) {
					DYNARR_N(coOrd,Da.mid_points,i) = DYNARR_N(coOrd,Da.mid_points,i-1);
				}
				DYNARR_N(coOrd,Da.mid_points,0) = GetTrkEndPos(prior,1-ep0);
				Da.trk[0] = GetTrkEndTrk( prior, ep0 );
				if (Da.trk[0]) { Da.ep[0] = GetEndPtConnectedToMe(Da.trk[0],prior); }
				else { Da.ep[0] = -1; }
				converted++;
			}
			Da.radius[0] = -1.0; //Initialize with no end
			Da.ends[0] = FALSE;
			Da.center[0] = zero;
			Da.pos[0] = GetTrkEndPos(prior,ep0);
			if (Da.trk[0] && Da.ep[0]>=0) {
				GetConnectedTrackParms(Da.trk[0],GetTrkEndPos(Da.trk[0],Da.ep[0]),0,Da.ep[0],
				                       FALSE);
			}

			//Move to RHS

			Da.trk[1] = GetTrkEndTrk( trk, 1 );
			track_p next = trk;
			EPINX_T ep1 = 1;
			if (Da.trk[1]) { Da.ep[1] = GetEndPtConnectedToMe(Da.trk[1],trk); }
			else { Da.ep[1] = -1; }
			//Move down RHS adding tracks until no more Selected or not modifyable
			while (Da.trk[1] && GetTrkSelected( Da.trk[1])
			       && (QueryTrack(Da.trk[1], Q_CORNU_CAN_MODIFY)
			           || QueryTrack(Da.trk[1], Q_IS_CORNU))) {
				next = Da.trk[1];
				ep1 = 1-Da.ep[1];
				if (selectedTrackCount>0) { selectedTrackCount--; }
				ClrTrkBits( Da.trk[1], TB_SELECTED );          //Done with this one
				DYNARR_APPEND(track_p,Da.tracks,1);
				DYNARR_LAST(track_p,Da.tracks) = next;
				DYNARR_APPEND(coOrd,Da.mid_points,1);
				DYNARR_LAST(coOrd,Da.mid_points) = GetTrkEndPos(next,1-ep1);
				Da.trk[1] = GetTrkEndTrk( next, ep1 );
				if (Da.trk[1]) { Da.ep[1] = GetEndPtConnectedToMe(Da.trk[1],next); }
				converted++;
			}
			Da.radius[1] = -1.0; //Initialize with no end
			Da.ends[1] = FALSE;
			Da.center[1] = zero;
			Da.pos[1] = GetTrkEndPos(next,ep1);
			if (Da.trk[1] && Da.ep[1]>=0) {
				GetConnectedTrackParms(Da.trk[1],GetTrkEndPos(Da.trk[1],Da.ep[1]),1,Da.ep[1],
				                       FALSE);
			}
			SetUpCornuParms(&cp);
			if (CallCornuM(Da.mid_points,Da.ends,Da.pos,&cp,&Da.crvSegs_da,TRUE)) { Da.crvSegs_da_cnt = Da.crvSegs_da.cnt; }
			else { continue; }   //Checks that a solution can be found

			// Do the deed - Create a replacement Cornu

			BOOL_T end_point[2];
			end_point[0] = TRUE;
			end_point[1] = FALSE;
			coOrd sub_pos[2];
			sub_pos[0] = Da.pos[0];
			if (Da.radius[0] == -1) { end_point[0] = FALSE; }
			track_p first_trk= NULL,trk1=NULL,trk2 = NULL;

			for (int i=0; i<Da.mid_points.cnt; i++) {
				sub_pos[1] = DYNARR_N(coOrd,Da.mid_points,i);
				if ((trk1 = CreateCornuFromPoints(sub_pos,end_point))== NULL) { continue; }
				if (Da.trk[0]) {
					CopyAttributes( Da.trk[0], trk1 );
				} else if (Da.trk[1]) {
					CopyAttributes( Da.trk[1], trk1 );
				} else {
					SetTrkScale( trk1, GetLayoutCurScale() );
					SetTrkBits( trk1, TB_HIDEDESC );
				}
				DrawNewTrack(trk1);
				if (first_trk == NULL) { first_trk = trk1; }
				if (trk2) { ConnectTracks(trk1,0,trk2,1); }
				trk2 = trk1;
				end_point[0] = FALSE;
				sub_pos[0] = DYNARR_N(coOrd,Da.mid_points,i);
			}
			sub_pos[1] = Da.pos[1];
			end_point[1] = TRUE;
			if (Da.radius[1] == -1) { end_point[1] = FALSE; }
			if ((trk1 = CreateCornuFromPoints(sub_pos,end_point)) == NULL) { continue; }
			created++;
			DrawNewTrack(trk1);
			if (Da.trk[0]) {
				CopyAttributes( Da.trk[0], trk1 );
			} else if (Da.trk[1]) {
				CopyAttributes( Da.trk[1], trk1 );
			} else {
				SetTrkScale( trk1, GetLayoutCurScale() );
				SetTrkBits( trk1, TB_HIDEDESC );
			}
			if (trk2) { ConnectTracks(trk1,0,trk2,1); }
			if (first_trk == NULL) { first_trk = trk1; }

			for (int i=0; i<2; i++) {
				if (Da.ep[i]>=0 && Da.trk[i]) {
					track_p trk_old = GetTrkEndTrk(Da.trk[i],Da.ep[i]);
					EPINX_T old_ep = GetEndPtConnectedToMe(trk_old,Da.trk[i]);
					DisconnectTracks(Da.trk[i],Da.ep[i],trk_old,old_ep);
					if (Da.ep[i]>=0 && Da.trk[i]) {
						ConnectTracks(Da.trk[i],Da.ep[i],i==0?first_trk:trk1,i);
					}
				}
			}

		}			//Find next track
		SetAllTrackSelect(FALSE);
		//Get rid of old tracks
		for (int i = 0; i<Da.tracks.cnt; i++) {
			DeleteTrack(DYNARR_N(track_p,Da.tracks,i),FALSE);
			deleted++;
		}

		UndoEnd();  //Stop accumulating
		NoticeMessage(
		        _("Tracks Counts: %d converted %d unconvertible %d created %d deleted"),_("OK"),
		        NULL,converted,not_convertable,created,deleted);

		return C_TERMINATE;

	case C_REDRAW:
		if (trk) {
			DrawTrack(trk,&tempD,wDrawColorPreviewSelected);
		}
		return C_CONTINUE;

	case C_CANCEL:
		return C_TERMINATE;

	case C_OK:
		return C_TERMINATE;

	case C_CONFIRM:
		return C_CONTINUE;

	default:
		return C_CONTINUE;
	}
}
static STATUS_T CmdConvertFrom(
        wAction_t action,
        coOrd pos )
{
	static track_p trk;
	track_p trk1;
//	track_p trk2;
	switch (action) {

	case wActionMove:
		if ((trk = OnTrack(&pos,FALSE,TRUE)) == NULL) { return C_CONTINUE; }
		if ((!(GetTrkType(trk) == T_CORNU)) ||
		    (!(GetTrkType(trk) == T_BEZIER))) {
			trk = NULL;
		}
		return C_CONTINUE;

	case C_LCLICK:
		if ((trk = OnTrack(&pos,FALSE,TRUE))!=NULL) {
			SetTrkBits(trk,TB_SELECTED);
			selectedTrackCount = 1;
			trk = NULL;
		} else {
			wBeep();
			InfoMessage( _("Not on a Track") );
			trk = NULL;
			return C_CONTINUE;
		}
	/* no break */
	case C_START:
		if (selectedTrackCount==0) {
			InfoMessage( _("Select a Cornu or Bezier Track To Convert to Fixed") );
			return C_CONTINUE;
		} else if (selectedTrackCount>1) {
			if (NoticeMessage(_("Convert all Selected Tracks to Fixed Tracks?"), _("Yes"),
			                  _("No"))<=0) {
				SetAllTrackSelect(FALSE);
				return C_TERMINATE;
			}
		}
//			dynArr_t trackSegs_da;
//			DYNARR_RESET(trkSeg_t,trackSegs_da);
		trk1 = NULL;
//			trk2 = NULL;
		trk = NULL;
		UndoStart( _("Convert Bezier and Cornu"),"Try to convert all selected tracks");
		track_p tracks[2];
		DYNARR_RESET(track_p,Da.tracks);
		int converted=0, not_convertable = 0, deleted=0;
//			int created=0;
		while ( TrackIterate( &trk1 ) ) {
			if ( GetTrkSelected( trk1 ) && IsTrack( trk1 ) ) {
				//Only Cornu or Bezier
				tracks[0] = NULL, tracks[1] = NULL;
				if (selectedTrackCount>0) { selectedTrackCount--; }
				ClrTrkBits( trk1, TB_SELECTED );          //Done with this one
				if (GetTrkType(trk1) == T_CORNU) {
					GetTracksFromCornuTrack(trk1,tracks);
					DYNARR_APPEND(track_p,Da.tracks,1);
					DYNARR_LAST(track_p,Da.tracks) = trk1;
					converted++;
				} else if (GetTrkType(trk1) == T_BEZIER) {
					GetTracksFromBezierTrack(trk1,tracks);
					DYNARR_APPEND(track_p,Da.tracks,1);
					DYNARR_LAST(track_p,Da.tracks) = trk1;
					converted++;
				} else {
					not_convertable++;
					continue;
				}
				for (int i=0; i<2; i++) {
					track_p trk2 = GetTrkEndTrk(trk1,i);
					if (trk2) {
						EPINX_T ep1 = GetEndPtConnectedToMe( trk2, trk1 );
						DisconnectTracks(trk2,ep1,trk1,i);
						pos = GetTrkEndPos(trk2,ep1);
						for (int j=0; j<2; j++) {
							EPINX_T ep2 = PickUnconnectedEndPointSilent( pos, tracks[j] );
							coOrd ep_pos;
							if (ep2<0) { continue; }
							ep_pos = GetTrkEndPos(tracks[j],ep2);
							if (connectDistance>=FindDistance(pos,ep_pos) &&
							    connectAngle >= fabs(DifferenceBetweenAngles(GetTrkEndAngle(tracks[j],ep2),
							                         GetTrkEndAngle(trk2,ep1)+180))) {
								ConnectTracks(trk2,ep1,tracks[j],ep2);
								break;
							}
						}
					}
				}
			}
		}
		SetAllTrackSelect(FALSE);
		for (int i = 0; i<Da.tracks.cnt; i++) {
			DeleteTrack(DYNARR_N(track_p,Da.tracks,i),FALSE);
			deleted++;
		}
		UndoEnd();
		NoticeMessage(_("Tracks Counts: %d converted %d unconvertible %d deleted"),
		              _("OK"),NULL,converted,not_convertable,deleted);
		return C_TERMINATE;

	case C_REDRAW:
		if (trk) {
			DrawTrack(trk,&tempD,wDrawColorPreviewSelected);
		}
		return C_CONTINUE;

	case C_CANCEL:
		return C_TERMINATE;

	case C_OK:
		return C_TERMINATE;

	case C_CONFIRM:
		return C_CONTINUE;

	default:
		return C_CONTINUE;
	}
}

#include "bitmaps/convert-to.xpm3"
#include "bitmaps/convert-from.xpm3"

EXPORT void InitCmdCornu( wMenu_p menu )
{
	ButtonGroupBegin( _("Convert"), "cmdConvertSetCmd", _("Convert") );
	AddMenuButton( menu, CmdConvertTo, "cmdConvertTo", _("Convert To Cornu"),
	               wIconCreatePixMap(convert_to_xpm3[iconSize]), LEVEL0_50,
	               IC_STICKY|IC_LCLICK|IC_POPUP3|IC_WANT_MOVE,ACCL_CONVERTTO, NULL );
	AddMenuButton( menu, CmdConvertFrom, "cmdConvertFrom", _("Convert From Cornu"),
	               wIconCreatePixMap(convert_from_xpm3[iconSize]), LEVEL0_50,
	               IC_STICKY|IC_LCLICK|IC_POPUP3|IC_WANT_MOVE,ACCL_CONVERTFR, NULL );
	cornuHotBarCmdInx = AddMenuButton(menu, cmdCornuCreate, "cmdCornuCreate", "",
	                                  NULL, LEVEL0_50, IC_STICKY|IC_POPUP3|IC_WANT_MOVE, 0, NULL);
	ButtonGroupEnd();
	ParamCreateControls( &cornuModPG, cornuModDlgUpdate) ;
}