summaryrefslogtreecommitdiff
path: root/doc/ifruset.8
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
commita7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 (patch)
tree41c4deec1fdfbafd7821b4ca7a9772ac0abd92f5 /doc/ifruset.8
Imported Upstream version 2.9.3upstream/2.9.3
Diffstat (limited to 'doc/ifruset.8')
-rw-r--r--doc/ifruset.8122
1 files changed, 122 insertions, 0 deletions
diff --git a/doc/ifruset.8 b/doc/ifruset.8
new file mode 100644
index 0000000..9f72eda
--- /dev/null
+++ b/doc/ifruset.8
@@ -0,0 +1,122 @@
+.TH IFRUSET 8 "Version 1.0: 14 Apr 2010"
+.SH NAME
+ifruset \- show/set Field Replacable Unit configuration data
+.SH SYNOPSIS
+.B "ifruset [-bcimx -unpvsafo -N node -U user -P/-R pswd -EFJTVY]"
+
+.SH DESCRIPTION
+.I ifruset
+is a program that uses IPMI commands to
+show FRU configuration data and optionally
+write any Product area fields into the FRU data.
+Setting the FRU Product area fields is a function
+that might be done by a manufacturer or system integrator.
+This utility can use either the /dev/ipmi0 driver from OpenIPMI,
+the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux,
+direct user-space IOs, or the IPMI LAN interface if -N.
+
+This program is not built or installed by default.
+Integrators who wish to use it should build ipmiutil from source,
+then do 'cd util; make ifruset'.
+
+.SH OPTIONS
+Command line options are described below.
+.IP "-u manuf"
+This option specifies a product manufacturer string to be written
+to the baseboard FRU Product area field 0. This field can be
+any string up to 20 characters. The default is to not modify this FRU field.
+.IP "-n name"
+This option specifies a product name string to be written
+to the baseboard FRU Product area field 1. This field can be
+any string up to 20 characters. The default is to not modify this FRU field.
+.IP "-p partnum"
+This option specifies a product part number string to be written
+to the baseboard FRU Product area field 2. This field can be
+any string up to 20 characters. The default is to not modify this FRU field.
+.IP "-v prod_ver"
+This option specifies a product version number string to be written
+to the baseboard FRU Product area field 3. The version number can be
+any string up to 20 characters. The default is to not modify this FRU field.
+.IP "-s serial_num"
+This option specifies a serial number string to be written
+to the baseboard FRU Product area field 4. The serial number can be
+any string up to 20 characters. The default is to not modify this FRU field.
+.IP "-a asset_string"
+This option specifies an asset tag string to be written
+to the baseboard FRU Product area field 5. The asset tag length is
+limited by the existing FRU Product data, but is usually
+allowed up to 20 characters. The default is to not modify this FRU field.
+.IP "-f fruid"
+This option specifies a product FRU file ID string to be written
+to the baseboard FRU Product area field 6. This field can be
+any string up to 20 characters.
+.IP "-o oem"
+This option specifies a product OEM field string to be written
+to the baseboard FRU Product area field 7. This field can be
+any string up to 20 characters.
+
+.IP "-b"
+Only show the Baseboard FRU data. The default behavior is to also scan
+for any SDR FRU data or DIMM SPD data referenced by the SDRs.
+.IP "-c"
+Show FRU output in a canonical format, with a default delimiter of '|'.
+.IP "-i 00"
+This option specifies a specific FRU ID to show. The input value should be
+in hex (0b, 1a, etc.), as shown from the sensor SDR output.
+By default, all FRU IDs that are specified in the FRU locator SDRs are shown.
+.IP "-m 002000"
+Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00).
+This could be used for PICMG or ATCA blade systems.
+The trailing character, if present, indicates SMI addressing if 's',
+or IPMB addressing if 'i' or not present.
+.IP "-x"
+Causes eXtra debug messages to be displayed.
+.IP "-N nodename"
+Nodename or IP address of the remote target system. If a nodename is
+specified, IPMI LAN interface is used. Otherwise the local system
+management interface is used.
+.IP "-U rmt_user"
+Remote username for the nodename given. The default is a null username.
+.IP "-P/-R rmt_pswd"
+Remote password for the nodename given. The default is a null password.
+.IP "-E"
+Use the remote password from Environment variable IPMI_PASSWORD.
+.IP "-F drv_t"
+Force the driver type to one of the followng:
+imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
+Note that lan2i means lan2 with intelplus.
+The default is to detect any available driver type and use it.
+.IP "-J"
+Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
+1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
+5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
+Default is 3.
+.IP "-T"
+Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
+.IP "-V"
+Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
+.IP "-Y"
+Yes, do prompt the user for the IPMI LAN remote password.
+Alternatives for the password are -E or -P.
+
+
+.SH "SEE ALSO"
+ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8)
+
+.SH WARNINGS
+See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
+
+.SH COPYRIGHT
+Copyright (C) 2009 Kontron America, Inc.
+.PP
+See the file COPYING in the distribution for more details
+regarding redistribution.
+.PP
+This utility is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY.
+
+.SH AUTHOR
+.PP
+Andy Cress <arcress at users.sourceforge.net>
+.br
+