summaryrefslogtreecommitdiff
path: root/backend/plustek-usbcal.c
diff options
context:
space:
mode:
Diffstat (limited to 'backend/plustek-usbcal.c')
-rw-r--r--backend/plustek-usbcal.c40
1 files changed, 20 insertions, 20 deletions
diff --git a/backend/plustek-usbcal.c b/backend/plustek-usbcal.c
index f2e7608..84a4105 100644
--- a/backend/plustek-usbcal.c
+++ b/backend/plustek-usbcal.c
@@ -21,7 +21,7 @@
* or can test.
*
* Therefore, I'm splitting out a few calibration functions I need
- * to modify for the CanoScan which allows me to simplify things
+ * to modify for the CanoScan which allows me to simplify things
* greatly for the CanoScan without worrying about breaking other
* scanners, as well as reuse the vast majority of the Plustek
* driver infrastructure without forking.
@@ -109,7 +109,7 @@ cano_PrepareToReadWhiteCal( Plustek_Device *dev, SANE_Bool mv2shading_pos )
{
SANE_Bool goto_shading_pos = SANE_TRUE;
HWDef *hw = &dev->usbDev.HwSetting;
-
+
switch (strip_state) {
case 0:
if( !usb_IsSheetFedDevice(dev)) {
@@ -152,7 +152,7 @@ cano_PrepareToReadBlackCal( Plustek_Device *dev )
if( strip_state == 0 )
if(cano_PrepareToReadWhiteCal(dev, SANE_FALSE))
return SANE_FALSE;
-
+
if( strip_state != 2 ) {
/*
* if we have a dark shading strip, there's no need to switch
@@ -203,7 +203,7 @@ cano_LampOnAfterCalibration( Plustek_Device *dev )
* @param max - pointer to the max OFF point for the CIS-channel
* @param off - pointer to the current OFF point of the CIS-channel
* @param val - current value to check
- * @return returns 0 if the value is fine, 1, if we need to adjust
+ * @return returns 0 if the value is fine, 1, if we need to adjust
*/
static int
cano_adjLampSetting( u_short *min, u_short *max, u_short *off, u_short val )
@@ -249,7 +249,7 @@ cano_adjLampSetting( u_short *min, u_short *max, u_short *off, u_short val )
* coarse calibration step 0
* [Monty changes]: On the CanoScan at least, the default lamp
* settings are several *hundred* percent too high and vary from
- * scanner-to-scanner by 20-50%. This is only for CIS devices
+ * scanner-to-scanner by 20-50%. This is only for CIS devices
* where the lamp_off parameter is adjustable; I'd make it more general,
* but I only have the CIS hardware to test.
*/
@@ -305,8 +305,8 @@ cano_AdjustLightsource( Plustek_Device *dev )
min_rgb.Green = hw->green_lamp_on;
min_rgb.Blue = hw->blue_lamp_on;
- if((dev->adj.rlampoff != -1) &&
- (dev->adj.glampoff != -1) && (dev->adj.rlampoff != -1)) {
+ if((dev->adj.rlampoff != -1) &&
+ (dev->adj.glampoff != -1) && (dev->adj.blampoff != -1)) {
DBG( _DBG_INFO, "- function skipped, using frontend values!\n" );
return SANE_TRUE;
}
@@ -393,10 +393,10 @@ cano_AdjustLightsource( Plustek_Device *dev )
DBG( _DBG_INFO2, "red_lamp_off = %u/%u/%u\n",
min_rgb.Red ,hw->red_lamp_off, max_rgb.Red );
}
-
+
DBG( _DBG_INFO2, "green_lamp_off = %u/%u/%u\n",
min_rgb.Green, hw->green_lamp_off, max_rgb.Green );
-
+
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
DBG( _DBG_INFO2, "blue_lamp_off = %u/%u/%u\n",
min_rgb.Blue, hw->blue_lamp_off, max_rgb.Blue );
@@ -528,7 +528,7 @@ cano_AdjustGain( Plustek_Device *dev )
DBG( _DBG_INFO, "cano_AdjustGain()\n" );
if( !usb_InCalibrationMode(dev)) {
- if((dev->adj.rgain != -1) &&
+ if((dev->adj.rgain != -1) &&
(dev->adj.ggain != -1) && (dev->adj.bgain != -1)) {
setAdjGain( dev->adj.rgain, &dev->usbDev.a_bRegs[0x3b] );
setAdjGain( dev->adj.ggain, &dev->usbDev.a_bRegs[0x3c] );
@@ -559,11 +559,11 @@ cano_AdjustGain( Plustek_Device *dev )
DBG( _DBG_INFO2, "Pixels = %lu\n", m_ScanParam.Size.dwPixels );
DBG( _DBG_INFO2, "Bytes = %lu\n", m_ScanParam.Size.dwBytes );
DBG( _DBG_INFO2, "Origin.X = %u\n", m_ScanParam.Origin.x );
-
+
while( adj ) {
m_ScanParam.dMCLK = dMCLK;
-
+
if( !usb_SetScanParameters( dev, &m_ScanParam ))
return SANE_FALSE;
@@ -615,7 +615,7 @@ cano_AdjustGain( Plustek_Device *dev )
dwR = dwR / dwDiv;
dwG = dwG / dwDiv;
dwB = dwB / dwDiv;
-
+
if(max_rgb.Red < dwR)
max_rgb.Red = dwR;
if(max_rgb.Green < dwG)
@@ -764,7 +764,7 @@ cano_AdjustOffset( Plustek_Device *dev )
u_long *scanbuf = dev->scanning.pScanBuffer;
HWDef *hw = &dev->usbDev.HwSetting;
DCapsDef *scaps = &dev->usbDev.Caps;
-
+
if( usb_IsEscPressed())
return SANE_FALSE;
@@ -977,13 +977,13 @@ cano_AdjustDarkShading( Plustek_Device *dev, u_short cal_dpi )
/* average the n lines, compute reg values */
if( scan->sParam.bDataType == SCANDATATYPE_Color ) {
-
+
stepW = m_ScanParam.Size.dwPhyPixels;
if( usb_IsCISDevice(dev))
step = m_ScanParam.Size.dwPhyPixels + 1;
else
step = (m_ScanParam.Size.dwPhyPixels*3) + 1;
-
+
for( i=0; i<m_ScanParam.Size.dwPhyPixels; i++ ) {
red = 0;
@@ -1036,7 +1036,7 @@ cano_AdjustDarkShading( Plustek_Device *dev, u_short cal_dpi )
step = m_ScanParam.Size.dwPhyPixels + 1;
for( i=0; i<m_ScanParam.Size.dwPhyPixels; i++ ) {
-
+
gray = 0;
bufp = ((u_short *)scanbuf)+i;
@@ -1252,7 +1252,7 @@ cano_DoCalibration( Plustek_Device *dev )
DBG( _DBG_INFO2, "###### ADJUST OFFSET (COARSE) ####\n" );
if(cano_PrepareToReadBlackCal(dev))
return SANE_FALSE;
-
+
if( !cano_AdjustOffset(dev)) {
DBG( _DBG_ERROR, "Coarse Calibration failed!!!\n" );
return SANE_FALSE;
@@ -1261,7 +1261,7 @@ cano_DoCalibration( Plustek_Device *dev )
DBG( _DBG_INFO2, "###### ADJUST GAIN (COARSE)#######\n" );
if(cano_PrepareToReadWhiteCal(dev, SANE_FALSE))
return SANE_FALSE;
-
+
if( !cano_AdjustGain(dev)) {
DBG( _DBG_ERROR, "Coarse Calibration failed!!!\n" );
return SANE_FALSE;
@@ -1367,7 +1367,7 @@ cano_DoCalibration( Plustek_Device *dev )
if( !usb_IsSheetFedDevice(dev))
usb_ModuleToHome( dev, SANE_TRUE );
scan->fCalibrated = SANE_TRUE;
-
+
DBG( _DBG_INFO, "cano_DoCalibration() done\n" );
DBG( _DBG_INFO, "-------------------------\n" );
DBG( _DBG_INFO, "Static Gain:\n" );
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:20:40 +0000