summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
commita7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 (patch)
tree41c4deec1fdfbafd7821b4ca7a9772ac0abd92f5 /README
Imported Upstream version 2.9.3upstream/2.9.3
Diffstat (limited to 'README')
-rw-r--r--README156
1 files changed, 156 insertions, 0 deletions
diff --git a/README b/README
new file mode 100644
index 0000000..1d58b89
--- /dev/null
+++ b/README
@@ -0,0 +1,156 @@
+
+ ------------------------------
+ ipmiutil README
+ IPMI Management Utilities
+ ------------------------------
+
+The ipmiutil IPMI utilities below allow the user to access the firmware
+System Event Log and configure the Platform Event Filter table for the new
+'OS Critical Stop' records, as well as other common IPMI system management
+functions.
+
+ipmiutil - a meta-command to invoke all of the below as sub-commands
+ievents - a standalone utility to interpret IPMI and PET event data
+isel - show/set the firmware System Event Log records
+isensor - show Sensor Data Records, sensor readings, and thresholds
+ireset - cause the BMC to hard reset or power down the system
+ilan - show and configure the BMC LAN port and Platform Event Filter
+ table to allow BMC LAN alerts from firmware events and
+ OS Critical Stop messages,
+iserial - show and configure the BMC Serial port for various modes,
+ such as Terminal Mode.
+ifru - show the FRU chassis, board, and product inventory data,
+ and optionally write a FRU asset tag.
+ialarms - show and set front panel alarms (LEDs and relays)
+iwdt - show and set watchdog timer parameters
+igetevent - receive any IPMI events and display them
+ihealth - check and report the basic health of the IPMI BMC
+iconfig - list/save/restore the BMC configuration parameters
+icmd - send specific IPMI commands to the BMC,
+ mainly for testing and debug purposes.
+idiscover - discover the available IPMI LAN nodes on a subnet
+isol - start/stop an IPMI Serial-Over-LAN Console session
+ipicmg - show/set the IPMI PICMG parameters
+ifirewall - show/set the IPMI firmware firewall configuration
+iekanalyzer - run FRU-EKeying analyzer on FRU files
+ifwum - OEM firmware update manager extensions
+ihpm - HPM firmware update manager extensions
+isunoem - Sun OEM functions
+idelloem - Dell OEM functions
+itsol - Tyan SOL console start/stop session
+idcmi - get/set DCMI parameters, if supporting the DCMI spec
+
+Other supporting files:
+checksel = cron script using ipmiutil sel to check the SEL, write new
+ events to the OS system log, and clear the SEL if nearly full.
+ipmi_port = daemon to bind the RMCP port and sleep to prevent
+ Linux portmap from stealing the RMCP port
+ipmi_port.sh = init script to reserve the RMCP port from portmap,
+ this also restores saved sensor thresholds, if any.
+ipmiutil_wdt = init script to restart watchdog timer every 60 sec via cron
+ipmiutil_asy = init script runs 'ipmiutil getevt -a' for remote shutdown
+ipmiutil_evt = init script runs 'ipmiutil getevt -s' for monitoring events
+evt.sh = sample script which can be invoked by ipmiutil_evt
+ipmi_if.sh = script using dmidecode to determine the IPMI Interface Type
+bmclanpet.mib = SNMP MIB for BMC LAN Platform Event Traps
+test/* = scripts and utilities used in testing ipmiutil/panicsel
+kern/* = kernel patches for panic handling
+
+--------------------
+ Dependencies:
+--------------------
+The IPMI Management Utilities currently work with platforms that
+support the IPMI 1.5 or 2.0 specification. IPMI servers can be managed
+locally, or remotely via IPMI LAN, even when the OS or main CPU is not
+functional.
+
+The IPMI 1.5 spec, Table 36-3 defines the sensor types for SEL records,
+as used by showsel.
+The IPMI 1.5 spec, Table 15-2 defines the Platform Event Filter table
+entries, as used by pefconfig.
+The IPMI 1.5 spec, Table 19-4 defines the LAN Configuration Parameters,
+as used by pefconfig.
+
+The ipmiutil utilities will use an IPMI Driver, either the Intel IPMI package
+(ipmidrvr, /dev/imb), MontaVista OpenIPMI (/dev/ipmi0), the valinux IPMI
+Driver (/dev/ipmikcs), or the LANDesk ldipmi daemon. The ipmiutil utilities
+can also use direct user-space I/Os in Linux or FreeBSD if no IPMI driver
+is detected.
+
+If ipmiutil is compiled with LANPLUS enabled, then it does depend upon
+libcrypto.so, which is provided by the openssl package.
+
+------------------------
+ Build Instructions
+------------------------
+
+See notes in the INSTALL file from the ipmiutil*.tar.gz archive.
+
+------------------------
+ IPMI Configuration
+------------------------
+See http://ipmiutil.sourceforge.net/docs/UserGuide
+
+Note that ipmiutil can autodetect the IPMI interface using SMBIOS/dmi
+and use driverless KCS or SSIF if no IPMI driver is loaded.
+
+Various vendor IPMI firmware versions should support all of the
+mandatory IPMI functions, but there are variations in which of
+the optional IPMI functions that are supported.
+
+The 'ipmiutil lan' utility can be used to easily set up a working
+configuration of BMC LAN, SOL, and PEF Alerting while Linux is running,
+instead of a series of 40-50 commands with ipmitool, or a proprietary
+vendor tool, which may even require booting to DOS.
+
+The bmc_panic patch has been obsoleted by the CONFIG_IPMI_PANIC option
+in the OpenIPMI driver, which is included in kernel.org.
+The bmc_panic functionality is also included in the Intel imb IPMI driver
+build 28 and greater.
+To apply the bmc_panic patch (in kern/) to a different version of kernel source:
+ kver=2.4.18
+ cd /usr/src/linux-${kver}
+ cat bmcpanic-${kver}.patch | patch -p1
+ make menuconfig (make sure CONFIG_BMCPANIC=y)
+ make oldconfig
+ make dep
+ make bzImage
+ make modules
+ make modules_install
+ mkinitrd -f /boot/initrd-${kver}.img ${kver}
+ make install
+ reboot
+
+The ipmiutil package does not set the Linux kernel panic timeout.
+If a specific panic timeout is desired, do
+"echo 10 >/proc/sys/kernel/panic" to set it to 10 seconds, for instance.
+or add panic=10 to the kernel line in grub.conf.
+
+------------------------------
+ KNOWN PROBLEMS
+------------------------------
+
+See http://sourceforge.net/tracker/?group_id=116222&func=browse for
+a list of bugs.
+
+Contact for best-effort support: arcress at users.sourceforge.net or
+ipmiutil-developers at lists.sourceforge.net or http://ipmiutil.sf.net
+
+--------------------
+ LICENSING:
+--------------------
+The BSD License in the COPYING file applies to all source files
+herein, except for
+ * util/md5.c (Aladdin unrestricted license, compatible with BSD)
+ * util/md2.h (GPL)
+ * util/ipmi_ioctls.h (GPL, now defunct and removed)
+While the BSD License allows code reuse in both open and non-open
+applications, the md2.h and ipmi_ioctls.h files would have to be removed
+if used in a non-open application. There is a ALLOW_GPL compile flag
+for this that is disabled by default, but can be enabled for GPL
+open-source by running "./configure --enable-gpl".
+
+--------------------
+ CHANGE HISTORY:
+--------------------
+See http://ipmiutil.sourceforge.net/docs/ChangeLog