summaryrefslogtreecommitdiff
path: root/doc/isol.8
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-07-06 18:04:32 +0200
commita7f89980e5b3f4b9a74c70dbc5ffe8aabd28be28 (patch)
tree41c4deec1fdfbafd7821b4ca7a9772ac0abd92f5 /doc/isol.8
Imported Upstream version 2.9.3upstream/2.9.3
Diffstat (limited to 'doc/isol.8')
-rw-r--r--doc/isol.8133
1 files changed, 133 insertions, 0 deletions
diff --git a/doc/isol.8 b/doc/isol.8
new file mode 100644
index 0000000..7048f64
--- /dev/null
+++ b/doc/isol.8
@@ -0,0 +1,133 @@
+.TH ISOL 8 "Version 1.1: 17 Feb 2010"
+.SH NAME
+ipmiutil_sol \- an IPMI Serial-Over-LAN Console application
+
+.SH SYNOPSIS
+.B "ipmiutil sol [-acdeilorsvwxz -NUPREFJTVY]
+
+.SH DESCRIPTION
+This utility starts an IPMI Serial-Over-LAN console session.
+A Serial-over-LAN console allows the client to see and modify
+functions before the OS boots, such as BIOS setup, grub, etc.
+This utility uses either the IPMI LAN 1.5 or 2.0 SOL interface.
+The 1.5 SOL interface is specific to Intel BMCs, while any IPMI 2.0
+BMC should support 2.0 SOL.
+The target system/node must first have these parameters configured
+before SOL sessions can be started:
+.br
+- [BIOS] serial console redirection parameters,
+.br
+- [IPMI] lan and SOL parameters (see ipmiutil lan or ilan), and
+.br
+- [OS] For Linux, edit grub.conf, inittab, and securetty parameters.
+.br
+Be sure that the baud rate matches in all of the above places.
+See the ipmiutil UserGuide section 4.8 for details.
+
+.SH OPTIONS
+.IP "-a"
+Activate the SOL Console session, and enter console mode.
+Use the escape sequence ('~.') to exit the session.
+.IP "-c '^'"
+Set the escape Character to '^', or another ANSI character. This changes the
+default two-character escape sequence ('~.') to the specified single escape
+character, which will end the SOL session.
+.IP "-d"
+Deactivate the SOL Console session. Use this if the previous session
+was aborted abnormally and starting a new session gives an error.
+.IP "-e"
+Turn Encryption off in negotiation when activating a session. By default,
+encryption is on for Serial-Over-LAN console sessions.
+.IP "-l"
+Use Legacy BIOS mapping for Enter key (CR+LF) instead of just LF.
+This is needed for BIOS Setup menus and DOS, but causes an extra LF to
+occur in Linux. So, only use this option if doing BIOS or DOS changes.
+This should be seldom be needed since now the default is to automatically
+detect these menus with colored backgrounds and change the mapping.
+.IP "-i input_file"
+Use this file as an input script. The input_file will be read after the
+session is established. This can be used to automate certain tasks. The
+input_file is read one line at a time. If the input_file does not
+have an escape character (~) to end the session, then the input is
+returned to the keyboard when the file ends.
+.IP "-o output_file"
+Use a Trace log. The output_file is created and all SOL screen output is
+written to the file, including VT100 escape sequences. If the output_file
+exists, the output is appended to it. This can be used to log what the
+user has done in an SOL session.
+.IP "-r"
+Use Raw terminal I/O instead of custom VT100 to ANSI translation (in Windows).
+Use this option if the server is configured in BIOS and BMC for ANSI and
+the utility is being invoked from Windows.
+.IP "-s NNN"
+For a slow link with high latency, this adds a delay of NNN microseconds
+between sending and receiving SOL packets. The default is 100 microseconds.
+.IP "-w"
+(Windows only)
+Do not use the Windows Console buffer, but use Windows stdio instead.
+This does not handle cursor positioning correctly in some cases, however.
+.IP "-v log_file"
+Causes debug messages to be displayed to the specified debug log_file.
+The default log_file is isoldbg.log in the current directory.
+.IP "-x"
+Causes debug messages to be displayed to the debug log file.
+.IP "-z"
+Causes more verbose debug messages to be displayed to the debug log file.
+.IP "-N nodename"
+Nodename or IP address of the remote target system. If a nodename is
+specified, IPMI LAN interface is used. Otherwise the local system
+management interface is used.
+.IP "-U rmt_user"
+Remote username for the nodename given. The default is a null username.
+.IP "-P/-R rmt_pswd"
+Remote password for the nodename given. The default is a null password.
+.IP "-E"
+Use the remote password from Environment variable IPMI_PASSWORD.
+.IP "-F drv_t"
+Force the driver type to one of the followng:
+imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb.
+Note that lan2i means lan2 with intelplus.
+The default is to detect any supported driver type and use it.
+.IP "-J"
+Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
+1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128,
+5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.
+Default is 3.
+.IP "-T"
+Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
+.IP "-V"
+Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
+.IP "-Y"
+Yes, do prompt the user for the IPMI LAN remote password.
+Alternatives for the password are \-E or \-P.
+
+.SH "EXAMPLES"
+ipmiutil sol \-a \-N nodename \-U username \-P password
+.br
+Starts an SOL console session to the nodename. Detect the lan protocol.
+.PP
+ipmiutil sol \-a \-N nodename \-U username \-P password \-Flan2
+.br
+Starts an SOL console session to the nodename. Force lan protocol to 2.0.
+.PP
+
+.SH "SEE ALSO"
+ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) iwdt(8)
+
+.SH WARNINGS
+See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
+
+.SH COPYRIGHT
+Copyright (C) 2009 Kontron America, Inc.
+.PP
+See the file COPYING in the distribution for more details
+regarding redistribution.
+.PP
+This utility is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY.
+
+.SH AUTHOR
+.PP
+Andy Cress <arcress at users.sourceforge.net>
+.br
+