Imported Upstream version 2.9.3upstream/2.9.3

1 files changed, 93 insertions, 0 deletions

diff --git a/doc/ihealth.8 b/doc/ihealth.8
new file mode 100644
index 0000000..8d510f4
--- /dev/null
+++ b/doc/ihealth.8
@@ -0,0 +1,93 @@
+.TH IHEALTH 8 "Version 1.1: 17 Feb 2010"
+.SH NAME
+ipmiutil_health\- show IPMI health
+.SH SYNOPSIS
+.B "ipmiutil health [-ifhglmnopqsx -N node -U user -P/-R pswd -EFJTVY]"
+
+.SH DESCRIPTION
+.I ipmiutil health
+is a program that uses IPMI commands to
+show the health of the BMC.
+This utility can use either the /dev/ipmi0 driver from OpenIPMI,
+the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux,
+direct user-space IOs, or the IPMI LAN interface if \-N.
+
+.SH OPTIONS
+Command line options are described below.
+
+.IP "-c"
+Show canonical, delimited output.
+.IP "-f"
+Show the FRUSDR version also.
+.IP "-g"
+Show the IPMI GUID of this system.  The GUID is a read-only unique identifier.
+.IP "-h"
+Check the health of the HotSwap Controller also.
+.IP "-l"
+Show the IPMI LAN channel statistics also.
+.IP "-m 002000"
+Target a specific MC (e.g. bus 00, sa 20, lun 00).
+This could be used for PICMG or ATCA blade systems.
+The trailing character, if present, indicates SMI addressing if 's',
+or IPMB addressing if 'i' or not present.
+.IP "-n string"
+Set the System Name to this string in the IPMI System Information.
+.IP "-o string"
+Set the Primary Operating System to this string in the IPMI System Information.
+.IP "-p 1"
+Set the chassis Power restore policy, governing the desired behavior when power was lost and is restored.  Values: 0 = stay off, 1 = last state, 2 = always on.
+.IP "-q string"
+Set the Secondary Operating System to this string in the IPMI System Information.
+.IP "-s"
+Show the IPMI Session information also.
+.IP "-x"
+Causes extra debug messages to be displayed.
+.IP "-N nodename"
+Nodename or IP address of the remote target system.  If a nodename is
+specified, IPMI LAN interface is used.  Otherwise the local system
+management interface is used.
+.IP "-P/-R rmt_pswd"
+Remote password for the nodename given.  The default is a null password.
+.IP "-U rmt_user"
+Remote username for the nodename given.  The default is a null username.
+.IP "-E"
+Use the remote password from Environment variable IPMI_PASSWORD.
+.IP "-F drv_t"
+Force the driver type to one of the followng:
+imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
+Note that lan2i means lan2 with intelplus.
+The default is to detect any available driver type and use it.
+.IP "-J"
+Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
+1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
+5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
+Default is 3.
+.IP "-T"
+Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
+.IP "-V"
+Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
+.IP "-Y"
+Yes, do prompt the user for the IPMI LAN remote password.
+Alternatives for the password are \-E or \-P.
+
+
+.SH "SEE ALSO"
+ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8)
+
+.SH WARNINGS
+See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
+
+.SH COPYRIGHT
+Copyright (C) 2009  Kontron America, Inc.
+.PP
+See the file COPYING in the distribution for more details
+regarding redistribution.
+.PP
+This utility is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY.
+
+.SH AUTHOR
+.PP
+Andy Cress <arcress at users.sourceforge.net>
+.br
+